configs/bananapi_m2_zero: new defconfig
PATCH 1/1 configs/bananapi_m2_zero: new defconfig
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
--- DEVELOPERS | 2 ++ board/bananapi/bananapi-m2-zero/boot.cmd | 7 ++++ board/bananapi/bananapi-m2-zero/genimage.cfg | 33 +++++++++++++++++++ board/bananapi/bananapi-m2-zero/readme.txt | 34 ++++++++++++++++++++ configs/bananapi_m2_zero_defconfig | 31 ++++++++++++++++++ 5 files changed, 107 insertions(+) create mode 100644 board/bananapi/bananapi-m2-zero/boot.cmd create mode 100644 board/bananapi/bananapi-m2-zero/genimage.cfg create mode 100644 board/bananapi/bananapi-m2-zero/readme.txt create mode 100644 configs/bananapi_m2_zero_defconfig
DEVELOPERS +2 -0
@@ -2579,6 +2579,8 @@ F: package/nss-myhostname/ F: package/utp_com/ N: Vincent Stehl? <[email protected]> +F: board/bananapi/bananapi-m2-zero/ +F: configs/bananapi_m2_zero_defconfig F: package/i7z/ F: package/msr-tools/ F: package/pixz/
board/bananapi/bananapi-m2-zero/boot.cmd new file +7 -0
@@ -0,0 +1,7 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +mmc dev 0 +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h2-plus-bananapi-m2-zero.dtb + +bootz $kernel_addr_r - $fdt_addr_r
board/bananapi/bananapi-m2-zero/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h2-plus-bananapi-m2-zero.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/bananapi/bananapi-m2-zero/readme.txt new file +34 -0
@@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +Buildroot environment for the Bananapi M2 Zero. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Bananapi M2 Zero link: +http://www.banana-pi.org/m2z.html + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make bananapi_m2_zero_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sync + +Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console +is on the Debug UART on the CON3 header, with serial settings 115200 8N1.
configs/bananapi_m2_zero_defconfig new file +31 -0
@@ -0,0 +1,31 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_NEON_VFPV4=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_6=y +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Bananapi M2 Zero" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-zero/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.6.4" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-bananapi-m2-zero" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="bananapi_m2_zero" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m2-zero/boot.cmd" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +# U-boot needs python3 +BR2_PACKAGE_HOST_PYTHON3=y
Signature · 1 line
2.25.1
PATCH v2 1/1 configs/bananapi_m2_zero: new defconfig
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
---
Changes since v1:
- Bump Linux version
DEVELOPERS | 2 ++ board/bananapi/bananapi-m2-zero/boot.cmd | 7 ++++ board/bananapi/bananapi-m2-zero/genimage.cfg | 33 +++++++++++++++++++ board/bananapi/bananapi-m2-zero/readme.txt | 34 ++++++++++++++++++++ configs/bananapi_m2_zero_defconfig | 31 ++++++++++++++++++ 5 files changed, 107 insertions(+) create mode 100644 board/bananapi/bananapi-m2-zero/boot.cmd create mode 100644 board/bananapi/bananapi-m2-zero/genimage.cfg create mode 100644 board/bananapi/bananapi-m2-zero/readme.txt create mode 100644 configs/bananapi_m2_zero_defconfig
DEVELOPERS +2 -0
@@ -2592,6 +2592,8 @@ F: package/nss-myhostname/ F: package/utp_com/ N: Vincent Stehl? <[email protected]> +F: board/bananapi/bananapi-m2-zero/ +F: configs/bananapi_m2_zero_defconfig F: package/i7z/ F: package/msr-tools/ F: package/pixz/
board/bananapi/bananapi-m2-zero/boot.cmd new file +7 -0
@@ -0,0 +1,7 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +mmc dev 0 +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h2-plus-bananapi-m2-zero.dtb + +bootz $kernel_addr_r - $fdt_addr_r
board/bananapi/bananapi-m2-zero/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h2-plus-bananapi-m2-zero.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/bananapi/bananapi-m2-zero/readme.txt new file +34 -0
@@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +Buildroot environment for the Bananapi M2 Zero. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Bananapi M2 Zero link: +http://www.banana-pi.org/m2z.html + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make bananapi_m2_zero_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sync + +Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console +is on the Debug UART on the CON3 header, with serial settings 115200 8N1.
configs/bananapi_m2_zero_defconfig new file +31 -0
@@ -0,0 +1,31 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_NEON_VFPV4=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_6=y +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Bananapi M2 Zero" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-zero/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.6.7" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-bananapi-m2-zero" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="bananapi_m2_zero" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m2-zero/boot.cmd" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +# U-boot needs python3 +BR2_PACKAGE_HOST_PYTHON3=y
Signature · 1 line
2.26.2
PATCH v2 1/1 configs/bananapi_m2_zero: new defconfig
Quoted 9 lines · On Thu, 7 May 2020 18:45:19 +0200 Vincent Stehl? <[email protected]>…
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
Signed-off-by Vincent Stehl? <[email protected]>
Thanks, I've applied.
configs/bananapi_m2_zero_defconfig line 31
Quoted 2 lines
configs/bananapi_m2_zero_defconfig new file +2
-0+# U-boot needs python3 +BR2_PACKAGE_HOST_PYTHON3=y
We now have a better way of doing this, so I used the new way, i.e:
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com