Skip to contentSkip to conversation

dt-bindings: Add vendor prefix for Powertip

PATCH In review Marek Vasut 2 participants 4 messages Jul 28, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/3 dt-bindings: Add vendor prefix for Powertip

The Powertip Tech. Corp. is an LCD panel manufacturer.

To: [email protected]
Cc: Eric Anholt <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: [email protected]
---
V2: No change

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index f3d847832fdc..5b1343a8d198 100644
@@ -830,6 +830,8 @@ patternProperties:
     description: Poslab Technology Co., Ltd.
   "^pov,.*":
     description: Point of View International B.V.
+  "^powertip,.*":
+    description: Powertip Tech. Corp.
   "^powervr,.*":
     description: PowerVR (deprecated, use img)
   "^primux,.*":
Signature · 1 line
2.27.0
#1 lore raw

PATCH v2 2/3 dt-bindings: Add DT bindings for Powertip PH800480T013

Add DT bindings for Powertip PH800480T013 800x480 parallel LCD, this one is used in the Raspberry Pi 7" touchscreen display unit.

To: [email protected]
Cc: Eric Anholt <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: [email protected]
---
V2: Add the bindings to panel-simple.yaml

---
 .../devicetree/bindings/display/panel/panel-simple.yaml         | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +2 -0
index 6deeeed59e59..5a0af2b80aba 100644
@@ -219,6 +219,8 @@ properties:
       - osddisplays,osd070t1718-19ts
         # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2045-53ts
+        # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+      - powertip,ph800480t013-idf02
         # QiaoDian XianShi Corporation 4"3 TFT LCD panel
       - qiaodian,qd43003c0-40
         # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
Signature · 1 line
2.27.0
#2 lore raw

PATCH v2 3/3 drm/panel: simple: Add DT bindings for Powertip PH800480T013

In reply to Marek Vasut

Add support for Powertip PH800480T013 800x480 parallel LCD, this one is used in the Raspberry Pi 7" touchscreen display unit.

To: [email protected]
Cc: Eric Anholt <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: [email protected]
---
V2: Add bus_flags and connector_type

---
 drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +28 -0
index cb6550d37e85..298e3a26d9ee 100644
@@ -3000,6 +3000,31 @@ static const struct panel_desc pda_91_00156_a0  = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
+static const struct drm_display_mode powertip_ph800480t013_idf02_mode = {
+	.clock = 24750,
+	.hdisplay = 800,
+	.hsync_start = 800 + 54,
+	.hsync_end = 800 + 54 + 2,
+	.htotal = 800 + 54 + 2 + 44,
+	.vdisplay = 480,
+	.vsync_start = 480 + 49,
+	.vsync_end = 480 + 49 + 2,
+	.vtotal = 480 + 49 + 2 + 22,
+};
+
+static const struct panel_desc powertip_ph800480t013_idf02  = {
+	.modes = &powertip_ph800480t013_idf02_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH |
+		     DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
 
 static const struct drm_display_mode qd43003c0_40_mode = {
 	.clock = 9000,
@@ -4012,6 +4037,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "pda,91-00156-a0",
 		.data = &pda_91_00156_a0,
+	}, {
+		.compatible = "powertip,ph800480t013-idf02",
+		.data = &powertip_ph800480t013_idf02,
 	}, {
 		.compatible = "qiaodian,qd43003c0-40",
 		.data = &qd43003c0_40,
Signature · 1 line
2.27.0
#3 lore raw

Re: [PATCH V2 3/3] drm/panel: simple: Add DT bindings for Powertip PH800480T013

Quoted 11 lines · Marek Vasut

Add support for Powertip PH800480T013 800x480 parallel LCD, this one is used in the Raspberry Pi 7" touchscreen display unit.

To: [email protected]
Cc: Eric Anholt <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: [email protected]
---
V2: Add bus_flags and connector_type

Hi Marek.

Applied the 3 patches to drm-misc-next.
Fixed subject while applying this patch.

Sam

Quoted 52 lines
---
 drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +28 -0
index cb6550d37e85..298e3a26d9ee 100644
@@ -3000,6 +3000,31 @@ static const struct panel_desc pda_91_00156_a0  = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
+static const struct drm_display_mode powertip_ph800480t013_idf02_mode = {
+	.clock = 24750,
+	.hdisplay = 800,
+	.hsync_start = 800 + 54,
+	.hsync_end = 800 + 54 + 2,
+	.htotal = 800 + 54 + 2 + 44,
+	.vdisplay = 480,
+	.vsync_start = 480 + 49,
+	.vsync_end = 480 + 49 + 2,
+	.vtotal = 480 + 49 + 2 + 22,
+};
+
+static const struct panel_desc powertip_ph800480t013_idf02  = {
+	.modes = &powertip_ph800480t013_idf02_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH |
+		     DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
 
 static const struct drm_display_mode qd43003c0_40_mode = {
 	.clock = 9000,
@@ -4012,6 +4037,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "pda,91-00156-a0",
 		.data = &pda_91_00156_a0,
+	}, {
+		.compatible = "powertip,ph800480t013-idf02",
+		.data = &powertip_ph800480t013_idf02,
 	}, {
 		.compatible = "qiaodian,qd43003c0-40",
 		.data = &qd43003c0_40,
Signature · 1 line
2.27.0