Support for RNGB on i.MX6 ULL
Subsystems (4)
PATCH 1/1 Support for RNGB on i.MX6 ULL
This small series adds support for the Random Number Generator on the i.MX6 ULL SoC.
PATCH 1/3 ARM: dts: imx6ull: Add rngb node
The RNGB block on 6ull has no major differences, but it has no switchable clock.
--- arch/arm/boot/dts/imx6ull.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/boot/dts/imx6ull.dtsi +6 -0
@@ -68,6 +68,12 @@ dcp: crypto@2280000 { clock-names = "dcp"; }; + rngb: rng@2284000 { + compatible = "fsl,imx6ull-dcp", "fsl,imx25-rngb"; + reg = <0x02284000 0x4000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + iomuxc_snvs: iomuxc-snvs@2290000 { compatible = "fsl,imx6ull-iomuxc-snvs"; reg = <0x02290000 0x4000>;
Signature · 8 lines
Christian Eggers Embedded software developer Arnold & Richter Cine Technik GmbH & Co. Betriebs KG Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
Fabio Estevam
reviewerRe: [PATCH 1/3] ARM: dts: imx6ull: Add rngb node
Hi Christian,
Quoted 3 lines · Christian Eggers
The RNGB block on 6ull has no major differences, but it has no switchable clock.
Horia has already sent a patch series that adds imx6ull rngb support:
https://lkml.org/lkml/2020/7/23/173
PATCH 1/1 hwrng: imx-rngc - setup default RNG quality
When hw_random device's quality is non-zero, it will automatically fill the kernel's entropy pool at boot. For this purpose, one conservative quality value is being picked up as the default value.
--- drivers/char/hw_random/imx-rngc.c | 1 + 1 file changed, 1 insertion(+)
drivers/char/hw_random/imx-rngc.c +1 -0
@@ -285,6 +285,7 @@ static int imx_rngc_probe(struct platform_device *pdev) rngc->rng.init = imx_rngc_init; rngc->rng.read = imx_rngc_read; rngc->rng.cleanup = imx_rngc_cleanup; + rngc->rng.quality =900 ; rngc->dev = &pdev->dev;platform_set_drvdata (pdev, rngc);
Quoted 2 lines · On Mon, Jul 27, 2020 Fabian Estevam wrote:
Horia has already sent a patch series that adds imx6ull rngb support:
https://lkml.org/lkml/2020/7/23/173
That happens when patches are sent upstream one year after writing....
Can you please add the third patch of the series?
regards
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
Re: [PATCH] hwrng: imx-rngc - setup default RNG quality
Hi Christian,
Quoted 3 lines · Christian Eggers
When
hw_randomdevice's quality is non-zero, it will automatically fill the kernel's entropy pool at boot. For this purpose, one conservative quality value is being picked up as the default value.
IMHO your value is not conservative enough and the commit message should explain why we should use 900. Unfortunately I had not enough time to send my patch addressing this. However please check my commit message why 900 is not good:
8<------------------------------------------------------------------------ From 9f047eee5e4ce8353c9b764a47e7f584b2013347 Mon Sep 17 00:00:00 2001
From: Marco Felsch <[email protected]>
Date: Thu, 7 May 2020 12:01:28 +0200
Subject: [PATCH] hwrng: imx-rngc - add quality to use it as kernel entropy
pool
The RM describes the RNGB as follow:
8<---------------------------------------------------------------- The RNGB uses the True Random Number Generator (TRNG) and a Pseudo-Random Number Generator (PRNG) to achieve a true randomness and cryptographic strength. 8<----------------------------------------------------------------
The RNGB has 3 operation modes: self-test, seed-generation and the final 'random number generation' mode. Befor we can retrieve random numbers from the RNGB we need to generate the seed pool:
8<---------------------------------------------------------------- During the seed generation, the RNGB adds the entropy generated in the TRNG to the 256-bit XKEY register. The PRNG algorithm executes 20.000 entropy samples from the TRNG to create an initial seed for the random number generation. 8<----------------------------------------------------------------
The RNGB can generate 2^20 words (4byte) of 'random' data after the seed pool was initialized. The pool needs to be reseeded if more words are required. The reseeding is done automatically since commit 3acd9ea9331c ("hwrng: imx-rngc - use automatic seeding").
We can't retrieve the TRNG values directly so we need a other way to get the quality level. We know that the PRNG uses 20.000 entropy samples from the TRNG to generate 2^20 words (1MiB) and the quality level is defined as (in bits of entropy per 1024 bits of input). So the quality level can be calculated by:
20.000 * 1024
------------- = ~ 19.5
2^20
--- drivers/char/hw_random/imx-rngc.c | 1 + 1 file changed, 1 insertion(+)
drivers/char/hw_random/imx-rngc.c +1 -0
@@ -285,6 +285,7 @@ static int imx_rngc_probe(struct platform_device *pdev) rngc->rng.init = imx_rngc_init; rngc->rng.read = imx_rngc_read; rngc->rng.cleanup = imx_rngc_cleanup; + rngc->rng.quality =19 ; rngc->dev = &pdev->dev;platform_set_drvdata (pdev, rngc);
Re: [PATCH] hwrng: imx-rngc - setup default RNG quality
Hi Marco,
Quoted 11 lines · Marco Felsch
Hi Christian,
Quoted 3 lines · Christian Eggers
When
hw_randomdevice's quality is non-zero, it will automatically fill the kernel's entropy pool at boot. For this purpose, one conservative quality value is being picked up as the default value.IMHO your value is not conservative enough and the commit message should explain why we should use 900. Unfortunately I had not enough time to send my patch addressing this. However please check my commit message why 900 is not good:
ok, you caught me. I found the value of 900 in several other drivers and simply took it. Even parts of my commit message were simply copied...
As I have no real idea about determining the right quality, I will leave this task for you :-)
Thanks
Christian
PATCH 2/3 hwrng: imx-rngc - make clock optional
In reply to Christian EggersOn i.MX6 ULL the RNGB has no switchable clock.
--- drivers/char/hw_random/imx-rngc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/hw_random/imx-rngc.c +1 -1
@@ -245,7 +245,7 @@ static int imx_rngc_probe(struct platform_device *pdev)if (IS_ERR (rngc->base))return PTR_ERR (rngc->base); - rngc->clk =devm_clk_get (&pdev->dev,NULL ); + rngc->clk =devm_clk_get_optional (&pdev->dev,NULL );if (IS_ERR (rngc->clk)) {dev_err (&pdev->dev,"Can not get rng_clk\n" );return PTR_ERR (rngc->clk);
Signature · 8 lines
Christian Eggers Embedded software developer Arnold & Richter Cine Technik GmbH & Co. Betriebs KG Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
PATCH 3/3 hwrng: imx-rngc - setup default RNG quality
In reply to Christian EggersWhen hw_random device's quality is non-zero, it will automatically fill the kernel's entropy pool at boot. For this purpose, one conservative quality value is being picked up as the default value.
--- drivers/char/hw_random/imx-rngc.c | 1 + 1 file changed, 1 insertion(+)
drivers/char/hw_random/imx-rngc.c +1 -0
@@ -285,6 +285,7 @@ static int imx_rngc_probe(struct platform_device *pdev) rngc->rng.init = imx_rngc_init; rngc->rng.read = imx_rngc_read; rngc->rng.cleanup = imx_rngc_cleanup; + rngc->rng.quality =900 ; rngc->dev = &pdev->dev;platform_set_drvdata (pdev, rngc);
Signature · 8 lines
Christian Eggers Embedded software developer Arnold & Richter Cine Technik GmbH & Co. Betriebs KG Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler