platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
Subsystems (6)
v4 cover platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
The EC reports a variety of error codes. Most of those, with the exception of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual error code gets lost. In cros_ec_cmd_xfer_status(), convert all EC errors to Linux error codes to report a more meaningful error to the caller to aid debugging.
To prepare for this change, handle error codes other than -EPROTO for all callers of cros_ec_cmd_xfer_status(). Specifically, no longer assume that -EPROTO reflects an error from the EC and all other error codes reflect a transfer error.
v2: Add patches 1/4 to 3/4 to handle callers of cros_ec_cmd_xfer_status()
v3: Add patches 4/6 and 5/6 to handle additional callers of
cros_ec_cmd_xfer_status()
Use -ENOPROTOOPT for EC_RES_INVALID_VERSION
Implement function to convert error codes
v4: Add coments describing the functionality of cros_ec_num_pwms().
Add patch 7/7 to clean up cros_ec_num_pwms() after the new error code support has been implemented.
Rebased series to v5.8.
----------------------------------------------------------------
Guenter Roeck (7):
iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC
pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
pwm: cros-ec: Simplify EC error handling
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 2 +- drivers/input/keyboard/cros_ec_keyb.c | 2 +- drivers/platform/chrome/cros_ec_lightbar.c | 10 ++--- drivers/platform/chrome/cros_ec_proto.c | 52 +++++++++++++++++----- drivers/platform/chrome/cros_ec_sysfs.c | 24 ++++------ drivers/pwm/pwm-cros-ec.c | 37 +++++++-------- 6 files changed, 74 insertions(+), 53 deletions(-)
PATCH v4 1/7 iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
A follow-up patch will extend the number of errors reported by cros_ec_cmd_xfer_status(). Specifically, the function will return -EOPNOTSUPP if a command is not supported by the EC. Prepare for it.
---
v4: No change
v3: No change
v2: No change
drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c +1 -1
@@ -73,7 +73,7 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev, st->core.param.sensor_offset.flags =0 ; ret =cros_ec_motion_send_host_cmd (&st->core,0 ); -if (ret == -EPROTO ) { +if (ret == -EPROTO || ret == -EOPNOTSUPP ) {/* Reading calibscale is not supported on older EC. */ *val =1 ; *val2 =0 ;
Signature · 1 line
2.17.1
PATCH v4 2/7 cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
In reply to Guenter RoeckSince commit c5cd2b47b203 ("platform/chrome: cros_ec_proto: Report command not supported") we can no longer assume that cros_ec_cmd_xfer_status() reports -EPROTO for all errors returned by the EC itself. A follow-up patch will change cros_ec_cmd_xfer_status() to report additional errors reported by the EC as distinguished Linux error codes.
Handle this change by no longer assuming that -EPROTO is used to report all errors returned by the EC itself. Since errors reported by the EC are already reported in text form through sysfs attributes, extend this form of error reporting to all errors reported by cros_ec_cmd_xfer_status().
---
v4: No change
v3: No change
v2: Added patch
drivers/platform/chrome/cros_ec_lightbar.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/platform/chrome/cros_ec_lightbar.c +4 -6
@@ -117,7 +117,7 @@ static int get_lightbar_version(struct cros_ec_dev *ec, param = (struct ec_params_lightbar *)msg->data; param->cmd =LIGHTBAR_CMD_VERSION ; ret =cros_ec_cmd_xfer_status (ec->ec_dev, msg); -if (ret <0 ) { +if (ret <0 && ret != -EINVAL ) { ret =0 ; goto exit; }
@@ -298,11 +298,9 @@ static ssize_t sequence_show(struct device *dev, goto exit; ret =cros_ec_cmd_xfer_status (ec->ec_dev, msg); -if (ret == -EPROTO ) { - ret =scnprintf (buf,PAGE_SIZE , -"ERROR: EC returned %d\n" , msg->result); - goto exit; - }else if (ret <0 ) { +if (ret <0 ) { + ret =scnprintf (buf,PAGE_SIZE ,"XFER / EC ERROR %d / %d\n" , + ret, msg->result); goto exit; }
Signature · 1 line
2.17.1
PATCH v4 3/7 platform/chrome: cros_ec_sysfs: Report range of error codes from EC
In reply to Guenter RoeckSince commit c5cd2b47b203 ("platform/chrome: cros_ec_proto: Report command not supported") we can no longer assume that cros_ec_cmd_xfer_status() reports -EPROTO for all errors returned by the EC itself. A follow-up patch will change cros_ec_cmd_xfer_status() to report additional errors reported by the EC as distinguished Linux error codes.
Prepare for this change by always reporting both the Linux error code and the EC error code in sysfs attributes.
---
v4: No change
v3: No change
v2: Added patch
drivers/platform/chrome/cros_ec_sysfs.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-)
drivers/platform/chrome/cros_ec_sysfs.c +9 -15
@@ -150,12 +150,10 @@ static ssize_t version_show(struct device *dev, msg->command =EC_CMD_GET_BUILD_INFO + ec->cmd_offset; msg->insize =EC_HOST_PARAM_SIZE ; ret =cros_ec_cmd_xfer_status (ec->ec_dev, msg); -if (ret == -EPROTO ) { - count +=scnprintf (buf + count,PAGE_SIZE - count, -"Build info: EC error %d\n" , msg->result); - }else if (ret <0 ) { +if (ret <0 ) { count +=scnprintf (buf + count,PAGE_SIZE - count, -"Build info: XFER ERROR %d\n" , ret); +"Build info: XFER / EC ERROR %d / %d\n" , + ret, msg->result); }else { msg->data[EC_HOST_PARAM_SIZE -1 ] ='\0' ; count += scnprintf(buf + count, PAGE_SIZE - count,
@@ -166,12 +164,10 @@ static ssize_t version_show(struct device *dev, msg->command =EC_CMD_GET_CHIP_INFO + ec->cmd_offset; msg->insize =sizeof (*r_chip); ret =cros_ec_cmd_xfer_status (ec->ec_dev, msg); -if (ret == -EPROTO ) { - count +=scnprintf (buf + count,PAGE_SIZE - count, -"Chip info: EC error %d\n" , msg->result); - }else if (ret <0 ) { +if (ret <0 ) { count +=scnprintf (buf + count,PAGE_SIZE - count, -"Chip info: XFER ERROR %d\n" , ret); +"Chip info: XFER / EC ERROR %d / %d\n" , + ret, msg->result); }else { r_chip = (struct ec_response_get_chip_info *)msg->data;
@@ -190,12 +186,10 @@ static ssize_t version_show(struct device *dev, msg->command =EC_CMD_GET_BOARD_VERSION + ec->cmd_offset; msg->insize =sizeof (*r_board); ret =cros_ec_cmd_xfer_status (ec->ec_dev, msg); -if (ret == -EPROTO ) { - count +=scnprintf (buf + count,PAGE_SIZE - count, -"Board version: EC error %d\n" , msg->result); - }else if (ret <0 ) { +if (ret <0 ) { count +=scnprintf (buf + count,PAGE_SIZE - count, -"Board version: XFER ERROR %d\n" , ret); +"Board version: XFER / EC ERROR %d / %d\n" , + ret, msg->result); }else { r_board = (struct ec_response_board_version *)msg->data;
Signature · 1 line
2.17.1
PATCH v4 4/7 pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
In reply to Guenter RoeckSince commit c5cd2b47b203 ("platform/chrome: cros_ec_proto: Report command not supported") we can no longer assume that cros_ec_cmd_xfer_status() reports -EPROTO for all errors returned by the EC itself. A follow-up patch will change cros_ec_cmd_xfer_status() to report additional errors reported by the EC as distinguished Linux error codes.
Handle this change by no longer assuming that only -EPROTO is used to report all errors returned by the EC itself. Instead, support both the old and the new error codes.
Add a comment describing cros_ec_num_pwms() to explain its functionality.
---
v4: Added comments describing cros_ec_num_pwms() in more detail
Added Thierry's Acked-by: tag
v3: Added patch
drivers/pwm/pwm-cros-ec.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-)
drivers/pwm/pwm-cros-ec.c +22 -7
@@ -204,6 +204,11 @@ static const struct pwm_ops cros_ec_pwm_ops = { .owner = THIS_MODULE, }; +/* +* Determine the number of supported PWMs. The EC does not return the number +* of PWMs it supports directly, so we have to read the pwm duty cycle for +* subsequent channels until we get an error. +*/ static int cros_ec_num_pwms (struct cros_ec_device *ec) {int i, ret;
@@ -213,20 +218,30 @@ static int cros_ec_num_pwms(struct cros_ec_device *ec)u32 result =0 ; ret =__cros_ec_pwm_get_duty (ec, i, &result); -/* We want to parse EC protocol errors */ -if (ret <0 && !(ret == -EPROTO && result)) -return ret; -/* * We look for SUCCESS, INVALID_COMMAND, or INVALID_PARAM * responses; everything else is treated as an error. +* The EC error codes either map to -EOPNOTSUPP / -EINVAL, +* or -EPROTO is returned and the EC error is in the result +* field. Check for both. */ -if (result ==EC_RES_INVALID_COMMAND ) +switch (ret) { +case -EOPNOTSUPP :/* invalid command */ return -ENODEV ; -else if (result ==EC_RES_INVALID_PARAM ) +case -EINVAL :/* invalid parameter */ return i; -else if (result) +case -EPROTO : +/* Old or new error return code: Handle both */ +if (result ==EC_RES_INVALID_COMMAND ) +return -ENODEV ; +else if (result ==EC_RES_INVALID_PARAM ) +return i;return -EPROTO ; +default : +if (ret <0 ) +return ret; +break ; + } }return U8_MAX ;
Signature · 1 line
2.17.1
Re: [PATCH v4 4/7] pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
Hello,
Quoted 10 lines · Guenter Roeck
Since commit
c5cd2b47b203("platform/chrome:cros_ec_proto: Report command not supported") we can no longer assume thatcros_ec_cmd_xfer_status()reports-EPROTOfor all errors returned by the EC itself. A follow-up patch will changecros_ec_cmd_xfer_status()to report additional errors reported by the EC as distinguished Linux error codes.Handle this change by no longer assuming that only
-EPROTOis used to report all errors returned by the EC itself. Instead, support both the old and the new error codes.
Quoted 8 lines
Add a comment describing
cros_ec_num_pwms()to explain its functionality.Cc Gwendal Grignou <[email protected]>Cc Yu-Hsuan Hsu <[email protected]>Cc Prashant Malani <[email protected]>Cc Brian Norris <[email protected]>Acked-by Thierry Reding <[email protected]>Signed-off-by Guenter Roeck <[email protected]>
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
PATCH v4 5/7 platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
In reply to Guenter Roeck-ENOTSUPP is not a SUSV4 error code and should not be used. Use -ENOPROTOOPT instead to report EC_RES_INVALID_VERSION responses from the EC. This matches match the NFS response for unsupported protocol versions.
---
v4: Added Dmitry's Acked-by: tag
v3: Added patch
drivers/input/keyboard/cros_ec_keyb.c | 2 +- drivers/platform/chrome/cros_ec_proto.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/input/keyboard/cros_ec_keyb.c +1 -1
@@ -348,7 +348,7 @@ static int cros_ec_keyb_info(struct cros_ec_device *ec_dev, params->event_type = event_type; ret =cros_ec_cmd_xfer_status (ec_dev, msg); -if (ret == -ENOTSUPP ) { +if (ret == -ENOPROTOOPT ) {/* With older ECs we just return 0 for everything */ memset (result,0 , result_size); ret =0 ;
drivers/platform/chrome/cros_ec_proto.c +2 -2
@@ -555,7 +555,7 @@ EXPORT_SYMBOL(cros_ec_cmd_xfer);* * Return: * >=0 - The number of bytes transferred -* -ENOTSUPP - Operation not supported +* -ENOPROTOOPT - Operation not supported * -EPROTO - Protocol error */ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
@@ -569,7 +569,7 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, }else if (msg->result ==EC_RES_INVALID_VERSION ) {dev_dbg (ec_dev->dev,"Command invalid version (err:%d)\n" , msg->result); -return -ENOTSUPP ; +return -ENOPROTOOPT ; }else if (msg->result !=EC_RES_SUCCESS ) {dev_dbg (ec_dev->dev,"Command result (err: %d)\n" , msg->result);return -EPROTO ;
Signature · 1 line
2.17.1
PATCH v4 6/7 platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
In reply to Guenter RoeckThe EC reports a variety of error codes. Most of those, with the exception of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual EC error code gets lost. Introduce cros_ec_map_error() to map EC error codes to Linux error codes, and use it in cros_ec_cmd_xfer_status() to report more meaningful errors to the caller. With this change, callers of cros_ec_cmd_xfer_status() can implement a more distinguished action without having to rely on the EC error code. At the same time, debugging is improved in situations where the Linux error code is reported to userspace and/or in the kernel log.
---
v4: Added Brian's Reviewed-by: tag
v3: Use -ENOPROTOOPT for EC_RES_INVALID_VERSION
Implement function to convert error codes
v2: No change
drivers/platform/chrome/cros_ec_proto.c | 52 ++++++++++++++++++++----- 1 file changed, 42 insertions(+), 10 deletions(-)
drivers/platform/chrome/cros_ec_proto.c +42 -10
@@ -15,6 +15,43 @@#define EC_COMMAND_RETRIES 50 +static const int cros_ec_error_map[] = { + [EC_RES_INVALID_COMMAND ] = -EOPNOTSUPP , + [EC_RES_ERROR ] = -EIO , + [EC_RES_INVALID_PARAM ] = -EINVAL , + [EC_RES_ACCESS_DENIED ] = -EACCES , + [EC_RES_INVALID_RESPONSE ] = -EPROTO , + [EC_RES_INVALID_VERSION ] = -ENOPROTOOPT , + [EC_RES_INVALID_CHECKSUM ] = -EBADMSG , + [EC_RES_IN_PROGRESS ] = -EINPROGRESS , + [EC_RES_UNAVAILABLE ] = -ENODATA , + [EC_RES_TIMEOUT ] = -ETIMEDOUT , + [EC_RES_OVERFLOW ] = -EOVERFLOW , + [EC_RES_INVALID_HEADER ] = -EBADR , + [EC_RES_REQUEST_TRUNCATED ] = -EBADR , + [EC_RES_RESPONSE_TOO_BIG ] = -EFBIG , + [EC_RES_BUS_ERROR ] = -EFAULT , + [EC_RES_BUSY ] = -EBUSY , + [EC_RES_INVALID_HEADER_VERSION ] = -EBADMSG , + [EC_RES_INVALID_HEADER_CRC ] = -EBADMSG , + [EC_RES_INVALID_DATA_CRC ] = -EBADMSG , + [EC_RES_DUP_UNAVAILABLE ] = -ENODATA , +}; + +static int cros_ec_map_error (uint32_t result) +{ +int ret =0 ; + +if (result !=EC_RES_SUCCESS ) { +if (result <ARRAY_SIZE (cros_ec_error_map) && cros_ec_error_map[result]) + ret = cros_ec_error_map[result]; +else + ret = -EPROTO ; + } + +return ret; +} +static int prepare_packet (struct cros_ec_device *ec_dev,struct cros_ec_command *msg) {
@@ -555,8 +592,7 @@ EXPORT_SYMBOL(cros_ec_cmd_xfer);* * Return: * >=0 - The number of bytes transferred -* -ENOPROTOOPT - Operation not supported -* -EPROTO - Protocol error +* <0 - Linux error code */ int cros_ec_cmd_xfer_status (struct cros_ec_device *ec_dev,struct cros_ec_command *msg)
@@ -566,15 +602,11 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, ret =cros_ec_cmd_xfer (ec_dev, msg);if (ret <0 ) {dev_err (ec_dev->dev,"Command xfer error (err:%d)\n" , ret); - }else if (msg->result ==EC_RES_INVALID_VERSION ) { -dev_dbg (ec_dev->dev,"Command invalid version (err:%d)\n" , - msg->result); -return -ENOPROTOOPT ; - }else if (msg->result !=EC_RES_SUCCESS ) { -dev_dbg (ec_dev->dev,"Command result (err: %d)\n" , msg->result); -return -EPROTO ; + }else { + ret =cros_ec_map_error (msg->result); +if (ret) +dev_dbg (ec_dev->dev,"Command result (err: %d [%d])\n" , msg->result, ret); } -return ret; }EXPORT_SYMBOL (cros_ec_cmd_xfer_status);
Signature · 1 line
2.17.1
PATCH v4 7/7 pwm: cros-ec: Simplify EC error handling
In reply to Guenter RoeckWith enhanced error reporting from cros_ec_cmd_xfer_status() in place, we can fully use it and no longer rely on EC error codes.
--- drivers/pwm/pwm-cros-ec.c | 26 ++++---------------------- 1 file changed, 4 insertions(+), 22 deletions(-)
drivers/pwm/pwm-cros-ec.c +4 -22
@@ -81,8 +81,7 @@ static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)return cros_ec_cmd_xfer_status (ec, msg); } -static int __cros_ec_pwm_get_duty (struct cros_ec_device *ec,u8 index, -u32 *result) +static int cros_ec_pwm_get_duty (struct cros_ec_device *ec,u8 index) {struct {struct cros_ec_command msg;
@@ -107,19 +106,12 @@ static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index, params->index = index; ret =cros_ec_cmd_xfer_status (ec, msg); -if (result) - *result = msg->result;if (ret <0 )return ret;return resp->duty; } -static int cros_ec_pwm_get_duty (struct cros_ec_device *ec,u8 index) -{ -return __cros_ec_pwm_get_duty (ec, index,NULL ); -} -static int cros_ec_pwm_apply (struct pwm_chip *chip,struct pwm_device *pwm,const struct pwm_state *state) {
@@ -215,28 +207,18 @@ static int cros_ec_num_pwms(struct cros_ec_device *ec)/* The index field is only 8 bits */ for (i =0 ; i <=U8_MAX ; i++) { -u32 result =0 ; - - ret =__cros_ec_pwm_get_duty (ec, i, &result); + ret =cros_ec_pwm_get_duty (ec, i);/* * We look for SUCCESS, INVALID_COMMAND, or INVALID_PARAM * responses; everything else is treated as an error. -* The EC error codes either map to -EOPNOTSUPP / -EINVAL, -* or -EPROTO is returned and the EC error is in the result -* field. Check for both. +* The EC error codes map to -EOPNOTSUPP and -EINVAL, +* so check for those. */ switch (ret) {case -EOPNOTSUPP :/* invalid command */ return -ENODEV ;case -EINVAL :/* invalid parameter */ return i; -case -EPROTO : -/* Old or new error return code: Handle both */ -if (result ==EC_RES_INVALID_COMMAND ) -return -ENODEV ; -else if (result ==EC_RES_INVALID_PARAM ) -return i; -return -EPROTO ;default :if (ret <0 )return ret;
Signature · 1 line
2.17.1
Re: [PATCH v4 7/7] pwm: cros-ec: Simplify EC error handling
Quoted 4 lines · Guenter Roeck
With enhanced error reporting from
cros_ec_cmd_xfer_status()in place, we can fully use it and no longer rely on EC error codes.Signed-off-by Guenter Roeck <[email protected]>
Thanks
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
Re: [PATCH v4 7/7] pwm: cros-ec: Simplify EC error handling
In reply to Guenter RoeckQuoted 5 lines · Guenter Roeck
With enhanced error reporting from
cros_ec_cmd_xfer_status()in place, we can fully use it and no longer rely on EC error codes.Signed-off-by Guenter Roeck <[email protected]>
Hi Guenter et all,
Quoted 31 lines · Guenter Roeck
The EC reports a variety of error codes. Most of those, with the exception of
EC_RES_INVALID_VERSION, are converted to-EPROTO. As result, the actual error code gets lost. Incros_ec_cmd_xfer_status(), convert all EC errors to Linux error codes to report a more meaningful error to the caller to aid debugging.To prepare for this change, handle error codes other than
-EPROTOfor all callers ofcros_ec_cmd_xfer_status(). Specifically, no longer assume that-EPROTOreflects an error from the EC and all other error codes reflect a transfer error.v2: Add patches 1/4 to 3/4 to handle callers of
cros_ec_cmd_xfer_status()
v3: Add patches 4/6 and 5/6 to handle additional callers of
cros_ec_cmd_xfer_status()
Use-ENOPROTOOPTforEC_RES_INVALID_VERSION
Implement function to convert error codes
v4: Add coments describing the functionality ofcros_ec_num_pwms().
Add patch 7/7 to clean upcros_ec_num_pwms()after the new error code support has been implemented.
Rebased series to v5.8.----------------------------------------------------------------
Guenter Roeck (7):
iio:cros_ec: Accept-EOPNOTSUPPas 'not supported' error code
cros_ec_lightbar: Accept more error codes fromcros_ec_cmd_xfer_statusplatform/chrome:cros_ec_sysfs: Report range of error codes from EC
pwm: cros-ec: Accept more error codes fromcros_ec_cmd_xfer_statusplatform/input:cros_ec: Replace-ENOTSUPPwith-ENOPROTOOPTplatform/chrome:cros_ec_proto: Convert EC error codes to Linux error codes
pwm: cros-ec: Simplify EC error handling
Quoted 8 lines
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 2 +- drivers/input/keyboard/cros_ec_keyb.c | 2 +- drivers/platform/chrome/cros_ec_lightbar.c | 10 ++--- drivers/platform/chrome/cros_ec_proto.c | 52 +++++++++++++++++----- drivers/platform/chrome/cros_ec_sysfs.c | 24 ++++------ drivers/pwm/pwm-cros-ec.c | 37 +++++++-------- 6 files changed, 74 insertions(+), 53 deletions(-)
The patches LGTM, and if the other maintainers are fine, I'd like to queue all these through the chrome-platform tree.
I noticed, thought, that KernelCI reported a regression on Kevin that I'll try to debug at the beginning of next week.
[ 3.821203] cros-ec-spi spi2.0: Wrong size 1/3: 0 != 4 [ 3.827320] cros-ec-keyb ff200000.spi:ec@0:keyboard-controller: cannot register non-matrix inputs: -71 [ 3.838506] cros-ec-keyb: probe of ff200000.spi:ec@0:keyboard-controller failed with error -71 [ 3.853492] cros-ec-spi spi2.0: Chrome EC device registered
Thanks,
Enric
Quoted 49 lines · Enric Balletbo i Serra
Hi Guenter et all,
Quoted 31 lines · Guenter Roeck
The EC reports a variety of error codes. Most of those, with the exception of
EC_RES_INVALID_VERSION, are converted to-EPROTO. As result, the actual error code gets lost. Incros_ec_cmd_xfer_status(), convert all EC errors to Linux error codes to report a more meaningful error to the caller to aid debugging.To prepare for this change, handle error codes other than
-EPROTOfor all callers ofcros_ec_cmd_xfer_status(). Specifically, no longer assume that-EPROTOreflects an error from the EC and all other error codes reflect a transfer error.v2: Add patches 1/4 to 3/4 to handle callers of
cros_ec_cmd_xfer_status()
v3: Add patches 4/6 and 5/6 to handle additional callers of
cros_ec_cmd_xfer_status()
Use-ENOPROTOOPTforEC_RES_INVALID_VERSION
Implement function to convert error codes
v4: Add coments describing the functionality ofcros_ec_num_pwms().
Add patch 7/7 to clean upcros_ec_num_pwms()after the new error code support has been implemented.
Rebased series to v5.8.----------------------------------------------------------------
Guenter Roeck (7):
iio:cros_ec: Accept-EOPNOTSUPPas 'not supported' error code
cros_ec_lightbar: Accept more error codes fromcros_ec_cmd_xfer_statusplatform/chrome:cros_ec_sysfs: Report range of error codes from EC
pwm: cros-ec: Accept more error codes fromcros_ec_cmd_xfer_statusplatform/input:cros_ec: Replace-ENOTSUPPwith-ENOPROTOOPTplatform/chrome:cros_ec_proto: Convert EC error codes to Linux error codes
pwm: cros-ec: Simplify EC error handlingQuoted 8 lines
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 2 +- drivers/input/keyboard/cros_ec_keyb.c | 2 +- drivers/platform/chrome/cros_ec_lightbar.c | 10 ++--- drivers/platform/chrome/cros_ec_proto.c | 52 +++++++++++++++++----- drivers/platform/chrome/cros_ec_sysfs.c | 24 ++++------ drivers/pwm/pwm-cros-ec.c | 37 +++++++-------- 6 files changed, 74 insertions(+), 53 deletions(-)The patches LGTM, and if the other maintainers are fine, I'd like to queue all these through the chrome-platform tree.
I noticed, thought, that KernelCI reported a regression on Kevin that I'll try to debug at the beginning of next week.
Quoted 7 lines
[ 3.821203] cros-ec-spi spi2.0: Wrong size 1/3: 0 != 4 [ 3.827320] cros-ec-keyb ff200000.spi:ec@0:keyboard-controller: cannot register non-matrix inputs: -71 [ 3.838506] cros-ec-keyb: probe of ff200000.spi:ec@0:keyboard-controller failed with error -71 [ 3.853492] cros-ec-spi spi2.0: Chrome EC device registered
Easy to debug. cros_ec_cmd_xfer_status() now returns 0 for success and < 0 for errors. It needs to return the receive length if there is no error. I'll send v5 with a fix, and sorry for the trouble.
Thanks,
Guenter