Skip to contentSkip to conversation

drm/tilcdc: fix leak & null ref in panel_connector_get_modes

PATCH In review Sasha Levin 3 participants 18 messages Aug 10, 2020 – Aug 11, 2020

Subsystems (10)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/16 drm/tilcdc: fix leak & null ref in panel_connector_get_modes

From: Tomi Valkeinen <[email protected]>

[ Upstream commit 3f9c1c872cc97875ddc8d63bc9fe6ee13652b933 ]

If videomode_from_timings() returns true, the mode allocated with drm_mode_create will be leaked.

Also, the return value of drm_mode_create() is never checked, and thus could cause NULL deref.

Fix these two issues.

---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/tilcdc/tilcdc_panel.c +5 -1
index 0af8bed7ce1ee..08d8f608be632 100644
@@ -177,12 +177,16 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 	int i;
 
 	for (i = 0; i < timings->num_timings; i++) {
-		struct drm_display_mode *mode = drm_mode_create(dev);
+		struct drm_display_mode *mode;
 		struct videomode vm;
 
 		if (videomode_from_timings(timings, &vm, i))
 			break;
 
+		mode = drm_mode_create(dev);
+		if (!mode)
+			break;
+
 		drm_display_mode_from_videomode(&vm, mode);
 
 		mode->type = DRM_MODE_TYPE_DRIVER;
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#1 lore raw

PATCH 2/16 Bluetooth: add a mutex lock to avoid UAF in do_enale_set

From: Lihong Kou <[email protected]>

[ Upstream commit f9c70bdc279b191da8d60777c627702c06e4a37d ]

In the case we set or free the global value listen_chan in different threads, we can encounter the UAF problems because the method is not protected by any lock, add one to avoid this bug.

BUG: KASAN: use-after-free in l2cap_chan_close+0x48/0x990
net/bluetooth/l2cap_core.c:730
Read of size 8 at addr ffff888096950000 by task kworker/1:102/2868

CPU: 1 PID: 2868 Comm: kworker/1:102 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: events do_enable_set
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1fb/0x318 lib/dump_stack.c:118
 print_address_description+0x74/0x5c0 mm/kasan/report.c:374
 __kasan_report+0x149/0x1c0 mm/kasan/report.c:506
 kasan_report+0x26/0x50 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730
 do_enable_set+0x660/0x900 net/bluetooth/6lowpan.c:1074
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc+0x118/0x1c0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0x221/0x2f0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 l2cap_chan_create+0x50/0x320 net/bluetooth/l2cap_core.c:446
 chan_create net/bluetooth/6lowpan.c:640 [inline]
 bt_6lowpan_listen net/bluetooth/6lowpan.c:959 [inline]
 do_enable_set+0x6a4/0x900 net/bluetooth/6lowpan.c:1078
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x12e/0x1e0 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10d/0x220 mm/slab.c:3757
 l2cap_chan_destroy net/bluetooth/l2cap_core.c:484 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_chan_put+0x170/0x190 net/bluetooth/l2cap_core.c:498
 do_enable_set+0x66c/0x900 net/bluetooth/6lowpan.c:1075
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff888096950000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 0 bytes inside of
 2048-byte region [ffff888096950000, ffff888096950800)
The buggy address belongs to the page:
page:ffffea00025a5400 refcount:1 mapcount:0 mapping:ffff8880aa400e00 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea00027d1548 ffffea0002397808 ffff8880aa400e00
raw: 0000000000000000 ffff888096950000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88809694ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88809694ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096950000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff888096950080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888096950100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
---
 net/bluetooth/6lowpan.c | 5 +++++
 1 file changed, 5 insertions(+)
net/bluetooth/6lowpan.c +5 -0
index 4cd6b8d811ffa..11602902884ba 100644
@@ -57,6 +57,7 @@ static bool enable_6lowpan;
 /* We are listening incoming connections via this channel
  */
 static struct l2cap_chan *listen_chan;
+static DEFINE_MUTEX(set_lock);
 
 struct lowpan_peer {
 	struct list_head list;
@@ -1195,12 +1196,14 @@ static void do_enable_set(struct work_struct *work)
 
 	enable_6lowpan = set_enable->flag;
 
+	mutex_lock(&set_lock);
 	if (listen_chan) {
 		l2cap_chan_close(listen_chan, 0);
 		l2cap_chan_put(listen_chan);
 	}
 
 	listen_chan = bt_6lowpan_listen();
+	mutex_unlock(&set_lock);
 
 	kfree(set_enable);
 }
@@ -1252,11 +1255,13 @@ static ssize_t lowpan_control_write(struct file *fp,
 		if (ret == -EINVAL)
 			return ret;
 
+		mutex_lock(&set_lock);
 		if (listen_chan) {
 			l2cap_chan_close(listen_chan, 0);
 			l2cap_chan_put(listen_chan);
 			listen_chan = NULL;
 		}
+		mutex_unlock(&set_lock);
 
 		if (conn) {
 			struct lowpan_peer *peer;
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH 3/16 fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls

In reply to Sasha Levin

From: "Paul E. McKenney" <[email protected]>

[ Upstream commit 9f47eb5461aaeb6cb8696f9d11503ae90e4d5cb0 ]

Very large I/Os can cause the following RCU CPU stall warning:

RIP: 0010:rb_prev+0x8/0x50
Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c =

89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48
RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13
RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0
RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630
RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238
R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001
R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0

 __lookup_extent_mapping+0xa0/0x110
 try_release_extent_mapping+0xdc/0x220
 btrfs_releasepage+0x45/0x70
 shrink_page_list+0xa39/0xb30
 shrink_inactive_list+0x18f/0x3b0
 shrink_lruvec+0x38e/0x6b0
 shrink_node+0x14d/0x690
 do_try_to_free_pages+0xc6/0x3e0
 try_to_free_mem_cgroup_pages+0xe6/0x1e0
 reclaim_high.constprop.73+0x87/0xc0
 mem_cgroup_handle_over_high+0x66/0x150
 exit_to_usermode_loop+0x82/0xd0
 do_syscall_64+0xd4/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

On a PREEMPT=n kernel, the try_release_extent_mapping() function's "while" loop might run for a very long time on a large I/O. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

---
 fs/btrfs/extent_io.c | 2 ++
 1 file changed, 2 insertions(+)
fs/btrfs/extent_io.c +2 -0
index 42b7409d4cc55..2f9f738ecf84a 100644
@@ -4437,6 +4437,8 @@ int try_release_extent_mapping(struct extent_map_tree *map,
 
 			/* once for us */
 			free_extent_map(em);
+
+			cond_resched(); /* Allow large-extent preemption. */
 		}
 	}
 	return try_release_extent_state(map, tree, page, mask);
Signature · 1 line
2.25.1
#3 lore raw

Re: [PATCH AUTOSEL 4.4 03/16] fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls

Quoted 30 lines · Sasha Levin

From: "Paul E. McKenney" <[email protected]>

[ Upstream commit 9f47eb5461aaeb6cb8696f9d11503ae90e4d5cb0 ]

Very large I/Os can cause the following RCU CPU stall warning:

RIP: 0010:rb_prev+0x8/0x50
Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c =

89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48
RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13
RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0
RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630
RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238
R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001
R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0

 __lookup_extent_mapping+0xa0/0x110
 try_release_extent_mapping+0xdc/0x220
 btrfs_releasepage+0x45/0x70
 shrink_page_list+0xa39/0xb30
 shrink_inactive_list+0x18f/0x3b0
 shrink_lruvec+0x38e/0x6b0
 shrink_node+0x14d/0x690
 do_try_to_free_pages+0xc6/0x3e0
 try_to_free_mem_cgroup_pages+0xe6/0x1e0
 reclaim_high.constprop.73+0x87/0xc0
 mem_cgroup_handle_over_high+0x66/0x150
 exit_to_usermode_loop+0x82/0xd0
 do_syscall_64+0xd4/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Quoted 6 lines

On a PREEMPT=n kernel, the try_release_extent_mapping() function's "while" loop might run for a very long time on a large I/O. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

Paul,

this patch was well hidden in some huge RCU pile
(https://lore.kernel.org/lkml/[email protected]/)

I wonder why you haven't CCed linux-btrfs, I spotted the patch queued for stable by incidentally. The timestamp is from June, that's quite some time ago. We can deal with one more patch and I tend to reply with acks quickly for easy patches like this to not block other peoples work but I'm a bit disappointed by sidestepping maintained subsystems. It's not just this patch, it happens from time time only to increase the disapointement.

#4 lore raw

Re: [PATCH AUTOSEL 4.4 03/16] fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls

Quoted 43 lines · David Sterba
Quoted 30 lines · Sasha Levin

From: "Paul E. McKenney" <[email protected]>

[ Upstream commit 9f47eb5461aaeb6cb8696f9d11503ae90e4d5cb0 ]

Very large I/Os can cause the following RCU CPU stall warning:

RIP: 0010:rb_prev+0x8/0x50
Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c =

89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48
RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13
RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0
RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630
RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238
R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001
R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0

 __lookup_extent_mapping+0xa0/0x110
 try_release_extent_mapping+0xdc/0x220
 btrfs_releasepage+0x45/0x70
 shrink_page_list+0xa39/0xb30
 shrink_inactive_list+0x18f/0x3b0
 shrink_lruvec+0x38e/0x6b0
 shrink_node+0x14d/0x690
 do_try_to_free_pages+0xc6/0x3e0
 try_to_free_mem_cgroup_pages+0xe6/0x1e0
 reclaim_high.constprop.73+0x87/0xc0
 mem_cgroup_handle_over_high+0x66/0x150
 exit_to_usermode_loop+0x82/0xd0
 do_syscall_64+0xd4/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Quoted 6 lines

On a PREEMPT=n kernel, the try_release_extent_mapping() function's "while" loop might run for a very long time on a large I/O. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

Paul,

this patch was well hidden in some huge RCU pile
(https://lore.kernel.org/lkml/[email protected]/)

Quoted 7 lines

I wonder why you haven't CCed linux-btrfs, I spotted the patch queued for stable by incidentally. The timestamp is from June, that's quite some time ago. We can deal with one more patch and I tend to reply with acks quickly for easy patches like this to not block other peoples work but I'm a bit disappointed by sidestepping maintained subsystems. It's not just this patch, it happens from time time only to increase the disapointement.

My bad, and please accept my apologies. I clearly left out the step of adding proper Cc: lines. :-/

Thanx, Paul

author maintainer
#5 lore raw

PATCH 4/16 drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

In reply to Sasha Levin

From: Aditya Pakki <[email protected]>

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

---
 drivers/gpu/drm/radeon/radeon_display.c | 4 +++-
 drivers/gpu/drm/radeon/radeon_drv.c     | 4 +++-
 drivers/gpu/drm/radeon/radeon_kms.c     | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/radeon/radeon_display.c +3 -1
index 4572bfba017c5..17c73b8c90e71 100644
@@ -660,8 +660,10 @@ radeon_crtc_set_config(struct drm_mode_set *set)
 	dev = set->crtc->dev;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_crtc_helper_set_config(set);
 
drivers/gpu/drm/radeon/radeon_drv.c +3 -1
index 5b6a6f5b3619e..401403a3ea50c 100644
@@ -527,8 +527,10 @@ long radeon_drm_ioctl(struct file *filp,
 	long ret;
 	dev = file_priv->minor->dev;
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_ioctl(filp, cmd, arg);
 	
drivers/gpu/drm/radeon/radeon_kms.c +3 -1
index d290a8a09036e..41caf7da90548 100644
@@ -631,8 +631,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (r < 0)
+	if (r < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return r;
+	}
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#6 lore raw

PATCH 5/16 video: fbdev: neofb: fix memory leak in neo_scan_monitor()

In reply to Sasha Levin

From: Evgeny Novikov <[email protected]>

[ Upstream commit edcb3895a751c762a18d25c8d9846ce9759ed7e1 ]

neofb_probe() calls neo_scan_monitor() that can successfully allocate a memory for info->monspecs.modedb and proceed to case 0x03. There it does not free the memory and returns -1. neofb_probe() goes to label err_scan_monitor, thus, it does not free this memory through calling fb_destroy_modedb() as well. We can not go to label err_init_hw since neo_scan_monitor() can fail during memory allocation. So, the patch frees the memory directly for case 0x03.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/video/fbdev/neofb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/video/fbdev/neofb.c +1 -0
index db023a97d1eae..e243254a57214 100644
@@ -1820,6 +1820,7 @@ static int neo_scan_monitor(struct fb_info *info)
 #else
 		printk(KERN_ERR
 		       "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
+		kfree(info->monspecs.modedb);
 		return -1;
 #endif
 	default:
Signature · 1 line
2.25.1
author maintainer
#7 lore raw

PATCH 6/16 drm/nouveau: fix multiple instances of reference count leaks

In reply to Sasha Levin

From: Aditya Pakki <[email protected]>

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the
ref count before returning the error.

---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 8 ++++++--
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/nouveau/nouveau_drm.c +6 -2
index 91a61d2cca889..a90840e391100 100644
@@ -805,8 +805,10 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 
 	/* need to bring up power immediately if opening device */
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	get_task_comm(tmpname, current);
 	snprintf(name, sizeof(name), "%s[%d]", tmpname, pid_nr(fpriv->pid));
@@ -894,8 +896,10 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long ret;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	switch (_IOC_NR(cmd) - DRM_COMMAND_BASE) {
 	case DRM_NOUVEAU_NVIF:
drivers/gpu/drm/nouveau/nouveau_gem.c +3 -1
index ae560f5977fca..e5db2a385cb65 100644
@@ -42,8 +42,10 @@ nouveau_gem_object_del(struct drm_gem_object *gem)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (WARN_ON(ret < 0 && ret != -EACCES))
+	if (WARN_ON(ret < 0 && ret != -EACCES)) {
+		pm_runtime_put_autosuspend(dev);
 		return;
+	}
 
 	if (gem->import_attach)
 		drm_prime_gem_destroy(gem, nvbo->bo.sg);
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 7/16 drm/debugfs: fix plain echo to connector "force" attribute

In reply to Sasha Levin

From: Michael Tretter <[email protected]>

[ Upstream commit c704b17071c4dc571dca3af4e4151dac51de081a ]

Using plain echo to set the "force" connector attribute fails with -EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a newline.

v2: use sysfs_streq instead of stripping trailing whitespace

---
 drivers/gpu/drm/drm_debugfs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_debugfs.c +4 -4
index 3bcf8e6a85b35..5b0fdcd0b63fd 100644
@@ -290,13 +290,13 @@ static ssize_t connector_write(struct file *file, const char __user *ubuf,
 
 	buf[len] = '\0';
 
-	if (!strcmp(buf, "on"))
+	if (sysfs_streq(buf, "on"))
 		connector->force = DRM_FORCE_ON;
-	else if (!strcmp(buf, "digital"))
+	else if (sysfs_streq(buf, "digital"))
 		connector->force = DRM_FORCE_ON_DIGITAL;
-	else if (!strcmp(buf, "off"))
+	else if (sysfs_streq(buf, "off"))
 		connector->force = DRM_FORCE_OFF;
-	else if (!strcmp(buf, "unspecified"))
+	else if (sysfs_streq(buf, "unspecified"))
 		connector->force = DRM_FORCE_UNSPECIFIED;
 	else
 		return -EINVAL;
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#9 lore raw

PATCH 8/16 mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls

In reply to Sasha Levin

From: "Paul E. McKenney" <[email protected]>

[ Upstream commit 0a3b3c253a1eb2c7fe7f34086d46660c909abeb3 ]

A large process running on a heavily loaded system can encounter the following RCU CPU stall warning:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: 	3-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
  	(t=21013 jiffies g=1005461 q=132576)
  NMI backtrace for cpu 3
  CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
  Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x60
   nmi_cpu_backtrace.cold.3+0x13/0x50
   ? lapic_can_unplug_cpu.cold.27+0x34/0x34
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x99/0xc7
   rcu_sched_clock_irq.cold.87+0x1aa/0x397
   ? tick_sched_do_timer+0x60/0x60
   update_process_times+0x28/0x60
   tick_sched_timer+0x37/0x70
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:kmem_cache_free+0x223/0x300
  Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
  RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
  RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
  RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
  RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
  R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
  R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
   ? remove_vma+0x4f/0x60
   remove_vma+0x4f/0x60
   exit_mmap+0xd6/0x160
   mmput+0x4a/0x110
   do_exit+0x278/0xae0
   ? syscall_trace_enter+0x1d3/0x2b0
   ? handle_mm_fault+0xaa/0x1c0
   do_group_exit+0x3a/0xa0
   __x64_sys_exit_group+0x14/0x20
   do_syscall_64+0x42/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run for a very long time given a large process. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

---
 mm/mmap.c | 1 +
 1 file changed, 1 insertion(+)
mm/mmap.c +1 -0
index a24e424770012..135cccce41f88 100644
@@ -2954,6 +2954,7 @@ void exit_mmap(struct mm_struct *mm)
 		if (vma->vm_flags & VM_ACCOUNT)
 			nr_accounted += vma_pages(vma);
 		vma = remove_vma(vma);
+		cond_resched();
 	}
 	vm_unacct_memory(nr_accounted);
 }
Signature · 1 line
2.25.1
author maintainer
#10 lore raw

PATCH 9/16 brcmfmac: To fix Bss Info flag definition Bug

In reply to Sasha Levin

From: Prasanna Kerekoppa <[email protected]>

[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]

Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

---
 drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +1 -1
index 4320c4cae53e1..7eb9f31dde1a2 100644
@@ -30,7 +30,7 @@
 #define BRCMF_ARP_OL_PEER_AUTO_REPLY	0x00000008
 
 #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
-#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
+#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0004
 
 #define BRCMF_STA_WME              0x00000002      /* WMM association */
 #define BRCMF_STA_AUTHE            0x00000008      /* Authenticated */
Signature · 1 line
2.25.1
author maintainer
#11 lore raw

PATCH 10/16 iwlegacy: Check the return value of pcie_capability_read_*()

In reply to Sasha Levin

From: Bolarinwa Olayemi Saheed <[email protected]>

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

---
 drivers/net/wireless/iwlegacy/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/iwlegacy/common.c +2 -2
index 544ab3750ea6e..c56febdae1349 100644
@@ -4294,8 +4294,8 @@ il_apm_init(struct il_priv *il)
 	 *    power savings, even without L1.
 	 */
 	if (il->cfg->set_l0s) {
-		pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
-		if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
+		ret = pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
+		if (!ret && (lctl & PCI_EXP_LNKCTL_ASPM_L1)) {
 			/* L1-ASPM enabled; disable(!) L0S  */
 			il_set_bit(il, CSR_GIO_REG,
 				   CSR_GIO_REG_VAL_L0S_ENABLED);
Signature · 1 line
2.25.1
author maintainer
#12 lore raw

PATCH 11/16 usb: gadget: net2280: fix memory leak on probe error handling paths

In reply to Sasha Levin

From: Evgeny Novikov <[email protected]>

[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]

Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet.

The patch fixes the bug like in other similar drivers.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/usb/gadget/udc/net2280.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/gadget/udc/net2280.c +3 -1
index 3a8d056a5d16b..48dd0da21e2b4 100644
@@ -3712,8 +3712,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 done:
-	if (dev)
+	if (dev) {
 		net2280_remove(pdev);
+		kfree(dev);
+	}
 	return retval;
 }
 
Signature · 1 line
2.25.1
author maintainer
#13 lore raw

PATCH 12/16 bdc: Fix bug causing crash after multiple disconnects

In reply to Sasha Levin

From: Sasi Kumar <[email protected]>

[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]

Multiple connects/disconnects can cause a crash on the second disconnect. The driver had a problem where it would try to send endpoint commands after it was disconnected which is not allowed by the hardware. The fix is to only allow the endpoint commands when the endpoint is connected. This will also fix issues that showed up when using configfs to create gadgets.

---
 drivers/usb/gadget/udc/bdc/bdc_core.c |  4 ++++
 drivers/usb/gadget/udc/bdc/bdc_ep.c   | 16 ++++++++++------
 2 files changed, 14 insertions(+), 6 deletions(-)
drivers/usb/gadget/udc/bdc/bdc_core.c +4 -0
index e9bd8d4abca00..f09a74d79c9eb 100644
@@ -286,6 +286,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 	 * in that case reinit is passed as 1
 	 */
 	if (reinit) {
+		int i;
 		/* Enable interrupts */
 		temp = bdc_readl(bdc->regs, BDC_BDCSC);
 		temp |= BDC_GIE;
@@ -295,6 +296,9 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 		/* Initialize SRR to 0 */
 		memset(bdc->srr.sr_bds, 0,
 					NUM_SR_ENTRIES * sizeof(struct bdc_bd));
+		/* clear ep flags to avoid post disconnect stops/deconfigs */
+		for (i = 1; i < bdc->num_eps; ++i)
+			bdc->bdc_ep_array[i]->flags = 0;
 	} else {
 		/* One time initiaization only */
 		/* Enable status report function pointers */
drivers/usb/gadget/udc/bdc/bdc_ep.c +10 -6
index 3a65272fbed86..9f5f18891ba85 100644
@@ -621,7 +621,6 @@ int bdc_ep_enable(struct bdc_ep *ep)
 	}
 	bdc_dbg_bd_list(bdc, ep);
 	/* only for ep0: config ep is called for ep0 from connect event */
-	ep->flags |= BDC_EP_ENABLED;
 	if (ep->ep_num == 1)
 		return ret;
 
@@ -767,10 +766,13 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
 					__func__, ep->name, start_bdi, end_bdi);
 	dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n",
 						ep, (void *)ep->usb_ep.desc);
-	/* Stop the ep to see where the HW is ? */
-	ret = bdc_stop_ep(bdc, ep->ep_num);
-	/* if there is an issue with stopping ep, then no need to go further */
-	if (ret)
+	/* if still connected, stop the ep to see where the HW is ? */
+	if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) {
+		ret = bdc_stop_ep(bdc, ep->ep_num);
+		/* if there is an issue, then no need to go further */
+		if (ret)
+			return 0;
+	} else
 		return 0;
 
 	/*
@@ -1921,7 +1923,9 @@ static int bdc_gadget_ep_disable(struct usb_ep *_ep)
 		__func__, ep->name, ep->flags);
 
 	if (!(ep->flags & BDC_EP_ENABLED)) {
-		dev_warn(bdc->dev, "%s is already disabled\n", ep->name);
+		if (bdc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_warn(bdc->dev, "%s is already disabled\n",
+				 ep->name);
 		return 0;
 	}
 	spin_lock_irqsave(&bdc->lock, flags);
Signature · 1 line
2.25.1
author maintainer
#14 lore raw

PATCH 13/16 dyndbg: fix a BUG_ON in ddebug_describe_flags

In reply to Sasha Levin

From: Jim Cromie <[email protected]>

[ Upstream commit f678ce8cc3cb2ad29df75d8824c74f36398ba871 ]

ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead.

Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked.

---
 lib/dynamic_debug.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)
lib/dynamic_debug.c +11 -12
index c6368ae93fe6e..f50d63f67899a 100644
@@ -85,22 +85,22 @@ static struct { unsigned flag:8; char opt_char; } opt_array[] = {
 	{ _DPRINTK_FLAGS_NONE, '_' },
 };
 
+struct flagsbuf { char buf[ARRAY_SIZE(opt_array)+1]; };
+
 /* format a string into buf[] which describes the _ddebug's flags */
-static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
-				    size_t maxlen)
+static char *ddebug_describe_flags(unsigned int flags, struct flagsbuf *fb)
 {
-	char *p = buf;
+	char *p = fb->buf;
 	int i;
 
-	BUG_ON(maxlen < 6);
 	for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
-		if (dp->flags & opt_array[i].flag)
+		if (flags & opt_array[i].flag)
 			*p++ = opt_array[i].opt_char;
-	if (p == buf)
+	if (p == fb->buf)
 		*p++ = '_';
 	*p = '\0';
 
-	return buf;
+	return fb->buf;
 }
 
 #define vpr_info(fmt, ...)					\
@@ -142,7 +142,7 @@ static int ddebug_change(const struct ddebug_query *query,
 	struct ddebug_table *dt;
 	unsigned int newflags;
 	unsigned int nfound = 0;
-	char flagbuf[10];
+	struct flagsbuf fbuf;
 
 	/* search for matching ddebugs */
 	mutex_lock(&ddebug_lock);
@@ -192,8 +192,7 @@ static int ddebug_change(const struct ddebug_query *query,
 			vpr_info("changed %s:%d [%s]%s =%s\n",
 				 trim_prefix(dp->filename), dp->lineno,
 				 dt->mod_name, dp->function,
-				 ddebug_describe_flags(dp, flagbuf,
-						       sizeof(flagbuf)));
+				 ddebug_describe_flags(dp->flags, &fbuf));
 		}
 	}
 	mutex_unlock(&ddebug_lock);
@@ -777,7 +776,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 {
 	struct ddebug_iter *iter = m->private;
 	struct _ddebug *dp = p;
-	char flagsbuf[10];
+	struct flagsbuf flags;
 
 	vpr_info("called m=%p p=%p\n", m, p);
 
@@ -790,7 +789,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 	seq_printf(m, "%s:%u [%s]%s =%s \"",
 		   trim_prefix(dp->filename), dp->lineno,
 		   iter->table->mod_name, dp->function,
-		   ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+		   ddebug_describe_flags(dp->flags, &flags));
 	seq_escape(m, dp->format, "\t\r\n\"");
 	seq_puts(m, "\"\n");
 
Signature · 1 line
2.25.1
author maintainer
#15 lore raw

PATCH 14/16 dyndbg: prefer declarative init in caller, to memset in callee

In reply to Sasha Levin

From: Jim Cromie <[email protected]>

[ Upstream commit 9c9d0acbe2793315fa6945a19685ad2a51fb281b ]

ddebug_exec_query declares an auto var, and passes it to ddebug_parse_query, which memsets it before using it. Drop that memset, instead initialize the variable in the caller; let the compiler decide how to do it.

---
 lib/dynamic_debug.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
lib/dynamic_debug.c +1 -2
index f50d63f67899a..953d81d58fe76 100644
@@ -318,7 +318,6 @@ static int ddebug_parse_query(char *words[], int nwords,
 		pr_err("expecting pairs of match-spec <value>\n");
 		return -EINVAL;
 	}
-	memset(query, 0, sizeof(*query));
 
 	if (modname)
 		/* support $modname.dyndbg=<multiple queries> */
@@ -436,7 +435,7 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
 static int ddebug_exec_query(char *query_string, const char *modname)
 {
 	unsigned int flags = 0, mask = 0;
-	struct ddebug_query query;
+	struct ddebug_query query = {};
 #define MAXWORDS 9
 	int nwords, nfound;
 	char *words[MAXWORDS];
Signature · 1 line
2.25.1
author maintainer
#16 lore raw

PATCH 15/16 bcache: fix super block seq numbers comparision in register_cache_set()

In reply to Sasha Levin

From: Coly Li <[email protected]>

[ Upstream commit 117f636ea695270fe492d0c0c9dfadc7a662af47 ]

In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {

2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);

2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly.

But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered.

This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device.

---
 drivers/md/bcache/super.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/md/bcache/super.c +8 -1
index df8f1e69077f6..23ffd4469dabb 100644
@@ -1778,7 +1778,14 @@ static const char *register_cache_set(struct cache *ca)
 	    sysfs_create_link(&c->kobj, &ca->kobj, buf))
 		goto err;
 
-	if (ca->sb.seq > c->sb.seq) {
+	/*
+	 * A special case is both ca->sb.seq and c->sb.seq are 0,
+	 * such condition happens on a new created cache device whose
+	 * super block is never flushed yet. In this case c->sb.version
+	 * and other members should be updated too, otherwise we will
+	 * have a mistaken super block version in cache set.
+	 */
+	if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
 		c->sb.version		= ca->sb.version;
 		memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
 		c->sb.flags             = ca->sb.flags;
Signature · 1 line
2.25.1
author maintainer
#17 lore raw

PATCH 16/16 ACPICA: Do not increment operation_region reference counts for field units

In reply to Sasha Levin

From: Erik Kaneda <[email protected]>

[ Upstream commit 6a54ebae6d047c988a31f5ac5a64ab5cf83797a2 ]

ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70

Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects.

Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region.

This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object.

---
 drivers/acpi/acpica/exprep.c   | 4 ----
 drivers/acpi/acpica/utdelete.c | 6 +-----
 2 files changed, 1 insertion(+), 9 deletions(-)
drivers/acpi/acpica/exprep.c +0 -4
index 4c2836dc825be..47d8a85c90ff5 100644
@@ -502,10 +502,6 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 				    (u8)access_byte_width;
 			}
 		}
-		/* An additional reference for the container */
-
-		acpi_ut_add_reference(obj_desc->field.region_obj);
-
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 				  "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
 				  obj_desc->field.start_field_bit_offset,
drivers/acpi/acpica/utdelete.c +1 -5
index 1638312e3d8f9..9f8b088e21d7e 100644
@@ -590,11 +590,6 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 			next_object = object->buffer_field.buffer_obj;
 			break;
 
-		case ACPI_TYPE_LOCAL_REGION_FIELD:
-
-			next_object = object->field.region_obj;
-			break;
-
 		case ACPI_TYPE_LOCAL_BANK_FIELD:
 
 			next_object = object->bank_field.bank_obj;
@@ -635,6 +630,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 			}
 			break;
 
+		case ACPI_TYPE_LOCAL_REGION_FIELD:
 		case ACPI_TYPE_REGION:
 		default:
 
Signature · 1 line
2.25.1