arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Subsystems (2)
PATCH 1/1 arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
From: Thierry Reding <[email protected]>
The P2888 processor module contains an EEPROM that provides means of identifying the module. The P2822 carrier board contains the same EEPROM with information identifying the carrier board. Both of them ar accessed via the GEN_I2C1 bus.
Signed-off-by Thierry Reding <[email protected]>
--- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 15 +++++++++++++++ .../arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 13 +++++++++++++ 2 files changed, 28 insertions(+)
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +15 -0
@@ -57,6 +57,21 @@ serial@3110000 { status = "okay"; }; + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + /* SDMMC1 (SD/MMC) */ mmc@3400000 { cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +13 -0
@@ -23,6 +23,19 @@ interrupt-controller@2a40000 { }; }; + i2c@3160000 { + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + ddc: i2c@31c0000 { status = "okay"; };
Signature · 1 line
2.27.0