Skip to contentSkip to conversation

board: tbs2910: Fix video output with existing environments

PATCH New Soeren Moch 2 participants 2 messages Jul 30, 2020 – Aug 4, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 board: tbs2910: Fix video output with existing environments

Migration to DM_VIDEO changed the output device name (in stout, stderr) from 'vga' to 'vidconsole'. This also was adapted in the default environment. However, existing user defined environments still use 'vga'. Enable this workaround to map the 'vga' name to 'vidconsole'. So we get HDMI video output also with existing legacy environments.

---
Cc: Stefano Babic <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: u-boot at lists.denx.de

There was an automatic fix in the original DM_VIDEO conversion for this case. Apparently this fix was lost on the way to v2020.10-rc1. So we need to enable this explicitly here.

This patch was created on top of f7d0ae9 ("configs: Resync with savedefconfig"), directly after v2020.10-rc1.

---
 configs/tbs2910_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/tbs2910_defconfig +1 -0
index b4eaf9d162..c15a173d91 100644
@@ -100,6 +100,7 @@ CONFIG_DM_VIDEO=y
 # CONFIG_VIDEO_ANSI is not set
 CONFIG_SYS_WHITE_ON_BLACK=y
 # CONFIG_PANEL is not set
+CONFIG_VIDCONSOLE_AS_LCD=y
 CONFIG_I2C_EDID=y
 CONFIG_VIDEO_IPUV3=y
 # CONFIG_GZIP is not set

--
2.17.1

#1 lore raw

PATCH 1/1 board: tbs2910: Fix video output with existing environments

Quoted 13 lines · On Thu, 30 Jul 2020 14:11:57 +0200 Soeren Moch smoch at web.de wrote:

Migration to DM_VIDEO changed the output device name (in stout, stderr) from 'vga' to 'vidconsole'. This also was adapted in the default environment. However, existing user defined environments still use 'vga'. Enable this workaround to map the 'vga' name to 'vidconsole'. So we get HDMI video output also with existing legacy environments.

---
Cc: Stefano Babic <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: u-boot at lists.denx.de

Quoted 6 lines

There was an automatic fix in the original DM_VIDEO conversion for this case. Apparently this fix was lost on the way to v2020.10-rc1. So we need to enable this explicitly here.

This patch was created on top of f7d0ae9 ("configs: Resync with savedefconfig"), directly after v2020.10-rc1.

Applied to u-boot-video/master, thanks!

--
Anatolij