configs/raspberrypi*: bump kernel version to 5.4.x
cover configs/raspberrypi*: bump kernel version to 5.4.x
Bump raspberry pi configs/rpi-firmware/rpi-userland to kernel vesion 5.4.x.
Testes on RPi4 (32-bit/64-bit) with the following defconfigs and with both vc4/v3d device tree overlays ('dtoverlay=vc4-fkms-v3d' and 'dtoverlay=vc4-kms-v3d-pi4').
For Qt graphics output QT_QPA_EGLFS_ALWAYS_SET_MODE=1 ([1]) or QT_QPA_EGLFS_KMS_ATOMIC=1 ([2]) is needed, otherwise it will fail with:
Could not queue DRM page flip on screen HDMI1 (Invalid argument)
Regards,
Peter
- RPi4 32-bit:
BR2_arm=y
BR2_cortex_a72=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_ENABLE_DEBUG=y
BR2_OPTIMIZE_3=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_SYSTEM_DHCP="eth0"
BR2_GENERATE_LOCALE="en_US"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2711-rpi-4-b"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_DEJAVU=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_KMSRO=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_V3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_EXAMPLES=y
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
BR2_PACKAGE_QT5BASE_EGLFS=y
BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs"
BR2_PACKAGE_QT5BASE_FONTCONFIG=y
BR2_PACKAGE_QT5BASE_HARFBUZZ=y
BR2_PACKAGE_QT5BASE_GIF=y
BR2_PACKAGE_QT5BASE_JPEG=y
BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5GRAPHICALEFFECTS=y
BR2_PACKAGE_QT5IMAGEFORMATS=y
BR2_PACKAGE_QT5QUICKCONTROLS=y
BR2_PACKAGE_QT5QUICKCONTROLS2=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
BR2_PACKAGE_LIBINPUT=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="256M"
BR2_TARGET_ROOTFS_TAR_GZIP=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
- RPi4 64-bit:
BR2_aarch64=y
BR2_cortex_a72=y
BR2_ARM_FPU_VFPV4=y
BR2_ENABLE_DEBUG=y
BR2_OPTIMIZE_3=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_SYSTEM_DHCP="eth0"
BR2_GENERATE_LOCALE="en_US"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --aarch64"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_DEJAVU=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_KMSRO=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_V3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_EXAMPLES=y
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
BR2_PACKAGE_QT5BASE_EGLFS=y
BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs"
BR2_PACKAGE_QT5BASE_FONTCONFIG=y
BR2_PACKAGE_QT5BASE_HARFBUZZ=y
BR2_PACKAGE_QT5BASE_GIF=y
BR2_PACKAGE_QT5BASE_JPEG=y
BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5GRAPHICALEFFECTS=y
BR2_PACKAGE_QT5IMAGEFORMATS=y
BR2_PACKAGE_QT5QUICKCONTROLS=y
BR2_PACKAGE_QT5QUICKCONTROLS2=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
BR2_PACKAGE_LIBINPUT=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="256M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
[1] https://www.raspberrypi.org/forums/viewtopic.php?t=252614
[2] https://bugreports.qt.io/browse/QTBUG-72538
Peter Seiderer (3):
package/rpi-firmware: bump version to 542aceb package/rpi-userland: bump version to 188d3bf configs/raspberrypi*: bump kernel version to 1c64f4b (5.4.51)
configs/raspberrypi0_defconfig | 6 +++--- configs/raspberrypi0w_defconfig | 6 +++--- configs/raspberrypi2_defconfig | 6 +++--- configs/raspberrypi3_64_defconfig | 6 +++--- configs/raspberrypi3_defconfig | 6 +++--- configs/raspberrypi3_qt5we_defconfig | 6 +++--- configs/raspberrypi4_64_defconfig | 6 +++--- configs/raspberrypi4_defconfig | 6 +++--- configs/raspberrypi_defconfig | 6 +++--- package/rpi-firmware/rpi-firmware.hash | 2 +- package/rpi-firmware/rpi-firmware.mk | 2 +- package/rpi-userland/rpi-userland.hash | 2 +- package/rpi-userland/rpi-userland.mk | 2 +- 13 files changed, 31 insertions(+), 31 deletions(-)
Signature · 1 line
2.27.0
PATCH 1/3 package/rpi-firmware: bump version to 542aceb
--- package/rpi-firmware/rpi-firmware.hash | 2 +- package/rpi-firmware/rpi-firmware.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
package/rpi-firmware/rpi-firmware.hash +1 -1
@@ -1,3 +1,3 @@ # Locally computed -sha256 0596505f529677906fed30e6c3c1d2387a5d287f668a719484e2f9d8a3059176 rpi-firmware-5574077183389cd4c65077ba18b59144ed6ccd6d.tar.gz +sha256 bad3eedb256631bdce1e7d3a0ac59fdd38923a68579089a6b64029c5ff7d68f4 rpi-firmware-542aceb30364db3ce87d532ea90451f46bbb84e9.tar.gz sha256 c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b boot/LICENCE.broadcom
package/rpi-firmware/rpi-firmware.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -RPI_FIRMWARE_VERSION = 5574077183389cd4c65077ba18b59144ed6ccd6d +RPI_FIRMWARE_VERSION = 542aceb30364db3ce87d532ea90451f46bbb84e9 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION)) RPI_FIRMWARE_LICENSE = BSD-3-Clause RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
Signature · 1 line
2.27.0
PATCH 1/3 package/rpi-firmware: bump version to 542aceb
Quoted 5 lines · On Tue, 21 Jul 2020 21:05:47 +0200 Peter Seiderer <[email protected]> wrote:
Signed-off-by Peter Seiderer <[email protected]>--- package/rpi-firmware/rpi-firmware.hash | 2 +- package/rpi-firmware/rpi-firmware.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
Series applied. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 2/3 package/rpi-userland: bump version to 188d3bf
In reply to Peter Seiderer--- package/rpi-userland/rpi-userland.hash | 2 +- package/rpi-userland/rpi-userland.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
package/rpi-userland/rpi-userland.hash +1 -1
@@ -1,3 +1,3 @@ # Locally computed -sha256 f81fe28c636178645fb406cc87f543efa828ca896df856536f7b1b4ab54dfe0e rpi-userland-6fb59736b1ae80fc62cddfe3309c800f72e1c07e.tar.gz +sha256 7c58d6b4cdf65acef0ce1f441606df87e25745f78d74e11930383d03100aff4b rpi-userland-188d3bfe4a0ac36b119a2cee35a6be8d0c68e09e.tar.gz sha256 bee6f1249175683d8610651706e1aa7dffcbfd3f9c4c05bc1e5ab34f313c2db5 LICENCE
package/rpi-userland/rpi-userland.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -RPI_USERLAND_VERSION = 6fb59736b1ae80fc62cddfe3309c800f72e1c07e +RPI_USERLAND_VERSION = 188d3bfe4a0ac36b119a2cee35a6be8d0c68e09e RPI_USERLAND_SITE = $(call github,raspberrypi,userland,$(RPI_USERLAND_VERSION)) RPI_USERLAND_LICENSE = BSD-3-Clause RPI_USERLAND_LICENSE_FILES = LICENCE
Signature · 1 line
2.27.0
PATCH 3/3 configs/raspberrypi*: bump kernel version to 1c64f4b (5.4.51)
In reply to Peter SeidererNow based on 5.4.51 (from 4.19.113)
--- configs/raspberrypi0_defconfig | 6 +++--- configs/raspberrypi0w_defconfig | 6 +++--- configs/raspberrypi2_defconfig | 6 +++--- configs/raspberrypi3_64_defconfig | 6 +++--- configs/raspberrypi3_defconfig | 6 +++--- configs/raspberrypi3_qt5we_defconfig | 6 +++--- configs/raspberrypi4_64_defconfig | 6 +++--- configs/raspberrypi4_defconfig | 6 +++--- configs/raspberrypi_defconfig | 6 +++--- 9 files changed, 27 insertions(+), 27 deletions(-)
configs/raspberrypi0_defconfig +3 -3
@@ -2,14 +2,14 @@ BR2_arm=y BR2_arm1176jzf_s=y BR2_ARM_EABIHF=y -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" # Build the DTBs for A/B from the kernel sources: the zero is the same
configs/raspberrypi0w_defconfig +3 -3
@@ -2,14 +2,14 @@ BR2_arm=y BR2_arm1176jzf_s=y BR2_ARM_EABIHF=y -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"
configs/raspberrypi2_defconfig +3 -3
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" # Build the DTB from the kernel sources
configs/raspberrypi3_64_defconfig +3 -3
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3" # Build the DTB from the kernel sources
configs/raspberrypi3_defconfig +3 -3
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" # Build the DTB from the kernel sources
configs/raspberrypi3_qt5we_defconfig +3 -3
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" # Build the DTB from the kernel sources
configs/raspberrypi4_64_defconfig +3 -3
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" # Build the DTB from the kernel sources
configs/raspberrypi4_defconfig +3 -3
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" # Build the DTB from the kernel sources
configs/raspberrypi_defconfig +3 -3
@@ -4,14 +4,14 @@ BR2_ARM_EABIHF=y BR2_SYSTEM_DHCP="eth0" -# Linux headers same as kernel, a 4.19 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,676fd5a6f2a9b365da0e0371ef11acbb74cb69d5)/linux-676fd5a6f2a9b365da0e0371ef11acbb74cb69d5.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,1c64f4bc22811d2d371b271daa3fb27895a8abdd)/linux-1c64f4bc22811d2d371b271daa3fb27895a8abdd.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" # Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
Signature · 1 line
2.27.0