board: atmel: common: introduce at91_set_eth1addr for second interface
PATCH 1/1 board: atmel: common: introduce at91_set_eth1addr for second interface
We already have a function to retrieve the mac address from one EEPROM. For boards with a second Ethernet interface, however, we would require another EEPROM with a second unique MAC address. Introduce at91_set_eth1addr which will look for a second EEPROM and set the 'eth1addr' variable with the obtained MAC address.
--- arch/arm/mach-at91/include/mach/at91_common.h | 1 + board/atmel/common/mac_eeprom.c | 33 +++++++++++++++++++ 2 files changed, 34 insertions(+)
arch/arm/mach-at91/include/mach/at91_common.h +1 -0
@@ -40,6 +40,7 @@ void configure_ddrcfg_input_buffers(bool open);#endif int at91_set_ethaddr (int offset); +int at91_set_eth1addr (int offset);void at91_spi_nor_set_ethaddr (void );int at91_video_show_board_info (void );
board/atmel/common/mac_eeprom.c +33 -0
@@ -35,3 +35,36 @@ int at91_set_ethaddr(int offset)return 0 ; } + +/* this function will set eth1addr from a second eeprom, if available */ +int at91_set_eth1addr (int offset) +{ +const int ETH_ADDR_LEN =6 ; +unsigned char ethaddr[ETH_ADDR_LEN ]; +/* configure eth1addr for second interface */ +const char *ETHADDR_NAME ="eth1addr" ; +struct udevice *dev; +int ret; + +if (env_get (ETHADDR_NAME )) +return 0 ; + +/* first eeprom is retrieved, this is for the first interface */ + ret =uclass_first_device_err (UCLASS_I2C_EEPROM , &dev); +if (ret) +return ret; + +/* attempt to obtain a second eeprom device */ + ret =uclass_next_device (&dev); +if (ret) +return ret; + + ret =i2c_eeprom_read (dev, offset, ethaddr,6 ); +if (ret) +return ret; + +if (is_valid_ethaddr (ethaddr)) +eth_env_set_enetaddr (ETHADDR_NAME , ethaddr); + +return 0 ; +}
Signature · 1 line
2.25.1
PATCH 1/1 board: atmel: common: introduce at91_set_eth1addr for second interface
Quoted 8 lines · Eugen Hristev
We already have a function to retrieve the mac address from one EEPROM. For boards with a second Ethernet interface, however, we would require another EEPROM with a second unique MAC address. Introduce
at91_set_eth1addrwhich will look for a second EEPROM and set the 'eth1addr' variable with the obtained MAC address.Signed-off-by Eugen Hristev <[email protected]>---
Applied to u-boot-atmel/next