Skip to contentSkip to conversation

net: lan78xx: fix NULL deref and memory leak

PATCH In review Johan Hovold 2 participants 5 messages Jul 28, 2020

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

cover net: lan78xx: fix NULL deref and memory leak

The first two patches fix a NULL-pointer dereference at probe that can be triggered by a malicious device and a small transfer-buffer memory leak, respectively.

For another subsystem I would have marked them:

	Cc: [email protected]	# 4.3

The third one replaces the driver's current broken endpoint lookup helper, which could end up accepting incomplete interfaces and whose results weren't even useeren
Johan

Johan Hovold (3):
net: lan78xx: add missing endpoint sanity check
net: lan78xx: fix transfer-buffer memory leak
net: lan78xx: replace bogus endpoint lookup

 drivers/net/usb/lan78xx.c | 113 +++++++++++---------------------------
 1 file changed, 31 insertions(+), 82 deletions(-)
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/3 net: lan78xx: add missing endpoint sanity check

Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints.

Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint.

Fixes 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
---
 drivers/net/usb/lan78xx.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/usb/lan78xx.c +5 -0
index eccbf4cd7149..d7162690e3f3 100644
@@ -3759,6 +3759,11 @@ static int lan78xx_probe(struct usb_interface *intf,
 	netdev->max_mtu = MAX_SINGLE_PACKET_SIZE;
 	netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);
 
+	if (intf->cur_altsetting->desc.bNumEndpoints < 3) {
+		ret = -ENODEV;
+		goto out3;
+	}
+
 	dev->ep_blkin = (intf->cur_altsetting)->endpoint + 0;
 	dev->ep_blkout = (intf->cur_altsetting)->endpoint + 1;
 	dev->ep_intr = (intf->cur_altsetting)->endpoint + 2;
Signature · 1 line
2.26.2
#2 lore raw

PATCH 2/3 net: lan78xx: fix transfer-buffer memory leak

In reply to Johan Hovold

The interrupt URB transfer-buffer was never freed on disconnect or after probe errors.

Fixes 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
---
 drivers/net/usb/lan78xx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/usb/lan78xx.c +1 -0
index d7162690e3f3..ee062b27cfa7 100644
@@ -3788,6 +3788,7 @@ static int lan78xx_probe(struct usb_interface *intf,
 			usb_fill_int_urb(dev->urb_intr, dev->udev,
 					 dev->pipe_intr, buf, maxp,
 					 intr_complete, dev, period);
+			dev->urb_intr->transfer_flags |= URB_FREE_BUFFER;
 		}
 	}
 
Signature · 1 line
2.26.2
#3 lore raw

PATCH 3/3 net: lan78xx: replace bogus endpoint lookup

In reply to Johan Hovold

Drop the bogus endpoint-lookup helper which could end up accepting interfaces based on endpoints belonging to unrelated altsettings.

Note that the returned bulk pipes and interrupt endpoint descriptor were never actually used. Instead the bulk-endpoint numbers are hardcoded to 1 and 2 (matching the specification), while the interrupt- endpoint descriptor was assumed to be the third descriptor created by USB core.

Try to bring some order to this by dropping the bogus lookup helper and adding the missing endpoint sanity checks while keeping the interrupt- descriptor assumption for now.

---
 drivers/net/usb/lan78xx.c | 117 ++++++++++----------------------------
 1 file changed, 30 insertions(+), 87 deletions(-)
drivers/net/usb/lan78xx.c +30 -87
index ee062b27cfa7..442507f25aad 100644
@@ -377,10 +377,6 @@ struct lan78xx_net {
 	struct tasklet_struct	bh;
 	struct delayed_work	wq;
 
-	struct usb_host_endpoint *ep_blkin;
-	struct usb_host_endpoint *ep_blkout;
-	struct usb_host_endpoint *ep_intr;
-
 	int			msg_enable;
 
 	struct urb		*urb_intr;
@@ -2860,78 +2856,12 @@ lan78xx_start_xmit(struct sk_buff *skb, struct net_device *net)
 	return NETDEV_TX_OK;
 }
 
-static int
-lan78xx_get_endpoints(struct lan78xx_net *dev, struct usb_interface *intf)
-{
-	int tmp;
-	struct usb_host_interface *alt = NULL;
-	struct usb_host_endpoint *in = NULL, *out = NULL;
-	struct usb_host_endpoint *status = NULL;
-
-	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
-		unsigned ep;
-
-		in = NULL;
-		out = NULL;
-		status = NULL;
-		alt = intf->altsetting + tmp;
-
-		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
-			struct usb_host_endpoint *e;
-			int intr = 0;
-
-			e = alt->endpoint + ep;
-			switch (e->desc.bmAttributes) {
-			case USB_ENDPOINT_XFER_INT:
-				if (!usb_endpoint_dir_in(&e->desc))
-					continue;
-				intr = 1;
-				/* FALLTHROUGH */
-			case USB_ENDPOINT_XFER_BULK:
-				break;
-			default:
-				continue;
-			}
-			if (usb_endpoint_dir_in(&e->desc)) {
-				if (!intr && !in)
-					in = e;
-				else if (intr && !status)
-					status = e;
-			} else {
-				if (!out)
-					out = e;
-			}
-		}
-		if (in && out)
-			break;
-	}
-	if (!alt || !in || !out)
-		return -EINVAL;
-
-	dev->pipe_in = usb_rcvbulkpipe(dev->udev,
-				       in->desc.bEndpointAddress &
-				       USB_ENDPOINT_NUMBER_MASK);
-	dev->pipe_out = usb_sndbulkpipe(dev->udev,
-					out->desc.bEndpointAddress &
-					USB_ENDPOINT_NUMBER_MASK);
-	dev->ep_intr = status;
-
-	return 0;
-}
-
 static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
 {
 	struct lan78xx_priv *pdata = NULL;
 	int ret;
 	int i;
 
-	ret = lan78xx_get_endpoints(dev, intf);
-	if (ret) {
-		netdev_warn(dev->net, "lan78xx_get_endpoints failed: %d\n",
-			    ret);
-		return ret;
-	}
-
 	dev->data[0] = (unsigned long)kzalloc(sizeof(*pdata), GFP_KERNEL);
 
 	pdata = (struct lan78xx_priv *)(dev->data[0]);
@@ -3700,6 +3630,7 @@ static void lan78xx_stat_monitor(struct timer_list *t)
 static int lan78xx_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
+	struct usb_host_endpoint *ep_blkin, *ep_blkout, *ep_intr;
 	struct lan78xx_net *dev;
 	struct net_device *netdev;
 	struct usb_device *udev;
@@ -3748,6 +3679,34 @@ static int lan78xx_probe(struct usb_interface *intf,
 
 	mutex_init(&dev->stats.access_lock);
 
+	if (intf->cur_altsetting->desc.bNumEndpoints < 3) {
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	dev->pipe_in = usb_rcvbulkpipe(udev, BULK_IN_PIPE);
+	ep_blkin = usb_pipe_endpoint(udev, dev->pipe_in);
+	if (!ep_blkin || !usb_endpoint_is_bulk_in(&ep_blkin->desc)) {
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	dev->pipe_out = usb_sndbulkpipe(udev, BULK_OUT_PIPE);
+	ep_blkout = usb_pipe_endpoint(udev, dev->pipe_out);
+	if (!ep_blkout || !usb_endpoint_is_bulk_out(&ep_blkout->desc)) {
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	ep_intr = &intf->cur_altsetting->endpoint[2];
+	if (!usb_endpoint_is_int_in(&ep_intr->desc)) {
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	dev->pipe_intr = usb_rcvintpipe(dev->udev,
+					usb_endpoint_num(&ep_intr->desc));
+
 	ret = lan78xx_bind(dev, intf);
 	if (ret < 0)
 		goto out2;
@@ -3759,23 +3718,7 @@ static int lan78xx_probe(struct usb_interface *intf,
 	netdev->max_mtu = MAX_SINGLE_PACKET_SIZE;
 	netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);
 
-	if (intf->cur_altsetting->desc.bNumEndpoints < 3) {
-		ret = -ENODEV;
-		goto out3;
-	}
-
-	dev->ep_blkin = (intf->cur_altsetting)->endpoint + 0;
-	dev->ep_blkout = (intf->cur_altsetting)->endpoint + 1;
-	dev->ep_intr = (intf->cur_altsetting)->endpoint + 2;
-
-	dev->pipe_in = usb_rcvbulkpipe(udev, BULK_IN_PIPE);
-	dev->pipe_out = usb_sndbulkpipe(udev, BULK_OUT_PIPE);
-
-	dev->pipe_intr = usb_rcvintpipe(dev->udev,
-					dev->ep_intr->desc.bEndpointAddress &
-					USB_ENDPOINT_NUMBER_MASK);
-	period = dev->ep_intr->desc.bInterval;
-
+	period = ep_intr->desc.bInterval;
 	maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0);
 	buf = kmalloc(maxp, GFP_KERNEL);
 	if (buf) {
Signature · 1 line
2.26.2
maintainer
#4 lore raw
In reply to Johan Hovold

From: Johan Hovold <[email protected]>
Date: Tue, 28 Jul 2020 14:10:28 +0200

Quoted 11 lines

The first two patches fix a NULL-pointer dereference at probe that can be triggered by a malicious device and a small transfer-buffer memory leak, respectively.

For another subsystem I would have marked them:

	Cc: [email protected]	# 4.3

The third one replaces the driver's current broken endpoint lookup helper, which could end up accepting incomplete interfaces and whose results weren't even useeren

Series applied and queued up for -stable.