hw/pci-host: save/restore pci host config register
PATCH 1/1 hw/pci-host: save/restore pci host config register
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM by pci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)
hw/pci-host/i440fx.c +11 -0
@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp)
@@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;
hw/pci-host/q35.c +11 -0
@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is
@@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data) hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize; + dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;
hw/pci/pci_host.c +11 -0
@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */
@@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,
hw/pci/pcie_host.c +11 -0
@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice *pcie_dev_find_by_mmcfg_addr(PCIBus *s,
@@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit (); } +const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent =TYPE_PCI_HOST_BRIDGE ,
include/hw/pci/pci_host.h +10 -0
@@ -70,4 +70,14 @@ extern const MemoryRegionOps pci_host_conf_be_ops;extern const MemoryRegionOps pci_host_data_le_ops;extern const MemoryRegionOps pci_host_data_be_ops; +extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */
include/hw/pci/pcie_host.h +10 -0
@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK) +extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */
Signature · 1 line
2.23.0
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.
Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>
I guess this is like v3 right?
thanks a lot for the patch!
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
Quoted 166 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c +11
-0@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp)@@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c +11
-0@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data) hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize; + dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice *pcie_dev_find_by_mmcfg_addr(PCIBus *s,@@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit (); } +const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent =TYPE_PCI_HOST_BRIDGE ,include/hw/pci/pci_host.h +10
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps pci_host_conf_be_ops;extern const MemoryRegionOps pci_host_data_le_ops;extern const MemoryRegionOps pci_host_data_be_ops; +extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +10
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK) +extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ Signature · 1 line
2.23.0
Quoted 22 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>
Quoted 7 lines
I guess this is like v3 right?
thanks a lot for the patch!
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
You need a .needed clause in the vmstate_i440fx_pcihost and vmstate_q35_pcihost which is a pointer to a function which enables it on new machine types and ignores it on old ones.
Or, if it always crashes if the SMRAM is enabled, then the migration is dead anyway; so you could make the .needed only save the config if the SMRAM is opened, so you'd get a unknown section error, which is nasty but it would only happen in the case it would crash anyway.
Dave
Quoted 153 lines
Quoted 153 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c +11
-0@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp)@@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c +11
-0@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data) hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize; + dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice *pcie_dev_find_by_mmcfg_addr(PCIBus *s,@@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit (); } +const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent =TYPE_PCI_HOST_BRIDGE ,include/hw/pci/pci_host.h +10
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps pci_host_conf_be_ops;extern const MemoryRegionOps pci_host_data_le_ops;extern const MemoryRegionOps pci_host_data_be_ops; +extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +0
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK)
Quoted 15 lines
Quoted 14 lines
include/hw/pci/pcie_host.h +10
-0+extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ Signature · 1 line
2.23.0
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 27 lines · Wang King
Quoted 26 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>I guess this is like v3 right?
thanks a lot for the patch!
Quoted 9 lines
Quoted 2 lines
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
You need a .needed clause in the
vmstate_i440fx_pcihostandvmstate_q35_pcihostwhich is a pointer to a function which enables it on new machine types and ignores it on old ones.Or, if it always crashes if the SMRAM is enabled, then the migration is dead anyway; so you could make the .needed only save the config if the SMRAM is opened, so you'd get a unknown section error, which is nasty but it would only happen in the case it would crash anyway.
Dave
It always crashes if the SMRAM is enabled, but it's just one case, config register state lost may cause other uncertain errors, so it's need on new machine types.
Quoted 170 lines
Quoted 153 lines
Quoted 153 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c index renamed from hw/pci-host/i440fx.c +0
-0
8ed2417f0c..17705bb025100644hw/pci-host/i440fx.c +11
-1@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque, Error **errp) @@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c index renamed from hw/pci-host/q35.c +0
-0
b67cb9c29f..5e323be2e3100644hw/pci-host/q35.c +10
-1@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data)
hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize;hw/pci-host/q35.c +1
-0+ dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c index renamed from hw/pci/pci_host.c +0
-0
ce7bcdb1d5..7cdd5a3ea3100644hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c index renamed from hw/pci/pcie_host.c +0
-0
3534006f99..a653c39bb7100644hw/pci/pcie_host.c +1
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice
*pcie_dev_find_by_mmcfg_addr(PCIBus *s, @@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit();}
hw/pci/pcie_host.c +10
-0+const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent = TYPE_PCI_HOST_BRIDGE, diff --git
a/include/hw/pci/pci_host.hb/include/hw/pci/pci_host.hindex9ce088bd13..fc88305e04100644include/hw/pci/pci_host.h +0
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps
pci_host_conf_be_ops; extern const MemoryRegionOpspci_host_data_le_ops; extern const MemoryRegionOpspci_host_data_be_ops;include/hw/pci/pci_host.h +10
-0+extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +0
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK)Quoted 15 lines
Quoted 12 lines
include/hw/pci/pcie_host.h +10
-1+extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ --Quoted 2 lines
2.23.0
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 33 lines · Cloud Infrastructure Service Product Dept.)
Quoted 32 lines · Wang King
Quoted 20 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.Quoted 8 lines
Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>I guess this is like v3 right?
thanks a lot for the patch!
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
You need a .needed clause in the
vmstate_i440fx_pcihostandvmstate_q35_pcihostwhich is a pointer to a function which enables it on new machine types and ignores it on old ones.
Quoted 7 lines
Quoted 4 lines
Or, if it always crashes if the SMRAM is enabled, then the migration is dead anyway; so you could make the .needed only save the config if the SMRAM is opened, so you'd get a unknown section error, which is nasty but it would only happen in the case it would crash anyway.
Dave
It always crashes if the SMRAM is enabled, but it's just one case, config register state lost may cause other uncertain errors, so it's need on new machine types.
Well, let's limit this to new machine types for now? Declaring all machine types broken is unattractive ...
Quoted 171 lines
Quoted 170 lines
Quoted 153 lines
Quoted 153 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c index renamed from hw/pci-host/i440fx.c +0
-0
8ed2417f0c..17705bb025100644hw/pci-host/i440fx.c +11
-1@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque, Error **errp) @@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c index renamed from hw/pci-host/q35.c +0
-0
b67cb9c29f..5e323be2e3100644hw/pci-host/q35.c +10
-1@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data)
hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize;hw/pci-host/q35.c +1
-0+ dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c index renamed from hw/pci/pci_host.c +0
-0
ce7bcdb1d5..7cdd5a3ea3100644hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c index renamed from hw/pci/pcie_host.c +0
-0
3534006f99..a653c39bb7100644hw/pci/pcie_host.c +1
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice
*pcie_dev_find_by_mmcfg_addr(PCIBus *s, @@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit();}
hw/pci/pcie_host.c +10
-0+const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent = TYPE_PCI_HOST_BRIDGE, diff --git
a/include/hw/pci/pci_host.hb/include/hw/pci/pci_host.hindex9ce088bd13..fc88305e04100644include/hw/pci/pci_host.h +0
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps
pci_host_conf_be_ops; extern const MemoryRegionOpspci_host_data_le_ops; extern const MemoryRegionOpspci_host_data_be_ops;include/hw/pci/pci_host.h +10
-0+extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +0
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK)Quoted 15 lines
Quoted 12 lines
include/hw/pci/pcie_host.h +10
-1+extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ --Quoted 2 lines
2.23.0
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 35 lines · Dr. David Alan Gilbert
Quoted 22 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>Quoted 7 lines
I guess this is like v3 right?
thanks a lot for the patch!
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
You need a .needed clause in the
vmstate_i440fx_pcihostandvmstate_q35_pcihostwhich is a pointer to a function which enables it on new machine types and ignores it on old ones.
Quoted 6 lines
Or, if it always crashes if the SMRAM is enabled, then the migration is dead anyway; so you could make the .needed only save the config if the SMRAM is opened, so you'd get a unknown section error, which is nasty but it would only happen in the case it would crash anyway.
Dave
Problem is we never know whether it's needed.
For example: guest programs cf8, then cfc. Guest on destination can crash if migrated after writing cf8 before writing cfc.
But in theory it can also crash if guest assumes cf8 is unchanged and just writes cfc.
So what I'd prefer to do is put it in some data that old qemu ignores. Then once qemu on destination is updated, it will start interpreting it.
Quoted 170 lines
Quoted 153 lines
Quoted 153 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c +11
-0@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp)@@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c +11
-0@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data) hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize; + dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice *pcie_dev_find_by_mmcfg_addr(PCIBus *s,@@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit (); } +const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent =TYPE_PCI_HOST_BRIDGE ,include/hw/pci/pci_host.h +10
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps pci_host_conf_be_ops;extern const MemoryRegionOps pci_host_data_le_ops;extern const MemoryRegionOps pci_host_data_be_ops; +extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +0
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK)Quoted 15 lines
Quoted 14 lines
include/hw/pci/pcie_host.h +10
-0+extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ Signature · 1 line
2.23.0--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 51 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 35 lines · Dr. David Alan Gilbert
Quoted 22 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>Quoted 7 lines
I guess this is like v3 right?
thanks a lot for the patch!
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
You need a .needed clause in the
vmstate_i440fx_pcihostandvmstate_q35_pcihostwhich is a pointer to a function which enables it on new machine types and ignores it on old ones.Quoted 6 lines
Or, if it always crashes if the SMRAM is enabled, then the migration is dead anyway; so you could make the .needed only save the config if the SMRAM is opened, so you'd get a unknown section error, which is nasty but it would only happen in the case it would crash anyway.
Dave
Problem is we never know whether it's needed.
For example: guest programs cf8, then cfc. Guest on destination can crash if migrated after writing cf8 before writing cfc.
But in theory it can also crash if guest assumes cf8 is unchanged and just writes cfc.
Quoted 3 lines
So what I'd prefer to do is put it in some data that old qemu ignores. Then once qemu on destination is updated, it will start interpreting it.
We don't have a way to do that; the choice is:
a) Not sending it for old versions, so you only get the fix for new machine types
b) Trying to second guess when it will crash
I recommend (a) generally - but the format has no
way to ignore unknown data.
Dave
Quoted 169 lines
Quoted 169 lines
Quoted 169 lines
Quoted 168 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c +11
-0@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp)@@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c +11
-0@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data) hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize; + dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice *pcie_dev_find_by_mmcfg_addr(PCIBus *s,@@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit (); } +const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent =TYPE_PCI_HOST_BRIDGE ,include/hw/pci/pci_host.h +10
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps pci_host_conf_be_ops;extern const MemoryRegionOps pci_host_data_le_ops;extern const MemoryRegionOps pci_host_data_be_ops; +extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +10
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK) +extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ Signature · 1 line
2.23.0
Quoted 3 lines
Quoted 2 lines
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 60 lines · Dr. David Alan Gilbert
Quoted 51 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 35 lines · Dr. David Alan Gilbert
Quoted 22 lines · * Michael S. Tsirkin ([email protected]) wrote:
Quoted 19 lines · Wang King
From: Hogan Wang <[email protected]>
The pci host config register is used to save PCI address for read/write config data. If guest write a value to config register, and then pause the vcpu to migrate, After the migration, the guest continue to write pci config data, and the write data will be ignored because of new qemu process lost the config register state.
Reproduction steps are:
1. guest booting in seabios.
2. guest enable the SMRAM in seabios:piix4_apmc_smm_setup, and then expect to disable the SMRAM bypci_config_writeb.
3. after guest write the pci host config register, and then pasued vcpu to finish migration.
4. guest write config data(0x0A) fail to disable the SMRAM becasue of config register state lost.
5. guest continue to boot and crash in ipxe option ROM due to SMRAM in enabled state.Quoted 1 line
Signed-off-by Hogan Wang <[email protected]>Quoted 7 lines
I guess this is like v3 right?
thanks a lot for the patch!
My question stands : does anyone see a way to pass this info around without breaking migration for all existing machine types?
You need a .needed clause in the
vmstate_i440fx_pcihostandvmstate_q35_pcihostwhich is a pointer to a function which enables it on new machine types and ignores it on old ones.Quoted 6 lines
Or, if it always crashes if the SMRAM is enabled, then the migration is dead anyway; so you could make the .needed only save the config if the SMRAM is opened, so you'd get a unknown section error, which is nasty but it would only happen in the case it would crash anyway.
Dave
Problem is we never know whether it's needed.
For example: guest programs cf8, then cfc. Guest on destination can crash if migrated after writing cf8 before writing cfc.
But in theory it can also crash if guest assumes cf8 is unchanged and just writes cfc.Quoted 3 lines
So what I'd prefer to do is put it in some data that old qemu ignores. Then once qemu on destination is updated, it will start interpreting it.
We don't have a way to do that; the choice is:
a) Not sending it for old versions, so you only get the fix for new machine types
Quoted 6 lines
b) Trying to second guess when it will crash
I recommend (a) generally - but the format has no
way to ignore unknown data.Dave
How about adding that finally, so we have a way to fix bugs like this one?
Quoted 174 lines
Quoted 169 lines
Quoted 169 lines
Quoted 169 lines
Quoted 168 lines
--- hw/pci-host/i440fx.c | 11 +++++++++++ hw/pci-host/q35.c | 11 +++++++++++ hw/pci/pci_host.c | 11 +++++++++++ hw/pci/pcie_host.c | 11 +++++++++++ include/hw/pci/pci_host.h | 10 ++++++++++ include/hw/pci/pcie_host.h | 10 ++++++++++ 6 files changed, 64 insertions(+)hw/pci-host/i440fx.c +11
-0@@ -118,6 +118,16 @@ static const VMStateDescription vmstate_i440fx = { } }; +static const VMStateDescription vmstate_i440fx_pcihost = { + .name ="I440FX_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (parent_obj, I440FXState), +VMSTATE_END_OF_LIST () + } +}; +static void i440fx_pcihost_get_pci_hole_start (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp)@@ -398,6 +408,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; + dc->vmsd = &vmstate_i440fx_pcihost;device_class_set_props (dc, i440fx_props);/* Reason: needs to be wired up by pc_init1 */ dc->user_creatable = false;hw/pci-host/q35.c +11
-0@@ -165,6 +165,16 @@ static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,visit_type_uint64 (v, name, &value, errp); } +static const VMStateDescription vmstate_q35_pcihost = { + .name ="Q35_PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCIE_HOST (parent_obj, Q35PCIHost), +VMSTATE_END_OF_LIST () + } +}; +/* * NOTE: setting defaults for the mch.* fields in this table * doesn't work, because mch is a separate QOM object that is @@ -194,6 +204,7 @@ static void q35_host_class_init(ObjectClass *klass, void *data) hc->root_bus_path = q35_host_root_bus_path; dc->realize = q35_host_realize; + dc->vmsd = &vmstate_q35_pcihost;device_class_set_props (dc, q35_host_props);/* Reason: needs to be wired up by pc_q35_init */ dc->user_creatable = false;hw/pci/pci_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pci_host.h" #include "qemu/module.h" #include "hw/pci/pci_bus.h" +#include "migration/vmstate.h" #include "trace.h" /* debug PCI */ @@ -200,6 +201,16 @@ const MemoryRegionOps pci_host_data_be_ops = { .endianness = DEVICE_BIG_ENDIAN, }; +const VMStateDescription vmstate_pcihost = { + .name ="PCIHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (config_reg, PCIHostState), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pci_host_type_info = { .name =TYPE_PCI_HOST_BRIDGE , .parent =TYPE_SYS_BUS_DEVICE ,hw/pci/pcie_host.c +11
-0@@ -24,6 +24,7 @@#include "hw/pci/pcie_host.h" #include "qemu/module.h" #include "exec/address-spaces.h" +#include "migration/vmstate.h" /* a helper function to get a PCIDevice for a given mmconfig address */ static inline PCIDevice *pcie_dev_find_by_mmcfg_addr(PCIBus *s,@@ -121,6 +122,16 @@ void pcie_host_mmcfg_update(PCIExpressHost *e,memory_region_transaction_commit (); } +const VMStateDescription vmstate_pciehost = { + .name ="PCIEHost" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []) { +VMSTATE_PCI_HOST (pci, PCIExpressHost), +VMSTATE_END_OF_LIST () + } +}; +static const TypeInfo pcie_host_type_info = { .name =TYPE_PCIE_HOST_BRIDGE , .parent =TYPE_PCI_HOST_BRIDGE ,include/hw/pci/pci_host.h +10
-0@@ -70,4 +70,14 @@ extern const MemoryRegionOps pci_host_conf_be_ops;extern const MemoryRegionOps pci_host_data_le_ops;extern const MemoryRegionOps pci_host_data_be_ops; +extern const VMStateDescription vmstate_pcihost; + +#define VMSTATE_PCI_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIHostState), \ + .vmsd = &vmstate_pcihost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIHostState),\ +} +#endif /* PCI_HOST_H */ include/hw/pci/pcie_host.h +10
-0@@ -78,4 +78,14 @@ void pcie_host_mmcfg_update(PCIExpressHost *e, PCIE_MMCFG_DEVFN_MASK)#define PCIE_MMCFG_CONFOFFSET (addr) ((addr) & PCIE_MMCFG_CONFOFFSET_MASK) +extern const VMStateDescription vmstate_pciehost; + +#define VMSTATE_PCIE_HOST (_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(PCIExpressHost), \ + .vmsd = &vmstate_pciehost, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, PCIExpressHost),\ +} +#endif /* PCIE_HOST_H */ Signature · 1 line
2.23.0Quoted 3 lines
Quoted 2 lines
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK