Skip to contentSkip to conversation

imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.

PATCH New Adam Ford 1 participant 1 message Jul 22, 2020

Subsystems (3)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.

Beacon EmbeddedWorks, formerly known as Logic PD, is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. It is nearly identical to the i.MX8M Mini SOM already released.

It supports eMMC on the SOM, microSD on the baseboard, various GPIO, the PINCTRL, and UART.

arch/arm/dts/Makefile +1 -0
index cee10f533f..f2c4429982 100644
@@ -753,6 +753,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mn-ddr4-evk.dtb \
 	imx8mq-evk.dtb \
 	imx8mm-beacon-kit.dtb \
+	imx8mn-beacon-kit.dtb \
 	imx8mq-phanbell.dtb \
 	imx8mp-evk.dtb \
 	imx8mq-pico-pi.dtb
arch/arm/dts/imx8mn-beacon-baseboard.dtsi new file +220 -0

220 lines not on this page · raw message

arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi new file +128 -0

128 lines not on this page · raw message

arch/arm/dts/imx8mn-beacon-kit.dts new file +19 -0
new file mode 100644
index 0000000000..1392ce0258
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-beacon-som.dtsi"
+#include "imx8mn-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit";
+	compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
arch/arm/dts/imx8mn-beacon-som.dtsi new file +390 -0

390 lines not on this page · raw message

arch/arm/mach-imx/imx8m/Kconfig +8 -1
index 7771fc88af..c3daa80ad8 100644
@@ -67,11 +67,17 @@ config TARGET_VERDIN_IMX8MM
        select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_BEACON
-	bool "imx8mm Beacon Embedded devkit"
+	bool "imx8m Mini Beacon Embedded devkit"
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
+config TARGET_IMX8MN_BEACON
+	bool "imx8m Nano Beacon Embedded devkit"
+	select IMX8MN
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
 endchoice
 
 source "board/freescale/imx8mq_evk/Kconfig"
@@ -82,5 +88,6 @@ source "board/google/imx8mq_phanbell/Kconfig"
 source "board/technexion/pico-imx8mq/Kconfig"
 source "board/toradex/verdin-imx8mm/Kconfig"
 source "board/beacon/imx8mm/Kconfig"
+source "board/beacon/imx8mn/Kconfig"
 
 endif
board/beacon/imx8mn/Kconfig new file +14 -0
new file mode 100644
index 0000000000..3857d1c118
@@ -0,0 +1,14 @@
+if TARGET_IMX8MN_BEACON
+
+config SYS_BOARD
+	default "imx8mn"
+
+config SYS_VENDOR
+	default "beacon"
+
+config SYS_CONFIG_NAME
+	default "imx8mn_beacon"
+
+source "board/freescale/common/Kconfig"
+
+endif
board/beacon/imx8mn/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..e97ca48e2d
@@ -0,0 +1,6 @@
+i.MX8MN Beacon Kit
+M:	Adam Ford<[email protected]>
+S:	Maintained
+F:	board/beacon/imx8mn/
+F:	include/configs/imx8mn_beacon.h
+F:	configs/imx8mn_beacon_defconfig
board/beacon/imx8mn/Makefile new file +12 -0
new file mode 100644
index 0000000000..00d540607e
@@ -0,0 +1,12 @@
+#
+# Copyright 2020 Compass Electronics Group, LLC
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx8mn_beacon.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-y += lpddr4_timing.o
+endif
board/beacon/imx8mn/README new file +38 -0
new file mode 100644
index 0000000000..52b50c9642
@@ -0,0 +1,38 @@
+U-Boot for the Beacon EmbeddedWorks i.MX8M Nano Devkit
+
+Quick Start
+===========
+- Build the ARM Trusted firmware binary
+- Get lpddr firmware
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+======================================
+Note: $(srctree) is U-Boot source directory
+
+$ git clone https://source.codeaurora.org/external/imx/imx-atf
+$ git checkout imx_5.4.24_2.1.0
+$ make PLAT=imx8mn bl31 ARCH=aarch64 CROSS_COMPILE=aarch64-linux-gnu-
+$ cp build/imx8mm/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+====================
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin
+$ chmod +x firmware-imx-8.5.bin
+$ ./firmware-imx-8.5
+$ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Build U-Boot
+============
+$ make imx8mn_beacon_defconfig
+$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x960000
+
+Burn U-Boot to microSD Card
+===========================
+$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
+
+Boot
+====
+Set Boot switch to SD boot
+S17 (1:8) 1100xxxx
board/beacon/imx8mn/imx8mn_beacon.c new file +25 -0
new file mode 100644
index 0000000000..5ed16fca86
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+#include <common.h>
+#include <env.h>
+#include <init.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int board_late_init(void)
+{
+	return 0;
+}
board/beacon/imx8mn/lpddr4_timing.c new file +1431 -0

1,431 lines not on this page · raw message

board/beacon/imx8mn/spl.c new file +116 -0

116 lines not on this page · raw message

configs/imx8mn_beacon_defconfig new file +105 -0

105 lines not on this page · raw message

include/configs/imx8mm_beacon.h +1 -1
index ce3ba74924..c09ff92b9e 100644
@@ -61,7 +61,7 @@
 			"booti ${loadaddr} - ${fdt_addr}; " \
 		"else " \
 			"echo WARN: Cannot load the DT; " \
-		"fi; " \
+		"fi;\0" \
 	"netargs=setenv bootargs console=${console} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
include/configs/imx8mn_beacon.h new file +145 -0

145 lines not on this page · raw message

Signature · 1 line
2.25.1