Fix TI K3 cbass interconnect node names
Subsystems (2)
cover Fix TI K3 cbass interconnect node names
Hi Tero, Nishanth,
Following are couple of minor fixes that fix the node names for the interconnect bus nodes on K3 AM65x and J721E SoCs. These fix the following warnings seen with dtbs_check on the K3 dtbs.
'interconnect@100000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' 'interconnect@28380000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Lokesh has already used the correct name in his initial submission for J7200 SoCs.
regards
Suman
Suman Anna (2):
arm64: dts: ti: k3-am65: Fix interconnect node names
arm64: dts: ti: k3-j721e: Fix interconnect node names
arch/arm64/boot/dts/ti/k3-am65.dtsi | 6 +++--- arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-)
Signature · 1 line
2.26.0
PATCH 1/2 arm64: dts: ti: k3-am65: Fix interconnect node names
The various CBASS interconnect nodes on K3 AM65x SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".
--- arch/arm64/boot/dts/ti/k3-am65.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/ti/k3-am65.dtsi +3 -3
@@ -61,7 +61,7 @@ pmu: pmu { interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - cbass_main: interconnect@100000 { + cbass_main: bus@100000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -88,7 +88,7 @@ cbass_main: interconnect@100000 { <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; - cbass_mcu: interconnect@28380000 { + cbass_mcu: bus@28380000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -106,7 +106,7 @@ cbass_mcu: interconnect@28380000 { <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ - cbass_wakeup: interconnect@42040000 { + cbass_wakeup: bus@42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
Signature · 1 line
2.26.0
Re: [PATCH 1/2] arm64: dts: ti: k3-am65: Fix interconnect node names
Quoted 6 lines · Suman Anna
The various CBASS interconnect nodes on K3 AM65x SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".
Signed-off-by Suman Anna <[email protected]>
Thanks and regards,
Lokesh
PATCH 2/2 arm64: dts: ti: k3-j721e: Fix interconnect node names
In reply to Suman AnnaThe various CBASS interconnect nodes on K3 J721E SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".
--- arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/ti/k3-j721e.dtsi +2 -2
@@ -120,7 +120,7 @@ pmu: pmu { interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - cbass_main: interconnect@100000 { + cbass_main: bus@100000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -155,7 +155,7 @@ cbass_main: interconnect@100000 { <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; - cbass_mcu_wakeup: interconnect@28380000 { + cbass_mcu_wakeup: bus@28380000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
Signature · 1 line
2.26.0
Re: [PATCH 2/2] arm64: dts: ti: k3-j721e: Fix interconnect node names
Quoted 6 lines · Suman Anna
The various CBASS interconnect nodes on K3 J721E SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".
Signed-off-by Suman Anna <[email protected]>
Thanks and regards,
Lokesh
Nishanth Menon
maintainerQuoted 11 lines · Suman Anna
Hi Tero, Nishanth,
Following are couple of minor fixes that fix the node names for the interconnect bus nodes on K3 AM65x and J721E SoCs. These fix the following warnings seen with
dtbs_checkon the K3 dtbs.'interconnect@100000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' 'interconnect@28380000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Lokesh has already used the correct name in his initial submission for J7200 SoCs.
Thank you. I have staged in the staging branch, once rc3 is available, I will apply it there and you should be able to see this in -next tree.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D