use dt and UCLASS_IRQ/SYSCON to get gic details
v4 cover use dt and UCLASS_IRQ/SYSCON to get gic details
Use device tree and driver class (UCLASS_IRQ and UCLASS_SYSCON) to get gic details like GICD, GICR base address, max number of redistributors and git lpi address.
Changes from v3:
-Address review comments from Simon,
Correct the data type of variables
Changes from v2:
-Address review comments from Tom Rini,
Fix build errors messages.
Changes from v1:
-Address review comments from Tom Rini,
Fix build warning messages.
Rayagonda Kokatanur (2):
arch: arm: use dt and UCLASS_IRQ to get gic details
arch: arm: use dt and UCLASS_SYSCON to get gic lpi details
arch/arm/Kconfig | 2 + arch/arm/cpu/armv8/fsl-layerscape/soc.c | 28 +---- arch/arm/include/asm/gic-v3.h | 4 +- arch/arm/lib/gic-v3-its.c | 136 +++++++++++++++++++++--- 4 files changed, 127 insertions(+), 43 deletions(-)
Signature · 1 line
2.17.1
PATCH v4 1/2 arch: arm: use dt and UCLASS_IRQ to get gic details
Use device tree and UCLASS_IRQ driver to get following Generic Interrupt Controller (GIC) details,
-GIC Distributor interface (GICD) base address and -GIC Redistributors (GICR) base address.
---
Changes from v3:
-Address review comments from Simon,
Correct the data type of variables
Changes from v1:
-Address review comments from Tom Rini,
Fix build warning messages.
arch/arm/lib/gic-v3-its.c | 73 +++++++++++++++++++++++++++++++++++---- 1 file changed, 66 insertions(+), 7 deletions(-)
arch/arm/lib/gic-v3-its.c +66 -7
@@ -3,6 +3,7 @@* Copyright 2019 Broadcom. */ #include <common.h> +#include <dm.h> #include <asm/gic.h> #include <asm/gic-v3.h> #include <asm/io.h>
@@ -15,6 +16,48 @@ static u32 lpi_id_bits;#define LPI_PROPBASE_SZ ALIGN(BIT(LPI_NRBITS), SZ_64K)#define LPI_PENDBASE_SZ ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K) +/* +* gic_v3_its_priv - gic details +* +* @gicd_base: gicd base address +* @gicr_base: gicr base address +*/ +struct gic_v3_its_priv { +ulong gicd_base; +ulong gicr_base; +}; + +static int gic_v3_its_get_gic_addr (struct gic_v3_its_priv *priv) +{ +struct udevice *dev; +fdt_addr_t addr; +int ret; + + ret =uclass_get_device_by_driver (UCLASS_IRQ , +DM_GET_DRIVER (arm_gic_v3_its), &dev); +if (ret) { +pr_err ("%s: failed to get %s irq device\n" , __func__, +DM_GET_DRIVER (arm_gic_v3_its)->name); +return ret; + } + + addr =dev_read_addr_index (dev,0 ); +if (addr ==FDT_ADDR_T_NONE ) { +pr_err ("%s: failed to get GICD address\n" , __func__); +return -EINVAL ; + } + priv->gicd_base = addr; + + addr =dev_read_addr_index (dev,1 ); +if (addr ==FDT_ADDR_T_NONE ) { +pr_err ("%s: failed to get GICR address\n" , __func__); +return -EINVAL ; + } + priv->gicr_base = addr; + +return 0 ; +} +/* * Program the GIC LPI configuration tables for all * the re-distributors and enable the LPI table
@@ -23,15 +66,18 @@ static u32 lpi_id_bits;*/ int gic_lpi_tables_init (u64 base,u32 num_redist) { +struct gic_v3_its_priv priv;u32 gicd_typer;u64 val;u64 tmp;int i;u64 redist_lpi_base; -u64 pend_base =GICR_BASE +GICR_PENDBASER ; +u64 pend_base; - gicd_typer =readl (GICD_BASE +GICD_TYPER ); +if (gic_v3_its_get_gic_addr (&priv)) +return -EINVAL ; + gicd_typer =readl ((uintptr_t )(priv.gicd_base +GICD_TYPER ));/* GIC support for Locality specific peripheral interrupts (LPI's) */ if (!(gicd_typer &GICD_TYPER_LPIS )) {pr_err ("GIC implementation does not support LPI's\n" );
@@ -46,7 +92,7 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)for (i =0 ; i < num_redist; i++) {u32 offset = i *GIC_REDISTRIBUTOR_OFFSET ; -if ((readl ((uintptr_t )(GICR_BASE + offset))) & +if ((readl ((uintptr_t )(priv.gicr_base + offset))) &GICR_CTLR_ENABLE_LPIS ) {pr_err ("Re-Distributor %d LPI is already enabled\n" , i);
@@ -64,19 +110,21 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)GICR_PROPBASER_RAWAWB | ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK)); -writeq (val, (GICR_BASE +GICR_PROPBASER )); - tmp =readl (GICR_BASE +GICR_PROPBASER ); +writeq (val, (uintptr_t )(priv.gicr_base +GICR_PROPBASER )); + tmp =readl ((uintptr_t )(priv.gicr_base +GICR_PROPBASER ));if ((tmp ^ val) &GICR_PROPBASER_SHAREABILITY_MASK ) {if (!(tmp &GICR_PROPBASER_SHAREABILITY_MASK )) { val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |GICR_PROPBASER_CACHEABILITY_MASK ); val |=GICR_PROPBASER_NC ; -writeq (val, (GICR_BASE +GICR_PROPBASER )); +writeq (val, + (uintptr_t )(priv.gicr_base +GICR_PROPBASER )); } } redist_lpi_base = base +LPI_PROPBASE_SZ ; + pend_base = priv.gicr_base +GICR_PENDBASER ;for (i =0 ; i < num_redist; i++) {u32 offset = i *GIC_REDISTRIBUTOR_OFFSET ;
@@ -94,9 +142,20 @@ int gic_lpi_tables_init(u64 base, u32 num_redist) }/* Enable LPI for the redistributor */ -writel (GICR_CTLR_ENABLE_LPIS , (uintptr_t )(GICR_BASE + offset)); +writel (GICR_CTLR_ENABLE_LPIS , + (uintptr_t )(priv.gicr_base + offset)); }return 0 ; } +static const struct udevice_id gic_v3_its_ids[] = { + { .compatible ="arm,gic-v3" }, + {} +}; + +U_BOOT_DRIVER (arm_gic_v3_its) = { + .name ="gic-v3" , + .id =UCLASS_IRQ , + .of_match = gic_v3_its_ids, +};
Signature · 1 line
2.17.1
PATCH v4 1/2 arch: arm: use dt and UCLASS_IRQ to get gic details
Quoted 8 lines · Rayagonda Kokatanur
Use device tree and
UCLASS_IRQdriver to get following Generic Interrupt Controller (GIC) details,(quoted diff) +0
-2-GIC Distributor interface (GICD) base address and -GIC Redistributors (GICR) base address.Signed-off-by Rayagonda Kokatanur <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/f809b6af/attachment.sig>
PATCH v4 1/2 arch: arm: use dt and UCLASS_IRQ to get gic details
In reply to Rayagonda KokatanurHi Rayagonda,
Quoted 8 lines · Rayagonda Kokatanur
Use device tree and
UCLASS_IRQdriver to get following Generic Interrupt Controller (GIC) details,(quoted diff) +0
-2-GIC Distributor interface (GICD) base address and -GIC Redistributors (GICR) base address.Signed-off-by Rayagonda Kokatanur <[email protected]>Reviewed-by Simon Glass <[email protected]>
How is this supposed to work on an ARM platform? I'm currently testing TOT on an NXP LX2160 platform and it fails with this bootup message:
Error binding driver 'gic-v3': -96
Some drivers failed to bind
Debugging revealed that UCLASS_IRQ is missing for this platform. The driver "irq-uclass.c" is only selectable for X86 & SANDBOX:
config IRQ
bool "Intel Interrupt controller"
depends on X86 || SANDBOX
help
This enables support for Intel interrupt controllers, including ITSS. Some devices have extra features, such as Apollo Lake. The device has its own uclass since there are several operations involved.
This Kconfig help is also not correct any more, as the UCLASS_IRQ driver is not Intel specific (any more).
FWICT, it would be best to make CONFIG_IRQ selectable for all platforms and select it in the "config GIC_V3_ITS" definition, similar to how it done with REGMAP & SYSCON. And change the "config IRQ" help text above.
What do you think?
Thanks,
Stefan
Quoted 141 lines
---
Changes from v3:
-Address review comments from Simon,
Correct the data type of variablesChanges from v1:
-Address review comments from Tom Rini,
Fix build warning messages.arch/arm/lib/gic-v3-its.c | 73 +++++++++++++++++++++++++++++++++++---- 1 file changed, 66 insertions(+), 7 deletions(-)arch/arm/lib/gic-v3-its.c +56
-7@@ -3,6 +3,7 @@* Copyright 2019 Broadcom. */ #include <common.h> +#include <dm.h> #include <asm/gic.h> #include <asm/gic-v3.h> #include <asm/io.h> @@ -15,6 +16,48 @@ static u32 lpi_id_bits;#define LPI_PROPBASE_SZ ALIGN(BIT(LPI_NRBITS), SZ_64K)#define LPI_PENDBASE_SZ ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K) +/* +* gic_v3_its_priv - gic details +* +* @gicd_base: gicd base address +* @gicr_base: gicr base address +*/ +struct gic_v3_its_priv { +ulong gicd_base; +ulong gicr_base; +}; + +static int gic_v3_its_get_gic_addr (struct gic_v3_its_priv *priv) +{ +struct udevice *dev; +fdt_addr_t addr; +int ret; + + ret =uclass_get_device_by_driver (UCLASS_IRQ , +DM_GET_DRIVER (arm_gic_v3_its), &dev); +if (ret) { +pr_err ("%s: failed to get %s irq device\n" , __func__, +DM_GET_DRIVER (arm_gic_v3_its)->name); +return ret; + } + + addr =dev_read_addr_index (dev,0 ); +if (addr ==FDT_ADDR_T_NONE ) { +pr_err ("%s: failed to get GICD address\n" , __func__); +return -EINVAL ; + } + priv->gicd_base = addr; + + addr =dev_read_addr_index (dev,1 ); +if (addr ==FDT_ADDR_T_NONE ) { +pr_err ("%s: failed to get GICR address\n" , __func__); +return -EINVAL ; + } + priv->gicr_base = addr; + +return 0 ; +} +/* * Program the GIC LPI configuration tables for all * the re-distributors and enable the LPI table @@ -23,15 +66,18 @@ static u32 lpi_id_bits;*/ int gic_lpi_tables_init (u64 base,u32 num_redist) { +struct gic_v3_its_priv priv;u32 gicd_typer;u64 val;u64 tmp;int i;u64 redist_lpi_base; -u64 pend_base =GICR_BASE +GICR_PENDBASER ; +u64 pend_base; - gicd_typer =readl (GICD_BASE +GICD_TYPER ); +if (gic_v3_its_get_gic_addr (&priv)) +return -EINVAL ; + gicd_typer =readl ((uintptr_t )(priv.gicd_base +GICD_TYPER ));/* GIC support for Locality specific peripheral interrupts (LPI's) */ if (!(gicd_typer &GICD_TYPER_LPIS )) {pr_err ("GIC implementation does not support LPI's\n" );@@ -46,7 +92,7 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)for (i =0 ; i < num_redist; i++) {u32 offset = i *GIC_REDISTRIBUTOR_OFFSET ; -if ((readl ((uintptr_t )(GICR_BASE + offset))) & +if ((readl ((uintptr_t )(priv.gicr_base + offset))) &GICR_CTLR_ENABLE_LPIS ) {pr_err ("Re-Distributor %d LPI is already enabled\n" , i);@@ -64,19 +110,21 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)GICR_PROPBASER_RAWAWB | ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK)); -writeq (val, (GICR_BASE +GICR_PROPBASER )); - tmp =readl (GICR_BASE +GICR_PROPBASER ); +writeq (val, (uintptr_t )(priv.gicr_base +GICR_PROPBASER )); + tmp =readl ((uintptr_t )(priv.gicr_base +GICR_PROPBASER ));if ((tmp ^ val) &GICR_PROPBASER_SHAREABILITY_MASK ) {if (!(tmp &GICR_PROPBASER_SHAREABILITY_MASK )) { val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |GICR_PROPBASER_CACHEABILITY_MASK ); val |=GICR_PROPBASER_NC ; -writeq (val, (GICR_BASE +GICR_PROPBASER )); +writeq (val, + (uintptr_t )(priv.gicr_base +GICR_PROPBASER )); } } redist_lpi_base = base +LPI_PROPBASE_SZ ; + pend_base = priv.gicr_base +GICR_PENDBASER ;for (i =0 ; i < num_redist; i++) {u32 offset = i *GIC_REDISTRIBUTOR_OFFSET ;@@ -94,9 +142,20 @@ int gic_lpi_tables_init(u64 base, u32 num_redist) }/* Enable LPI for the redistributor */ -writel (GICR_CTLR_ENABLE_LPIS , (uintptr_t )(GICR_BASE + offset)); +writel (GICR_CTLR_ENABLE_LPIS , + (uintptr_t )(priv.gicr_base + offset)); }return 0 ; }
arch/arm/lib/gic-v3-its.c int gic_lpi_tables_init(u64 base, u32 num_redist) · line 161
Quoted 10 lines
arch/arm/lib/gic-v3-its.c +10
-0+static const struct udevice_id gic_v3_its_ids[] = { + { .compatible ="arm,gic-v3" }, + {} +}; + +U_BOOT_DRIVER (arm_gic_v3_its) = { + .name ="gic-v3" , + .id =UCLASS_IRQ , + .of_match = gic_v3_its_ids, +};
Viele Gr??e,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH v4 1/2 arch: arm: use dt and UCLASS_IRQ to get gic details
Hi Stefan,
Quoted 31 lines · Stefan Roese
Hi Rayagonda,
Quoted 8 lines · Rayagonda Kokatanur
Use device tree and
UCLASS_IRQdriver to get following Generic Interrupt Controller (GIC) details,(quoted diff) +0
-2-GIC Distributor interface (GICD) base address and -GIC Redistributors (GICR) base address.Signed-off-by Rayagonda Kokatanur <[email protected]>Reviewed-by Simon Glass <[email protected]>How is this supposed to work on an ARM platform? I'm currently testing TOT on an NXP LX2160 platform and it fails with this bootup message:
Error binding driver 'gic-v3': -96
Some drivers failed to bindDebugging revealed that
UCLASS_IRQis missing for this platform. The driver "irq-uclass.c" is only selectable for X86 & SANDBOX:config IRQ
bool "Intel Interrupt controller"
depends on X86 || SANDBOX
help
This enables support for Intel interrupt controllers, including ITSS. Some devices have extra features, such as Apollo Lake. The device has its own uclass since there are several operations involved.
Quoted 8 lines
This
Kconfighelp is also not correct any more, as theUCLASS_IRQdriver is not Intel specific (any more).FWICT, it would be best to make
CONFIG_IRQselectable for all platforms and select it in the "configGIC_V3_ITS" definition, similar to how it done with REGMAP & SYSCON. And change the "config IRQ" help text above.What do you think?
Sorry I missed your mail.
I am okay with your approach.
Also adding the following code at the end of "arch/arm/lib/gic-v3-its.c" file, will solve the issue.
I found that this piece of code is not required for the latest uboot hence I didn't add this as part of my patch.
UCLASS_DRIVER(irq) = {
.id = UCLASS_IRQ,
.name = "irq",
};
Best regards,
Rayagonda
Quoted 164 lines
Thanks,
StefanQuoted 141 lines
---
Changes from v3:
-Address review comments from Simon,
Correct the data type of variablesChanges from v1:
-Address review comments from Tom Rini,
Fix build warning messages.arch/arm/lib/gic-v3-its.c | 73 +++++++++++++++++++++++++++++++++++---- 1 file changed, 66 insertions(+), 7 deletions(-)arch/arm/lib/gic-v3-its.c +56
-7@@ -3,6 +3,7 @@* Copyright 2019 Broadcom. */ #include <common.h> +#include <dm.h> #include <asm/gic.h> #include <asm/gic-v3.h> #include <asm/io.h> @@ -15,6 +16,48 @@ static u32 lpi_id_bits;#define LPI_PROPBASE_SZ ALIGN(BIT(LPI_NRBITS), SZ_64K)#define LPI_PENDBASE_SZ ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K) +/* +* gic_v3_its_priv - gic details +* +* @gicd_base: gicd base address +* @gicr_base: gicr base address +*/ +struct gic_v3_its_priv { +ulong gicd_base; +ulong gicr_base; +}; + +static int gic_v3_its_get_gic_addr (struct gic_v3_its_priv *priv) +{ +struct udevice *dev; +fdt_addr_t addr; +int ret; + + ret =uclass_get_device_by_driver (UCLASS_IRQ , +DM_GET_DRIVER (arm_gic_v3_its), &dev); +if (ret) { +pr_err ("%s: failed to get %s irq device\n" , __func__, +DM_GET_DRIVER (arm_gic_v3_its)->name); +return ret; + } + + addr =dev_read_addr_index (dev,0 ); +if (addr ==FDT_ADDR_T_NONE ) { +pr_err ("%s: failed to get GICD address\n" , __func__); +return -EINVAL ; + } + priv->gicd_base = addr; + + addr =dev_read_addr_index (dev,1 ); +if (addr ==FDT_ADDR_T_NONE ) { +pr_err ("%s: failed to get GICR address\n" , __func__); +return -EINVAL ; + } + priv->gicr_base = addr; + +return 0 ; +} +/* * Program the GIC LPI configuration tables for all * the re-distributors and enable the LPI table @@ -23,15 +66,18 @@ static u32 lpi_id_bits;*/ int gic_lpi_tables_init (u64 base,u32 num_redist) { +struct gic_v3_its_priv priv;u32 gicd_typer;u64 val;u64 tmp;int i;u64 redist_lpi_base; -u64 pend_base =GICR_BASE +GICR_PENDBASER ; +u64 pend_base; - gicd_typer =readl (GICD_BASE +GICD_TYPER ); +if (gic_v3_its_get_gic_addr (&priv)) +return -EINVAL ; + gicd_typer =readl ((uintptr_t )(priv.gicd_base +GICD_TYPER ));/* GIC support for Locality specific peripheral interrupts (LPI's) */ if (!(gicd_typer &GICD_TYPER_LPIS )) {pr_err ("GIC implementation does not support LPI's\n" );@@ -46,7 +92,7 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)for (i =0 ; i < num_redist; i++) {u32 offset = i *GIC_REDISTRIBUTOR_OFFSET ; -if ((readl ((uintptr_t )(GICR_BASE + offset))) & +if ((readl ((uintptr_t )(priv.gicr_base + offset))) &GICR_CTLR_ENABLE_LPIS ) {pr_err ("Re-Distributor %d LPI is already enabled\n" , i);@@ -64,19 +110,21 @@ int gic_lpi_tables_init(u64 base, u32 num_redist)GICR_PROPBASER_RAWAWB | ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK)); -writeq (val, (GICR_BASE +GICR_PROPBASER )); - tmp =readl (GICR_BASE +GICR_PROPBASER ); +writeq (val, (uintptr_t )(priv.gicr_base +GICR_PROPBASER )); + tmp =readl ((uintptr_t )(priv.gicr_base +GICR_PROPBASER ));if ((tmp ^ val) &GICR_PROPBASER_SHAREABILITY_MASK ) {if (!(tmp &GICR_PROPBASER_SHAREABILITY_MASK )) { val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |GICR_PROPBASER_CACHEABILITY_MASK ); val |=GICR_PROPBASER_NC ; -writeq (val, (GICR_BASE +GICR_PROPBASER )); +writeq (val, + (uintptr_t )(priv.gicr_base +GICR_PROPBASER )); } } redist_lpi_base = base +LPI_PROPBASE_SZ ; + pend_base = priv.gicr_base +GICR_PENDBASER ;for (i =0 ; i < num_redist; i++) {u32 offset = i *GIC_REDISTRIBUTOR_OFFSET ;@@ -94,9 +142,20 @@ int gic_lpi_tables_init(u64 base, u32 num_redist) }/* Enable LPI for the redistributor */ -writel (GICR_CTLR_ENABLE_LPIS , (uintptr_t )(GICR_BASE + offset)); +writel (GICR_CTLR_ENABLE_LPIS , + (uintptr_t )(priv.gicr_base + offset)); }return 0 ; }arch/arm/lib/gic-v3-its.c int gic_lpi_tables_init(u64 base, u32 num_redist) · line 161
Quoted 10 lines
arch/arm/lib/gic-v3-its.c +10
-0+static const struct udevice_id gic_v3_its_ids[] = { + { .compatible ="arm,gic-v3" }, + {} +}; + +U_BOOT_DRIVER (arm_gic_v3_its) = { + .name ="gic-v3" , + .id =UCLASS_IRQ , + .of_match = gic_v3_its_ids, +};Viele Gr??e,
Stefan--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH v4 2/2 arch: arm: use dt and UCLASS_SYSCON to get gic lpi details
In reply to Rayagonda KokatanurUse device tree and UCLASS_SYSCON driver to get Generic Interrupt Controller (GIC) lpi address and maximum GIC redistributors count.
Also update Kconfig to select REGMAP and SYSCON when GIC_V3_ITS is enabled.
---
Changes from v3:
-Address review comments from Simon,
Correct the data type of variables
Changes from v2:
-Address review comments from Tom Rini,
Fix build errors messages.
arch/arm/Kconfig | 2 + arch/arm/cpu/armv8/fsl-layerscape/soc.c | 28 +---------- arch/arm/include/asm/gic-v3.h | 4 +- arch/arm/lib/gic-v3-its.c | 63 ++++++++++++++++++++++--- 4 files changed, 61 insertions(+), 36 deletions(-)
arch/arm/Kconfig +2 -0
@@ -64,6 +64,8 @@ endif config GIC_V3_ITS bool "ARM GICV3 ITS" + select REGMAP + select SYSCON help ARM GICV3 Interrupt translation service (ITS). Basic support for programming locality specific peripheral
arch/arm/cpu/armv8/fsl-layerscape/soc.c +1 -27
@@ -41,37 +41,11 @@ DECLARE_GLOBAL_DATA_PTR;#endif #ifdef CONFIG_GIC_V3_ITS -#define PENDTABLE_MAX_SZ ALIGN(BIT(ITS_MAX_LPI_NRBITS), SZ_64K) -#define PROPTABLE_MAX_SZ ALIGN(BIT(ITS_MAX_LPI_NRBITS) / 8, SZ_64K) -#define GIC_LPI_SIZE ALIGN(cpu_numcores() * PENDTABLE_MAX_SZ + \ - PROPTABLE_MAX_SZ, SZ_1M) -static int fdt_add_resv_mem_gic_rd_tables (void *blob,u64 base,size_t size) -{ -u32 phandle; -int err; -struct fdt_memory gic_rd_tables; - - gic_rd_tables.start = base; - gic_rd_tables.end = base + size -1 ; - err =fdtdec_add_reserved_memory (blob,"gic-rd-tables" , &gic_rd_tables, - &phandle); -if (err <0 ) -debug ("%s: failed to add reserved memory: %d\n" , __func__, err); - -return err; -} -int ls_gic_rd_tables_init (void *blob) { -u64 gic_lpi_base;int ret; - gic_lpi_base =ALIGN (gd->arch.resv_ram -GIC_LPI_SIZE ,SZ_64K ); - ret =fdt_add_resv_mem_gic_rd_tables (blob, gic_lpi_base,GIC_LPI_SIZE ); -if (ret) -return ret; - - ret =gic_lpi_tables_init (gic_lpi_base,cpu_numcores ()); + ret =gic_lpi_tables_init ();if (ret)debug ("%s: failed to init gic-lpi-tables\n" , __func__);
arch/arm/include/asm/gic-v3.h +2 -2
@@ -127,9 +127,9 @@#define GIC_REDISTRIBUTOR_OFFSET 0x20000#ifdef CONFIG_GIC_V3_ITS -int gic_lpi_tables_init (u64 base,u32 max_redist); +int gic_lpi_tables_init (void );#else -int gic_lpi_tables_init (u64 base,u32 max_redist) +int gic_lpi_tables_init (void ) {return 0 ; }
arch/arm/lib/gic-v3-its.c +56 -7
123 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v4 2/2 arch: arm: use dt and UCLASS_SYSCON to get gic lpi details
Quoted 9 lines · Rayagonda Kokatanur
Use device tree and
UCLASS_SYSCONdriver to get Generic Interrupt Controller (GIC) lpi address and maximum GIC redistributors count.Also update
Kconfigto select REGMAP and SYSCON whenGIC_V3_ITSis enabled.Signed-off-by Rayagonda Kokatanur <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/550341fe/attachment.sig>