Skip to contentSkip to conversation

i2c: iproc: Fix checkpatch warnings by using 'BIT' macro

PATCH Applied Ray Jui 3 participants 3 messages Aug 14, 2020 – Aug 25, 2020

Subsystems (2)
lore
Share & tools
lore

Ray Jui

author
#0 lore raw

PATCH 1/1 i2c: iproc: Fix checkpatch warnings by using 'BIT' macro

Fix additional checkpatch warnings in the iProc I2C driver by using 'BIT' marcro.

---
 drivers/i2c/busses/i2c-bcm-iproc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/i2c/busses/i2c-bcm-iproc.c +2 -2
index 688e92818821..d8295b1c379d 100644
@@ -720,7 +720,7 @@ static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
 
 			/* mark the last byte */
 			if (!process_call && (i == msg->len - 1))
-				val |= 1 << M_TX_WR_STATUS_SHIFT;
+				val |= BIT(M_TX_WR_STATUS_SHIFT);
 
 			iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
 		}
@@ -738,7 +738,7 @@ static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
 		 */
 		addr = i2c_8bit_addr_from_msg(msg);
 		/* mark it the last byte out */
-		val = addr | (1 << M_TX_WR_STATUS_SHIFT);
+		val = addr | BIT(M_TX_WR_STATUS_SHIFT);
 		iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
 	}
 
Signature · 1 line
2.17.1