Skip to contentSkip to conversation

IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE

PATCH Applied Mike Marciniszyn 3 participants 3 messages Jul 28, 2020 – Jul 29, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE

The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385.

The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below:

rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c

	qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385

rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1

The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0.

The next call to rvt_get_rwqe with the decremented count:

rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c

	qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384

rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1

Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count.

Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state.

In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory.

Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline.

Fixes f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Cc <[email protected]> # 5.4.x
---
 drivers/infiniband/sw/rdmavt/qp.c |   33 ++++-----------------------------
 drivers/infiniband/sw/rdmavt/rc.c |    4 +---
 include/rdma/rdmavt_qp.h          |   19 +++++++++++++++++++
 3 files changed, 24 insertions(+), 32 deletions(-)
drivers/infiniband/sw/rdmavt/qp.c +4 -29
index 7db35dd..332a8ba 100644
@@ -901,8 +901,6 @@ static void rvt_init_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
 	qp->s_tail_ack_queue = 0;
 	qp->s_acked_ack_queue = 0;
 	qp->s_num_rd_atomic = 0;
-	if (qp->r_rq.kwq)
-		qp->r_rq.kwq->count = qp->r_rq.size;
 	qp->r_sge.num_sge = 0;
 	atomic_set(&qp->s_reserved_used, 0);
 }
@@ -2367,31 +2365,6 @@ static int init_sge(struct rvt_qp *qp, struct rvt_rwqe *wqe)
 }
 
 /**
- * get_count - count numbers of request work queue entries
- * in circular buffer
- * @rq: data structure for request queue entry
- * @tail: tail indices of the circular buffer
- * @head: head indices of the circular buffer
- *
- * Return - total number of entries in the circular buffer
- */
-static u32 get_count(struct rvt_rq *rq, u32 tail, u32 head)
-{
-	u32 count;
-
-	count = head;
-
-	if (count >= rq->size)
-		count = 0;
-	if (count < tail)
-		count += rq->size - tail;
-	else
-		count -= tail;
-
-	return count;
-}
-
-/**
  * get_rvt_head - get head indices of the circular buffer
  * @rq: data structure for request queue entry
  * @ip: the QP
@@ -2465,7 +2438,7 @@ int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only)
 
 	if (kwq->count < RVT_RWQ_COUNT_THRESHOLD) {
 		head = get_rvt_head(rq, ip);
-		kwq->count = get_count(rq, tail, head);
+		kwq->count = rvt_get_rq_count(rq, head, tail);
 	}
 	if (unlikely(kwq->count == 0)) {
 		ret = 0;
@@ -2500,7 +2473,9 @@ int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only)
 		 * the number of remaining WQEs.
 		 */
 		if (kwq->count < srq->limit) {
-			kwq->count = get_count(rq, tail, get_rvt_head(rq, ip));
+			kwq->count =
+				rvt_get_rq_count(rq,
+						 get_rvt_head(rq, ip), tail);
 			if (kwq->count < srq->limit) {
 				struct ib_event ev;
 
drivers/infiniband/sw/rdmavt/rc.c +1 -3
index 977906c..c58735f 100644
@@ -127,9 +127,7 @@ __be32 rvt_compute_aeth(struct rvt_qp *qp)
 			 * not atomic, which is OK, since the fuzziness is
 			 * resolved as further ACKs go out.
 			 */
-			credits = head - tail;
-			if ((int)credits < 0)
-				credits += qp->r_rq.size;
+			credits = rvt_get_rq_count(&qp->r_rq, head, tail);
 		}
 		/*
 		 * Binary search the credit table to find the code to
include/rdma/rdmavt_qp.h +19 -0
index c4369a6..2f1fc23 100644
@@ -305,6 +305,25 @@ struct rvt_rq {
 	spinlock_t lock ____cacheline_aligned_in_smp;
 };
 
+/**
+ * rvt_get_rq_count - count numbers of request work queue entries
+ * in circular buffer
+ * @rq: data structure for request queue entry
+ * @head: head indices of the circular buffer
+ * @tail: tail indices of the circular buffer
+ *
+ * Return - total number of entries in the Receive Queue
+ */
+
+static inline u32 rvt_get_rq_count(struct rvt_rq *rq, u32 head, u32 tail)
+{
+	u32 count = head - tail;
+
+	if ((s32)count < 0)
+		count += rq->size;
+	return count;
+}
+
 /*
  * This structure holds the information that the send tasklet needs
  * to send a RDMA read response or atomic operation.
Tested-by on v1 1/1
#1 lore raw
Quoted 26 lines · Mike Marciniszyn

The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385.

The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below:

rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c

	qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385

rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1

The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0.

The next call to rvt_get_rwqe with the decremented count:

rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c

	qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384

rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1

Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count.

Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state.

Quoted 8 lines

In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory.

Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline.

Fixes f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")

Confirmed this patch works for me. Thanks

maintainer Applied
#2 lore raw
In reply to Mike Marciniszyn
Quoted 39 lines · Mike Marciniszyn

The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385.

The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below:

rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c

	qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385

rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1

The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0.

The next call to rvt_get_rwqe with the decremented count:

rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c

	qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384

rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1

Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count.

Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state.

In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory.

Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline.

Fixes f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Cc <[email protected]> # 5.4.x
Quoted 5 lines
---
 drivers/infiniband/sw/rdmavt/qp.c |   33 ++++-----------------------------
 drivers/infiniband/sw/rdmavt/rc.c |    4 +---
 include/rdma/rdmavt_qp.h          |   19 +++++++++++++++++++
 3 files changed, 24 insertions(+), 32 deletions(-)

Applied to for-rc, thanks

Jason