Skip to contentSkip to conversation

kbuild: introduce hostprogs-always-y and userprogs-always-y

PATCH In review Masahiro Yamada 2 participants 2 messages Aug 1, 2020

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kbuild: introduce hostprogs-always-y and userprogs-always-y

To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency.

There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile).

The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'.

This commit adds hostprogs-always-y as a shorthand.

The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles.

userprogs-always-y works as a shorthand.

---

 Documentation/kbuild/makefiles.rst  | 31 ++++++++++++++++++++++++++++-
 samples/auxdisplay/Makefile         |  3 +--
 samples/binderfs/Makefile           |  3 +--
 samples/connector/Makefile          |  3 +--
 samples/hidraw/Makefile             |  3 +--
 samples/mei/Makefile                |  4 +---
 samples/pidfd/Makefile              |  4 +---
 samples/seccomp/Makefile            |  4 +---
 samples/timers/Makefile             |  3 +--
 samples/uhid/Makefile               |  3 +--
 samples/vfs/Makefile                |  3 +--
 samples/watch_queue/Makefile        |  3 +--
 samples/watchdog/Makefile           |  3 +--
 scripts/Makefile                    | 18 ++++++++---------
 scripts/Makefile.clean              | 12 ++++++++---
 scripts/Makefile.lib                | 10 ++++++++++
 scripts/basic/Makefile              |  3 +--
 scripts/dtc/Makefile                |  5 ++---
 scripts/genksyms/Makefile           |  3 +--
 scripts/mod/Makefile                |  4 ++--
 scripts/selinux/genheaders/Makefile |  4 +---
 scripts/selinux/mdp/Makefile        |  3 +--
 22 files changed, 77 insertions(+), 55 deletions(-)
Documentation/kbuild/makefiles.rst +30 -1
index 14d8e7d23c04..b81b8913a5a3 100644
@@ -749,6 +749,10 @@ Both possibilities are described in the following.
 		hostprogs     := lxdialog
 		always-y      := $(hostprogs)
 
+	Kbuild provides the following shorthand for this:
+
+		hostprogs-always-y := lxdialog
+
 	This will tell kbuild to build lxdialog even if not referenced in
 	any rule.
 
@@ -831,7 +835,32 @@ The syntax is quite similar. The difference is to use "userprogs" instead of
 5.4 When userspace programs are actually built
 ----------------------------------------------
 
-	Same as "When host programs are actually built".
+	Kbuild builds userspace programs only when told to do so.
+	There are two ways to do this.
+
+	(1) Add it as the prerequisite of another file
+
+	Example::
+
+		#net/bpfilter/Makefile
+		userprogs := bpfilter_umh
+		$(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh
+
+	$(obj)/bpfilter_umh is built before $(obj)/bpfilter_umh_blob.o
+
+	(2) Use always-y
+
+	Example::
+
+		userprogs := binderfs_example
+		always-y := $(userprogs)
+
+	Kbuild provides the following shorthand for this:
+
+		userprogs-always-y := binderfs_example
+
+	This will tell Kbuild to build binderfs_example when it visits this
+	Makefile.
 
 6 Kbuild clean infrastructure
 =============================
samples/auxdisplay/Makefile +1 -2
index dbdf939af94a..19d5568938c3 100644
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-userprogs := cfag12864b-example
-always-y := $(userprogs)
+userprogs-always-y += cfag12864b-example
samples/binderfs/Makefile +1 -2
index 989e4badaee2..629e43b9b129 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-userprogs := binderfs_example
-always-y := $(userprogs)
+userprogs-always-y += binderfs_example
 
 userccflags += -I usr/include
samples/connector/Makefile +1 -2
index 50cb40e09a7b..d98a9e047c11 100644
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_SAMPLE_CONNECTOR) += cn_test.o
 
-userprogs := ucon
-always-$(CONFIG_CC_CAN_LINK) := $(userprogs)
+userprogs-always-$(CONFIG_CC_CAN_LINK) += ucon
 
 userccflags += -I usr/include
samples/hidraw/Makefile +1 -2
index d2c77ed60b39..594d989e5486 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-userprogs := hid-example
-always-y := $(userprogs)
+userprogs-always-y += hid-example
 
 userccflags += -I usr/include
samples/mei/Makefile +1 -3
index 329411f82369..c54b8a0ab04e 100644
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 # Copyright (c) 2012-2019, Intel Corporation. All rights reserved.
-
-userprogs := mei-amt-version
-always-y := $(userprogs)
+userprogs-always-y += mei-amt-version
 
 userccflags += -I usr/include
samples/pidfd/Makefile +1 -3
index 6e5b67e648c2..9754e2d81f70 100644
@@ -1,6 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-
-usertprogs := pidfd-metadata
-always-y := $(userprogs)
+usertprogs-always-y += pidfd-metadata
 
 userccflags += -I usr/include
samples/seccomp/Makefile +1 -3
index 75916c23e416..c85ae0ed8342 100644
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
-userprogs := bpf-fancy dropper bpf-direct user-trap
+userprogs-always-y += bpf-fancy dropper bpf-direct user-trap
 
 bpf-fancy-objs := bpf-fancy.o bpf-helper.o
 
 userccflags += -I usr/include
-
-always-y := $(userprogs)
samples/timers/Makefile +1 -2
index 15c7ddbc8c51..e6836cdea4e2 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-userprogs := hpet_example
-always-y := $(userprogs)
+userprogs-always-y += hpet_example
 
 userccflags += -I usr/include
samples/uhid/Makefile +1 -2
index 9e652fc34103..0aa424ec4899 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-userprogs := uhid-example
-always-y := $(userprogs)
+userprogs-always-y += uhid-example
 
 userccflags += -I usr/include
samples/vfs/Makefile +1 -2
index 00b6824f9237..6377a678134a 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-userprogs := test-fsmount test-statx
-always-y := $(userprogs)
+userprogs-always-y += test-fsmount test-statx
 
 userccflags += -I usr/include
samples/watch_queue/Makefile +1 -2
index 792b22f593cf..c0db3a6bc524 100644
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-userprogs := watch_test
-always-y := $(userprogs)
+userprogs-always-y += watch_test
 
 userccflags += -I usr/include
samples/watchdog/Makefile +1 -2
index 17384cfb387e..ab39d23dc96b 100644
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-userprogs := watchdog-simple
-always-y := $(userprogs)
+userprogs-always-y += watchdog-simple
scripts/Makefile +8 -10
index 95ecf970c74c..bc018e4b733e 100644
@@ -3,14 +3,14 @@
 # scripts contains sources for various helper programs used throughout
 # the kernel for the build process.
 
-always-$(CONFIG_BUILD_BIN2C)			+= bin2c
-always-$(CONFIG_KALLSYMS)			+= kallsyms
-always-$(BUILD_C_RECORDMCOUNT)			+= recordmcount
-always-$(CONFIG_BUILDTIME_TABLE_SORT)		+= sorttable
-always-$(CONFIG_ASN1)				+= asn1_compiler
-always-$(CONFIG_MODULE_SIG_FORMAT)		+= sign-file
-always-$(CONFIG_SYSTEM_TRUSTED_KEYRING)		+= extract-cert
-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
+hostprogs-always-$(CONFIG_BUILD_BIN2C)			+= bin2c
+hostprogs-always-$(CONFIG_KALLSYMS)			+= kallsyms
+hostprogs-always-$(BUILD_C_RECORDMCOUNT)		+= recordmcount
+hostprogs-always-$(CONFIG_BUILDTIME_TABLE_SORT)		+= sorttable
+hostprogs-always-$(CONFIG_ASN1)				+= asn1_compiler
+hostprogs-always-$(CONFIG_MODULE_SIG_FORMAT)		+= sign-file
+hostprogs-always-$(CONFIG_SYSTEM_TRUSTED_KEYRING)	+= extract-cert
+hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
@@ -26,8 +26,6 @@ HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
 HOSTLDLIBS_sorttable = -lpthread
 endif
 
-hostprogs := $(always-y) $(always-m)
-
 # The following programs are only built on demand
 hostprogs += unifdef
 
scripts/Makefile.clean +9 -3
index 3cdf31218198..d9e0ceace6a6 100644
@@ -27,9 +27,15 @@ subdir-ymn	:= $(addprefix $(obj)/,$(subdir-ymn))
 # build a list of files to remove, usually relative to the current
 # directory
 
-__clean-files	:= $(extra-y) $(extra-m) $(extra-)       \
-		   $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files)   \
-		   $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) $(userprogs)
+__clean-files	:= \
+	$(clean-files) $(targets) $(hostprogs) $(userprogs) \
+	$(extra-y) $(extra-m) $(extra-) \
+	$(always-y) $(always-m) $(always-) \
+	$(hostprogs-always-y) $(hostprogs-always-m) $(hostprogs-always-) \
+	$(userprogs-always-y) $(userprogs-always-m) $(userprogs-always-)
+
+# deprecated
+__clean-files	+= $(always) $(hostprogs-y) $(hostprogs-m) $(hostprogs-)
 
 __clean-files   := $(filter-out $(no-clean-files), $(__clean-files))
 
scripts/Makefile.lib +10 -0
index 5cfd377778b4..f940f22292de 100644
@@ -68,6 +68,16 @@ real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))
 
 always-y += $(always-m)
 
+# hostprogs-always-y += foo
+# ... is a shorthand for
+# hostprogs += foo
+# always-y  += foo
+# userprogs-always-y is likewise.
+hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
+userprogs += $(userprogs-always-y) $(userprogs-always-m)
+always-y += $(hostprogs-always-y) $(hostprogs-always-m) \
+	    $(userprogs-always-y) $(userprogs-always-m)
+
 # DTB
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
 extra-y				+= $(dtb-y)
scripts/basic/Makefile +1 -2
index 290dd27d2809..eeb6a38c5551 100644
@@ -2,5 +2,4 @@
 #
 # fixdep: used to generate dependency information during build process
 
-hostprogs	:= fixdep
-always-y	:= $(hostprogs)
+hostprogs-always-y	+= fixdep
scripts/dtc/Makefile +2 -3
index 0b44917f981c..a698ece43fff 100644
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 # scripts/dtc makefile
 
-hostprogs			:= dtc
-always-$(CONFIG_DTC)		+= $(hostprogs)
-always-$(CHECK_DT_BINDING)	+= $(hostprogs)
+hostprogs-always-$(CONFIG_DTC)		+= dtc
+hostprogs-always-$(CHECK_DT_BINDING)	+= dtc
 
 dtc-objs	:= dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
 		   srcpos.o checks.o util.o
scripts/genksyms/Makefile +1 -2
index d328de1e10ee..ce4f99935de5 100644
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-hostprogs	:= genksyms
-always-y	:= $(hostprogs)
+hostprogs-always-y	+= genksyms
 
 genksyms-objs	:= genksyms.o parse.tab.o lex.lex.o
 
scripts/mod/Makefile +2 -2
index 296b6a3878b2..78071681d924 100644
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 OBJECT_FILES_NON_STANDARD := y
 
-hostprogs	:= modpost mk_elfconfig
-always-y	:= $(hostprogs) empty.o
+hostprogs-always-y	+= modpost mk_elfconfig
+always-y		+= empty.o
 
 modpost-objs	:= modpost.o file2alias.o sumversion.o
 
scripts/selinux/genheaders/Makefile +1 -3
index 70cf8d95d07c..1faf7f07e8db 100644
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-hostprogs	:= genheaders
+hostprogs-always-y += genheaders
 HOST_EXTRACFLAGS += \
 	-I$(srctree)/include/uapi -I$(srctree)/include \
 	-I$(srctree)/security/selinux/include
-
-always-y	:= $(hostprogs)
scripts/selinux/mdp/Makefile +1 -2
index 3026f3c2aa2b..d61058ddd15c 100644
@@ -1,8 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
-hostprogs	:= mdp
+hostprogs-always-y += mdp
 HOST_EXTRACFLAGS += \
 	-I$(srctree)/include/uapi -I$(srctree)/include \
 	-I$(srctree)/security/selinux/include -I$(objtree)/include
 
-always-y	:= $(hostprogs)
 clean-files	:= policy.* file_contexts
Signature · 1 line
2.25.1