Skip to contentSkip to conversation

powerpc/powernv/pci: Fix build of pci-ioda.o

PATCH In review Gustavo Romero 3 participants 3 messages Jul 28, 2020 – Jul 29, 2020 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc/powernv/pci: Fix build of pci-ioda.o

Currently pnv_ioda_setup_bus_dma() is outside of a CONFIG_IOMMU_API guard and if CONFIG_IOMMU_API=n the build can fail if the compiler sets -Werror=unused-function, because pnv_ioda_setup_bus_dma() is only used in functions guarded by a CONFIG_IOMMU_API guard.

That issue can be easily reproduced using the skiroot_defconfig. For other configs, like powernv_defconfig, that issue is hidden by the fact that if CONFIG_IOMMU_SUPPORT is enabled plus other common IOMMU options, like CONFIG_OF_IOMMU, by default CONFIG_IOMMU_API is enabled as well. Hence, for powernv_defconfig, it's necessary to set CONFIG_IOMMU_SUPPORT=n to make the build fail, because CONFIG_PCI=y and pci-ioda.c is included in the build, but since CONFIG_IOMMU_SUPPORT=n the CONFIG_IOMMU_API is disabled, breaking the build.

This commit fixes that build issue by moving the pnv_ioda_setup_bus_dma() inside a CONFIG_IOMMU_API guard, so when CONFIG_IOMMU_API is disabled that function is not defined.

---
 arch/powerpc/platforms/powernv/pci-ioda.c | 26 +++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)
arch/powerpc/platforms/powernv/pci-ioda.c +13 -13
index 73a63efcf855..743d840712da 100644
@@ -1885,19 +1885,6 @@ static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev,
 	return false;
 }
 
-static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		set_iommu_table_base(&dev->dev, pe->table_group.tables[0]);
-		dev->dev.archdata.dma_offset = pe->tce_bypass_base;
-
-		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
-			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
-	}
-}
-
 static inline __be64 __iomem *pnv_ioda_get_inval_reg(struct pnv_phb *phb,
 						     bool real_mode)
 {
@@ -2501,6 +2488,19 @@ static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group,
 #endif
 
 #ifdef CONFIG_IOMMU_API
+static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		set_iommu_table_base(&dev->dev, pe->table_group.tables[0]);
+		dev->dev.archdata.dma_offset = pe->tce_bypass_base;
+
+		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
+			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+	}
+}
+
 unsigned long pnv_pci_ioda2_get_table_size(__u32 page_shift,
 		__u64 window_size, __u32 levels)
 {
Signature · 1 line
2.17.1
#1 lore raw
Quoted 15 lines · Gustavo Romero

Currently pnv_ioda_setup_bus_dma() is outside of a CONFIG_IOMMU_API guard and if CONFIG_IOMMU_API=n the build can fail if the compiler sets -Werror=unused-function, because pnv_ioda_setup_bus_dma() is only used in functions guarded by a CONFIG_IOMMU_API guard.

That issue can be easily reproduced using the skiroot_defconfig. For other configs, like powernv_defconfig, that issue is hidden by the fact that if CONFIG_IOMMU_SUPPORT is enabled plus other common IOMMU options, like CONFIG_OF_IOMMU, by default CONFIG_IOMMU_API is enabled as well. Hence, for powernv_defconfig, it's necessary to set CONFIG_IOMMU_SUPPORT=n to make the build fail, because CONFIG_PCI=y and pci-ioda.c is included in the build, but since CONFIG_IOMMU_SUPPORT=n the CONFIG_IOMMU_API is disabled, breaking the build.

Quoted 3 lines

This commit fixes that build issue by moving the pnv_ioda_setup_bus_dma() inside a CONFIG_IOMMU_API guard, so when CONFIG_IOMMU_API is disabled that function is not defined.

I think a fix for this is already in -next.

Reviewed-by Alexey Kardashevskiy
#2 lore raw

Hi Oliver,

Quoted 16 lines · Oliver O'Halloran
Quoted 15 lines · Gustavo Romero

Currently pnv_ioda_setup_bus_dma() is outside of a CONFIG_IOMMU_API guard and if CONFIG_IOMMU_API=n the build can fail if the compiler sets -Werror=unused-function, because pnv_ioda_setup_bus_dma() is only used in functions guarded by a CONFIG_IOMMU_API guard.

That issue can be easily reproduced using the skiroot_defconfig. For other configs, like powernv_defconfig, that issue is hidden by the fact that if CONFIG_IOMMU_SUPPORT is enabled plus other common IOMMU options, like CONFIG_OF_IOMMU, by default CONFIG_IOMMU_API is enabled as well. Hence, for powernv_defconfig, it's necessary to set CONFIG_IOMMU_SUPPORT=n to make the build fail, because CONFIG_PCI=y and pci-ioda.c is included in the build, but since CONFIG_IOMMU_SUPPORT=n the CONFIG_IOMMU_API is disabled, breaking the build.

Quoted 5 lines
Quoted 3 lines

This commit fixes that build issue by moving the pnv_ioda_setup_bus_dma() inside a CONFIG_IOMMU_API guard, so when CONFIG_IOMMU_API is disabled that function is not defined.

I think a fix for this is already in -next.

Indeed.

For the records, it's fixed in -next by:

commit e3417faec526cbf97773dca691dcd743f5bfeb64

Author: Oliver O'Halloran <[email protected]>
Date:   Sun Jul 5 23:35:57 2020 +1000

powerpc/powernv: Move pnv_ioda_setup_bus_dma under CONFIG_IOMMU_API

pnv_ioda_setup_bus_dma() is only used when a passed through PE is returned to the host. If the kernel is built without IOMMU support this is dead code. Move it under the #ifdef with the rest of the IOMMU API support.

Thanks.

Cheers,
Gustavo