pc-bios: s390x: Only set lowcore iplb address on list-directed IPL
PATCH 1/1 pc-bios: s390x: Only set lowcore iplb address on list-directed IPL
The POP states that the IPLB location is only written to 0x14 for list-directed IPL. Some operating systems expect 0x14 to not change on boot and will fail IPL if it does change.
--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
pc-bios/s390-ccw/jump2ipl.c +4 -1
@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {
Signature · 1 line
2.21.1
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0
Should be
Quoted 11 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)pc-bios/s390-ccw/jump2ipl.c +0
-0
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 8 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }
What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for S390_IPL_TYPE_FCP?
Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {
Quoted 19 lines · Cornelia Huck
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0Should be
Fixes 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")Quoted 6 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
Quoted 21 lines
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 13 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for
S390_IPL_TYPE_FCP?Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {
Based on my (admittedly limited) understanding of the architecture and code, I believe write_iplb_location() should be called at least for S390_IPL_TYPE_FCP but I'm not 100% sure on S390_IPL_TYPE_QEMU_SCSI. Perhaps Janosch has an idea?
It was originally unconditional, and my new conditional excludes vfio CCW which is definitely a step in the right direction, in any case :).
Signature · 1 line
-- Jason J. Herne ([email protected])
Quoted 42 lines · Jason J. Herne
Quoted 19 lines · Cornelia Huck
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0Should be
Fixes 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")Quoted 6 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Quoted 21 lines
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 13 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for
S390_IPL_TYPE_FCP?Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {
Quoted 7 lines
Based on my (admittedly limited) understanding of the architecture and code, I believe
write_iplb_location()should be called at least forS390_IPL_TYPE_FCPbut I'm not 100% sure onS390_IPL_TYPE_QEMU_SCSI. Perhaps Janosch has an idea?It was originally unconditional, and my new conditional excludes vfio CCW which is definitely a step in the right direction, in any case :).
If I remember correctly the problem was that ZIPL used the IPLB lowcore ptr without checking how it was booted (CCW or FCP). That was fixed in mid of July by testing if diag308 gives back a config or not.
So we might have a deadlock situation here which I need to think about for a bit. I'm setting Viktor CC to get a bit more information about the state of the zipl backports into the distros.
Quoted 48 lines · On Wed, 19 Aug 2020 11:32:34 +0200 Janosch Frank <[email protected]> wrote:
Quoted 47 lines · Jason J. Herne
Quoted 19 lines · Cornelia Huck
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0Should be
Fixes 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")Quoted 6 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Quoted 21 lines
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 13 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for
S390_IPL_TYPE_FCP?Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {Based on my (admittedly limited) understanding of the architecture and code, I believe
write_iplb_location()should be called at least forS390_IPL_TYPE_FCPbut I'm not 100% sure onS390_IPL_TYPE_QEMU_SCSI. Perhaps Janosch has an idea?
Quoted 6 lines
Quoted 2 lines
It was originally unconditional, and my new conditional excludes vfio CCW which is definitely a step in the right direction, in any case :).
If I remember correctly the problem was that ZIPL used the IPLB lowcore ptr without checking how it was booted (CCW or FCP). That was fixed in mid of July by testing if diag308 gives back a config or not.
So we have the problem that old zipl relies on the presence of a value that must not be there if you follow the architecture? Nasty.
(Is it really "must not change" vs "don't expect anything here"? Not sure if I'm looking at the right part of the documentation.)
Quoted 3 lines
So we might have a deadlock situation here which I need to think about for a bit. I'm setting Viktor CC to get a bit more information about the state of the zipl backports into the distros.
Changing this is problematic unless everything we support as a guest is fixed. Does the guest go boom in a way that it is at least easy to figure out what went wrong? What breaks when the value continues to be set?
Quoted 58 lines · Cornelia Huck
Quoted 48 lines · On Wed, 19 Aug 2020 11:32:34 +0200 Janosch Frank <[email protected]> wrote:
Quoted 47 lines · Jason J. Herne
Quoted 19 lines · Cornelia Huck
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0Should be
Fixes 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")Quoted 6 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Quoted 21 lines
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 13 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for
S390_IPL_TYPE_FCP?Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {Based on my (admittedly limited) understanding of the architecture and code, I believe
write_iplb_location()should be called at least forS390_IPL_TYPE_FCPbut I'm not 100% sure onS390_IPL_TYPE_QEMU_SCSI. Perhaps Janosch has an idea?Quoted 6 lines
Quoted 2 lines
It was originally unconditional, and my new conditional excludes vfio CCW which is definitely a step in the right direction, in any case :).
If I remember correctly the problem was that ZIPL used the IPLB lowcore ptr without checking how it was booted (CCW or FCP). That was fixed in mid of July by testing if diag308 gives back a config or not.
Quoted 5 lines
So we have the problem that old zipl relies on the presence of a value that must not be there if you follow the architecture? Nasty.
(Is it really "must not change" vs "don't expect anything here"? Not sure if I'm looking at the right part of the documentation.)
Well if the loaded program overwrites absolute 0x0, we shouldn't modify it if we are not explicitly allowed to, no?
We already talked about saving the exception new addresses and restoring them before jumping to the new kernel. I think we might need to go a step further and use a non zero prefix for the bios to avoid any changes to absolute 0x0.
However that wouldn't fix this dilemma.
Quoted 10 lines
Quoted 4 lines
So we might have a deadlock situation here which I need to think about for a bit. I'm setting Viktor CC to get a bit more information about the state of the zipl backports into the distros.
Changing this is problematic unless everything we support as a guest is fixed. Does the guest go boom in a way that it is at least easy to figure out what went wrong? What breaks when the value continues to be set?
I think it goes into disabled wait because of the failed secure boot verification or gets a PGM Addressing and then goes into disabled wait, so no, not very user friendly.
Quoted 68 lines · Janosch Frank
Quoted 58 lines · Cornelia Huck
Quoted 48 lines · On Wed, 19 Aug 2020 11:32:34 +0200 Janosch Frank <[email protected]> wrote:
Quoted 47 lines · Jason J. Herne
Quoted 19 lines · Cornelia Huck
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0Should be
Fixes 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")Quoted 6 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Quoted 21 lines
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 13 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for
S390_IPL_TYPE_FCP?Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {Based on my (admittedly limited) understanding of the architecture and code, I believe
write_iplb_location()should be called at least forS390_IPL_TYPE_FCPbut I'm not 100% sure onS390_IPL_TYPE_QEMU_SCSI. Perhaps Janosch has an idea?Quoted 6 lines
Quoted 2 lines
It was originally unconditional, and my new conditional excludes vfio CCW which is definitely a step in the right direction, in any case :).
If I remember correctly the problem was that ZIPL used the IPLB lowcore ptr without checking how it was booted (CCW or FCP). That was fixed in mid of July by testing if diag308 gives back a config or not.
Quoted 5 lines
So we have the problem that old zipl relies on the presence of a value that must not be there if you follow the architecture? Nasty.
(Is it really "must not change" vs "don't expect anything here"? Not sure if I'm looking at the right part of the documentation.)
Well if the loaded program overwrites absolute
0x0, we shouldn't modify it if we are not explicitly allowed to, no?
Quoted 6 lines
We already talked about saving the exception new addresses and restoring them before jumping to the new kernel. I think we might need to go a step further and use a non zero prefix for the bios to avoid any changes to absolute
0x0.However that wouldn't fix this dilemma.
Sorry, I'm just back from summer vacation ... so what's the conclusion for Jason's patch here? Should it be included as-is now or do we rather neeed another rework here instead?
Thomas
Quoted 74 lines · Thomas Huth
Quoted 73 lines · Janosch Frank
Quoted 58 lines · Cornelia Huck
Quoted 48 lines · On Wed, 19 Aug 2020 11:32:34 +0200 Janosch Frank <[email protected]> wrote:
Quoted 47 lines · Jason J. Herne
Quoted 19 lines · Cornelia Huck
Quoted 5 lines · On Mon, 17 Aug 2020 10:17:34 -0400 "Jason J. Herne" <[email protected]>…
The POP states that the IPLB location is only written to
0x14for list-directed IPL. Some operating systems expect0x14to not change on boot and will fail IPL if it does change.Fixes 9bfc04f9ef6802fff0Should be
Fixes 9bfc04f9ef68 ("pc-bios: s390x: Save iplb location in lowcore")Quoted 6 lines
Signed-off-by Jason J. Herne <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Quoted 21 lines
pc-bios/s390-ccw/jump2ipl.c void jump_to_IPL_code(uint64_t address) · line 39
Quoted 13 lines
pc-bios/s390-ccw/jump2ipl.c +4
-1@@ -33,7 +33,10 @@ void jump_to_IPL_code(uint64_t address) {/* store the subsystem information _after_ the bootmap was loaded */ write_subsystem_identification (); -write_iplb_location (); + +if (iplb.pbt !=S390_IPL_TYPE_CCW ) { +write_iplb_location (); + }What happens for ipl types other than CCW and FCP? IOW, should that rather be a positive check for
S390_IPL_TYPE_FCP?Quoted 3 lines
pc-bios/s390-ccw/jump2ipl.c +0
-0/* prevent unknown IPL types in the guest */ if (iplb.pbt ==S390_IPL_TYPE_QEMU_SCSI ) {Based on my (admittedly limited) understanding of the architecture and code, I believe
write_iplb_location()should be called at least forS390_IPL_TYPE_FCPbut I'm not 100% sure onS390_IPL_TYPE_QEMU_SCSI. Perhaps Janosch has an idea?Quoted 6 lines
Quoted 2 lines
It was originally unconditional, and my new conditional excludes vfio CCW which is definitely a step in the right direction, in any case :).
If I remember correctly the problem was that ZIPL used the IPLB lowcore ptr without checking how it was booted (CCW or FCP). That was fixed in mid of July by testing if diag308 gives back a config or not.
Quoted 5 lines
So we have the problem that old zipl relies on the presence of a value that must not be there if you follow the architecture? Nasty.
(Is it really "must not change" vs "don't expect anything here"? Not sure if I'm looking at the right part of the documentation.)
Well if the loaded program overwrites absolute
0x0, we shouldn't modify it if we are not explicitly allowed to, no?We already talked about saving the exception new addresses and restoring them before jumping to the new kernel. I think we might need to go a step further and use a non zero prefix for the bios to avoid any changes to absolute
0x0.
Quoted 8 lines
Quoted 1 line
However that wouldn't fix this dilemma.
Sorry, I'm just back from summer vacation ... so what's the conclusion for Jason's patch here? Should it be included as-is now or do we rather neeed another rework here instead?
Thomas
After some discussion we've decided to keep this internal for now. As it turns out, Janosch plans on making some changes here that will remove the need for this fix. So we'll just use it internally for our own testing purposes until that time.
Sorry for the noise :)
Signature · 1 line
-- Jason J. Herne ([email protected])