J7200: Add I2C support
Subsystems (2)
Vignesh Raghavendra
maintainercover J7200: Add I2C support
Add I2C and I2C IO expanders nodes for J7200
Based on top of https://lore.kernel.org/linux-arm-kernel/[email protected]/
Vignesh Raghavendra (2):
arm64: dts: ti: j7200: Add I2C nodes
arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
.../dts/ti/k3-j7200-common-proc-board.dts | 49 ++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 77 +++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 ++++++++ 3 files changed, 159 insertions(+)
Signature · 1 line
2.28.0
Vignesh Raghavendra
maintainerPATCH 1/2 arm64: dts: ti: j7200: Add I2C nodes
J7200 has 7 I2Cs main domain, 2 I2Cs in MCU and one in wakeup domain. Add DT nodes of the same.
Signed-off-by Vignesh Raghavendra <[email protected]>
--- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 77 +++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 ++++++++ 2 files changed, 110 insertions(+)
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +77 -0
@@ -196,4 +196,81 @@ main_uart9: serial@2890000 { clocks = <&k3_clks 286 2>; clock-names = "fclk"; }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2000000 0x0 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 187 1>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2010000 0x0 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 188 1>; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2020000 0x0 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 189 1>; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2030000 0x0 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 190 1>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2040000 0x0 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 191 1>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2050000 0x0 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 192 1>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2060000 0x0 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 193 1>; + power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; + }; };
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +33 -0
@@ -81,4 +81,37 @@ mcu_uart0: serial@40a00000 { clocks = <&k3_clks 149 2>; clock-names = "fclk"; }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b00000 0x0 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 1>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b10000 0x0 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 1>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x42120000 0x0 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 1>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; };
Signature · 1 line
2.28.0
Vignesh Raghavendra
maintainerPATCH 2/2 arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
In reply to Vignesh RaghavendraAdd DT nodes for I2C GPIO expanders on main_i2c0 and main_i2c1 and also add the pinmux corresponding to these I2C instances.
Signed-off-by Vignesh Raghavendra <[email protected]>
--- .../dts/ti/k3-j7200-common-proc-board.dts | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+)
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +49 -0
@@ -14,6 +14,22 @@ chosen { }; }; +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ + J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ + J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */ + >; + }; +}; + &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "disabled";
@@ -62,3 +78,36 @@ &main_uart9 { /* UART not brought out */ status = "disabled"; }; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp4: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +};
Signature · 1 line
2.28.0