powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
PATCH 1/1 powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4.
Without this patch, /proc/cpuinfo on a SMT4 DD1 POWER10 looks like this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)
--- arch/powerpc/kernel/setup-common.c | 1 + 1 file changed, 1 insertion(+)
arch/powerpc/kernel/setup-common.c +1 -0
@@ -311,6 +311,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) min = pvr &0xFF ;break ;case 0x004e :/* POWER9 bits 12-15 give chip type */ +case 0x0080 :/* POWER10 bit 12 gives SMT8/4 */ maj = (pvr >>8 ) &0x0F ; min = pvr &0xFF ;break ;
Signature · 1 line
2.26.2
Quoted 9 lines · Michael Neuling
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4.
Without this patch,
/proc/cpuinfoon a SMT4 DD1 POWER10 looks like this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)Signed-off-by Michael Neuling <[email protected]>
arch/powerpc/kernel/setup-common.c static int show_cpuinfo(struct seq_file *m, void *v) · line 314
Quoted 13 lines
--- arch/powerpc/kernel/setup-common.c | 1 + 1 file changed, 1 insertion(+)arch/powerpc/kernel/setup-common.c +1
-0@@ -311,6 +311,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) min = pvr &0xFF ;break ;case 0x004e :/* POWER9 bits 12-15 give chip type */ +case 0x0080 :/* POWER10 bit 12 gives SMT8/4 */
Correct. P9 and P10 have chip type (smt4 vs smt8 core) encoded in bits PVR chip type bits 12-15.
Thanks for the fix.
--Vaidy
Michael Ellerman
reviewerQuoted 8 lines · Michael Neuling
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4.
Without this patch,
/proc/cpuinfoon a SMT4 DD1 POWER10 looks like this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)
Quoted 4 lines
Signed-off-by Michael Neuling <[email protected]>--- arch/powerpc/kernel/setup-common.c | 1 + 1 file changed, 1 insertion(+)
This should have a Fixes: pointing at something so it gets backported.
cheers
Quoted 9 lines · Michael Ellerman
Quoted 8 lines · Michael Neuling
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4.
Without this patch,
/proc/cpuinfoon a SMT4 DD1 POWER10 looks like this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)
Quoted 6 lines
Quoted 4 lines
Signed-off-by Michael Neuling <[email protected]>--- arch/powerpc/kernel/setup-common.c | 1 + 1 file changed, 1 insertion(+)This should have a Fixes: pointing at something so it gets backported.
Yes it should.
Mikey
Michael Ellerman
AppliedQuoted 7 lines · Michael Neuling
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4.
Without this patch,
/proc/cpuinfoon a SMT4 DD1 POWER10 looks like this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)
Applied to powerpc/fixes.
[1/1] powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
https://git.kernel.org/powerpc/c/030a2c689fb46e1690f7ded8b194bab7678efb28
cheers