Skip to contentSkip to conversation

Some bug fix for lpspi

PATCH In review Clark Wang 2 participants 6 messages Jul 27, 2020 – Jul 31, 2020

Subsystems (2)
lore
Share & tools
lore

Clark Wang

author
#0 lore raw

v2 cover Some bug fix for lpspi

Hi,

This patchset mainly fixes some recently discovered problems about CS for LPSPI module on i.MX8DXLEVK.

Add the dt-bindings description for the new property.

Clark Wang (4):
spi: lpspi: Fix kernel warning dump when probe fail after calling
spi_register
spi: lpspi: remove unused fsl_lpspi->chipselect
spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
dt-bindings: lpspi: New property in document DT bindings for LPSPI

 .../bindings/spi/spi-fsl-lpspi.yaml           |  7 ++++++
 drivers/spi/spi-fsl-lpspi.c                   | 25 +++++++++++--------
 2 files changed, 21 insertions(+), 11 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v2 1/4 spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register

Calling devm_spi_register_controller() too early will cause problem. When probe failed occurs after calling devm_spi_register_controller(), the call of spi_controller_put() will trigger the following warning dump.

[    2.092138] ------------[ cut here ]------------
[    2.096876] kernfs: can not remove 'uevent', no directory
[    2.102440] WARNING: CPU: 0 PID: 181 at fs/kernfs/dir.c:1503 kernfs_remove_by_name_ns+0xa0/0xb0
[    2.111142] Modules linked in:
[    2.114207] CPU: 0 PID: 181 Comm: kworker/0:7 Not tainted 5.4.24-05024-g775c6e8a738c-dirty #1314
[    2.122991] Hardware name: Freescale i.MX8DXL EVK (DT)
[    2.128141] Workqueue: events deferred_probe_work_func
[    2.133281] pstate: 60000005 (nZCv daif -PAN -UAO)
[    2.138076] pc : kernfs_remove_by_name_ns+0xa0/0xb0
[    2.142958] lr : kernfs_remove_by_name_ns+0xa0/0xb0
[    2.147837] sp : ffff8000122bba70
[    2.151145] x29: ffff8000122bba70 x28: ffff8000119d6000
[    2.156462] x27: 0000000000000000 x26: ffff800011edbce8
[    2.161779] x25: 0000000000000000 x24: ffff00003ae4f700
[    2.167096] x23: ffff000010184c10 x22: ffff00003a3d6200
[    2.172412] x21: ffff800011a464a8 x20: ffff000010126a68
[    2.177729] x19: ffff00003ae5c800 x18: 000000000000000e
[    2.183046] x17: 0000000000000001 x16: 0000000000000019
[    2.188362] x15: 0000000000000004 x14: 000000000000004c
[    2.193679] x13: 0000000000000000 x12: 0000000000000001
[    2.198996] x11: 0000000000000000 x10: 00000000000009c0
[    2.204313] x9 : ffff8000122bb7a0 x8 : ffff00003a3d6c20
[    2.209630] x7 : ffff00003a3d6380 x6 : 0000000000000001
[    2.214946] x5 : 0000000000000001 x4 : ffff00003a05eb18
[    2.220263] x3 : 0000000000000005 x2 : ffff8000119f1c48
[    2.225580] x1 : 2bcbda323bf5a800 x0 : 0000000000000000
[    2.230898] Call trace:
[    2.233345]  kernfs_remove_by_name_ns+0xa0/0xb0
[    2.237879]  sysfs_remove_file_ns+0x14/0x20
[    2.242065]  device_del+0x12c/0x348
[    2.245555]  device_unregister+0x14/0x30
[    2.249492]  spi_unregister_controller+0xac/0x120
[    2.254201]  devm_spi_unregister+0x10/0x18
[    2.258304]  release_nodes+0x1a8/0x220
[    2.262055]  devres_release_all+0x34/0x58
[    2.266069]  really_probe+0x1b8/0x318
[    2.269733]  driver_probe_device+0x54/0xe8
[    2.273833]  __device_attach_driver+0x80/0xb8
[    2.278194]  bus_for_each_drv+0x74/0xc0
[    2.282034]  __device_attach+0xdc/0x138
[    2.285876]  device_initial_probe+0x10/0x18
[    2.290063]  bus_probe_device+0x90/0x98
[    2.293901]  deferred_probe_work_func+0x64/0x98
[    2.298442]  process_one_work+0x198/0x320
[    2.302451]  worker_thread+0x1f0/0x420
[    2.306208]  kthread+0xf0/0x120
[    2.309352]  ret_from_fork+0x10/0x18
[    2.312927] ---[ end trace 58abcdfae01bd3c7 ]---

So put this function at the end of the probe sequence.

---
Changes:
V2:
- redo the patch base on the new code.

---
 drivers/spi/spi-fsl-lpspi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/spi/spi-fsl-lpspi.c +6 -6
index a4a42e85e132..b0a1bb62f10a 100644
@@ -850,12 +850,6 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	if (!fsl_lpspi->is_slave)
 		controller->use_gpio_descriptors = true;
 
-	ret = devm_spi_register_controller(&pdev->dev, controller);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "spi_register_controller error.\n");
-		goto out_controller_put;
-	}
-
 	init_completion(&fsl_lpspi->xfer_done);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -913,6 +907,12 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
 
+	ret = devm_spi_register_controller(&pdev->dev, controller);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "spi_register_controller error.\n");
+		goto out_pm_get;
+	}
+
 	pm_runtime_mark_last_busy(fsl_lpspi->dev);
 	pm_runtime_put_autosuspend(fsl_lpspi->dev);
 
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH V2 1/4] spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register

Quoted 11 lines · Clark Wang

Calling devm_spi_register_controller() too early will cause problem. When probe failed occurs after calling devm_spi_register_controller(), the call of spi_controller_put() will trigger the following warning dump.

[    2.092138] ------------[ cut here ]------------
[    2.096876] kernfs: can not remove 'uevent', no directory
[    2.102440] WARNING: CPU: 0 PID: 181 at fs/kernfs/dir.c:1503 kernfs_remove_by_name_ns+0xa0/0xb0
[    2.111142] Modules linked in:
[    2.114207] CPU: 0 PID: 181 Comm: kworker/0:7 Not tainted 5.4.24-05024-g775c6e8a738c-dirty #1314
[    2.122991] Hardware name: Freescale i.MX8DXL EVK (DT)
[    2.128141] Workqueue: events deferred_probe_work_func

Please think hard before including complete backtraces in upstream reports, they are very large and contain almost no useful information relative to their size so often obscure the relevant content in your message. If part of the backtrace is usefully illustrative (it often is for search engines if nothing else) then it's usually better to pull out the relevant sections.

author
#3 lore raw

RE: [EXT] Re: [PATCH V2 1/4] spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register

Quoted 21 lines

-----Original Message-----
From: Mark Brown <[email protected]>
Sent: Monday, July 27, 2020 19:11
To: Clark Wang <[email protected]>
Cc: [email protected]; [email protected]
Subject: [EXT] Re: [PATCH V2 1/4] spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register

Quoted 7 lines · Clark Wang

Calling devm_spi_register_controller() too early will cause problem. When probe failed occurs after calling devm_spi_register_controller(), the call of spi_controller_put() will trigger the following warning dump.

[    2.092138] ------------[ cut here ]------------
[    2.096876] kernfs: can not remove 'uevent', no directory
[    2.102440] WARNING: CPU: 0 PID: 181 at fs/kernfs/dir.c:1503

kernfs_remove_by_name_ns+0xa0/0xb0

Quoted 2 lines
[    2.111142] Modules linked in:
[    2.114207] CPU: 0 PID: 181 Comm: kworker/0:7 Not tainted 5.4.24-05024-

g775c6e8a738c-dirty #1314

Quoted 8 lines
Quoted 2 lines
[    2.122991] Hardware name: Freescale i.MX8DXL EVK (DT)
[    2.128141] Workqueue: events deferred_probe_work_func

Please think hard before including complete backtraces in upstream reports, they are very large and contain almost no useful information relative to their size so often obscure the relevant content in your message. If part of the backtrace is usefully illustrative (it often is for search engines if nothing else) then it's usually better to pull out the relevant sections.

Hi Mark,

Thank you very much for reminding.
I will remove the redundant part when I meet similar situations in the future. 😊

Best Regards,
Clark Wang

author
#4 lore raw

PATCH v2 2/4 spi: lpspi: remove unused fsl_lpspi->chipselect

In reply to Clark Wang

The cs-gpio is initailized by spi_get_gpio_descs() now. Remove the chipselect.

---
Changes:
V2:
- New patch added in the v2 patchset.

---
 drivers/spi/spi-fsl-lpspi.c | 2 --
 1 file changed, 2 deletions(-)
drivers/spi/spi-fsl-lpspi.c +0 -2
index b0a1bb62f10a..1e426884ac37 100644
@@ -119,8 +119,6 @@ struct fsl_lpspi_data {
 	bool usedma;
 	struct completion dma_rx_completion;
 	struct completion dma_tx_completion;
-
-	int chipselect[];
 };
 
 static const struct of_device_id fsl_lpspi_dt_ids[] = {
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH v2 3/4 spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK

In reply to Clark Wang

SPI common code does not support using CS discontinuously for now. However, i.MX8DXL-EVK only uses CS1 without CS0. Therefore, add a flag is_only_cs1 to set the correct TCR[PCS].

---
Changes:
V2:
- No changes.

---
 drivers/spi/spi-fsl-lpspi.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/spi/spi-fsl-lpspi.c +8 -3
index 1e426884ac37..85a5c952389a 100644
@@ -98,6 +98,7 @@ struct fsl_lpspi_data {
 	struct clk *clk_ipg;
 	struct clk *clk_per;
 	bool is_slave;
+	bool is_only_cs1;
 	bool is_first_byte;
 
 	void *rx_buf;
@@ -257,10 +258,9 @@ static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi)
 
 	temp |= fsl_lpspi->config.bpw - 1;
 	temp |= (fsl_lpspi->config.mode & 0x3) << 30;
+	temp |= (fsl_lpspi->config.chip_select & 0x3) << 24;
 	if (!fsl_lpspi->is_slave) {
 		temp |= fsl_lpspi->config.prescale << 27;
-		temp |= (fsl_lpspi->config.chip_select & 0x3) << 24;
-
 		/*
 		 * Set TCR_CONT will keep SS asserted after current transfer.
 		 * For the first transfer, clear TCR_CONTC to assert SS.
@@ -421,7 +421,10 @@ static int fsl_lpspi_setup_transfer(struct spi_controller *controller,
 	fsl_lpspi->config.mode = spi->mode;
 	fsl_lpspi->config.bpw = t->bits_per_word;
 	fsl_lpspi->config.speed_hz = t->speed_hz;
-	fsl_lpspi->config.chip_select = spi->chip_select;
+	if (fsl_lpspi->is_only_cs1)
+		fsl_lpspi->config.chip_select = 1;
+	else
+		fsl_lpspi->config.chip_select = spi->chip_select;
 
 	if (!fsl_lpspi->config.speed_hz)
 		fsl_lpspi->config.speed_hz = spi->max_speed_hz;
@@ -835,6 +838,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	fsl_lpspi = spi_controller_get_devdata(controller);
 	fsl_lpspi->dev = &pdev->dev;
 	fsl_lpspi->is_slave = is_slave;
+	fsl_lpspi->is_only_cs1 = of_property_read_bool((&pdev->dev)->of_node,
+						"fsl,spi-only-use-cs1-sel");
 
 	controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
 	controller->transfer_one = fsl_lpspi_transfer_one;
Signature · 1 line
2.17.1