Skip to contentSkip to conversation

mini-os: correct memory access rights for pvh mode

PATCH Applied Juergen Gross 3 participants 3 messages Aug 15, 2020 – Aug 17, 2020 x86

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mini-os: correct memory access rights for pvh mode

When running as a PVH guest the memory access rights are not set
correctly: _PAGE_USER should not be set and CR0.WP should be set. Especially CR0.WP is important in order to let the allocate on demand feature work, as it requires a page fault when writing to a read-only page.

---
 arch/x86/x86_hvm.S    |  2 +-
 include/x86/arch_mm.h | 18 ++++++++++++------
 include/x86/os.h      |  1 +
 3 files changed, 14 insertions(+), 7 deletions(-)
arch/x86/x86_hvm.S +1 -1
index 6e8ad98..42a5f02 100644
@@ -20,7 +20,7 @@ _start:
 #endif /* __x86_64__ */
 
         mov %cr0, %eax
-        or $X86_CR0_PG, %eax
+        or $(X86_CR0_PG | X86_CR0_WP), %eax
         mov %eax, %cr0
 
         lgdt gdt_ptr
include/x86/arch_mm.h +12 -6
index cbbeb21..ffbec5a 100644
@@ -171,17 +171,23 @@ typedef unsigned long pgentry_t;
 #define _PAGE_PSE      CONST(0x080)
 #define _PAGE_GLOBAL   CONST(0x100)
 
+#ifdef CONFIG_PARAVIRT
+#define PAGE_USER _PAGE_USER
+#else
+#define PAGE_USER CONST(0)
+#endif
+
 #if defined(__i386__)
 #define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED)
 #define L1_PROT_RO (_PAGE_PRESENT|_PAGE_ACCESSED)
-#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY |_PAGE_USER)
+#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY |PAGE_USER)
 #define L3_PROT (_PAGE_PRESENT)
 #elif defined(__x86_64__)
-#define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_USER)
-#define L1_PROT_RO (_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_USER)
-#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|_PAGE_USER)
-#define L3_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|_PAGE_USER)
-#define L4_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|_PAGE_USER)
+#define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|PAGE_USER)
+#define L1_PROT_RO (_PAGE_PRESENT|_PAGE_ACCESSED|PAGE_USER)
+#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|PAGE_USER)
+#define L3_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|PAGE_USER)
+#define L4_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|PAGE_USER)
 #endif /* __i386__ || __x86_64__ */
 
 /* flags for ioremap */
include/x86/os.h +1 -0
index a73b63e..46a824d 100644
@@ -27,6 +27,7 @@
 #define MSR_EFER          0xc0000080
 #define _EFER_LME         8             /* Long mode enable */
 
+#define X86_CR0_WP        0x00010000    /* Write protect */
 #define X86_CR0_PG        0x80000000    /* Paging */
 #define X86_CR4_PAE       0x00000020    /* enable physical address extensions */
 #define X86_CR4_OSFXSR    0x00000200    /* enable fast FPU save and restore */
Signature · 1 line
2.26.2
Reviewed-by on v1 1/1
#1 lore raw

Juergen Gross, le sam. 15 août 2020 13:15:57 +0200, a ecrit:

Quoted 7 lines

When running as a PVH guest the memory access rights are not set
correctly: _PAGE_USER should not be set and CR0.WP should be set. Especially CR0.WP is important in order to let the allocate on demand feature work, as it requires a page fault when writing to a read-only page.

Quoted 68 lines
---
 arch/x86/x86_hvm.S    |  2 +-
 include/x86/arch_mm.h | 18 ++++++++++++------
 include/x86/os.h      |  1 +
 3 files changed, 14 insertions(+), 7 deletions(-)
arch/x86/x86_hvm.S +1 -1
index 6e8ad98..42a5f02 100644
@@ -20,7 +20,7 @@ _start:
 #endif /* __x86_64__ */
 
         mov %cr0, %eax
-        or $X86_CR0_PG, %eax
+        or $(X86_CR0_PG | X86_CR0_WP), %eax
         mov %eax, %cr0
 
         lgdt gdt_ptr
include/x86/arch_mm.h +12 -6
index cbbeb21..ffbec5a 100644
@@ -171,17 +171,23 @@ typedef unsigned long pgentry_t;
 #define _PAGE_PSE      CONST(0x080)
 #define _PAGE_GLOBAL   CONST(0x100)
 
+#ifdef CONFIG_PARAVIRT
+#define PAGE_USER _PAGE_USER
+#else
+#define PAGE_USER CONST(0)
+#endif
+
 #if defined(__i386__)
 #define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED)
 #define L1_PROT_RO (_PAGE_PRESENT|_PAGE_ACCESSED)
-#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY |_PAGE_USER)
+#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY |PAGE_USER)
 #define L3_PROT (_PAGE_PRESENT)
 #elif defined(__x86_64__)
-#define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_USER)
-#define L1_PROT_RO (_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_USER)
-#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|_PAGE_USER)
-#define L3_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|_PAGE_USER)
-#define L4_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|_PAGE_USER)
+#define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|PAGE_USER)
+#define L1_PROT_RO (_PAGE_PRESENT|_PAGE_ACCESSED|PAGE_USER)
+#define L2_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|PAGE_USER)
+#define L3_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|PAGE_USER)
+#define L4_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY|PAGE_USER)
 #endif /* __i386__ || __x86_64__ */
 
 /* flags for ioremap */
include/x86/os.h +1 -0
index a73b63e..46a824d 100644
@@ -27,6 +27,7 @@
 #define MSR_EFER          0xc0000080
 #define _EFER_LME         8             /* Long mode enable */
 
+#define X86_CR0_WP        0x00010000    /* Write protect */
 #define X86_CR0_PG        0x80000000    /* Paging */
 #define X86_CR4_PAE       0x00000020    /* enable physical address extensions */
 #define X86_CR4_OSFXSR    0x00000200    /* enable fast FPU save and restore */
Signature · 1 line
2.26.2
Signature · 2 lines
Samuel
<y> la vraie vie, c'est quand le prompt passe de $ à #
Applied
#2 lore raw
Quoted 10 lines · Samuel Thibault

Juergen Gross, le sam. 15 août 2020 13:15:57 +0200, a ecrit:

Quoted 7 lines

When running as a PVH guest the memory access rights are not set
correctly: _PAGE_USER should not be set and CR0.WP should be set. Especially CR0.WP is important in order to let the allocate on demand feature work, as it requires a page fault when writing to a read-only page.

Applied.