Skip to contentSkip to conversation

Driver-API: Documentation: Replace deprecated :c:func: Usage

PATCH In review Puranjay Mohan 3 participants 4 messages Aug 10, 2020 – Aug 11, 2020 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Driver-API: Documentation: Replace deprecated :c:func: Usage

Replace :c:func: with func() as the previous usage is deprecated.

---
 Documentation/driver-api/device-io.rst | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
Documentation/driver-api/device-io.rst +11 -11
index 0e389378f71d..764963876d08 100644
@@ -36,14 +36,14 @@ are starting with one. Physical addresses are of type unsigned long.
 
 This address should not be used directly. Instead, to get an address
 suitable for passing to the accessor functions described below, you
-should call :c:func:`ioremap()`. An address suitable for accessing
+should call ioremap(). An address suitable for accessing
 the device will be returned to you.
 
 After you've finished using the device (say, in your module's exit
-routine), call :c:func:`iounmap()` in order to return the address
+routine), call iounmap() in order to return the address
 space to the kernel. Most architectures allocate new address space each
-time you call :c:func:`ioremap()`, and they can run out unless you
-call :c:func:`iounmap()`.
+time you call ioremap(), and they can run out unless you
+call iounmap().
 
 Accessing the device
 --------------------
@@ -60,8 +60,8 @@ readb_relaxed(), readw_relaxed(), readl_relaxed(), readq_relaxed(),
 writeb(), writew(), writel() and writeq().
 
 Some devices (such as framebuffers) would like to use larger transfers than
-8 bytes at a time. For these devices, the :c:func:`memcpy_toio()`,
-:c:func:`memcpy_fromio()` and :c:func:`memset_io()` functions are
+8 bytes at a time. For these devices, the memcpy_toio(),
+memcpy_fromio() and memset_io() functions are
 provided. Do not use memset or memcpy on IO addresses; they are not
 guaranteed to copy data in order.
 
@@ -135,15 +135,15 @@ Accessing Port Space
 
 Accesses to this space are provided through a set of functions which
 allow 8-bit, 16-bit and 32-bit accesses; also known as byte, word and
-long. These functions are :c:func:`inb()`, :c:func:`inw()`,
-:c:func:`inl()`, :c:func:`outb()`, :c:func:`outw()` and
-:c:func:`outl()`.
+long. These functions are inb(), inw(),
+inl(), outb(), outw() and
+outl().
 
 Some variants are provided for these functions. Some devices require
 that accesses to their ports are slowed down. This functionality is
 provided by appending a ``_p`` to the end of the function.
-There are also equivalents to memcpy. The :c:func:`ins()` and
-:c:func:`outs()` functions copy bytes, words or longs to the given
+There are also equivalents to memcpy. The ins() and
+outs() functions copy bytes, words or longs to the given
 port.
 
 Public Functions Provided
Signature · 1 line
2.27.0
#1 lore raw
Quoted 1 line · Puranjay Mohan

Replace :c:func: with func() as the previous usage is deprecated.

Generally, reflowing text as part of these patches is discouraged, but I'd make an exception here:

Documentation/driver-api/device-io.rst Accessing Port Space · line 140

Quoted 10 lines
Documentation/driver-api/device-io.rst +3 -3
@@ -135,15 +135,15 @@ Accessing Port Space
 
 Accesses to this space are provided through a set of functions which
 allow 8-bit, 16-bit and 32-bit accesses; also known as byte, word and
-long. These functions are :c:func:`inb()`, :c:func:`inw()`,
-:c:func:`inl()`, :c:func:`outb()`, :c:func:`outw()` and
-:c:func:`outl()`.
+long. These functions are inb(), inw(),
+inl(), outb(), outw() and
+outl().

...
+long. These functions are inb(), inw(), inl(), outb(), outw() and outl().

The others are more of a judgement call where we could go either way.

#3 lore raw
Quoted 11 lines · Jonathan Corbet
Quoted 6 lines · On Mon, 10 Aug 2020 23:51:07 +0530 Puranjay Mohan <[email protected]> wrote:

Replace :c:func: with func() as the previous usage is deprecated.

---
 Documentation/driver-api/device-io.rst | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

I applied this patch from you in early July, and it's in mainline now...?

this is a new patch with same name I think?, this is not that patch.

Quoted 3 lines

jon

thanks,
puranjay