Introduce PMIC based USB type C detection

index 559dd06117e7..63789cf88fce 100644
@@ -73,6 +73,18 @@ config TYPEC_TPS6598X
 	  If you choose to build this driver as a dynamically linked module, the
 	  module will be called tps6598x.ko.
 
+config TYPEC_QCOM_PMIC
+	tristate "Qualcomm PMIC USB Type-C driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  Driver for supporting role switch over the Qualcomm PMIC.  This will
+	  handle the USB Type-C role and orientation detection reported by the
+	  QCOM PMIC if the PMIC has the capability to handle USB Type-C
+	  detection.
+
+	  It will also enable the VBUS output to connected devices when a
+	  DFP connection is made.
+
 source "drivers/usb/typec/mux/Kconfig"
 
 source "drivers/usb/typec/altmodes/Kconfig"

index 7753a5c3cd46..cceffd987643 100644
@@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
 obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
 obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
 obj-$(CONFIG_TYPEC_TPS6598X)	+= tps6598x.o
+obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
 obj-$(CONFIG_TYPEC)		+= mux/

new file mode 100644
index 000000000000..877e979f413f
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm PMIC based USB type C Detection Driver
+
+maintainers:
+  - Wesley Cheng <[email protected]>
+
+description: |
+  Qualcomm PMIC Type C Detect
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-usb-typec
+
+  reg:
+    maxItems: 1
+    description: Type C base address
+
+  interrupts:
+    maxItems: 1
+    description: CC change interrupt from PMIC
+
+  connector:
+    description: Connector type for remote endpoints
+    type: object
+
+    properties:
+      compatible:
+        $ref: /schemas/connector/usb-connector.yaml#/properties/compatible
+        enum:
+          - usb-c-connector
+
+      power-role:
+        $ref: /schemas/connector/usb-connector.yaml#/properties/power-role
+        enum:
+         - dual
+         - source
+         - sink
+
+      data-role:
+        $ref: /schemas/connector/usb-connector.yaml#/properties/data-role
+        enum:
+          - dual
+          - host
+          - device
+
+      ports:
+        description: Remote endpoint connections
+        type: object
+        $ref: /schemas/connector/usb-connector.yaml#/properties/ports
+
+        properties:
+          port@0:
+            description: Remote endpoints for the High Speed path
+            type: object
+
+          port@1:
+            description: Remote endpoints for the Super Speed path
+            type: object
+
+            properties:
+              endpoint@0:
+                description: Connection to USB type C mux node
+                type: object
+
+                properties:
+                  remote-endpoint:
+                    description: Node reference to the type C mux
+
+              endpoint@1:
+                description: Connection to role switch node
+                type: object
+
+                properties:
+                  remote-endpoint:
+                    description: Node reference to the role switch node
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pm8150b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_typec: typec@1500 {
+            compatible = "qcom,pm8150b-usb-typec";
+            reg = <0x1500>;
+            interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
+
+            connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                    };
+                    port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        usb3_data_ss: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&qmp_ss_mux>;
+                        };
+                        usb3_role: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&dwc3_drd_switch>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...

index e112e8876db6..053c659734a7 100644
@@ -53,6 +53,13 @@ power-on@800 {
 			status = "disabled";
 		};
 
+		pm8150b_typec: typec@1500 {
+			compatible = "qcom,pm8150b-usb-typec";
+			status = "disabled";
+			reg = <0x1500>;
+			interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pm8150b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;

index 053c659734a7..9e560c1ca30d 100644
@@ -53,6 +53,12 @@ power-on@800 {
 			status = "disabled";
 		};
 
+		pm8150b_vbus: dcdc@1100 {
+			compatible = "qcom,pm8150b-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
 		pm8150b_typec: typec@1500 {
 			compatible = "qcom,pm8150b-usb-typec";
 			status = "disabled";

index 6c6325c3af59..ba3b5b802954 100644
@@ -409,6 +409,10 @@ &ufs_mem_phy {
 	vdda-pll-max-microamp = <19000>;
 };
 
+&pm8150b_vbus {
+	status = "okay";
+};
+
 &usb_1_hsphy {
 	status = "okay";
 	vdda-pll-supply = <&vdd_usb_hs_core>;