Skip to contentSkip to conversation

block: improve error reporting for unsupported O_DIRECT

PATCH Superseded Daniel P. Berrangé 4 participants 15 messages Jul 24, 2020 – Jul 27, 2020

Subsystems (2)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v3 cover block: improve error reporting for unsupported O_DIRECT

v1: https://lists.gnu.org/archive/html/qemu-devel/2020-07/msg00269.html
v2: https://lists.gnu.org/archive/html/qemu-devel/2020-07/msg00589.html

See patch commit messages for rationale

Ideally we would convert other callers of qemu_open to use qemu_open_err, and eventually remove qemu_open, renaming qemu_open_err back to qemu_open. Given soft freeze is just days away though, I'm hoping this series is simple enough to get into this release, leaving bigger cleanup for later.

Improved in v3:

- Re-arrange the patches series, so that the conversion to Error takes place first, then the improve O_DIRECT reporting
- Rename existing method to qemu_open_old
- Use a pair of new methods qemu_open + qemu_create to improve arg checking

Improved in v2:

- Mention that qemu_open_err is preferred over qemu_open
- Get rid of obsolete error_report call
- Simplify O_DIRECT handling
- Fixup iotests for changed error message text

Daniel P. Berrangé (4):
util: rename qemu_open() to qemu_open_old()
util: introduce qemu_open and qemu_create with error reporting
util: give a specific error message when O_DIRECT doesn't work
block: switch to use qemu_open/qemu_create for improved errors

 accel/kvm/kvm-all.c            |  2 +-
 backends/rng-random.c          |  2 +-
 backends/tpm/tpm_passthrough.c |  8 +--
 block/file-posix.c             | 16 +++---
 block/file-win32.c             |  5 +-
 block/vvfat.c                  |  5 +-
 chardev/char-fd.c              |  2 +-
 chardev/char-pipe.c            |  6 +--
 chardev/char.c                 |  2 +-
 dump/dump.c                    |  2 +-
 hw/s390x/s390-skeys.c          |  2 +-
 hw/usb/host-libusb.c           |  2 +-
 hw/vfio/common.c               |  4 +-
 include/qemu/osdep.h           |  8 ++-
 io/channel-file.c              |  2 +-
 net/vhost-vdpa.c               |  2 +-
 os-posix.c                     |  2 +-
 qga/channel-posix.c            |  4 +-
 qga/commands-posix.c           |  6 +--
 target/arm/kvm.c               |  2 +-
 tests/qemu-iotests/051.out     |  4 +-
 tests/qemu-iotests/051.pc.out  |  4 +-
 tests/qemu-iotests/061.out     |  2 +-
 tests/qemu-iotests/069.out     |  2 +-
 tests/qemu-iotests/082.out     |  4 +-
 tests/qemu-iotests/111.out     |  2 +-
 tests/qemu-iotests/226.out     |  6 +--
 tests/qemu-iotests/232.out     | 12 ++---
 tests/qemu-iotests/244.out     |  6 +--
 ui/console.c                   |  2 +-
 util/osdep.c                   | 91 +++++++++++++++++++++++++++++-----
 util/oslib-posix.c             |  2 +-
 32 files changed, 144 insertions(+), 77 deletions(-)
Signature · 1 line
2.26.2
#1 lore raw

PATCH v3 1/4 util: rename qemu_open() to qemu_open_old()

We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl.

---
 accel/kvm/kvm-all.c            |  2 +-
 backends/rng-random.c          |  2 +-
 backends/tpm/tpm_passthrough.c |  8 ++++----
 block/file-posix.c             | 14 +++++++-------
 block/file-win32.c             |  5 +++--
 block/vvfat.c                  |  5 +++--
 chardev/char-fd.c              |  2 +-
 chardev/char-pipe.c            |  6 +++---
 chardev/char.c                 |  2 +-
 dump/dump.c                    |  2 +-
 hw/s390x/s390-skeys.c          |  2 +-
 hw/usb/host-libusb.c           |  2 +-
 hw/vfio/common.c               |  4 ++--
 include/qemu/osdep.h           |  2 +-
 io/channel-file.c              |  2 +-
 net/vhost-vdpa.c               |  2 +-
 os-posix.c                     |  2 +-
 qga/channel-posix.c            |  4 ++--
 qga/commands-posix.c           |  6 +++---
 target/arm/kvm.c               |  2 +-
 ui/console.c                   |  2 +-
 util/osdep.c                   |  2 +-
 util/oslib-posix.c             |  2 +-
 23 files changed, 42 insertions(+), 40 deletions(-)
accel/kvm/kvm-all.c +1 -1
index 63ef6af9a1..ad8b315b35 100644
@@ -2013,7 +2013,7 @@ static int kvm_init(MachineState *ms)
 #endif
     QLIST_INIT(&s->kvm_parked_vcpus);
     s->vmfd = -1;
-    s->fd = qemu_open("/dev/kvm", O_RDWR);
+    s->fd = qemu_open_old("/dev/kvm", O_RDWR);
     if (s->fd == -1) {
         fprintf(stderr, "Could not access KVM kernel module: %m\n");
         ret = -errno;
backends/rng-random.c +1 -1
index 32998d8ee7..245b12ab24 100644
@@ -75,7 +75,7 @@ static void rng_random_opened(RngBackend *b, Error **errp)
         error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
                    "filename", "a valid filename");
     } else {
-        s->fd = qemu_open(s->filename, O_RDONLY | O_NONBLOCK);
+        s->fd = qemu_open_old(s->filename, O_RDONLY | O_NONBLOCK);
         if (s->fd == -1) {
             error_setg_file_open(errp, errno, s->filename);
         }
backends/tpm/tpm_passthrough.c +4 -4
index 7403807ec4..81e2d8f531 100644
@@ -217,7 +217,7 @@ static int tpm_passthrough_open_sysfs_cancel(TPMPassthruState *tpm_pt)
     char path[PATH_MAX];
 
     if (tpm_pt->options->cancel_path) {
-        fd = qemu_open(tpm_pt->options->cancel_path, O_WRONLY);
+        fd = qemu_open_old(tpm_pt->options->cancel_path, O_WRONLY);
         if (fd < 0) {
             error_report("tpm_passthrough: Could not open TPM cancel path: %s",
                          strerror(errno));
@@ -235,11 +235,11 @@ static int tpm_passthrough_open_sysfs_cancel(TPMPassthruState *tpm_pt)
     dev++;
     if (snprintf(path, sizeof(path), "/sys/class/tpm/%s/device/cancel",
                  dev) < sizeof(path)) {
-        fd = qemu_open(path, O_WRONLY);
+        fd = qemu_open_old(path, O_WRONLY);
         if (fd < 0) {
             if (snprintf(path, sizeof(path), "/sys/class/misc/%s/device/cancel",
                          dev) < sizeof(path)) {
-                fd = qemu_open(path, O_WRONLY);
+                fd = qemu_open_old(path, O_WRONLY);
             }
         }
     }
@@ -271,7 +271,7 @@ tpm_passthrough_handle_device_opts(TPMPassthruState *tpm_pt, QemuOpts *opts)
     }
 
     tpm_pt->tpm_dev = value ? value : TPM_PASSTHROUGH_DEFAULT_DEVICE;
-    tpm_pt->tpm_fd = qemu_open(tpm_pt->tpm_dev, O_RDWR);
+    tpm_pt->tpm_fd = qemu_open_old(tpm_pt->tpm_dev, O_RDWR);
     if (tpm_pt->tpm_fd < 0) {
         error_report("Cannot access TPM device using '%s': %s",
                      tpm_pt->tpm_dev, strerror(errno));
block/file-posix.c +7 -7
index 9a00d4190a..bac2566f10 100644
@@ -630,7 +630,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
     raw_parse_flags(bdrv_flags, &s->open_flags, false);
 
     s->fd = -1;
-    fd = qemu_open(filename, s->open_flags, 0644);
+    fd = qemu_open_old(filename, s->open_flags, 0644);
     ret = fd < 0 ? -errno : 0;
 
     if (ret < 0) {
@@ -1032,13 +1032,13 @@ static int raw_reconfigure_getfd(BlockDriverState *bs, int flags,
         }
     }
 
-    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
+    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open_old() */
     if (fd == -1) {
         const char *normalized_filename = bs->filename;
         ret = raw_normalize_devicepath(&normalized_filename, errp);
         if (ret >= 0) {
             assert(!(*open_flags & O_CREAT));
-            fd = qemu_open(normalized_filename, *open_flags);
+            fd = qemu_open_old(normalized_filename, *open_flags);
             if (fd == -1) {
                 error_setg_errno(errp, errno, "Could not reopen file");
                 return -1;
@@ -2411,7 +2411,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
     }
 
     /* Create file */
-    fd = qemu_open(file_opts->filename, O_RDWR | O_CREAT | O_BINARY, 0644);
+    fd = qemu_open_old(file_opts->filename, O_RDWR | O_CREAT | O_BINARY, 0644);
     if (fd < 0) {
         result = -errno;
         error_setg_errno(errp, -result, "Could not create file");
@@ -3335,7 +3335,7 @@ static bool setup_cdrom(char *bsd_path, Error **errp)
     for (index = 0; index < num_of_test_partitions; index++) {
         snprintf(test_partition, sizeof(test_partition), "%ss%d", bsd_path,
                  index);
-        fd = qemu_open(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE);
+        fd = qemu_open_old(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE);
         if (fd >= 0) {
             partition_found = true;
             qemu_close(fd);
@@ -3653,7 +3653,7 @@ static int cdrom_probe_device(const char *filename)
     int prio = 0;
     struct stat st;
 
-    fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
+    fd = qemu_open_old(filename, O_RDONLY | O_NONBLOCK);
     if (fd < 0) {
         goto out;
     }
@@ -3787,7 +3787,7 @@ static int cdrom_reopen(BlockDriverState *bs)
      */
     if (s->fd >= 0)
         qemu_close(s->fd);
-    fd = qemu_open(bs->filename, s->open_flags, 0644);
+    fd = qemu_open_old(bs->filename, s->open_flags, 0644);
     if (fd < 0) {
         s->fd = -1;
         return -EIO;
block/file-win32.c +3 -2
index ab69bd811a..8c1845830e 100644
@@ -576,8 +576,9 @@ static int raw_co_create(BlockdevCreateOptions *options, Error **errp)
         return -EINVAL;
     }
 
-    fd = qemu_open(file_opts->filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
-                   0644);
+    fd = qemu_open_old(file_opts->filename,
+                       O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
+                       0644);
     if (fd < 0) {
         error_setg_errno(errp, errno, "Could not create file");
         return -EIO;
block/vvfat.c +3 -2
index 36b53c8757..5abb90e7c7 100644
@@ -1352,7 +1352,8 @@ static int open_file(BDRVVVFATState* s,mapping_t* mapping)
     if(!s->current_mapping ||
             strcmp(s->current_mapping->path,mapping->path)) {
         /* open file */
-        int fd = qemu_open(mapping->path, O_RDONLY | O_BINARY | O_LARGEFILE);
+        int fd = qemu_open_old(mapping->path,
+                               O_RDONLY | O_BINARY | O_LARGEFILE);
         if(fd<0)
             return -1;
         vvfat_close_current_file(s);
@@ -2513,7 +2514,7 @@ static int commit_one_file(BDRVVVFATState* s,
     for (i = s->cluster_size; i < offset; i += s->cluster_size)
         c = modified_fat_get(s, c);
 
-    fd = qemu_open(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666);
+    fd = qemu_open_old(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666);
     if (fd < 0) {
         fprintf(stderr, "Could not open %s... (%s, %d)\n", mapping->path,
                 strerror(errno), errno);
chardev/char-fd.c +1 -1
index c2d8101106..1cd62f2779 100644
@@ -119,7 +119,7 @@ int qmp_chardev_open_file_source(char *src, int flags, Error **errp)
 {
     int fd = -1;
 
-    TFR(fd = qemu_open(src, flags, 0666));
+    TFR(fd = qemu_open_old(src, flags, 0666));
     if (fd == -1) {
         error_setg_file_open(errp, errno, src);
     }
chardev/char-pipe.c +3 -3
index fd12c9e63b..7eca5d9a56 100644
@@ -132,8 +132,8 @@ static void qemu_chr_open_pipe(Chardev *chr,
 
     filename_in = g_strdup_printf("%s.in", filename);
     filename_out = g_strdup_printf("%s.out", filename);
-    TFR(fd_in = qemu_open(filename_in, O_RDWR | O_BINARY));
-    TFR(fd_out = qemu_open(filename_out, O_RDWR | O_BINARY));
+    TFR(fd_in = qemu_open_old(filename_in, O_RDWR | O_BINARY));
+    TFR(fd_out = qemu_open_old(filename_out, O_RDWR | O_BINARY));
     g_free(filename_in);
     g_free(filename_out);
     if (fd_in < 0 || fd_out < 0) {
@@ -143,7 +143,7 @@ static void qemu_chr_open_pipe(Chardev *chr,
         if (fd_out >= 0) {
             close(fd_out);
         }
-        TFR(fd_in = fd_out = qemu_open(filename, O_RDWR | O_BINARY));
+        TFR(fd_in = fd_out = qemu_open_old(filename, O_RDWR | O_BINARY));
         if (fd_in < 0) {
             error_setg_file_open(errp, errno, filename);
             return;
chardev/char.c +1 -1
index 77e7ec814f..6b85099c03 100644
@@ -235,7 +235,7 @@ static void qemu_char_open(Chardev *chr, ChardevBackend *backend,
         } else {
             flags |= O_TRUNC;
         }
-        chr->logfd = qemu_open(common->logfile, flags, 0666);
+        chr->logfd = qemu_open_old(common->logfile, flags, 0666);
         if (chr->logfd < 0) {
             error_setg_errno(errp, errno,
                              "Unable to open logfile %s",
dump/dump.c +1 -1
index 383bc7876b..13fda440a4 100644
@@ -1994,7 +1994,7 @@ void qmp_dump_guest_memory(bool paging, const char *file,
 #endif
 
     if  (strstart(file, "file:", &p)) {
-        fd = qemu_open(p, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, S_IRUSR);
+        fd = qemu_open_old(p, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, S_IRUSR);
         if (fd < 0) {
             error_setg_file_open(errp, errno, p);
             return;
hw/s390x/s390-skeys.c +1 -1
index db2f49cb27..5cc559fe4c 100644
@@ -125,7 +125,7 @@ void qmp_dump_skeys(const char *filename, Error **errp)
         return;
     }
 
-    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0600);
+    fd = qemu_open_old(filename, O_WRONLY | O_CREAT | O_TRUNC, 0600);
     if (fd < 0) {
         error_setg_file_open(errp, errno, filename);
         return;
hw/usb/host-libusb.c +1 -1
index c474551d84..14dd4de684 100644
@@ -1111,7 +1111,7 @@ static void usb_host_realize(USBDevice *udev, Error **errp)
     if (s->hostdevice) {
         int fd;
         s->needs_autoscan = false;
-        fd = qemu_open(s->hostdevice, O_RDWR);
+        fd = qemu_open_old(s->hostdevice, O_RDWR);
         if (fd < 0) {
             error_setg_errno(errp, errno, "failed to open %s", s->hostdevice);
             return;
hw/vfio/common.c +2 -2
index 33357140b8..13471ae294 100644
@@ -1254,7 +1254,7 @@ static int vfio_connect_container(VFIOGroup *group, AddressSpace *as,
         }
     }
 
-    fd = qemu_open("/dev/vfio/vfio", O_RDWR);
+    fd = qemu_open_old("/dev/vfio/vfio", O_RDWR);
     if (fd < 0) {
         error_setg_errno(errp, errno, "failed to open /dev/vfio/vfio");
         ret = -errno;
@@ -1479,7 +1479,7 @@ VFIOGroup *vfio_get_group(int groupid, AddressSpace *as, Error **errp)
     group = g_malloc0(sizeof(*group));
 
     snprintf(path, sizeof(path), "/dev/vfio/%d", groupid);
-    group->fd = qemu_open(path, O_RDWR);
+    group->fd = qemu_open_old(path, O_RDWR);
     if (group->fd < 0) {
         error_setg_errno(errp, errno, "failed to open %s", path);
         goto free_group_exit;
include/qemu/osdep.h +1 -1
index 45c217aa28..3a16e58932 100644
@@ -494,7 +494,7 @@ int qemu_madvise(void *addr, size_t len, int advice);
 int qemu_mprotect_rwx(void *addr, size_t size);
 int qemu_mprotect_none(void *addr, size_t size);
 
-int qemu_open(const char *name, int flags, ...);
+int qemu_open_old(const char *name, int flags, ...);
 int qemu_close(int fd);
 int qemu_unlink(const char *name);
 #ifndef _WIN32
io/channel-file.c +1 -1
index dac21f6012..2ed3b75e8b 100644
@@ -51,7 +51,7 @@ qio_channel_file_new_path(const char *path,
 
     ioc = QIO_CHANNEL_FILE(object_new(TYPE_QIO_CHANNEL_FILE));
 
-    ioc->fd = qemu_open(path, flags, mode);
+    ioc->fd = qemu_open_old(path, flags, mode);
     if (ioc->fd < 0) {
         object_unref(OBJECT(ioc));
         error_setg_errno(errp, errno,
net/vhost-vdpa.c +1 -1
index bc0e0d2d35..e2b3ba85bf 100644
@@ -184,7 +184,7 @@ static int net_vhost_vdpa_init(NetClientState *peer, const char *device,
     snprintf(nc->info_str, sizeof(nc->info_str), TYPE_VHOST_VDPA);
     nc->queue_index = 0;
     s = DO_UPCAST(VhostVDPAState, nc, nc);
-    vdpa_device_fd = qemu_open(vhostdev, O_RDWR);
+    vdpa_device_fd = qemu_open_old(vhostdev, O_RDWR);
     if (vdpa_device_fd == -1) {
         return -errno;
     }
os-posix.c +1 -1
index 3572db3f44..1b927c7c04 100644
@@ -297,7 +297,7 @@ void os_setup_post(void)
             error_report("not able to chdir to /: %s", strerror(errno));
             exit(1);
         }
-        TFR(fd = qemu_open("/dev/null", O_RDWR));
+        TFR(fd = qemu_open_old("/dev/null", O_RDWR));
         if (fd == -1) {
             exit(1);
         }
qga/channel-posix.c +2 -2
index 8fc205ad21..0373975360 100644
@@ -127,7 +127,7 @@ static gboolean ga_channel_open(GAChannel *c, const gchar *path,
     switch (c->method) {
     case GA_CHANNEL_VIRTIO_SERIAL: {
         assert(fd < 0);
-        fd = qemu_open(path, O_RDWR | O_NONBLOCK
+        fd = qemu_open_old(path, O_RDWR | O_NONBLOCK
 #ifndef CONFIG_SOLARIS
                            | O_ASYNC
 #endif
@@ -157,7 +157,7 @@ static gboolean ga_channel_open(GAChannel *c, const gchar *path,
         struct termios tio;
 
         assert(fd < 0);
-        fd = qemu_open(path, O_RDWR | O_NOCTTY | O_NONBLOCK);
+        fd = qemu_open_old(path, O_RDWR | O_NOCTTY | O_NONBLOCK);
         if (fd == -1) {
             g_critical("error opening channel: %s", strerror(errno));
             return false;
qga/commands-posix.c +3 -3
index 1a62a3a70d..ffe0d24bf3 100644
@@ -1304,7 +1304,7 @@ int64_t qmp_guest_fsfreeze_freeze_list(bool has_mountpoints,
             }
         }
 
-        fd = qemu_open(mount->dirname, O_RDONLY);
+        fd = qemu_open_old(mount->dirname, O_RDONLY);
         if (fd == -1) {
             error_setg_errno(errp, errno, "failed to open %s", mount->dirname);
             goto error;
@@ -1371,7 +1371,7 @@ int64_t qmp_guest_fsfreeze_thaw(Error **errp)
 
     QTAILQ_FOREACH(mount, &mounts, next) {
         logged = false;
-        fd = qemu_open(mount->dirname, O_RDONLY);
+        fd = qemu_open_old(mount->dirname, O_RDONLY);
         if (fd == -1) {
             continue;
         }
@@ -1461,7 +1461,7 @@ qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp)
         list->next = response->paths;
         response->paths = list;
 
-        fd = qemu_open(mount->dirname, O_RDONLY);
+        fd = qemu_open_old(mount->dirname, O_RDONLY);
         if (fd == -1) {
             result->error = g_strdup_printf("failed to open: %s",
                                             strerror(errno));
target/arm/kvm.c +1 -1
index 8bb7318378..f944bfa0dc 100644
@@ -71,7 +71,7 @@ bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,
 {
     int ret = 0, kvmfd = -1, vmfd = -1, cpufd = -1;
 
-    kvmfd = qemu_open("/dev/kvm", O_RDWR);
+    kvmfd = qemu_open_old("/dev/kvm", O_RDWR);
     if (kvmfd < 0) {
         goto err;
     }
ui/console.c +1 -1
index 0579be792f..02eca16bd7 100644
@@ -372,7 +372,7 @@ void qmp_screendump(const char *filename, bool has_device, const char *device,
         return;
     }
 
-    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0666);
+    fd = qemu_open_old(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0666);
     if (fd == -1) {
         error_setg(errp, "failed to open file '%s': %s", filename,
                    strerror(errno));
util/osdep.c +1 -1
index 4829c07ff6..9df1b6adec 100644
@@ -282,7 +282,7 @@ int qemu_lock_fd_test(int fd, int64_t start, int64_t len, bool exclusive)
 /*
  * Opens a file with FD_CLOEXEC set
  */
-int qemu_open(const char *name, int flags, ...)
+int qemu_open_old(const char *name, int flags, ...)
 {
     int ret;
     int mode = 0;
util/oslib-posix.c +1 -1
index d923674624..4706c2f744 100644
@@ -125,7 +125,7 @@ bool qemu_write_pidfile(const char *path, Error **errp)
             .l_len = 0,
         };
 
-        fd = qemu_open(path, O_CREAT | O_WRONLY, S_IRUSR | S_IWUSR);
+        fd = qemu_open_old(path, O_CREAT | O_WRONLY, S_IRUSR | S_IWUSR);
         if (fd == -1) {
             error_setg_errno(errp, errno, "Cannot open pid file");
             return false;
Signature · 1 line
2.26.2
Reviewed-by on v3 1/4
#2 lore raw

Re: [PATCH v3 1/4] util: rename qemu_open() to qemu_open_old()

Quoted 8 lines · Daniel P. Berrangé

We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl.

---

  23 files changed, 42 insertions(+), 40 deletions(-)

Mechanical, and a quick grep shows you got them all.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org
Reviewed-by on v3 1/4
#3 lore raw

Re: [PATCH v3 1/4] util: rename qemu_open() to qemu_open_old()

In reply to Daniel P. Berrangé
Quoted 22 lines · Daniel P. Berrangé

We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl.

---
 accel/kvm/kvm-all.c            |  2 +-
 backends/rng-random.c          |  2 +-
 backends/tpm/tpm_passthrough.c |  8 ++++----
 block/file-posix.c             | 14 +++++++-------
 block/file-win32.c             |  5 +++--
 block/vvfat.c                  |  5 +++--
 chardev/char-fd.c              |  2 +-
 chardev/char-pipe.c            |  6 +++---
 chardev/char.c                 |  2 +-
 dump/dump.c                    |  2 +-
 hw/s390x/s390-skeys.c          |  2 +-
 hw/usb/host-libusb.c           |  2 +-
 hw/vfio/common.c               |  4 ++--
 include/qemu/osdep.h           |  2 +-
 io/channel-file.c              |  2 +-
 net/vhost-vdpa.c               |  2 +-
Quoted 8 lines
 os-posix.c                     |  2 +-
 qga/channel-posix.c            |  4 ++--
 qga/commands-posix.c           |  6 +++---
 target/arm/kvm.c               |  2 +-
 ui/console.c                   |  2 +-
 util/osdep.c                   |  2 +-
 util/oslib-posix.c             |  2 +-
 23 files changed, 42 insertions(+), 40 deletions(-)
#4 lore raw

PATCH v3 2/4 util: introduce qemu_open and qemu_create with error reporting

In reply to Daniel P. Berrangé

This introduces two new helper metohds

int qemu_open(const char *name, int flags, Error **errp); int qemu_create(const char *name, int flags, mode_t mode, Error **errp);

Note that with this design we no longer require or even accept the O_CREAT flag. Avoiding overloading the two distinct operations means we can avoid variable arguments which would prevent 'errp' from being the last argument. It also gives us a guarantee that the 'mode' is given when creating files, avoiding a latent security bug.

---
 include/qemu/osdep.h |  6 ++++
 util/osdep.c         | 78 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 71 insertions(+), 13 deletions(-)
include/qemu/osdep.h +6 -0
index 3a16e58932..ca24ebe211 100644
@@ -494,7 +494,13 @@ int qemu_madvise(void *addr, size_t len, int advice);
 int qemu_mprotect_rwx(void *addr, size_t size);
 int qemu_mprotect_none(void *addr, size_t size);
 
+/*
+ * Don't introduce new usage of this function, prefer the following
+ * qemu_open/qemu_create that take a "Error **errp"
+ */
 int qemu_open_old(const char *name, int flags, ...);
+int qemu_open(const char *name, int flags, Error **errp);
+int qemu_create(const char *name, int flags, mode_t mode, Error **errp);
 int qemu_close(int fd);
 int qemu_unlink(const char *name);
 #ifndef _WIN32
util/osdep.c +65 -13

127 lines not on this page · raw message

Signature · 1 line
2.26.2
Reviewed-by on v3 2/4
#5 lore raw

Re: [PATCH v3 2/4] util: introduce qemu_open and qemu_create with error reporting

Quoted 10 lines · Daniel P. Berrangé

This introduces two new helper metohds

   int qemu_open(const char *name, int flags, Error **errp);
   int qemu_create(const char *name, int flags, mode_t mode, Error **errp);

Note that with this design we no longer require or even accept the O_CREAT flag. Avoiding overloading the two distinct operations means we can avoid variable arguments which would prevent 'errp' from being the last argument. It also gives us a guarantee that the 'mode' is given when creating files, avoiding a latent security bug.

I like it.

Quoted 12 lines
---
  include/qemu/osdep.h |  6 ++++
  util/osdep.c         | 78 ++++++++++++++++++++++++++++++++++++--------
  2 files changed, 71 insertions(+), 13 deletions(-)
include/qemu/osdep.h +0 -0
index 3a16e58932..ca24ebe211 100644

include/qemu/osdep.h int qemu_madvise(void *addr, size_t len, int advice); · line 499

Quoted 6 lines
include/qemu/osdep.h +3 -0
@@ -494,7 +494,13 @@ int qemu_madvise(void *addr, size_t len, int advice);
  int qemu_mprotect_rwx(void *addr, size_t size);
  int qemu_mprotect_none(void *addr, size_t size);
 
+/*
+ * Don't introduce new usage of this function, prefer the following
+ * qemu_open/qemu_create that take a "Error **errp"

s/a /an /

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org
Reviewed-by on v3 2/4
#6 lore raw

Re: [PATCH v3 2/4] util: introduce qemu_open and qemu_create with error reporting

In reply to Daniel P. Berrangé
Quoted 118 lines · Daniel P. Berrangé

This introduces two new helper metohds

int qemu_open(const char *name, int flags, Error **errp); int qemu_create(const char *name, int flags, mode_t mode, Error **errp);

Note that with this design we no longer require or even accept the O_CREAT flag. Avoiding overloading the two distinct operations means we can avoid variable arguments which would prevent 'errp' from being the last argument. It also gives us a guarantee that the 'mode' is given when creating files, avoiding a latent security bug.

---
 include/qemu/osdep.h |  6 ++++
 util/osdep.c         | 78 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 71 insertions(+), 13 deletions(-)
include/qemu/osdep.h +6 -0
index 3a16e58932..ca24ebe211 100644
@@ -494,7 +494,13 @@ int qemu_madvise(void *addr, size_t len, int advice);
 int qemu_mprotect_rwx(void *addr, size_t size);
 int qemu_mprotect_none(void *addr, size_t size);
 
+/*
+ * Don't introduce new usage of this function, prefer the following
+ * qemu_open/qemu_create that take a "Error **errp"
+ */
 int qemu_open_old(const char *name, int flags, ...);
+int qemu_open(const char *name, int flags, Error **errp);
+int qemu_create(const char *name, int flags, mode_t mode, Error **errp);
 int qemu_close(int fd);
 int qemu_unlink(const char *name);
 #ifndef _WIN32
util/osdep.c +16 -13
index 9df1b6adec..5c0f4684b1 100644
@@ -22,6 +22,7 @@
  * THE SOFTWARE.
  */
 #include "qemu/osdep.h"
+#include "qapi/error.h"
 
 /* Needed early for CONFIG_BSD etc. */
 
@@ -282,10 +283,10 @@ int qemu_lock_fd_test(int fd, int64_t start, int64_t len, bool exclusive)
 /*
  * Opens a file with FD_CLOEXEC set
  */
-int qemu_open_old(const char *name, int flags, ...)
+static int
+qemu_open_internal(const char *name, int flags, mode_t mode, Error **errp)
 {
     int ret;
-    int mode = 0;
 
 #ifndef _WIN32
     const char *fdset_id_str;
@@ -297,24 +298,31 @@ int qemu_open_old(const char *name, int flags, ...)
 
         fdset_id = qemu_parse_fdset(fdset_id_str);
         if (fdset_id == -1) {
+            error_setg(errp, "Could not parse fdset %s", name);
             errno = EINVAL;
             return -1;
         }
 
         fd = monitor_fdset_get_fd(fdset_id, flags);
         if (fd < 0) {
+            error_setg_errno(errp, -fd, "Could not acquire FD for %s flags %x",
+                             name, flags);
             errno = -fd;
             return -1;
         }
 
         dupfd = qemu_dup_flags(fd, flags);
         if (dupfd == -1) {
+            error_setg_errno(errp, errno, "Could not dup FD for %s flags %x",
+                             name, flags);
             return -1;
         }
 
         ret = monitor_fdset_dup_fd_add(fdset_id, dupfd);
         if (ret == -1) {
             close(dupfd);
+            error_setg(errp, "Could not save FD for %s flags %x",
+                       name, flags);
             errno = EINVAL;
             return -1;
         }
@@ -323,22 +331,66 @@ int qemu_open_old(const char *name, int flags, ...)
     }
 #endif
 
-    if (flags & O_CREAT) {
-        va_list ap;
-
-        va_start(ap, flags);
-        mode = va_arg(ap, int);
-        va_end(ap);
-    }
-
 #ifdef O_CLOEXEC
-    ret = open(name, flags | O_CLOEXEC, mode);
-#else
+    flags |= O_CLOEXEC;
+#endif /* O_CLOEXEC */
+
     ret = open(name, flags, mode);
+
+#ifndef O_CLOEXEC
     if (ret >= 0) {
         qemu_set_cloexec(ret);
     }
-#endif
+#endif /* ! O_CLOEXEC */

util/osdep.c int qemu_open_old(const char *name, int flags, ...) · line 354

Quoted 10 lines
util/osdep.c +10 -0
+
+    if (ret == -1) {
+        const char *action = "open";
+        if (flags & O_CREAT) {
+            action = "create";
+        }
+        error_setg_errno(errp, errno, "Could not %s '%s' flags 0x%x",
+                         action, name, flags);
+    }
+

NL--

Quoted 16 lines
util/osdep.c +16 -0
+
+    return ret;
+}
+
+
+int qemu_open(const char *name, int flags, Error **errp)
+{
+    if (flags & O_CREAT) {
+        error_setg(errp,
+                   "Invalid O_CREAT flag passed to qemu_open, use qemu_create");
+        return -1;
+    }
+    return qemu_open_internal(name, flags, 0, errp);
+}
+
+

util/osdep.c int qemu_open_old(const char *name, int flags, ...) · line 380

Quoted 10 lines
util/osdep.c +10 -0
+int qemu_create(const char *name, int flags, mode_t mode, Error **errp)
+{
+    if (flags & O_CREAT) {
+        error_setg(errp, "Redundant O_CREAT flag passed to qemu_create");
+        return -1;
+    }
+    return qemu_open_internal(name, flags | O_CREAT, mode, errp);
+}
+
+

I'd rather see this patch split as:

- extract qemu_open_internal(const char *name, int flags, mode_t mode) from qemu_open_old()

- Add Error **errp to qemu_open_internal()

- add qemu_open() and qemu_create()

Preferably split:

Quoted 17 lines
util/osdep.c +13 -0
+int qemu_open_old(const char *name, int flags, ...)
+{
+    va_list ap;
+    mode_t mode = 0;
+    int ret;
+
+    va_start(ap, flags);
+    if (flags & O_CREAT) {
+        mode = va_arg(ap, int);
+    }
+    va_end(ap);
+
+    ret = qemu_open_internal(name, flags, mode, NULL);
 
 #ifdef O_DIRECT
     if (ret == -1 && errno == EINVAL && (flags & O_DIRECT)) {
#7 lore raw

Re: [PATCH v3 2/4] util: introduce qemu_open and qemu_create with error reporting

In reply to Daniel P. Berrangé
Quoted 1 line · Daniel P. Berrangé

This introduces two new helper metohds

Typo metohds.

Suggest to be a bit more explicit on why we want to replace qemu_open(), perhaps like this:

qemu_open_old() works like open(): set errno and return -1 on failure. It has even more failure modes, though. Reporting the error clearly to users is basically impossible for many of them.

Our standard cure for "errno is too coarse" is the Error object. Introduce two new helper methods:

Quoted 113 lines

int qemu_open(const char *name, int flags, Error **errp); int qemu_create(const char *name, int flags, mode_t mode, Error **errp);

Note that with this design we no longer require or even accept the O_CREAT flag. Avoiding overloading the two distinct operations means we can avoid variable arguments which would prevent 'errp' from being the last argument. It also gives us a guarantee that the 'mode' is given when creating files, avoiding a latent security bug.

---
 include/qemu/osdep.h |  6 ++++
 util/osdep.c         | 78 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 71 insertions(+), 13 deletions(-)
include/qemu/osdep.h +6 -0
index 3a16e58932..ca24ebe211 100644
@@ -494,7 +494,13 @@ int qemu_madvise(void *addr, size_t len, int advice);
 int qemu_mprotect_rwx(void *addr, size_t size);
 int qemu_mprotect_none(void *addr, size_t size);
 
+/*
+ * Don't introduce new usage of this function, prefer the following
+ * qemu_open/qemu_create that take a "Error **errp"
+ */
 int qemu_open_old(const char *name, int flags, ...);
+int qemu_open(const char *name, int flags, Error **errp);
+int qemu_create(const char *name, int flags, mode_t mode, Error **errp);
 int qemu_close(int fd);
 int qemu_unlink(const char *name);
 #ifndef _WIN32
util/osdep.c +15 -12
index 9df1b6adec..5c0f4684b1 100644
@@ -22,6 +22,7 @@
  * THE SOFTWARE.
  */
 #include "qemu/osdep.h"
+#include "qapi/error.h"
 
 /* Needed early for CONFIG_BSD etc. */
 
@@ -282,10 +283,10 @@ int qemu_lock_fd_test(int fd, int64_t start, int64_t len, bool exclusive)
 /*
  * Opens a file with FD_CLOEXEC set
  */
-int qemu_open_old(const char *name, int flags, ...)
+static int
+qemu_open_internal(const char *name, int flags, mode_t mode, Error **errp)
 {
     int ret;
-    int mode = 0;
 
 #ifndef _WIN32
     const char *fdset_id_str;
@@ -297,24 +298,31 @@ int qemu_open_old(const char *name, int flags, ...)
 
         fdset_id = qemu_parse_fdset(fdset_id_str);
         if (fdset_id == -1) {
+            error_setg(errp, "Could not parse fdset %s", name);
             errno = EINVAL;
             return -1;
         }
 
         fd = monitor_fdset_get_fd(fdset_id, flags);
         if (fd < 0) {
+            error_setg_errno(errp, -fd, "Could not acquire FD for %s flags %x",
+                             name, flags);
             errno = -fd;
             return -1;
         }
 
         dupfd = qemu_dup_flags(fd, flags);
         if (dupfd == -1) {
+            error_setg_errno(errp, errno, "Could not dup FD for %s flags %x",
+                             name, flags);
             return -1;
         }
 
         ret = monitor_fdset_dup_fd_add(fdset_id, dupfd);
         if (ret == -1) {
             close(dupfd);
+            error_setg(errp, "Could not save FD for %s flags %x",
+                       name, flags);
             errno = EINVAL;
             return -1;
         }
@@ -323,22 +331,66 @@ int qemu_open_old(const char *name, int flags, ...)
     }
 #endif
 
-    if (flags & O_CREAT) {
-        va_list ap;
-
-        va_start(ap, flags);
-        mode = va_arg(ap, int);
-        va_end(ap);
-    }
-
 #ifdef O_CLOEXEC
-    ret = open(name, flags | O_CLOEXEC, mode);
-#else
+    flags |= O_CLOEXEC;
+#endif /* O_CLOEXEC */
+
     ret = open(name, flags, mode);
+
+#ifndef O_CLOEXEC
     if (ret >= 0) {

util/osdep.c int qemu_open_old(const char *name, int flags, ...) · line 350

Quoted 10 lines
util/osdep.c +7 -1
         qemu_set_cloexec(ret);
     }
-#endif
+#endif /* ! O_CLOEXEC */
+
+    if (ret == -1) {
+        const char *action = "open";
+        if (flags & O_CREAT) {
+            action = "create";
+        }

I'd prefer

           const char *action = flags & O_CREAT ? "create" : "open";

Could even be inlined into the call. Matter of taste.

Quoted 6 lines
util/osdep.c +6 -0
+        error_setg_errno(errp, errno, "Could not %s '%s' flags 0x%x",
+                         action, name, flags);
+    }
+
+
+    return ret;

util/osdep.c int qemu_open_old(const char *name, int flags, ...) · line 366

Quoted 10 lines
util/osdep.c +10 -0
+}
+
+
+int qemu_open(const char *name, int flags, Error **errp)
+{
+    if (flags & O_CREAT) {
+        error_setg(errp,
+                   "Invalid O_CREAT flag passed to qemu_open, use qemu_create");
+        return -1;
+    }

Programming error, hence assert(!(flags & O_CREAT)).

util/osdep.c int qemu_open_old(const char *name, int flags, ...) · line 376

Quoted 10 lines
util/osdep.c +10 -0
+    return qemu_open_internal(name, flags, 0, errp);
+}
+
+
+int qemu_create(const char *name, int flags, mode_t mode, Error **errp)
+{
+    if (flags & O_CREAT) {
+        error_setg(errp, "Redundant O_CREAT flag passed to qemu_create");
+        return -1;
+    }

Likewise.

Quoted 10 lines
util/osdep.c +10 -0
+    return qemu_open_internal(name, flags | O_CREAT, mode, errp);
+}
+
+
+int qemu_open_old(const char *name, int flags, ...)
+{
+    va_list ap;
+    mode_t mode = 0;
+    int ret;
+

util/osdep.c int qemu_open_old(const char *name, int flags, ...) · line 396

Quoted 10 lines
util/osdep.c +7 -0
+    va_start(ap, flags);
+    if (flags & O_CREAT) {
+        mode = va_arg(ap, int);
+    }
+    va_end(ap);
+
+    ret = qemu_open_internal(name, flags, mode, NULL);
 
 #ifdef O_DIRECT
     if (ret == -1 && errno == EINVAL && (flags & O_DIRECT)) {

Other than that, the patch looks good to me.

#8 lore raw

PATCH v3 3/4 util: give a specific error message when O_DIRECT doesn't work

In reply to Daniel P. Berrangé

A common error scenario is to tell QEMU to use O_DIRECT in combination with a filesystem that doesn't support it. To aid users to diagnosing their mistake we want to provide a clear error message when this happens.

---
 util/osdep.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
util/osdep.c +13 -0
index 5c0f4684b1..ac3e7f48f1 100644
@@ -348,6 +348,19 @@ qemu_open_internal(const char *name, int flags, mode_t mode, Error **errp)
         if (flags & O_CREAT) {
             action = "create";
         }
+#ifdef O_DIRECT
+        if (errno == EINVAL && (flags & O_DIRECT)) {
+            ret = open(name, flags & ~O_DIRECT, mode);
+            if (ret != -1) {
+                close(ret);
+                error_setg(errp, "Could not %s '%s' flags 0x%x: "
+                           "filesystem does not support O_DIRECT",
+                           action, name, flags);
+                errno = EINVAL; /* close() clobbered earlier errno */
+                return -1;
+            }
+        }
+#endif /* O_DIRECT */
         error_setg_errno(errp, errno, "Could not %s '%s' flags 0x%x",
                          action, name, flags);
     }
Signature · 1 line
2.26.2
Reviewed-by on v3 3/4
#9 lore raw

Re: [PATCH v3 3/4] util: give a specific error message when O_DIRECT doesn't work

Quoted 9 lines · Daniel P. Berrangé

A common error scenario is to tell QEMU to use O_DIRECT in combination with a filesystem that doesn't support it. To aid users to diagnosing their mistake we want to provide a clear error message when this happens.

---
  util/osdep.c | 13 +++++++++++++
  1 file changed, 13 insertions(+)
Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org
#10 lore raw

PATCH v3 4/4 block: switch to use qemu_open/qemu_create for improved errors

In reply to Daniel P. Berrangé

Currently at startup if using cache=none on a filesystem lacking O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

while at QMP level the hint is missing, so QEMU reports just

  "error": {
      "class": "GenericError",
      "desc": "Could not open '/tmp/foo.img': Invalid argument"
  }

which is close to useless for the end user trying to figure out what they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img' flags 0x4000: filesystem does not support O_DIRECT

while at the QMP level QEMU reports a massively more informative

  "error": {
     "class": "GenericError",
     "desc": "Unable to open '/tmp/foo.img' flags 0x4002: filesystem does not support O_DIRECT"
  }
---
 block/file-posix.c            | 18 +++++++-----------
 block/file-win32.c            |  6 ++----
 tests/qemu-iotests/051.out    |  4 ++--
 tests/qemu-iotests/051.pc.out |  4 ++--
 tests/qemu-iotests/061.out    |  2 +-
 tests/qemu-iotests/069.out    |  2 +-
 tests/qemu-iotests/082.out    |  4 ++--
 tests/qemu-iotests/111.out    |  2 +-
 tests/qemu-iotests/226.out    |  6 +++---
 tests/qemu-iotests/232.out    | 12 ++++++------
 tests/qemu-iotests/244.out    |  6 +++---
 11 files changed, 30 insertions(+), 36 deletions(-)
block/file-posix.c +7 -11
index bac2566f10..c63926d592 100644
@@ -630,11 +630,10 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
     raw_parse_flags(bdrv_flags, &s->open_flags, false);
 
     s->fd = -1;
-    fd = qemu_open_old(filename, s->open_flags, 0644);
+    fd = qemu_open(filename, s->open_flags, errp);
     ret = fd < 0 ? -errno : 0;
 
     if (ret < 0) {
-        error_setg_file_open(errp, -ret, filename);
         if (ret == -EROFS) {
             ret = -EACCES;
         }
@@ -1032,15 +1031,13 @@ static int raw_reconfigure_getfd(BlockDriverState *bs, int flags,
         }
     }
 
-    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open_old() */
+    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
     if (fd == -1) {
         const char *normalized_filename = bs->filename;
         ret = raw_normalize_devicepath(&normalized_filename, errp);
         if (ret >= 0) {
-            assert(!(*open_flags & O_CREAT));
-            fd = qemu_open_old(normalized_filename, *open_flags);
+            fd = qemu_open(normalized_filename, *open_flags, errp);
             if (fd == -1) {
-                error_setg_errno(errp, errno, "Could not reopen file");
                 return -1;
             }
         }
@@ -2411,10 +2408,9 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
     }
 
     /* Create file */
-    fd = qemu_open_old(file_opts->filename, O_RDWR | O_CREAT | O_BINARY, 0644);
+    fd = qemu_create(file_opts->filename, O_RDWR | O_BINARY, 0644, errp);
     if (fd < 0) {
         result = -errno;
-        error_setg_errno(errp, -result, "Could not create file");
         goto out;
     }
 
@@ -3335,7 +3331,7 @@ static bool setup_cdrom(char *bsd_path, Error **errp)
     for (index = 0; index < num_of_test_partitions; index++) {
         snprintf(test_partition, sizeof(test_partition), "%ss%d", bsd_path,
                  index);
-        fd = qemu_open_old(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE);
+        fd = qemu_open(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE, NULL);
         if (fd >= 0) {
             partition_found = true;
             qemu_close(fd);
@@ -3653,7 +3649,7 @@ static int cdrom_probe_device(const char *filename)
     int prio = 0;
     struct stat st;
 
-    fd = qemu_open_old(filename, O_RDONLY | O_NONBLOCK);
+    fd = qemu_open(filename, O_RDONLY | O_NONBLOCK, NULL);
     if (fd < 0) {
         goto out;
     }
@@ -3787,7 +3783,7 @@ static int cdrom_reopen(BlockDriverState *bs)
      */
     if (s->fd >= 0)
         qemu_close(s->fd);
-    fd = qemu_open_old(bs->filename, s->open_flags, 0644);
+    fd = qemu_open(bs->filename, s->open_flags, NULL);
     if (fd < 0) {
         s->fd = -1;
         return -EIO;
block/file-win32.c +2 -4
index 8c1845830e..1a31f8a5ba 100644
@@ -576,11 +576,9 @@ static int raw_co_create(BlockdevCreateOptions *options, Error **errp)
         return -EINVAL;
     }
 
-    fd = qemu_open_old(file_opts->filename,
-                       O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
-                       0644);
+    fd = qemu_create(file_opts->filename, O_WRONLY | O_TRUNC | O_BINARY,
+                     0644, errp);
     if (fd < 0) {
-        error_setg_errno(errp, errno, "Could not create file");
         return -EIO;
     }
     set_sparse(fd);
tests/qemu-iotests/051.out +2 -2
index de4771bcb3..242dcfe08d 100644
@@ -363,7 +363,7 @@ Testing: -drive file=foo:bar
 QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
 
 Testing: -drive file.filename=foo:bar
-QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
+QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar' flags 0x08000: No such file or directory
 
 Testing: -hda file:TEST_DIR/t.qcow2
 QEMU X.Y.Z monitor - type 'help' for more information
@@ -374,7 +374,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) quit
 
 Testing: -drive file.filename=file:TEST_DIR/t.qcow2
-QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2' flags 0x80000: No such file or directory
 
 
 === Snapshot mode ===
tests/qemu-iotests/051.pc.out +2 -2
index f707471fb0..4c41b46986 100644
@@ -463,7 +463,7 @@ Testing: -drive file=foo:bar
 QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
 
 Testing: -drive file.filename=foo:bar
-QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
+QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar' flags 0x80000: No such file or directory
 
 Testing: -hda file:TEST_DIR/t.qcow2
 QEMU X.Y.Z monitor - type 'help' for more information
@@ -474,7 +474,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) quit
 
 Testing: -drive file.filename=file:TEST_DIR/t.qcow2
-QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2' flags 0x80000: No such file or directory
 
 
 === Snapshot mode ===
tests/qemu-iotests/061.out +1 -1
index b2d2dfed04..a533b0d416 100644
@@ -538,7 +538,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
 qemu-img: data-file can only be set for images that use an external data file
 
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data
-qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Could not open 'foo': No such file or directory
+qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Could not open 'foo' flags 0x80000: No such file or directory
 image: TEST_DIR/t.IMGFMT
 file format: IMGFMT
 virtual size: 64 MiB (67108864 bytes)
tests/qemu-iotests/069.out +1 -1
index 126b4d2d51..ffb95c965f 100644
@@ -4,5 +4,5 @@ QA output created by 069
 
 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=131072
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
-qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory
+qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base' flags 0x80000: No such file or directory
 *** done
tests/qemu-iotests/082.out +2 -2
index 1728aff1e0..5a718ac1b5 100644
@@ -544,10 +544,10 @@ Supported options:
   size=<size>            - Virtual disk size
 
 Testing: convert -O qcow2 -o backing_fmt=qcow2,backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,help': No such file or directory
+qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,help' flags 0x80000: No such file or directory
 
 Testing: convert -O qcow2 -o backing_fmt=qcow2,backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,?': No such file or directory
+qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,?' flags 0x80000: No such file or directory
 
 Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
 qemu-img: Invalid option list: backing_file=TEST_DIR/t.qcow2,
tests/qemu-iotests/111.out +1 -1
index ba034e5c58..90255ea653 100644
@@ -1,4 +1,4 @@
 QA output created by 111
-qemu-img: TEST_DIR/t.IMGFMT: Could not open 'TEST_DIR/t.IMGFMT.inexistent': No such file or directory
+qemu-img: TEST_DIR/t.IMGFMT: Could not open 'TEST_DIR/t.IMGFMT.inexistent' flags 0x80000: No such file or directory
 Could not open backing image.
 *** done
tests/qemu-iotests/226.out +3 -3
index 42be973ff2..353fc4c799 100644
@@ -6,7 +6,7 @@ QA output created by 226
 qemu-io: can't open: A regular file was expected by the 'file' driver, but something else was given
 qemu-io: warning: Opening a character device as a file using the 'file' driver is deprecated
 == Testing RW ==
-qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Is a directory
 qemu-io: warning: Opening a character device as a file using the 'file' driver is deprecated
 
 === Testing with driver:host_device ===
@@ -14,13 +14,13 @@ qemu-io: warning: Opening a character device as a file using the 'file' driver i
 == Testing RO ==
 qemu-io: can't open: 'host_device' driver expects either a character or block device
 == Testing RW ==
-qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Is a directory
 
 === Testing with driver:host_cdrom ===
 
 == Testing RO ==
 qemu-io: can't open: 'host_cdrom' driver expects either a character or block device
 == Testing RW ==
-qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80802: Is a directory
 
 *** done
tests/qemu-iotests/232.out +6 -6
index 3bd1a920af..bfa3f20172 100644
@@ -21,11 +21,11 @@ NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
 NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
 NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
 
-QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
 NODE_NAME: TEST_DIR/t.IMGFMT (file)
 NODE_NAME: TEST_DIR/t.IMGFMT (file)
 
-QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
 NODE_NAME: TEST_DIR/t.IMGFMT (file)
 NODE_NAME: TEST_DIR/t.IMGFMT (file)
 
@@ -49,11 +49,11 @@ node0: TEST_DIR/t.IMGFMT (file, read-only)
 node0: TEST_DIR/t.IMGFMT (file, read-only)
 node0: TEST_DIR/t.IMGFMT (file, read-only)
 
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
 node0: TEST_DIR/t.IMGFMT (file)
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
 
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
 node0: TEST_DIR/t.IMGFMT (file)
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
 *** done
tests/qemu-iotests/244.out +3 -3
index dbab7359a9..34daec97f2 100644
@@ -9,7 +9,7 @@ read 65536/65536 bytes at offset 0
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 read 65536/65536 bytes at offset 0
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent' flags 0x80002: No such file or directory
 no file open, try 'help open'
 
 Data file required, but without data file name in the image:
@@ -17,14 +17,14 @@ qemu-io: can't open device TEST_DIR/t.qcow2: 'data-file' is required for this im
 no file open, try 'help open'
 read 65536/65536 bytes at offset 0
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent' flags 0x80002: No such file or directory
 no file open, try 'help open'
 
 Setting data-file for an image with internal data:
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
 qemu-io: can't open device TEST_DIR/t.qcow2: 'data-file' can only be set for images with an external data file
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent' flags 0x80002: No such file or directory
 no file open, try 'help open'
 
 === Conflicting features ===
Signature · 1 line
2.26.2
Reviewed-by on v3 4/4
#11 lore raw

Re: [PATCH v3 4/4] block: switch to use qemu_open/qemu_create for improved errors

Quoted 5 lines · Daniel P. Berrangé

Currently at startup if using cache=none on a filesystem lacking O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

Are we trying to get this in 5.1?

Quoted 26 lines

while at QMP level the hint is missing, so QEMU reports just

   "error": {
       "class": "GenericError",
       "desc": "Could not open '/tmp/foo.img': Invalid argument"
   }

which is close to useless for the end user trying to figure out what they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img' flags 0x4000: filesystem does not support O_DIRECT

while at the QMP level QEMU reports a massively more informative

   "error": {
      "class": "GenericError",
      "desc": "Unable to open '/tmp/foo.img' flags 0x4002: filesystem does not support O_DIRECT"
   }

---

block/file-posix.c static bool setup_cdrom(char *bsd_path, Error **errp) · line 3334

Quoted 5 lines
block/file-posix.c +1 -1
@@ -3335,7 +3331,7 @@ static bool setup_cdrom(char *bsd_path, Error **errp)
      for (index = 0; index < num_of_test_partitions; index++) {
          snprintf(test_partition, sizeof(test_partition), "%ss%d", bsd_path,
                   index);
-        fd = qemu_open_old(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE);
+        fd = qemu_open(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE, NULL);

Should qemu_open() always be setting O_BINARY|O_LARGEFILE, without us having to worry about them at each caller? But that's a separate cleanup.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org
#12 lore raw

Re: [PATCH v3 4/4] block: switch to use qemu_open/qemu_create for improved errors

Quoted 8 lines · Eric Blake
Quoted 5 lines · Daniel P. Berrangé

Currently at startup if using cache=none on a filesystem lacking O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

Are we trying to get this in 5.1?

It is probably verging on too late to justify for the rc

Quoted 26 lines
Quoted 25 lines

while at QMP level the hint is missing, so QEMU reports just

   "error": {
       "class": "GenericError",
       "desc": "Could not open '/tmp/foo.img': Invalid argument"
   }

which is close to useless for the end user trying to figure out what they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img' flags 0x4000: filesystem does not support O_DIRECT

while at the QMP level QEMU reports a massively more informative

   "error": {
      "class": "GenericError",
      "desc": "Unable to open '/tmp/foo.img' flags 0x4002: filesystem does not support O_DIRECT"
   }

---

Quoted 9 lines

block/file-posix.c static bool setup_cdrom(char *bsd_path, Error **errp) · line 3334

Quoted 6 lines
block/file-posix.c +1 -1
@@ -3335,7 +3331,7 @@ static bool setup_cdrom(char *bsd_path, Error **errp)
      for (index = 0; index < num_of_test_partitions; index++) {
          snprintf(test_partition, sizeof(test_partition), "%ss%d", bsd_path,
                   index);
-        fd = qemu_open_old(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE);
+        fd = qemu_open(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE, NULL);

Should qemu_open() always be setting O_BINARY|O_LARGEFILE, without us having to worry about them at each caller? But that's a separate cleanup.

Hmm, I think both of these are dead code.

IIUC, O_BINARY is a no-op on any platform except Windows, and this is file-posix.c, and O_LARGEFILE is a no-op, if you have _FILE_OFFSET_BITS=64, which we hardcode.

Quoted 1 line

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
Reviewed-by on v3 4/4
#13 lore raw

Re: [PATCH v3 4/4] block: switch to use qemu_open/qemu_create for improved errors

In reply to Daniel P. Berrangé
Quoted 78 lines · Daniel P. Berrangé

Currently at startup if using cache=none on a filesystem lacking O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

while at QMP level the hint is missing, so QEMU reports just

  "error": {
      "class": "GenericError",
      "desc": "Could not open '/tmp/foo.img': Invalid argument"
  }

which is close to useless for the end user trying to figure out what they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img' flags 0x4000: filesystem does not support O_DIRECT

while at the QMP level QEMU reports a massively more informative

  "error": {
     "class": "GenericError",
     "desc": "Unable to open '/tmp/foo.img' flags 0x4002: filesystem does not support O_DIRECT"
  }
---
 block/file-posix.c            | 18 +++++++-----------
 block/file-win32.c            |  6 ++----
 tests/qemu-iotests/051.out    |  4 ++--
 tests/qemu-iotests/051.pc.out |  4 ++--
 tests/qemu-iotests/061.out    |  2 +-
 tests/qemu-iotests/069.out    |  2 +-
 tests/qemu-iotests/082.out    |  4 ++--
 tests/qemu-iotests/111.out    |  2 +-
 tests/qemu-iotests/226.out    |  6 +++---
 tests/qemu-iotests/232.out    | 12 ++++++------
 tests/qemu-iotests/244.out    |  6 +++---
 11 files changed, 30 insertions(+), 36 deletions(-)
block/file-posix.c +3 -6
index bac2566f10..c63926d592 100644
@@ -630,11 +630,10 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
     raw_parse_flags(bdrv_flags, &s->open_flags, false);
 
     s->fd = -1;
-    fd = qemu_open_old(filename, s->open_flags, 0644);
+    fd = qemu_open(filename, s->open_flags, errp);
     ret = fd < 0 ? -errno : 0;
 
     if (ret < 0) {
-        error_setg_file_open(errp, -ret, filename);
         if (ret == -EROFS) {
             ret = -EACCES;
         }
@@ -1032,15 +1031,13 @@ static int raw_reconfigure_getfd(BlockDriverState *bs, int flags,
         }
     }
 
-    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open_old() */
+    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
     if (fd == -1) {
         const char *normalized_filename = bs->filename;
         ret = raw_normalize_devicepath(&normalized_filename, errp);
         if (ret >= 0) {
-            assert(!(*open_flags & O_CREAT));
-            fd = qemu_open_old(normalized_filename, *open_flags);
+            fd = qemu_open(normalized_filename, *open_flags, errp);
             if (fd == -1) {
-                error_setg_errno(errp, errno, "Could not reopen file");
                 return -1;
             }
         }

block/file-posix.c raw_co_create(BlockdevCreateOptions *options, Error **errp) · line 2415

Quoted 10 lines
block/file-posix.c +1 -2
@@ -2411,10 +2408,9 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
     }
 
     /* Create file */
-    fd = qemu_open_old(file_opts->filename, O_RDWR | O_CREAT | O_BINARY, 0644);
+    fd = qemu_create(file_opts->filename, O_RDWR | O_BINARY, 0644, errp);
     if (fd < 0) {
         result = -errno;
-        error_setg_errno(errp, -result, "Could not create file");
         goto out;
     }

[...]

Nice :)

I haven't checked the iotest errors; assuming a CI will take care of it:

#14 lore raw

Re: [PATCH v3 4/4] block: switch to use qemu_open/qemu_create for improved errors

In reply to Daniel P. Berrangé
Quoted 20 lines · Daniel P. Berrangé

Currently at startup if using cache=none on a filesystem lacking O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

while at QMP level the hint is missing, so QEMU reports just

  "error": {
      "class": "GenericError",
      "desc": "Could not open '/tmp/foo.img': Invalid argument"
  }

which is close to useless for the end user trying to figure out what they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img' flags 0x4000: filesystem does not support O_DIRECT

Quoted 8 lines

while at the QMP level QEMU reports a massively more informative

  "error": {
     "class": "GenericError",
     "desc": "Unable to open '/tmp/foo.img' flags 0x4002: filesystem does not support O_DIRECT"
  }

Subject promises slightly more than the patch actually provides:

    block/vvfat.c:1355:        int fd = qemu_open(mapping->path, O_RDONLY | O_BINARY | O_LARGEFILE);
    block/vvfat.c:2516:    fd = qemu_open(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666);

If you'd rather not touch block/vvfat.c (I understand), consider tweaking the subject to say

    block/file: ...