ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM
Subsystems (2)
PATCH 1/1 ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM
The new 587-200 DHCOR SoM is compatible with the 587-100 prototype, hence just replicate the entries, as there is no pattern matching.
--- board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its +14 -0
@@ -44,12 +44,26 @@ }; config-2 { + /* DT+SoM+board model */ + description = "dh,stm32mp15xx-dhcom-pdk2_somrev1_boardrev0"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + + config-3 { /* DT+SoM+board model */ description = "dh,stm32mp15xx-dhcom-drc02_somrev0_boardrev0"; loadables = "uboot"; fdt = "fdt-2"; }; + config-4 { + /* DT+SoM+board model */ + description = "dh,stm32mp15xx-dhcom-drc02_somrev1_boardrev0"; + loadables = "uboot"; + fdt = "fdt-2"; + }; + /* Add 587-100..587-400 with fdt-2..fdt-4 here */ }; };
Signature · 1 line
2.27.0
PATCH 1/1 ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM
Hi Marek
Quoted 31 lines · Marek Vasut
The new 587-200 DHCOR SoM is compatible with the 587-100 prototype, hence just replicate the entries, as there is no pattern matching.
Signed-off-by Marek Vasut <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 14 ++++++++++++++ 1 file changed, 14 insertions(+)board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its +7
-0@@ -44,12 +44,26 @@ }; config-2 { + /* DT+SoM+board model */ + description = "dh,stm32mp15xx-dhcom-pdk2_somrev1_boardrev0"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + + config-3 { /* DT+SoM+board model */ description = "dh,stm32mp15xx-dhcom-drc02_somrev0_boardrev0"; loadables = "uboot"; fdt = "fdt-2"; };
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its line 69
Quoted 10 lines
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its +7
-0+ config-4 { + /* DT+SoM+board model */ + description = "dh,stm32mp15xx-dhcom-drc02_somrev1_boardrev0"; + loadables = "uboot"; + fdt = "fdt-2"; + }; + /* Add 587-100..587-400 with fdt-2..fdt-4 here */ }; };
Thanks
Patrice
PATCH 1/1 ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM
Quoted 12 lines · Patrice CHOTARD
Hi Marek
Quoted 9 lines · Marek Vasut
The new 587-200 DHCOR SoM is compatible with the 587-100 prototype, hence just replicate the entries, as there is no pattern matching.
Signed-off-by Marek Vasut <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
Applied on u-boot-stm/master
Thanks
Quoted 37 lines
Quoted 22 lines
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its +7
-0@@ -44,12 +44,26 @@ }; config-2 { + /* DT+SoM+board model */ + description = "dh,stm32mp15xx-dhcom-pdk2_somrev1_boardrev0"; + loadables = "uboot"; + fdt = "fdt-1"; + }; + + config-3 { /* DT+SoM+board model */ description = "dh,stm32mp15xx-dhcom-drc02_somrev0_boardrev0"; loadables = "uboot"; fdt = "fdt-2"; };board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its line 69
Quoted 10 lines
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its +7
-0+ config-4 { + /* DT+SoM+board model */ + description = "dh,stm32mp15xx-dhcom-drc02_somrev1_boardrev0"; + loadables = "uboot"; + fdt = "fdt-2"; + }; + /* Add 587-100..587-400 with fdt-2..fdt-4 here */ }; };Reviewed-by Patrice Chotard <[email protected]>Thanks
Patrice