Skip to contentSkip to conversation

drm/tilcdc: fix leak & null ref in panel_connector_get_modes

PATCH New Sasha Levin 1 participant 31 messages Aug 10, 2020

Subsystems (16)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/31 drm/tilcdc: fix leak & null ref in panel_connector_get_modes

From: Tomi Valkeinen <[email protected]>

[ Upstream commit 3f9c1c872cc97875ddc8d63bc9fe6ee13652b933 ]

If videomode_from_timings() returns true, the mode allocated with drm_mode_create will be leaked.

Also, the return value of drm_mode_create() is never checked, and thus could cause NULL deref.

Fix these two issues.

---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/tilcdc/tilcdc_panel.c +5 -1
index a1acab39d87f4..096a33f12c615 100644
@@ -150,12 +150,16 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 	int i;
 
 	for (i = 0; i < timings->num_timings; i++) {
-		struct drm_display_mode *mode = drm_mode_create(dev);
+		struct drm_display_mode *mode;
 		struct videomode vm;
 
 		if (videomode_from_timings(timings, &vm, i))
 			break;
 
+		mode = drm_mode_create(dev);
+		if (!mode)
+			break;
+
 		drm_display_mode_from_videomode(&vm, mode);
 
 		mode->type = DRM_MODE_TYPE_DRIVER;
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#1 lore raw

PATCH 2/31 soc: qcom: rpmh-rsc: Set suppress_bind_attrs flag

From: Maulik Shah <[email protected]>

[ Upstream commit 1a53ce9ab4faeb841b33d62d23283dc76c0e7c5a ]

rpmh-rsc driver is fairly core to system and should not be removable once its probed. However it allows to unbind driver from sysfs using below command which results into a crash on sc7180.

echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind

Lets prevent unbind at runtime by setting suppress_bind_attrs flag.

---
 drivers/soc/qcom/rpmh-rsc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/soc/qcom/rpmh-rsc.c +1 -0
index 3c6f920535eae..519d19f57eee2 100644
@@ -715,6 +715,7 @@ static struct platform_driver rpmh_driver = {
 	.driver = {
 		  .name = "rpmh",
 		  .of_match_table = rpmh_drv_match,
+		  .suppress_bind_attrs = true,
 	},
 };
 
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH 3/31 Bluetooth: add a mutex lock to avoid UAF in do_enale_set

In reply to Sasha Levin

From: Lihong Kou <[email protected]>

[ Upstream commit f9c70bdc279b191da8d60777c627702c06e4a37d ]

In the case we set or free the global value listen_chan in different threads, we can encounter the UAF problems because the method is not protected by any lock, add one to avoid this bug.

BUG: KASAN: use-after-free in l2cap_chan_close+0x48/0x990
net/bluetooth/l2cap_core.c:730
Read of size 8 at addr ffff888096950000 by task kworker/1:102/2868

CPU: 1 PID: 2868 Comm: kworker/1:102 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: events do_enable_set
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1fb/0x318 lib/dump_stack.c:118
 print_address_description+0x74/0x5c0 mm/kasan/report.c:374
 __kasan_report+0x149/0x1c0 mm/kasan/report.c:506
 kasan_report+0x26/0x50 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730
 do_enable_set+0x660/0x900 net/bluetooth/6lowpan.c:1074
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc+0x118/0x1c0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0x221/0x2f0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 l2cap_chan_create+0x50/0x320 net/bluetooth/l2cap_core.c:446
 chan_create net/bluetooth/6lowpan.c:640 [inline]
 bt_6lowpan_listen net/bluetooth/6lowpan.c:959 [inline]
 do_enable_set+0x6a4/0x900 net/bluetooth/6lowpan.c:1078
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x12e/0x1e0 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10d/0x220 mm/slab.c:3757
 l2cap_chan_destroy net/bluetooth/l2cap_core.c:484 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_chan_put+0x170/0x190 net/bluetooth/l2cap_core.c:498
 do_enable_set+0x66c/0x900 net/bluetooth/6lowpan.c:1075
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff888096950000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 0 bytes inside of
 2048-byte region [ffff888096950000, ffff888096950800)
The buggy address belongs to the page:
page:ffffea00025a5400 refcount:1 mapcount:0 mapping:ffff8880aa400e00 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea00027d1548 ffffea0002397808 ffff8880aa400e00
raw: 0000000000000000 ffff888096950000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88809694ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88809694ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096950000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff888096950080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888096950100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
---
 net/bluetooth/6lowpan.c | 5 +++++
 1 file changed, 5 insertions(+)
net/bluetooth/6lowpan.c +5 -0
index 357475cceec61..9a75f9b00b512 100644
@@ -57,6 +57,7 @@ static bool enable_6lowpan;
 /* We are listening incoming connections via this channel
  */
 static struct l2cap_chan *listen_chan;
+static DEFINE_MUTEX(set_lock);
 
 struct lowpan_peer {
 	struct list_head list;
@@ -1082,12 +1083,14 @@ static void do_enable_set(struct work_struct *work)
 
 	enable_6lowpan = set_enable->flag;
 
+	mutex_lock(&set_lock);
 	if (listen_chan) {
 		l2cap_chan_close(listen_chan, 0);
 		l2cap_chan_put(listen_chan);
 	}
 
 	listen_chan = bt_6lowpan_listen();
+	mutex_unlock(&set_lock);
 
 	kfree(set_enable);
 }
@@ -1139,11 +1142,13 @@ static ssize_t lowpan_control_write(struct file *fp,
 		if (ret == -EINVAL)
 			return ret;
 
+		mutex_lock(&set_lock);
 		if (listen_chan) {
 			l2cap_chan_close(listen_chan, 0);
 			l2cap_chan_put(listen_chan);
 			listen_chan = NULL;
 		}
+		mutex_unlock(&set_lock);
 
 		if (conn) {
 			struct lowpan_peer *peer;
Signature · 1 line
2.25.1
author maintainer
#3 lore raw

PATCH 4/31 loop: be paranoid on exit and prevent new additions / removals

In reply to Sasha Levin

From: Luis Chamberlain <[email protected]>

[ Upstream commit 200f93377220504c5e56754823e7adfea6037f1a ]

Be pedantic on removal as well and hold the mutex. This should prevent uses of addition while we exit.

---
 drivers/block/loop.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/block/loop.c +4 -0
index 728681a20b7f4..da68c42aed682 100644
@@ -2279,6 +2279,8 @@ static void __exit loop_exit(void)
 
 	range = max_loop ? max_loop << part_shift : 1UL << MINORBITS;
 
+	mutex_lock(&loop_ctl_mutex);
+
 	idr_for_each(&loop_index_idr, &loop_exit_cb, NULL);
 	idr_destroy(&loop_index_idr);
 
@@ -2286,6 +2288,8 @@ static void __exit loop_exit(void)
 	unregister_blkdev(LOOP_MAJOR, "loop");
 
 	misc_deregister(&loop_misc);
+
+	mutex_unlock(&loop_ctl_mutex);
 }
 
 module_init(loop_init);
Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH 5/31 fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls

In reply to Sasha Levin

From: "Paul E. McKenney" <[email protected]>

[ Upstream commit 9f47eb5461aaeb6cb8696f9d11503ae90e4d5cb0 ]

Very large I/Os can cause the following RCU CPU stall warning:

RIP: 0010:rb_prev+0x8/0x50
Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c =

89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48
RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13
RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0
RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630
RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238
R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001
R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0

 __lookup_extent_mapping+0xa0/0x110
 try_release_extent_mapping+0xdc/0x220
 btrfs_releasepage+0x45/0x70
 shrink_page_list+0xa39/0xb30
 shrink_inactive_list+0x18f/0x3b0
 shrink_lruvec+0x38e/0x6b0
 shrink_node+0x14d/0x690
 do_try_to_free_pages+0xc6/0x3e0
 try_to_free_mem_cgroup_pages+0xe6/0x1e0
 reclaim_high.constprop.73+0x87/0xc0
 mem_cgroup_handle_over_high+0x66/0x150
 exit_to_usermode_loop+0x82/0xd0
 do_syscall_64+0xd4/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

On a PREEMPT=n kernel, the try_release_extent_mapping() function's "while" loop might run for a very long time on a large I/O. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

---
 fs/btrfs/extent_io.c | 2 ++
 1 file changed, 2 insertions(+)
fs/btrfs/extent_io.c +2 -0
index 520b70b543314..fbcd18d96c524 100644
@@ -4270,6 +4270,8 @@ int try_release_extent_mapping(struct page *page, gfp_t mask)
 
 			/* once for us */
 			free_extent_map(em);
+
+			cond_resched(); /* Allow large-extent preemption. */
 		}
 	}
 	return try_release_extent_state(tree, page, mask);
Signature · 1 line
2.25.1
author maintainer
#5 lore raw

PATCH 6/31 drm/amdgpu: avoid dereferencing a NULL pointer

In reply to Sasha Levin

From: Jack Xiao <[email protected]>

[ Upstream commit 55611b507fd6453d26030c0c0619fdf0c262766d ]

Check if irq_src is NULL to avoid dereferencing a NULL pointer, for MES ring is uneccessary to recieve an interrupt notification.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +12 -7
index 869ff624b108c..e5e51e4d4f3d8 100644
@@ -396,7 +396,9 @@ int amdgpu_fence_driver_start_ring(struct amdgpu_ring *ring,
 		ring->fence_drv.gpu_addr = adev->uvd.inst[ring->me].gpu_addr + index;
 	}
 	amdgpu_fence_write(ring, atomic_read(&ring->fence_drv.last_seq));
-	amdgpu_irq_get(adev, irq_src, irq_type);
+
+	if (irq_src)
+		amdgpu_irq_get(adev, irq_src, irq_type);
 
 	ring->fence_drv.irq_src = irq_src;
 	ring->fence_drv.irq_type = irq_type;
@@ -508,8 +510,9 @@ void amdgpu_fence_driver_fini(struct amdgpu_device *adev)
 			/* no need to trigger GPU reset as we are unloading */
 			amdgpu_fence_driver_force_completion(ring);
 		}
-		amdgpu_irq_put(adev, ring->fence_drv.irq_src,
-			       ring->fence_drv.irq_type);
+		if (ring->fence_drv.irq_src)
+			amdgpu_irq_put(adev, ring->fence_drv.irq_src,
+				       ring->fence_drv.irq_type);
 		drm_sched_fini(&ring->sched);
 		del_timer_sync(&ring->fence_drv.fallback_timer);
 		for (j = 0; j <= ring->fence_drv.num_fences_mask; ++j)
@@ -545,8 +548,9 @@ void amdgpu_fence_driver_suspend(struct amdgpu_device *adev)
 		}
 
 		/* disable the interrupt */
-		amdgpu_irq_put(adev, ring->fence_drv.irq_src,
-			       ring->fence_drv.irq_type);
+		if (ring->fence_drv.irq_src)
+			amdgpu_irq_put(adev, ring->fence_drv.irq_src,
+				       ring->fence_drv.irq_type);
 	}
 }
 
@@ -572,8 +576,9 @@ void amdgpu_fence_driver_resume(struct amdgpu_device *adev)
 			continue;
 
 		/* enable the interrupt */
-		amdgpu_irq_get(adev, ring->fence_drv.irq_src,
-			       ring->fence_drv.irq_type);
+		if (ring->fence_drv.irq_src)
+			amdgpu_irq_get(adev, ring->fence_drv.irq_src,
+				       ring->fence_drv.irq_type);
 	}
 }
 
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#6 lore raw

PATCH 7/31 drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

In reply to Sasha Levin

From: Aditya Pakki <[email protected]>

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

---
 drivers/gpu/drm/radeon/radeon_display.c | 4 +++-
 drivers/gpu/drm/radeon/radeon_drv.c     | 4 +++-
 drivers/gpu/drm/radeon/radeon_kms.c     | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/radeon/radeon_display.c +3 -1
index 7d1e14f0140a2..3f0f3a578ddf0 100644
@@ -625,8 +625,10 @@ radeon_crtc_set_config(struct drm_mode_set *set,
 	dev = set->crtc->dev;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_crtc_helper_set_config(set, ctx);
 
drivers/gpu/drm/radeon/radeon_drv.c +3 -1
index c26f09b47ecb2..54729acd0d4af 100644
@@ -523,8 +523,10 @@ long radeon_drm_ioctl(struct file *filp,
 	long ret;
 	dev = file_priv->minor->dev;
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_ioctl(filp, cmd, arg);
 	
drivers/gpu/drm/radeon/radeon_kms.c +3 -1
index 3ff835767ac58..34b3cb6c146f9 100644
@@ -627,8 +627,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (r < 0)
+	if (r < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return r;
+	}
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#7 lore raw

PATCH 8/31 crypto: aesni - Fix build with LLVM_IAS=1

In reply to Sasha Levin

From: Sedat Dilek <[email protected]>

[ Upstream commit 3347c8a079d67af21760a78cc5f2abbcf06d9571 ]

When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS) from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils I see the following breakage in Debian/testing AMD64:

<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,

                                                                         ^

arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc ^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
GCM_ENC_DEC dec
^
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,

                                                                         ^

arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc ^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
GCM_ENC_DEC enc

Craig Topper suggested me in ClangBuiltLinux issue #1050:

Quoted 7 lines

I think the "too many positional arguments" is because the parser isn't able to handle the trailing commas.

The "unknown use of instruction mnemonic" is because the macro was named GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the macro instantiation, but llvm doesn't.

First, I removed the trailing comma in the PRECOMPUTE line.

Second, I substituted:
1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec
2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc

With these changes I was able to build with LLVM_IAS=1 and boot on bare metal.

I confirmed that this works with Linux-kernel v5.7.5 final.

NOTE: This patch is on top of Linux v5.7 final.

Thanks to Craig and especially Nick for double-checking and his comments.

---
 arch/x86/crypto/aesni-intel_asm.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/crypto/aesni-intel_asm.S +3 -3
index cb2deb61c5d96..29b27f9a6e1ee 100644
@@ -270,7 +270,7 @@ ALL_F:      .octa 0xffffffffffffffffffffffffffffffff
 	PSHUFB_XMM %xmm2, %xmm0
 	movdqu %xmm0, CurCount(%arg2) # ctx_data.current_counter = iv
 
-	PRECOMPUTE \SUBKEY, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
+	PRECOMPUTE \SUBKEY, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7
 	movdqu HashKey(%arg2), %xmm13
 
 	CALC_AAD_HASH %xmm13, \AAD, \AADLEN, %xmm0, %xmm1, %xmm2, %xmm3, \
@@ -982,7 +982,7 @@ _initial_blocks_done\@:
 * arg1, %arg3, %arg4 are used as pointers only, not modified
 * %r11 is the data offset value
 */
-.macro GHASH_4_ENCRYPT_4_PARALLEL_ENC TMP1 TMP2 TMP3 TMP4 TMP5 \
+.macro GHASH_4_ENCRYPT_4_PARALLEL_enc TMP1 TMP2 TMP3 TMP4 TMP5 \
 TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 
 	movdqa	  \XMM1, \XMM5
@@ -1190,7 +1190,7 @@ aes_loop_par_enc_done\@:
 * arg1, %arg3, %arg4 are used as pointers only, not modified
 * %r11 is the data offset value
 */
-.macro GHASH_4_ENCRYPT_4_PARALLEL_DEC TMP1 TMP2 TMP3 TMP4 TMP5 \
+.macro GHASH_4_ENCRYPT_4_PARALLEL_dec TMP1 TMP2 TMP3 TMP4 TMP5 \
 TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 
 	movdqa	  \XMM1, \XMM5
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 9/31 video: fbdev: neofb: fix memory leak in neo_scan_monitor()

In reply to Sasha Levin

From: Evgeny Novikov <[email protected]>

[ Upstream commit edcb3895a751c762a18d25c8d9846ce9759ed7e1 ]

neofb_probe() calls neo_scan_monitor() that can successfully allocate a memory for info->monspecs.modedb and proceed to case 0x03. There it does not free the memory and returns -1. neofb_probe() goes to label err_scan_monitor, thus, it does not free this memory through calling fb_destroy_modedb() as well. We can not go to label err_init_hw since neo_scan_monitor() can fail during memory allocation. So, the patch frees the memory directly for case 0x03.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/video/fbdev/neofb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/video/fbdev/neofb.c +1 -0
index 5d3a444083f74..2018e1ca33eb6 100644
@@ -1820,6 +1820,7 @@ static int neo_scan_monitor(struct fb_info *info)
 #else
 		printk(KERN_ERR
 		       "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
+		kfree(info->monspecs.modedb);
 		return -1;
 #endif
 	default:
Signature · 1 line
2.25.1
author maintainer
#9 lore raw

PATCH 10/31 md-cluster: fix wild pointer of unlock_all_bitmaps()

In reply to Sasha Levin

From: Zhao Heming <[email protected]>

[ Upstream commit 60f80d6f2d07a6d8aee485a1d1252327eeee0c81 ]

reproduction steps:

```
node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda
/dev/sdb
node2 # mdadm -A /dev/md0 /dev/sda /dev/sdb
node1 # mdadm -G /dev/md0 -b none
mdadm: failed to remove clustered bitmap.
node1 # mdadm -S --scan
^C  <==== mdadm hung & kernel crash
```

kernel stack:

```
[  335.230657] general protection fault: 0000 [#1] SMP NOPTI
[...]
[  335.230848] Call Trace:
[  335.230873]  ? unlock_all_bitmaps+0x5/0x70 [md_cluster]
[  335.230886]  unlock_all_bitmaps+0x3d/0x70 [md_cluster]
[  335.230899]  leave+0x10f/0x190 [md_cluster]
[  335.230932]  ? md_super_wait+0x93/0xa0 [md_mod]
[  335.230947]  ? leave+0x5/0x190 [md_cluster]
[  335.230973]  md_cluster_stop+0x1a/0x30 [md_mod]
[  335.230999]  md_bitmap_free+0x142/0x150 [md_mod]
[  335.231013]  ? _cond_resched+0x15/0x40
[  335.231025]  ? mutex_lock+0xe/0x30
[  335.231056]  __md_stop+0x1c/0xa0 [md_mod]
[  335.231083]  do_md_stop+0x160/0x580 [md_mod]
[  335.231119]  ? 0xffffffffc05fb078
[  335.231148]  md_ioctl+0xa04/0x1930 [md_mod]
[  335.231165]  ? filename_lookup+0xf2/0x190
[  335.231179]  blkdev_ioctl+0x93c/0xa10
[  335.231205]  ? _cond_resched+0x15/0x40
[  335.231214]  ? __check_object_size+0xd4/0x1a0
[  335.231224]  block_ioctl+0x39/0x40
[  335.231243]  do_vfs_ioctl+0xa0/0x680
[  335.231253]  ksys_ioctl+0x70/0x80
[  335.231261]  __x64_sys_ioctl+0x16/0x20
[  335.231271]  do_syscall_64+0x65/0x1f0
[  335.231278]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
```
---
 drivers/md/md-cluster.c | 1 +
 1 file changed, 1 insertion(+)
drivers/md/md-cluster.c +1 -0
index 0b2af6e74fc37..4522e87d9d68d 100644
@@ -1443,6 +1443,7 @@ static void unlock_all_bitmaps(struct mddev *mddev)
 			}
 		}
 		kfree(cinfo->other_bitmap_lockres);
+		cinfo->other_bitmap_lockres = NULL;
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#10 lore raw

PATCH 11/31 arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding

In reply to Sasha Levin

From: Ricardo Cañuelo <[email protected]>

[ Upstream commit bbe28fc3cbabbef781bcdf847615d52ce2e26e42 ]

hi3660-hikey960.dts:
Define a 'ports' node for 'adv7533: adv7533@39' and the 'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT binding.

This fills the requirements to meet the binding requirements, remote endpoints are not defined.

hi6220-hikey.dts:
Change property name s/pd-gpio/pd-gpios, gpio properties should be plural. This is just a cosmetic change.

---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts    |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +11 -0
index c98bcbc8dfba3..53848e0e5e0c6 100644
@@ -530,6 +530,17 @@ adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +1 -1
index e80a792827edb..60568392d21eb 100644
@@ -515,7 +515,7 @@ adv7533: adv7533@39 {
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#11 lore raw

PATCH 12/31 drm/etnaviv: fix ref count leak via pm_runtime_get_sync

In reply to Sasha Levin

From: Navid Emamdoost <[email protected]>

[ Upstream commit c5d5a32ead1e3a61a07a1e59eb52a53e4a6b2a7f ]

in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs, and etnaviv_gpu_init the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning.

---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/gpu/drm/etnaviv/etnaviv_gpu.c +10 -4
index 6a859e077ea02..f17fbe6ff7c74 100644
@@ -694,7 +694,7 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
 	ret = pm_runtime_get_sync(gpu->dev);
 	if (ret < 0) {
 		dev_err(gpu->dev, "Failed to enable GPU power domain\n");
-		return ret;
+		goto pm_put;
 	}
 
 	etnaviv_hw_identify(gpu);
@@ -808,6 +808,7 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
 	gpu->mmu = NULL;
 fail:
 	pm_runtime_mark_last_busy(gpu->dev);
+pm_put:
 	pm_runtime_put_autosuspend(gpu->dev);
 
 	return ret;
@@ -848,7 +849,7 @@ int etnaviv_gpu_debugfs(struct etnaviv_gpu *gpu, struct seq_file *m)
 
 	ret = pm_runtime_get_sync(gpu->dev);
 	if (ret < 0)
-		return ret;
+		goto pm_put;
 
 	dma_lo = gpu_read(gpu, VIVS_FE_DMA_LOW);
 	dma_hi = gpu_read(gpu, VIVS_FE_DMA_HIGH);
@@ -971,6 +972,7 @@ int etnaviv_gpu_debugfs(struct etnaviv_gpu *gpu, struct seq_file *m)
 	ret = 0;
 
 	pm_runtime_mark_last_busy(gpu->dev);
+pm_put:
 	pm_runtime_put_autosuspend(gpu->dev);
 
 	return ret;
@@ -985,7 +987,7 @@ void etnaviv_gpu_recover_hang(struct etnaviv_gpu *gpu)
 	dev_err(gpu->dev, "recover hung GPU!\n");
 
 	if (pm_runtime_get_sync(gpu->dev) < 0)
-		return;
+		goto pm_put;
 
 	mutex_lock(&gpu->lock);
 
@@ -1005,6 +1007,7 @@ void etnaviv_gpu_recover_hang(struct etnaviv_gpu *gpu)
 
 	mutex_unlock(&gpu->lock);
 	pm_runtime_mark_last_busy(gpu->dev);
+pm_put:
 	pm_runtime_put_autosuspend(gpu->dev);
 }
 
@@ -1278,8 +1281,10 @@ struct dma_fence *etnaviv_gpu_submit(struct etnaviv_gem_submit *submit)
 
 	if (!submit->runtime_resumed) {
 		ret = pm_runtime_get_sync(gpu->dev);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put_noidle(gpu->dev);
 			return NULL;
+		}
 		submit->runtime_resumed = true;
 	}
 
@@ -1296,6 +1301,7 @@ struct dma_fence *etnaviv_gpu_submit(struct etnaviv_gem_submit *submit)
 	ret = event_alloc(gpu, nr_events, event);
 	if (ret) {
 		DRM_ERROR("no free events\n");
+		pm_runtime_put_noidle(gpu->dev);
 		return NULL;
 	}
 
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#12 lore raw

PATCH 13/31 drm/nouveau: fix multiple instances of reference count leaks

In reply to Sasha Levin

From: Aditya Pakki <[email protected]>

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the
ref count before returning the error.

---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 8 ++++++--
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/nouveau/nouveau_drm.c +6 -2
index 2b7a54cc3c9ef..81999bed1e4a5 100644
@@ -899,8 +899,10 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 
 	/* need to bring up power immediately if opening device */
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	get_task_comm(tmpname, current);
 	snprintf(name, sizeof(name), "%s[%d]", tmpname, pid_nr(fpriv->pid));
@@ -980,8 +982,10 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long ret;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	switch (_IOC_NR(cmd) - DRM_COMMAND_BASE) {
 	case DRM_NOUVEAU_NVIF:
drivers/gpu/drm/nouveau/nouveau_gem.c +3 -1
index b56524d343c3e..791f970714ed6 100644
@@ -46,8 +46,10 @@ nouveau_gem_object_del(struct drm_gem_object *gem)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (WARN_ON(ret < 0 && ret != -EACCES))
+	if (WARN_ON(ret < 0 && ret != -EACCES)) {
+		pm_runtime_put_autosuspend(dev);
 		return;
+	}
 
 	if (gem->import_attach)
 		drm_prime_gem_destroy(gem, nvbo->bo.sg);
Signature · 1 line
2.25.1
author maintainer
#13 lore raw

PATCH 14/31 usb: mtu3: clear dual mode of u3port when disable device

In reply to Sasha Levin

From: Chunfeng Yun <[email protected]>

[ Upstream commit f1e51e99ed498d4aa9ae5df28e43d558ea627781 ]

If not clear u3port's dual mode when disable device, the IP will fail to enter sleep mode when suspend.

---
 drivers/usb/mtu3/mtu3_core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/usb/mtu3/mtu3_core.c +5 -1
index 8606935201326..408e964522ab9 100644
@@ -128,8 +128,12 @@ static void mtu3_device_disable(struct mtu3 *mtu)
 	mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
 		SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
 
-	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
 		mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+		if (mtu->is_u3_ip)
+			mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
+				     SSUSB_U3_PORT_DUAL_MODE);
+	}
 
 	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
 }
Signature · 7 lines
2.25.1


_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
author maintainer
#14 lore raw

PATCH 15/31 drm/debugfs: fix plain echo to connector "force" attribute

In reply to Sasha Levin

From: Michael Tretter <[email protected]>

[ Upstream commit c704b17071c4dc571dca3af4e4151dac51de081a ]

Using plain echo to set the "force" connector attribute fails with -EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a newline.

v2: use sysfs_streq instead of stripping trailing whitespace

---
 drivers/gpu/drm/drm_debugfs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_debugfs.c +4 -4
index 373bd4c2b698b..84b7b22a9590a 100644
@@ -265,13 +265,13 @@ static ssize_t connector_write(struct file *file, const char __user *ubuf,
 
 	buf[len] = '\0';
 
-	if (!strcmp(buf, "on"))
+	if (sysfs_streq(buf, "on"))
 		connector->force = DRM_FORCE_ON;
-	else if (!strcmp(buf, "digital"))
+	else if (sysfs_streq(buf, "digital"))
 		connector->force = DRM_FORCE_ON_DIGITAL;
-	else if (!strcmp(buf, "off"))
+	else if (sysfs_streq(buf, "off"))
 		connector->force = DRM_FORCE_OFF;
-	else if (!strcmp(buf, "unspecified"))
+	else if (sysfs_streq(buf, "unspecified"))
 		connector->force = DRM_FORCE_UNSPECIFIED;
 	else
 		return -EINVAL;
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#15 lore raw

PATCH 16/31 drm/radeon: disable AGP by default

In reply to Sasha Levin

From: Christian König <[email protected]>

[ Upstream commit ba806f98f868ce107aa9c453fef751de9980e4af ]

Always use the PCI GART instead. We just have to many cases where AGP still causes problems. This means a performance regression for some GPUs, but also a bug fix for some others.

---
 drivers/gpu/drm/radeon/radeon_drv.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/gpu/drm/radeon/radeon_drv.c +0 -5
index 54729acd0d4af..0cd33289c2b63 100644
@@ -168,12 +168,7 @@ int radeon_no_wb;
 int radeon_modeset = -1;
 int radeon_dynclks = -1;
 int radeon_r4xx_atom = 0;
-#ifdef __powerpc__
-/* Default to PCI on PowerPC (fdo #95017) */
 int radeon_agpmode = -1;
-#else
-int radeon_agpmode = 0;
-#endif
 int radeon_vram_limit = 0;
 int radeon_gart_size = -1; /* auto */
 int radeon_benchmarking = 0;
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#16 lore raw

PATCH 17/31 irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock

In reply to Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ]

This driver may take a regular spinlock when a raw spinlock (irq_desc->lock) is already taken which results in the following lockdep splat:

=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0 other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
#0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x20
 dump_stack+0xd0/0x118
 __lock_acquire+0x8c8/0x2270
 lock_acquire+0xf8/0x470
 _raw_spin_lock_irqsave+0x50/0x78
 mtk_sysirq_set_type+0x48/0xc0
 __irq_set_trigger+0x58/0x170
 __setup_irq+0x420/0x8a0
 request_threaded_irq+0xd8/0x190
 timer_of_init+0x1e8/0x2c4
 mtk_gpt_init+0x5c/0x1dc
 timer_probe+0x74/0xf4
 time_init+0x14/0x44
 start_kernel+0x394/0x4f0

Replace the spinlock_t with raw_spinlock_t to avoid this warning.

---
 drivers/irqchip/irq-mtk-sysirq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/irqchip/irq-mtk-sysirq.c +4 -4
index 90aaf190157f7..42455f31b0611 100644
@@ -23,7 +23,7 @@
 #include <linux/spinlock.h>
 
 struct mtk_sysirq_chip_data {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	u32 nr_intpol_bases;
 	void __iomem **intpol_bases;
 	u32 *intpol_words;
@@ -45,7 +45,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 	reg_index = chip_data->which_word[hwirq];
 	offset = hwirq & 0x1f;
 
-	spin_lock_irqsave(&chip_data->lock, flags);
+	raw_spin_lock_irqsave(&chip_data->lock, flags);
 	value = readl_relaxed(base + reg_index * 4);
 	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
 		if (type == IRQ_TYPE_LEVEL_LOW)
@@ -61,7 +61,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 
 	data = data->parent_data;
 	ret = data->chip->irq_set_type(data, type);
-	spin_unlock_irqrestore(&chip_data->lock, flags);
+	raw_spin_unlock_irqrestore(&chip_data->lock, flags);
 	return ret;
 }
 
@@ -220,7 +220,7 @@ static int __init mtk_sysirq_of_init(struct device_node *node,
 		ret = -ENOMEM;
 		goto out_free_which_word;
 	}
-	spin_lock_init(&chip_data->lock);
+	raw_spin_lock_init(&chip_data->lock);
 
 	return 0;
 
Signature · 7 lines
2.25.1


_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
author maintainer
#17 lore raw

PATCH 18/31 mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls

In reply to Sasha Levin

From: "Paul E. McKenney" <[email protected]>

[ Upstream commit 0a3b3c253a1eb2c7fe7f34086d46660c909abeb3 ]

A large process running on a heavily loaded system can encounter the following RCU CPU stall warning:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: 	3-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
  	(t=21013 jiffies g=1005461 q=132576)
  NMI backtrace for cpu 3
  CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
  Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x60
   nmi_cpu_backtrace.cold.3+0x13/0x50
   ? lapic_can_unplug_cpu.cold.27+0x34/0x34
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x99/0xc7
   rcu_sched_clock_irq.cold.87+0x1aa/0x397
   ? tick_sched_do_timer+0x60/0x60
   update_process_times+0x28/0x60
   tick_sched_timer+0x37/0x70
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:kmem_cache_free+0x223/0x300
  Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
  RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
  RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
  RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
  RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
  R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
  R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
   ? remove_vma+0x4f/0x60
   remove_vma+0x4f/0x60
   exit_mmap+0xd6/0x160
   mmput+0x4a/0x110
   do_exit+0x278/0xae0
   ? syscall_trace_enter+0x1d3/0x2b0
   ? handle_mm_fault+0xaa/0x1c0
   do_group_exit+0x3a/0xa0
   __x64_sys_exit_group+0x14/0x20
   do_syscall_64+0x42/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run for a very long time given a large process. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

---
 mm/mmap.c | 1 +
 1 file changed, 1 insertion(+)
mm/mmap.c +1 -0
index a98f09b830197..e84fd3347a518 100644
@@ -3100,6 +3100,7 @@ void exit_mmap(struct mm_struct *mm)
 		if (vma->vm_flags & VM_ACCOUNT)
 			nr_accounted += vma_pages(vma);
 		vma = remove_vma(vma);
+		cond_resched();
 	}
 	vm_unacct_memory(nr_accounted);
 }
Signature · 1 line
2.25.1
author maintainer
#18 lore raw

PATCH 19/31 brcmfmac: keep SDIO watchdog running when console_interval is non-zero

In reply to Sasha Levin

From: Wright Feng <[email protected]>

[ Upstream commit eccbf46b15bb3e35d004148f7c3a8fa8e9b26c1e ]

brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no pending event or data. As a result, host driver does not poll firmware console buffer before buffer overflow, which leads to missing firmware logs. We should not stop SDIO watchdog if console_interval is non-zero in debug build.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +5 -1
index 96870d1b3b73b..a5195bdb4d9bd 100644
@@ -3633,7 +3633,11 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 			if (bus->idlecount > bus->idletime) {
 				brcmf_dbg(SDIO, "idle\n");
 				sdio_claim_host(bus->sdiodev->func1);
-				brcmf_sdio_wd_timer(bus, false);
+#ifdef DEBUG
+				if (!BRCMF_FWCON_ON() ||
+				    bus->console_interval == 0)
+#endif
+					brcmf_sdio_wd_timer(bus, false);
 				bus->idlecount = 0;
 				brcmf_sdio_bus_sleep(bus, true, false);
 				sdio_release_host(bus->sdiodev->func1);
Signature · 1 line
2.25.1
author maintainer
#19 lore raw

PATCH 20/31 brcmfmac: To fix Bss Info flag definition Bug

In reply to Sasha Levin

From: Prasanna Kerekoppa <[email protected]>

[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]

Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +1 -1
index d5bb81e887624..9d2367133c7c6 100644
@@ -30,7 +30,7 @@
 #define BRCMF_ARP_OL_PEER_AUTO_REPLY	0x00000008
 
 #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
-#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
+#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0004
 
 #define BRCMF_STA_BRCM			0x00000001	/* Running a Broadcom driver */
 #define BRCMF_STA_WME			0x00000002	/* WMM association */
Signature · 1 line
2.25.1
author maintainer
#20 lore raw

PATCH 21/31 brcmfmac: set state of hanger slot to FREE when flushing PSQ

In reply to Sasha Levin

From: Wright Feng <[email protected]>

[ Upstream commit fcdd7a875def793c38d7369633af3eba6c7cf089 ]

When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger slot linked to PSQ and TSQ), so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb.
In brcmf_fws_bus_txq_cleanup it already sets BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the same thing in brcmf_fws_psq_flush to avoid following warning message.

   [ 1580.012880] ------------   [ cut here ]------------
   [ 1580.017550] WARNING: CPU: 3 PID: 3065 at
drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49
brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil]
   [ 1580.184017] Call Trace:
   [ 1580.186514]  brcmf_fws_cleanup+0x14e/0x190 [brcmfmac]
   [ 1580.191594]  brcmf_fws_del_interface+0x70/0x90 [brcmfmac]
   [ 1580.197029]  brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac]
   [ 1580.202418]  brcmf_remove_interface+0x69/0x190 [brcmfmac]
   [ 1580.207888]  brcmf_detach+0x90/0xe0 [brcmfmac]
   [ 1580.212385]  brcmf_usb_disconnect+0x76/0xb0 [brcmfmac]
   [ 1580.217557]  usb_unbind_interface+0x72/0x260
   [ 1580.221857]  device_release_driver_internal+0x141/0x200
   [ 1580.227152]  device_release_driver+0x12/0x20
   [ 1580.231460]  bus_remove_device+0xfd/0x170
   [ 1580.235504]  device_del+0x1d9/0x300
   [ 1580.239041]  usb_disable_device+0x9e/0x270
   [ 1580.243160]  usb_disconnect+0x94/0x270
   [ 1580.246980]  hub_event+0x76d/0x13b0
   [ 1580.250499]  process_one_work+0x144/0x360
   [ 1580.254564]  worker_thread+0x4d/0x3c0
   [ 1580.258247]  kthread+0x109/0x140
   [ 1580.261515]  ? rescuer_thread+0x340/0x340
   [ 1580.265543]  ? kthread_park+0x60/0x60
   [ 1580.269237]  ? SyS_exit_group+0x14/0x20
   [ 1580.273118]  ret_from_fork+0x25/0x30
   [ 1580.300446] ------------   [ cut here ]------------
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c +4 -0
index 1de8497d92b8a..dc7c970257d2f 100644
@@ -653,6 +653,7 @@ static inline int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
 static void brcmf_fws_psq_flush(struct brcmf_fws_info *fws, struct pktq *q,
 				int ifidx)
 {
+	struct brcmf_fws_hanger_item *hi;
 	bool (*matchfn)(struct sk_buff *, void *) = NULL;
 	struct sk_buff *skb;
 	int prec;
@@ -664,6 +665,9 @@ static void brcmf_fws_psq_flush(struct brcmf_fws_info *fws, struct pktq *q,
 		skb = brcmu_pktq_pdeq_match(q, prec, matchfn, &ifidx);
 		while (skb) {
 			hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
+			hi = &fws->hanger.items[hslot];
+			WARN_ON(skb != hi->pkt);
+			hi->state = BRCMF_FWS_HANGER_ITEM_STATE_FREE;
 			brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
 						true);
 			brcmu_pkt_buf_free_skb(skb);
Signature · 1 line
2.25.1
author maintainer
#21 lore raw

PATCH 22/31 iwlegacy: Check the return value of pcie_capability_read_*()

In reply to Sasha Levin

From: Bolarinwa Olayemi Saheed <[email protected]>

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

---
 drivers/net/wireless/intel/iwlegacy/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/intel/iwlegacy/common.c +2 -2
index e16f2597c2199..c1c1cf330de7f 100644
@@ -4302,8 +4302,8 @@ il_apm_init(struct il_priv *il)
 	 *    power savings, even without L1.
 	 */
 	if (il->cfg->set_l0s) {
-		pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
-		if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
+		ret = pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
+		if (!ret && (lctl & PCI_EXP_LNKCTL_ASPM_L1)) {
 			/* L1-ASPM enabled; disable(!) L0S  */
 			il_set_bit(il, CSR_GIO_REG,
 				   CSR_GIO_REG_VAL_L0S_ENABLED);
Signature · 1 line
2.25.1
author maintainer
#22 lore raw

PATCH 23/31 gpu: host1x: debug: Fix multiple channels emitting messages simultaneously

In reply to Sasha Levin

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 35681862808472a0a4b9a8817ae2789c0b5b3edc ]

Once channel's job is hung, it dumps the channel's state into KMSG before tearing down the offending job. If multiple channels hang at once, then they dump messages simultaneously, making the debug info unreadable, and thus, useless. This patch adds mutex which allows only one channel to emit debug messages at a time.

---
 drivers/gpu/host1x/debug.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/host1x/debug.c +4 -0
index 329e4a3d8ae7b..6c9ad4533999c 100644
@@ -25,6 +25,8 @@
 #include "debug.h"
 #include "channel.h"
 
+static DEFINE_MUTEX(debug_lock);
+
 unsigned int host1x_debug_trace_cmdbuf;
 
 static pid_t host1x_debug_force_timeout_pid;
@@ -61,12 +63,14 @@ static int show_channel(struct host1x_channel *ch, void *data, bool show_fifo)
 	struct output *o = data;
 
 	mutex_lock(&ch->cdma.lock);
+	mutex_lock(&debug_lock);
 
 	if (show_fifo)
 		host1x_hw_show_channel_fifo(m, ch, o);
 
 	host1x_hw_show_channel_cdma(m, ch, o);
 
+	mutex_unlock(&debug_lock);
 	mutex_unlock(&ch->cdma.lock);
 
 	return 0;
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#23 lore raw

PATCH 24/31 usb: gadget: net2280: fix memory leak on probe error handling paths

In reply to Sasha Levin

From: Evgeny Novikov <[email protected]>

[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]

Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet.

The patch fixes the bug like in other similar drivers.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/usb/gadget/udc/net2280.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/gadget/udc/net2280.c +3 -1
index ee872cad52705..a87caad8d1c7e 100644
@@ -3782,8 +3782,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 done:
-	if (dev)
+	if (dev) {
 		net2280_remove(pdev);
+		kfree(dev);
+	}
 	return retval;
 }
 
Signature · 1 line
2.25.1
author maintainer
#24 lore raw

PATCH 25/31 bdc: Fix bug causing crash after multiple disconnects

In reply to Sasha Levin

From: Sasi Kumar <[email protected]>

[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]

Multiple connects/disconnects can cause a crash on the second disconnect. The driver had a problem where it would try to send endpoint commands after it was disconnected which is not allowed by the hardware. The fix is to only allow the endpoint commands when the endpoint is connected. This will also fix issues that showed up when using configfs to create gadgets.

---
 drivers/usb/gadget/udc/bdc/bdc_core.c |  4 ++++
 drivers/usb/gadget/udc/bdc/bdc_ep.c   | 16 ++++++++++------
 2 files changed, 14 insertions(+), 6 deletions(-)
drivers/usb/gadget/udc/bdc/bdc_core.c +4 -0
index 01b44e1596237..4c557f3154460 100644
@@ -283,6 +283,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 	 * in that case reinit is passed as 1
 	 */
 	if (reinit) {
+		int i;
 		/* Enable interrupts */
 		temp = bdc_readl(bdc->regs, BDC_BDCSC);
 		temp |= BDC_GIE;
@@ -292,6 +293,9 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 		/* Initialize SRR to 0 */
 		memset(bdc->srr.sr_bds, 0,
 					NUM_SR_ENTRIES * sizeof(struct bdc_bd));
+		/* clear ep flags to avoid post disconnect stops/deconfigs */
+		for (i = 1; i < bdc->num_eps; ++i)
+			bdc->bdc_ep_array[i]->flags = 0;
 	} else {
 		/* One time initiaization only */
 		/* Enable status report function pointers */
drivers/usb/gadget/udc/bdc/bdc_ep.c +10 -6
index d49c6dc1082dc..9ddc0b4e92c9c 100644
@@ -615,7 +615,6 @@ int bdc_ep_enable(struct bdc_ep *ep)
 	}
 	bdc_dbg_bd_list(bdc, ep);
 	/* only for ep0: config ep is called for ep0 from connect event */
-	ep->flags |= BDC_EP_ENABLED;
 	if (ep->ep_num == 1)
 		return ret;
 
@@ -759,10 +758,13 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
 					__func__, ep->name, start_bdi, end_bdi);
 	dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n",
 						ep, (void *)ep->usb_ep.desc);
-	/* Stop the ep to see where the HW is ? */
-	ret = bdc_stop_ep(bdc, ep->ep_num);
-	/* if there is an issue with stopping ep, then no need to go further */
-	if (ret)
+	/* if still connected, stop the ep to see where the HW is ? */
+	if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) {
+		ret = bdc_stop_ep(bdc, ep->ep_num);
+		/* if there is an issue, then no need to go further */
+		if (ret)
+			return 0;
+	} else
 		return 0;
 
 	/*
@@ -1911,7 +1913,9 @@ static int bdc_gadget_ep_disable(struct usb_ep *_ep)
 		__func__, ep->name, ep->flags);
 
 	if (!(ep->flags & BDC_EP_ENABLED)) {
-		dev_warn(bdc->dev, "%s is already disabled\n", ep->name);
+		if (bdc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_warn(bdc->dev, "%s is already disabled\n",
+				 ep->name);
 		return 0;
 	}
 	spin_lock_irqsave(&bdc->lock, flags);
Signature · 1 line
2.25.1
author maintainer
#25 lore raw

PATCH 26/31 usb: bdc: Halt controller on suspend

In reply to Sasha Levin

From: Danesh Petigara <[email protected]>

[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]

GISB bus error kernel panics have been observed during S2 transition tests on the 7271t platform. The errors are a result of the BDC interrupt handler trying to access BDC register space after the system's suspend callbacks have completed.

Adding a suspend hook to the BDC driver that halts the controller before S2 entry thus preventing unwanted access to the BDC register space during this transition.

---
 drivers/usb/gadget/udc/bdc/bdc_core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/usb/gadget/udc/bdc/bdc_core.c +7 -2
index 4c557f3154460..e174b1b889da5 100644
@@ -608,9 +608,14 @@ static int bdc_remove(struct platform_device *pdev)
 static int bdc_suspend(struct device *dev)
 {
 	struct bdc *bdc = dev_get_drvdata(dev);
+	int ret;
 
-	clk_disable_unprepare(bdc->clk);
-	return 0;
+	/* Halt the controller */
+	ret = bdc_stop(bdc);
+	if (!ret)
+		clk_disable_unprepare(bdc->clk);
+
+	return ret;
 }
 
 static int bdc_resume(struct device *dev)
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 27/31 dyndbg: fix a BUG_ON in ddebug_describe_flags

In reply to Sasha Levin

From: Jim Cromie <[email protected]>

[ Upstream commit f678ce8cc3cb2ad29df75d8824c74f36398ba871 ]

ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead.

Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked.

---
 lib/dynamic_debug.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)
lib/dynamic_debug.c +11 -12
index dbf2b457e47e6..9305ff43fc155 100644
@@ -85,22 +85,22 @@ static struct { unsigned flag:8; char opt_char; } opt_array[] = {
 	{ _DPRINTK_FLAGS_NONE, '_' },
 };
 
+struct flagsbuf { char buf[ARRAY_SIZE(opt_array)+1]; };
+
 /* format a string into buf[] which describes the _ddebug's flags */
-static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
-				    size_t maxlen)
+static char *ddebug_describe_flags(unsigned int flags, struct flagsbuf *fb)
 {
-	char *p = buf;
+	char *p = fb->buf;
 	int i;
 
-	BUG_ON(maxlen < 6);
 	for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
-		if (dp->flags & opt_array[i].flag)
+		if (flags & opt_array[i].flag)
 			*p++ = opt_array[i].opt_char;
-	if (p == buf)
+	if (p == fb->buf)
 		*p++ = '_';
 	*p = '\0';
 
-	return buf;
+	return fb->buf;
 }
 
 #define vpr_info(fmt, ...)					\
@@ -142,7 +142,7 @@ static int ddebug_change(const struct ddebug_query *query,
 	struct ddebug_table *dt;
 	unsigned int newflags;
 	unsigned int nfound = 0;
-	char flagbuf[10];
+	struct flagsbuf fbuf;
 
 	/* search for matching ddebugs */
 	mutex_lock(&ddebug_lock);
@@ -199,8 +199,7 @@ static int ddebug_change(const struct ddebug_query *query,
 			vpr_info("changed %s:%d [%s]%s =%s\n",
 				 trim_prefix(dp->filename), dp->lineno,
 				 dt->mod_name, dp->function,
-				 ddebug_describe_flags(dp, flagbuf,
-						       sizeof(flagbuf)));
+				 ddebug_describe_flags(dp->flags, &fbuf));
 		}
 	}
 	mutex_unlock(&ddebug_lock);
@@ -779,7 +778,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 {
 	struct ddebug_iter *iter = m->private;
 	struct _ddebug *dp = p;
-	char flagsbuf[10];
+	struct flagsbuf flags;
 
 	vpr_info("called m=%p p=%p\n", m, p);
 
@@ -792,7 +791,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 	seq_printf(m, "%s:%u [%s]%s =%s \"",
 		   trim_prefix(dp->filename), dp->lineno,
 		   iter->table->mod_name, dp->function,
-		   ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+		   ddebug_describe_flags(dp->flags, &flags));
 	seq_escape(m, dp->format, "\t\r\n\"");
 	seq_puts(m, "\"\n");
 
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 28/31 dyndbg: prefer declarative init in caller, to memset in callee

In reply to Sasha Levin

From: Jim Cromie <[email protected]>

[ Upstream commit 9c9d0acbe2793315fa6945a19685ad2a51fb281b ]

ddebug_exec_query declares an auto var, and passes it to ddebug_parse_query, which memsets it before using it. Drop that memset, instead initialize the variable in the caller; let the compiler decide how to do it.

---
 lib/dynamic_debug.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
lib/dynamic_debug.c +1 -2
index 9305ff43fc155..9d389e48a2a5d 100644
@@ -325,7 +325,6 @@ static int ddebug_parse_query(char *words[], int nwords,
 		pr_err("expecting pairs of match-spec <value>\n");
 		return -EINVAL;
 	}
-	memset(query, 0, sizeof(*query));
 
 	if (modname)
 		/* support $modname.dyndbg=<multiple queries> */
@@ -443,7 +442,7 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
 static int ddebug_exec_query(char *query_string, const char *modname)
 {
 	unsigned int flags = 0, mask = 0;
-	struct ddebug_query query;
+	struct ddebug_query query = {};
 #define MAXWORDS 9
 	int nwords, nfound;
 	char *words[MAXWORDS];
Signature · 1 line
2.25.1
author maintainer
#28 lore raw

PATCH 29/31 bcache: fix super block seq numbers comparision in register_cache_set()

In reply to Sasha Levin

From: Coly Li <[email protected]>

[ Upstream commit 117f636ea695270fe492d0c0c9dfadc7a662af47 ]

In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {

2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);

2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly.

But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered.

This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device.

---
 drivers/md/bcache/super.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/md/bcache/super.c +8 -1
index 68ebc2759c2ef..46ad0bf18e1fd 100644
@@ -2013,7 +2013,14 @@ static const char *register_cache_set(struct cache *ca)
 	    sysfs_create_link(&c->kobj, &ca->kobj, buf))
 		goto err;
 
-	if (ca->sb.seq > c->sb.seq) {
+	/*
+	 * A special case is both ca->sb.seq and c->sb.seq are 0,
+	 * such condition happens on a new created cache device whose
+	 * super block is never flushed yet. In this case c->sb.version
+	 * and other members should be updated too, otherwise we will
+	 * have a mistaken super block version in cache set.
+	 */
+	if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
 		c->sb.version		= ca->sb.version;
 		memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
 		c->sb.flags             = ca->sb.flags;
Signature · 1 line
2.25.1
author maintainer
#29 lore raw

PATCH 30/31 ACPICA: Do not increment operation_region reference counts for field units

In reply to Sasha Levin

From: Erik Kaneda <[email protected]>

[ Upstream commit 6a54ebae6d047c988a31f5ac5a64ab5cf83797a2 ]

ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70

Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects.

Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region.

This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object.

---
 drivers/acpi/acpica/exprep.c   | 4 ----
 drivers/acpi/acpica/utdelete.c | 6 +-----
 2 files changed, 1 insertion(+), 9 deletions(-)
drivers/acpi/acpica/exprep.c +0 -4
index 738f3c732363a..228feeea555f1 100644
@@ -473,10 +473,6 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 				    (u8)access_byte_width;
 			}
 		}
-		/* An additional reference for the container */
-
-		acpi_ut_add_reference(obj_desc->field.region_obj);
-
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 				  "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
 				  obj_desc->field.start_field_bit_offset,
drivers/acpi/acpica/utdelete.c +1 -5
index 8cc4392c61f33..0dc8dea815823 100644
@@ -563,11 +563,6 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 			next_object = object->buffer_field.buffer_obj;
 			break;
 
-		case ACPI_TYPE_LOCAL_REGION_FIELD:
-
-			next_object = object->field.region_obj;
-			break;
-
 		case ACPI_TYPE_LOCAL_BANK_FIELD:
 
 			next_object = object->bank_field.bank_obj;
@@ -608,6 +603,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 			}
 			break;
 
+		case ACPI_TYPE_LOCAL_REGION_FIELD:
 		case ACPI_TYPE_REGION:
 		default:
 
Signature · 1 line
2.25.1
author maintainer
#30 lore raw

PATCH 31/31 drm/msm: ratelimit crtc event overflow error

In reply to Sasha Levin

From: Rob Clark <[email protected]>

[ Upstream commit 5e16372b5940b1fecc3cc887fc02a50ba148d373 ]

This can happen a lot when things go pear shaped. Lets not flood dmesg when this happens.

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +1 -1
index 4752f08f0884c..3c3b7f7013e87 100644
@@ -659,7 +659,7 @@ static void dpu_crtc_frame_event_cb(void *data, u32 event)
 	spin_unlock_irqrestore(&dpu_crtc->spin_lock, flags);
 
 	if (!fevent) {
-		DRM_ERROR("crtc%d event %d overflow\n", crtc->base.id, event);
+		DRM_ERROR_RATELIMITED("crtc%d event %d overflow\n", crtc->base.id, event);
 		return;
 	}
 
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel