Misc fixes/cleanup
cover Misc fixes/cleanup
These are some miscelleneous fixes which can be applied separately from each other. I have grouped them in the same series, but they do not depend on one another.
Sean Anderson (3):
doc: Fix typo in FIT documentation
spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
spi: Fix typo in header
doc/uImage.FIT/source_file_format.txt | 2 +- drivers/spi/spi-mem.c | 283 -------------------------- include/spi.h | 2 +- 3 files changed, 2 insertions(+), 285 deletions(-)
Signature · 1 line
2.28.0
PATCH 1/3 doc: Fix typo in FIT documentation
u_boot should be u-boot
---
doc/uImage.FIT/source_file_format.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
doc/uImage.FIT/source_file_format.txt +1 -1
@@ -172,7 +172,7 @@ the '/images' node should have the following layout: - os : OS name, mandatory for types "kernel" and "ramdisk". Valid OS names are: "openbsd", "netbsd", "freebsd", "4_4bsd", "linux", "svr4", "esix", "solaris", "irix", "sco", "dell", "ncr", "lynxos", "vxworks", "psos", "qnx", - "u_boot", "rtems", "unity", "integrity". + "u-boot", "rtems", "unity", "integrity". - arch : Architecture name, mandatory for types: "standalone", "kernel", "firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha", "arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
Signature · 1 line
2.28.0
PATCH 2/3 spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
In reply to Sean AndersonPreprocessing out large sections of the file is confusing and makes it difficult to follow the control flow. Presumably these were initially added to make porting easier, but this code has not been synced with Linux since it was introduced two years ago.
---
drivers/spi/spi-mem.c | 283 ------------------------------------------ 1 file changed, 283 deletions(-)
drivers/spi/spi-mem.c +0 -283
@@ -6,109 +6,8 @@* Author: Boris Brezillon <[email protected]> */ -#ifndef __UBOOT__ -#include <log.h> -#include <dm/devres.h> -#include <linux/dmaengine.h> -#include <linux/pm_runtime.h> -#include "internals.h" -#else -#include <common.h> -#include <dm.h> -#include <errno.h> -#include <malloc.h> -#include <spi.h> #include <spi.h> #include <spi-mem.h> -#include <dm/device_compat.h> -#endif - -#ifndef __UBOOT__ -/** -* spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a -* memory operation -* @ctlr: the SPI controller requesting this dma_map() -* @op: the memory operation containing the buffer to map -* @sgt: a pointer to a non-initialized sg_table that will be filled by this -* function -* -* Some controllers might want to do DMA on the data buffer embedded in @op. -* This helper prepares everything for you and provides a ready-to-use -* sg_table. This function is not intended to be called from spi drivers. -* Only SPI controller drivers should use it. -* Note that the caller must ensure the memory region pointed by -* op->data.buf.{in,out} is DMA-able before calling this function. -* -* Return: 0 in case of success, a negative error code otherwise. -*/ -int spi_controller_dma_map_mem_op_data (struct spi_controller *ctlr, -const struct spi_mem_op *op, -struct sg_table *sgt) -{ -struct device *dmadev; - -if (!op->data.nbytes) -return -EINVAL ; - -if (op->data.dir ==SPI_MEM_DATA_OUT && ctlr->dma_tx) - dmadev = ctlr->dma_tx->device->dev; -else if (op->data.dir ==SPI_MEM_DATA_IN && ctlr->dma_rx) - dmadev = ctlr->dma_rx->device->dev; -else - dmadev = ctlr->dev.parent; - -if (!dmadev) -return -EINVAL ; - -return spi_map_buf (ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes, - op->data.dir ==SPI_MEM_DATA_IN ? -DMA_FROM_DEVICE :DMA_TO_DEVICE ); -} -EXPORT_SYMBOL_GPL (spi_controller_dma_map_mem_op_data); - -/** -* spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a -* memory operation -* @ctlr: the SPI controller requesting this dma_unmap() -* @op: the memory operation containing the buffer to unmap -* @sgt: a pointer to an sg_table previously initialized by -* spi_controller_dma_map_mem_op_data() -* -* Some controllers might want to do DMA on the data buffer embedded in @op. -* This helper prepares things so that the CPU can access the -* op->data.buf.{in,out} buffer again. -* -* This function is not intended to be called from SPI drivers. Only SPI -* controller drivers should use it. -* -* This function should be called after the DMA operation has finished and is -* only valid if the previous spi_controller_dma_map_mem_op_data() call -* returned 0. -* -* Return: 0 in case of success, a negative error code otherwise. -*/ -void spi_controller_dma_unmap_mem_op_data (struct spi_controller *ctlr, -const struct spi_mem_op *op, -struct sg_table *sgt) -{ -struct device *dmadev; - -if (!op->data.nbytes) -return ; - -if (op->data.dir ==SPI_MEM_DATA_OUT && ctlr->dma_tx) - dmadev = ctlr->dma_tx->device->dev; -else if (op->data.dir ==SPI_MEM_DATA_IN && ctlr->dma_rx) - dmadev = ctlr->dma_rx->device->dev; -else - dmadev = ctlr->dev.parent; - -spi_unmap_buf (ctlr, dmadev, sgt, - op->data.dir ==SPI_MEM_DATA_IN ? -DMA_FROM_DEVICE :DMA_TO_DEVICE ); -} -EXPORT_SYMBOL_GPL (spi_controller_dma_unmap_mem_op_data); -#endif /* __UBOOT__ */ static int spi_check_buswidth_req (struct spi_slave *slave,u8 buswidth,bool tx) {
@@ -166,7 +65,6 @@ bool spi_mem_default_supports_op(struct spi_slave *slave,return true; } -EXPORT_SYMBOL_GPL (spi_mem_default_supports_op);/** * spi_mem_supports_op() - Check if a memory device and the controller it is
@@ -194,7 +92,6 @@ bool spi_mem_supports_op(struct spi_slave *slave,return spi_mem_default_supports_op (slave, op); } -EXPORT_SYMBOL_GPL (spi_mem_supports_op);/** * spi_mem_exec_op() - Execute a memory operation
@@ -228,36 +125,8 @@ int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)return ret;if (ops->mem_ops && ops->mem_ops->exec_op) { -#ifndef __UBOOT__ -/* -* Flush the message queue before executing our SPI memory -* operation to prevent preemption of regular SPI transfers. -*/ -spi_flush_queue (ctlr); - -if (ctlr->auto_runtime_pm) { - ret =pm_runtime_get_sync (ctlr->dev.parent); -if (ret <0 ) { -dev_err (&ctlr->dev, -"Failed to power device: %d\n" , - ret); -return ret; - } - } - -mutex_lock (&ctlr->bus_lock_mutex); -mutex_lock (&ctlr->io_mutex); -#endif ret = ops->mem_ops->exec_op (slave, op); -#ifndef __UBOOT__ -mutex_unlock (&ctlr->io_mutex); -mutex_unlock (&ctlr->bus_lock_mutex); - -if (ctlr->auto_runtime_pm) -pm_runtime_put (ctlr->dev.parent); -#endif -/* * Some controllers only optimize specific paths (typically the * read path) and expect the core to use the regular SPI
@@ -269,80 +138,6 @@ int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op) } } -#ifndef __UBOOT__ - tmpbufsize =sizeof (op->cmd.opcode) + op->addr.nbytes + - op->dummy.nbytes; - -/* -* Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so -* we're guaranteed that this buffer is DMA-able, as required by the -* SPI layer. -*/ - tmpbuf =kzalloc (tmpbufsize,GFP_KERNEL |GFP_DMA ); -if (!tmpbuf) -return -ENOMEM ; - -spi_message_init (&msg); - - tmpbuf[0 ] = op->cmd.opcode; - xfers[xferpos].tx_buf = tmpbuf; - xfers[xferpos].len =sizeof (op->cmd.opcode); - xfers[xferpos].tx_nbits = op->cmd.buswidth; -spi_message_add_tail (&xfers[xferpos], &msg); - xferpos++; - totalxferlen++; - -if (op->addr.nbytes) { -int i; - -for (i =0 ; i < op->addr.nbytes; i++) - tmpbuf[i +1 ] = op->addr.val >> - (8 * (op->addr.nbytes - i -1 )); - - xfers[xferpos].tx_buf = tmpbuf +1 ; - xfers[xferpos].len = op->addr.nbytes; - xfers[xferpos].tx_nbits = op->addr.buswidth; -spi_message_add_tail (&xfers[xferpos], &msg); - xferpos++; - totalxferlen += op->addr.nbytes; - } - -if (op->dummy.nbytes) { -memset (tmpbuf + op->addr.nbytes +1 ,0xff , op->dummy.nbytes); - xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes +1 ; - xfers[xferpos].len = op->dummy.nbytes; - xfers[xferpos].tx_nbits = op->dummy.buswidth; -spi_message_add_tail (&xfers[xferpos], &msg); - xferpos++; - totalxferlen += op->dummy.nbytes; - } - -if (op->data.nbytes) { -if (op->data.dir ==SPI_MEM_DATA_IN ) { - xfers[xferpos].rx_buf = op->data.buf.in; - xfers[xferpos].rx_nbits = op->data.buswidth; - }else { - xfers[xferpos].tx_buf = op->data.buf.out; - xfers[xferpos].tx_nbits = op->data.buswidth; - } - - xfers[xferpos].len = op->data.nbytes; -spi_message_add_tail (&xfers[xferpos], &msg); - xferpos++; - totalxferlen += op->data.nbytes; - } - - ret =spi_sync (slave, &msg); - -kfree (tmpbuf); - -if (ret) -return ret; - -if (msg.actual_length != totalxferlen) -return -EIO ; -#else -if (op->data.nbytes) {if (op->data.dir ==SPI_MEM_DATA_IN ) rx_buf = op->data.buf.in;
@@ -407,11 +202,9 @@ int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)if (ret <0 )return ret; -#endif /* __UBOOT__ */ return 0 ; } -EXPORT_SYMBOL_GPL (spi_mem_exec_op);/** * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to
@@ -459,79 +252,3 @@ int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)return 0 ; } -EXPORT_SYMBOL_GPL (spi_mem_adjust_op_size); - -#ifndef __UBOOT__ -static inline struct spi_mem_driver *to_spi_mem_drv (struct device_driver *drv) -{ - return container_of(drv, struct spi_mem_driver, spidrv.driver); -} - -static int spi_mem_probe (struct spi_device *spi) -{ -struct spi_mem_driver *memdrv =to_spi_mem_drv (spi->dev.driver); -struct spi_mem *mem; - - mem =devm_kzalloc (&spi->dev,sizeof (*mem),GFP_KERNEL ); -if (!mem) -return -ENOMEM ; - - mem->spi = spi; -spi_set_drvdata (spi, mem); - -return memdrv->probe (mem); -} - -static int spi_mem_remove (struct spi_device *spi) -{ -struct spi_mem_driver *memdrv =to_spi_mem_drv (spi->dev.driver); -struct spi_mem *mem =spi_get_drvdata (spi); - -if (memdrv->remove) -return memdrv->remove (mem); - -return 0 ; -} - -static void spi_mem_shutdown (struct spi_device *spi) -{ -struct spi_mem_driver *memdrv =to_spi_mem_drv (spi->dev.driver); -struct spi_mem *mem =spi_get_drvdata (spi); - -if (memdrv->shutdown) - memdrv->shutdown (mem); -} - -/** -* spi_mem_driver_register_with_owner() - Register a SPI memory driver -* @memdrv: the SPI memory driver to register -* @owner: the owner of this driver -* -* Registers a SPI memory driver. -* -* Return: 0 in case of success, a negative error core otherwise. -*/ - -int spi_mem_driver_register_with_owner (struct spi_mem_driver *memdrv, -struct module *owner) -{ - memdrv->spidrv.probe = spi_mem_probe; - memdrv->spidrv.remove = spi_mem_remove; - memdrv->spidrv.shutdown = spi_mem_shutdown; - -return __spi_register_driver (owner, &memdrv->spidrv); -} -EXPORT_SYMBOL_GPL (spi_mem_driver_register_with_owner); - -/** -* spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver -* @memdrv: the SPI memory driver to unregister -* -* Unregisters a SPI memory driver. -*/ -void spi_mem_driver_unregister (struct spi_mem_driver *memdrv) -{ -spi_unregister_driver (&memdrv->spidrv); -} -EXPORT_SYMBOL_GPL (spi_mem_driver_unregister); -#endif /* __UBOOT__ */
Signature · 1 line
2.28.0
PATCH 2/3 spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
Hi Sean,
Quoted 1 line
Subject: [PATCH 2/3] spi: Remove uses of #ifdef
__U_BOOT__fromspi-mem.c
Maybe s/ifdef/ifndef/
Quoted 24 lines · Sean Anderson
Preprocessing out large sections of the file is confusing and makes it difficult to follow the control flow. Presumably these were initially added to make porting easier, but this code has not been synced with Linux since it was introduced two years ago.
Signed-off-by Sean Anderson <[email protected]>---
drivers/spi/spi-mem.c | 283 ------------------------------------------ 1 file changed, 283 deletions(-)drivers/spi/spi-mem.c +0
-5@@ -6,109 +6,8 @@* Author: Boris Brezillon <[email protected]> */ -#ifndef __UBOOT__ -#include <log.h> -#include <dm/devres.h> -#include <linux/dmaengine.h> -#include <linux/pm_runtime.h>
drivers/spi/spi-mem.c line 23
Quoted 10 lines
drivers/spi/spi-mem.c +0
-8-#include "internals.h" -#else -#include <common.h> -#include <dm.h> -#include <errno.h> -#include <malloc.h> -#include <spi.h> #include <spi.h> #include <spi-mem.h> -#include <dm/device_compat.h>
Why remove these headers? They are not part of a #ifndef __UBOOT__. The build fails with this patch applied on latest master:
drivers/spi/spi-mem.c: In function ?spi_mem_supports_op?:
drivers/spi/spi-mem.c:87:34: error: dereferencing pointer to incomplete type ?struct udevice?
struct udevice *bus = slave->dev->parent;
^~
drivers/spi/spi-mem.c: In function ?spi_mem_exec_op?:
drivers/spi/spi-mem.c:195:3: warning: implicit declaration of function ?debug?; did you mean ?pr_debug?? [-Wimplicit-function-declaration]
debug("%02x ", op_buf[i]);
^~~~~
pr_debugQuoted 92 lines
drivers/spi/spi-mem.c +0
-88-#endif - -#ifndef __UBOOT__ -/** -* spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a -* memory operation -* @ctlr: the SPI controller requesting this dma_map() -* @op: the memory operation containing the buffer to map -* @sgt: a pointer to a non-initialized sg_table that will be filled by this -* function -* -* Some controllers might want to do DMA on the data buffer embedded in @op. -* This helper prepares everything for you and provides a ready-to-use -* sg_table. This function is not intended to be called from spi drivers. -* Only SPI controller drivers should use it. -* Note that the caller must ensure the memory region pointed by -* op->data.buf.{in,out} is DMA-able before calling this function. -* -* Return: 0 in case of success, a negative error code otherwise. -*/ -int spi_controller_dma_map_mem_op_data (struct spi_controller *ctlr, -const struct spi_mem_op *op, -struct sg_table *sgt) -{ -struct device *dmadev; - -if (!op->data.nbytes) -return -EINVAL ; - -if (op->data.dir ==SPI_MEM_DATA_OUT && ctlr->dma_tx) - dmadev = ctlr->dma_tx->device->dev; -else if (op->data.dir ==SPI_MEM_DATA_IN && ctlr->dma_rx) - dmadev = ctlr->dma_rx->device->dev; -else - dmadev = ctlr->dev.parent; - -if (!dmadev) -return -EINVAL ; - -return spi_map_buf (ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes, - op->data.dir ==SPI_MEM_DATA_IN ? -DMA_FROM_DEVICE :DMA_TO_DEVICE ); -} -EXPORT_SYMBOL_GPL (spi_controller_dma_map_mem_op_data); - -/** -* spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a -* memory operation -* @ctlr: the SPI controller requesting this dma_unmap() -* @op: the memory operation containing the buffer to unmap -* @sgt: a pointer to an sg_table previously initialized by -* spi_controller_dma_map_mem_op_data() -* -* Some controllers might want to do DMA on the data buffer embedded in @op. -* This helper prepares things so that the CPU can access the -* op->data.buf.{in,out} buffer again. -* -* This function is not intended to be called from SPI drivers. Only SPI -* controller drivers should use it. -* -* This function should be called after the DMA operation has finished and is -* only valid if the previous spi_controller_dma_map_mem_op_data() call -* returned 0. -* -* Return: 0 in case of success, a negative error code otherwise. -*/ -void spi_controller_dma_unmap_mem_op_data (struct spi_controller *ctlr, -const struct spi_mem_op *op, -struct sg_table *sgt) -{ -struct device *dmadev; - -if (!op->data.nbytes) -return ; - -if (op->data.dir ==SPI_MEM_DATA_OUT && ctlr->dma_tx) - dmadev = ctlr->dma_tx->device->dev; -else if (op->data.dir ==SPI_MEM_DATA_IN && ctlr->dma_rx) - dmadev = ctlr->dma_rx->device->dev; -else - dmadev = ctlr->dev.parent; - -spi_unmap_buf (ctlr, dmadev, sgt, - op->data.dir ==SPI_MEM_DATA_IN ? -DMA_FROM_DEVICE :DMA_TO_DEVICE ); -} -EXPORT_SYMBOL_GPL (spi_controller_dma_unmap_mem_op_data); -#endif /* __UBOOT__ */ static int spi_check_buswidth_req (struct spi_slave *slave,u8 buswidth,bool tx) {
drivers/spi/spi-mem.c bool spi_mem_default_supports_op(struct spi_slave *slave, · line 169
Quoted 4 lines
drivers/spi/spi-mem.c +0
-1@@ -166,7 +65,6 @@ bool spi_mem_default_supports_op(struct spi_slave *slave,return true; } -EXPORT_SYMBOL_GPL (spi_mem_default_supports_op);
Nitpick: Since this patch is about removing things in #ifndef __UBOOT_, please don't remove things outside of it. Do them as a separate patch instead. Same for all other places below.
I am neither endorsing this patch nor opposing it, but please at least make sure it builds.
Signature · 3 lines
Regards, Pratyush Yadav Texas Instruments India
PATCH 2/3 spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
Quoted 5 lines · Pratyush Yadav
Hi Sean,
Quoted 1 line
Subject: [PATCH 2/3] spi: Remove uses of #ifdef
__U_BOOT__fromspi-mem.cMaybe s/ifdef/ifndef/
Sure.
Quoted 31 lines · Sean Anderson
Quoted 29 lines
Preprocessing out large sections of the file is confusing and makes it difficult to follow the control flow. Presumably these were initially added to make porting easier, but this code has not been synced with Linux since it was introduced two years ago.
Signed-off-by Sean Anderson <[email protected]>---
drivers/spi/spi-mem.c | 283 ------------------------------------------ 1 file changed, 283 deletions(-)drivers/spi/spi-mem.c +0
-10@@ -6,109 +6,8 @@* Author: Boris Brezillon <[email protected]> */ -#ifndef __UBOOT__ -#include <log.h> -#include <dm/devres.h> -#include <linux/dmaengine.h> -#include <linux/pm_runtime.h> -#include "internals.h" -#else -#include <common.h> -#include <dm.h> -#include <errno.h>
Quoted 8 lines
drivers/spi/spi-mem.c line 23
Quoted 5 lines
drivers/spi/spi-mem.c +0
-3-#include <malloc.h> -#include <spi.h> #include <spi.h> #include <spi-mem.h> -#include <dm/device_compat.h> Why remove these headers? They are not part of a #ifndef
__UBOOT__. The build fails with this patch applied on latest master:
Hm, I'm not sure how those got deleted. I originally planned to submit this in another series, so perhaps I made an error when cherry-picking. I will resubmit this with those headers included.
Quoted 104 lines
drivers/spi/spi-mem.c: In function ?spi_mem_supports_op?:
drivers/spi/spi-mem.c:87:34: error: dereferencing pointer to incomplete type ?struct udevice?struct udevice *bus = slave->dev->parent; ^~ drivers/spi/spi-mem.c: In function ?spi_mem_exec_op?: drivers/spi/spi-mem.c:195:3: warning: implicit declaration of function ?debug?; did you mean ?pr_debug?? [-Wimplicit-function-declaration] debug("%02x ", op_buf[i]); ^~~~~ pr_debugQuoted 93 lines
drivers/spi/spi-mem.c +0
-88-#endif - -#ifndef __UBOOT__ -/** -* spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a -* memory operation -* @ctlr: the SPI controller requesting this dma_map() -* @op: the memory operation containing the buffer to map -* @sgt: a pointer to a non-initialized sg_table that will be filled by this -* function -* -* Some controllers might want to do DMA on the data buffer embedded in @op. -* This helper prepares everything for you and provides a ready-to-use -* sg_table. This function is not intended to be called from spi drivers. -* Only SPI controller drivers should use it. -* Note that the caller must ensure the memory region pointed by -* op->data.buf.{in,out} is DMA-able before calling this function. -* -* Return: 0 in case of success, a negative error code otherwise. -*/ -int spi_controller_dma_map_mem_op_data (struct spi_controller *ctlr, -const struct spi_mem_op *op, -struct sg_table *sgt) -{ -struct device *dmadev; - -if (!op->data.nbytes) -return -EINVAL ; - -if (op->data.dir ==SPI_MEM_DATA_OUT && ctlr->dma_tx) - dmadev = ctlr->dma_tx->device->dev; -else if (op->data.dir ==SPI_MEM_DATA_IN && ctlr->dma_rx) - dmadev = ctlr->dma_rx->device->dev; -else - dmadev = ctlr->dev.parent; - -if (!dmadev) -return -EINVAL ; - -return spi_map_buf (ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes, - op->data.dir ==SPI_MEM_DATA_IN ? -DMA_FROM_DEVICE :DMA_TO_DEVICE ); -} -EXPORT_SYMBOL_GPL (spi_controller_dma_map_mem_op_data); - -/** -* spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a -* memory operation -* @ctlr: the SPI controller requesting this dma_unmap() -* @op: the memory operation containing the buffer to unmap -* @sgt: a pointer to an sg_table previously initialized by -* spi_controller_dma_map_mem_op_data() -* -* Some controllers might want to do DMA on the data buffer embedded in @op. -* This helper prepares things so that the CPU can access the -* op->data.buf.{in,out} buffer again. -* -* This function is not intended to be called from SPI drivers. Only SPI -* controller drivers should use it. -* -* This function should be called after the DMA operation has finished and is -* only valid if the previous spi_controller_dma_map_mem_op_data() call -* returned 0. -* -* Return: 0 in case of success, a negative error code otherwise. -*/ -void spi_controller_dma_unmap_mem_op_data (struct spi_controller *ctlr, -const struct spi_mem_op *op, -struct sg_table *sgt) -{ -struct device *dmadev; - -if (!op->data.nbytes) -return ; - -if (op->data.dir ==SPI_MEM_DATA_OUT && ctlr->dma_tx) - dmadev = ctlr->dma_tx->device->dev; -else if (op->data.dir ==SPI_MEM_DATA_IN && ctlr->dma_rx) - dmadev = ctlr->dma_rx->device->dev; -else - dmadev = ctlr->dev.parent; - -spi_unmap_buf (ctlr, dmadev, sgt, - op->data.dir ==SPI_MEM_DATA_IN ? -DMA_FROM_DEVICE :DMA_TO_DEVICE ); -} -EXPORT_SYMBOL_GPL (spi_controller_dma_unmap_mem_op_data); -#endif /* __UBOOT__ */ static int spi_check_buswidth_req (struct spi_slave *slave,u8 buswidth,bool tx) {@@ -166,7 +65,6 @@ bool spi_mem_default_supports_op(struct spi_slave *slave,
Quoted 7 lines
drivers/spi/spi-mem.c bool spi_mem_default_supports_op(struct spi_slave *slave, · line 169
Quoted 3 lines
drivers/spi/spi-mem.c +0
-1return true; } -EXPORT_SYMBOL_GPL (spi_mem_default_supports_op);Nitpick: Since this patch is about removing things in #ifndef
__UBOOT_, please don't remove things outside of it. Do them as a separate patch instead. Same for all other places below.
Ok, I can move the removal of these lines to its own patch.
Quoted 4 lines
I am neither endorsing this patch nor opposing it, but please at least make sure it builds.
Thanks for the feedback.
--Sean
PATCH 3/3 spi: Fix typo in header
In reply to Sean AndersonSpelling.
---
include/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/spi.h +1 -1
@@ -51,7 +51,7 @@ struct dm_spi_bus {* struct from a spi_slave, use dev_get_parent_platdata(dev) or * dev_get_parent_platdata(slave->dev). * -* This data is immuatable. Each time the device is probed, @max_hz and @mode +* This data is immutable. Each time the device is probed, @max_hz and @mode * will be copied to struct spi_slave. * * @cs: Chip select number (0..n-1)
Signature · 1 line
2.28.0