Skip to contentSkip to conversation

Add frequency / voltage scaling support for IPQ6018 SoC

PATCH In review Kathiravan T 4 participants 9 messages Jul 20, 2020 – Jul 23, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v3 cover Add frequency / voltage scaling support for IPQ6018 SoC

IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same.

changes since V2:
- Rebased on top of linux-next 20200717 tag
- Addressed Rob's comment to drop the 'syscon' node in qcom,smd-rpm.yaml
- Picked up the Reviewed-by tag for qcom,smd-rpm-regulator.yaml
- Regulator patches part of V2 was picked up by Mark and it's available in linux-next tree

changes since V1:
- Moved YAML conversion to the last as per Mark's comments

Kathiravan T (4):
dt-bindings: soc: qcom: Add IPQ6018 compatible
soc: qcom: smd-rpm: Add IPQ6018 compatible
dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
dt-bindings: regulator: convert QCOM SMD-RPM regulator document to
YAML schema

 .../bindings/regulator/qcom,smd-rpm-regulator.txt  | 321 ---------------------
 .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt  |  64 ----
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml |  87 ++++++
 drivers/soc/qcom/smd-rpm.c                         |   1 +
 5 files changed, 194 insertions(+), 385 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

PATCH v3 1/4 dt-bindings: soc: qcom: Add IPQ6018 compatible

This patch adds the dt-binding for the rpm on the Qualcomm IPQ6018 platform.

---
 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +1 -0
index 005940f9..4c9c6fc 100644
@@ -20,6 +20,7 @@ resources.
 	Value type: <string>
 	Definition: must be one of:
 		    "qcom,rpm-apq8084"
+		    "qcom,rpm-ipq6018"
 		    "qcom,rpm-msm8916"
 		    "qcom,rpm-msm8936"
 		    "qcom,rpm-msm8974"
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
maintainer Acked-by on v3 1/4
#2 lore raw

Re: [PATCH V3 1/4] dt-bindings: soc: qcom: Add IPQ6018 compatible

Quoted 8 lines · Kathiravan T

This patch adds the dt-binding for the rpm on the Qualcomm IPQ6018 platform.

---
 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 1 +
 1 file changed, 1 insertion(+)
#3 lore raw

PATCH v3 2/4 soc: qcom: smd-rpm: Add IPQ6018 compatible

In reply to Kathiravan T

This patch adds a compatible for the rpm on the Qualcomm IPQ6018 platform.

---
 drivers/soc/qcom/smd-rpm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/soc/qcom/smd-rpm.c +1 -0
index 877b138..0ebd3ad 100644
@@ -230,6 +230,7 @@ static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
 
 static const struct of_device_id qcom_smd_rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-apq8084" },
+	{ .compatible = "qcom,rpm-ipq6018" },
 	{ .compatible = "qcom,rpm-msm8916" },
 	{ .compatible = "qcom,rpm-msm8936" },
 	{ .compatible = "qcom,rpm-msm8974" },
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
#4 lore raw

PATCH v3 3/4 dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema

In reply to Kathiravan T

Convert the qcom,smd-rpm.txt document to YAML schema

---
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt  | 65 ----------------
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 87 ++++++++++++++++++++++
 2 files changed, 87 insertions(+), 65 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt deleted +0 -65
deleted file mode 100644
index 4c9c6fc..0000000
@@ -1,65 +0,0 @@
-Qualcomm Resource Power Manager (RPM) over SMD
-
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
-
-The SMD information for the RPM edge should be filled out.  See qcom,smd.txt for
-the required edge properties.  All SMD related properties will reside within the
-RPM node itself.
-
-= SUBDEVICES
-
-The RPM exposes resources to its subnodes.  The rpm_requests node must be
-present and this subnode may contain children that designate regulator
-resources.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-apq8084"
-		    "qcom,rpm-ipq6018"
-		    "qcom,rpm-msm8916"
-		    "qcom,rpm-msm8936"
-		    "qcom,rpm-msm8974"
-		    "qcom,rpm-msm8976"
-		    "qcom,rpm-msm8994"
-		    "qcom,rpm-msm8998"
-		    "qcom,rpm-sdm660"
-		    "qcom,rpm-qcs404"
-
-- qcom,smd-channels:
-	Usage: required
-	Value type: <string>
-	Definition: must be "rpm_requests"
-
-Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
-for information on the regulator subnodes that can exist under the rpm_requests.
-
-Example:
-
-	soc {
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				...
-			};
-		};
-	};
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml new file +87 -0

87 lines not on this page · raw message

Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
maintainer Reviewed-by on v3 3/4
#5 lore raw

Re: [PATCH V3 3/4] dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema

Quoted 10 lines · Kathiravan T

Convert the qcom,smd-rpm.txt document to YAML schema

---
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt  | 65 ----------------
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 87 ++++++++++++++++++++++
 2 files changed, 87 insertions(+), 65 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
#6 lore raw

PATCH v3 4/4 dt-bindings: regulator: convert QCOM SMD-RPM regulator document to YAML schema

In reply to Kathiravan T

Convert qcom,smd-rpm-regulator.txt document to YAML schema

---
 .../bindings/regulator/qcom,smd-rpm-regulator.txt  | 321 ---------------------
 .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++
 2 files changed, 106 insertions(+), 321 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt deleted +0 -321
deleted file mode 100644
index 728c001..0000000
@@ -1,321 +0,0 @@
-QCOM SMD RPM REGULATOR
-
-The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
-Because SMD is used as the communication transport mechanism, the RPM resides as
-a subnode of the SMD.  As such, the SMD-RPM regulator requires that the SMD and
-RPM nodes be present.
-
-Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
-information pertaining to the SMD node.
-
-Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for
-information regarding the RPM node.
-
-== Regulator
-
-Regulator nodes are identified by their compatible:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-mp5496-regulators"
-		    "qcom,rpm-pm8841-regulators"
-		    "qcom,rpm-pm8916-regulators"
-		    "qcom,rpm-pm8941-regulators"
-		    "qcom,rpm-pm8950-regulators"
-		    "qcom,rpm-pm8994-regulators"
-		    "qcom,rpm-pm8998-regulators"
-		    "qcom,rpm-pma8084-regulators"
-		    "qcom,rpm-pmi8994-regulators"
-		    "qcom,rpm-pmi8998-regulators"
-		    "qcom,rpm-pms405-regulators"
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-	Usage: optional (pm8841 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l2_l3-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
-	Usage: optional (pm8916 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
-	Usage: optional (pm8950 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_l19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
-	Usage: optional (pm8941 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l5_l7-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l3_l11-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l14_l15-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l17_l29-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l20_l21-supply:
-- vdd_l20_l21-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l25-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l17_l29-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_lvs1_2-supply:
-	Usage: optional (pm8994 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_bst_byp-supply:
-	Usage: optional (pmi8994 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_s13-supply:
-- vdd_l1_l27-supply:
-- vdd_l20_l24-supply:
-- vdd_l26-supply:
-- vdd_l2_l8_l17-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l5-supply:
-- vdd_l6-supply:
-- vdd_l7_l12_l14_l15-supply:
-- vdd_l9-supply:
-- vdd_l10_l23_l25-supply:
-- vdd_l13_l19_l21-supply:
-- vdd_l16_l28-supply:
-- vdd_l18_l22-supply:
-- vdd_lvs1_lvs2-supply:
-	Usage: optional (pmi8998 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1_l11-supply:
-- vdd_l2_l3_l4_l27-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15_l26-supply:
-- vdd_l8-supply:
-- vdd_l9_l10_l13_l20_l23_l24-supply:
-- vdd_l16_l25-supply:
-- vdd_l17-supply:
-- vdd_l18-supply:
-- vdd_l19-supply:
-- vdd_l21-supply:
-- vdd_l22-supply:
-	Usage: optional (pma8084 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_bob-supply:
-	Usage: optional (pmi8998 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l3_l8-supply:
-- vdd_l9-supply:
-- vdd_l10_l11_l12_l13-supply:
-	Usage: optional (pms405 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the pmics below.
-
-pm8841:
-	s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18
-
-pm8941:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
-	lvs3, 5vs1, 5vs2
-
-pm8994:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pm8998:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4,
-	l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
-	l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
-
-pma8084:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
-
-pmi8994:
-	s1, s2, s3, boost-bypass
-
-pmi8998:
-	bob
-
-pms405:
-	s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12,
-	l13
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt.
-
-= EXAMPLE
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				pm8941-regulators {
-					compatible = "qcom,rpm-pm8941-regulators";
-					vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
-
-					pm8941_s3: s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pm8941_boost: s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					pm8941_l20: l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-					};
-				};
-			};
-		};
-	};
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml new file +106 -0

106 lines not on this page · raw message

Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
maintainer
#7 lore raw
In reply to Kathiravan T
Quoted 11 lines · Kathiravan T

IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same.

changes since V2:
- Rebased on top of linux-next 20200717 tag
- Addressed Rob's comment to drop the 'syscon' node in qcom,smd-rpm.yaml
- Picked up the Reviewed-by tag for qcom,smd-rpm-regulator.yaml
- Regulator patches part of V2 was picked up by Mark and it's available in linux-next tree

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: convert QCOM SMD-RPM regulator document to YAML schema

      commit: 175a1d84154d4077da437b873319bd094b266ab8

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

#8 lore raw
In reply to Kathiravan T
Quoted 4 lines · Kathiravan T

IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same.

Picked up patch 1-3 for v5.10

Thanks,
Bjorn

Quoted 30 lines

changes since V2:
- Rebased on top of linux-next 20200717 tag
- Addressed Rob's comment to drop the 'syscon' node in qcom,smd-rpm.yaml
- Picked up the Reviewed-by tag for qcom,smd-rpm-regulator.yaml
- Regulator patches part of V2 was picked up by Mark and it's available in linux-next tree

changes since V1:
- Moved YAML conversion to the last as per Mark's comments

Kathiravan T (4):
dt-bindings: soc: qcom: Add IPQ6018 compatible
soc: qcom: smd-rpm: Add IPQ6018 compatible
dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
dt-bindings: regulator: convert QCOM SMD-RPM regulator document to
YAML schema

 .../bindings/regulator/qcom,smd-rpm-regulator.txt  | 321 ---------------------
 .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt  |  64 ----
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml |  87 ++++++
 drivers/soc/qcom/smd-rpm.c                         |   1 +
 5 files changed, 194 insertions(+), 385 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation