Add LT9611 DSI to HDMI bridge
Subsystems (5)
v6 cover Add LT9611 DSI to HDMI bridge
Hi,
This series adds driver and bindings for Lontium LT9611 bridge chip which takes MIPI DSI as input and HDMI as output.
This chip can be found in 96boards RB3 platform [1] commonly called DB845c.
[1]: https://www.96boards.org/product/rb3-platform/
Changes in v6:
- Drop msm/dsi patch as we need to get more bridges fixed before we add that
- Bring back support for DRM_BRIDGE_ATTACH_NO_CONNECTOR not set, now driver supports both
- Fix nits found by Sam
Changes in v5:
- make symbol static, reported by kbuild-bot
Changes in v4:
- Add msm/dsi patch to create connector and support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Fix comments provided by Sam
Changes in v3:
- fix kbuild reported error
- rebase on v5.8-rc1
Changes in v2:
- Add acks by Rob
- Fix comments reported by Emil and rename the file to lontium-lt9611.c
- Fix comments reported by Laurent on binding and driver
- Add HDMI audio support
Vinod Koul (3):
dt-bindings: vendor-prefixes: Add Lontium vendor prefix
dt-bindings: display: bridge: Add documentation for LT9611 drm/bridge: Introduce LT9611 DSI to HDMI bridge
.../display/bridge/lontium,lt9611.yaml | 176 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt9611.c | 1229 +++++++++++++++++ 5 files changed, 1421 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c
Signature · 6 lines
2.26.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v6 1/3 dt-bindings: vendor-prefixes: Add Lontium vendor prefix
Add prefix for Lontium Semiconductor Corporation
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -595,6 +595,8 @@ patternProperties: description: Logic Technologies Limited "^longcheer,.*": description: Longcheer Technology (Shanghai) Co., Ltd. + "^lontium,.*": + description: Lontium Semiconductor Corporation "^loongson,.*": description: Loongson Technology Corporation Limited "^lsi,.*":
Signature · 6 lines
2.26.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v6 2/3 dt-bindings: display: bridge: Add documentation for LT9611
In reply to Vinod KoulLontium LT9611 is a DSI to HDMI bridge which supports 2 DSI ports and I2S port as input and one HDMI port as output
--- .../display/bridge/lontium,lt9611.yaml | 176 ++++++++++++++++++ 1 file changed, 176 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml new file +176 -0
@@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul <[email protected]> + +description: | + The LT9611 is a bridge device which converts DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Primary MIPI port-1 for MIPI input + + properties: + reg: + const: 0 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@1: + type: object + description: | + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + properties: + reg: + const: 1 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@2: + type: object + description: | + HDMI port for HDMI output + + properties: + reg: + const: 2 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +...
Signature · 6 lines
2.26.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v6 3/3 drm/bridge: Introduce LT9611 DSI to HDMI bridge
In reply to Vinod KoulLontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output
--- drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt9611.c | 1229 +++++++++++++++++++++++ 3 files changed, 1243 insertions(+) create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c
drivers/gpu/drm/bridge/Kconfig +13 -0
@@ -48,6 +48,19 @@ config DRM_DISPLAY_CONNECTOR on ARM-based platforms. Saying Y here when this driver is not needed will not cause any issue. +config DRM_LONTIUM_LT9611 + tristate "Lontium LT9611 DSI/HDMI bridge" + select SND_SOC_HDMI_CODEC if SND_SOC + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select REGMAP_I2C + help + Driver for Lontium LT9611 DSI to HDMI bridge + chip driver that converts dual DSI and I2S to + HDMI signals + Please say Y if you have such hardware. + config DRM_LVDS_CODEC tristate "Transparent LVDS encoders and decoders support" depends on OF
drivers/gpu/drm/bridge/Makefile +1 -0
@@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o +obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
drivers/gpu/drm/bridge/lontium-lt9611.c new file +1229 -0
1,229 lines not on this page · raw message
Signature · 6 lines
2.26.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Vinod.
Quoted 32 lines · Vinod Koul
Hi,
This series adds driver and bindings for Lontium LT9611 bridge chip which takes MIPI DSI as input and HDMI as output.
This chip can be found in 96boards RB3 platform [1] commonly called DB845c.
[1]: https://www.96boards.org/product/rb3-platform/
Changes in v6:
- Drop msm/dsi patch as we need to get more bridges fixed before we add that
- Bring back support forDRM_BRIDGE_ATTACH_NO_CONNECTORnot set, now driver supports both
- Fix nits found by SamChanges in v5:
- make symbol static, reported by kbuild-botChanges in v4:
- Add msm/dsi patch to create connector and supportDRM_BRIDGE_ATTACH_NO_CONNECTOR
- Fix comments provided by SamChanges in v3:
- fix kbuild reported error
- rebase on v5.8-rc1Changes in v2:
- Add acks by Rob
- Fix comments reported by Emil and rename the file tolontium-lt9611.c
- Fix comments reported by Laurent on binding and driver
- Add HDMI audio support
Quoted 4 lines
Vinod Koul (3):
dt-bindings: vendor-prefixes: Add Lontium vendor prefix
dt-bindings: display: bridge: Add documentation for LT9611 drm/bridge: Introduce LT9611 DSI to HDMI bridge
Fixed prototype for lt9611_bridge_mode_valid() and applied the series to drm-misc-next.
Sam
Quoted 17 lines
.../display/bridge/lontium,lt9611.yaml | 176 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt9611.c | 1229 +++++++++++++++++ 5 files changed, 1421 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.cSignature · 6 lines
2.26.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel