wireless: airo: use generic power management
Subsystems (3)
PATCH 1/1 wireless: airo: use generic power management
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers.
Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs.
--- drivers/net/wireless/cisco/airo.c | 39 +++++++++++++++---------------- 1 file changed, 19 insertions(+), 20 deletions(-)
drivers/net/wireless/cisco/airo.c +19 -20
@@ -74,16 +74,19 @@ MODULE_DEVICE_TABLE(pci, card_ids);static int airo_pci_probe (struct pci_dev *,const struct pci_device_id *);static void airo_pci_remove (struct pci_dev *); -static int airo_pci_suspend (struct pci_dev *pdev,pm_message_t state); -static int airo_pci_resume (struct pci_dev *pdev); +static int __maybe_unused airo_pci_suspend (struct device *dev); +static int __maybe_unused airo_pci_resume (struct device *dev); + +static SIMPLE_DEV_PM_OPS(airo_pci_pm_ops, + airo_pci_suspend, + airo_pci_resume);static struct pci_driver airo_driver = { - .name =DRV_NAME , - .id_table = card_ids, - .probe = airo_pci_probe, - .remove = airo_pci_remove, - .suspend = airo_pci_suspend, - .resume = airo_pci_resume, + .name =DRV_NAME , + .id_table = card_ids, + .probe = airo_pci_probe, + .remove = airo_pci_remove, + .driver.pm = &airo_pci_pm_ops, };#endif /* CONFIG_PCI */
@@ -5573,9 +5576,9 @@ static void airo_pci_remove(struct pci_dev *pdev)pci_disable_device (pdev); } -static int airo_pci_suspend (struct pci_dev *pdev,pm_message_t state) +static int __maybe_unused airo_pci_suspend (struct device *dev_d) { -struct net_device *dev =pci_get_drvdata (pdev); +struct net_device *dev =dev_get_drvdata (dev_d);struct airo_info *ai = dev->ml_priv;Cmd cmd;Resp rsp;
@@ -5591,25 +5594,21 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state)return -EAGAIN ;disable_MAC (ai,0 );netif_device_detach (dev); - ai->power = state; + ai->power =PMSG_SUSPEND ; cmd.cmd =HOSTSLEEP ;issuecommand (ai, &cmd, &rsp); -pci_enable_wake (pdev,pci_choose_state (pdev, state),1 ); -pci_save_state (pdev); -pci_set_power_state (pdev,pci_choose_state (pdev, state)); +device_wakeup_enable (dev_d);return 0 ; } -static int airo_pci_resume (struct pci_dev *pdev) +static int __maybe_unused airo_pci_resume (struct device *dev_d) { -struct net_device *dev =pci_get_drvdata (pdev); +struct net_device *dev =dev_get_drvdata (dev_d);struct airo_info *ai = dev->ml_priv; -pci_power_t prev_state = pdev->current_state; +pci_power_t prev_state =to_pci_dev (dev_d)->current_state; -pci_set_power_state (pdev,PCI_D0 ); -pci_restore_state (pdev); -pci_enable_wake (pdev,PCI_D0 ,0 ); +device_wakeup_disable (dev_d);if (prev_state !=PCI_D1 ) {reset_card (dev,0 );
Signature · 1 line
2.27.0
This patch is compile-tested only.
Thanks
Vaibhav Gupta
Re: [PATCH v1] airo: use generic power management
In reply to Vaibhav GuptaQuoted 4 lines · Vaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers.
Quoted 8 lines
Switch to generic power management framework using a single "struct
dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs.Signed-off-by Vaibhav Gupta <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
c3ab1804b168 airo: use generic power management
Signature · 3 lines
https://patchwork.kernel.org/patch/11688983/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Re: [Linux-kernel-mentees] [PATCH v1] airo: use generic power management
In reply to Vaibhav GuptaQuoted 4 lines · Vaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers.
Quoted 8 lines
Switch to generic power management framework using a single "struct
dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs.Signed-off-by Vaibhav Gupta <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
c3ab1804b168 airo: use generic power management
Signature · 8 lines
https://patchwork.kernel.org/patch/11688983/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ Linux-kernel-mentees mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees