Skip to contentSkip to conversation

5.7.16-rc1 review

PATCH In review Greg Kroah-Hartman 6 participants 399 messages Aug 17, 2020 – Aug 18, 2020 Page 2 of 3

Subsystems (4)
lore
Share & tools
lore
author maintainer
#161 lore raw

PATCH 161/393 net: atlantic: MACSec offload statistics checkpatch fix

In reply to Greg Kroah-Hartman

From: Mark Starovoytov <[email protected]>

[ Upstream commit 3a8b44546979cf682324bd2fd61e539f428911b4 ]

This patch fixes a checkpatch warning.

Fixes aec0f1aac58e ("net: atlantic: MACSec offload statistics implementation")
---
 drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c +3 -3
index 7241cf92b43a5..446c59f2ab448 100644
@@ -123,21 +123,21 @@ static const char aq_macsec_stat_names[][ETH_GSTRING_LEN] = {
 	"MACSec OutUnctrlHitDropRedir",
 };
 
-static const char *aq_macsec_txsc_stat_names[] = {
+static const char * const aq_macsec_txsc_stat_names[] = {
 	"MACSecTXSC%d ProtectedPkts",
 	"MACSecTXSC%d EncryptedPkts",
 	"MACSecTXSC%d ProtectedOctets",
 	"MACSecTXSC%d EncryptedOctets",
 };
 
-static const char *aq_macsec_txsa_stat_names[] = {
+static const char * const aq_macsec_txsa_stat_names[] = {
 	"MACSecTXSC%dSA%d HitDropRedirect",
 	"MACSecTXSC%dSA%d Protected2Pkts",
 	"MACSecTXSC%dSA%d ProtectedPkts",
 	"MACSecTXSC%dSA%d EncryptedPkts",
 };
 
-static const char *aq_macsec_rxsa_stat_names[] = {
+static const char * const aq_macsec_rxsa_stat_names[] = {
 	"MACSecRXSC%dSA%d UntaggedHitPkts",
 	"MACSecRXSC%dSA%d CtrlHitDrpRedir",
 	"MACSecRXSC%dSA%d NotUsingSa",
Signature · 1 line
2.25.1
author maintainer
#162 lore raw

PATCH 162/393 scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 040ab9c4fd0070cd5fa71ba3a7b95b8470db9b4d ]

The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases.

---
 drivers/scsi/arm/cumana_2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/arm/cumana_2.c +1 -1
index a1f3e9ee4e639..14e1d001253c4 100644
@@ -450,7 +450,7 @@ static int cumanascsi2_probe(struct expansion_card *ec,
 
 	if (info->info.scsi.dma != NO_DMA)
 		free_dma(info->info.scsi.dma);
-	free_irq(ec->irq, host);
+	free_irq(ec->irq, info);
 
  out_release:
 	fas216_release(host);
Signature · 1 line
2.25.1
author maintainer
#163 lore raw

PATCH 163/393 drm/mipi: use dcs write for mipi_dsi_dcs_set_tear_scanline

In reply to Greg Kroah-Hartman

From: Emil Velikov <[email protected]>

[ Upstream commit 7a05c3b6d24b8460b3cec436cf1d33fac43c8450 ]

The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently using the generic write. This does not look right.

Perhaps some platforms don't distinguish between the two writers?

Cc Robert Chiras <[email protected]>
Cc Vinay Simha BN <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Thierry Reding <[email protected]>
Fixes e83950816367 ("drm/dsi: Implement set tear scanline")
---
 drivers/gpu/drm/drm_mipi_dsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_mipi_dsi.c +3 -3
index 55531895dde6d..37b03fefbdf6f 100644
@@ -1082,11 +1082,11 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
  */
 int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
 {
-	u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
-			  scanline & 0xff };
+	u8 payload[2] = { scanline >> 8, scanline & 0xff };
 	ssize_t err;
 
-	err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_SCANLINE, payload,
+				 sizeof(payload));
 	if (err < 0)
 		return err;
 
Signature · 1 line
2.25.1
author maintainer
#164 lore raw

PATCH 164/393 cxl: Fix kobject memleak

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 85c5cbeba8f4fb28e6b9bfb3e467718385f78f76 ]

Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject.

Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add().

---
 drivers/misc/cxl/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/cxl/sysfs.c +1 -1
index f0263d1a1fdf2..d97a243ad30c0 100644
@@ -624,7 +624,7 @@ static struct afu_config_record *cxl_sysfs_afu_new_cr(struct cxl_afu *afu, int c
 	rc = kobject_init_and_add(&cr->kobj, &afu_config_record_type,
 				  &afu->dev.kobj, "cr%i", cr->cr);
 	if (rc)
-		goto err;
+		goto err1;
 
 	rc = sysfs_create_bin_file(&cr->kobj, &cr->config_attr);
 	if (rc)
Signature · 1 line
2.25.1
author maintainer
#165 lore raw

PATCH 165/393 lkdtm: Avoid more compiler optimizations for bad writes

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit 464e86b4abadfc490f426954b431e2ec6a9d7bd2 ]

It seems at least Clang is able to throw away writes it knows are destined for read-only memory, which makes things like the WRITE_RO test fail, as the write gets elided. Instead, force the variable to be volatile, and make similar changes through-out other tests in an effort to avoid needing to repeat fixing these kinds of problems. Also includes pr_err() calls in failure paths so that kernel logs are more clear in the failure case.

---
 drivers/misc/lkdtm/bugs.c     | 11 +++++------
 drivers/misc/lkdtm/perms.c    | 22 +++++++++++++++-------
 drivers/misc/lkdtm/usercopy.c |  7 +++++--
 3 files changed, 25 insertions(+), 15 deletions(-)
drivers/misc/lkdtm/bugs.c +5 -6
index 886459e0ddd98..e1b43f6155496 100644
@@ -118,9 +118,8 @@ noinline void lkdtm_CORRUPT_STACK(void)
 	/* Use default char array length that triggers stack protection. */
 	char data[8] __aligned(sizeof(void *));
 
-	__lkdtm_CORRUPT_STACK(&data);
-
-	pr_info("Corrupted stack containing char array ...\n");
+	pr_info("Corrupting stack containing char array ...\n");
+	__lkdtm_CORRUPT_STACK((void *)&data);
 }
 
 /* Same as above but will only get a canary with -fstack-protector-strong */
@@ -131,9 +130,8 @@ noinline void lkdtm_CORRUPT_STACK_STRONG(void)
 		unsigned long *ptr;
 	} data __aligned(sizeof(void *));
 
-	__lkdtm_CORRUPT_STACK(&data);
-
-	pr_info("Corrupted stack containing union ...\n");
+	pr_info("Corrupting stack containing union ...\n");
+	__lkdtm_CORRUPT_STACK((void *)&data);
 }
 
 void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void)
@@ -248,6 +246,7 @@ void lkdtm_ARRAY_BOUNDS(void)
 
 	kfree(not_checked);
 	kfree(checked);
+	pr_err("FAIL: survived array bounds overflow!\n");
 }
 
 void lkdtm_CORRUPT_LIST_ADD(void)
drivers/misc/lkdtm/perms.c +15 -7
index 62f76d506f040..2dede2ef658f3 100644
@@ -57,6 +57,7 @@ static noinline void execute_location(void *dst, bool write)
 	}
 	pr_info("attempting bad execution at %px\n", func);
 	func();
+	pr_err("FAIL: func returned\n");
 }
 
 static void execute_user_location(void *dst)
@@ -75,20 +76,22 @@ static void execute_user_location(void *dst)
 		return;
 	pr_info("attempting bad execution at %px\n", func);
 	func();
+	pr_err("FAIL: func returned\n");
 }
 
 void lkdtm_WRITE_RO(void)
 {
-	/* Explicitly cast away "const" for the test. */
-	unsigned long *ptr = (unsigned long *)&rodata;
+	/* Explicitly cast away "const" for the test and make volatile. */
+	volatile unsigned long *ptr = (unsigned long *)&rodata;
 
 	pr_info("attempting bad rodata write at %px\n", ptr);
 	*ptr ^= 0xabcd1234;
+	pr_err("FAIL: survived bad write\n");
 }
 
 void lkdtm_WRITE_RO_AFTER_INIT(void)
 {
-	unsigned long *ptr = &ro_after_init;
+	volatile unsigned long *ptr = &ro_after_init;
 
 	/*
 	 * Verify we were written to during init. Since an Oops
@@ -102,19 +105,21 @@ void lkdtm_WRITE_RO_AFTER_INIT(void)
 
 	pr_info("attempting bad ro_after_init write at %px\n", ptr);
 	*ptr ^= 0xabcd1234;
+	pr_err("FAIL: survived bad write\n");
 }
 
 void lkdtm_WRITE_KERN(void)
 {
 	size_t size;
-	unsigned char *ptr;
+	volatile unsigned char *ptr;
 
 	size = (unsigned long)do_overwritten - (unsigned long)do_nothing;
 	ptr = (unsigned char *)do_overwritten;
 
 	pr_info("attempting bad %zu byte write at %px\n", size, ptr);
-	memcpy(ptr, (unsigned char *)do_nothing, size);
+	memcpy((void *)ptr, (unsigned char *)do_nothing, size);
 	flush_icache_range((unsigned long)ptr, (unsigned long)(ptr + size));
+	pr_err("FAIL: survived bad write\n");
 
 	do_overwritten();
 }
@@ -193,9 +198,11 @@ void lkdtm_ACCESS_USERSPACE(void)
 	pr_info("attempting bad read at %px\n", ptr);
 	tmp = *ptr;
 	tmp += 0xc0dec0de;
+	pr_err("FAIL: survived bad read\n");
 
 	pr_info("attempting bad write at %px\n", ptr);
 	*ptr = tmp;
+	pr_err("FAIL: survived bad write\n");
 
 	vm_munmap(user_addr, PAGE_SIZE);
 }
@@ -203,19 +210,20 @@ void lkdtm_ACCESS_USERSPACE(void)
 void lkdtm_ACCESS_NULL(void)
 {
 	unsigned long tmp;
-	unsigned long *ptr = (unsigned long *)NULL;
+	volatile unsigned long *ptr = (unsigned long *)NULL;
 
 	pr_info("attempting bad read at %px\n", ptr);
 	tmp = *ptr;
 	tmp += 0xc0dec0de;
+	pr_err("FAIL: survived bad read\n");
 
 	pr_info("attempting bad write at %px\n", ptr);
 	*ptr = tmp;
+	pr_err("FAIL: survived bad write\n");
 }
 
 void __init lkdtm_perms_init(void)
 {
 	/* Make sure we can write to __ro_after_init values during __init */
 	ro_after_init |= 0xAA;
-
 }
drivers/misc/lkdtm/usercopy.c +5 -2
index e172719dd86d0..b833367a45d05 100644
@@ -304,19 +304,22 @@ void lkdtm_USERCOPY_KERNEL(void)
 		return;
 	}
 
-	pr_info("attempting good copy_to_user from kernel rodata\n");
+	pr_info("attempting good copy_to_user from kernel rodata: %px\n",
+		test_text);
 	if (copy_to_user((void __user *)user_addr, test_text,
 			 unconst + sizeof(test_text))) {
 		pr_warn("copy_to_user failed unexpectedly?!\n");
 		goto free_user;
 	}
 
-	pr_info("attempting bad copy_to_user from kernel text\n");
+	pr_info("attempting bad copy_to_user from kernel text: %px\n",
+		vm_mmap);
 	if (copy_to_user((void __user *)user_addr, vm_mmap,
 			 unconst + PAGE_SIZE)) {
 		pr_warn("copy_to_user failed, but lacked Oops\n");
 		goto free_user;
 	}
+	pr_err("FAIL: survived bad copy_to_user()\n");
 
 free_user:
 	vm_munmap(user_addr, PAGE_SIZE);
Signature · 1 line
2.25.1
author maintainer
#166 lore raw

PATCH 166/393 selftests/lkdtm: Reset WARN_ONCE to avoid false negatives

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit 4fccc8c0ff740e62343b6de38426a48b345b95f4 ]

Since we expect to see warnings every time for many tests, just reset the WARN_ONCE flags each time the script runs.

Fixes 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets")
---
 tools/testing/selftests/lkdtm/run.sh | 6 ++++++
 1 file changed, 6 insertions(+)
tools/testing/selftests/lkdtm/run.sh +6 -0
index ee64ff8df8f4d..8383eb89d88a9 100755
@@ -8,6 +8,7 @@
 #
 set -e
 TRIGGER=/sys/kernel/debug/provoke-crash/DIRECT
+CLEAR_ONCE=/sys/kernel/debug/clear_warn_once
 KSELFTEST_SKIP_TEST=4
 
 # Verify we have LKDTM available in the kernel.
@@ -67,6 +68,11 @@ cleanup() {
 }
 trap cleanup EXIT
 
+# Reset WARN_ONCE counters so we trip it each time this runs.
+if [ -w $CLEAR_ONCE ] ; then
+	echo 1 > $CLEAR_ONCE
+fi
+
 # Save existing dmesg so we can detect new content below
 dmesg > "$DMESG"
 
Signature · 1 line
2.25.1
author maintainer
#167 lore raw

PATCH 167/393 lkdtm: Make arch-specific tests always available

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit ae56942c14740c2963222efdc36c667ab19555ef ]

I'd like arch-specific tests to XFAIL when on a mismatched architecture so that we can more easily compare test coverage across all systems. Lacking kernel configs or CPU features count as a FAIL, not an XFAIL.

Additionally fixes a build failure under 32-bit UML.

Fixes b09511c253e5 ("lkdtm: Add a DOUBLE_FAULT crash type on x86")
Fixes cea23efb4de2 ("lkdtm/bugs: Make double-fault test always available")
Fixes 6cb6982f42cb ("lkdtm: arm64: test kernel pointer authentication")
---
 drivers/misc/lkdtm/bugs.c               | 38 ++++++++++++++-----------
 drivers/misc/lkdtm/lkdtm.h              |  2 --
 tools/testing/selftests/lkdtm/tests.txt |  1 +
 3 files changed, 22 insertions(+), 19 deletions(-)
drivers/misc/lkdtm/bugs.c +21 -17
index e1b43f6155496..7913c9ff216c9 100644
@@ -13,7 +13,7 @@
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 
-#ifdef CONFIG_X86_32
+#if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML)
 #include <asm/desc.h>
 #endif
 
@@ -418,7 +418,7 @@ void lkdtm_UNSET_SMEP(void)
 
 void lkdtm_DOUBLE_FAULT(void)
 {
-#ifdef CONFIG_X86_32
+#if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML)
 	/*
 	 * Trigger #DF by setting the stack limit to zero.  This clobbers
 	 * a GDT TLS slot, which is okay because the current task will die
@@ -453,38 +453,42 @@ void lkdtm_DOUBLE_FAULT(void)
 #endif
 }
 
-#ifdef CONFIG_ARM64_PTR_AUTH
+#ifdef CONFIG_ARM64
 static noinline void change_pac_parameters(void)
 {
-	/* Reset the keys of current task */
-	ptrauth_thread_init_kernel(current);
-	ptrauth_thread_switch_kernel(current);
+	if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH)) {
+		/* Reset the keys of current task */
+		ptrauth_thread_init_kernel(current);
+		ptrauth_thread_switch_kernel(current);
+	}
 }
+#endif
 
-#define CORRUPT_PAC_ITERATE	10
 noinline void lkdtm_CORRUPT_PAC(void)
 {
+#ifdef CONFIG_ARM64
+#define CORRUPT_PAC_ITERATE	10
 	int i;
 
+	if (!IS_ENABLED(CONFIG_ARM64_PTR_AUTH))
+		pr_err("FAIL: kernel not built with CONFIG_ARM64_PTR_AUTH\n");
+
 	if (!system_supports_address_auth()) {
-		pr_err("FAIL: arm64 pointer authentication feature not present\n");
+		pr_err("FAIL: CPU lacks pointer authentication feature\n");
 		return;
 	}
 
-	pr_info("Change the PAC parameters to force function return failure\n");
+	pr_info("changing PAC parameters to force function return failure...\n");
 	/*
-	 * Pac is a hash value computed from input keys, return address and
+	 * PAC is a hash value computed from input keys, return address and
 	 * stack pointer. As pac has fewer bits so there is a chance of
 	 * collision, so iterate few times to reduce the collision probability.
 	 */
 	for (i = 0; i < CORRUPT_PAC_ITERATE; i++)
 		change_pac_parameters();
 
-	pr_err("FAIL: %s test failed. Kernel may be unstable from here\n", __func__);
-}
-#else /* !CONFIG_ARM64_PTR_AUTH */
-noinline void lkdtm_CORRUPT_PAC(void)
-{
-	pr_err("FAIL: arm64 pointer authentication config disabled\n");
-}
+	pr_err("FAIL: survived PAC changes! Kernel may be unstable from here\n");
+#else
+	pr_err("XFAIL: this test is arm64-only\n");
 #endif
+}
drivers/misc/lkdtm/lkdtm.h +0 -2
index 601a2156a0d48..8878538b2c132 100644
@@ -31,9 +31,7 @@ void lkdtm_CORRUPT_USER_DS(void);
 void lkdtm_STACK_GUARD_PAGE_LEADING(void);
 void lkdtm_STACK_GUARD_PAGE_TRAILING(void);
 void lkdtm_UNSET_SMEP(void);
-#ifdef CONFIG_X86_32
 void lkdtm_DOUBLE_FAULT(void);
-#endif
 void lkdtm_CORRUPT_PAC(void);
 
 /* lkdtm_heap.c */
tools/testing/selftests/lkdtm/tests.txt +1 -0
index 92ca32143ae5f..9d266e79c6a27 100644
@@ -14,6 +14,7 @@ STACK_GUARD_PAGE_LEADING
 STACK_GUARD_PAGE_TRAILING
 UNSET_SMEP CR4 bits went missing
 DOUBLE_FAULT
+CORRUPT_PAC
 UNALIGNED_LOAD_STORE_WRITE
 #OVERWRITE_ALLOCATION Corrupts memory on failure
 #WRITE_AFTER_FREE Corrupts memory on failure
Signature · 1 line
2.25.1
author maintainer
#168 lore raw

PATCH 168/393 net: ethernet: ti: am65-cpsw-nuss: restore vlan configuration while down/up

In reply to Greg Kroah-Hartman

From: Grygorii Strashko <[email protected]>

[ Upstream commit 7bcffde02152dd3cb180f6f3aef27e8586b2a905 ]

The vlan configuration is not restored after interface down/up sequence.

Steps to check:

 # ip link add link eth0 name eth0.100 type vlan id 100
 # ifconfig eth0 down
 # ifconfig eth0 up

This patch fixes it, restoring vlan ALE entries on .ndo_open().

Fixes 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/net/ethernet/ti/am65-cpsw-nuss.c +19 -0
index 3e4388e6b5fa1..61b59a3b277ec 100644
@@ -217,6 +217,9 @@ static int am65_cpsw_nuss_ndo_slave_add_vid(struct net_device *ndev,
 	u32 port_mask, unreg_mcast = 0;
 	int ret;
 
+	if (!netif_running(ndev) || !vid)
+		return 0;
+
 	ret = pm_runtime_get_sync(common->dev);
 	if (ret < 0) {
 		pm_runtime_put_noidle(common->dev);
@@ -240,6 +243,9 @@ static int am65_cpsw_nuss_ndo_slave_kill_vid(struct net_device *ndev,
 	struct am65_cpsw_common *common = am65_ndev_to_common(ndev);
 	int ret;
 
+	if (!netif_running(ndev) || !vid)
+		return 0;
+
 	ret = pm_runtime_get_sync(common->dev);
 	if (ret < 0) {
 		pm_runtime_put_noidle(common->dev);
@@ -565,6 +571,16 @@ static int am65_cpsw_nuss_ndo_slave_stop(struct net_device *ndev)
 	return 0;
 }
 
+static int cpsw_restore_vlans(struct net_device *vdev, int vid, void *arg)
+{
+	struct am65_cpsw_port *port = arg;
+
+	if (!vdev)
+		return 0;
+
+	return am65_cpsw_nuss_ndo_slave_add_vid(port->ndev, 0, vid);
+}
+
 static int am65_cpsw_nuss_ndo_slave_open(struct net_device *ndev)
 {
 	struct am65_cpsw_common *common = am65_ndev_to_common(ndev);
@@ -638,6 +654,9 @@ static int am65_cpsw_nuss_ndo_slave_open(struct net_device *ndev)
 		}
 	}
 
+	/* restore vlan configurations */
+	vlan_for_each(ndev, cpsw_restore_vlans, port);
+
 	phy_attached_info(port->slave.phy);
 	phy_start(port->slave.phy);
 
Signature · 1 line
2.25.1
author maintainer
#169 lore raw

PATCH 169/393 tracing: Move pipe reference to trace array instead of current_tracer

In reply to Greg Kroah-Hartman

From: Steven Rostedt (VMware) <[email protected]>

[ Upstream commit 7ef282e05132d56b6f6b71e3873f317664bea78b ]

If a process has the trace_pipe open on a trace_array, the current tracer for that trace array should not be changed. This was original enforced by a global lock, but when instances were introduced, it was moved to the current_trace. But this structure is shared by all instances, and a trace_pipe is for a single instance. There's no reason that a process that has trace_pipe open on one instance should prevent another instance from changing its current tracer. Move the reference counter to the trace_array instead.

This is marked as "Fixes" but is more of a clean up than a true fix. Backport if you want, but its not critical.

Fixes cf6ab6d9143b1 ("tracing: Add ref count to tracer for when they are being read by pipe")
---
 kernel/trace/trace.c | 12 ++++++------
 kernel/trace/trace.h |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)
kernel/trace/trace.c +6 -6
index 29615f15a820b..5c56c1e2f2735 100644
@@ -5885,7 +5885,7 @@ int tracing_set_tracer(struct trace_array *tr, const char *buf)
 	}
 
 	/* If trace pipe files are being read, we can't change the tracer */
-	if (tr->current_trace->ref) {
+	if (tr->trace_ref) {
 		ret = -EBUSY;
 		goto out;
 	}
@@ -6101,7 +6101,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp)
 
 	nonseekable_open(inode, filp);
 
-	tr->current_trace->ref++;
+	tr->trace_ref++;
 out:
 	mutex_unlock(&trace_types_lock);
 	return ret;
@@ -6120,7 +6120,7 @@ static int tracing_release_pipe(struct inode *inode, struct file *file)
 
 	mutex_lock(&trace_types_lock);
 
-	tr->current_trace->ref--;
+	tr->trace_ref--;
 
 	if (iter->trace->pipe_close)
 		iter->trace->pipe_close(iter);
@@ -7429,7 +7429,7 @@ static int tracing_buffers_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = info;
 
-	tr->current_trace->ref++;
+	tr->trace_ref++;
 
 	mutex_unlock(&trace_types_lock);
 
@@ -7530,7 +7530,7 @@ static int tracing_buffers_release(struct inode *inode, struct file *file)
 
 	mutex_lock(&trace_types_lock);
 
-	iter->tr->current_trace->ref--;
+	iter->tr->trace_ref--;
 
 	__trace_array_put(iter->tr);
 
@@ -8752,7 +8752,7 @@ static int __remove_instance(struct trace_array *tr)
 	int i;
 
 	/* Reference counter for a newly created trace array = 1. */
-	if (tr->ref > 1 || (tr->current_trace && tr->current_trace->ref))
+	if (tr->ref > 1 || (tr->current_trace && tr->trace_ref))
 		return -EBUSY;
 
 	list_del(&tr->list);
kernel/trace/trace.h +1 -1
index 7fb2f4c1bc498..09298ce5f805b 100644
@@ -356,6 +356,7 @@ struct trace_array {
 	struct trace_event_file *trace_marker_file;
 	cpumask_var_t		tracing_cpumask; /* only trace on set CPUs */
 	int			ref;
+	int			trace_ref;
 #ifdef CONFIG_FUNCTION_TRACER
 	struct ftrace_ops	*ops;
 	struct trace_pid_list	__rcu *function_pids;
@@ -547,7 +548,6 @@ struct tracer {
 	struct tracer		*next;
 	struct tracer_flags	*flags;
 	int			enabled;
-	int			ref;
 	bool			print_max;
 	bool			allow_instances;
 #ifdef CONFIG_TRACER_MAX_TRACE
Signature · 1 line
2.25.1
author maintainer
#170 lore raw

PATCH 170/393 drm/amdgpu: ensure 0 is returned for success in jpeg_v2_5_wait_for_idle

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 57f01856645afe4c3d0f9915ee2bb043e8dd7982 ]

In the cases where adev->jpeg.num_jpeg_inst is zero or the condition adev->jpeg.harvest_config & (1 << i) is always non-zero the variable ret is never set to an error condition and the function returns an uninitialized value in ret. Since the only exit condition at the end if the function is a success then explicitly return 0 rather than a potentially uninitialized value in ret.

Addresses-Coverity: ("Uninitialized scalar variable")

Fixes 14f43e8f88c5 ("drm/amdgpu: move JPEG2.5 out from VCN2.5")
---
 drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c +1 -1
index c04c2078a7c1f..a7fcb55babb85 100644
@@ -462,7 +462,7 @@ static int jpeg_v2_5_wait_for_idle(void *handle)
 			return ret;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int jpeg_v2_5_set_clockgating_state(void *handle,
Signature · 1 line
2.25.1
author maintainer
#171 lore raw

PATCH 171/393 drm/radeon: fix array out-of-bounds read and write issues

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 7ee78aff9de13d5dccba133f4a0de5367194b243 ]

There is an off-by-one bounds check on the index into arrays table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that can lead to reads and writes outside of arrays. Fix the bound checking off-by-one error.

Addresses-Coverity: ("Out-of-bounds read/write")

Fixes cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
---
 drivers/gpu/drm/radeon/ci_dpm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/radeon/ci_dpm.c +1 -1
index 30b5a59353c52..ddc9c034ff9e0 100644
@@ -4365,7 +4365,7 @@ static int ci_set_mc_special_registers(struct radeon_device *rdev,
 					table->mc_reg_table_entry[k].mc_data[j] |= 0x100;
 			}
 			j++;
-			if (j > SMU7_DISCRETE_MC_REGISTER_ARRAY_SIZE)
+			if (j >= SMU7_DISCRETE_MC_REGISTER_ARRAY_SIZE)
 				return -EINVAL;
 
 			if (!pi->mem_gddr5) {
Signature · 1 line
2.25.1
author maintainer
#172 lore raw

PATCH 172/393 staging: vchiq_arm: Add a matching unregister call

In reply to Greg Kroah-Hartman

From: Phil Elwell <[email protected]>

[ Upstream commit 5d9272e28a9a6117fb63f5f930991304765caa32 ]

All the registered children of vchiq have a corresponding call to platform_device_unregister except bcm2835_audio. Fix that.

Fixes 25c7597af20d ("staging: vchiq_arm: Register a platform device for audio")
---
 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +1 -0
index a1ea9777a4445..73b1099c4b453 100644
@@ -2803,6 +2803,7 @@ static int vchiq_probe(struct platform_device *pdev)
 
 static int vchiq_remove(struct platform_device *pdev)
 {
+	platform_device_unregister(bcm2835_audio);
 	platform_device_unregister(bcm2835_camera);
 	vchiq_debugfs_deinit();
 	device_destroy(vchiq_class, vchiq_devid);
Signature · 1 line
2.25.1
author maintainer
#173 lore raw

PATCH 173/393 iavf: fix error return code in iavf_init_get_resources()

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

[ Upstream commit 753f3884f253de6b6d3a516e6651bda0baf4aede ]

Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function.

Fixes b66c7bc1cd4d ("iavf: Refactor init state machine")
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/iavf/iavf_main.c +3 -1
index a21ae74bcd1b6..8deff711cc02c 100644
@@ -1863,8 +1863,10 @@ static int iavf_init_get_resources(struct iavf_adapter *adapter)
 
 	adapter->rss_key = kzalloc(adapter->rss_key_size, GFP_KERNEL);
 	adapter->rss_lut = kzalloc(adapter->rss_lut_size, GFP_KERNEL);
-	if (!adapter->rss_key || !adapter->rss_lut)
+	if (!adapter->rss_key || !adapter->rss_lut) {
+		err = -ENOMEM;
 		goto err_mem;
+	}
 	if (RSS_AQ(adapter))
 		adapter->aq_required |= IAVF_FLAG_AQ_CONFIGURE_RSS;
 	else
Signature · 1 line
2.25.1
author maintainer
#174 lore raw

PATCH 174/393 iavf: Fix updating statistics

In reply to Greg Kroah-Hartman

From: Tony Nguyen <[email protected]>

[ Upstream commit 9358076642f14cec8c414850d5a909cafca3a9d6 ]

Commit bac8486116b0 ("iavf: Refactor the watchdog state machine") inverted the logic for when to update statistics. Statistics should be updated when no other commands are pending, instead they were only requested when a command was processed. iavf_request_stats() would see a pending request and not request statistics to be updated. This caused statistics to never be updated; fix the logic.

Fixes bac8486116b0 ("iavf: Refactor the watchdog state machine")
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/iavf/iavf_main.c +4 -1
index 8deff711cc02c..a4b2ad29e132a 100644
@@ -1948,7 +1948,10 @@ static void iavf_watchdog_task(struct work_struct *work)
 				iavf_send_api_ver(adapter);
 			}
 		} else {
-			if (!iavf_process_aq_command(adapter) &&
+			/* An error will be returned if no commands were
+			 * processed; use this opportunity to update stats
+			 */
+			if (iavf_process_aq_command(adapter) &&
 			    adapter->state == __IAVF_RUNNING)
 				iavf_request_stats(adapter);
 		}
Signature · 1 line
2.25.1
author maintainer
#175 lore raw

PATCH 175/393 RDMA/core: Fix bogus WARN_ON during ib_unregister_device_queued()

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 0cb42c0265837fafa2b4f302c8a7fed2631d7869 ]

ib_unregister_device_queued() can only be used by drivers using the new dealloc_device callback flow, and it has a safety WARN_ON to ensure drivers are using it properly.

However, if unregister and register are raced there is a special destruction path that maintains the uniform error handling semantic of 'caller does ib_dealloc_device() on failure'. This requires disabling the dealloc_device callback which triggers the WARN_ON.

Instead of using NULL to disable the callback use a special function pointer so the WARN_ON does not trigger.

Fixes d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
Reported-by [email protected]
---
 drivers/infiniband/core/device.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/infiniband/core/device.c +8 -3
index d0b3d35ad3e43..0fe3c3eb3dfd1 100644
@@ -1327,6 +1327,10 @@ static int enable_device_and_get(struct ib_device *device)
 	return ret;
 }
 
+static void prevent_dealloc_device(struct ib_device *ib_dev)
+{
+}
+
 /**
  * ib_register_device - Register an IB device with IB core
  * @device: Device to register
@@ -1396,11 +1400,11 @@ int ib_register_device(struct ib_device *device, const char *name)
 		 * possibility for a parallel unregistration along with this
 		 * error flow. Since we have a refcount here we know any
 		 * parallel flow is stopped in disable_device and will see the
-		 * NULL pointers, causing the responsibility to
+		 * special dealloc_driver pointer, causing the responsibility to
 		 * ib_dealloc_device() to revert back to this thread.
 		 */
 		dealloc_fn = device->ops.dealloc_driver;
-		device->ops.dealloc_driver = NULL;
+		device->ops.dealloc_driver = prevent_dealloc_device;
 		ib_device_put(device);
 		__ib_unregister_device(device);
 		device->ops.dealloc_driver = dealloc_fn;
@@ -1448,7 +1452,8 @@ static void __ib_unregister_device(struct ib_device *ib_dev)
 	 * Drivers using the new flow may not call ib_dealloc_device except
 	 * in error unwind prior to registration success.
 	 */
-	if (ib_dev->ops.dealloc_driver) {
+	if (ib_dev->ops.dealloc_driver &&
+	    ib_dev->ops.dealloc_driver != prevent_dealloc_device) {
 		WARN_ON(kref_read(&ib_dev->dev.kobj.kref) <= 1);
 		ib_dealloc_device(ib_dev);
 	}
Signature · 1 line
2.25.1
author maintainer
#176 lore raw

PATCH 176/393 scsi: powertec: Fix different dev_id between request_irq() and free_irq()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit d179f7c763241c1dc5077fca88ddc3c47d21b763 ]

The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases.

---
 drivers/scsi/arm/powertec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/arm/powertec.c +1 -1
index c795537a671cb..2dc0df005cb3b 100644
@@ -378,7 +378,7 @@ static int powertecscsi_probe(struct expansion_card *ec,
 
 	if (info->info.scsi.dma != NO_DMA)
 		free_dma(info->info.scsi.dma);
-	free_irq(ec->irq, host);
+	free_irq(ec->irq, info);
 
  out_release:
 	fas216_release(host);
Signature · 1 line
2.25.1
author maintainer
#177 lore raw

PATCH 177/393 scsi: eesox: Fix different dev_id between request_irq() and free_irq()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 86f2da1112ccf744ad9068b1d5d9843faf8ddee6 ]

The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases.

---
 drivers/scsi/arm/eesox.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/arm/eesox.c +1 -1
index 134f040d58e26..f441ec8eb93df 100644
@@ -571,7 +571,7 @@ static int eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	if (info->info.scsi.dma != NO_DMA)
 		free_dma(info->info.scsi.dma);
-	free_irq(ec->irq, host);
+	free_irq(ec->irq, info);
 
  out_remove:
 	fas216_remove(host);
Signature · 1 line
2.25.1
author maintainer
#178 lore raw

PATCH 178/393 ipvs: allow connection reuse for unconfirmed conntrack

In reply to Greg Kroah-Hartman

From: Julian Anastasov <[email protected]>

[ Upstream commit f0a5e4d7a594e0fe237d3dfafb069bb82f80f42f ]

YangYuxi is reporting that connection reuse is causing one-second delay when SYN hits existing connection in TIME_WAIT state. Such delay was added to give time to expire both the IPVS connection and the corresponding conntrack. This was considered a rare case at that time but it is causing problem for some environments such as Kubernetes.

As nf_conntrack_tcp_packet() can decide to release the conntrack in TIME_WAIT state and to replace it with a fresh NEW conntrack, we can use this to allow rescheduling just by tuning our check: if the conntrack is confirmed we can not schedule it to different real server and the one-second delay still applies but if new conntrack was created, we are free to select new real server without any delays.

YangYuxi lists some of the problem reports:

- One second connection delay in masquerading mode:
https://marc.info/?t=151683118100004&r=1&w=2

- IPVS low throughput #70747
https://github.com/kubernetes/kubernetes/issues/70747

- Apache Bench can fill up ipvs service proxy in seconds #544
https://github.com/cloudnativelabs/kube-router/issues/544

- Additional 1s latency in host -> service IP -> pod
https://github.com/kubernetes/kubernetes/issues/90854

Fixes f719e3754ee2 ("ipvs: drop first packet to redirect conntrack")
---
 include/net/ip_vs.h             | 10 ++++------
 net/netfilter/ipvs/ip_vs_core.c | 12 +++++++-----
 2 files changed, 11 insertions(+), 11 deletions(-)
include/net/ip_vs.h +4 -6
index 83be2d93b4076..fe96aa462d050 100644
@@ -1624,18 +1624,16 @@ static inline void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp)
 }
 #endif /* CONFIG_IP_VS_NFCT */
 
-/* Really using conntrack? */
-static inline bool ip_vs_conn_uses_conntrack(struct ip_vs_conn *cp,
-					     struct sk_buff *skb)
+/* Using old conntrack that can not be redirected to another real server? */
+static inline bool ip_vs_conn_uses_old_conntrack(struct ip_vs_conn *cp,
+						 struct sk_buff *skb)
 {
 #ifdef CONFIG_IP_VS_NFCT
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct;
 
-	if (!(cp->flags & IP_VS_CONN_F_NFCT))
-		return false;
 	ct = nf_ct_get(skb, &ctinfo);
-	if (ct)
+	if (ct && nf_ct_is_confirmed(ct))
 		return true;
 #endif
 	return false;
net/netfilter/ipvs/ip_vs_core.c +7 -5
index aa6a603a2425b..517f6a2ac15af 100644
@@ -2066,14 +2066,14 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
 
 	conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
 	if (conn_reuse_mode && !iph.fragoffs && is_new_conn(skb, &iph) && cp) {
-		bool uses_ct = false, resched = false;
+		bool old_ct = false, resched = false;
 
 		if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp->dest &&
 		    unlikely(!atomic_read(&cp->dest->weight))) {
 			resched = true;
-			uses_ct = ip_vs_conn_uses_conntrack(cp, skb);
+			old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
 		} else if (is_new_conn_expected(cp, conn_reuse_mode)) {
-			uses_ct = ip_vs_conn_uses_conntrack(cp, skb);
+			old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
 			if (!atomic_read(&cp->n_control)) {
 				resched = true;
 			} else {
@@ -2081,15 +2081,17 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
 				 * that uses conntrack while it is still
 				 * referenced by controlled connection(s).
 				 */
-				resched = !uses_ct;
+				resched = !old_ct;
 			}
 		}
 
 		if (resched) {
+			if (!old_ct)
+				cp->flags &= ~IP_VS_CONN_F_NFCT;
 			if (!atomic_read(&cp->n_control))
 				ip_vs_conn_expire_now(cp);
 			__ip_vs_conn_put(cp);
-			if (uses_ct)
+			if (old_ct)
 				return NF_DROP;
 			cp = NULL;
 		}
Signature · 1 line
2.25.1
author maintainer
#179 lore raw

PATCH 179/393 media: firewire: Using uninitialized values in node_probe()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 2505a210fc126599013aec2be741df20aaacc490 ]

If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So then the "strlen(model_names[i]) <= name_len" is true because strlen() is unsigned and -ENOENT is type promoted to a very high positive value. Then the "strncmp(name, model_names[i], name_len)" uses uninitialized data because "name" is uninitialized.

Fixes 92374e886c75 ("[media] firedtv: drop obsolete backend abstraction")
---
 drivers/media/firewire/firedtv-fw.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/media/firewire/firedtv-fw.c +2 -0
index 97144734eb052..3f1ca40b9b987 100644
@@ -272,6 +272,8 @@ static int node_probe(struct fw_unit *unit, const struct ieee1394_device_id *id)
 
 	name_len = fw_csr_string(unit->directory, CSR_MODEL,
 				 name, sizeof(name));
+	if (name_len < 0)
+		return name_len;
 	for (i = ARRAY_SIZE(model_names); --i; )
 		if (strlen(model_names[i]) <= name_len &&
 		    strncmp(name, model_names[i], name_len) == 0)
Signature · 1 line
2.25.1
author maintainer
#180 lore raw

PATCH 180/393 media: allegro: Fix some NULL vs IS_ERR() checks in probe

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit d93d45ab716e4107056be54969c8c70e50a8346d ]

The devm_ioremap() function doesn't return error pointers, it returns NULL on error.

Fixes f20387dfd065 ("media: allegro: add Allegro DVT video IP core driver")
---
 drivers/staging/media/allegro-dvt/allegro-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/media/allegro-dvt/allegro-core.c +4 -4
index 70f133a842ddf..3ed66aae741d5 100644
@@ -3065,9 +3065,9 @@ static int allegro_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 	regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (IS_ERR(regs)) {
+	if (!regs) {
 		dev_err(&pdev->dev, "failed to map registers\n");
-		return PTR_ERR(regs);
+		return -ENOMEM;
 	}
 	dev->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
 					    &allegro_regmap_config);
@@ -3085,9 +3085,9 @@ static int allegro_probe(struct platform_device *pdev)
 	sram_regs = devm_ioremap(&pdev->dev,
 				 sram_res->start,
 				 resource_size(sram_res));
-	if (IS_ERR(sram_regs)) {
+	if (!sram_regs) {
 		dev_err(&pdev->dev, "failed to map sram\n");
-		return PTR_ERR(sram_regs);
+		return -ENOMEM;
 	}
 	dev->sram = devm_regmap_init_mmio(&pdev->dev, sram_regs,
 					  &allegro_sram_config);
Signature · 1 line
2.25.1
author maintainer
#181 lore raw

PATCH 181/393 media: staging: rkisp1: rsz: supported formats are the isps src formats, not sink formats

In reply to Greg Kroah-Hartman

From: Dafna Hirschfeld <[email protected]>

[ Upstream commit 7b8ce1f2763b9351a4cb04b802835470e76770a5 ]

The rkisp1_resizer's enum callback 'rkisp1_rsz_enum_mbus_code' calls the enum callback of the 'rkisp1_isp' on it's video sink pad. This is a bug, the resizer should support the same formats supported by the 'rkisp1_isp' on the source pad (not the sink pad).

Fixes 56e3b29f9f6b "media: staging: rkisp1: add streaming paths"
---
 drivers/staging/media/rkisp1/rkisp1-resizer.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/media/rkisp1/rkisp1-resizer.c +2 -2
index 87799fbf0363e..8b1c0cc5ea3f1 100644
@@ -427,8 +427,8 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
 	u32 pad = code->pad;
 	int ret;
 
-	/* supported mbus codes are the same in isp sink pad */
-	code->pad = RKISP1_ISP_PAD_SINK_VIDEO;
+	/* supported mbus codes are the same in isp video src pad */
+	code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO;
 	ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code,
 			       &dummy_cfg, code);
 
Signature · 1 line
2.25.1
author maintainer
#182 lore raw

PATCH 182/393 media: staging: rkisp1: rsz: fix resolution limitation on sink pad

In reply to Greg Kroah-Hartman

From: Helen Koike <[email protected]>

[ Upstream commit 906dceb48dfa1e7c99c32e6b25878d47023e916b ]

Resizer sink pad is limited by what the ISP can generate. The configurations describes what the resizer can produce.

This was tested on a Scarlet device with ChromiumOs, where the selfpath receives 2592x1944 and produces 1600x1200 (which isn't possible without this fix).

Fixes 56e3b29f9f6b2 ("media: staging: rkisp1: add streaming paths")
---
 drivers/staging/media/rkisp1/rkisp1-resizer.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/media/rkisp1/rkisp1-resizer.c +4 -4
index 8b1c0cc5ea3f1..26d785d985257 100644
@@ -543,11 +543,11 @@ static void rkisp1_rsz_set_sink_fmt(struct rkisp1_resizer *rsz,
 	src_fmt->code = sink_fmt->code;
 
 	sink_fmt->width = clamp_t(u32, format->width,
-				  rsz->config->min_rsz_width,
-				  rsz->config->max_rsz_width);
+				  RKISP1_ISP_MIN_WIDTH,
+				  RKISP1_ISP_MAX_WIDTH);
 	sink_fmt->height = clamp_t(u32, format->height,
-				   rsz->config->min_rsz_height,
-				   rsz->config->max_rsz_height);
+				  RKISP1_ISP_MIN_HEIGHT,
+				  RKISP1_ISP_MAX_HEIGHT);
 
 	*format = *sink_fmt;
 
Signature · 1 line
2.25.1
author maintainer
#183 lore raw

PATCH 183/393 media: tvp5150: Add missed media_entity_cleanup()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit d000e9b5e4a23dd700b3f58a4738c94bb5179ff0 ]

This driver does not call media_entity_cleanup() in the error handler of tvp5150_registered() and tvp5150_remove(), while it has called media_entity_pads_init() at first.
Add the missed calls to fix it.

Fixes 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support")
---
 drivers/media/i2c/tvp5150.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/media/i2c/tvp5150.c +6 -2
index eb39cf5ea0895..9df575238952a 100644
@@ -1664,8 +1664,10 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
 	return 0;
 
 err:
-	for (i = 0; i < decoder->connectors_num; i++)
+	for (i = 0; i < decoder->connectors_num; i++) {
 		media_device_unregister_entity(&decoder->connectors[i].ent);
+		media_entity_cleanup(&decoder->connectors[i].ent);
+	}
 	return ret;
 #endif
 
@@ -2248,8 +2250,10 @@ static int tvp5150_remove(struct i2c_client *c)
 
 	for (i = 0; i < decoder->connectors_num; i++)
 		v4l2_fwnode_connector_free(&decoder->connectors[i].base);
-	for (i = 0; i < decoder->connectors_num; i++)
+	for (i = 0; i < decoder->connectors_num; i++) {
 		media_device_unregister_entity(&decoder->connectors[i].ent);
+		media_entity_cleanup(&decoder->connectors[i].ent);
+	}
 	v4l2_async_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&decoder->hdl);
 	pm_runtime_disable(&c->dev);
Signature · 1 line
2.25.1
author maintainer
#184 lore raw

PATCH 184/393 media: exynos4-is: Add missed check for pinctrl_lookup_state()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit 18ffec750578f7447c288647d7282c7d12b1d969 ]

fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it.

Fixes 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]")
---
 drivers/media/platform/exynos4-is/media-dev.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/media/platform/exynos4-is/media-dev.c +3 -0
index 9aaf3b8060d50..9c31d950cddf7 100644
@@ -1270,6 +1270,9 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
 
 	pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl,
 					PINCTRL_STATE_IDLE);
+	if (IS_ERR(pctl->state_idle))
+		return PTR_ERR(pctl->state_idle);
+
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#185 lore raw

PATCH 185/393 media: cros-ec-cec: do not bail on device_init_wakeup failure

In reply to Greg Kroah-Hartman

From: Dariusz Marcinkiewicz <[email protected]>

[ Upstream commit 6f01dfb760c027d5dd6199d91ee9599f2676b5c6 ]

Do not fail probing when device_init_wakeup fails.

device_init_wakeup fails when the device is already enabled as wakeup device. Hence, the driver fails to probe the device if:
- The device has already been enabled for wakeup (by e.g. sysfs)
- The driver has been unloaded and is being loaded again.

This goal of the patch is to fix the above cases.

Overwhelming majority of the drivers do not check device_init_wakeup return code.

Fixes cd70de2d356ee ("media: platform: Add ChromeOS EC CEC driver")
---
 drivers/media/platform/cros-ec-cec/cros-ec-cec.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/media/platform/cros-ec-cec/cros-ec-cec.c +1 -5
index 0e7e2772f08f9..2d95e16cd2489 100644
@@ -277,11 +277,7 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, cros_ec_cec);
 	cros_ec_cec->cros_ec = cros_ec;
 
-	ret = device_init_wakeup(&pdev->dev, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize wakeup\n");
-		return ret;
-	}
+	device_init_wakeup(&pdev->dev, 1);
 
 	cros_ec_cec->adap = cec_allocate_adapter(&cros_ec_cec_ops, cros_ec_cec,
 						 DRV_NAME,
Signature · 1 line
2.25.1
author maintainer
#186 lore raw

PATCH 186/393 xfs: dont eat an EIO/ENOSPC writeback error when scrubbing data fork

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit eb0efe5063bb10bcb653e4f8e92a74719c03a347 ]

The data fork scrubber calls filemap_write_and_wait to flush dirty pages and delalloc reservations out to disk prior to checking the data fork's extent mappings. Unfortunately, this means that scrub can consume the EIO/ENOSPC errors that would otherwise have stayed around in the address space until (we hope) the writer application calls fsync to persist data and collect errors. The end result is that programs that wrote to a file might never see the error code and proceed as if nothing were wrong.

xfs_scrub is not in a position to notify file writers about the writeback failure, and it's only here to check metadata, not file contents. Therefore, if writeback fails, we should stuff the error code back into the address space so that an fsync by the writer application can pick that up.

Fixes 99d9d8d05da2 ("xfs: scrub inode block mappings")
---
 fs/xfs/scrub/bmap.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)
fs/xfs/scrub/bmap.c +20 -2
index add8598eacd5d..c4788d244de35 100644
@@ -45,9 +45,27 @@ xchk_setup_inode_bmap(
 	 */
 	if (S_ISREG(VFS_I(sc->ip)->i_mode) &&
 	    sc->sm->sm_type == XFS_SCRUB_TYPE_BMBTD) {
+		struct address_space	*mapping = VFS_I(sc->ip)->i_mapping;
+
 		inode_dio_wait(VFS_I(sc->ip));
-		error = filemap_write_and_wait(VFS_I(sc->ip)->i_mapping);
-		if (error)
+
+		/*
+		 * Try to flush all incore state to disk before we examine the
+		 * space mappings for the data fork.  Leave accumulated errors
+		 * in the mapping for the writer threads to consume.
+		 *
+		 * On ENOSPC or EIO writeback errors, we continue into the
+		 * extent mapping checks because write failures do not
+		 * necessarily imply anything about the correctness of the file
+		 * metadata.  The metadata and the file data could be on
+		 * completely separate devices; a media failure might only
+		 * affect a subset of the disk, etc.  We can handle delalloc
+		 * extents in the scrubber, so leaving them in memory is fine.
+		 */
+		error = filemap_fdatawrite(mapping);
+		if (!error)
+			error = filemap_fdatawait_keep_errors(mapping);
+		if (error && (error != -ENOSPC && error != -EIO))
 			goto out;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#187 lore raw

PATCH 187/393 xfs: fix reflink quota reservation accounting error

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 83895227aba1ade33e81f586aa7b6b1e143096a5 ]

Quota reservations are supposed to account for the blocks that might be allocated due to a bmap btree split. Reflink doesn't do this, so fix this to make the quota accounting more accurate before we start rearranging things.

Fixes 862bb360ef56 ("xfs: reflink extents from one file to another")
---
 fs/xfs/xfs_reflink.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
fs/xfs/xfs_reflink.c +14 -7
index 107bf2a2f3448..d89201d40891f 100644
@@ -1003,6 +1003,7 @@ xfs_reflink_remap_extent(
 	xfs_filblks_t		rlen;
 	xfs_filblks_t		unmap_len;
 	xfs_off_t		newlen;
+	int64_t			qres;
 	int			error;
 
 	unmap_len = irec->br_startoff + irec->br_blockcount - destoff;
@@ -1025,13 +1026,19 @@ xfs_reflink_remap_extent(
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 	xfs_trans_ijoin(tp, ip, 0);
 
-	/* If we're not just clearing space, then do we have enough quota? */
-	if (real_extent) {
-		error = xfs_trans_reserve_quota_nblks(tp, ip,
-				irec->br_blockcount, 0, XFS_QMOPT_RES_REGBLKS);
-		if (error)
-			goto out_cancel;
-	}
+	/*
+	 * Reserve quota for this operation.  We don't know if the first unmap
+	 * in the dest file will cause a bmap btree split, so we always reserve
+	 * at least enough blocks for that split.  If the extent being mapped
+	 * in is written, we need to reserve quota for that too.
+	 */
+	qres = XFS_EXTENTADD_SPACE_RES(mp, XFS_DATA_FORK);
+	if (real_extent)
+		qres += irec->br_blockcount;
+	error = xfs_trans_reserve_quota_nblks(tp, ip, qres, 0,
+			XFS_QMOPT_RES_REGBLKS);
+	if (error)
+		goto out_cancel;
 
 	trace_xfs_reflink_remap(ip, irec->br_startoff,
 				irec->br_blockcount, irec->br_startblock);
Signature · 1 line
2.25.1
author maintainer
#188 lore raw

PATCH 188/393 iomap: Make sure iomap_end is called after iomap_begin

In reply to Greg Kroah-Hartman

From: Andreas Gruenbacher <[email protected]>

[ Upstream commit 856473cd5d17dbbf3055710857c67a4af6d9fcc0 ]

Make sure iomap_end is always called when iomap_begin succeeds.

Without this fix, iomap_end won't be called when a filesystem's iomap_begin operation returns an invalid mapping, bypassing any unlocking done in iomap_end. With this fix, the unlocking will still happen.

This bug was found by Bob Peterson during code review. It's unlikely that such iomap_begin bugs will survive to affect users, so backporting this fix seems unnecessary.

Fixes ae259a9c8593 ("fs: introduce iomap infrastructure")
---
 fs/iomap/apply.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
fs/iomap/apply.c +9 -4
index 76925b40b5fd2..26ab6563181fc 100644
@@ -46,10 +46,14 @@ iomap_apply(struct inode *inode, loff_t pos, loff_t length, unsigned flags,
 	ret = ops->iomap_begin(inode, pos, length, flags, &iomap, &srcmap);
 	if (ret)
 		return ret;
-	if (WARN_ON(iomap.offset > pos))
-		return -EIO;
-	if (WARN_ON(iomap.length == 0))
-		return -EIO;
+	if (WARN_ON(iomap.offset > pos)) {
+		written = -EIO;
+		goto out;
+	}
+	if (WARN_ON(iomap.length == 0)) {
+		written = -EIO;
+		goto out;
+	}
 
 	trace_iomap_apply_dstmap(inode, &iomap);
 	if (srcmap.type != IOMAP_HOLE)
@@ -80,6 +84,7 @@ iomap_apply(struct inode *inode, loff_t pos, loff_t length, unsigned flags,
 	written = actor(inode, pos, length, data, &iomap,
 			srcmap.type != IOMAP_HOLE ? &srcmap : &iomap);
 
+out:
 	/*
 	 * Now the data has been copied, commit the range we've copied.  This
 	 * should not fail unless the filesystem has had a fatal error.
Signature · 1 line
2.25.1
#189 lore raw

Re: [PATCH 5.7 188/393] iomap: Make sure iomap_end is called after iomap_begin

Greg,

Am Mo., 17. Aug. 2020 um 21:01 Uhr schrieb Greg Kroah-Hartman <[email protected]>:

Quoted 6 lines

From: Andreas Gruenbacher <[email protected]>

[ Upstream commit 856473cd5d17dbbf3055710857c67a4af6d9fcc0 ]

Make sure iomap_end is always called when iomap_begin succeeds.

Quoted 8 lines

Without this fix, iomap_end won't be called when a filesystem's iomap_begin operation returns an invalid mapping, bypassing any unlocking done in iomap_end. With this fix, the unlocking will still happen.

This bug was found by Bob Peterson during code review. It's unlikely that such iomap_begin bugs will survive to affect users, so backporting this fix seems unnecessary.

this doesn't need to be backported.

Thanks,
Andreas

Quoted 46 lines
Fixes ae259a9c8593 ("fs: introduce iomap infrastructure")
---
 fs/iomap/apply.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
fs/iomap/apply.c +9 -5
index 76925b40b5fd2..26ab6563181fc 100644
@@ -46,10 +46,14 @@ iomap_apply(struct inode *inode, loff_t pos, loff_t length, unsigned flags,
        ret = ops->iomap_begin(inode, pos, length, flags, &iomap, &srcmap);
        if (ret)
                return ret;
-       if (WARN_ON(iomap.offset > pos))
-               return -EIO;
-       if (WARN_ON(iomap.length == 0))
-               return -EIO;
+       if (WARN_ON(iomap.offset > pos)) {
+               written = -EIO;
+               goto out;
+       }
+       if (WARN_ON(iomap.length == 0)) {
+               written = -EIO;
+               goto out;
+       }
 
        trace_iomap_apply_dstmap(inode, &iomap);
        if (srcmap.type != IOMAP_HOLE)
@@ -80,6 +84,7 @@ iomap_apply(struct inode *inode, loff_t pos, loff_t length, unsigned flags,
        written = actor(inode, pos, length, data, &iomap,
                        srcmap.type != IOMAP_HOLE ? &srcmap : &iomap);
 
+out:
        /*
         * Now the data has been copied, commit the range we've copied.  This
         * should not fail unless the filesystem has had a fatal error.
--

2.25.1

author maintainer
#190 lore raw

PATCH 189/393 RDMA/rxe: Skip dgid check in loopback mode

In reply to Greg Kroah-Hartman

From: Zhu Yanjun <[email protected]>

[ Upstream commit 5c99274be8864519328aa74bc550ba410095bc1c ]

In the loopback tests, the following call trace occurs.

 Call Trace:
  __rxe_do_task+0x1a/0x30 [rdma_rxe]
  rxe_qp_destroy+0x61/0xa0 [rdma_rxe]
  rxe_destroy_qp+0x20/0x60 [rdma_rxe]
  ib_destroy_qp_user+0xcc/0x220 [ib_core]
  uverbs_free_qp+0x3c/0xc0 [ib_uverbs]
  destroy_hw_idr_uobject+0x24/0x70 [ib_uverbs]
  uverbs_destroy_uobject+0x43/0x1b0 [ib_uverbs]
  uobj_destroy+0x41/0x70 [ib_uverbs]
  __uobj_get_destroy+0x39/0x70 [ib_uverbs]
  ib_uverbs_destroy_qp+0x88/0xc0 [ib_uverbs]
  ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb9/0xf0 [ib_uverbs]
  ib_uverbs_cmd_verbs+0xb16/0xc30 [ib_uverbs]

The root cause is that the actual RDMA connection is not created in the loopback tests and the rxe_match_dgid will fail randomly.

To fix this call trace which appear in the loopback tests, skip check of the dgid.

---
 drivers/infiniband/sw/rxe/rxe_recv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/infiniband/sw/rxe/rxe_recv.c +5 -1
index 831ad578a7b29..46e111c218fd4 100644
@@ -330,10 +330,14 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
 
 static int rxe_match_dgid(struct rxe_dev *rxe, struct sk_buff *skb)
 {
+	struct rxe_pkt_info *pkt = SKB_TO_PKT(skb);
 	const struct ib_gid_attr *gid_attr;
 	union ib_gid dgid;
 	union ib_gid *pdgid;
 
+	if (pkt->mask & RXE_LOOPBACK_MASK)
+		return 0;
+
 	if (skb->protocol == htons(ETH_P_IP)) {
 		ipv6_addr_set_v4mapped(ip_hdr(skb)->daddr,
 				       (struct in6_addr *)&dgid);
@@ -366,7 +370,7 @@ void rxe_rcv(struct sk_buff *skb)
 	if (unlikely(skb->len < pkt->offset + RXE_BTH_BYTES))
 		goto drop;
 
-	if (unlikely(rxe_match_dgid(rxe, skb) < 0)) {
+	if (rxe_match_dgid(rxe, skb) < 0) {
 		pr_warn_ratelimited("failed matching dgid\n");
 		goto drop;
 	}
Signature · 1 line
2.25.1
author maintainer
#191 lore raw

PATCH 190/393 PCI: Fix pci_cfg_wait queue locking problem

In reply to Greg Kroah-Hartman

From: Bjorn Helgaas <[email protected]>

[ Upstream commit 2a7e32d0547f41c5ce244f84cf5d6ca7fccee7eb ]

The pci_cfg_wait queue is used to prevent user-space config accesses to devices while they are recovering from reset.

Previously we used these operations on pci_cfg_wait:

__add_wait_queue(&pci_cfg_wait, ...)
__remove_wait_queue(&pci_cfg_wait, ...)
wake_up_all(&pci_cfg_wait)

The wake_up acquires the wait queue lock, but the add and remove do not.

Originally these were all protected by the pci_lock, but cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved wake_up_all() outside pci_lock, so it could race with add/remove operations, which caused occasional kernel panics, e.g., during vfio-pci hotplug/unplug testing:

  Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000

Resolve this by using wait_event() instead of __add_wait_queue() and __remove_wait_queue(). The wait queue lock is held by both wait_event() and wake_up_all(), so it provides mutual exclusion.

Fixes cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock")

Based-on: https://lore.kernel.org/linux-pci/[email protected]/

---
 drivers/pci/access.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/pci/access.c +2 -6
index 79c4a2ef269a7..9793f17fa1843 100644
@@ -204,17 +204,13 @@ EXPORT_SYMBOL(pci_bus_set_ops);
 static DECLARE_WAIT_QUEUE_HEAD(pci_cfg_wait);
 
 static noinline void pci_wait_cfg(struct pci_dev *dev)
+	__must_hold(&pci_lock)
 {
-	DECLARE_WAITQUEUE(wait, current);
-
-	__add_wait_queue(&pci_cfg_wait, &wait);
 	do {
-		set_current_state(TASK_UNINTERRUPTIBLE);
 		raw_spin_unlock_irq(&pci_lock);
-		schedule();
+		wait_event(pci_cfg_wait, !dev->block_cfg_access);
 		raw_spin_lock_irq(&pci_lock);
 	} while (dev->block_cfg_access);
-	__remove_wait_queue(&pci_cfg_wait, &wait);
 }
 
 /* Returns 0 on success, negative values indicate error. */
Signature · 1 line
2.25.1
author maintainer
#192 lore raw

PATCH 191/393 samples: bpf: Fix bpf programs with kprobe/sys_connect event

In reply to Greg Kroah-Hartman

From: Daniel T. Lee <[email protected]>

[ Upstream commit af9bd3e3331b8af42b6606c75797d041ab39380c ]

Currently, BPF programs with kprobe/sys_connect does not work properly.

Commit 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") This commit modifies the bpf_load behavior of kprobe events in the x64 architecture. If the current kprobe event target starts with "sys_*", add the prefix "__x64_" to the front of the event.

Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a solution to most of the problems caused by the commit below.

commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")

However, there is a problem with the sys_connect kprobe event that does not work properly. For __sys_connect event, parameters can be fetched normally, but for __x64_sys_connect, parameters cannot be fetched.

    ffffffff818d3520 <__x64_sys_connect>:
    ffffffff818d3520: e8 fb df 32 00        callq   0xffffffff81c01520
    <__fentry__>
    ffffffff818d3525: 48 8b 57 60           movq    96(%rdi), %rdx
    ffffffff818d3529: 48 8b 77 68           movq    104(%rdi), %rsi
    ffffffff818d352d: 48 8b 7f 70           movq    112(%rdi), %rdi
    ffffffff818d3531: e8 1a ff ff ff        callq   0xffffffff818d3450
    <__sys_connect>
    ffffffff818d3536: 48 98                 cltq
    ffffffff818d3538: c3                    retq
    ffffffff818d3539: 0f 1f 80 00 00 00 00  nopl    (%rax)

As the assembly code for __x64_sys_connect shows, parameters should be fetched and set into rdi, rsi, rdx registers prior to calling __sys_connect.

Because of this problem, this commit fixes the sys_connect event by first getting the value of the rdi register and then the value of the rdi, rsi, and rdx register through an offset based on that value.

---
 samples/bpf/map_perf_test_kern.c         | 9 ++++++---
 samples/bpf/test_map_in_map_kern.c       | 9 ++++++---
 samples/bpf/test_probe_write_user_kern.c | 9 ++++++---
 3 files changed, 18 insertions(+), 9 deletions(-)
samples/bpf/map_perf_test_kern.c +6 -3
index 12e91ae64d4d9..c9b31193ca128 100644
@@ -11,6 +11,8 @@
 #include <bpf/bpf_helpers.h>
 #include "bpf_legacy.h"
 #include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include "trace_common.h"
 
 #define MAX_ENTRIES 1000
 #define MAX_NR_CPUS 1024
@@ -154,9 +156,10 @@ int stress_percpu_hmap_alloc(struct pt_regs *ctx)
 	return 0;
 }
 
-SEC("kprobe/sys_connect")
+SEC("kprobe/" SYSCALL(sys_connect))
 int stress_lru_hmap_alloc(struct pt_regs *ctx)
 {
+	struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
 	char fmt[] = "Failed at stress_lru_hmap_alloc. ret:%dn";
 	union {
 		u16 dst6[8];
@@ -175,8 +178,8 @@ int stress_lru_hmap_alloc(struct pt_regs *ctx)
 	long val = 1;
 	u32 key = 0;
 
-	in6 = (struct sockaddr_in6 *)PT_REGS_PARM2(ctx);
-	addrlen = (int)PT_REGS_PARM3(ctx);
+	in6 = (struct sockaddr_in6 *)PT_REGS_PARM2_CORE(real_regs);
+	addrlen = (int)PT_REGS_PARM3_CORE(real_regs);
 
 	if (addrlen != sizeof(*in6))
 		return 0;
samples/bpf/test_map_in_map_kern.c +6 -3
index 6cee61e8ce9b6..36a203e690645 100644
@@ -13,6 +13,8 @@
 #include <bpf/bpf_helpers.h>
 #include "bpf_legacy.h"
 #include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include "trace_common.h"
 
 #define MAX_NR_PORTS 65536
 
@@ -102,9 +104,10 @@ static __always_inline int do_inline_hash_lookup(void *inner_map, u32 port)
 	return result ? *result : -ENOENT;
 }
 
-SEC("kprobe/sys_connect")
+SEC("kprobe/" SYSCALL(sys_connect))
 int trace_sys_connect(struct pt_regs *ctx)
 {
+	struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
 	struct sockaddr_in6 *in6;
 	u16 test_case, port, dst6[8];
 	int addrlen, ret, inline_ret, ret_key = 0;
@@ -112,8 +115,8 @@ int trace_sys_connect(struct pt_regs *ctx)
 	void *outer_map, *inner_map;
 	bool inline_hash = false;
 
-	in6 = (struct sockaddr_in6 *)PT_REGS_PARM2(ctx);
-	addrlen = (int)PT_REGS_PARM3(ctx);
+	in6 = (struct sockaddr_in6 *)PT_REGS_PARM2_CORE(real_regs);
+	addrlen = (int)PT_REGS_PARM3_CORE(real_regs);
 
 	if (addrlen != sizeof(*in6))
 		return 0;
samples/bpf/test_probe_write_user_kern.c +6 -3
index f033f36a13a38..fd651a65281eb 100644
@@ -10,6 +10,8 @@
 #include <linux/version.h>
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include "trace_common.h"
 
 struct bpf_map_def SEC("maps") dnat_map = {
 	.type = BPF_MAP_TYPE_HASH,
@@ -26,13 +28,14 @@ struct bpf_map_def SEC("maps") dnat_map = {
  * This example sits on a syscall, and the syscall ABI is relatively stable
  * of course, across platforms, and over time, the ABI may change.
  */
-SEC("kprobe/sys_connect")
+SEC("kprobe/" SYSCALL(sys_connect))
 int bpf_prog1(struct pt_regs *ctx)
 {
+	struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
+	void *sockaddr_arg = (void *)PT_REGS_PARM2_CORE(real_regs);
+	int sockaddr_len = (int)PT_REGS_PARM3_CORE(real_regs);
 	struct sockaddr_in new_addr, orig_addr = {};
 	struct sockaddr_in *mapped_addr;
-	void *sockaddr_arg = (void *)PT_REGS_PARM2(ctx);
-	int sockaddr_len = (int)PT_REGS_PARM3(ctx);
 
 	if (sockaddr_len > sizeof(orig_addr))
 		return 0;
Signature · 1 line
2.25.1
author maintainer
#193 lore raw

PATCH 192/393 drm/stm: repair runtime power management

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

[ Upstream commit ebd267b2e3c25d5f93a08528b47c036569eb8744 ]

Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise the LTDC might suspend via runtime PM, disable clock, and then fail to resume later on.

The test which triggers it is roughly -- run qt5 application which uses eglfs platform and etnaviv, stop the application, sleep for 15 minutes, run the application again. This leads to a timeout waiting for vsync, because the LTDC has suspended, but did not resume.

Fixes 35ab6cfbf211 ("drm/stm: support runtime power management")
Cc Yannick Fertré <[email protected]>
Cc Philippe Cornu <[email protected]>
Cc Benjamin Gaignard <[email protected]>
Cc Vincent Abriou <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>

To: [email protected]

---
 drivers/gpu/drm/stm/ltdc.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/stm/ltdc.c +3 -0
index df585fe64f614..60ffe5bbc1294 100644
@@ -425,9 +425,12 @@ static void ltdc_crtc_atomic_enable(struct drm_crtc *crtc,
 				    struct drm_crtc_state *old_state)
 {
 	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
+	struct drm_device *ddev = crtc->dev;
 
 	DRM_DEBUG_DRIVER("\n");
 
+	pm_runtime_get_sync(ddev->dev);
+
 	/* Sets the background color value */
 	reg_write(ldev->regs, LTDC_BCCR, BCCR_BCBLACK);
 
Signature · 8 lines
2.25.1



_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#194 lore raw

PATCH 193/393 kobject: Avoid premature parent object freeing in kobject_cleanup()

In reply to Greg Kroah-Hartman

From: Heikki Krogerus <[email protected]>

[ Upstream commit 079ad2fb4bf9eba8a0aaab014b49705cd7f07c66 ]

If kobject_del() is invoked by kobject_cleanup() to delete the target kobject, it may cause its parent kobject to be freed before invoking the target kobject's ->release() method, which effectively means freeing the parent before dealing with the child entirely.

That is confusing at best and it may also lead to functional issues if the callers of kobject_cleanup() are not careful enough about the order in which these calls are made, so avoid the problem by making kobject_cleanup() drop the last reference to the target kobject's parent at the end, after invoking the target kobject's ->release() method.

[ rjw: Rewrite the subject and changelog, make kobject_cleanup()
drop the parent reference only when __kobject_del() has been called. ]

---
 lib/kobject.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
lib/kobject.c +23 -10
index 83198cb37d8d9..386873bdd51c9 100644
@@ -599,14 +599,7 @@ int kobject_move(struct kobject *kobj, struct kobject *new_parent)
 }
 EXPORT_SYMBOL_GPL(kobject_move);
 
-/**
- * kobject_del() - Unlink kobject from hierarchy.
- * @kobj: object.
- *
- * This is the function that should be called to delete an object
- * successfully added via kobject_add().
- */
-void kobject_del(struct kobject *kobj)
+static void __kobject_del(struct kobject *kobj)
 {
 	struct kernfs_node *sd;
 	const struct kobj_type *ktype;
@@ -625,9 +618,23 @@ void kobject_del(struct kobject *kobj)
 
 	kobj->state_in_sysfs = 0;
 	kobj_kset_leave(kobj);
-	kobject_put(kobj->parent);
 	kobj->parent = NULL;
 }
+
+/**
+ * kobject_del() - Unlink kobject from hierarchy.
+ * @kobj: object.
+ *
+ * This is the function that should be called to delete an object
+ * successfully added via kobject_add().
+ */
+void kobject_del(struct kobject *kobj)
+{
+	struct kobject *parent = kobj->parent;
+
+	__kobject_del(kobj);
+	kobject_put(parent);
+}
 EXPORT_SYMBOL(kobject_del);
 
 /**
@@ -663,6 +670,7 @@ EXPORT_SYMBOL(kobject_get_unless_zero);
  */
 static void kobject_cleanup(struct kobject *kobj)
 {
+	struct kobject *parent = kobj->parent;
 	struct kobj_type *t = get_ktype(kobj);
 	const char *name = kobj->name;
 
@@ -684,7 +692,10 @@ static void kobject_cleanup(struct kobject *kobj)
 	if (kobj->state_in_sysfs) {
 		pr_debug("kobject: '%s' (%p): auto cleanup kobject_del\n",
 			 kobject_name(kobj), kobj);
-		kobject_del(kobj);
+		__kobject_del(kobj);
+	} else {
+		/* avoid dropping the parent reference unnecessarily */
+		parent = NULL;
 	}
 
 	if (t && t->release) {
@@ -698,6 +709,8 @@ static void kobject_cleanup(struct kobject *kobj)
 		pr_debug("kobject: '%s': free name\n", name);
 		kfree_const(name);
 	}
+
+	kobject_put(parent);
 }
 
 #ifdef CONFIG_DEBUG_KOBJECT_RELEASE
Signature · 1 line
2.25.1
author maintainer
#195 lore raw

PATCH 194/393 leds: core: Flush scheduled work for system suspend

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 302a085c20194bfa7df52e0fe684ee0c41da02e6 ]

Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon system suspend.

led_set_brightness_nopm() uses schedule_work() to set LED brightness. However, there's no guarantee that the scheduled work gets executed because no one flushes the work.

So flush the scheduled work to make sure LED gets turned off.

Fixes 81fe8e5b73e3 ("leds: core: Add led_set_brightness_nosleep{nopm} functions")
---
 drivers/leds/led-class.c | 1 +
 1 file changed, 1 insertion(+)
drivers/leds/led-class.c +1 -0
index 3363a6551a708..cc3929f858b68 100644
@@ -173,6 +173,7 @@ void led_classdev_suspend(struct led_classdev *led_cdev)
 {
 	led_cdev->flags |= LED_SUSPENDED;
 	led_set_brightness_nopm(led_cdev, 0);
+	flush_work(&led_cdev->set_brightness_work);
 }
 EXPORT_SYMBOL_GPL(led_classdev_suspend);
 
Signature · 1 line
2.25.1
author maintainer
#196 lore raw

PATCH 195/393 drm: panel: simple: Fix bpc for LG LB070WV8 panel

In reply to Greg Kroah-Hartman

From: Laurent Pinchart <[email protected]>

[ Upstream commit a6ae2fe5c9f9fd355a48fb7d21c863e5b20d6c9c ]

The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it.

Fixes dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel")
---
 drivers/gpu/drm/panel/panel-simple.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/panel/panel-simple.c +1 -1
index db91b3c031a13..346e3f9fd505a 100644
@@ -2093,7 +2093,7 @@ static const struct drm_display_mode lg_lb070wv8_mode = {
 static const struct panel_desc lg_lb070wv8 = {
 	.modes = &lg_lb070wv8_mode,
 	.num_modes = 1,
-	.bpc = 16,
+	.bpc = 8,
 	.size = {
 		.width = 151,
 		.height = 91,
Signature · 1 line
2.25.1
author maintainer
#197 lore raw

PATCH 196/393 phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit dcbabfeb17c3c2fdb6bc92a3031ecd37df1834a8 ]

PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.

Fixes d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
---
 drivers/phy/samsung/phy-exynos5-usbdrd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/phy/samsung/phy-exynos5-usbdrd.c +3 -1
index e510732afb8b0..7f6279fb4f8fa 100644
@@ -714,7 +714,9 @@ static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
 	struct phy_usb_instance *inst = phy_get_drvdata(phy);
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 
-	return exynos5420_usbdrd_phy_calibrate(phy_drd);
+	if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
+		return exynos5420_usbdrd_phy_calibrate(phy_drd);
+	return 0;
 }
 
 static const struct phy_ops exynos5_usbdrd_phy_ops = {
Signature · 1 line
2.25.1
author maintainer
#198 lore raw

PATCH 197/393 mmc: sdhci-of-arasan: Add missed checks for devm_clk_register()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit c99e1d0c91ac8d7db3062ea1af315f21295701d7 ]

These functions do not check the return value of devm_clk_register():
- sdhci_arasan_register_sdcardclk()
- sdhci_arasan_register_sampleclk()

Therefore, add the missed checks to fix them.

Fixes c390f2110adf1 ("mmc: sdhci-of-arasan: Add ability to export card clock")
---
 drivers/mmc/host/sdhci-of-arasan.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/mmc/host/sdhci-of-arasan.c +4 -0
index d4905c106c060..28091d3f704b7 100644
@@ -1020,6 +1020,8 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 	clk_data->sdcardclk_hw.init = &sdcardclk_init;
 	clk_data->sdcardclk =
 		devm_clk_register(dev, &clk_data->sdcardclk_hw);
+	if (IS_ERR(clk_data->sdcardclk))
+		return PTR_ERR(clk_data->sdcardclk);
 	clk_data->sdcardclk_hw.init = NULL;
 
 	ret = of_clk_add_provider(np, of_clk_src_simple_get,
@@ -1072,6 +1074,8 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 	clk_data->sampleclk_hw.init = &sampleclk_init;
 	clk_data->sampleclk =
 		devm_clk_register(dev, &clk_data->sampleclk_hw);
+	if (IS_ERR(clk_data->sampleclk))
+		return PTR_ERR(clk_data->sampleclk);
 	clk_data->sampleclk_hw.init = NULL;
 
 	ret = of_clk_add_provider(np, of_clk_src_simple_get,
Signature · 1 line
2.25.1
author maintainer
#199 lore raw

PATCH 198/393 drm/bridge: sil_sii8620: initialize return of sii8620_readb

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 02cd2d3144653e6e2a0c7ccaa73311e48e2dc686 ]

clang static analysis flags this error

sil-sii8620.c:184:2: warning: Undefined or garbage value
returned to caller [core.uninitialized.UndefReturn]

        return ret;
        ^~~~~~~~~~

sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'.

So initialize ret.

---
 drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/sil-sii8620.c +1 -1
index 92acd336aa894..ca98133411aab 100644
@@ -178,7 +178,7 @@ static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
 
 static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
 {
-	u8 ret;
+	u8 ret = 0;
 
 	sii8620_read_buf(ctx, addr, &ret, 1);
 	return ret;
Signature · 1 line
2.25.1
author maintainer
#200 lore raw

PATCH 199/393 scsi: scsi_debug: Add check for sdebug_max_queue during module init

In reply to Greg Kroah-Hartman

From: John Garry <[email protected]>

[ Upstream commit c87bf24cfb60bce27b4d2c7e56ebfd86fb9d16bb ]

sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like this can be triggered by passing an out-of-range value:

Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--)
 pc : schedule_resp+0x2a4/0xa70 [scsi_debug]
 lr : schedule_resp+0x52c/0xa70 [scsi_debug]
 sp : ffff800022ab36f0
 x29: ffff800022ab36f0 x28: ffff0023a935a610
 x27: ffff800008e0a648 x26: 0000000000000003
 x25: ffff0023e84f3200 x24: 00000000003d0900
 x23: 0000000000000000 x22: 0000000000000000
 x21: ffff0023be60a320 x20: ffff0023be60b538
 x19: ffff800008e13000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: 0000000000000000
 x9 : 0000000000000001 x8 : 0000000000000000
 x7 : 0000000000000000 x6 : 00000000000000c1
 x5 : 0000020000200000 x4 : dead0000000000ff
 x3 : 0000000000000200 x2 : 0000000000000200
 x1 : ffff800008e13d88 x0 : 0000000000000000
 Call trace:
schedule_resp+0x2a4/0xa70 [scsi_debug]
scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug]
scsi_queue_rq+0x698/0x840
__blk_mq_try_issue_directly+0x108/0x228
blk_mq_request_issue_directly+0x58/0x98
blk_mq_try_issue_list_directly+0x5c/0xf0
blk_mq_sched_insert_requests+0x18c/0x200
blk_mq_flush_plug_list+0x11c/0x190
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x38/0x210
blkdev_direct_IO+0x450/0x4d8
generic_file_read_iter+0x84/0x180
blkdev_read_iter+0x3c/0x50
aio_read+0xc0/0x170
io_submit_one+0x5c8/0xc98
__arm64_sys_io_submit+0x1b0/0x258
el0_svc_common.constprop.3+0x68/0x170
do_el0_svc+0x24/0x90
el0_sync_handler+0x13c/0x1a8
el0_sync+0x158/0x180
 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340)

In addition, it should not be less than 1.

So add checks for these, and fail the module init for those cases.

[mkp: changed if condition to match error message]

---
 drivers/scsi/scsi_debug.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/scsi/scsi_debug.c +6 -0
index 4c6c448dc2df6..c17ff74164e86 100644
@@ -5297,6 +5297,12 @@ static int __init scsi_debug_init(void)
 		pr_err("submit_queues must be 1 or more\n");
 		return -EINVAL;
 	}
+
+	if ((sdebug_max_queue > SDEBUG_CANQUEUE) || (sdebug_max_queue < 1)) {
+		pr_err("max_queue must be in range [1, %d]\n", SDEBUG_CANQUEUE);
+		return -EINVAL;
+	}
+
 	sdebug_q_arr = kcalloc(submit_queues, sizeof(struct sdebug_queue),
 			       GFP_KERNEL);
 	if (sdebug_q_arr == NULL)
Signature · 1 line
2.25.1
author maintainer
#201 lore raw

PATCH 200/393 mwifiex: Prevent memory corruption handling keys

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e18696786548244914f36ec3c46ac99c53df99c3 ]

The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow.

Fixes 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
---
 .../wireless/marvell/mwifiex/sta_cmdresp.c    | 22 +++++++++++++------
 1 file changed, 15 insertions(+), 7 deletions(-)
drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c +15 -7
index f21660149f584..962d8bfe6f101 100644
@@ -580,6 +580,11 @@ static int mwifiex_ret_802_11_key_material_v1(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_802_11_key_material *key =
 						&resp->params.key_material;
+	int len;
+
+	len = le16_to_cpu(key->key_param_set.key_len);
+	if (len > sizeof(key->key_param_set.key))
+		return -EINVAL;
 
 	if (le16_to_cpu(key->action) == HostCmd_ACT_GEN_SET) {
 		if ((le16_to_cpu(key->key_param_set.key_info) & KEY_MCAST)) {
@@ -593,9 +598,8 @@ static int mwifiex_ret_802_11_key_material_v1(struct mwifiex_private *priv,
 
 	memset(priv->aes_key.key_param_set.key, 0,
 	       sizeof(key->key_param_set.key));
-	priv->aes_key.key_param_set.key_len = key->key_param_set.key_len;
-	memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key,
-	       le16_to_cpu(priv->aes_key.key_param_set.key_len));
+	priv->aes_key.key_param_set.key_len = cpu_to_le16(len);
+	memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key, len);
 
 	return 0;
 }
@@ -610,9 +614,14 @@ static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 					      struct host_cmd_ds_command *resp)
 {
 	struct host_cmd_ds_802_11_key_material_v2 *key_v2;
-	__le16 len;
+	int len;
 
 	key_v2 = &resp->params.key_material_v2;
+
+	len = le16_to_cpu(key_v2->key_param_set.key_params.aes.key_len);
+	if (len > WLAN_KEY_LEN_CCMP)
+		return -EINVAL;
+
 	if (le16_to_cpu(key_v2->action) == HostCmd_ACT_GEN_SET) {
 		if ((le16_to_cpu(key_v2->key_param_set.key_info) & KEY_MCAST)) {
 			mwifiex_dbg(priv->adapter, INFO, "info: key: GTK is set\n");
@@ -628,10 +637,9 @@ static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 	memset(priv->aes_key_v2.key_param_set.key_params.aes.key, 0,
 	       WLAN_KEY_LEN_CCMP);
 	priv->aes_key_v2.key_param_set.key_params.aes.key_len =
-				key_v2->key_param_set.key_params.aes.key_len;
-	len = priv->aes_key_v2.key_param_set.key_params.aes.key_len;
+				cpu_to_le16(len);
 	memcpy(priv->aes_key_v2.key_param_set.key_params.aes.key,
-	       key_v2->key_param_set.key_params.aes.key, le16_to_cpu(len));
+	       key_v2->key_param_set.key_params.aes.key, len);
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#202 lore raw

PATCH 201/393 kernfs: do not call fsnotify() with name without a parent

In reply to Greg Kroah-Hartman

From: Amir Goldstein <[email protected]>

[ Upstream commit 9991bb84b27a2594187898f261866cfc50255454 ]

When creating an FS_MODIFY event on inode itself (not on parent) the file_name argument should be NULL.

The change to send a non NULL name to inode itself was done on purpuse as part of another commit, as Tejun writes: "...While at it, supply the target file name to fsnotify() from kernfs_node->name.".

But this is wrong practice and inconsistent with inotify behavior when watching a single file. When a child is being watched (as opposed to the parent directory) the inotify event should contain the watch descriptor, but not the file name.

---
 fs/kernfs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/kernfs/file.c +1 -1
index 34366db3620d6..2a1879a6e7957 100644
@@ -912,7 +912,7 @@ static void kernfs_notify_workfn(struct work_struct *work)
 		}
 
 		fsnotify(inode, FS_MODIFY, inode, FSNOTIFY_EVENT_INODE,
-			 &name, 0);
+			 NULL, 0);
 		iput(inode);
 	}
 
Signature · 1 line
2.25.1
author maintainer
#203 lore raw

PATCH 202/393 powerpc/pseries: remove cede offline state for CPUs

In reply to Greg Kroah-Hartman

From: Nathan Lynch <[email protected]>

[ Upstream commit 48f6e7f6d948b56489da027bc3284c709b939d28 ]

This effectively reverts commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state"), which added an offline mode for CPUs which uses the H_CEDE hcall instead of the architected stop-self RTAS function in order to facilitate "folding" of dedicated mode processors on PowerVM platforms to achieve energy savings. This has been the default offline mode since its introduction.

There's nothing about stop-self that would prevent the hypervisor from achieving the energy savings available via H_CEDE, so the original premise of this change appears to be flawed.

I also have encountered the claim that the transition to and from ceded state is much faster than stop-self/start-cpu. Certainly we would not want to use stop-self as an *idle* mode. That is what H_CEDE is for. However, this difference is insignificant in the context of Linux CPU hotplug, where the latency of an offline or online operation on current systems is on the order of 100ms, mainly attributable to all the various subsystems' cpuhp callbacks.

The cede offline mode also prevents accurate accounting, as discussed before:
https://lore.kernel.org/linuxppc-dev/[email protected]/

Unconditionally use stop-self to offline processor threads. This is the architected method for offlining CPUs on PAPR systems.

The "cede_offline" boot parameter is rendered obsolete.

Removing this code enables the removal of the partition suspend code which temporarily onlines all present CPUs.

Fixes 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state")
---
 Documentation/core-api/cpu_hotplug.rst        |   7 -
 arch/powerpc/platforms/pseries/hotplug-cpu.c  | 170 ++----------------
 .../platforms/pseries/offline_states.h        |  38 ----
 arch/powerpc/platforms/pseries/pmem.c         |   1 -
 arch/powerpc/platforms/pseries/smp.c          |  28 +--
 5 files changed, 15 insertions(+), 229 deletions(-)
 delete mode 100644 arch/powerpc/platforms/pseries/offline_states.h
Documentation/core-api/cpu_hotplug.rst +0 -7
index 4a50ab7817f77..b1ae1ac159cf9 100644
@@ -50,13 +50,6 @@ Command Line Switches
 
   This option is limited to the X86 and S390 architecture.
 
-``cede_offline={"off","on"}``
-  Use this option to disable/enable putting offlined processors to an extended
-  ``H_CEDE`` state on supported pseries platforms. If nothing is specified,
-  ``cede_offline`` is set to "on".
-
-  This option is limited to the PowerPC architecture.
-
 ``cpu0_hotplug``
   Allow to shutdown CPU0.
 
arch/powerpc/platforms/pseries/hotplug-cpu.c +14 -156

229 lines not on this page · raw message

arch/powerpc/platforms/pseries/offline_states.h deleted +0 -38
deleted file mode 100644
index 51414aee28625..0000000000000
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _OFFLINE_STATES_H_
-#define _OFFLINE_STATES_H_
-
-/* Cpu offline states go here */
-enum cpu_state_vals {
-	CPU_STATE_OFFLINE,
-	CPU_STATE_INACTIVE,
-	CPU_STATE_ONLINE,
-	CPU_MAX_OFFLINE_STATES
-};
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern enum cpu_state_vals get_cpu_current_state(int cpu);
-extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
-extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
-extern void set_default_offline_state(int cpu);
-#else
-static inline enum cpu_state_vals get_cpu_current_state(int cpu)
-{
-	return CPU_STATE_ONLINE;
-}
-
-static inline void set_cpu_current_state(int cpu, enum cpu_state_vals state)
-{
-}
-
-static inline void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
-{
-}
-
-static inline void set_default_offline_state(int cpu)
-{
-}
-#endif
-
-extern enum cpu_state_vals get_preferred_offline_state(int cpu);
-#endif
arch/powerpc/platforms/pseries/pmem.c +0 -1
index f860a897a9e05..f827de7087e9b 100644
@@ -24,7 +24,6 @@
 #include <asm/topology.h>
 
 #include "pseries.h"
-#include "offline_states.h"
 
 static struct device_node *pmem_node;
 
arch/powerpc/platforms/pseries/smp.c +1 -27
index ad61e90032da9..a8a070269151f 100644
@@ -44,8 +44,6 @@
 #include <asm/svm.h>
 
 #include "pseries.h"
-#include "offline_states.h"
-
 
 /*
  * The Primary thread of each non-boot processor was started from the OF client
@@ -108,10 +106,7 @@ static inline int smp_startup_cpu(unsigned int lcpu)
 
 	/* Fixup atomic count: it exited inside IRQ handler. */
 	task_thread_info(paca_ptrs[lcpu]->__current)->preempt_count	= 0;
-#ifdef CONFIG_HOTPLUG_CPU
-	if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
-		goto out;
-#endif
+
 	/* 
 	 * If the RTAS start-cpu token does not exist then presume the
 	 * cpu is already spinning.
@@ -126,9 +121,6 @@ static inline int smp_startup_cpu(unsigned int lcpu)
 		return 0;
 	}
 
-#ifdef CONFIG_HOTPLUG_CPU
-out:
-#endif
 	return 1;
 }
 
@@ -143,10 +135,6 @@ static void smp_setup_cpu(int cpu)
 		vpa_init(cpu);
 
 	cpumask_clear_cpu(cpu, of_spin_mask);
-#ifdef CONFIG_HOTPLUG_CPU
-	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
-	set_default_offline_state(cpu);
-#endif
 }
 
 static int smp_pSeries_kick_cpu(int nr)
@@ -163,20 +151,6 @@ static int smp_pSeries_kick_cpu(int nr)
 	 * the processor will continue on to secondary_start
 	 */
 	paca_ptrs[nr]->cpu_start = 1;
-#ifdef CONFIG_HOTPLUG_CPU
-	set_preferred_offline_state(nr, CPU_STATE_ONLINE);
-
-	if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
-		long rc;
-		unsigned long hcpuid;
-
-		hcpuid = get_hard_smp_processor_id(nr);
-		rc = plpar_hcall_norets(H_PROD, hcpuid);
-		if (rc != H_SUCCESS)
-			printk(KERN_ERR "Error: Prod to wake up processor %d "
-						"Ret= %ld\n", nr, rc);
-	}
-#endif
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#204 lore raw

PATCH 203/393 powerpc/rtas: dont online CPUs for partition suspend

In reply to Greg Kroah-Hartman

From: Nathan Lynch <[email protected]>

[ Upstream commit ec2fc2a9e9bbad9023aab65bc472ce7a3ca8608f ]

Partition suspension, used for hibernation and migration, requires that the OS place all but one of the LPAR's processor threads into one of two states prior to calling the ibm,suspend-me RTAS function:

* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition resumes execution

Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state"), means that any threads which are offline from Linux's point of view must be moved to one of those two states before a partition suspension can proceed.

This was eventually addressed in commit 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation"), which added code to temporarily bring up any offline processor threads so they can call H_JOIN. Conceptually this is fine, but the implementation has had multiple races with cpu hotplug operations initiated from user space[1][2][3], the error handling is fragile, and it generates user-visible cpu hotplug events which is a lot of noise for a platform feature that's supposed to minimize disruption to workloads.

With commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state") reverted, this code becomes unnecessary, so remove it. Since any offline CPUs now are truly offline from the platform's point of view, it is no longer necessary to bring up CPUs only to have them call H_JOIN and then go offline again upon resuming. Only active threads are required to call H_JOIN; stopped threads can be left alone.

[1] commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM")
[2] commit 9fb603050ffd ("powerpc/rtas: retry when cpu offline races with suspend/migration")
[3] commit dfd718a2ed1f ("powerpc/rtas: Fix a potential race between CPU-Offline & Migration")

Fixes 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
---
 arch/powerpc/include/asm/rtas.h          |   2 -
 arch/powerpc/kernel/rtas.c               | 122 +----------------------
 arch/powerpc/platforms/pseries/suspend.c |  22 +---
 3 files changed, 3 insertions(+), 143 deletions(-)
arch/powerpc/include/asm/rtas.h +0 -2
index 3c1887351c713..bd227e0eab07b 100644
@@ -368,8 +368,6 @@ extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
 extern void rtas_progress(char *s, unsigned short hex);
 extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data);
 extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data);
-extern int rtas_online_cpus_mask(cpumask_var_t cpus);
-extern int rtas_offline_cpus_mask(cpumask_var_t cpus);
 extern int rtas_ibm_suspend_me(u64 handle);
 
 struct rtc_time;
arch/powerpc/kernel/rtas.c +2 -120

157 lines not on this page · raw message

arch/powerpc/platforms/pseries/suspend.c +1 -21
index 0a24a5a185f02..f789693f61f40 100644
@@ -132,15 +132,11 @@ static ssize_t store_hibernate(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	cpumask_var_t offline_mask;
 	int rc;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (!alloc_cpumask_var(&offline_mask, GFP_KERNEL))
-		return -ENOMEM;
-
 	stream_id = simple_strtoul(buf, NULL, 16);
 
 	do {
@@ -150,32 +146,16 @@ static ssize_t store_hibernate(struct device *dev,
 	} while (rc == -EAGAIN);
 
 	if (!rc) {
-		/* All present CPUs must be online */
-		cpumask_andnot(offline_mask, cpu_present_mask,
-				cpu_online_mask);
-		rc = rtas_online_cpus_mask(offline_mask);
-		if (rc) {
-			pr_err("%s: Could not bring present CPUs online.\n",
-					__func__);
-			goto out;
-		}
-
 		stop_topology_update();
 		rc = pm_suspend(PM_SUSPEND_MEM);
 		start_topology_update();
-
-		/* Take down CPUs not online prior to suspend */
-		if (!rtas_offline_cpus_mask(offline_mask))
-			pr_warn("%s: Could not restore CPUs to offline "
-					"state.\n", __func__);
 	}
 
 	stream_id = 0;
 
 	if (!rc)
 		rc = count;
-out:
-	free_cpumask_var(offline_mask);
+
 	return rc;
 }
 
Signature · 1 line
2.25.1
author maintainer
#205 lore raw

PATCH 204/393 powerpc/vdso: Fix vdso cpu truncation

In reply to Greg Kroah-Hartman

From: Milton Miller <[email protected]>

[ Upstream commit a9f675f950a07d5c1dbcbb97aabac56f5ed085e3 ]

The code in vdso_cpu_init that exposes the cpu and numa node to userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means that any kernel running on a box with more than 4096 threads (NR_CPUS advertises a limit of of 8192 cpus) would expose userspace to two cpu contexts running at the same time with the same cpu number.

Note: I'm not aware of any distro shipping a kernel with support for more than 4096 threads today, nor of any system image that currently exceeds 4096 threads. Found via code browsing.

Fixes 18ad51dd342a7eb09dbcd059d0b451b616d4dafc ("powerpc: Add VDSO version of getcpu")
---
 arch/powerpc/kernel/vdso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/vdso.c +1 -1
index f38f26e844b64..1c07df1ad560e 100644
@@ -678,7 +678,7 @@ int vdso_getcpu_init(void)
 	node = cpu_to_node(cpu);
 	WARN_ON_ONCE(node > 0xffff);
 
-	val = (cpu & 0xfff) | ((node & 0xffff) << 16);
+	val = (cpu & 0xffff) | ((node & 0xffff) << 16);
 	mtspr(SPRN_SPRG_VDSO_WRITE, val);
 	get_paca()->sprg_vdso = val;
 
Signature · 1 line
2.25.1
author maintainer
#206 lore raw

PATCH 205/393 RDMA/qedr: SRQs bug fixes

In reply to Greg Kroah-Hartman

From: Yuval Basson <[email protected]>

[ Upstream commit acca72e2b031b9fbb4184511072bd246a0abcebc ]

QP's with the same SRQ, working on different CQs and running in parallel on different CPUs could lead to a race when maintaining the SRQ consumer count, and leads to FW running out of SRQs. Update the consumer atomically. Make sure the wqe_prod is updated after the sge_prod due to FW requirements.

---
 drivers/infiniband/hw/qedr/qedr.h  |  4 ++--
 drivers/infiniband/hw/qedr/verbs.c | 22 ++++++++++------------
 2 files changed, 12 insertions(+), 14 deletions(-)
drivers/infiniband/hw/qedr/qedr.h +2 -2
index 5488dbd59d3c1..8cf462a3d0f64 100644
@@ -345,10 +345,10 @@ struct qedr_srq_hwq_info {
 	u32 wqe_prod;
 	u32 sge_prod;
 	u32 wr_prod_cnt;
-	u32 wr_cons_cnt;
+	atomic_t wr_cons_cnt;
 	u32 num_elems;
 
-	u32 *virt_prod_pair_addr;
+	struct rdma_srq_producers *virt_prod_pair_addr;
 	dma_addr_t phy_prod_pair_addr;
 };
 
drivers/infiniband/hw/qedr/verbs.c +10 -12
index a5bd3adaf90aa..ac93447c95244 100644
@@ -3688,7 +3688,7 @@ static u32 qedr_srq_elem_left(struct qedr_srq_hwq_info *hw_srq)
 	 * count and consumer count and subtract it from max
 	 * work request supported so that we get elements left.
 	 */
-	used = hw_srq->wr_prod_cnt - hw_srq->wr_cons_cnt;
+	used = hw_srq->wr_prod_cnt - (u32)atomic_read(&hw_srq->wr_cons_cnt);
 
 	return hw_srq->max_wr - used;
 }
@@ -3703,7 +3703,6 @@ int qedr_post_srq_recv(struct ib_srq *ibsrq, const struct ib_recv_wr *wr,
 	unsigned long flags;
 	int status = 0;
 	u32 num_sge;
-	u32 offset;
 
 	spin_lock_irqsave(&srq->lock, flags);
 
@@ -3716,7 +3715,8 @@ int qedr_post_srq_recv(struct ib_srq *ibsrq, const struct ib_recv_wr *wr,
 		if (!qedr_srq_elem_left(hw_srq) ||
 		    wr->num_sge > srq->hw_srq.max_sges) {
 			DP_ERR(dev, "Can't post WR  (%d,%d) || (%d > %d)\n",
-			       hw_srq->wr_prod_cnt, hw_srq->wr_cons_cnt,
+			       hw_srq->wr_prod_cnt,
+			       atomic_read(&hw_srq->wr_cons_cnt),
 			       wr->num_sge, srq->hw_srq.max_sges);
 			status = -ENOMEM;
 			*bad_wr = wr;
@@ -3750,22 +3750,20 @@ int qedr_post_srq_recv(struct ib_srq *ibsrq, const struct ib_recv_wr *wr,
 			hw_srq->sge_prod++;
 		}
 
-		/* Flush WQE and SGE information before
+		/* Update WQE and SGE information before
 		 * updating producer.
 		 */
-		wmb();
+		dma_wmb();
 
 		/* SRQ producer is 8 bytes. Need to update SGE producer index
 		 * in first 4 bytes and need to update WQE producer in
 		 * next 4 bytes.
 		 */
-		*srq->hw_srq.virt_prod_pair_addr = hw_srq->sge_prod;
-		offset = offsetof(struct rdma_srq_producers, wqe_prod);
-		*((u8 *)srq->hw_srq.virt_prod_pair_addr + offset) =
-			hw_srq->wqe_prod;
+		srq->hw_srq.virt_prod_pair_addr->sge_prod = hw_srq->sge_prod;
+		/* Make sure sge producer is updated first */
+		dma_wmb();
+		srq->hw_srq.virt_prod_pair_addr->wqe_prod = hw_srq->wqe_prod;
 
-		/* Flush producer after updating it. */
-		wmb();
 		wr = wr->next;
 	}
 
@@ -4184,7 +4182,7 @@ static int process_resp_one_srq(struct qedr_dev *dev, struct qedr_qp *qp,
 	} else {
 		__process_resp_one(dev, qp, cq, wc, resp, wr_id);
 	}
-	srq->hw_srq.wr_cons_cnt++;
+	atomic_inc(&srq->hw_srq.wr_cons_cnt);
 
 	return 1;
 }
Signature · 1 line
2.25.1
author maintainer
#207 lore raw

PATCH 206/393 RDMA/rxe: Prevent access to wr->next ptr afrer wr is posted to send queue

In reply to Greg Kroah-Hartman

From: Mikhail Malygin <[email protected]>

[ Upstream commit 5f0b2a6093a4d9aab093964c65083fe801ef1e58 ]

rxe_post_send_kernel() iterates over linked list of wr's, until the wr->next ptr is NULL. However if we've got an interrupt after last wr is posted, control may be returned to the code after send completion callback is executed and wr memory is freed.

As a result, wr->next pointer may contain incorrect value leading to panic. Store the wr->next on the stack before posting it.

---
 drivers/infiniband/sw/rxe/rxe_verbs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/infiniband/sw/rxe/rxe_verbs.c +4 -1
index 9dd4bd7aea92e..2aaa0b592a2d8 100644
@@ -683,6 +683,7 @@ static int rxe_post_send_kernel(struct rxe_qp *qp, const struct ib_send_wr *wr,
 	unsigned int mask;
 	unsigned int length = 0;
 	int i;
+	struct ib_send_wr *next;
 
 	while (wr) {
 		mask = wr_opcode_mask(wr->opcode, qp);
@@ -699,6 +700,8 @@ static int rxe_post_send_kernel(struct rxe_qp *qp, const struct ib_send_wr *wr,
 			break;
 		}
 
+		next = wr->next;
+
 		length = 0;
 		for (i = 0; i < wr->num_sge; i++)
 			length += wr->sg_list[i].length;
@@ -709,7 +712,7 @@ static int rxe_post_send_kernel(struct rxe_qp *qp, const struct ib_send_wr *wr,
 			*bad_wr = wr;
 			break;
 		}
-		wr = wr->next;
+		wr = next;
 	}
 
 	rxe_run_task(&qp->req.task, 1);
Signature · 1 line
2.25.1
author maintainer
#208 lore raw

PATCH 207/393 ima: Have the LSM free its audit rule

In reply to Greg Kroah-Hartman

From: Tyler Hicks <[email protected]>

[ Upstream commit 9ff8a616dfab96a4fa0ddd36190907dc68886d9b ]

Ask the LSM to free its audit rule rather than directly calling kfree(). Both AppArmor and SELinux do additional work in their audit_rule_free() hooks. Fix memory leaks by allowing the LSMs to perform necessary work.

Fixes b16942455193 ("ima: use the lsm policy update notifier")
Cc Janne Karhunen <[email protected]>
Cc Casey Schaufler <[email protected]>
---
 security/integrity/ima/ima.h        | 5 +++++
 security/integrity/ima/ima_policy.c | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)
security/integrity/ima/ima.h +5 -0
index 495e28bd488e6..04c246b2b767f 100644
@@ -400,6 +400,7 @@ static inline void ima_free_modsig(struct modsig *modsig)
 #ifdef CONFIG_IMA_LSM_RULES
 
 #define security_filter_rule_init security_audit_rule_init
+#define security_filter_rule_free security_audit_rule_free
 #define security_filter_rule_match security_audit_rule_match
 
 #else
@@ -410,6 +411,10 @@ static inline int security_filter_rule_init(u32 field, u32 op, char *rulestr,
 	return -EINVAL;
 }
 
+static inline void security_filter_rule_free(void *lsmrule)
+{
+}
+
 static inline int security_filter_rule_match(u32 secid, u32 field, u32 op,
 					     void *lsmrule)
 {
security/integrity/ima/ima_policy.c +1 -1
index e493063a3c344..236a731492d1e 100644
@@ -258,7 +258,7 @@ static void ima_lsm_free_rule(struct ima_rule_entry *entry)
 	int i;
 
 	for (i = 0; i < MAX_LSM_RULES; i++) {
-		kfree(entry->lsm[i].rule);
+		security_filter_rule_free(entry->lsm[i].rule);
 		kfree(entry->lsm[i].args_p);
 	}
 	kfree(entry);
Signature · 1 line
2.25.1
author maintainer
#209 lore raw

PATCH 208/393 ima: Free the entire rule when deleting a list of rules

In reply to Greg Kroah-Hartman

From: Tyler Hicks <[email protected]>

[ Upstream commit 465aee77aae857b5fcde56ee192b33dc369fba04 ]

Create a function, ima_free_rule(), to free all memory associated with an ima_rule_entry. Use the new function to fix memory leaks of allocated ima_rule_entry members, such as .fsname and .keyrings, when deleting a list of rules.

Make the existing ima_lsm_free_rule() function specific to the LSM audit rule array of an ima_rule_entry and require that callers make an additional call to kfree to free the ima_rule_entry itself.

This fixes a memory leak seen when loading by a valid rule that contains an additional piece of allocated memory, such as an fsname, followed by an invalid rule that triggers a policy load failure:

 # echo -e "dont_measure fsname=securityfs\nbad syntax" > \
    /sys/kernel/security/ima/policy
 -bash: echo: write error: Invalid argument
 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
 unreferenced object 0xffff9bab67ca12c0 (size 16):
   comm "bash", pid 684, jiffies 4295212803 (age 252.344s)
   hex dump (first 16 bytes):
     73 65 63 75 72 69 74 79 66 73 00 6b 6b 6b 6b a5  securityfs.kkkk.
   backtrace:
     [<00000000adc80b1b>] kstrdup+0x2e/0x60
     [<00000000d504cb0d>] ima_parse_add_rule+0x7d4/0x1020
     [<00000000444825ac>] ima_write_policy+0xab/0x1d0
     [<000000002b7f0d6c>] vfs_write+0xde/0x1d0
     [<0000000096feedcf>] ksys_write+0x68/0xe0
     [<0000000052b544a2>] do_syscall_64+0x56/0xa0
     [<000000007ead1ba7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes f1b08bbcbdaf ("ima: define a new policy condition based on the filesystem name")
Fixes 2b60c0ecedf8 ("IMA: Read keyrings= option from the IMA policy")
---
 security/integrity/ima/ima_policy.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)
security/integrity/ima/ima_policy.c +24 -5
index 236a731492d1e..641582230861c 100644
@@ -261,6 +261,21 @@ static void ima_lsm_free_rule(struct ima_rule_entry *entry)
 		security_filter_rule_free(entry->lsm[i].rule);
 		kfree(entry->lsm[i].args_p);
 	}
+}
+
+static void ima_free_rule(struct ima_rule_entry *entry)
+{
+	if (!entry)
+		return;
+
+	/*
+	 * entry->template->fields may be allocated in ima_parse_rule() but that
+	 * reference is owned by the corresponding ima_template_desc element in
+	 * the defined_templates list and cannot be freed here
+	 */
+	kfree(entry->fsname);
+	kfree(entry->keyrings);
+	ima_lsm_free_rule(entry);
 	kfree(entry);
 }
 
@@ -302,6 +317,7 @@ static struct ima_rule_entry *ima_lsm_copy_rule(struct ima_rule_entry *entry)
 
 out_err:
 	ima_lsm_free_rule(nentry);
+	kfree(nentry);
 	return NULL;
 }
 
@@ -315,7 +331,14 @@ static int ima_lsm_update_rule(struct ima_rule_entry *entry)
 
 	list_replace_rcu(&entry->list, &nentry->list);
 	synchronize_rcu();
+	/*
+	 * ima_lsm_copy_rule() shallow copied all references, except for the
+	 * LSM references, from entry to nentry so we only want to free the LSM
+	 * references and the entry itself. All other memory refrences will now
+	 * be owned by nentry.
+	 */
 	ima_lsm_free_rule(entry);
+	kfree(entry);
 
 	return 0;
 }
@@ -1402,15 +1425,11 @@ ssize_t ima_parse_add_rule(char *rule)
 void ima_delete_rules(void)
 {
 	struct ima_rule_entry *entry, *tmp;
-	int i;
 
 	temp_ima_appraise = 0;
 	list_for_each_entry_safe(entry, tmp, &ima_temp_rules, list) {
-		for (i = 0; i < MAX_LSM_RULES; i++)
-			kfree(entry->lsm[i].args_p);
-
 		list_del(&entry->list);
-		kfree(entry);
+		ima_free_rule(entry);
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#210 lore raw

PATCH 209/393 ima: Free the entire rule if it fails to parse

In reply to Greg Kroah-Hartman

From: Tyler Hicks <[email protected]>

[ Upstream commit 2bdd737c5687d6dec30e205953146ede8a87dbdd ]

Use ima_free_rule() to fix memory leaks of allocated ima_rule_entry members, such as .fsname and .keyrings, when an error is encountered during rule parsing.

Set the args_p pointer to NULL after freeing it in the error path of ima_lsm_rule_init() so that it isn't freed twice.

This fixes a memory leak seen when loading an rule that contains an additional piece of allocated memory, such as an fsname, followed by an invalid conditional:

 # echo "measure fsname=tmpfs bad=cond" > /sys/kernel/security/ima/policy
 -bash: echo: write error: Invalid argument
 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
 unreferenced object 0xffff98e7e4ece6c0 (size 8):
   comm "bash", pid 672, jiffies 4294791843 (age 21.855s)
   hex dump (first 8 bytes):
     74 6d 70 66 73 00 6b a5                          tmpfs.k.
   backtrace:
     [<00000000abab7413>] kstrdup+0x2e/0x60
     [<00000000f11ede32>] ima_parse_add_rule+0x7d4/0x1020
     [<00000000f883dd7a>] ima_write_policy+0xab/0x1d0
     [<00000000b17cf753>] vfs_write+0xde/0x1d0
     [<00000000b8ddfdea>] ksys_write+0x68/0xe0
     [<00000000b8e21e87>] do_syscall_64+0x56/0xa0
     [<0000000089ea7b98>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes f1b08bbcbdaf ("ima: define a new policy condition based on the filesystem name")
Fixes 2b60c0ecedf8 ("IMA: Read keyrings= option from the IMA policy")
---
 security/integrity/ima/ima_policy.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
security/integrity/ima/ima_policy.c +2 -1
index 641582230861c..18271920d315d 100644
@@ -913,6 +913,7 @@ static int ima_lsm_rule_init(struct ima_rule_entry *entry,
 
 		if (ima_rules == &ima_default_rules) {
 			kfree(entry->lsm[lsm_rule].args_p);
+			entry->lsm[lsm_rule].args_p = NULL;
 			result = -EINVAL;
 		} else
 			result = 0;
@@ -1404,7 +1405,7 @@ ssize_t ima_parse_add_rule(char *rule)
 
 	result = ima_parse_rule(p, entry);
 	if (result) {
-		kfree(entry);
+		ima_free_rule(entry);
 		integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL,
 				    NULL, op, "invalid-policy", result,
 				    audit_info);
Signature · 1 line
2.25.1
author maintainer
#211 lore raw

PATCH 210/393 ima: Fail rule parsing when buffer hook functions have an invalid action

In reply to Greg Kroah-Hartman

From: Tyler Hicks <[email protected]>

[ Upstream commit 712183437ebebc89cd086ef96cf9a521fd97fd09 ]

Buffer based hook functions, such as KEXEC_CMDLINE and KEY_CHECK, can only measure. The process_buffer_measurement() function quietly ignores all actions except measure so make this behavior clear at the time of policy load.

The parsing of the keyrings conditional had a check to ensure that it was only specified with measure actions but the check should be on the hook function and not the keyrings conditional since "appraise func=KEY_CHECK" is not a valid rule.

Fixes b0935123a183 ("IMA: Define a new hook to measure the kexec boot command line arguments")
Fixes 5808611cccb2 ("IMA: Add KEY_CHECK func to measure keys")
---
 security/integrity/ima/ima_policy.c | 40 +++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)
security/integrity/ima/ima_policy.c +38 -2
index 18271920d315d..a3d72342408ad 100644
@@ -973,6 +973,43 @@ static void check_template_modsig(const struct ima_template_desc *template)
 #undef MSG
 }
 
+static bool ima_validate_rule(struct ima_rule_entry *entry)
+{
+	/* Ensure that the action is set */
+	if (entry->action == UNKNOWN)
+		return false;
+
+	/*
+	 * Ensure that the hook function is compatible with the other
+	 * components of the rule
+	 */
+	switch (entry->func) {
+	case NONE:
+	case FILE_CHECK:
+	case MMAP_CHECK:
+	case BPRM_CHECK:
+	case CREDS_CHECK:
+	case POST_SETATTR:
+	case MODULE_CHECK:
+	case FIRMWARE_CHECK:
+	case KEXEC_KERNEL_CHECK:
+	case KEXEC_INITRAMFS_CHECK:
+	case POLICY_CHECK:
+		/* Validation of these hook functions is in ima_parse_rule() */
+		break;
+	case KEXEC_CMDLINE:
+	case KEY_CHECK:
+		if (entry->action & ~(MEASURE | DONT_MEASURE))
+			return false;
+
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+
 static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
 {
 	struct audit_buffer *ab;
@@ -1150,7 +1187,6 @@ static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
 			keyrings_len = strlen(args[0].from) + 1;
 
 			if ((entry->keyrings) ||
-			    (entry->action != MEASURE) ||
 			    (entry->func != KEY_CHECK) ||
 			    (keyrings_len < 2)) {
 				result = -EINVAL;
@@ -1356,7 +1392,7 @@ static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
 			break;
 		}
 	}
-	if (!result && (entry->action == UNKNOWN))
+	if (!result && !ima_validate_rule(entry))
 		result = -EINVAL;
 	else if (entry->action == APPRAISE)
 		temp_ima_appraise |= ima_appraise_flag(entry->func);
Signature · 1 line
2.25.1
author maintainer
#212 lore raw

PATCH 211/393 ima: Fail rule parsing when the KEXEC_CMDLINE hook is combined with an invalid cond

In reply to Greg Kroah-Hartman

From: Tyler Hicks <[email protected]>

[ Upstream commit db2045f5892a9db7354442bf77f9b03b50ff9ee1 ]

The KEXEC_CMDLINE hook function only supports the pcr conditional. Make this clear at policy load so that IMA policy authors don't assume that other conditionals are supported.

Since KEXEC_CMDLINE's inception, ima_match_rules() has always returned true on any loaded KEXEC_CMDLINE rule without any consideration for other conditionals present in the rule. Make it clear that pcr is the only supported KEXEC_CMDLINE conditional by returning an error during policy load.

An example of why this is a problem can be explained with the following rule:

dont_measure func=KEXEC_CMDLINE obj_type=foo_t

An IMA policy author would have assumed that rule is valid because the parser accepted it but the result was that measurements for all KEXEC_CMDLINE operations would be disabled.

Fixes b0935123a183 ("IMA: Define a new hook to measure the kexec boot command line arguments")
---
 security/integrity/ima/ima_policy.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
security/integrity/ima/ima_policy.c +21 -0
index a3d72342408ad..a77e0b34e72f7 100644
@@ -343,6 +343,17 @@ static int ima_lsm_update_rule(struct ima_rule_entry *entry)
 	return 0;
 }
 
+static bool ima_rule_contains_lsm_cond(struct ima_rule_entry *entry)
+{
+	int i;
+
+	for (i = 0; i < MAX_LSM_RULES; i++)
+		if (entry->lsm[i].args_p)
+			return true;
+
+	return false;
+}
+
 /*
  * The LSM policy can be reloaded, leaving the IMA LSM based rules referring
  * to the old, stale LSM policy.  Update the IMA LSM based rules to reflect
@@ -998,6 +1009,16 @@ static bool ima_validate_rule(struct ima_rule_entry *entry)
 		/* Validation of these hook functions is in ima_parse_rule() */
 		break;
 	case KEXEC_CMDLINE:
+		if (entry->action & ~(MEASURE | DONT_MEASURE))
+			return false;
+
+		if (entry->flags & ~(IMA_FUNC | IMA_PCR))
+			return false;
+
+		if (ima_rule_contains_lsm_cond(entry))
+			return false;
+
+		break;
 	case KEY_CHECK:
 		if (entry->action & ~(MEASURE | DONT_MEASURE))
 			return false;
Signature · 1 line
2.25.1
author maintainer
#213 lore raw

PATCH 212/393 ima: Fail rule parsing when the KEY_CHECK hook is combined with an invalid cond

In reply to Greg Kroah-Hartman

From: Tyler Hicks <[email protected]>

[ Upstream commit eb624fe214a2e156ddafd9868377cf91499f789d ]

The KEY_CHECK function only supports the uid, pcr, and keyrings conditionals. Make this clear at policy load so that IMA policy authors don't assume that other conditionals are supported.

Fixes 5808611cccb2 ("IMA: Add KEY_CHECK func to measure keys")
---
 security/integrity/ima/ima_policy.c | 7 +++++++
 1 file changed, 7 insertions(+)
security/integrity/ima/ima_policy.c +7 -0
index a77e0b34e72f7..3e3e568c81309 100644
@@ -1023,6 +1023,13 @@ static bool ima_validate_rule(struct ima_rule_entry *entry)
 		if (entry->action & ~(MEASURE | DONT_MEASURE))
 			return false;
 
+		if (entry->flags & ~(IMA_FUNC | IMA_UID | IMA_PCR |
+				     IMA_KEYRINGS))
+			return false;
+
+		if (ima_rule_contains_lsm_cond(entry))
+			return false;
+
 		break;
 	default:
 		return false;
Signature · 1 line
2.25.1
author maintainer
#214 lore raw

PATCH 213/393 staging: rtl8192u: fix a dubious looking mask before a shift

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit c4283950a9a4d3bf4a3f362e406c80ab14f10714 ]

Currently the masking of ret with 0xff and followed by a right shift of 8 bits always leaves a zero result. It appears the mask of 0xff is incorrect and should be 0xff00, but I don't have the hardware to test this. Fix this to mask the upper 8 bits before shifting.

[ Not tested ]

Addresses-Coverity: ("Operands don't affect result")

Fixes 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
---
 drivers/staging/rtl8192u/r8192U_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192u/r8192U_core.c +1 -1
index fcfb9024a83f0..6ec65187bef91 100644
@@ -2374,7 +2374,7 @@ static int rtl8192_read_eeprom_info(struct net_device *dev)
 				ret = eprom_read(dev, (EEPROM_TX_PW_INDEX_CCK >> 1));
 				if (ret < 0)
 					return ret;
-				priv->EEPROMTxPowerLevelCCK = ((u16)ret & 0xff) >> 8;
+				priv->EEPROMTxPowerLevelCCK = ((u16)ret & 0xff00) >> 8;
 			} else
 				priv->EEPROMTxPowerLevelCCK = 0x10;
 			RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
Signature · 1 line
2.25.1
author maintainer
#215 lore raw

PATCH 214/393 ASoC: meson: fixes the missed kfree() for axg_card_add_tdm_loopback

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit bd054ece7d9cdd88e900df6625e951a01d9f655e ]

axg_card_add_tdm_loopback() misses to call kfree() in an error path. We can use devm_kasprintf() to fix the issue, also improve maintainability. So use it instead.

Fixes c84836d7f650 ("ASoC: meson: axg-card: use modern dai_link style")
---
 sound/soc/meson/axg-card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/meson/axg-card.c +1 -1
index 89f7f64747cd0..47f2d93224fea 100644
@@ -116,7 +116,7 @@ static int axg_card_add_tdm_loopback(struct snd_soc_card *card,
 
 	lb = &card->dai_link[*index + 1];
 
-	lb->name = kasprintf(GFP_KERNEL, "%s-lb", pad->name);
+	lb->name = devm_kasprintf(card->dev, GFP_KERNEL, "%s-lb", pad->name);
 	if (!lb->name)
 		return -ENOMEM;
 
Signature · 1 line
2.25.1
author maintainer
#216 lore raw

PATCH 215/393 PCI/ASPM: Add missing newline in sysfs policy

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 3167e3d340c092fd47924bc4d23117a3074ef9a9 ]

When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline.

[root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]#

Fixes 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
---
 drivers/pci/pcie/aspm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pci/pcie/aspm.c +1 -0
index b17e5ffd31b14..253c30cc19678 100644
@@ -1182,6 +1182,7 @@ static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
 			cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
 		else
 			cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
+	cnt += sprintf(buffer + cnt, "\n");
 	return cnt;
 }
 
Signature · 1 line
2.25.1
author maintainer
#217 lore raw

PATCH 216/393 go7007: add sanity checking for endpoints

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit 137641287eb40260783a4413847a0aef06023a6c ]

A malicious USB device may lack endpoints the driver assumes to exist Accessing them leads to NULL pointer accesses. This patch introduces sanity checking.

Reported-and-tested-by [email protected]
Fixes 866b8695d67e8 ("Staging: add the go7007 video driver")
---
 drivers/media/usb/go7007/go7007-usb.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/media/usb/go7007/go7007-usb.c +10 -1
index f889c9d740cd1..dbf0455d5d50d 100644
@@ -1132,6 +1132,10 @@ static int go7007_usb_probe(struct usb_interface *intf,
 		go->hpi_ops = &go7007_usb_onboard_hpi_ops;
 	go->hpi_context = usb;
 
+	ep = usb->usbdev->ep_in[4];
+	if (!ep)
+		return -ENODEV;
+
 	/* Allocate the URB and buffer for receiving incoming interrupts */
 	usb->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (usb->intr_urb == NULL)
@@ -1141,7 +1145,6 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	if (usb->intr_urb->transfer_buffer == NULL)
 		goto allocfail;
 
-	ep = usb->usbdev->ep_in[4];
 	if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
 		usb_fill_bulk_urb(usb->intr_urb, usb->usbdev,
 			usb_rcvbulkpipe(usb->usbdev, 4),
@@ -1263,9 +1266,13 @@ static int go7007_usb_probe(struct usb_interface *intf,
 
 	/* Allocate the URBs and buffers for receiving the video stream */
 	if (board->flags & GO7007_USB_EZUSB) {
+		if (!usb->usbdev->ep_in[6])
+			goto allocfail;
 		v_urb_len = 1024;
 		video_pipe = usb_rcvbulkpipe(usb->usbdev, 6);
 	} else {
+		if (!usb->usbdev->ep_in[1])
+			goto allocfail;
 		v_urb_len = 512;
 		video_pipe = usb_rcvbulkpipe(usb->usbdev, 1);
 	}
@@ -1285,6 +1292,8 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	/* Allocate the URBs and buffers for receiving the audio stream */
 	if ((board->flags & GO7007_USB_EZUSB) &&
 	    (board->main_info.flags & GO7007_BOARD_HAS_AUDIO)) {
+		if (!usb->usbdev->ep_in[8])
+			goto allocfail;
 		for (i = 0; i < 8; ++i) {
 			usb->audio_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
 			if (usb->audio_urbs[i] == NULL)
Signature · 1 line
2.25.1
author maintainer
#218 lore raw

PATCH 217/393 media: s5p-g2d: Fix a memory leak in an error handling path in g2d_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 94b9ce6870f9c90ac92505482689818b254312f7 ]

Memory allocated with 'v4l2_m2m_init()' must be freed by a corresponding call to 'v4l2_m2m_release()'

Also reorder the code at the end of the probe function so that 'video_register_device()' is called last.
Update the error handling path accordingly.

Fixes 5ce60d790a24 ("[media] s5p-g2d: Add DT based discovery support")
Fixes 918847341af0 ("[media] v4l: add G2D driver for s5p device family")
[[email protected]: checkpatch: align with parenthesis]
---
 drivers/media/platform/s5p-g2d/g2d.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)
drivers/media/platform/s5p-g2d/g2d.c +15 -13
index 6932fd47071b0..15bcb7f6e113c 100644
@@ -695,21 +695,13 @@ static int g2d_probe(struct platform_device *pdev)
 	vfd->lock = &dev->mutex;
 	vfd->v4l2_dev = &dev->v4l2_dev;
 	vfd->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING;
-	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
-	if (ret) {
-		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
-		goto rel_vdev;
-	}
-	video_set_drvdata(vfd, dev);
-	dev->vfd = vfd;
-	v4l2_info(&dev->v4l2_dev, "device registered as /dev/video%d\n",
-								vfd->num);
+
 	platform_set_drvdata(pdev, dev);
 	dev->m2m_dev = v4l2_m2m_init(&g2d_m2m_ops);
 	if (IS_ERR(dev->m2m_dev)) {
 		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n");
 		ret = PTR_ERR(dev->m2m_dev);
-		goto unreg_video_dev;
+		goto rel_vdev;
 	}
 
 	def_frame.stride = (def_frame.width * def_frame.fmt->depth) >> 3;
@@ -717,14 +709,24 @@ static int g2d_probe(struct platform_device *pdev)
 	of_id = of_match_node(exynos_g2d_match, pdev->dev.of_node);
 	if (!of_id) {
 		ret = -ENODEV;
-		goto unreg_video_dev;
+		goto free_m2m;
 	}
 	dev->variant = (struct g2d_variant *)of_id->data;
 
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+		goto free_m2m;
+	}
+	video_set_drvdata(vfd, dev);
+	dev->vfd = vfd;
+	v4l2_info(&dev->v4l2_dev, "device registered as /dev/video%d\n",
+		  vfd->num);
+
 	return 0;
 
-unreg_video_dev:
-	video_unregister_device(dev->vfd);
+free_m2m:
+	v4l2_m2m_release(dev->m2m_dev);
 rel_vdev:
 	video_device_release(vfd);
 unreg_v4l2_dev:
Signature · 1 line
2.25.1
author maintainer
#219 lore raw

PATCH 218/393 phy: renesas: rcar-gen3-usb2: move irq registration to init

In reply to Greg Kroah-Hartman

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit 08b0ad375ca66181faee725b1b358bcae8d592ee ]

If CONFIG_DEBUG_SHIRQ was enabled, r8a77951-salvator-xs could boot correctly. If we appended "earlycon keep_bootcon" to the kernel command like, we could get kernel log like below.

    SError Interrupt on CPU0, code 0xbf000002 -- SError
    CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-salvator-x-00505-g6c843129e6faaf01 #785
    Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
    pstate: 60400085 (nZCv daIf +PAN -UAO BTYPE=--)
    pc : rcar_gen3_phy_usb2_irq+0x14/0x54
    lr : free_irq+0xf4/0x27c

This means free_irq() calls the interrupt handler while PM runtime is not getting if DEBUG_SHIRQ is enabled and rcar_gen3_phy_usb2_probe() failed. To fix the issue, move the irq registration place to rcar_gen3_phy_usb2_init() which is ready to handle the interrupts.

Note that after the commit 549b6b55b005 ("phy: renesas: rcar-gen3-usb2:
enable/disable independent irqs") which is merged into v5.2, since this driver creates multiple phy instances, needs to check whether one of phy instances is initialized. However, if we backport this patch to v5.1 or less, we don't need to check it because such kernel have single phy instance.

---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 61 +++++++++++++-----------
 1 file changed, 33 insertions(+), 28 deletions(-)
drivers/phy/renesas/phy-rcar-gen3-usb2.c +33 -28
index bfb22f868857f..5087b7c44d55b 100644
@@ -111,6 +111,7 @@ struct rcar_gen3_chan {
 	struct work_struct work;
 	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
+	int irq;
 	bool extcon_host;
 	bool is_otg_channel;
 	bool uses_otg_pins;
@@ -389,12 +390,38 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 	rcar_gen3_device_recognition(ch);
 }
 
+static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
+{
+	struct rcar_gen3_chan *ch = _ch;
+	void __iomem *usb2_base = ch->base;
+	u32 status = readl(usb2_base + USB2_OBINTSTA);
+	irqreturn_t ret = IRQ_NONE;
+
+	if (status & USB2_OBINT_BITS) {
+		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
+		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+		rcar_gen3_device_recognition(ch);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
 static int rcar_gen3_phy_usb2_init(struct phy *p)
 {
 	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
 	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
 	u32 val;
+	int ret;
+
+	if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) {
+		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
+		ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq,
+				  IRQF_SHARED, dev_name(channel->dev), channel);
+		if (ret < 0)
+			dev_err(channel->dev, "No irq handler (%d)\n", channel->irq);
+	}
 
 	/* Initialize USB2 part */
 	val = readl(usb2_base + USB2_INT_ENABLE);
@@ -433,6 +460,9 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
 		val &= ~USB2_INT_ENABLE_UCOM_INTEN;
 	writel(val, usb2_base + USB2_INT_ENABLE);
 
+	if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel))
+		free_irq(channel->irq, channel);
+
 	return 0;
 }
 
@@ -503,23 +533,6 @@ static const struct phy_ops rz_g1c_phy_usb2_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
-{
-	struct rcar_gen3_chan *ch = _ch;
-	void __iomem *usb2_base = ch->base;
-	u32 status = readl(usb2_base + USB2_OBINTSTA);
-	irqreturn_t ret = IRQ_NONE;
-
-	if (status & USB2_OBINT_BITS) {
-		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
-		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
-		rcar_gen3_device_recognition(ch);
-		ret = IRQ_HANDLED;
-	}
-
-	return ret;
-}
-
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{
 		.compatible = "renesas,usb2-phy-r8a77470",
@@ -598,7 +611,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	struct phy_provider *provider;
 	struct resource *res;
 	const struct phy_ops *phy_usb2_ops;
-	int irq, ret = 0, i;
+	int ret = 0, i;
 
 	if (!dev->of_node) {
 		dev_err(dev, "This driver needs device tree\n");
@@ -614,16 +627,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(channel->base))
 		return PTR_ERR(channel->base);
 
-	/* call request_irq for OTG */
-	irq = platform_get_irq_optional(pdev, 0);
-	if (irq >= 0) {
-		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
-		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
-				       IRQF_SHARED, dev_name(dev), channel);
-		if (irq < 0)
-			dev_err(dev, "No irq handler (%d)\n", irq);
-	}
-
+	/* get irq number here and request_irq for OTG in phy_init */
+	channel->irq = platform_get_irq_optional(pdev, 0);
 	channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
 	if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
 		int ret;
Signature · 1 line
2.25.1
author maintainer
#220 lore raw

PATCH 219/393 powerpc/book3s64/pkeys: Use PVR check instead of cpu feature

In reply to Greg Kroah-Hartman

From: Aneesh Kumar K.V <[email protected]>

[ Upstream commit d79e7a5f26f1d179cbb915a8bf2469b6d7431c29 ]

We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should use PVR value. Now considering we are using CPU_FTRS_POWER8, that implies we returned true for P9 with older firmware. Keep the same behavior by checking for P9 PVR value.

---
 arch/powerpc/mm/book3s64/pkeys.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
arch/powerpc/mm/book3s64/pkeys.c +10 -6
index 268ce9581676a..fa237c8c161f7 100644
@@ -83,13 +83,17 @@ static int pkey_initialize(void)
 	scan_pkey_feature();
 
 	/*
-	 * Let's assume 32 pkeys on P8 bare metal, if its not defined by device
-	 * tree. We make this exception since skiboot forgot to expose this
-	 * property on power8.
+	 * Let's assume 32 pkeys on P8/P9 bare metal, if its not defined by device
+	 * tree. We make this exception since some version of skiboot forgot to
+	 * expose this property on power8/9.
 	 */
-	if (!pkeys_devtree_defined && !firmware_has_feature(FW_FEATURE_LPAR) &&
-			cpu_has_feature(CPU_FTRS_POWER8))
-		pkeys_total = 32;
+	if (!pkeys_devtree_defined && !firmware_has_feature(FW_FEATURE_LPAR)) {
+		unsigned long pvr = mfspr(SPRN_PVR);
+
+		if (PVR_VER(pvr) == PVR_POWER8 || PVR_VER(pvr) == PVR_POWER8E ||
+		    PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9)
+			pkeys_total = 32;
+	}
 
 	/*
 	 * Adjust the upper limit, based on the number of bits supported by
Signature · 1 line
2.25.1
author maintainer
#221 lore raw

PATCH 220/393 drm/imx: fix use after free

In reply to Greg Kroah-Hartman

From: Philipp Zabel <[email protected]>

[ Upstream commit ba807c94f67fd64b3051199810d9e4dd209fdc00 ]

Component driver structures allocated with devm_kmalloc() in bind() are freed automatically after unbind(). Since the contained drm structures are accessed afterwards in drm_mode_config_cleanup(), move the allocation into probe() to extend the driver structure's lifetime to the lifetime of the device. This should eventually be changed to use drm resource managed allocations with lifetime of the drm device.

We also need to ensure that all componets are available during the unbind() so we need to call component_unbind_all() before we free non-devres resources like planes.

Note this patch fixes the the use after free bug but introduces a possible boot loop issue. The issue is triggered if the HDMI support is enabled and a component driver always return -EPROBE_DEFER, see discussion [1] for more details.

[1] https://lkml.org/lkml/2020/3/24/1467

Fixes 17b5001b5143 ("imx-drm: convert to componentised device support")
[m.felsch@pengutronix: fix imx_tve_probe()]

[m.felsch@pengutronix: resort component_unbind_all())

[m.felsch@pengutronix: adapt commit message]
---
 drivers/gpu/drm/imx/dw_hdmi-imx.c      | 15 ++++++++++-----
 drivers/gpu/drm/imx/imx-drm-core.c     |  3 ++-
 drivers/gpu/drm/imx/imx-ldb.c          | 15 ++++++++++-----
 drivers/gpu/drm/imx/imx-tve.c          | 15 ++++++++++-----
 drivers/gpu/drm/imx/ipuv3-crtc.c       | 21 ++++++++++-----------
 drivers/gpu/drm/imx/parallel-display.c | 15 ++++++++++-----
 6 files changed, 52 insertions(+), 32 deletions(-)
drivers/gpu/drm/imx/dw_hdmi-imx.c +10 -5
index f22cfbf9353ed..2e12a4a3bfa11 100644
@@ -212,9 +212,8 @@ static int dw_hdmi_imx_bind(struct device *dev, struct device *master,
 	if (!pdev->dev.of_node)
 		return -ENODEV;
 
-	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
-	if (!hdmi)
-		return -ENOMEM;
+	hdmi = dev_get_drvdata(dev);
+	memset(hdmi, 0, sizeof(*hdmi));
 
 	match = of_match_node(dw_hdmi_imx_dt_ids, pdev->dev.of_node);
 	plat_data = match->data;
@@ -239,8 +238,6 @@ static int dw_hdmi_imx_bind(struct device *dev, struct device *master,
 	drm_encoder_init(drm, encoder, &dw_hdmi_imx_encoder_funcs,
 			 DRM_MODE_ENCODER_TMDS, NULL);
 
-	platform_set_drvdata(pdev, hdmi);
-
 	hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data);
 
 	/*
@@ -270,6 +267,14 @@ static const struct component_ops dw_hdmi_imx_ops = {
 
 static int dw_hdmi_imx_probe(struct platform_device *pdev)
 {
+	struct imx_hdmi *hdmi;
+
+	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, hdmi);
+
 	return component_add(&pdev->dev, &dw_hdmi_imx_ops);
 }
 
drivers/gpu/drm/imx/imx-drm-core.c +2 -1
index da87c70e413b4..881c36d0f16bb 100644
@@ -281,9 +281,10 @@ static void imx_drm_unbind(struct device *dev)
 
 	drm_kms_helper_poll_fini(drm);
 
+	component_unbind_all(drm->dev, drm);
+
 	drm_mode_config_cleanup(drm);
 
-	component_unbind_all(drm->dev, drm);
 	dev_set_drvdata(dev, NULL);
 
 	drm_dev_put(drm);
drivers/gpu/drm/imx/imx-ldb.c +10 -5
index 4da22a94790cf..8e209117b049a 100644
@@ -594,9 +594,8 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 	int ret;
 	int i;
 
-	imx_ldb = devm_kzalloc(dev, sizeof(*imx_ldb), GFP_KERNEL);
-	if (!imx_ldb)
-		return -ENOMEM;
+	imx_ldb = dev_get_drvdata(dev);
+	memset(imx_ldb, 0, sizeof(*imx_ldb));
 
 	imx_ldb->regmap = syscon_regmap_lookup_by_phandle(np, "gpr");
 	if (IS_ERR(imx_ldb->regmap)) {
@@ -704,8 +703,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		}
 	}
 
-	dev_set_drvdata(dev, imx_ldb);
-
 	return 0;
 
 free_child:
@@ -737,6 +734,14 @@ static const struct component_ops imx_ldb_ops = {
 
 static int imx_ldb_probe(struct platform_device *pdev)
 {
+	struct imx_ldb *imx_ldb;
+
+	imx_ldb = devm_kzalloc(&pdev->dev, sizeof(*imx_ldb), GFP_KERNEL);
+	if (!imx_ldb)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, imx_ldb);
+
 	return component_add(&pdev->dev, &imx_ldb_ops);
 }
 
drivers/gpu/drm/imx/imx-tve.c +10 -5
index 5bbfaa2cd0f47..9fd4b464e829c 100644
@@ -546,9 +546,8 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 	int irq;
 	int ret;
 
-	tve = devm_kzalloc(dev, sizeof(*tve), GFP_KERNEL);
-	if (!tve)
-		return -ENOMEM;
+	tve = dev_get_drvdata(dev);
+	memset(tve, 0, sizeof(*tve));
 
 	tve->dev = dev;
 	spin_lock_init(&tve->lock);
@@ -659,8 +658,6 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 	if (ret)
 		return ret;
 
-	dev_set_drvdata(dev, tve);
-
 	return 0;
 }
 
@@ -680,6 +677,14 @@ static const struct component_ops imx_tve_ops = {
 
 static int imx_tve_probe(struct platform_device *pdev)
 {
+	struct imx_tve *tve;
+
+	tve = devm_kzalloc(&pdev->dev, sizeof(*tve), GFP_KERNEL);
+	if (!tve)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, tve);
+
 	return component_add(&pdev->dev, &imx_tve_ops);
 }
 
drivers/gpu/drm/imx/ipuv3-crtc.c +10 -11
index 63c0284f8b3c0..2256c9789fc2c 100644
@@ -438,21 +438,13 @@ static int ipu_drm_bind(struct device *dev, struct device *master, void *data)
 	struct ipu_client_platformdata *pdata = dev->platform_data;
 	struct drm_device *drm = data;
 	struct ipu_crtc *ipu_crtc;
-	int ret;
 
-	ipu_crtc = devm_kzalloc(dev, sizeof(*ipu_crtc), GFP_KERNEL);
-	if (!ipu_crtc)
-		return -ENOMEM;
+	ipu_crtc = dev_get_drvdata(dev);
+	memset(ipu_crtc, 0, sizeof(*ipu_crtc));
 
 	ipu_crtc->dev = dev;
 
-	ret = ipu_crtc_init(ipu_crtc, pdata, drm);
-	if (ret)
-		return ret;
-
-	dev_set_drvdata(dev, ipu_crtc);
-
-	return 0;
+	return ipu_crtc_init(ipu_crtc, pdata, drm);
 }
 
 static void ipu_drm_unbind(struct device *dev, struct device *master,
@@ -474,6 +466,7 @@ static const struct component_ops ipu_crtc_ops = {
 static int ipu_drm_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct ipu_crtc *ipu_crtc;
 	int ret;
 
 	if (!dev->platform_data)
@@ -483,6 +476,12 @@ static int ipu_drm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ipu_crtc = devm_kzalloc(dev, sizeof(*ipu_crtc), GFP_KERNEL);
+	if (!ipu_crtc)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, ipu_crtc);
+
 	return component_add(dev, &ipu_crtc_ops);
 }
 
drivers/gpu/drm/imx/parallel-display.c +10 -5
index 08fafa4bf8c21..43e109d67fe30 100644
@@ -330,9 +330,8 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
 	u32 bus_format = 0;
 	const char *fmt;
 
-	imxpd = devm_kzalloc(dev, sizeof(*imxpd), GFP_KERNEL);
-	if (!imxpd)
-		return -ENOMEM;
+	imxpd = dev_get_drvdata(dev);
+	memset(imxpd, 0, sizeof(*imxpd));
 
 	edidp = of_get_property(np, "edid", &imxpd->edid_len);
 	if (edidp)
@@ -363,8 +362,6 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
 	if (ret)
 		return ret;
 
-	dev_set_drvdata(dev, imxpd);
-
 	return 0;
 }
 
@@ -386,6 +383,14 @@ static const struct component_ops imx_pd_ops = {
 
 static int imx_pd_probe(struct platform_device *pdev)
 {
+	struct imx_parallel_display *imxpd;
+
+	imxpd = devm_kzalloc(&pdev->dev, sizeof(*imxpd), GFP_KERNEL);
+	if (!imxpd)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, imxpd);
+
 	return component_add(&pdev->dev, &imx_pd_ops);
 }
 
Signature · 1 line
2.25.1
author maintainer
#222 lore raw

PATCH 221/393 drm/imx: tve: fix regulator_disable error path

In reply to Greg Kroah-Hartman

From: Marco Felsch <[email protected]>

[ Upstream commit 7bb58b987fee26da2a1665c01033022624986b7c ]

Add missing regulator_disable() as devm_action to avoid dedicated unbind() callback and fix the missing error handling.

Fixes fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
---
 drivers/gpu/drm/imx/imx-tve.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/imx/imx-tve.c +10 -10
index 9fd4b464e829c..f91c3eb7697bc 100644
@@ -494,6 +494,13 @@ static int imx_tve_register(struct drm_device *drm, struct imx_tve *tve)
 	return 0;
 }
 
+static void imx_tve_disable_regulator(void *data)
+{
+	struct imx_tve *tve = data;
+
+	regulator_disable(tve->dac_reg);
+}
+
 static bool imx_tve_readable_reg(struct device *dev, unsigned int reg)
 {
 	return (reg % 4 == 0) && (reg <= 0xdc);
@@ -617,6 +624,9 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 		ret = regulator_enable(tve->dac_reg);
 		if (ret)
 			return ret;
+		ret = devm_add_action_or_reset(dev, imx_tve_disable_regulator, tve);
+		if (ret)
+			return ret;
 	}
 
 	tve->clk = devm_clk_get(dev, "tve");
@@ -661,18 +671,8 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 	return 0;
 }
 
-static void imx_tve_unbind(struct device *dev, struct device *master,
-	void *data)
-{
-	struct imx_tve *tve = dev_get_drvdata(dev);
-
-	if (!IS_ERR(tve->dac_reg))
-		regulator_disable(tve->dac_reg);
-}
-
 static const struct component_ops imx_tve_ops = {
 	.bind	= imx_tve_bind,
-	.unbind	= imx_tve_unbind,
 };
 
 static int imx_tve_probe(struct platform_device *pdev)
Signature · 1 line
2.25.1
author maintainer
#223 lore raw

PATCH 222/393 gpu: ipu-v3: Restore RGB32, BGR32

In reply to Greg Kroah-Hartman

From: Steve Longerbeam <[email protected]>

[ Upstream commit 22b2cfad752d4b278ea7c38c0ee961ca50198ce8 ]

RGB32 and BGR32 formats were inadvertently removed from the switch statement in ipu_pixelformat_to_colorspace(). Restore them.

Fixes a59957172b0c ("gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formats")
---
 drivers/gpu/ipu-v3/ipu-common.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/ipu-v3/ipu-common.c +2 -0
index ee2a025e54cfe..b3dae9ec1a38b 100644
@@ -124,6 +124,8 @@ enum ipu_color_space ipu_pixelformat_to_colorspace(u32 pixelformat)
 	case V4L2_PIX_FMT_RGBX32:
 	case V4L2_PIX_FMT_ARGB32:
 	case V4L2_PIX_FMT_XRGB32:
+	case V4L2_PIX_FMT_RGB32:
+	case V4L2_PIX_FMT_BGR32:
 		return IPUV3_COLORSPACE_RGB;
 	default:
 		return IPUV3_COLORSPACE_UNKNOWN;
Signature · 1 line
2.25.1
author maintainer
#224 lore raw

PATCH 223/393 spi: lantiq-ssc: Fix warning by using WQ_MEM_RECLAIM

In reply to Greg Kroah-Hartman

From: Hauke Mehrtens <[email protected]>

[ Upstream commit ba3548cf29616b58c93bbaffc3d636898d009858 ]

The lantiq-ssc driver uses internally an own workqueue to wait till the data is not only written out of the FIFO but really written to the wire. This workqueue is flushed while the SPI subsystem is working in some other system workqueue.

The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag too to prevent this warning.

This fixes the following warning:

[    2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184
[    2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0
Fixes 891b7c5fbf61 ("mtd_blkdevs: convert to blk-mq")
---
 drivers/spi/spi-lantiq-ssc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-lantiq-ssc.c +1 -1
index 44600fb71c484..049a64451c750 100644
@@ -909,7 +909,7 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) |
 				     SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
 
-	spi->wq = alloc_ordered_workqueue(dev_name(dev), 0);
+	spi->wq = alloc_ordered_workqueue(dev_name(dev), WQ_MEM_RECLAIM);
 	if (!spi->wq) {
 		err = -ENOMEM;
 		goto err_clk_put;
Signature · 1 line
2.25.1
author maintainer
#225 lore raw

PATCH 224/393 USB: serial: iuu_phoenix: fix led-activity helpers

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

[ Upstream commit de37458f8c2bfc465500a1dd0d15dbe96d2a698c ]

The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()).

The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode.

In xmas mode, a related off-by-one error left the frequency field uninitialised.

---
 drivers/usb/serial/iuu_phoenix.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/usb/serial/iuu_phoenix.c +8 -6
index b8dfeb4fb2ed6..ffbb2a8901b2b 100644
@@ -353,10 +353,11 @@ static void iuu_led_activity_on(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	*buf_ptr++ = IUU_SET_LED;
+
 	if (xmas) {
-		get_random_bytes(buf_ptr, 6);
-		*(buf_ptr+7) = 1;
+		buf_ptr[0] = IUU_SET_LED;
+		get_random_bytes(buf_ptr + 1, 6);
+		buf_ptr[7] = 1;
 	} else {
 		iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255);
 	}
@@ -374,13 +375,14 @@ static void iuu_led_activity_off(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
+
 	if (xmas) {
 		iuu_rxcmd(urb);
 		return;
-	} else {
-		*buf_ptr++ = IUU_SET_LED;
-		iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
 	}
+
+	iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
+
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			  usb_sndbulkpipe(port->serial->dev,
 					  port->bulk_out_endpointAddress),
Signature · 1 line
2.25.1
author maintainer
#226 lore raw

PATCH 225/393 clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845

In reply to Greg Kroah-Hartman

From: Taniya Das <[email protected]>

[ Upstream commit 9c3df2b1993da9ab1110702d7b2815d5cd8c02f3 ]

The display gpll0 branch clock inside GCC needs to always be enabled. Otherwise the AHB clk (disp_cc_mdss_ahb_clk_src) for the display clk controller (dispcc) will stop clocking while sourcing from gpll0 when this branch inside GCC is turned off during unused clk disabling. We can never turn this branch off because the AHB clk for the display subsystem is needed to read/write any registers inside the display subsystem including clk related ones. This makes this branch a really easy way to turn off AHB access to the display subsystem and cause all sorts of mayhem. Let's just make the clk ops keep the clk enabled forever and ignore any attempts to disable this clk so that dispcc accesses keep working.

Fixes 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Fixes 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
[[email protected]: Fill out commit text more]
---
 drivers/clk/qcom/gcc-sc7180.c | 2 +-
 drivers/clk/qcom/gcc-sdm845.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/clk/qcom/gcc-sc7180.c +1 -1
index 73380525cb091..b3704b685cca3 100644
@@ -1041,7 +1041,7 @@ static struct clk_branch gcc_disp_gpll0_clk_src = {
 				.hw = &gpll0.clkr.hw,
 			},
 			.num_parents = 1,
-			.ops = &clk_branch2_ops,
+			.ops = &clk_branch2_aon_ops,
 		},
 	},
 };
drivers/clk/qcom/gcc-sdm845.c +2 -2
index f6ce888098be9..90f7febaf5288 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/kernel.h>
@@ -1344,7 +1344,7 @@ static struct clk_branch gcc_disp_gpll0_clk_src = {
 				"gpll0",
 			},
 			.num_parents = 1,
-			.ops = &clk_branch2_ops,
+			.ops = &clk_branch2_aon_ops,
 		},
 	},
 };
Signature · 1 line
2.25.1
author maintainer
#227 lore raw

PATCH 226/393 usb: core: fix quirks_param_set() writing to a const pointer

In reply to Greg Kroah-Hartman

From: Kars Mulder <[email protected]>

[ Upstream commit b1b6bed3b5036509b449b5965285d5057ba42527 ]

The function quirks_param_set() takes as argument a const char* pointer to the new value of the usbcore.quirks parameter. It then casts this pointer to a non-const char* pointer and passes it to the strsep() function, which overwrites the value.

Fix this by creating a copy of the value using kstrdup() and letting that copy be written to by strsep().

Fixes 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore")
---
 drivers/usb/core/quirks.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/usb/core/quirks.c +12 -4
index e0b77674869ce..c96c50faccf72 100644
@@ -25,17 +25,23 @@ static unsigned int quirk_count;
 
 static char quirks_param[128];
 
-static int quirks_param_set(const char *val, const struct kernel_param *kp)
+static int quirks_param_set(const char *value, const struct kernel_param *kp)
 {
-	char *p, *field;
+	char *val, *p, *field;
 	u16 vid, pid;
 	u32 flags;
 	size_t i;
 	int err;
 
+	val = kstrdup(value, GFP_KERNEL);
+	if (!val)
+		return -ENOMEM;
+
 	err = param_set_copystring(val, kp);
-	if (err)
+	if (err) {
+		kfree(val);
 		return err;
+	}
 
 	mutex_lock(&quirk_mutex);
 
@@ -60,10 +66,11 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp)
 	if (!quirk_list) {
 		quirk_count = 0;
 		mutex_unlock(&quirk_mutex);
+		kfree(val);
 		return -ENOMEM;
 	}
 
-	for (i = 0, p = (char *)val; p && *p;) {
+	for (i = 0, p = val; p && *p;) {
 		/* Each entry consists of VID:PID:flags */
 		field = strsep(&p, ":");
 		if (!field)
@@ -144,6 +151,7 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp)
 
 unlock:
 	mutex_unlock(&quirk_mutex);
+	kfree(val);
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#228 lore raw

PATCH 227/393 thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 0f348db01fdf128813fdd659fcc339038fb421a4 ]

This condition is reversed and will cause breakage.

Fixes 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR")
---
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/ti-soc-thermal/ti-thermal-common.c +1 -1
index 85776db4bf346..2ce4b19f312ac 100644
@@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	if (!IS_ERR_OR_NULL(data))
+	if (IS_ERR_OR_NULL(data))
 		data = ti_thermal_build_data(bgp, id);
 
 	if (!data)
Signature · 1 line
2.25.1
author maintainer
#229 lore raw

PATCH 228/393 coresight: etmv4: Fix resource selector constant

In reply to Greg Kroah-Hartman

From: Mike Leach <[email protected]>

[ Upstream commit cb8bba907a4ff4ba42f1d245cb506d55829674b8 ]

ETMv4 max resource selector constant incorrectly set to 16. Updated to the correct 32 value, and adjustments made to limited code using it.

Fixes 2e1cdfe184b52 ("coresight-etm4x: Adding CoreSight ETM4x driver")
---
 drivers/hwtracing/coresight/coresight-etm4x.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/hwtracing/coresight/coresight-etm4x.h +2 -2
index 4a695bf90582e..b0d633daf7162 100644
@@ -133,7 +133,7 @@
 #define ETMv4_MAX_CTXID_CMP		8
 #define ETM_MAX_VMID_CMP		8
 #define ETM_MAX_PE_CMP			8
-#define ETM_MAX_RES_SEL			16
+#define ETM_MAX_RES_SEL			32
 #define ETM_MAX_SS_CMP			8
 
 #define ETM_ARCH_V4			0x40
@@ -325,7 +325,7 @@ struct etmv4_save_state {
 	u32	trccntctlr[ETMv4_MAX_CNTR];
 	u32	trccntvr[ETMv4_MAX_CNTR];
 
-	u32	trcrsctlr[ETM_MAX_RES_SEL * 2];
+	u32	trcrsctlr[ETM_MAX_RES_SEL];
 
 	u32	trcssccr[ETM_MAX_SS_CMP];
 	u32	trcsscsr[ETM_MAX_SS_CMP];
Signature · 1 line
2.25.1
author maintainer
#230 lore raw

PATCH 229/393 coresight: etmv4: Counter values not saved on disable

In reply to Greg Kroah-Hartman

From: Mike Leach <[email protected]>

[ Upstream commit 8fa43700f69703f995ea715b76be6fabdd2f05de ]

The counter value registers change during operation, however this change is not reflected in the values seen by the user in sysfs.

This fixes the issue by reading back the values on disable.

Fixes 2e1cdfe184b52 ("coresight-etm4x: Adding CoreSight ETM4x driver")
---
 drivers/hwtracing/coresight/coresight-etm4x.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/hwtracing/coresight/coresight-etm4x.c +6 -0
index d59e4b1e5ce58..942b362a1f220 100644
@@ -507,6 +507,12 @@ static void etm4_disable_hw(void *info)
 			readl_relaxed(drvdata->base + TRCSSCSRn(i));
 	}
 
+	/* read back the current counter values */
+	for (i = 0; i < drvdata->nr_cntr; i++) {
+		config->cntr_val[i] =
+			readl_relaxed(drvdata->base + TRCCNTVRn(i));
+	}
+
 	coresight_disclaim_device_unlocked(drvdata->base);
 
 	CS_LOCK(drvdata->base);
Signature · 1 line
2.25.1
author maintainer
#231 lore raw

PATCH 230/393 coresight: tmc: Fix TMC mode read in tmc_read_unprepare_etb()

In reply to Greg Kroah-Hartman

From: Sai Prakash Ranjan <[email protected]>

[ Upstream commit d021f5c5ff679432c5e9faee0fd7350db2efb97c ]

Reading TMC mode register without proper coresight power management can lead to exceptions like the one in the call trace below in tmc_read_unprepare_etb() when the trace data is read after the sink is disabled. So fix this by having a check for coresight sysfs mode before reading TMC mode management register in tmc_read_unprepare_etb() similar to tmc_read_prepare_etb().

SError Interrupt on CPU6, code 0xbe000411 -- SError
pstate: 80400089 (Nzcv daIf +PAN -UAO)

  pc : tmc_read_unprepare_etb+0x74/0x108
  lr : tmc_read_unprepare_etb+0x54/0x108
  sp : ffffff80d9507c30
  x29: ffffff80d9507c30 x28: ffffff80b3569a0c
  x27: 0000000000000000 x26: 00000000000a0001
  x25: ffffff80cbae9550 x24: 0000000000000010
  x23: ffffffd07296b0f0 x22: ffffffd0109ee028
  x21: 0000000000000000 x20: ffffff80d19e70e0
  x19: ffffff80d19e7080 x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: 0000000000000000
  x13: 0000000000000000 x12: 0000000000000000
  x11: 0000000000000000 x10: dfffffd000000001
  x9 : 0000000000000000 x8 : 0000000000000002
  x7 : ffffffd071d0fe78 x6 : 0000000000000000
  x5 : 0000000000000080 x4 : 0000000000000001
  x3 : ffffffd071d0fe98 x2 : 0000000000000000
  x1 : 0000000000000004 x0 : 0000000000000001
  Kernel panic - not syncing: Asynchronous SError Interrupt
---
 drivers/hwtracing/coresight/coresight-tmc-etf.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/hwtracing/coresight/coresight-tmc-etf.c +6 -7
index 36cce2bfb7449..6375504ba8b00 100644
@@ -639,15 +639,14 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
 
 	spin_lock_irqsave(&drvdata->spinlock, flags);
 
-	/* There is no point in reading a TMC in HW FIFO mode */
-	mode = readl_relaxed(drvdata->base + TMC_MODE);
-	if (mode != TMC_MODE_CIRCULAR_BUFFER) {
-		spin_unlock_irqrestore(&drvdata->spinlock, flags);
-		return -EINVAL;
-	}
-
 	/* Re-enable the TMC if need be */
 	if (drvdata->mode == CS_MODE_SYSFS) {
+		/* There is no point in reading a TMC in HW FIFO mode */
+		mode = readl_relaxed(drvdata->base + TMC_MODE);
+		if (mode != TMC_MODE_CIRCULAR_BUFFER) {
+			spin_unlock_irqrestore(&drvdata->spinlock, flags);
+			return -EINVAL;
+		}
 		/*
 		 * The trace run will continue with the same allocated trace
 		 * buffer. As such zero-out the buffer so that we don't end
Signature · 1 line
2.25.1
author maintainer
#232 lore raw

PATCH 231/393 coresight: etm4x: Fix save/restore during cpu idle

In reply to Greg Kroah-Hartman

From: Suzuki K Poulose <[email protected]>

[ Upstream commit 342c8a1d1d9e418d32fa02d635cf96989f9a986e ]

The ETM state save/restore incorrectly reads/writes some of the 64bit registers (e.g, address comparators, vmid/cid comparators etc.) using 32bit accesses. Ensure we use the appropriate width accessors for the registers.

Fixes f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Cc Mathieu Poirier <[email protected]>
Cc Mike Leach <[email protected]>
---
 drivers/hwtracing/coresight/coresight-etm4x.c | 16 ++++++++--------
 drivers/hwtracing/coresight/coresight-etm4x.h |  2 +-
 2 files changed, 9 insertions(+), 9 deletions(-)
drivers/hwtracing/coresight/coresight-etm4x.c +8 -8
index 942b362a1f220..13c362cddd6a6 100644
@@ -1213,8 +1213,8 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
 	}
 
 	for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
-		state->trcacvr[i] = readl(drvdata->base + TRCACVRn(i));
-		state->trcacatr[i] = readl(drvdata->base + TRCACATRn(i));
+		state->trcacvr[i] = readq(drvdata->base + TRCACVRn(i));
+		state->trcacatr[i] = readq(drvdata->base + TRCACATRn(i));
 	}
 
 	/*
@@ -1225,10 +1225,10 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
 	 */
 
 	for (i = 0; i < drvdata->numcidc; i++)
-		state->trccidcvr[i] = readl(drvdata->base + TRCCIDCVRn(i));
+		state->trccidcvr[i] = readq(drvdata->base + TRCCIDCVRn(i));
 
 	for (i = 0; i < drvdata->numvmidc; i++)
-		state->trcvmidcvr[i] = readl(drvdata->base + TRCVMIDCVRn(i));
+		state->trcvmidcvr[i] = readq(drvdata->base + TRCVMIDCVRn(i));
 
 	state->trccidcctlr0 = readl(drvdata->base + TRCCIDCCTLR0);
 	state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1);
@@ -1326,18 +1326,18 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata)
 	}
 
 	for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
-		writel_relaxed(state->trcacvr[i],
+		writeq_relaxed(state->trcacvr[i],
 			       drvdata->base + TRCACVRn(i));
-		writel_relaxed(state->trcacatr[i],
+		writeq_relaxed(state->trcacatr[i],
 			       drvdata->base + TRCACATRn(i));
 	}
 
 	for (i = 0; i < drvdata->numcidc; i++)
-		writel_relaxed(state->trccidcvr[i],
+		writeq_relaxed(state->trccidcvr[i],
 			       drvdata->base + TRCCIDCVRn(i));
 
 	for (i = 0; i < drvdata->numvmidc; i++)
-		writel_relaxed(state->trcvmidcvr[i],
+		writeq_relaxed(state->trcvmidcvr[i],
 			       drvdata->base + TRCVMIDCVRn(i));
 
 	writel_relaxed(state->trccidcctlr0, drvdata->base + TRCCIDCCTLR0);
drivers/hwtracing/coresight/coresight-etm4x.h +1 -1
index b0d633daf7162..47729e04aac72 100644
@@ -334,7 +334,7 @@ struct etmv4_save_state {
 	u64	trcacvr[ETM_MAX_SINGLE_ADDR_CMP];
 	u64	trcacatr[ETM_MAX_SINGLE_ADDR_CMP];
 	u64	trccidcvr[ETMv4_MAX_CTXID_CMP];
-	u32	trcvmidcvr[ETM_MAX_VMID_CMP];
+	u64	trcvmidcvr[ETM_MAX_VMID_CMP];
 	u32	trccidcctlr0;
 	u32	trccidcctlr1;
 	u32	trcvmidcctlr0;
Signature · 1 line
2.25.1
author maintainer
#233 lore raw

PATCH 232/393 powerpc/perf: Fix missing is_sier_aviable() during build

In reply to Greg Kroah-Hartman

From: Madhavan Srinivasan <[email protected]>

[ Upstream commit 3c9450c053f88e525b2db1e6990cdf34d14e7696 ]

Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'

Currently is_sier_available() is part of core-book3s.c, which is added to build based on CONFIG_PPC_PERF_CTRS.

A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will have a build break because of missing is_sier_available().

In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because that also guards the usage of is_sier_available(). That only happens with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.

Patch adds is_sier_available() in asm/perf_event.h to fix the build break for configs missing CONFIG_PPC_PERF_CTRS.

Fixes 333804dc3b7a ("powerpc/perf: Update perf_regs structure to include SIER")
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
---
 arch/powerpc/include/asm/perf_event.h | 2 ++
 1 file changed, 2 insertions(+)
arch/powerpc/include/asm/perf_event.h +2 -0
index eed3954082fa2..1e8b2e1ec1db6 100644
@@ -12,6 +12,8 @@
 
 #ifdef CONFIG_PPC_PERF_CTRS
 #include <asm/perf_event_server.h>
+#else
+static inline bool is_sier_available(void) { return false; }
 #endif
 
 #ifdef CONFIG_FSL_EMB_PERF_EVENT
Signature · 1 line
2.25.1
author maintainer
#234 lore raw

PATCH 233/393 mt76: mt7615: fix potential memory leak in mcu message handler

In reply to Greg Kroah-Hartman

From: Sean Wang <[email protected]>

[ Upstream commit 9248c08c3fc4ef816c82aa49d01123f4746d349f ]

Fix potential memory leak in mcu message handler on error condition.

Fixes 0e6a29e477f3 ("mt76: mt7615: add support to read temperature from mcu")
---
 drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +5 -2
index 29a7aaabb6da1..9c55424962522 100644
@@ -167,8 +167,10 @@ mt7615_mcu_parse_response(struct mt7615_dev *dev, int cmd,
 	struct mt7615_mcu_rxd *rxd = (struct mt7615_mcu_rxd *)skb->data;
 	int ret = 0;
 
-	if (seq != rxd->seq)
-		return -EAGAIN;
+	if (seq != rxd->seq) {
+		ret = -EAGAIN;
+		goto out;
+	}
 
 	switch (cmd) {
 	case MCU_CMD_PATCH_SEM_CONTROL:
@@ -182,6 +184,7 @@ mt7615_mcu_parse_response(struct mt7615_dev *dev, int cmd,
 	default:
 		break;
 	}
+out:
 	dev_kfree_skb(skb);
 
 	return ret;
Signature · 1 line
2.25.1
author maintainer
#235 lore raw

PATCH 234/393 mt76: mt7615: fix possible memory leak in mt7615_mcu_wtbl_sta_add

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit 2bccc8415883c1cd5ae8836548d9783dbbd84999 ]

Free the second mcu skb if __mt76_mcu_skb_send_msg() fails to transmit the first one in mt7615_mcu_wtbl_sta_add().

Fixes 99c457d902cf9 ("mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops")
---
 drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +5 -1
index 9c55424962522..81d6127dc6fd8 100644
@@ -1036,8 +1036,12 @@ mt7615_mcu_wtbl_sta_add(struct mt7615_dev *dev, struct ieee80211_vif *vif,
 	skb = enable ? wskb : sskb;
 
 	err = __mt76_mcu_skb_send_msg(&dev->mt76, skb, cmd, true);
-	if (err < 0)
+	if (err < 0) {
+		skb = enable ? sskb : wskb;
+		dev_kfree_skb(skb);
+
 		return err;
+	}
 
 	cmd = enable ? MCU_EXT_CMD_STA_REC_UPDATE : MCU_EXT_CMD_WTBL_UPDATE;
 	skb = enable ? sskb : wskb;
Signature · 1 line
2.25.1
author maintainer
#236 lore raw

PATCH 235/393 phy: armada-38x: fix NETA lockup when repeatedly switching speeds

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 1dea06cd643da38931382ebdc151efced201ffad ]

The mvneta hardware appears to lock up in various random ways when repeatedly switching speeds between 1G and 2.5G, which involves reprogramming the COMPHY. It is not entirely clear why this happens, but best guess is that reprogramming the COMPHY glitches mvneta clocks causing the hardware to fail. It seems that rebooting resolves the failure, but not down/up cycling the interface alone.

Various other approaches have been tried, such as trying to cleanly power down the COMPHY and then take it back through the power up initialisation, but this does not seem to help.

It was finally noticed that u-boot's last step when configuring a COMPHY for "SGMII" mode was to poke at a register described as "GBE_CONFIGURATION_REG", which is undocumented in any external documentation. All that we have is the fact that u-boot sets a bit corresponding to the "SGMII" lane at the end of COMPHY initialisation.

Experimentation shows that if we clear this bit prior to changing the speed, and then set it afterwards, mvneta does not suffer this problem on the SolidRun Clearfog when switching speeds between 1G and 2.5G.

This problem was found while script-testing phylink.

This fix also requires the corresponding change to DT to be effective. See "ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds".

Fixes 14dc100b4411 ("phy: armada38x: add common phy support")
---
 drivers/phy/marvell/phy-armada38x-comphy.c | 45 ++++++++++++++++++----
 1 file changed, 38 insertions(+), 7 deletions(-)
drivers/phy/marvell/phy-armada38x-comphy.c +38 -7
index 6960dfd8ad8c9..0fe4089643342 100644
@@ -41,6 +41,7 @@ struct a38x_comphy_lane {
 
 struct a38x_comphy {
 	void __iomem *base;
+	void __iomem *conf;
 	struct device *dev;
 	struct a38x_comphy_lane lane[MAX_A38X_COMPHY];
 };
@@ -54,6 +55,21 @@ static const u8 gbe_mux[MAX_A38X_COMPHY][MAX_A38X_PORTS] = {
 	{ 0, 0, 3 },
 };
 
+static void a38x_set_conf(struct a38x_comphy_lane *lane, bool enable)
+{
+	struct a38x_comphy *priv = lane->priv;
+	u32 conf;
+
+	if (priv->conf) {
+		conf = readl_relaxed(priv->conf);
+		if (enable)
+			conf |= BIT(lane->port);
+		else
+			conf &= ~BIT(lane->port);
+		writel(conf, priv->conf);
+	}
+}
+
 static void a38x_comphy_set_reg(struct a38x_comphy_lane *lane,
 				unsigned int offset, u32 mask, u32 value)
 {
@@ -97,6 +113,7 @@ static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
 {
 	struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
 	unsigned int gen;
+	int ret;
 
 	if (mode != PHY_MODE_ETHERNET)
 		return -EINVAL;
@@ -115,13 +132,20 @@ static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
 		return -EINVAL;
 	}
 
+	a38x_set_conf(lane, false);
+
 	a38x_comphy_set_speed(lane, gen, gen);
 
-	return a38x_comphy_poll(lane, COMPHY_STAT1,
-				COMPHY_STAT1_PLL_RDY_TX |
-				COMPHY_STAT1_PLL_RDY_RX,
-				COMPHY_STAT1_PLL_RDY_TX |
-				COMPHY_STAT1_PLL_RDY_RX);
+	ret = a38x_comphy_poll(lane, COMPHY_STAT1,
+			       COMPHY_STAT1_PLL_RDY_TX |
+			       COMPHY_STAT1_PLL_RDY_RX,
+			       COMPHY_STAT1_PLL_RDY_TX |
+			       COMPHY_STAT1_PLL_RDY_RX);
+
+	if (ret == 0)
+		a38x_set_conf(lane, true);
+
+	return ret;
 }
 
 static const struct phy_ops a38x_comphy_ops = {
@@ -174,14 +198,21 @@ static int a38x_comphy_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
 	priv->dev = &pdev->dev;
 	priv->base = base;
 
+	/* Optional */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf");
+	if (res) {
+		priv->conf = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(priv->conf))
+			return PTR_ERR(priv->conf);
+	}
+
 	for_each_available_child_of_node(pdev->dev.of_node, child) {
 		struct phy *phy;
 		int ret;
Signature · 1 line
2.25.1
author maintainer
#237 lore raw

PATCH 236/393 s390/bpf: Fix sign extension in branch_ku

In reply to Greg Kroah-Hartman

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 7477d43be5b1448bc0d4c85cb185a0144cc080e1 ]

Both signed and unsigned variants of BPF_JMP | BPF_K require sign-extending the immediate. JIT emits cgfi for the signed case, which is correct, and clgfi for the unsigned case, which is not
correct: clgfi zero-extends the immediate.

s390 does not provide an instruction that does sign-extension and unsigned comparison at the same time. Therefore, fix by first loading the sign-extended immediate into work register REG_1 and proceeding as if it's BPF_X.

---
 arch/s390/net/bpf_jit_comp.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
arch/s390/net/bpf_jit_comp.c +4 -15
index 0f37a1b635f85..ac227ea13cbe7 100644
@@ -1416,21 +1416,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		}
 		break;
 branch_ku:
-		is_jmp32 = BPF_CLASS(insn->code) == BPF_JMP32;
-		/* clfi or clgfi %dst,imm */
-		EMIT6_IMM(is_jmp32 ? 0xc20f0000 : 0xc20e0000,
-			  dst_reg, imm);
-		if (!is_first_pass(jit) &&
-		    can_use_rel(jit, addrs[i + off + 1])) {
-			/* brc mask,off */
-			EMIT4_PCREL_RIC(0xa7040000,
-					mask >> 12, addrs[i + off + 1]);
-		} else {
-			/* brcl mask,off */
-			EMIT6_PCREL_RILC(0xc0040000,
-					 mask >> 12, addrs[i + off + 1]);
-		}
-		break;
+		/* lgfi %w1,imm (load sign extend imm) */
+		src_reg = REG_1;
+		EMIT6_IMM(0xc0010000, src_reg, imm);
+		goto branch_xu;
 branch_xs:
 		is_jmp32 = BPF_CLASS(insn->code) == BPF_JMP32;
 		if (!is_first_pass(jit) &&
Signature · 1 line
2.25.1
author maintainer
#238 lore raw

PATCH 237/393 s390/bpf: Use brcl for jumping to exit_ip if necessary

In reply to Greg Kroah-Hartman

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 5fa6974471c5518a50bdd814067508dbcb477251 ]

"BPF_MAXINSNS: Maximum possible literals" test causes panic with bpf_jit_harden = 2. The reason is that BPF_JMP | BPF_EXIT is always emitted as brc, however, after removal of JITed image size limitations, brcl might be required.

Fix by using brcl when necessary.

---
 arch/s390/net/bpf_jit_comp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
arch/s390/net/bpf_jit_comp.c +6 -2
index ac227ea13cbe7..650b89eb693e6 100644
@@ -1267,8 +1267,12 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		last = (i == fp->len - 1) ? 1 : 0;
 		if (last)
 			break;
-		/* j <exit> */
-		EMIT4_PCREL(0xa7f40000, jit->exit_ip - jit->prg);
+		if (!is_first_pass(jit) && can_use_rel(jit, jit->exit_ip))
+			/* brc 0xf, <exit> */
+			EMIT4_PCREL_RIC(0xa7040000, 0xf, jit->exit_ip);
+		else
+			/* brcl 0xf, <exit> */
+			EMIT6_PCREL_RILC(0xc0040000, 0xf, jit->exit_ip);
 		break;
 	/*
 	 * Branch relative (number of skipped instructions) to offset on
Signature · 1 line
2.25.1
author maintainer
#239 lore raw

PATCH 238/393 s390/bpf: Tolerate not converging code shrinking

In reply to Greg Kroah-Hartman

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 1491b73311a15bb5beeab5d30e03bff761ef6c18 ]

"BPF_MAXINSNS: Maximum possible literals" unnecessarily falls back to the interpreter because of failing sanity check in bpf_set_addr. The problem is that there are a lot of branches that can be shrunk, and doing so opens up the possibility to shrink even more. This process does not converge after 3 passes, causing code offsets to change during the codegen pass, which must never happen.

Fix by inserting nops during codegen pass in order to preserve code offets.

---
 arch/s390/net/bpf_jit_comp.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
arch/s390/net/bpf_jit_comp.c +26 -1
index 650b89eb693e6..95809599ebffd 100644
@@ -489,6 +489,24 @@ static void save_restore_regs(struct bpf_jit *jit, int op, u32 stack_depth)
 	} while (re <= last);
 }
 
+static void bpf_skip(struct bpf_jit *jit, int size)
+{
+	if (size >= 6 && !is_valid_rel(size)) {
+		/* brcl 0xf,size */
+		EMIT6_PCREL_RIL(0xc0f4000000, size);
+		size -= 6;
+	} else if (size >= 4 && is_valid_rel(size)) {
+		/* brc 0xf,size */
+		EMIT4_PCREL(0xa7f40000, size);
+		size -= 4;
+	}
+	while (size >= 2) {
+		/* bcr 0,%0 */
+		_EMIT2(0x0700);
+		size -= 2;
+	}
+}
+
 /*
  * Emit function prologue
  *
@@ -1502,7 +1520,14 @@ static bool bpf_is_new_addr_sane(struct bpf_jit *jit, int i)
  */
 static int bpf_set_addr(struct bpf_jit *jit, int i)
 {
-	if (!bpf_is_new_addr_sane(jit, i))
+	int delta;
+
+	if (is_codegen_pass(jit)) {
+		delta = jit->prg - jit->addrs[i];
+		if (delta < 0)
+			bpf_skip(jit, -delta);
+	}
+	if (WARN_ON_ONCE(!bpf_is_new_addr_sane(jit, i)))
 		return -1;
 	jit->addrs[i] = jit->prg;
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#240 lore raw

PATCH 239/393 tools/bpftool: Fix error handing in do_skeleton()

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 956fcfcd359512f15b19bcd157fa8206ed26605b ]

Fix pass 0 to PTR_ERR, also dump more err info using libbpf_strerror.

Fixes 5dc7a8b21144 ("bpftool, selftests/bpf: Embed object file inside skeleton")
---
 tools/bpf/bpftool/gen.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/bpf/bpftool/gen.c +4 -1
index f5960b48c8615..5ff951e08c740 100644
@@ -307,8 +307,11 @@ static int do_skeleton(int argc, char **argv)
 	opts.object_name = obj_name;
 	obj = bpf_object__open_mem(obj_data, file_sz, &opts);
 	if (IS_ERR(obj)) {
+		char err_buf[256];
+
+		libbpf_strerror(PTR_ERR(obj), err_buf, sizeof(err_buf));
+		p_err("failed to open BPF object file: %s", err_buf);
 		obj = NULL;
-		p_err("failed to open BPF object file: %ld", PTR_ERR(obj));
 		goto out;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#241 lore raw

PATCH 240/393 ASoC: tas2770: Fix reset gpio property name

In reply to Greg Kroah-Hartman

From: Dan Murphy <[email protected]>

[ Upstream commit 58b868f51d6e38146e44cb09fcd92b5fc35d83bc ]

Fix the reset property name when allocating the GPIO descriptor. The gpiod_get_optional appends either the -gpio or -gpios suffix to the name.

Fixes 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
---
 sound/soc/codecs/tas2770.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
sound/soc/codecs/tas2770.c +1 -2
index 54c8135fe43c1..cf071121c8398 100644
@@ -758,8 +758,7 @@ static int tas2770_i2c_probe(struct i2c_client *client,
 		}
 	}
 
-	tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev,
-							  "reset-gpio",
+	tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev, "reset",
 						      GPIOD_OUT_HIGH);
 	if (IS_ERR(tas2770->reset_gpio)) {
 		if (PTR_ERR(tas2770->reset_gpio) == -EPROBE_DEFER) {
Signature · 1 line
2.25.1
author maintainer
#242 lore raw

PATCH 241/393 ASoC: hdac_hda: fix deadlock after PCM open error

In reply to Greg Kroah-Hartman

From: Kai Vehmanen <[email protected]>

[ Upstream commit 06f07e2365378d51eddd0b5bf23506e1237662b0 ]

Commit 5bd70440cb0a ("ASoC: soc-dai: revert all changes to DAI startup/shutdown sequence"), introduced a slight change of semantics to DAI startup/shutdown. If startup() returns an error, shutdown() is now called for the DAI.

This causes a deadlock in hdac_hda which issues a call to snd_hda_codec_pcm_put() in case open fails. Upon error, soc_pcm_open() will call shutdown(), and pcm_put() ends up getting called twice. Result is a deadlock on pcm->open_mutex, as snd_device_free() gets called from within snd_pcm_open(). Typical task backtrace looks like this:

[  334.244627]  snd_pcm_dev_disconnect+0x49/0x340 [snd_pcm]
[  334.244634]  __snd_device_disconnect.part.0+0x2c/0x50 [snd]
[  334.244640]  __snd_device_free+0x7f/0xc0 [snd]
[  334.244650]  snd_hda_codec_pcm_put+0x87/0x120 [snd_hda_codec]
[  334.244660]  soc_pcm_open+0x6a0/0xbe0 [snd_soc_core]
[  334.244676]  ? dpcm_add_paths.isra.0+0x491/0x590 [snd_soc_core]
[  334.244679]  ? kfree+0x9a/0x230
[  334.244686]  dpcm_be_dai_startup+0x255/0x300 [snd_soc_core]
[  334.244695]  dpcm_fe_dai_open+0x20e/0xf30 [snd_soc_core]
[  334.244701]  ? snd_pcm_hw_rule_muldivk+0x110/0x110 [snd_pcm]
[  334.244709]  ? dpcm_be_dai_startup+0x300/0x300 [snd_soc_core]
[  334.244714]  ? snd_pcm_attach_substream+0x3c4/0x540 [snd_pcm]
[  334.244719]  snd_pcm_open_substream+0x69a/0xb60 [snd_pcm]
[  334.244729]  ? snd_pcm_release_substream+0x30/0x30 [snd_pcm]
[  334.244732]  ? __mutex_lock_slowpath+0x10/0x10
[  334.244736]  snd_pcm_open+0x1b3/0x3c0 [snd_pcm]
---
 sound/soc/codecs/hdac_hda.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
sound/soc/codecs/hdac_hda.c +1 -6
index 473efe9ef998a..b0370bb10c142 100644
@@ -289,7 +289,6 @@ static int hdac_hda_dai_open(struct snd_pcm_substream *substream,
 	struct hdac_hda_priv *hda_pvt;
 	struct hda_pcm_stream *hda_stream;
 	struct hda_pcm *pcm;
-	int ret;
 
 	hda_pvt = snd_soc_component_get_drvdata(component);
 	pcm = snd_soc_find_pcm_from_dai(hda_pvt, dai);
@@ -300,11 +299,7 @@ static int hdac_hda_dai_open(struct snd_pcm_substream *substream,
 
 	hda_stream = &pcm->stream[substream->stream];
 
-	ret = hda_stream->ops.open(hda_stream, &hda_pvt->codec, substream);
-	if (ret < 0)
-		snd_hda_codec_pcm_put(pcm);
-
-	return ret;
+	return hda_stream->ops.open(hda_stream, &hda_pvt->codec, substream);
 }
 
 static void hdac_hda_dai_close(struct snd_pcm_substream *substream,
Signature · 1 line
2.25.1
author maintainer
#243 lore raw

PATCH 242/393 MIPS: OCTEON: add missing put_device() call in dwc3_octeon_device_init()

In reply to Greg Kroah-Hartman

From: Yu Kuai <[email protected]>

[ Upstream commit e8b9fc10f2615b9a525fce56981e40b489528355 ]

if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation.

Fixes 93e502b3c2d4 ("MIPS: OCTEON: Platform support for OCTEON III USB controller")
---
 arch/mips/cavium-octeon/octeon-usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/mips/cavium-octeon/octeon-usb.c +4 -1
index cc88a08bc1f73..4017398519cf9 100644
@@ -518,6 +518,7 @@ static int __init dwc3_octeon_device_init(void)
 
 			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 			if (res == NULL) {
+				put_device(&pdev->dev);
 				dev_err(&pdev->dev, "No memory resources\n");
 				return -ENXIO;
 			}
@@ -529,8 +530,10 @@ static int __init dwc3_octeon_device_init(void)
 			 * know the difference.
 			 */
 			base = devm_ioremap_resource(&pdev->dev, res);
-			if (IS_ERR(base))
+			if (IS_ERR(base)) {
+				put_device(&pdev->dev);
 				return PTR_ERR(base);
+			}
 
 			mutex_lock(&dwc3_octeon_clocks_mutex);
 			dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
Signature · 1 line
2.25.1
author maintainer
#244 lore raw

PATCH 243/393 thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id

In reply to Greg Kroah-Hartman

From: Sumeet Pawnikar <[email protected]>

[ Upstream commit 287d959558357e155c889bc35579eb35691a8fcb ]

Update PCI device id for Jasper Lake processor thermal device. With this proc_thermal driver is getting loaded and processor thermal functionality works on Jasper Lake system.

Fixes f64a6583d3f5 ("thermal: int340x: processor_thermal: Add Jasper Lake support")
---
 .../thermal/intel/int340x_thermal/processor_thermal_device.c    | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +1 -1
index 297db1d2d960c..81e8b15ef405d 100644
@@ -43,7 +43,7 @@
 #define PCI_DEVICE_ID_PROC_ICL_THERMAL	0x8a03
 
 /* JasperLake thermal reporting device */
-#define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4503
+#define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4E03
 
 /* TigerLake thermal reporting device */
 #define PCI_DEVICE_ID_PROC_TGL_THERMAL	0x9A03
Signature · 1 line
2.25.1
author maintainer
#245 lore raw

PATCH 244/393 usb: dwc2: Fix error path in gadget registration

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit 33a06f1300a79cfd461cea0268f05e969d4f34ec ]

When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label.

This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters):

dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
no file given for LUN0
g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here ---

Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
PC is at usb_del_gadget_udc+0x38/0xc4
LR is at __mutex_lock+0x31c/0xb18
...
Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval))
Stack: (0xef121db0 to 0xef122000)

...
[<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)

Exception stack(0xef121fb0 to 0xef121ff8)
...
---[ end trace 9724c2fc7cc9c982 ]---

While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call.

Fixes 207324a321a8 ("usb: dwc2: Postponed gadget registration to the udc class driver")
---
 drivers/usb/dwc2/platform.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/dwc2/platform.c +3 -1
index 797afa99ef3b4..4ad85fa2c9328 100644
@@ -543,6 +543,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (hsotg->gadget_enabled) {
 		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
 		if (retval) {
+			hsotg->gadget.udc = NULL;
 			dwc2_hsotg_remove(hsotg);
 			goto error_init;
 		}
@@ -554,7 +555,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (hsotg->params.activate_stm_id_vb_detection)
 		regulator_disable(hsotg->usb33d);
 error:
-	dwc2_lowlevel_hw_disable(hsotg);
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
+		dwc2_lowlevel_hw_disable(hsotg);
 	return retval;
 }
 
Signature · 1 line
2.25.1
author maintainer
#246 lore raw

PATCH 245/393 usb: gadget: f_uac2: fix AC Interface Header Descriptor wTotalLength

In reply to Greg Kroah-Hartman

From: Ruslan Bilovol <[email protected]>

[ Upstream commit a9cf8715180b18c62addbfe6f6267b8101903119 ]

As per UAC2 spec (ch. 4.7.2), wTotalLength of AC Interface Header Descriptor "includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors."

Thus add its size to its wTotalLength.

Also after recent changes wTotalLength is calculated dynamically, update static definition of uac2_ac_header_descriptor accordingly

Fixes 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
---
 drivers/usb/gadget/function/f_uac2.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/usb/gadget/function/f_uac2.c +2 -5
index db2d4980cb354..3633df6d7610f 100644
@@ -215,10 +215,7 @@ static struct uac2_ac_header_descriptor ac_hdr_desc = {
 	.bDescriptorSubtype = UAC_MS_HEADER,
 	.bcdADC = cpu_to_le16(0x200),
 	.bCategory = UAC2_FUNCTION_IO_BOX,
-	.wTotalLength = cpu_to_le16(sizeof in_clk_src_desc
-			+ sizeof out_clk_src_desc + sizeof usb_out_it_desc
-			+ sizeof io_in_it_desc + sizeof usb_in_ot_desc
-			+ sizeof io_out_ot_desc),
+	/* .wTotalLength = DYNAMIC */
 	.bmControls = 0,
 };
 
@@ -501,7 +498,7 @@ static void setup_descriptor(struct f_uac2_opts *opts)
 	as_in_hdr_desc.bTerminalLink = usb_in_ot_desc.bTerminalID;
 
 	iad_desc.bInterfaceCount = 1;
-	ac_hdr_desc.wTotalLength = 0;
+	ac_hdr_desc.wTotalLength = cpu_to_le16(sizeof(ac_hdr_desc));
 
 	if (EPIN_EN(opts)) {
 		u16 len = le16_to_cpu(ac_hdr_desc.wTotalLength);
Signature · 1 line
2.25.1
author maintainer
#247 lore raw

PATCH 246/393 scsi: megaraid_sas: Clear affinity hint

In reply to Greg Kroah-Hartman

From: Tomas Henzl <[email protected]>

[ Upstream commit 1eb81df5c53b1e785fdef298d533feab991381e4 ]

To avoid a warning in free_irq, clear the affinity hint.

Fixes f0b9e7bdc309 ("scsi: megaraid_sas: Set affinity for high IOPS reply queues")
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/scsi/megaraid/megaraid_sas_base.c +8 -1
index babe85d7b537a..5a95c56ff7c26 100644
@@ -5602,9 +5602,13 @@ megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe)
 			&instance->irq_context[i])) {
 			dev_err(&instance->pdev->dev,
 				"Failed to register IRQ for vector %d.\n", i);
-			for (j = 0; j < i; j++)
+			for (j = 0; j < i; j++) {
+				if (j < instance->low_latency_index_start)
+					irq_set_affinity_hint(
+						pci_irq_vector(pdev, j), NULL);
 				free_irq(pci_irq_vector(pdev, j),
 					 &instance->irq_context[j]);
+			}
 			/* Retry irq register for IO_APIC*/
 			instance->msix_vectors = 0;
 			instance->msix_load_balance = false;
@@ -5642,6 +5646,9 @@ megasas_destroy_irqs(struct megasas_instance *instance) {
 
 	if (instance->msix_vectors)
 		for (i = 0; i < instance->msix_vectors; i++) {
+			if (i < instance->low_latency_index_start)
+				irq_set_affinity_hint(
+				    pci_irq_vector(instance->pdev, i), NULL);
 			free_irq(pci_irq_vector(instance->pdev, i),
 				 &instance->irq_context[i]);
 		}
Signature · 1 line
2.25.1
author maintainer
#248 lore raw

PATCH 247/393 scsi: mesh: Fix panic after host or bus reset

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit edd7dd2292ab9c3628b65c4d04514c3068ad54f6 ]

Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus results in EH measures and a panic:

[   25.499838] mesh: configured for synchronous 5 MB/s
[   25.787154] mesh: performing initial bus reset...
[   29.867115] scsi host0: MESH
[   29.929527] mesh: target 0 synchronous at 3.6 MB/s
[   29.998763] scsi 0:0:0:0: Direct-Access     CONNER   CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS
[   31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB)
[   32.070975] sd 0:0:0:0: [sda] Write Protect is off
[   32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08
[   32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.332708]  sda: [mac] sda1 sda2 sda3
[   32.417733] sd 0:0:0:0: [sda] Attached SCSI disk
... snip ...
[   76.687067] mesh_abort((ptrval))
[   76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval)
[   76.810798]     ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85
[   76.880720]     dma stat=84e0 cmdptr=1f73d000
[   76.941387]     phase=4 msgphase=0 conn_tgt=0 data_ptr=24576
[   77.005567]     dma_st=1 dma_ct=0 n_msgout=0
[   77.065456]     target 0: req=(ptrval) goes_out=0 saved_ptr=0
[   77.130512] mesh_abort((ptrval))
[   77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval)
[   77.255594]     ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85
[   77.325778]     dma stat=84e0 cmdptr=1f73d000
[   77.387239]     phase=4 msgphase=0 conn_tgt=0 data_ptr=24576
[   77.453665]     dma_st=1 dma_ct=0 n_msgout=0
[   77.515900]     target 0: req=(ptrval) goes_out=0 saved_ptr=0
[   77.582902] mesh_host_reset
[   88.187083] Kernel panic - not syncing: mesh: double DMA start !
[   88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1
[   88.323302] Call Trace:
[   88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable)
[   88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414
[   88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70
[   88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384
[   88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8
[   88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178
[   88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8
[   88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520
[   88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8
[   88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c
[   89.044112] Rebooting in 180 seconds..

In theory, a panic can happen after a bus or host reset with dma_started flag set. Fix this by halting the DMA before reinitializing the host. Don't assume that ms->current_req is set when halt_dma() is invoked as it may not hold for bus or host reset.

BTW, this particular Conner drive can be made to work by inhibiting disconnect/reselect with 'mesh.resel_targets=0'.

---
 drivers/scsi/mesh.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/scsi/mesh.c +7 -1
index 74fb50644678d..4dd50db906779 100644
@@ -1045,6 +1045,8 @@ static void handle_error(struct mesh_state *ms)
 		while ((in_8(&mr->bus_status1) & BS1_RST) != 0)
 			udelay(1);
 		printk("done\n");
+		if (ms->dma_started)
+			halt_dma(ms);
 		handle_reset(ms);
 		/* request_q is empty, no point in mesh_start() */
 		return;
@@ -1357,7 +1359,8 @@ static void halt_dma(struct mesh_state *ms)
 		       ms->conn_tgt, ms->data_ptr, scsi_bufflen(cmd),
 		       ms->tgts[ms->conn_tgt].data_goes_out);
 	}
-	scsi_dma_unmap(cmd);
+	if (cmd)
+		scsi_dma_unmap(cmd);
 	ms->dma_started = 0;
 }
 
@@ -1712,6 +1715,9 @@ static int mesh_host_reset(struct scsi_cmnd *cmd)
 
 	spin_lock_irqsave(ms->host->host_lock, flags);
 
+	if (ms->dma_started)
+		halt_dma(ms);
+
 	/* Reset the controller & dbdma channel */
 	out_le32(&md->control, (RUN|PAUSE|FLUSH|WAKE) << 16);	/* stop dma */
 	out_8(&mr->exception, 0xff);	/* clear all exception bits */
Signature · 1 line
2.25.1
author maintainer
#249 lore raw

PATCH 248/393 net: dsa: mv88e6xxx: MV88E6097 does not support jumbo configuration

In reply to Greg Kroah-Hartman

From: Chris Packham <[email protected]>

[ Upstream commit 0f3c66a3c7b4e8b9f654b3c998e9674376a51b0f ]

The MV88E6097 chip does not support configuring jumbo frames. Prior to commit 5f4366660d65 only the 6352, 6351, 6165 and 6320 chips configured jumbo mode. The refactor accidentally added the function for the 6097. Remove the erroneous function pointer assignment.

Fixes 5f4366660d65 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames")
---
 drivers/net/dsa/mv88e6xxx/chip.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/dsa/mv88e6xxx/chip.c +0 -1
index e065be419a03d..18c892df0a130 100644
@@ -3477,7 +3477,6 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
 	.port_set_ether_type = mv88e6351_port_set_ether_type,
-	.port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
 	.port_egress_rate_limiting = mv88e6095_port_egress_rate_limiting,
 	.port_pause_limit = mv88e6097_port_pause_limit,
 	.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
Signature · 1 line
2.25.1
author maintainer
#250 lore raw

PATCH 249/393 macintosh/via-macii: Access autopoll_devs when inside lock

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 59ea38f6b3af5636edf541768a1ed721eeaca99e ]

The interrupt handler should be excluded when accessing the autopoll_devs variable.

---
 drivers/macintosh/via-macii.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/macintosh/via-macii.c +3 -6
index ac824d7b2dcfc..6aa903529570d 100644
@@ -270,15 +270,12 @@ static int macii_autopoll(int devs)
 	unsigned long flags;
 	int err = 0;
 
+	local_irq_save(flags);
+
 	/* bit 1 == device 1, and so on. */
 	autopoll_devs = devs & 0xFFFE;
 
-	if (!autopoll_devs)
-		return 0;
-
-	local_irq_save(flags);
-
-	if (current_req == NULL) {
+	if (autopoll_devs && !current_req) {
 		/* Send a Talk Reg 0. The controller will repeatedly transmit
 		 * this as long as it is idle.
 		 */
Signature · 1 line
2.25.1
author maintainer
#251 lore raw

PATCH 250/393 PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path

In reply to Greg Kroah-Hartman

From: Kishon Vijay Abraham I <[email protected]>

[ Upstream commit 19abcd790b51b26d775e1170ba2ac086823cceeb ]

commit bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") while refactoring the Cadence PCIe driver to be used as library, removed pm_runtime_get_sync() from cdns_pcie_ep_setup() and cdns_pcie_host_setup() but missed to remove the corresponding pm_runtime_put_sync() in the error path. Fix it here.

Fixes bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library")
---
 drivers/pci/controller/cadence/pcie-cadence-ep.c   | 9 ++-------
 drivers/pci/controller/cadence/pcie-cadence-host.c | 6 +-----
 2 files changed, 3 insertions(+), 12 deletions(-)
drivers/pci/controller/cadence/pcie-cadence-ep.c +2 -7
index 1c173dad67d1d..1fdae37843eff 100644
@@ -8,7 +8,6 @@
 #include <linux/of.h>
 #include <linux/pci-epc.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/sizes.h>
 
 #include "pcie-cadence.h"
@@ -440,8 +439,7 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	epc = devm_pci_epc_create(dev, &cdns_pcie_epc_ops);
 	if (IS_ERR(epc)) {
 		dev_err(dev, "failed to create epc device\n");
-		ret = PTR_ERR(epc);
-		goto err_init;
+		return PTR_ERR(epc);
 	}
 
 	epc_set_drvdata(epc, ep);
@@ -453,7 +451,7 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 			       resource_size(pcie->mem_res));
 	if (ret < 0) {
 		dev_err(dev, "failed to initialize the memory space\n");
-		goto err_init;
+		return ret;
 	}
 
 	ep->irq_cpu_addr = pci_epc_mem_alloc_addr(epc, &ep->irq_phys_addr,
@@ -472,8 +470,5 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
  free_epc_mem:
 	pci_epc_mem_exit(epc);
 
- err_init:
-	pm_runtime_put_sync(dev);
-
 	return ret;
 }
drivers/pci/controller/cadence/pcie-cadence-host.c +1 -5
index 9b1c3966414b1..11eb81da0233f 100644
@@ -7,7 +7,6 @@
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 
 #include "pcie-cadence.h"
 
@@ -256,7 +255,7 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 
 	ret = cdns_pcie_host_init(dev, &resources, rc);
 	if (ret)
-		goto err_init;
+		return ret;
 
 	list_splice_init(&resources, &bridge->windows);
 	bridge->dev.parent = dev;
@@ -274,8 +273,5 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
  err_host_probe:
 	pci_free_resource_list(&resources);
 
- err_init:
-	pm_runtime_put_sync(dev);
-
 	return ret;
 }
Signature · 1 line
2.25.1
author maintainer
#252 lore raw

PATCH 251/393 PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register

In reply to Greg Kroah-Hartman

From: Kishon Vijay Abraham I <[email protected]>

[ Upstream commit e3bca37d15dca118f2ef1f0a068bb6e07846ea20 ]

Commit 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") in order to update Vendor ID, directly wrote to PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration space is read-only register and writing to it will have no effect. Use local management register to configure Vendor ID and Subsystem Vendor ID.

Fixes 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller")
---
 drivers/pci/controller/cadence/pcie-cadence-host.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/pci/controller/cadence/pcie-cadence-host.c +7 -2
index 11eb81da0233f..aa18fb724d2ed 100644
@@ -69,6 +69,7 @@ static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 {
 	struct cdns_pcie *pcie = &rc->pcie;
 	u32 value, ctrl;
+	u32 id;
 
 	/*
 	 * Set the root complex BAR configuration register:
@@ -88,8 +89,12 @@ static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 	cdns_pcie_writel(pcie, CDNS_PCIE_LM_RC_BAR_CFG, value);
 
 	/* Set root port configuration space */
-	if (rc->vendor_id != 0xffff)
-		cdns_pcie_rp_writew(pcie, PCI_VENDOR_ID, rc->vendor_id);
+	if (rc->vendor_id != 0xffff) {
+		id = CDNS_PCIE_LM_ID_VENDOR(rc->vendor_id) |
+			CDNS_PCIE_LM_ID_SUBSYS(rc->vendor_id);
+		cdns_pcie_writel(pcie, CDNS_PCIE_LM_ID, id);
+	}
+
 	if (rc->device_id != 0xffff)
 		cdns_pcie_rp_writew(pcie, PCI_DEVICE_ID, rc->device_id);
 
Signature · 1 line
2.25.1
author maintainer
#253 lore raw

PATCH 252/393 RDMA/core: Fix return error value in _ib_modify_qp() to negative

In reply to Greg Kroah-Hartman

From: Li Heng <[email protected]>

[ Upstream commit 47fda651d5af2506deac57d54887cf55ce26e244 ]

The error codes in _ib_modify_qp() are supposed to be negative errno.

Fixes 7a5c938b9ed0 ("IB/core: Check for rdma_protocol_ib only after validating port_num")
---
 drivers/infiniband/core/verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/core/verbs.c +1 -1
index 56a71337112c5..cf45fd704671f 100644
@@ -1659,7 +1659,7 @@ static int _ib_modify_qp(struct ib_qp *qp, struct ib_qp_attr *attr,
 		if (!(rdma_protocol_ib(qp->device,
 				       attr->alt_ah_attr.port_num) &&
 		      rdma_protocol_ib(qp->device, port))) {
-			ret = EINVAL;
+			ret = -EINVAL;
 			goto out;
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#254 lore raw

PATCH 253/393 Smack: fix another vsscanf out of bounds

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit a6bd4f6d9b07452b0b19842044a6c3ea384b0b88 ]

This is similar to commit 84e99e58e8d1 ("Smack: slab-out-of-bounds in vsscanf") where we added a bounds check on "rule".

Reported-by [email protected]
Fixes f7112e6c9abf ("Smack: allow for significantly longer Smack labels v4")
---
 security/smack/smackfs.c | 4 ++++
 1 file changed, 4 insertions(+)
security/smack/smackfs.c +4 -0
index 840a192e93370..2bae1fc493d16 100644
@@ -905,6 +905,10 @@ static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
 
 	for (i = 0; i < catlen; i++) {
 		rule += SMK_DIGITLEN;
+		if (rule > data + count) {
+			rc = -EOVERFLOW;
+			goto out;
+		}
 		ret = sscanf(rule, "%u", &cat);
 		if (ret != 1 || cat > SMACK_CIPSO_MAXCATNUM)
 			goto out;
Signature · 1 line
2.25.1
author maintainer
#255 lore raw

PATCH 254/393 Smack: prevent underflow in smk_set_cipso()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 42a2df3e829f3c5562090391b33714b2e2e5ad4a ]

We have an upper bound on "maplevel" but forgot to check for negative values.

Fixes e114e473771c ("Smack: Simplified Mandatory Access Control Kernel")
---
 security/smack/smackfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
security/smack/smackfs.c +1 -1
index 2bae1fc493d16..9c4308077574c 100644
@@ -884,7 +884,7 @@ static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
 	}
 
 	ret = sscanf(rule, "%d", &maplevel);
-	if (ret != 1 || maplevel > SMACK_CIPSO_MAXLEVEL)
+	if (ret != 1 || maplevel < 0 || maplevel > SMACK_CIPSO_MAXLEVEL)
 		goto out;
 
 	rule += SMK_DIGITLEN;
Signature · 1 line
2.25.1
author maintainer
#256 lore raw

PATCH 255/393 power: supply: check if calc_soc succeeded in pm860x_init_battery

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit ccf193dee1f0fff55b556928591f7818bac1b3b1 ]

clang static analysis flags this error

88pm860x_battery.c:522:19: warning: Assigned value is
garbage or undefined [core.uninitialized.Assign]

                info->start_soc = soc;
                                ^ ~~~

soc is set by calling calc_soc.
But calc_soc can return without setting soc.

So check the return status and bail similarly to other checks in pm860x_init_battery and initialize soc to silence the warning.

Fixes a830d28b48bf ("power_supply: Enable battery-charger for 88pm860x")
---
 drivers/power/supply/88pm860x_battery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/power/supply/88pm860x_battery.c +4 -2
index 5ca047b3f58fb..23e7d6447ae9d 100644
@@ -433,7 +433,7 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	int ret;
 	int data;
 	int bat_remove;
-	int soc;
+	int soc = 0;
 
 	/* measure enable on GPADC1 */
 	data = MEAS1_GP1;
@@ -496,7 +496,9 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	}
 	mutex_unlock(&info->lock);
 
-	calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	if (ret < 0)
+		goto out;
 
 	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
 	bat_remove = data & BAT_WU_LOG;
Signature · 1 line
2.25.1
author maintainer
#257 lore raw

PATCH 256/393 Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers

In reply to Greg Kroah-Hartman

From: Ismael Ferreras Morezuelas <[email protected]>

[ Upstream commit cde1a8a992875a7479c4321b2a4a190c2e92ec2a ]

For some reason they tend to squat on the very first CSR/ Cambridge Silicon Radio VID/PID instead of paying fees.

This is an extremely common problem; the issue goes as back as 2013 and these devices are only getting more popular, even rebranded by reputable vendors and sold by retailers everywhere.

So, at this point in time there are hundreds of modern dongles reusing the ID of what originally was an early Bluetooth 1.1 controller.

Linux is the only place where they don't work due to spotty checks in our detection code. It only covered a minimum subset.

So what's the big idea? Take advantage of the fact that all CSR chips report the same internal version as both the LMP sub-version and HCI revision number. It always matches, couple that with the manufacturer code, that rarely lies, and we now have a good idea of who is who.

Additionally, by compiling a list of user-reported HCI/lsusb dumps, and searching around for legit CSR dongles in similar product ranges we can find what CSR BlueCore firmware supported which Bluetooth versions.

That way we can narrow down ranges of fakes for each of them.

e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
support BT 1.1 only; so it's a dead giveaway when some third-party BT 4.0 dongle reuses it.

So, to sum things up; there are multiple classes of fake controllers reusing the same 0A12:0001 VID/PID. This has been broken for a while.

Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
IC markings on 0x7558: FR3191AHAL 749H15143 (???)

https://bugzilla.kernel.org/show_bug.cgi?id=60824

---
 drivers/bluetooth/btusb.c         | 74 ++++++++++++++++++++++++++-----
 include/net/bluetooth/bluetooth.h |  2 +
 include/net/bluetooth/hci.h       | 11 +++++
 net/bluetooth/hci_core.c          |  6 ++-
 4 files changed, 81 insertions(+), 12 deletions(-)
drivers/bluetooth/btusb.c +64 -10
index 4085387f13cfb..0c77240fd7dd4 100644
@@ -1631,6 +1631,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_local_version *rp;
 	struct sk_buff *skb;
+	bool is_fake = false;
 
 	BT_DBG("%s", hdev->name);
 
@@ -1650,18 +1651,69 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 
 	rp = (struct hci_rp_read_local_version *)skb->data;
 
-	/* Detect controllers which aren't real CSR ones. */
+	/* Detect a wide host of Chinese controllers that aren't CSR.
+	 *
+	 * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
+	 *
+	 * The main thing they have in common is that these are really popular low-cost
+	 * options that support newer Bluetooth versions but rely on heavy VID/PID
+	 * squatting of this poor old Bluetooth 1.1 device. Even sold as such.
+	 *
+	 * We detect actual CSR devices by checking that the HCI manufacturer code
+	 * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and
+	 * HCI rev values always match. As they both store the firmware number.
+	 */
 	if (le16_to_cpu(rp->manufacturer) != 10 ||
-	    le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
+	    le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver))
+		is_fake = true;
+
+	/* Known legit CSR firmware build numbers and their supported BT versions:
+	 * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e
+	 * - 1.2 (0x2) ->                 0x04d9, 0x0529
+	 * - 2.0 (0x3) ->         0x07a6, 0x07ad, 0x0c5c
+	 * - 2.1 (0x4) ->         0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External)
+	 * - 4.0 (0x6) ->         0x1d86, 0x2031, 0x22bb
+	 *
+	 * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
+	 *      support BT 1.1 only; so it's a dead giveaway when some
+	 *      third-party BT 4.0 dongle reuses it.
+	 */
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x034e &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_1)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_2)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_0)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_1)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_4_0)
+		is_fake = true;
+
+	if (is_fake) {
+		bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds...");
+
+		/* Generally these clones have big discrepancies between
+		 * advertised features and what's actually supported.
+		 * Probably will need to be expanded in the future;
+		 * without these the controller will lock up.
+		 */
+		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+
 		/* Clear the reset quirk since this is not an actual
 		 * early Bluetooth 1.1 device from CSR.
 		 */
 		clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
-
-		/* These fake CSR controllers have all a broken
-		 * stored link key handling and so just disable it.
-		 */
-		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+		clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	kfree_skb(skb);
@@ -3905,11 +3957,13 @@ static int btusb_probe(struct usb_interface *intf,
 		if (bcdDevice < 0x117)
 			set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
 
+		/* This must be set first in case we disable it for fakes */
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
 		/* Fake CSR devices with broken commands */
-		if (bcdDevice <= 0x100 || bcdDevice == 0x134)
+		if (le16_to_cpu(udev->descriptor.idVendor)  == 0x0a12 &&
+		    le16_to_cpu(udev->descriptor.idProduct) == 0x0001)
 			hdev->setup = btusb_setup_csr;
-
-		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_SNIFFER) {
include/net/bluetooth/bluetooth.h +2 -0
index 1576353a27732..15c54deb2b8e0 100644
@@ -41,6 +41,8 @@
 #define BLUETOOTH_VER_1_1	1
 #define BLUETOOTH_VER_1_2	2
 #define BLUETOOTH_VER_2_0	3
+#define BLUETOOTH_VER_2_1	4
+#define BLUETOOTH_VER_4_0	6
 
 /* Reserv for core and drivers use */
 #define BT_SKB_RESERVE	8
include/net/bluetooth/hci.h +11 -0
index 25c2e5ee81dc5..b2c567fc3338c 100644
@@ -223,6 +223,17 @@ enum {
 	 * supported.
 	 */
 	HCI_QUIRK_VALID_LE_STATES,
+
+	/* When this quirk is set, then erroneous data reporting
+	 * is ignored. This is mainly due to the fact that the HCI
+	 * Read Default Erroneous Data Reporting command is advertised,
+	 * but not supported; these controllers often reply with unknown
+	 * command and tend to lock up randomly. Needing a hard reset.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_BROKEN_ERR_DATA_REPORTING,
 };
 
 /* HCI device flags */
net/bluetooth/hci_core.c +4 -2
index 828847ac4b33c..4e5ecc2c9602d 100644
@@ -605,7 +605,8 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
 	if (hdev->commands[8] & 0x01)
 		hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL);
 
-	if (hdev->commands[18] & 0x04)
+	if (hdev->commands[18] & 0x04 &&
+	    !test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks))
 		hci_req_add(req, HCI_OP_READ_DEF_ERR_DATA_REPORTING, 0, NULL);
 
 	/* Some older Broadcom based Bluetooth 1.2 controllers do not
@@ -846,7 +847,8 @@ static int hci_init4_req(struct hci_request *req, unsigned long opt)
 	/* Set erroneous data reporting if supported to the wideband speech
 	 * setting value
 	 */
-	if (hdev->commands[18] & 0x08) {
+	if (hdev->commands[18] & 0x08 &&
+	    !test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) {
 		bool enabled = hci_dev_test_flag(hdev,
 						 HCI_WIDEBAND_SPEECH_ENABLED);
 
Signature · 1 line
2.25.1
author maintainer
#258 lore raw

PATCH 257/393 Bluetooth: hci_h5: Set HCI_UART_RESET_ON_INIT to correct flags

In reply to Greg Kroah-Hartman

From: Nicolas Boichat <[email protected]>

[ Upstream commit a7ad4b6119d740b1ec5788f1b98be0fd1c1b5a5a ]

HCI_UART_RESET_ON_INIT belongs in hdev_flags, not flags.

Fixes ce945552fde4a09 ("Bluetooth: hci_h5: Add support for serdev enumerated devices")
---
 drivers/bluetooth/hci_h5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/hci_h5.c +1 -1
index 106c110efe560..0ce3d9fe02867 100644
@@ -793,7 +793,7 @@ static int h5_serdev_probe(struct serdev_device *serdev)
 	if (!h5)
 		return -ENOMEM;
 
-	set_bit(HCI_UART_RESET_ON_INIT, &h5->serdev_hu.flags);
+	set_bit(HCI_UART_RESET_ON_INIT, &h5->serdev_hu.hdev_flags);
 
 	h5->hu = &h5->serdev_hu;
 	h5->serdev_hu.serdev = serdev;
Signature · 1 line
2.25.1
author maintainer
#259 lore raw

PATCH 258/393 Bluetooth: hci_serdev: Only unregister device if it was registered

In reply to Greg Kroah-Hartman

From: Nicolas Boichat <[email protected]>

[ Upstream commit 202798db9570104728dce8bb57dfeed47ce764bc ]

We should not call hci_unregister_dev if the device was not successfully registered.

Fixes c34dc3bfa7642fd ("Bluetooth: hci_serdev: Introduce hci_uart_unregister_device()")
---
 drivers/bluetooth/hci_serdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_serdev.c +2 -1
index 4652896d49908..ad2f26cb2622e 100644
@@ -357,7 +357,8 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 
 	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
-	hci_unregister_dev(hdev);
+	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
+		hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
 
 	cancel_work_sync(&hu->write_work);
Signature · 1 line
2.25.1
author maintainer
#260 lore raw

PATCH 259/393 Bluetooth: Fix suspend notifier race

In reply to Greg Kroah-Hartman

From: Abhishek Pandit-Subedi <[email protected]>

[ Upstream commit 4e8c36c3b0d73d46aa27cfd4308aaa445a1067df ]

Unregister from suspend notifications and cancel suspend preparations before running hci_dev_do_close. Otherwise, the suspend notifier may race with unregister and cause cmd_timeout even after hdev has been freed.

Below is the trace from when this panic was seen:

[  832.578518] Bluetooth: hci_core.c:hci_cmd_timeout() hci0: command 0x0c05 tx timeout
[  832.586200] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  832.586203] #PF: supervisor read access in kernel mode
[  832.586205] #PF: error_code(0x0000) - not-present page
[  832.586206] PGD 0 P4D 0
[  832.586210] PM: suspend exit
[  832.608870] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  832.613232] CPU: 3 PID: 10755 Comm: kworker/3:7 Not tainted 5.4.44-04894-g1e9dbb96a161 #1
[  832.630036] Workqueue: events hci_cmd_timeout [bluetooth]
[  832.630046] RIP: 0010:__queue_work+0xf0/0x374
[  832.630051] RSP: 0018:ffff9b5285f1fdf8 EFLAGS: 00010046
[  832.674033] RAX: ffff8a97681bac00 RBX: 0000000000000000 RCX: ffff8a976a000600
[  832.681162] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8a976a000748
[  832.688289] RBP: ffff9b5285f1fe38 R08: 0000000000000000 R09: ffff8a97681bac00
[  832.695418] R10: 0000000000000002 R11: ffff8a976a0006d8 R12: ffff8a9745107600
[  832.698045] usb 1-6: new full-speed USB device number 119 using xhci_hcd
[  832.702547] R13: ffff8a9673658850 R14: 0000000000000040 R15: 000000000000001e
[  832.702549] FS:  0000000000000000(0000) GS:ffff8a976af80000(0000) knlGS:0000000000000000
[  832.702550] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  832.702550] CR2: 0000000000000000 CR3: 000000010415a000 CR4: 00000000003406e0
[  832.702551] Call Trace:
[  832.702558]  queue_work_on+0x3f/0x68
[  832.702562]  process_one_work+0x1db/0x396
[  832.747397]  worker_thread+0x216/0x375
[  832.751147]  kthread+0x138/0x140
[  832.754377]  ? pr_cont_work+0x58/0x58
[  832.758037]  ? kthread_blkcg+0x2e/0x2e
[  832.761787]  ret_from_fork+0x22/0x40
[  832.846191] ---[ end trace fa93f466da517212 ]---
Fixes 9952d90ea2885 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
---
 net/bluetooth/hci_core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/bluetooth/hci_core.c +3 -2
index 4e5ecc2c9602d..c17e1a3e8218c 100644
@@ -3597,9 +3597,10 @@ void hci_unregister_dev(struct hci_dev *hdev)
 
 	cancel_work_sync(&hdev->power_on);
 
-	hci_dev_do_close(hdev);
-
 	unregister_pm_notifier(&hdev->suspend_notifier);
+	cancel_work_sync(&hdev->suspend_prepare);
+
+	hci_dev_do_close(hdev);
 
 	if (!test_bit(HCI_INIT, &hdev->flags) &&
 	    !hci_dev_test_flag(hdev, HCI_SETUP) &&
Signature · 1 line
2.25.1
author maintainer
#261 lore raw

PATCH 260/393 Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

In reply to Greg Kroah-Hartman

From: Venkata Lakshmi Narayana Gubba <[email protected]>

[ Upstream commit 58789a1990c1a849a461ac912e72a698a771951a ]

Setting memdump state to idle prior to setting of callback function pointer for command timeout to NULL,causing the issue.Now moved the initialisation of memdump state to qca_setup().

Fixes d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
---
 drivers/bluetooth/hci_qca.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/bluetooth/hci_qca.c +5 -4
index 9869ae0f7b71e..6a3c80e1b19cd 100644
@@ -1633,6 +1633,8 @@ static int qca_setup(struct hci_uart *hu)
 	bt_dev_info(hdev, "setting up %s",
 		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
 
+	qca->memdump_state = QCA_MEMDUMP_IDLE;
+
 retry:
 	ret = qca_power_on(hdev);
 	if (ret)
@@ -1776,9 +1778,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
 	qca_flush(hu);
 	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
 
-	hu->hdev->hw_error = NULL;
-	hu->hdev->cmd_timeout = NULL;
-
 	/* Non-serdev device usually is powered by external power
 	 * and don't need additional action in driver for power down
 	 */
@@ -1800,6 +1799,9 @@ static int qca_power_off(struct hci_dev *hdev)
 	struct qca_data *qca = hu->priv;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 
+	hu->hdev->hw_error = NULL;
+	hu->hdev->cmd_timeout = NULL;
+
 	/* Stop sending shutdown command if soc crashes. */
 	if (qca_is_wcn399x(soc_type)
 		&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
@@ -1807,7 +1809,6 @@ static int qca_power_off(struct hci_dev *hdev)
 		usleep_range(8000, 10000);
 	}
 
-	qca->memdump_state = QCA_MEMDUMP_IDLE;
 	qca_power_shutdown(hu);
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#262 lore raw

PATCH 261/393 net: dsa: rtl8366: Fix VLAN semantics

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

[ Upstream commit 15ab7906cc9290afb006df1bb1074907fbcc7061 ]

The RTL8366 would not handle adding new members (ports) to a VLAN: the code assumed that ->port_vlan_add() was only called once for a single port. When intializing the switch with .configure_vlan_while_not_filtering set to true, the function is called numerous times for adding all ports to VLAN1, which was something the code could not handle.

Alter rtl8366_set_vlan() to just |= new members and untagged flags to 4k and MC VLAN table entries alike. This makes it possible to just add new ports to a VLAN.

Put in some helpful debug code that can be used to find any further bugs here.

Cc DENG Qingfang <[email protected]>
Cc Mauri Sandberg <[email protected]>
Fixes d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
---
 drivers/net/dsa/rtl8366.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)
drivers/net/dsa/rtl8366.c +17 -4
index ac88caca5ad4d..a75dcd6698b8a 100644
@@ -43,18 +43,26 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
 	int ret;
 	int i;
 
+	dev_dbg(smi->dev,
+		"setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
+		vid, member, untag);
+
 	/* Update the 4K table */
 	ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
 	if (ret)
 		return ret;
 
-	vlan4k.member = member;
-	vlan4k.untag = untag;
+	vlan4k.member |= member;
+	vlan4k.untag |= untag;
 	vlan4k.fid = fid;
 	ret = smi->ops->set_vlan_4k(smi, &vlan4k);
 	if (ret)
 		return ret;
 
+	dev_dbg(smi->dev,
+		"resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
+		vid, vlan4k.member, vlan4k.untag);
+
 	/* Try to find an existing MC entry for this VID */
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		struct rtl8366_vlan_mc vlanmc;
@@ -65,11 +73,16 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
 
 		if (vid == vlanmc.vid) {
 			/* update the MC entry */
-			vlanmc.member = member;
-			vlanmc.untag = untag;
+			vlanmc.member |= member;
+			vlanmc.untag |= untag;
 			vlanmc.fid = fid;
 
 			ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+
+			dev_dbg(smi->dev,
+				"resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
+				vid, vlanmc.member, vlanmc.untag);
+
 			break;
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#263 lore raw

PATCH 262/393 net: dsa: rtl8366: Fix VLAN set-up

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

[ Upstream commit 788abc6d9d278ed6fa1fa94db2098481a04152b7 ]

Alter the rtl8366_vlan_add() to call rtl8366_set_vlan() inside the loop that goes over all VIDs since we now properly support calling that function more than once. Augment the loop to postincrement as this is more intuitive.

The loop moved past the last VID but called rtl8366_set_vlan() with the port number instead of the VID, assuming a 1-to-1 correspondence between ports and VIDs. This was also a bug.

Cc DENG Qingfang <[email protected]>
Cc Mauri Sandberg <[email protected]>
Fixes d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
---
 drivers/net/dsa/rtl8366.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/dsa/rtl8366.c +7 -7
index a75dcd6698b8a..1368816abaed1 100644
@@ -397,7 +397,7 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
 	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
 		dev_err(smi->dev, "port is DSA or CPU port\n");
 
-	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 		int pvid_val = 0;
 
 		dev_info(smi->dev, "add VLAN %04x\n", vid);
@@ -420,13 +420,13 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
 			if (ret < 0)
 				return;
 		}
-	}
 
-	ret = rtl8366_set_vlan(smi, port, member, untag, 0);
-	if (ret)
-		dev_err(smi->dev,
-			"failed to set up VLAN %04x",
-			vid);
+		ret = rtl8366_set_vlan(smi, vid, member, untag, 0);
+		if (ret)
+			dev_err(smi->dev,
+				"failed to set up VLAN %04x",
+				vid);
+	}
 }
 EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
 
Signature · 1 line
2.25.1
author maintainer
#264 lore raw

PATCH 263/393 xfs: fix inode allocation block res calculation precedence

In reply to Greg Kroah-Hartman

From: Brian Foster <[email protected]>

[ Upstream commit b2a8864728683443f34a9fd33a2b78b860934cc1 ]

The block reservation calculation for inode allocation is supposed to consist of the blocks required for the inode chunk plus (maxlevels-1) of the inode btree multiplied by the number of inode btrees in the fs (2 when finobt is enabled, 1 otherwise).

Instead, the macro returns (ialloc_blocks + 2) due to a precedence error in the calculation logic. This leads to block reservation overruns via generic/531 on small block filesystems with finobt enabled. Add braces to fix the calculation and reserve the appropriate number of blocks.

Fixes 9d43b180af67 ("xfs: update inode allocation/free transaction reservations for finobt")
---
 fs/xfs/libxfs/xfs_trans_space.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/xfs/libxfs/xfs_trans_space.h +1 -1
index 88221c7a04ccf..c6df01a2a1585 100644
@@ -57,7 +57,7 @@
 	XFS_DAREMOVE_SPACE_RES(mp, XFS_DATA_FORK)
 #define	XFS_IALLOC_SPACE_RES(mp)	\
 	(M_IGEO(mp)->ialloc_blks + \
-	 (xfs_sb_version_hasfinobt(&mp->m_sb) ? 2 : 1 * \
+	 ((xfs_sb_version_hasfinobt(&mp->m_sb) ? 2 : 1) * \
 	  (M_IGEO(mp)->inobt_maxlevels - 1)))
 
 /*
Signature · 1 line
2.25.1
author maintainer
#265 lore raw

PATCH 264/393 xfs: clear XFS_DQ_FREEING if we cant lock the dquot buffer to flush

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit c97738a960a86081a147e7d436138e6481757445 ]

In commit 8d3d7e2b35ea, we changed xfs_qm_dqpurge to bail out if we can't lock the dquot buf to flush the dquot. This prevents the AIL from blocking on the dquot, but it also forgets to clear the FREEING flag on its way out. A subsequent purge attempt will see the FREEING flag is set and bail out, which leads to dqpurge_all failing to purge all the dquots.

(copy-pasting from Dave Chinner's identical patch)

This was found by inspection after having xfs/305 hang 1 in ~50 iterations in a quotaoff operation:

[ 8872.301115] xfs_quota       D13888 92262  91813 0x00004002
[ 8872.302538] Call Trace:
[ 8872.303193]  __schedule+0x2d2/0x780
[ 8872.304108]  ? do_raw_spin_unlock+0x57/0xd0
[ 8872.305198]  schedule+0x6e/0xe0
[ 8872.306021]  schedule_timeout+0x14d/0x300
[ 8872.307060]  ? __next_timer_interrupt+0xe0/0xe0
[ 8872.308231]  ? xfs_qm_dqusage_adjust+0x200/0x200
[ 8872.309422]  schedule_timeout_uninterruptible+0x2a/0x30
[ 8872.310759]  xfs_qm_dquot_walk.isra.0+0x15a/0x1b0
[ 8872.311971]  xfs_qm_dqpurge_all+0x7f/0x90
[ 8872.313022]  xfs_qm_scall_quotaoff+0x18d/0x2b0
[ 8872.314163]  xfs_quota_disable+0x3a/0x60
[ 8872.315179]  kernel_quotactl+0x7e2/0x8d0
[ 8872.316196]  ? __do_sys_newstat+0x51/0x80
[ 8872.317238]  __x64_sys_quotactl+0x1e/0x30
[ 8872.318266]  do_syscall_64+0x46/0x90
[ 8872.319193]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 8872.320490] RIP: 0033:0x7f46b5490f2a
[ 8872.321414] Code: Bad RIP value.

Returning -EAGAIN from xfs_qm_dqpurge() without clearing the XFS_DQ_FREEING flag means the xfs_qm_dqpurge_all() code can never free the dquot, and we loop forever waiting for the XFS_DQ_FREEING flag to go away on the dquot that leaked it via -EAGAIN.

---
 fs/xfs/xfs_qm.c | 1 +
 1 file changed, 1 insertion(+)
fs/xfs/xfs_qm.c +1 -0
index c225691fad156..2a0cdca80f861 100644
@@ -148,6 +148,7 @@ xfs_qm_dqpurge(
 			error = xfs_bwrite(bp);
 			xfs_buf_relse(bp);
 		} else if (error == -EAGAIN) {
+			dqp->dq_flags &= ~XFS_DQ_FREEING;
 			goto out_unlock;
 		}
 		xfs_dqflock(dqp);
Signature · 1 line
2.25.1
author maintainer
#266 lore raw

PATCH 265/393 selftests/powerpc: Squash spurious errors due to device removal

In reply to Greg Kroah-Hartman

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 5f8cf6475828b600ff6d000e580c961ac839cc61 ]

For drivers that don't have the error handling callbacks we implement recovery by removing the device and re-probing it. This causes the sysfs directory for the PCI device to be removed which causes the following spurious error to be printed when checking the PE state:

Breaking 0005:03:00.0...
./eeh-basic.sh: line 13: can't open /sys/bus/pci/devices/0005:03:00.0/eeh_pe_state: no such file 0005:03:00.0, waited 0/60
0005:03:00.0, waited 1/60
0005:03:00.0, waited 2/60
0005:03:00.0, waited 3/60
0005:03:00.0, waited 4/60
0005:03:00.0, waited 5/60
0005:03:00.0, waited 6/60
0005:03:00.0, waited 7/60
0005:03:00.0, Recovered after 8 seconds

We currently try to avoid this by checking if the PE state file exists before reading from it. This is however inherently racy so re-work the state checking so that we only read from the file once, and we squash any errors that occur while reading.

Fixes 85d86c8aa52e ("selftests/powerpc: Add basic EEH selftest")
---
 tools/testing/selftests/powerpc/eeh/eeh-functions.sh | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
tools/testing/selftests/powerpc/eeh/eeh-functions.sh +8 -3
index f52ed92b53e74..00dc32c0ed75c 100755
@@ -5,12 +5,17 @@ pe_ok() {
 	local dev="$1"
 	local path="/sys/bus/pci/devices/$dev/eeh_pe_state"
 
-	if ! [ -e "$path" ] ; then
+	# if a driver doesn't support the error handling callbacks then the
+	# device is recovered by removing and re-probing it. This causes the
+	# sysfs directory to disappear so read the PE state once and squash
+	# any potential error messages
+	local eeh_state="$(cat $path 2>/dev/null)"
+	if [ -z "$eeh_state" ]; then
 		return 1;
 	fi
 
-	local fw_state="$(cut -d' ' -f1 < $path)"
-	local sw_state="$(cut -d' ' -f2 < $path)"
+	local fw_state="$(echo $eeh_state | cut -d' ' -f1)"
+	local sw_state="$(echo $eeh_state | cut -d' ' -f2)"
 
 	# If EEH_PE_ISOLATED or EEH_PE_RECOVERING are set then the PE is in an
 	# error state or being recovered. Either way, not ok.
Signature · 1 line
2.25.1
author maintainer
#267 lore raw

PATCH 266/393 powerpc/32s: Fix CONFIG_BOOK3S_601 uses

In reply to Greg Kroah-Hartman

From: Michael Ellerman <[email protected]>

[ Upstream commit df4d4ef22446b3a789a4efd74d34f2ec1e24deb2 ]

We have two uses of CONFIG_BOOK3S_601, which doesn't exist. Fix them to use CONFIG_PPC_BOOK3S_601 which is the correct symbol.

Fixes 12c3f1fd87bf ("powerpc/32s: get rid of CPU_FTR_601 feature")
---
 arch/powerpc/include/asm/ptrace.h | 2 +-
 arch/powerpc/include/asm/timex.h  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/ptrace.h +1 -1
index e0195e6b892bc..71ade62fb8975 100644
@@ -206,7 +206,7 @@ do {									      \
 #endif /* __powerpc64__ */
 
 #define arch_has_single_step()	(1)
-#ifndef CONFIG_BOOK3S_601
+#ifndef CONFIG_PPC_BOOK3S_601
 #define arch_has_block_step()	(true)
 #else
 #define arch_has_block_step()	(false)
arch/powerpc/include/asm/timex.h +1 -1
index d2d2c4bd84358..6047402b0a4db 100644
@@ -17,7 +17,7 @@ typedef unsigned long cycles_t;
 
 static inline cycles_t get_cycles(void)
 {
-	if (IS_ENABLED(CONFIG_BOOK3S_601))
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S_601))
 		return 0;
 
 	return mftb();
Signature · 1 line
2.25.1
author maintainer
#268 lore raw

PATCH 267/393 powerpc/boot: Fix CONFIG_PPC_MPC52XX references

In reply to Greg Kroah-Hartman

From: Michael Ellerman <[email protected]>

[ Upstream commit e5eff89657e72a9050d95fde146b54c7dc165981 ]

Commit 866bfc75f40e ("powerpc: conditionally compile platform-specific serial drivers") made some code depend on CONFIG_PPC_MPC52XX, which doesn't exist.

Fix it to use CONFIG_PPC_MPC52xx.

Fixes 866bfc75f40e ("powerpc: conditionally compile platform-specific serial drivers")
---
 arch/powerpc/boot/Makefile | 2 +-
 arch/powerpc/boot/serial.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/boot/Makefile +1 -1
index c53a1b8bba8be..e32a9e40a522e 100644
@@ -119,7 +119,7 @@ src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
 		elf_util.c $(zlib-y) devtree.c stdlib.c \
 		oflib.c ofconsole.c cuboot.c
 
-src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c
+src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c
 src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c
 ifndef CONFIG_PPC64_BOOT_WRAPPER
 src-wlib-y += crtsavres.S
arch/powerpc/boot/serial.c +1 -1
index 9457863147f9b..00179cd6bdd08 100644
@@ -128,7 +128,7 @@ int serial_console_init(void)
 	         dt_is_compatible(devp, "fsl,cpm2-smc-uart"))
 		rc = cpm_console_init(devp, &serial_cd);
 #endif
-#ifdef CONFIG_PPC_MPC52XX
+#ifdef CONFIG_PPC_MPC52xx
 	else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart"))
 		rc = mpc5200_psc_console_init(devp, &serial_cd);
 #endif
Signature · 1 line
2.25.1
author maintainer
#269 lore raw

PATCH 268/393 selftests/powerpc: Fix CPU affinity for child process

In reply to Greg Kroah-Hartman

From: Harish <[email protected]>

[ Upstream commit 854eb5022be04f81e318765f089f41a57c8e5d83 ]

On systems with large number of cpus, test fails trying to set affinity by calling sched_setaffinity() with smaller size for affinity mask. This patch fixes it by making sure that the size of allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs().

---
 .../powerpc/benchmarks/context_switch.c       | 21 ++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)
tools/testing/selftests/powerpc/benchmarks/context_switch.c +16 -5
index a2e8c9da7fa53..d50cc05df4952 100644
@@ -19,6 +19,7 @@
 #include <limits.h>
 #include <sys/time.h>
 #include <sys/syscall.h>
+#include <sys/sysinfo.h>
 #include <sys/types.h>
 #include <sys/shm.h>
 #include <linux/futex.h>
@@ -104,8 +105,9 @@ static void start_thread_on(void *(*fn)(void *), void *arg, unsigned long cpu)
 
 static void start_process_on(void *(*fn)(void *), void *arg, unsigned long cpu)
 {
-	int pid;
-	cpu_set_t cpuset;
+	int pid, ncpus;
+	cpu_set_t *cpuset;
+	size_t size;
 
 	pid = fork();
 	if (pid == -1) {
@@ -116,14 +118,23 @@ static void start_process_on(void *(*fn)(void *), void *arg, unsigned long cpu)
 	if (pid)
 		return;
 
-	CPU_ZERO(&cpuset);
-	CPU_SET(cpu, &cpuset);
+	ncpus = get_nprocs();
+	size = CPU_ALLOC_SIZE(ncpus);
+	cpuset = CPU_ALLOC(ncpus);
+	if (!cpuset) {
+		perror("malloc");
+		exit(1);
+	}
+	CPU_ZERO_S(size, cpuset);
+	CPU_SET_S(cpu, size, cpuset);
 
-	if (sched_setaffinity(0, sizeof(cpuset), &cpuset)) {
+	if (sched_setaffinity(0, size, cpuset)) {
 		perror("sched_setaffinity");
+		CPU_FREE(cpuset);
 		exit(1);
 	}
 
+	CPU_FREE(cpuset);
 	fn(arg);
 
 	exit(0);
Signature · 1 line
2.25.1
author maintainer
#270 lore raw

PATCH 269/393 nvmem: sprd: Fix return value of sprd_efuse_probe()

In reply to Greg Kroah-Hartman

From: Tiezhu Yang <[email protected]>

[ Upstream commit bcd14bb7a68520bf88e45e91d354e43535624f82 ]

When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed.

Fixes 096030e7f449 ("nvmem: sprd: Add Spreadtrum SoCs eFuse support")
---
 drivers/nvmem/sprd-efuse.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nvmem/sprd-efuse.c +2 -2
index 925feb21d5adf..59523245db8a5 100644
@@ -378,8 +378,8 @@ static int sprd_efuse_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	efuse->base = devm_platform_ioremap_resource(pdev, 0);
-	if (!efuse->base)
-		return -ENOMEM;
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
 
 	ret = of_hwspin_lock_get_id(np, 0);
 	if (ret < 0) {
Signature · 1 line
2.25.1
author maintainer
#271 lore raw

PATCH 270/393 RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP

In reply to Greg Kroah-Hartman

From: Mark Zhang <[email protected]>

[ Upstream commit 1d70ad0f85435a7262de802b104e49e6598c50ff ]

When dumping QPs bound to a counter, raw QPs should be allowed to dump without the CAP_NET_RAW privilege. This is consistent with what "rdma res show qp" does.

Fixes c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback")
---
 drivers/infiniband/core/nldev.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/infiniband/core/nldev.c +0 -3
index e16105be2eb23..98cd6403ca602 100644
@@ -738,9 +738,6 @@ static int fill_stat_counter_qps(struct sk_buff *msg,
 	xa_lock(&rt->xa);
 	xa_for_each(&rt->xa, id, res) {
 		qp = container_of(res, struct ib_qp, res);
-		if (qp->qp_type == IB_QPT_RAW_PACKET && !capable(CAP_NET_RAW))
-			continue;
-
 		if (!qp->counter || (qp->counter->id != counter->id))
 			continue;
 
Signature · 1 line
2.25.1
author maintainer
#272 lore raw

PATCH 271/393 PCI: Release IVRS table in AMD ACS quirk

In reply to Greg Kroah-Hartman

From: Hanjun Guo <[email protected]>

[ Upstream commit 090688fa4e448284aaa16136372397d7d10814db ]

The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping.

In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it.

Fixes 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices")
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pci/quirks.c +2 -0
index cd522dd3dd585..5622603d96d4e 100644
@@ -4422,6 +4422,8 @@ static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
+	acpi_put_table(header);
+
 	/* Filter out flags not applicable to multifunction */
 	acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT);
 
Signature · 1 line
2.25.1
author maintainer
#273 lore raw

PATCH 272/393 cpufreq: ap806: fix cpufreq driver needs ap cpu clk

In reply to Greg Kroah-Hartman

From: Sven Auhagen <[email protected]>

[ Upstream commit 8c37ad2f523396e15cf002b29f8f796447c71932 ]

The Armada 8K cpufreq driver needs the Armada AP CPU CLK to work. This dependency is currently not satisfied and the ARMADA_AP_CPU_CLK can not be selected independently.

Add it to the cpufreq Armada8k driver.

Fixes f525a670533d ("cpufreq: ap806: add cpufreq driver for Armada 8K")
---
 drivers/cpufreq/Kconfig.arm | 1 +
 1 file changed, 1 insertion(+)
drivers/cpufreq/Kconfig.arm +1 -0
index 15c1a12315164..c65241bfa5128 100644
@@ -41,6 +41,7 @@ config ARM_ARMADA_37XX_CPUFREQ
 config ARM_ARMADA_8K_CPUFREQ
 	tristate "Armada 8K CPUFreq driver"
 	depends on ARCH_MVEBU && CPUFREQ_DT
+	select ARMADA_AP_CPU_CLK
 	help
 	  This enables the CPUFreq driver support for Marvell
 	  Armada8k SOCs.
Signature · 1 line
2.25.1
author maintainer
#274 lore raw

PATCH 273/393 powerpc/pseries/hotplug-cpu: Remove double free in error path

In reply to Greg Kroah-Hartman

From: Nathan Lynch <[email protected]>

[ Upstream commit a0ff72f9f5a780341e7ff5e9ba50a0dad5fa1980 ]

In the unlikely event that the device tree lacks a /cpus node, find_dlpar_cpus_to_add() oddly frees the cpu_drcs buffer it has been passed before returning an error. Its only caller also frees the buffer on error.

Remove the less conventional kfree() of a caller-supplied buffer from find_dlpar_cpus_to_add().

Fixes 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality")
---
 arch/powerpc/platforms/pseries/hotplug-cpu.c | 1 -
 1 file changed, 1 deletion(-)
arch/powerpc/platforms/pseries/hotplug-cpu.c +0 -1
index d4b346355bb9e..6d4ee03d476a9 100644
@@ -739,7 +739,6 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
 	parent = of_find_node_by_path("/cpus");
 	if (!parent) {
 		pr_warn("Could not find CPU root node in device tree\n");
-		kfree(cpu_drcs);
 		return -1;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#275 lore raw

PATCH 274/393 selftests/powerpc: Fix online CPU selection

In reply to Greg Kroah-Hartman

From: Sandipan Das <[email protected]>

[ Upstream commit dfa03fff86027e58c8dba5c03ae68150d4e513ad ]

The size of the CPU affinity mask must be large enough for systems with a very large number of CPUs. Otherwise, tests which try to determine the first online CPU by calling sched_getaffinity() will fail. This makes sure that the size of the allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs_conf().

---
 tools/testing/selftests/powerpc/utils.c | 37 +++++++++++++++++--------
 1 file changed, 25 insertions(+), 12 deletions(-)
tools/testing/selftests/powerpc/utils.c +25 -12
index 5ee0e98c48967..eb530e73e02c1 100644
@@ -16,6 +16,7 @@
 #include <string.h>
 #include <sys/ioctl.h>
 #include <sys/stat.h>
+#include <sys/sysinfo.h>
 #include <sys/types.h>
 #include <sys/utsname.h>
 #include <unistd.h>
@@ -88,28 +89,40 @@ void *get_auxv_entry(int type)
 
 int pick_online_cpu(void)
 {
-	cpu_set_t mask;
-	int cpu;
+	int ncpus, cpu = -1;
+	cpu_set_t *mask;
+	size_t size;
+
+	ncpus = get_nprocs_conf();
+	size = CPU_ALLOC_SIZE(ncpus);
+	mask = CPU_ALLOC(ncpus);
+	if (!mask) {
+		perror("malloc");
+		return -1;
+	}
 
-	CPU_ZERO(&mask);
+	CPU_ZERO_S(size, mask);
 
-	if (sched_getaffinity(0, sizeof(mask), &mask)) {
+	if (sched_getaffinity(0, size, mask)) {
 		perror("sched_getaffinity");
-		return -1;
+		goto done;
 	}
 
 	/* We prefer a primary thread, but skip 0 */
-	for (cpu = 8; cpu < CPU_SETSIZE; cpu += 8)
-		if (CPU_ISSET(cpu, &mask))
-			return cpu;
+	for (cpu = 8; cpu < ncpus; cpu += 8)
+		if (CPU_ISSET_S(cpu, size, mask))
+			goto done;
 
 	/* Search for anything, but in reverse */
-	for (cpu = CPU_SETSIZE - 1; cpu >= 0; cpu--)
-		if (CPU_ISSET(cpu, &mask))
-			return cpu;
+	for (cpu = ncpus - 1; cpu >= 0; cpu--)
+		if (CPU_ISSET_S(cpu, size, mask))
+			goto done;
 
 	printf("No cpus in affinity mask?!\n");
-	return -1;
+
+done:
+	CPU_FREE(mask);
+	return cpu;
 }
 
 bool is_ppc64le(void)
Signature · 1 line
2.25.1
author maintainer
#276 lore raw

PATCH 275/393 ASoC: meson: axg-tdm-interface: fix link fmt setup

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit 6878ba91ce84f7a07887a0615af70f969508839f ]

The .set_fmt() callback of the axg tdm interface incorrectly test the content of SND_SOC_DAIFMT_MASTER_MASK as if it was a bitfield, which it is not.

Implement the test correctly.

Fixes d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
---
 sound/soc/meson/axg-tdm-interface.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)
sound/soc/meson/axg-tdm-interface.c +17 -9
index d51f3344be7c6..e25336f739123 100644
@@ -119,18 +119,25 @@ static int axg_tdm_iface_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai);
 
-	/* These modes are not supported */
-	if (fmt & (SND_SOC_DAIFMT_CBS_CFM | SND_SOC_DAIFMT_CBM_CFS)) {
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		if (!iface->mclk) {
+			dev_err(dai->dev, "cpu clock master: mclk missing\n");
+			return -ENODEV;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFM:
+		break;
+
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
 		dev_err(dai->dev, "only CBS_CFS and CBM_CFM are supported\n");
+		/* Fall-through */
+	default:
 		return -EINVAL;
 	}
 
-	/* If the TDM interface is the clock master, it requires mclk */
-	if (!iface->mclk && (fmt & SND_SOC_DAIFMT_CBS_CFS)) {
-		dev_err(dai->dev, "cpu clock master: mclk missing\n");
-		return -ENODEV;
-	}
-
 	iface->fmt = fmt;
 	return 0;
 }
@@ -319,7 +326,8 @@ static int axg_tdm_iface_hw_params(struct snd_pcm_substream *substream,
 	if (ret)
 		return ret;
 
-	if (iface->fmt & SND_SOC_DAIFMT_CBS_CFS) {
+	if ((iface->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
+	    SND_SOC_DAIFMT_CBS_CFS) {
 		ret = axg_tdm_iface_set_sclk(dai, params);
 		if (ret)
 			return ret;
Signature · 1 line
2.25.1
author maintainer
#277 lore raw

PATCH 276/393 ASoC: meson: axg-tdmin: fix g12a skew

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit 80a254394fcfe55450b0351da298ca7231889219 ]

After carefully checking the result provided by the TDMIN on the g12a and sm1 SoC families, the TDMIN skew offset appears to be 3 instead of 2 on the axg.

Fixes f01bc67f58fd ("ASoC: meson: axg-tdm-formatter: rework quirks settings")
---
 sound/soc/meson/axg-tdmin.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
sound/soc/meson/axg-tdmin.c +16 -0
index 973d4c02ef8db..3d002b4eb939e 100644
@@ -233,10 +233,26 @@ static const struct axg_tdm_formatter_driver axg_tdmin_drv = {
 	},
 };
 
+static const struct axg_tdm_formatter_driver g12a_tdmin_drv = {
+	.component_drv	= &axg_tdmin_component_drv,
+	.regmap_cfg	= &axg_tdmin_regmap_cfg,
+	.ops		= &axg_tdmin_ops,
+	.quirks		= &(const struct axg_tdm_formatter_hw) {
+		.invert_sclk	= false,
+		.skew_offset	= 3,
+	},
+};
+
 static const struct of_device_id axg_tdmin_of_match[] = {
 	{
 		.compatible = "amlogic,axg-tdmin",
 		.data = &axg_tdmin_drv,
+	}, {
+		.compatible = "amlogic,g12a-tdmin",
+		.data = &g12a_tdmin_drv,
+	}, {
+		.compatible = "amlogic,sm1-tdmin",
+		.data = &g12a_tdmin_drv,
 	}, {}
 };
 MODULE_DEVICE_TABLE(of, axg_tdmin_of_match);
Signature · 1 line
2.25.1
author maintainer
#278 lore raw

PATCH 277/393 ASoC: meson: axg-tdm-formatters: fix sclk inversion

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit 0d3f01dcdc234001f979a0af0b6b31cb9f25b6c1 ]

After carefully checking, it appears that both tdmout and tdmin require the rising edge of the sclk they get to be synchronized with the frame sync event (which should be a rising edge of lrclk).

TDMIN was improperly set before this patch. Remove the sclk_invert quirk which is no longer needed and fix the sclk phase.

Fixes 1a11d88f499c ("ASoC: meson: add tdm formatter base driver")
---
 sound/soc/meson/axg-tdm-formatter.c | 11 ++++++-----
 sound/soc/meson/axg-tdm-formatter.h |  1 -
 sound/soc/meson/axg-tdmin.c         |  2 --
 sound/soc/meson/axg-tdmout.c        |  3 ---
 4 files changed, 6 insertions(+), 11 deletions(-)
sound/soc/meson/axg-tdm-formatter.c +6 -5
index 358c8c0d861cd..f7e8e9da68a06 100644
@@ -70,7 +70,7 @@ EXPORT_SYMBOL_GPL(axg_tdm_formatter_set_channel_masks);
 static int axg_tdm_formatter_enable(struct axg_tdm_formatter *formatter)
 {
 	struct axg_tdm_stream *ts = formatter->stream;
-	bool invert = formatter->drv->quirks->invert_sclk;
+	bool invert;
 	int ret;
 
 	/* Do nothing if the formatter is already enabled */
@@ -96,11 +96,12 @@ static int axg_tdm_formatter_enable(struct axg_tdm_formatter *formatter)
 		return ret;
 
 	/*
-	 * If sclk is inverted, invert it back and provide the inversion
-	 * required by the formatter
+	 * If sclk is inverted, it means the bit should latched on the
+	 * rising edge which is what our HW expects. If not, we need to
+	 * invert it before the formatter.
 	 */
-	invert ^= axg_tdm_sclk_invert(ts->iface->fmt);
-	ret = clk_set_phase(formatter->sclk, invert ? 180 : 0);
+	invert = axg_tdm_sclk_invert(ts->iface->fmt);
+	ret = clk_set_phase(formatter->sclk, invert ? 0 : 180);
 	if (ret)
 		return ret;
 
sound/soc/meson/axg-tdm-formatter.h +0 -1
index 9ef98e955cb27..a1f0dcc0ff134 100644
@@ -16,7 +16,6 @@ struct snd_kcontrol;
 
 struct axg_tdm_formatter_hw {
 	unsigned int skew_offset;
-	bool invert_sclk;
 };
 
 struct axg_tdm_formatter_ops {
sound/soc/meson/axg-tdmin.c +0 -2
index 3d002b4eb939e..88ed95ae886bb 100644
@@ -228,7 +228,6 @@ static const struct axg_tdm_formatter_driver axg_tdmin_drv = {
 	.regmap_cfg	= &axg_tdmin_regmap_cfg,
 	.ops		= &axg_tdmin_ops,
 	.quirks		= &(const struct axg_tdm_formatter_hw) {
-		.invert_sclk	= false,
 		.skew_offset	= 2,
 	},
 };
@@ -238,7 +237,6 @@ static const struct axg_tdm_formatter_driver g12a_tdmin_drv = {
 	.regmap_cfg	= &axg_tdmin_regmap_cfg,
 	.ops		= &axg_tdmin_ops,
 	.quirks		= &(const struct axg_tdm_formatter_hw) {
-		.invert_sclk	= false,
 		.skew_offset	= 3,
 	},
 };
sound/soc/meson/axg-tdmout.c +0 -3
index 418ec314b37d4..3ceabddae629e 100644
@@ -238,7 +238,6 @@ static const struct axg_tdm_formatter_driver axg_tdmout_drv = {
 	.regmap_cfg	= &axg_tdmout_regmap_cfg,
 	.ops		= &axg_tdmout_ops,
 	.quirks		= &(const struct axg_tdm_formatter_hw) {
-		.invert_sclk = true,
 		.skew_offset = 1,
 	},
 };
@@ -248,7 +247,6 @@ static const struct axg_tdm_formatter_driver g12a_tdmout_drv = {
 	.regmap_cfg	= &axg_tdmout_regmap_cfg,
 	.ops		= &axg_tdmout_ops,
 	.quirks		= &(const struct axg_tdm_formatter_hw) {
-		.invert_sclk = true,
 		.skew_offset = 2,
 	},
 };
@@ -309,7 +307,6 @@ static const struct axg_tdm_formatter_driver sm1_tdmout_drv = {
 	.regmap_cfg	= &axg_tdmout_regmap_cfg,
 	.ops		= &axg_tdmout_ops,
 	.quirks		= &(const struct axg_tdm_formatter_hw) {
-		.invert_sclk = true,
 		.skew_offset = 2,
 	},
 };
Signature · 1 line
2.25.1
author maintainer
#279 lore raw

PATCH 278/393 ASoC: soc-core: Fix regression causing sysfs entries to disappear

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit 5c74c9d34aec1ac756de6979dd5580096aba8643 ]

The allocation order of things in soc_new_pcm_runtime was changed to move the device_register before the allocation of the rtd structure. This was to allow the rtd allocation to be managed by devm. However currently the sysfs entries are added by device_register and their visibility depends on variables within the rtd structure, this causes the pmdown_time and dapm_widgets sysfs entries to be missing for all rtds.

Correct this issue by manually calling device_add_groups after the appropriate information is available.

Fixes d918a37610b1 ("ASoC: soc-core: tidyup soc_new_pcm_runtime() alloc order")
---
 sound/soc/soc-core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
sound/soc/soc-core.c +4 -1
index e5433e8fcf19e..b5c4473f1e499 100644
@@ -443,7 +443,6 @@ static struct snd_soc_pcm_runtime *soc_new_pcm_runtime(
 
 	dev->parent	= card->dev;
 	dev->release	= soc_release_rtd_dev;
-	dev->groups	= soc_dev_attr_groups;
 
 	dev_set_name(dev, "%s", dai_link->name);
 
@@ -502,6 +501,10 @@ static struct snd_soc_pcm_runtime *soc_new_pcm_runtime(
 	rtd->num = card->num_rtd;
 	card->num_rtd++;
 
+	ret = device_add_groups(dev, soc_dev_attr_groups);
+	if (ret < 0)
+		goto free_rtd;
+
 	return rtd;
 
 free_rtd:
Signature · 1 line
2.25.1
author maintainer
#280 lore raw

PATCH 279/393 libbpf: Fix register in PT_REGS MIPS macros

In reply to Greg Kroah-Hartman

From: Jerry Crunchtime <[email protected]>

[ Upstream commit 1acf8f90ea7ee59006d0474275922145ac291331 ]

The o32, n32 and n64 calling conventions require the return value to be stored in $v0 which maps to $2 register, i.e., the register 2.

---
 tools/lib/bpf/bpf_tracing.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/lib/bpf/bpf_tracing.h +2 -2
index 48a9c7c69ef1f..e6ec7cb4aa4aa 100644
@@ -215,7 +215,7 @@ struct pt_regs;
 #define PT_REGS_PARM5(x) ((x)->regs[8])
 #define PT_REGS_RET(x) ((x)->regs[31])
 #define PT_REGS_FP(x) ((x)->regs[30]) /* Works only with CONFIG_FRAME_POINTER */
-#define PT_REGS_RC(x) ((x)->regs[1])
+#define PT_REGS_RC(x) ((x)->regs[2])
 #define PT_REGS_SP(x) ((x)->regs[29])
 #define PT_REGS_IP(x) ((x)->cp0_epc)
 
@@ -226,7 +226,7 @@ struct pt_regs;
 #define PT_REGS_PARM5_CORE(x) BPF_CORE_READ((x), regs[8])
 #define PT_REGS_RET_CORE(x) BPF_CORE_READ((x), regs[31])
 #define PT_REGS_FP_CORE(x) BPF_CORE_READ((x), regs[30])
-#define PT_REGS_RC_CORE(x) BPF_CORE_READ((x), regs[1])
+#define PT_REGS_RC_CORE(x) BPF_CORE_READ((x), regs[2])
 #define PT_REGS_SP_CORE(x) BPF_CORE_READ((x), regs[29])
 #define PT_REGS_IP_CORE(x) BPF_CORE_READ((x), cp0_epc)
 
Signature · 1 line
2.25.1
author maintainer
#281 lore raw

PATCH 280/393 ASoC: fsl_sai: Fix value of FSL_SAI_CR1_RFW_MASK

In reply to Greg Kroah-Hartman

From: Shengjiu Wang <[email protected]>

[ Upstream commit 5aef1ff2397d021f93d874b57dff032fdfac73de ]

The fifo_depth is 64 on i.MX8QM/i.MX8QXP, 128 on i.MX8MQ, 16 on i.MX7ULP.

Original FSL_SAI_CR1_RFW_MASK value 0x1F is not suitable for these platform, the FIFO watermark mask should be updated according to the fifo_depth.

Fixes a860fac42097 ("ASoC: fsl_sai: Add support for imx7ulp/imx8mq")
---
 sound/soc/fsl/fsl_sai.c | 5 +++--
 sound/soc/fsl/fsl_sai.h | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)
sound/soc/fsl/fsl_sai.c +3 -2
index 9d436b0c5718a..7031869a023a1 100644
@@ -680,10 +680,11 @@ static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
 	regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
 
 	regmap_update_bits(sai->regmap, FSL_SAI_TCR1(ofs),
-			   FSL_SAI_CR1_RFW_MASK,
+			   FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
 			   sai->soc_data->fifo_depth - FSL_SAI_MAXBURST_TX);
 	regmap_update_bits(sai->regmap, FSL_SAI_RCR1(ofs),
-			   FSL_SAI_CR1_RFW_MASK, FSL_SAI_MAXBURST_RX - 1);
+			   FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
+			   FSL_SAI_MAXBURST_RX - 1);
 
 	snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
 				&sai->dma_params_rx);
sound/soc/fsl/fsl_sai.h +1 -1
index 76b15deea80c7..6aba7d28f5f34 100644
@@ -94,7 +94,7 @@
 #define FSL_SAI_CSR_FRDE	BIT(0)
 
 /* SAI Transmit and Receive Configuration 1 Register */
-#define FSL_SAI_CR1_RFW_MASK	0x1f
+#define FSL_SAI_CR1_RFW_MASK(x)	((x) - 1)
 
 /* SAI Transmit and Receive Configuration 2 Register */
 #define FSL_SAI_CR2_SYNC	BIT(30)
Signature · 1 line
2.25.1
author maintainer
#282 lore raw

PATCH 281/393 s390/qeth: tolerate pre-filled RX buffer

In reply to Greg Kroah-Hartman

From: Julian Wiedmann <[email protected]>

[ Upstream commit eff73e16ee116f6eafa2be48fab42659a27cb453 ]

When preparing a buffer for RX refill, tolerate that it already has a pool_entry attached. Otherwise we could easily leak such a pool_entry when re-driving the RX refill after an error (from eg. do_qdio()).

This needs some minor adjustment in the code that drains RX buffer(s) prior to RX refill and during teardown, so that ->pool_entry is NULLed accordingly.

Fixes 4a71df50047f ("qeth: new qeth device driver")
---
 drivers/s390/net/qeth_core_main.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
drivers/s390/net/qeth_core_main.c +14 -6
index 60d675fefac7d..40ddd17864304 100644
@@ -202,12 +202,17 @@ EXPORT_SYMBOL_GPL(qeth_threads_running);
 void qeth_clear_working_pool_list(struct qeth_card *card)
 {
 	struct qeth_buffer_pool_entry *pool_entry, *tmp;
+	struct qeth_qdio_q *queue = card->qdio.in_q;
+	unsigned int i;
 
 	QETH_CARD_TEXT(card, 5, "clwrklst");
 	list_for_each_entry_safe(pool_entry, tmp,
 			    &card->qdio.in_buf_pool.entry_list, list){
 			list_del(&pool_entry->list);
 	}
+
+	for (i = 0; i < ARRAY_SIZE(queue->bufs); i++)
+		queue->bufs[i].pool_entry = NULL;
 }
 EXPORT_SYMBOL_GPL(qeth_clear_working_pool_list);
 
@@ -2671,7 +2676,7 @@ static struct qeth_buffer_pool_entry *qeth_find_free_buffer_pool_entry(
 static int qeth_init_input_buffer(struct qeth_card *card,
 		struct qeth_qdio_buffer *buf)
 {
-	struct qeth_buffer_pool_entry *pool_entry;
+	struct qeth_buffer_pool_entry *pool_entry = buf->pool_entry;
 	int i;
 
 	if ((card->options.cq == QETH_CQ_ENABLED) && (!buf->rx_skb)) {
@@ -2682,9 +2687,13 @@ static int qeth_init_input_buffer(struct qeth_card *card,
 			return -ENOMEM;
 	}
 
-	pool_entry = qeth_find_free_buffer_pool_entry(card);
-	if (!pool_entry)
-		return -ENOBUFS;
+	if (!pool_entry) {
+		pool_entry = qeth_find_free_buffer_pool_entry(card);
+		if (!pool_entry)
+			return -ENOBUFS;
+
+		buf->pool_entry = pool_entry;
+	}
 
 	/*
 	 * since the buffer is accessed only from the input_tasklet
@@ -2692,8 +2701,6 @@ static int qeth_init_input_buffer(struct qeth_card *card,
 	 * the QETH_IN_BUF_REQUEUE_THRESHOLD we should never run  out off
 	 * buffers
 	 */
-
-	buf->pool_entry = pool_entry;
 	for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) {
 		buf->buffer->element[i].length = PAGE_SIZE;
 		buf->buffer->element[i].addr =
@@ -5521,6 +5528,7 @@ static unsigned int qeth_rx_poll(struct qeth_card *card, int budget)
 		if (done) {
 			QETH_CARD_STAT_INC(card, rx_bufs);
 			qeth_put_buffer_pool_entry(card, buffer->pool_entry);
+			buffer->pool_entry = NULL;
 			qeth_queue_input_buffer(card, card->rx.b_index);
 			card->rx.b_count--;
 
Signature · 1 line
2.25.1
author maintainer
#283 lore raw

PATCH 282/393 s390/qeth: dont process empty bridge port events

In reply to Greg Kroah-Hartman

From: Julian Wiedmann <[email protected]>

[ Upstream commit 02472e28b9a45471c6d8729ff2c7422baa9be46a ]

Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage.

Fixes b4d72c08b358 ("qeth: bridgeport support - basic control")
---
 drivers/s390/net/qeth_l2_main.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/s390/net/qeth_l2_main.c +4 -0
index 0bd5b09e7a223..37740cc7a44aa 100644
@@ -1071,6 +1071,10 @@ static void qeth_bridge_state_change(struct qeth_card *card,
 	int extrasize;
 
 	QETH_CARD_TEXT(card, 2, "brstchng");
+	if (qports->num_entries == 0) {
+		QETH_CARD_TEXT(card, 2, "BPempty");
+		return;
+	}
 	if (qports->entry_length != sizeof(struct qeth_sbp_port_entry)) {
 		QETH_CARD_TEXT_(card, 2, "BPsz%04x", qports->entry_length);
 		return;
Signature · 1 line
2.25.1
author maintainer
#284 lore raw

PATCH 283/393 ice: Clear and free XLT entries on reset

In reply to Greg Kroah-Hartman

From: Vignesh Sridhar <[email protected]>

[ Upstream commit ec1d1d2302067e3ccbc4d0adcd36d72410933b70 ]

This fix has been added to address memory leak issues resulting from triggering a sudden driver reset which does not allow us to follow our normal removal flows for SW XLT entries for advanced features.

- Adding call to destroy flow profile locks when clearing SW XLT tables.

- Extraction sequence entries were not correctly cleared previously which could cause ownership conflicts for repeated reset-replay calls.

Fixes 31ad4e4ee1e4 ("ice: Allocate flow profile")
---
 drivers/net/ethernet/intel/ice/ice_flex_pipe.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_flex_pipe.c +3 -1
index abfec38bb4831..d60e31f65749f 100644
@@ -2291,6 +2291,8 @@ static void ice_free_flow_profs(struct ice_hw *hw, u8 blk_idx)
 	mutex_lock(&hw->fl_profs_locks[blk_idx]);
 	list_for_each_entry_safe(p, tmp, &hw->fl_profs[blk_idx], l_entry) {
 		list_del(&p->l_entry);
+
+		mutex_destroy(&p->entries_lock);
 		devm_kfree(ice_hw_to_dev(hw), p);
 	}
 	mutex_unlock(&hw->fl_profs_locks[blk_idx]);
@@ -2408,7 +2410,7 @@ void ice_clear_hw_tbls(struct ice_hw *hw)
 		memset(prof_redir->t, 0,
 		       prof_redir->count * sizeof(*prof_redir->t));
 
-		memset(es->t, 0, es->count * sizeof(*es->t));
+		memset(es->t, 0, es->count * sizeof(*es->t) * es->fvw);
 		memset(es->ref_count, 0, es->count * sizeof(*es->ref_count));
 		memset(es->written, 0, es->count * sizeof(*es->written));
 	}
Signature · 1 line
2.25.1
author maintainer
#285 lore raw

PATCH 284/393 ice: Graceful error handling in HW table calloc failure

In reply to Greg Kroah-Hartman

From: Surabhi Boob <[email protected]>

[ Upstream commit bcc46cb8a077c6189b44f1555b8659837f748eb2 ]

In the ice_init_hw_tbls, if the devm_kcalloc for es->written fails, catch that error and bail out gracefully, instead of continuing with a NULL pointer.

Fixes 32d63fa1e9f3 ("ice: Initialize DDP package structures")
---
 drivers/net/ethernet/intel/ice/ice_flex_pipe.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_flex_pipe.c +3 -1
index d60e31f65749f..a9a89bdb6036a 100644
@@ -2521,10 +2521,12 @@ enum ice_status ice_init_hw_tbls(struct ice_hw *hw)
 		es->ref_count = devm_kcalloc(ice_hw_to_dev(hw), es->count,
 					     sizeof(*es->ref_count),
 					     GFP_KERNEL);
+		if (!es->ref_count)
+			goto err;
 
 		es->written = devm_kcalloc(ice_hw_to_dev(hw), es->count,
 					   sizeof(*es->written), GFP_KERNEL);
-		if (!es->ref_count)
+		if (!es->written)
 			goto err;
 	}
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#286 lore raw

PATCH 285/393 netfilter: nft_meta: fix iifgroup matching

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

[ Upstream commit 78470d9d0d9f2f8d16f28382a4071568e839c0d5 ]

iifgroup matching erroneously checks the output interface.

Fixes 8724e819cc9a ("netfilter: nft_meta: move all interface related keys to helper")
---
 net/netfilter/nft_meta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/nft_meta.c +1 -1
index 951b6e87ed5d9..7bc6537f3ccb5 100644
@@ -253,7 +253,7 @@ static bool nft_meta_get_eval_ifname(enum nft_meta_keys key, u32 *dest,
 			return false;
 		break;
 	case NFT_META_IIFGROUP:
-		if (!nft_meta_store_ifgroup(dest, nft_out(pkt)))
+		if (!nft_meta_store_ifgroup(dest, nft_in(pkt)))
 			return false;
 		break;
 	case NFT_META_OIFGROUP:
Signature · 1 line
2.25.1
author maintainer
#287 lore raw

PATCH 286/393 rtw88: fix LDPC field for RA info

In reply to Greg Kroah-Hartman

From: Tsang-Shian Lin <[email protected]>

[ Upstream commit ae44fa993e8e6c1a1d22e5ca03d9eadd53b2745b ]

Convert the type of LDPC field to boolen because LDPC field of RA info H2C command to firmware
is only one bit.

---
 drivers/net/wireless/realtek/rtw88/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/realtek/rtw88/fw.c +1 -1
index 05c430b3489cb..917decdbfb729 100644
@@ -444,7 +444,7 @@ void rtw_fw_send_ra_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 	SET_RA_INFO_INIT_RA_LVL(h2c_pkt, si->init_ra_lv);
 	SET_RA_INFO_SGI_EN(h2c_pkt, si->sgi_enable);
 	SET_RA_INFO_BW_MODE(h2c_pkt, si->bw_mode);
-	SET_RA_INFO_LDPC(h2c_pkt, si->ldpc_en);
+	SET_RA_INFO_LDPC(h2c_pkt, !!si->ldpc_en);
 	SET_RA_INFO_NO_UPDATE(h2c_pkt, no_update);
 	SET_RA_INFO_VHT_EN(h2c_pkt, si->vht_enable);
 	SET_RA_INFO_DIS_PT(h2c_pkt, disable_pt);
Signature · 1 line
2.25.1
author maintainer
#288 lore raw

PATCH 287/393 rtw88: fix short GI capability based on current bandwidth

In reply to Greg Kroah-Hartman

From: Tsang-Shian Lin <[email protected]>

[ Upstream commit 4dd86b901d1373ef8446ecb50a7ca009f3475211 ]

Fix the transmission is not sent with short GI under some conditions even if the receiver supports short GI. If VHT capability IE exists in the beacon, the original code uses the short GI for 80M field as driver's short GI setting for transmission, even the current bandwidth is not 80MHz.

Short GI supported fields for 20M/40M are informed in HT capability information element, and short GI supported field for 80M is informed in VHT capability information element.

These three fields may be set to different values. Driver needs to record each short GI support field for each bandwidth, and send correct info depends on current bandwidth to the WiFi firmware.

---
 drivers/net/wireless/realtek/rtw88/main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/net/wireless/realtek/rtw88/main.c +6 -5
index 7640e97706f52..72fe026e8a3c9 100644
@@ -703,8 +703,6 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 			stbc_en = VHT_STBC_EN;
 		if (sta->vht_cap.cap & IEEE80211_VHT_CAP_RXLDPC)
 			ldpc_en = VHT_LDPC_EN;
-		if (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80)
-			is_support_sgi = true;
 	} else if (sta->ht_cap.ht_supported) {
 		ra_mask |= (sta->ht_cap.mcs.rx_mask[1] << 20) |
 			   (sta->ht_cap.mcs.rx_mask[0] << 12);
@@ -712,9 +710,6 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 			stbc_en = HT_STBC_EN;
 		if (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING)
 			ldpc_en = HT_LDPC_EN;
-		if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20 ||
-		    sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40)
-			is_support_sgi = true;
 	}
 
 	if (efuse->hw_cap.nss == 1)
@@ -756,12 +751,18 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 	switch (sta->bandwidth) {
 	case IEEE80211_STA_RX_BW_80:
 		bw_mode = RTW_CHANNEL_WIDTH_80;
+		is_support_sgi = sta->vht_cap.vht_supported &&
+				 (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80);
 		break;
 	case IEEE80211_STA_RX_BW_40:
 		bw_mode = RTW_CHANNEL_WIDTH_40;
+		is_support_sgi = sta->ht_cap.ht_supported &&
+				 (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40);
 		break;
 	default:
 		bw_mode = RTW_CHANNEL_WIDTH_20;
+		is_support_sgi = sta->ht_cap.ht_supported &&
+				 (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20);
 		break;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#289 lore raw

PATCH 288/393 rtw88: coex: only skip coex triggered by BT info

In reply to Greg Kroah-Hartman

From: Yan-Hsuan Chuang <[email protected]>

[ Upstream commit 3f194bd4ca1cd9b8eef34d37d562279dbeb80319 ]

The coex mechanism used to skip upon the freeze flag is raised. That will cause the coex mechanism being skipped unexpectedly. Coex only wanted to keep the TDMA table from being changed by BT side.

So, check the freeze and reason, if the coex reason is coming from BT info, skip it, to make sure the coex triggered by Wifi itself can work.

This is required for the AP mode, while the control flow is different with STA mode. When starting an AP mode, the AP mode needs to start working immedaitely after leaving IPS, and the freeze flag could be raised. If the coex info is skipped, then the AP mode will not set the antenna owner, leads to TX stuck.

Fixes 4136214f7c46 ("rtw88: add BT co-existence support")
---
 drivers/net/wireless/realtek/rtw88/coex.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/realtek/rtw88/coex.c +2 -1
index 567372fb4e12e..c73101afbeddb 100644
@@ -1920,7 +1920,8 @@ static void rtw_coex_run_coex(struct rtw_dev *rtwdev, u8 reason)
 	if (coex_stat->wl_under_ips)
 		return;
 
-	if (coex->freeze && !coex_stat->bt_setup_link)
+	if (coex->freeze && coex_dm->reason == COEX_RSN_BTINFO &&
+	    !coex_stat->bt_setup_link)
 		return;
 
 	coex_stat->cnt_wl[COEX_CNT_WL_COEXRUN]++;
Signature · 1 line
2.25.1
author maintainer
#290 lore raw

PATCH 289/393 qtnfmac: Missing platform_device_unregister() on error in qtnf_core_mac_alloc()

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 141bc9abbbffa89d020957caa9ac4a61d0ef1e26 ]

Add the missing platform_device_unregister() before return from qtnf_core_mac_alloc() in the error handling case.

Fixes 616f5701f4ab ("qtnfmac: assign each wiphy to its own virtual platform device")
---
 drivers/net/wireless/quantenna/qtnfmac/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/quantenna/qtnfmac/core.c +4 -1
index eea777f8acea5..6aafff9d4231b 100644
@@ -446,8 +446,11 @@ static struct qtnf_wmac *qtnf_core_mac_alloc(struct qtnf_bus *bus,
 	}
 
 	wiphy = qtnf_wiphy_allocate(bus, pdev);
-	if (!wiphy)
+	if (!wiphy) {
+		if (pdev)
+			platform_device_unregister(pdev);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	mac = wiphy_priv(wiphy);
 
Signature · 1 line
2.25.1
author maintainer
#291 lore raw

PATCH 290/393 wl1251: fix always return 0 error

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 20e6421344b5bc2f97b8e2db47b6994368417904 ]

wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'.

---
 drivers/net/wireless/ti/wl1251/event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ti/wl1251/event.c +1 -1
index 850864dbafa11..e6d426edab56b 100644
@@ -70,7 +70,7 @@ static int wl1251_event_ps_report(struct wl1251 *wl,
 		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void wl1251_event_mbox_dump(struct event_mailbox *mbox)
Signature · 1 line
2.25.1
author maintainer
#292 lore raw

PATCH 291/393 tools, build: Propagate build failures from tools/build/Makefile.build

In reply to Greg Kroah-Hartman

From: Andrii Nakryiko <[email protected]>

[ Upstream commit a278f3d8191228212c553a5d4303fa603214b717 ]

The '&&' command seems to have a bad effect when $(cmd_$(1)) exits with non-zero effect: the command failure is masked (despite set -e) and all but the first command of $(dep-cmd) is executed (successfully, as they are mostly printfs), thus overall returning 0 in the end.

This means in practice that despite compilation errors, tools's build Makefile will return success. We see this very reliably with libbpf's Makefile, which doesn't get compilation error propagated properly. This in turns causes issues with selftests build, as well as bpftool and other projects that rely on building libbpf.

The fix is simple: don't use &&. Given set -e, we don't need to chain commands with &&. The shell will exit on first failure, giving desired behavior and propagating error properly.

Fixes 275e2d95591e ("tools build: Move dependency copy into function")
---
 tools/build/Build.include | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/build/Build.include +2 -1
index 9ec01f4454f9f..585486e40995b 100644
@@ -74,7 +74,8 @@ dep-cmd = $(if $(wildcard $(fixdep)),
 #                   dependencies in the cmd file
 if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)),         \
                   @set -e;                                         \
-                  $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
+                  $(echo-cmd) $(cmd_$(1));                         \
+                  $(dep-cmd))
 
 # if_changed      - execute command if any prerequisite is newer than
 #                   target, or command line has changed
Signature · 1 line
2.25.1
author maintainer
#293 lore raw

PATCH 292/393 tools, bpftool: Fix wrong return value in do_dump()

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit 041549b7b2c7811ec40e705c439211f00ade2dda ]

In case of btf_id does not exist, a negative error code -ENOENT should be returned.

---
 tools/bpf/bpftool/btf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/bpf/bpftool/btf.c +1 -1
index bcaf55b594982..81a77475bea61 100644
@@ -597,7 +597,7 @@ static int do_dump(int argc, char **argv)
 			goto done;
 		}
 		if (!btf) {
-			err = ENOENT;
+			err = -ENOENT;
 			p_err("can't find btf with ID (%u)", btf_id);
 			goto done;
 		}
Signature · 1 line
2.25.1
author maintainer
#294 lore raw

PATCH 293/393 net/mlx5: DR, Change push vlan action sequence

In reply to Greg Kroah-Hartman

From: Alex Vesker <[email protected]>

[ Upstream commit b206490940216542c68563699b279eed3c55107c ]

The DR TX state machine supports the following order:
modify header, push vlan and encapsulation. Instead fs_dr would pass:
push vlan, modify header and encapsulation.

The above caused the rule creation to fail on invalid action sequence provided error.

Fixes 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation")
---
 .../mellanox/mlx5/core/steering/fs_dr.c       | 42 +++++++++----------
 1 file changed, 21 insertions(+), 21 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c +21 -21
index 3b3f5b9d4f950..2f3ee8519b226 100644
@@ -279,29 +279,9 @@ static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns,
 
 	/* The order of the actions are must to be keep, only the following
 	 * order is supported by SW steering:
-	 * TX: push vlan -> modify header -> encap
+	 * TX: modify header -> push vlan -> encap
 	 * RX: decap -> pop vlan -> modify header
 	 */
-	if (fte->action.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH) {
-		tmp_action = create_action_push_vlan(domain, &fte->action.vlan[0]);
-		if (!tmp_action) {
-			err = -ENOMEM;
-			goto free_actions;
-		}
-		fs_dr_actions[fs_dr_num_actions++] = tmp_action;
-		actions[num_actions++] = tmp_action;
-	}
-
-	if (fte->action.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2) {
-		tmp_action = create_action_push_vlan(domain, &fte->action.vlan[1]);
-		if (!tmp_action) {
-			err = -ENOMEM;
-			goto free_actions;
-		}
-		fs_dr_actions[fs_dr_num_actions++] = tmp_action;
-		actions[num_actions++] = tmp_action;
-	}
-
 	if (fte->action.action & MLX5_FLOW_CONTEXT_ACTION_DECAP) {
 		enum mlx5dr_action_reformat_type decap_type =
 			DR_ACTION_REFORMAT_TYP_TNL_L2_TO_L2;
@@ -354,6 +334,26 @@ static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns,
 		actions[num_actions++] =
 			fte->action.modify_hdr->action.dr_action;
 
+	if (fte->action.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH) {
+		tmp_action = create_action_push_vlan(domain, &fte->action.vlan[0]);
+		if (!tmp_action) {
+			err = -ENOMEM;
+			goto free_actions;
+		}
+		fs_dr_actions[fs_dr_num_actions++] = tmp_action;
+		actions[num_actions++] = tmp_action;
+	}
+
+	if (fte->action.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2) {
+		tmp_action = create_action_push_vlan(domain, &fte->action.vlan[1]);
+		if (!tmp_action) {
+			err = -ENOMEM;
+			goto free_actions;
+		}
+		fs_dr_actions[fs_dr_num_actions++] = tmp_action;
+		actions[num_actions++] = tmp_action;
+	}
+
 	if (delay_encap_set)
 		actions[num_actions++] =
 			fte->action.pkt_reformat->action.dr_action;
Signature · 1 line
2.25.1
author maintainer
#295 lore raw

PATCH 294/393 net/mlx5: Delete extra dump stack that gives nothing

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit 6c4e9bcfb48933d533ff975e152757991556294a ]

The WARN_*() macros are intended to catch impossible situations from the SW point of view. They gave a little in case HW<->SW interface is out-of-sync.

Such out-of-sync scenario can be due to SW errors that are not part of this flow or because some HW errors, where dump stack won't help either.

This specific WARN_ON() is useless because mlx5_core code is prepared to handle such situations and will unfold everything correctly while providing enough information to the users to understand why FS is not working.

WARNING: CPU: 0 PID: 3222 at drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 connect_fts_in_prio.isra.20+0x1dd/0x260 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 3222 Comm: syz-executor861 Not tainted 5.5.0-rc6+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack linux/lib/dump_stack.c:77 [inline]
 dump_stack+0x94/0xce linux/lib/dump_stack.c:118
 panic+0x234/0x56f linux/kernel/panic.c:221
 __warn+0x1cc/0x1e1 linux/kernel/panic.c:582
 report_bug+0x200/0x310 linux/lib/bug.c:195
 fixup_bug.part.11+0x32/0x80 linux/arch/x86/kernel/traps.c:174
 fixup_bug linux/arch/x86/kernel/traps.c:273 [inline]
 do_error_trap+0xd3/0x100 linux/arch/x86/kernel/traps.c:267
 do_invalid_op+0x31/0x40 linux/arch/x86/kernel/traps.c:286
 invalid_op+0x1e/0x30 linux/arch/x86/entry/entry_64.S:1027
RIP: 0010:connect_fts_in_prio.isra.20+0x1dd/0x260
linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825
Code: 00 00 48 c7 c2 60 8c 31 84 48 c7 c6 00 81 31 84 48 8b 38 e8 3c a8

cb ff 41 83 fd 01 8b 04 24 0f 8e 29 ff ff ff e8 83 7b bc fe <0f> 0b 8b 04 24 e9 1a ff ff ff 89 04 24 e8 c1 20 e0 fe 8b 04 24 eb
RSP: 0018:ffffc90004bb7858 EFLAGS: 00010293
RAX: ffff88805de98e80 RBX: 0000000000000c96 RCX: ffffffff827a853d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: fffff52000976efa
RBP: 0000000000000007 R08: ffffed100da060e3 R09: ffffed100da060e3
R10: 0000000000000001 R11: ffffed100da060e2 R12: dffffc0000000000
R13: 0000000000000002 R14: ffff8880683a1a10 R15: ffffed100d07bc1c

 connect_prev_fts linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:844 [inline]
 connect_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:975 [inline]
 __mlx5_create_flow_table+0x8f8/0x1710 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1064
 mlx5_create_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1094 [inline]
 mlx5_create_auto_grouped_flow_table+0xe1/0x210 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1136
 _get_prio linux/drivers/infiniband/hw/mlx5/main.c:3286 [inline]
 get_flow_table+0x2ea/0x760 linux/drivers/infiniband/hw/mlx5/main.c:3376
 mlx5_ib_create_flow+0x331/0x11c0 linux/drivers/infiniband/hw/mlx5/main.c:3896
 ib_uverbs_ex_create_flow+0x13e8/0x1b40 linux/drivers/infiniband/core/uverbs_cmd.c:3311
 ib_uverbs_write+0xaa5/0xdf0 linux/drivers/infiniband/core/uverbs_main.c:769
 __vfs_write+0x7c/0x100 linux/fs/read_write.c:494
 vfs_write+0x168/0x4a0 linux/fs/read_write.c:558
 ksys_write+0xc8/0x200 linux/fs/read_write.c:611
 do_syscall_64+0x9c/0x390 linux/arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a059
Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89

f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcc17564c98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fcc17564ca0 RCX: 000000000045a059
RDX: 0000000000000030 RSI: 00000000200003c0 RDI: 0000000000000005
RBP: 0000000000000007 R08: 0000000000000002 R09: 0000000000003131
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006e636c
R13: 0000000000000000 R14: 00000000006e6360 R15: 00007ffdcbdaf6a0 Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 1 seconds..

Fixes f90edfd279f3 ("net/mlx5_core: Connect flow tables")
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +3 -6
index 9620c8650e13d..43cd379c46f33 100644
@@ -829,18 +829,15 @@ static int connect_fts_in_prio(struct mlx5_core_dev *dev,
 {
 	struct mlx5_flow_root_namespace *root = find_root(&prio->node);
 	struct mlx5_flow_table *iter;
-	int i = 0;
 	int err;
 
 	fs_for_each_ft(iter, prio) {
-		i++;
 		err = root->cmds->modify_flow_table(root, iter, ft);
 		if (err) {
-			mlx5_core_warn(dev, "Failed to modify flow table %d\n",
-				       iter->id);
+			mlx5_core_err(dev,
+				      "Failed to modify flow table id %d, type %d, err %d\n",
+				      iter->id, iter->type, err);
 			/* The driver is out of sync with the FW */
-			if (i > 1)
-				WARN_ON(true);
 			return err;
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#296 lore raw

PATCH 295/393 ftrace: Fix ftrace_trace_task return value

In reply to Greg Kroah-Hartman

From: Josef Bacik <[email protected]>

[ Upstream commit c58b6b0372de0d4cd0536d6585addd1b36b151ae ]

I was attempting to use pid filtering with function_graph, but it wasn't allowing anything to make it through. Turns out ftrace_trace_task returns false if ftrace_ignore_pid is not-empty, which isn't correct anymore. We're now setting it to FTRACE_PID_IGNORE if we need to ignore that pid, otherwise it's set to the pid (which is weird considering the name) or to FTRACE_PID_TRACE. Fix the check to check for != FTRACE_PID_IGNORE. With this we can now use function_graph with pid filtering.

Fixes 717e3f5ebc82 ("ftrace: Make function trace pid filtering a bit more exact")
---
 kernel/trace/ftrace.c | 3 ---
 kernel/trace/trace.h  | 7 ++++++-
 2 files changed, 6 insertions(+), 4 deletions(-)
kernel/trace/ftrace.c +0 -3
index bd030b1b95148..baa7c050dc7bc 100644
@@ -139,9 +139,6 @@ static inline void ftrace_ops_init(struct ftrace_ops *ops)
 #endif
 }
 
-#define FTRACE_PID_IGNORE	-1
-#define FTRACE_PID_TRACE	-2
-
 static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip,
 			    struct ftrace_ops *op, struct pt_regs *regs)
 {
kernel/trace/trace.h +6 -1
index 09298ce5f805b..6b9acbf95cbc9 100644
@@ -1103,6 +1103,10 @@ print_graph_function_flags(struct trace_iterator *iter, u32 flags)
 extern struct list_head ftrace_pids;
 
 #ifdef CONFIG_FUNCTION_TRACER
+
+#define FTRACE_PID_IGNORE	-1
+#define FTRACE_PID_TRACE	-2
+
 struct ftrace_func_command {
 	struct list_head	list;
 	char			*name;
@@ -1114,7 +1118,8 @@ struct ftrace_func_command {
 extern bool ftrace_filter_param __initdata;
 static inline int ftrace_trace_task(struct trace_array *tr)
 {
-	return !this_cpu_read(tr->array_buffer.data->ftrace_ignore_pid);
+	return this_cpu_read(tr->array_buffer.data->ftrace_ignore_pid) !=
+		FTRACE_PID_IGNORE;
 }
 extern int ftrace_is_dead(void);
 int ftrace_create_function_files(struct trace_array *tr,
Signature · 1 line
2.25.1
author maintainer
#297 lore raw

PATCH 296/393 net: ethernet: aquantia: Fix wrong return value

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit 0470a48880f8bc42ce26962b79c7b802c5a695ec ]

In function hw_atl_a0_hw_multicast_list_set(), when an invalid request is encountered, a negative error code should be returned.

Fixes bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions")
Cc David VomLehn <[email protected]>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +1 -1
index 9b1062b8af640..1e8b778cb9fa2 100644
@@ -782,7 +782,7 @@ static int hw_atl_a0_hw_multicast_list_set(struct aq_hw_s *self,
 	int err = 0;
 
 	if (count > (HW_ATL_A0_MAC_MAX - HW_ATL_A0_MAC_MIN)) {
-		err = EBADRQC;
+		err = -EBADRQC;
 		goto err_exit;
 	}
 	for (self->aq_nic_cfg->mc_list_count = 0U;
Signature · 1 line
2.25.1
author maintainer
#298 lore raw

PATCH 297/393 liquidio: Fix wrong return value in cn23xx_get_pf_num()

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit aa027850a292ea65524b8fab83eb91a124ad362c ]

On an error exit path, a negative error code should be returned instead of a positive return value.

Fixes 0c45d7fe12c7e ("liquidio: fix use of pf in pass-through mode in a virtual machine")
Cc Rick Farrington <[email protected]>
---
 drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c +1 -1
index 43d11c38b38a9..4cddd628d41b2 100644
@@ -1167,7 +1167,7 @@ static int cn23xx_get_pf_num(struct octeon_device *oct)
 		oct->pf_num = ((fdl_bit >> CN23XX_PCIE_SRIOV_FDL_BIT_POS) &
 			       CN23XX_PCIE_SRIOV_FDL_MASK);
 	} else {
-		ret = EINVAL;
+		ret = -EINVAL;
 
 		/* Under some virtual environments, extended PCI regs are
 		 * inaccessible, in which case the above read will have failed.
Signature · 1 line
2.25.1
author maintainer
#299 lore raw

PATCH 298/393 net: sgi: ioc3-eth: Fix the size used in some dma_free_coherent() calls

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit edab74e9cb1d073c70add0f9b75e17aebf0598ff ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'.

Fixes 369a782af0f1 ("net: sgi: ioc3-eth: ensure tx ring is 16k aligned.")
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/sgi/ioc3-eth.c +2 -2
index 6646eba9f57fe..6eef0f45b133b 100644
@@ -951,7 +951,7 @@ static int ioc3eth_probe(struct platform_device *pdev)
 		dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr,
 				  ip->rxr_dma);
 	if (ip->tx_ring)
-		dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->tx_ring,
+		dma_free_coherent(ip->dma_dev, TX_RING_SIZE + SZ_16K - 1, ip->tx_ring,
 				  ip->txr_dma);
 out_free:
 	free_netdev(dev);
@@ -964,7 +964,7 @@ static int ioc3eth_remove(struct platform_device *pdev)
 	struct ioc3_private *ip = netdev_priv(dev);
 
 	dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr, ip->rxr_dma);
-	dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->tx_ring, ip->txr_dma);
+	dma_free_coherent(ip->dma_dev, TX_RING_SIZE + SZ_16K - 1, ip->tx_ring, ip->txr_dma);
 
 	unregister_netdev(dev);
 	del_timer_sync(&ip->ioc3_timer);
Signature · 1 line
2.25.1
author maintainer
#300 lore raw

PATCH 299/393 net: spider_net: Fix the size used in a dma_free_coherent() call

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 36f28f7687a9ce665479cce5d64ce7afaa9e77ae ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'.

Fixes d4ed8f8d1fb7 ("Spidernet DMA coalescing")
---
 drivers/net/ethernet/toshiba/spider_net.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/toshiba/spider_net.c +2 -2
index 6576271642c14..ce8b123cdbcc1 100644
@@ -283,8 +283,8 @@ spider_net_free_chain(struct spider_net_card *card,
 		descr = descr->next;
 	} while (descr != chain->ring);
 
-	dma_free_coherent(&card->pdev->dev, chain->num_desc,
-	    chain->hwring, chain->dma_addr);
+	dma_free_coherent(&card->pdev->dev, chain->num_desc * sizeof(struct spider_net_hw_descr),
+			  chain->hwring, chain->dma_addr);
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#301 lore raw

PATCH 300/393 fsl/fman: use 32-bit unsigned integer

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit 99f47abd9f7bf6e365820d355dc98f6955a562df ]

Potentially overflowing expression (ts_freq << 16 and intgr << 16) declared as type u32 (32-bit unsigned) is evaluated using 32-bit arithmetic and then used in a context that expects an expression of type u64 (64-bit unsigned) which ultimately is used as 16-bit unsigned by typecasting to u16. Fixed by using an unsigned 32-bit integer since the value is truncated anyway in the end.

Fixes 414fd46e7762 ("fsl/fman: Add FMan support")
---
 drivers/net/ethernet/freescale/fman/fman.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/freescale/fman/fman.c +1 -2
index f151d6e111dd9..ef67e8599b393 100644
@@ -1398,8 +1398,7 @@ static void enable_time_stamp(struct fman *fman)
 {
 	struct fman_fpm_regs __iomem *fpm_rg = fman->fpm_regs;
 	u16 fm_clk_freq = fman->state->fm_clk_freq;
-	u32 tmp, intgr, ts_freq;
-	u64 frac;
+	u32 tmp, intgr, ts_freq, frac;
 
 	ts_freq = (u32)(1 << fman->state->count1_micro_bit);
 	/* configure timestamp so that bit 8 will count 1 microsecond
Signature · 1 line
2.25.1
author maintainer
#302 lore raw

PATCH 301/393 fsl/fman: fix dereference null return value

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit 0572054617f32670abab4b4e89a876954d54b704 ]

Check before using returned value to avoid dereferencing null pointer.

Fixes 18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
---
 drivers/net/ethernet/freescale/fman/fman_port.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/net/ethernet/freescale/fman/fman_port.c +8 -1
index 87b26f063cc82..c27df153f8959 100644
@@ -1767,6 +1767,7 @@ static int fman_port_probe(struct platform_device *of_dev)
 	struct fman_port *port;
 	struct fman *fman;
 	struct device_node *fm_node, *port_node;
+	struct platform_device *fm_pdev;
 	struct resource res;
 	struct resource *dev_res;
 	u32 val;
@@ -1791,8 +1792,14 @@ static int fman_port_probe(struct platform_device *of_dev)
 		goto return_err;
 	}
 
-	fman = dev_get_drvdata(&of_find_device_by_node(fm_node)->dev);
+	fm_pdev = of_find_device_by_node(fm_node);
 	of_node_put(fm_node);
+	if (!fm_pdev) {
+		err = -EINVAL;
+		goto return_err;
+	}
+
+	fman = dev_get_drvdata(&fm_pdev->dev);
 	if (!fman) {
 		err = -EINVAL;
 		goto return_err;
Signature · 1 line
2.25.1
author maintainer
#303 lore raw

PATCH 302/393 fsl/fman: fix unreachable code

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit cc79fd8f557767de90ff199d3b6fb911df43160a ]

The parameter 'priority' is incorrectly forced to zero which ultimately induces logically dead code in the subsequent lines.

Fixes 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
---
 drivers/net/ethernet/freescale/fman/fman_memac.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/ethernet/freescale/fman/fman_memac.c +0 -1
index a5500ede40703..bb02b37422cc2 100644
@@ -852,7 +852,6 @@ int memac_set_tx_pause_frames(struct fman_mac *memac, u8 priority,
 
 	tmp = ioread32be(&regs->command_config);
 	tmp &= ~CMD_CFG_PFC_MODE;
-	priority = 0;
 
 	iowrite32be(tmp, &regs->command_config);
 
Signature · 1 line
2.25.1
author maintainer
#304 lore raw

PATCH 303/393 fsl/fman: check dereferencing null pointer

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit cc5d229a122106733a85c279d89d7703f21e4d4f ]

Add a safe check to avoid dereferencing null pointer

Fixes 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
---
 drivers/net/ethernet/freescale/fman/fman_dtsec.c | 4 ++--
 drivers/net/ethernet/freescale/fman/fman_memac.c | 2 +-
 drivers/net/ethernet/freescale/fman/fman_tgec.c  | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/freescale/fman/fman_dtsec.c +2 -2
index 004c266802a87..bce3c9398887c 100644
@@ -1200,7 +1200,7 @@ int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr)
 		list_for_each(pos,
 			      &dtsec->multicast_addr_hash->lsts[bucket]) {
 			hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-			if (hash_entry->addr == addr) {
+			if (hash_entry && hash_entry->addr == addr) {
 				list_del_init(&hash_entry->node);
 				kfree(hash_entry);
 				break;
@@ -1213,7 +1213,7 @@ int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr)
 		list_for_each(pos,
 			      &dtsec->unicast_addr_hash->lsts[bucket]) {
 			hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-			if (hash_entry->addr == addr) {
+			if (hash_entry && hash_entry->addr == addr) {
 				list_del_init(&hash_entry->node);
 				kfree(hash_entry);
 				break;
drivers/net/ethernet/freescale/fman/fman_memac.c +1 -1
index bb02b37422cc2..645764abdaae5 100644
@@ -981,7 +981,7 @@ int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr)
 
 	list_for_each(pos, &memac->multicast_addr_hash->lsts[hash]) {
 		hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-		if (hash_entry->addr == addr) {
+		if (hash_entry && hash_entry->addr == addr) {
 			list_del_init(&hash_entry->node);
 			kfree(hash_entry);
 			break;
drivers/net/ethernet/freescale/fman/fman_tgec.c +1 -1
index 8c7eb878d5b43..41946b16f6c72 100644
@@ -626,7 +626,7 @@ int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr)
 
 	list_for_each(pos, &tgec->multicast_addr_hash->lsts[hash]) {
 		hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-		if (hash_entry->addr == addr) {
+		if (hash_entry && hash_entry->addr == addr) {
 			list_del_init(&hash_entry->node);
 			kfree(hash_entry);
 			break;
Signature · 1 line
2.25.1
author maintainer
#305 lore raw

PATCH 304/393 fsl/fman: fix eth hash table allocation

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit 3207f715c34317d08e798e11a10ce816feb53c0f ]

Fix memory allocation for ethernet address hash table. The code was wrongly allocating an array for eth hash table which is incorrect because this is the main structure for eth hash table (struct eth_hash_t) that contains inside a number of elements.

Fixes 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
---
 drivers/net/ethernet/freescale/fman/fman_mac.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/fman/fman_mac.h +1 -1
index dd6d0526f6c1f..19f327efdaff3 100644
@@ -252,7 +252,7 @@ static inline struct eth_hash_t *alloc_hash_table(u16 size)
 	struct eth_hash_t *hash;
 
 	/* Allocate address hash table */
-	hash = kmalloc_array(size, sizeof(struct eth_hash_t *), GFP_KERNEL);
+	hash = kmalloc(sizeof(*hash), GFP_KERNEL);
 	if (!hash)
 		return NULL;
 
Signature · 1 line
2.25.1
author maintainer
#306 lore raw

PATCH 305/393 gpio: dont use same lockdep class for all devm_gpiochip_add_data users

In reply to Greg Kroah-Hartman

From: Ahmad Fatoum <[email protected]>

[ Upstream commit 5f402bb17533113c21d61c2d4bc4ef4a6fa1c9a5 ]

Commit 959bc7b22bd2 ("gpio: Automatically add lockdep keys") documents in its commits message its intention to "create a unique class key for each driver".

It does so by having gpiochip_add_data add in-place the definition of two static lockdep classes for LOCKDEP use. That way, every caller of the macro adds their gpiochip with unique lockdep classes.

There are many indirect callers of gpiochip_add_data, however, via use of devm_gpiochip_add_data. devm_gpiochip_add_data has external linkage and all its users will share the same lockdep classes, which probably is not intended.

Fix this by replicating the gpio_chip_add_data statics-in-macro for the devm_ version as well.

---
 drivers/gpio/gpiolib-devres.c | 13 ++++++++-----
 include/linux/gpio/driver.h   | 13 +++++++++++--
 2 files changed, 19 insertions(+), 7 deletions(-)
drivers/gpio/gpiolib-devres.c +8 -5
index 5c91c4365da1f..7dbce4c4ebdf4 100644
@@ -487,10 +487,12 @@ static void devm_gpio_chip_release(struct device *dev, void *res)
 }
 
 /**
- * devm_gpiochip_add_data() - Resource managed gpiochip_add_data()
+ * devm_gpiochip_add_data_with_key() - Resource managed gpiochip_add_data_with_key()
  * @dev: pointer to the device that gpio_chip belongs to.
  * @gc: the GPIO chip to register
  * @data: driver-private data associated with this chip
+ * @lock_key: lockdep class for IRQ lock
+ * @request_key: lockdep class for IRQ request
  *
  * Context: potentially before irqs will work
  *
@@ -501,8 +503,9 @@ static void devm_gpio_chip_release(struct device *dev, void *res)
  * gc->base is invalid or already associated with a different chip.
  * Otherwise it returns zero as a success code.
  */
-int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *gc,
-			   void *data)
+int devm_gpiochip_add_data_with_key(struct device *dev, struct gpio_chip *gc, void *data,
+				    struct lock_class_key *lock_key,
+				    struct lock_class_key *request_key)
 {
 	struct gpio_chip **ptr;
 	int ret;
@@ -512,7 +515,7 @@ int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *gc,
 	if (!ptr)
 		return -ENOMEM;
 
-	ret = gpiochip_add_data(gc, data);
+	ret = gpiochip_add_data_with_key(gc, data, lock_key, request_key);
 	if (ret < 0) {
 		devres_free(ptr);
 		return ret;
@@ -523,4 +526,4 @@ int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *gc,
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
+EXPORT_SYMBOL_GPL(devm_gpiochip_add_data_with_key);
include/linux/gpio/driver.h +11 -2
index b8fc92c177eba..e4a00bb42427c 100644
@@ -496,8 +496,16 @@ extern int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 		gpiochip_add_data_with_key(gc, data, &lock_key, \
 					   &request_key);	  \
 	})
+#define devm_gpiochip_add_data(dev, gc, data) ({ \
+		static struct lock_class_key lock_key;	\
+		static struct lock_class_key request_key;	  \
+		devm_gpiochip_add_data_with_key(dev, gc, data, &lock_key, \
+					   &request_key);	  \
+	})
 #else
 #define gpiochip_add_data(gc, data) gpiochip_add_data_with_key(gc, data, NULL, NULL)
+#define devm_gpiochip_add_data(dev, gc, data) \
+	devm_gpiochip_add_data_with_key(dev, gc, data, NULL, NULL)
 #endif /* CONFIG_LOCKDEP */
 
 static inline int gpiochip_add(struct gpio_chip *gc)
@@ -505,8 +513,9 @@ static inline int gpiochip_add(struct gpio_chip *gc)
 	return gpiochip_add_data(gc, NULL);
 }
 extern void gpiochip_remove(struct gpio_chip *gc);
-extern int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *gc,
-				  void *data);
+extern int devm_gpiochip_add_data_with_key(struct device *dev, struct gpio_chip *gc, void *data,
+					   struct lock_class_key *lock_key,
+					   struct lock_class_key *request_key);
 
 extern struct gpio_chip *gpiochip_find(void *data,
 			      int (*match)(struct gpio_chip *gc, void *data));
Signature · 1 line
2.25.1
author maintainer
#307 lore raw

PATCH 306/393 net: thunderx: initialize VFs mailbox mutex before first usage

In reply to Greg Kroah-Hartman

From: Dean Nelson <[email protected]>

[ Upstream commit c1055b76ad00aed0e8b79417080f212d736246b6 ]

A VF's mailbox mutex is not getting initialized by nicvf_probe() until after it is first used. And such usage is resulting in...

[   28.270927] ------------[ cut here ]------------
[   28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[   28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0
[   28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod
[   28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1
[   28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019
[   28.271078] pstate: 60000005 (nZCv daif -PAN -UAO)
[   28.271086] pc : __mutex_lock+0xdac/0x12f0
[   28.271092] lr : __mutex_lock+0xdac/0x12f0
[   28.271097] sp : ffff800d42146fb0
[   28.271103] x29: ffff800d42146fb0 x28: 0000000000000000
[   28.271113] x27: ffff800d24361180 x26: dfff200000000000
[   28.271122] x25: 0000000000000000 x24: 0000000000000002
[   28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848
[   28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c
[   28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184
[   28.271160] x17: 0000000000000000 x16: 0000000000000000
[   28.271170] x15: ffff800d70790c38 x14: ffff20001597c000
[   28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779
[   28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778
[   28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1
[   28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000
[   28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c
[   28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe
[   28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000
[   28.271246] Call trace:
[   28.271254]  __mutex_lock+0xdac/0x12f0
[   28.271261]  mutex_lock_nested+0x3c/0x50
[   28.271297]  nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf]
[   28.271316]  nicvf_register_misc_interrupt+0x20c/0x328 [nicvf]
[   28.271334]  nicvf_probe+0x508/0xda0 [nicvf]
[   28.271344]  local_pci_probe+0xc4/0x180
[   28.271352]  pci_device_probe+0x3ec/0x528
[   28.271363]  driver_probe_device+0x21c/0xb98
[   28.271371]  device_driver_attach+0xe8/0x120
[   28.271379]  __driver_attach+0xe0/0x2a0
[   28.271386]  bus_for_each_dev+0x118/0x190
[   28.271394]  driver_attach+0x48/0x60
[   28.271401]  bus_add_driver+0x328/0x558
[   28.271409]  driver_register+0x148/0x398
[   28.271416]  __pci_register_driver+0x14c/0x1b0
[   28.271437]  nicvf_init_module+0x54/0x10000 [nicvf]
[   28.271447]  do_one_initcall+0x18c/0xc18
[   28.271457]  do_init_module+0x18c/0x618
[   28.271464]  load_module+0x2bc0/0x4088
[   28.271472]  __se_sys_finit_module+0x110/0x188
[   28.271479]  __arm64_sys_finit_module+0x70/0xa0
[   28.271490]  el0_svc_handler+0x15c/0x380
[   28.271496]  el0_svc+0x8/0xc
[   28.271502] irq event stamp: 52649
[   28.271513] hardirqs last  enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8
[   28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0
[   28.271530] softirqs last  enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c
[   28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500
[   28.271545] ---[ end trace a9b90324c8a0d4ee ]---

This problem is resolved by moving the call to mutex_init() up earlier in nicvf_probe().

Fixes 609ea65c65a0 ("net: thunderx: add mutex to protect mailbox from concurrent calls for same VF")
---
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/cavium/thunder/nicvf_main.c +3 -1
index ae48f2e9265fc..79898530760a2 100644
@@ -2179,6 +2179,9 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		nic->max_queues *= 2;
 	nic->ptp_clock = ptp_clock;
 
+	/* Initialize mutex that serializes usage of VF's mailbox */
+	mutex_init(&nic->rx_mode_mtx);
+
 	/* MAP VF's configuration registers */
 	nic->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
 	if (!nic->reg_base) {
@@ -2255,7 +2258,6 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	INIT_WORK(&nic->rx_mode_work.work, nicvf_set_rx_mode_task);
 	spin_lock_init(&nic->rx_mode_wq_lock);
-	mutex_init(&nic->rx_mode_mtx);
 
 	err = register_netdev(netdev);
 	if (err) {
Signature · 1 line
2.25.1
author maintainer
#308 lore raw

PATCH 307/393 media: mtk-mdp: Fix a refcounting bug on error in init

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit dd4eddc4ba31fbf4554fc5fa12d3a553b50e1469 ]

We need to call of_node_put(comp->dev_node); on the error paths in this function.

Fixes c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver")
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/media/platform/mtk-mdp/mtk_mdp_comp.c +12 -4
index 14991685adb78..9b375d3677536 100644
@@ -96,6 +96,7 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 {
 	struct device_node *larb_node;
 	struct platform_device *larb_pdev;
+	int ret;
 	int i;
 
 	if (comp_id < 0 || comp_id >= MTK_MDP_COMP_ID_MAX) {
@@ -113,8 +114,8 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		if (IS_ERR(comp->clk[i])) {
 			if (PTR_ERR(comp->clk[i]) != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get clock\n");
-
-			return PTR_ERR(comp->clk[i]);
+			ret = PTR_ERR(comp->clk[i]);
+			goto put_dev;
 		}
 
 		/* Only RDMA needs two clocks */
@@ -133,20 +134,27 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 	if (!larb_node) {
 		dev_err(dev,
 			"Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto put_dev;
 	}
 
 	larb_pdev = of_find_device_by_node(larb_node);
 	if (!larb_pdev) {
 		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
 		of_node_put(larb_node);
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto put_dev;
 	}
 	of_node_put(larb_node);
 
 	comp->larb_dev = &larb_pdev->dev;
 
 	return 0;
+
+put_dev:
+	of_node_put(comp->dev_node);
+
+	return ret;
 }
 
 void mtk_mdp_comp_deinit(struct device *dev, struct mtk_mdp_comp *comp)
Signature · 1 line
2.25.1
author maintainer
#309 lore raw

PATCH 308/393 dlm: Fix kobject memleak

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 0ffddafc3a3970ef7013696e7f36b3d378bc4c16 ]

Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject.

Set do_unreg = 1 before kobject_init_and_add() to ensure that kobject_put() can be called in its error patch.

Fixes 901195ed7f4b ("Kobject: change GFS2 to use kobject_init_and_add")
---
 fs/dlm/lockspace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/dlm/lockspace.c +3 -3
index afb8340918b86..c689359ca532b 100644
@@ -632,6 +632,9 @@ static int new_lockspace(const char *name, const char *cluster,
 	wait_event(ls->ls_recover_lock_wait,
 		   test_bit(LSFL_RECOVER_LOCK, &ls->ls_flags));
 
+	/* let kobject handle freeing of ls if there's an error */
+	do_unreg = 1;
+
 	ls->ls_kobj.kset = dlm_kset;
 	error = kobject_init_and_add(&ls->ls_kobj, &dlm_ktype, NULL,
 				     "%s", ls->ls_name);
@@ -639,9 +642,6 @@ static int new_lockspace(const char *name, const char *cluster,
 		goto out_recoverd;
 	kobject_uevent(&ls->ls_kobj, KOBJ_ADD);
 
-	/* let kobject handle freeing of ls if there's an error */
-	do_unreg = 1;
-
 	/* This uevent triggers dlm_controld in userspace to add us to the
 	   group of nodes that are members of this lockspace (managed by the
 	   cluster infrastructure.)  Once it's done that, it tells us who the
Signature · 1 line
2.25.1
author maintainer
#310 lore raw

PATCH 309/393 ocfs2: fix unbalanced locking

In reply to Greg Kroah-Hartman

From: Pavel Machek <[email protected]>

[ Upstream commit 57c720d4144a9c2b88105c3e8f7b0e97e4b5cc93 ]

Based on what fails, function can return with nfs_sync_rwlock either locked or unlocked. That can not be right.

Always return with lock unlocked on error.

Fixes 4cd9973f9ff6 ("ocfs2: avoid inode removal while nfsd is accessing it")
Cc Mark Fasheh <[email protected]>
Cc Joel Becker <[email protected]>
Cc Junxiao Bi <[email protected]>
Cc Changwei Ge <[email protected]>
Cc Gang He <[email protected]>
Cc Jun Piao <[email protected]>
---
 fs/ocfs2/dlmglue.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
fs/ocfs2/dlmglue.c +7 -1
index 751bc4dc74663..8e3a369086dbd 100644
@@ -2871,9 +2871,15 @@ int ocfs2_nfs_sync_lock(struct ocfs2_super *osb, int ex)
 
 	status = ocfs2_cluster_lock(osb, lockres, ex ? LKM_EXMODE : LKM_PRMODE,
 				    0, 0);
-	if (status < 0)
+	if (status < 0) {
 		mlog(ML_ERROR, "lock on nfs sync lock failed %d\n", status);
 
+		if (ex)
+			up_write(&osb->nfs_sync_rwlock);
+		else
+			up_read(&osb->nfs_sync_rwlock);
+	}
+
 	return status;
 }
 
Signature · 1 line
2.25.1
author maintainer
#311 lore raw

PATCH 310/393 pinctrl-single: fix pcs_parse_pinconf() return value

In reply to Greg Kroah-Hartman

From: Drew Fustini <[email protected]>

[ Upstream commit f46fe79ff1b65692a65266a5bec6dbe2bf7fc70f ]

This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2.

Analysis:
=========
The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2:

980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,

 981                                                 struct device_node *np,
 982                                                 struct pinctrl_map **map,
 983                                                 unsigned *num_maps,
 984                                                 const char **pgnames)
 985 {
<snip>
1053         (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
1054         (*map)->data.mux.group = np->name;
1055         (*map)->data.mux.function = np->name;

1056
1057 if (PCS_HAS_PINCONF && function) {
1058 res = pcs_parse_pinconf(pcs, np, function, map);
1059 if (res)
1060 goto free_pingroups;
1061 *num_maps = 2;
1062 } else {
1063 *num_maps = 1;
1064 }

However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940:

895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
896 struct pcs_function *func,
897 struct pinctrl_map **map)
898
899 {
900 struct pinctrl_map *m = *map;
<snip>
917 /* If pinconf isn't supported, don't parse properties in below. */
918 if (!PCS_HAS_PINCONF)
919 return 0;
920
921 /* cacluate how much properties are supported in current node */
922 for (i = 0; i < ARRAY_SIZE(prop2); i++) {
923 if (of_find_property(np, prop2[i].name, NULL))
924 nconfs++;
925 }
926 for (i = 0; i < ARRAY_SIZE(prop4); i++) {
927 if (of_find_property(np, prop4[i].name, NULL))
928 nconfs++;
929 }
930 if (!nconfs)
919 return 0;
932
933 func->conf = devm_kcalloc(pcs->dev,
934 nconfs, sizeof(struct pcs_conf_vals),
935 GFP_KERNEL);
936 if (!func->conf)
937 return -ENOMEM;

 938         func->nconfs = nconfs;
 939         conf = &(func->conf[0]);
 940         m++;

This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single".

The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added.

Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties.

[0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/

---
 drivers/pinctrl/pinctrl-single.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/pinctrl/pinctrl-single.c +7 -4
index 1e0614daee9bf..a9d511982780c 100644
@@ -916,7 +916,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
 
 	/* If pinconf isn't supported, don't parse properties in below. */
 	if (!PCS_HAS_PINCONF)
-		return 0;
+		return -ENOTSUPP;
 
 	/* cacluate how much properties are supported in current node */
 	for (i = 0; i < ARRAY_SIZE(prop2); i++) {
@@ -928,7 +928,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
 			nconfs++;
 	}
 	if (!nconfs)
-		return 0;
+		return -ENOTSUPP;
 
 	func->conf = devm_kcalloc(pcs->dev,
 				  nconfs, sizeof(struct pcs_conf_vals),
@@ -1056,9 +1056,12 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
 
 	if (PCS_HAS_PINCONF && function) {
 		res = pcs_parse_pinconf(pcs, np, function, map);
-		if (res)
+		if (res == 0)
+			*num_maps = 2;
+		else if (res == -ENOTSUPP)
+			*num_maps = 1;
+		else
 			goto free_pingroups;
-		*num_maps = 2;
 	} else {
 		*num_maps = 1;
 	}
Signature · 1 line
2.25.1
author maintainer
#312 lore raw

PATCH 311/393 mtd: rawnand: brcmnand: Dont default to edu transfer

In reply to Greg Kroah-Hartman

From: Kamal Dasu <[email protected]>

[ Upstream commit bee3ab8bdd3b13faf08e5b6e0218f59b0a49fcc3 ]

When flash-dma is absent do not default to using flash-edu. Make sure flash-edu is enabled before setting EDU transfer function.

Fixes a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/mtd/nand/raw/brcmnand/brcmnand.c +3 -2
index 968ff77039256..cdae2311a3b69 100644
@@ -2960,8 +2960,9 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 		if (ret < 0)
 			goto err;
 
-		/* set edu transfer function to call */
-		ctrl->dma_trans = brcmnand_edu_trans;
+		if (has_edu(ctrl))
+			/* set edu transfer function to call */
+			ctrl->dma_trans = brcmnand_edu_trans;
 	}
 
 	/* Disable automatic device ID config, direct addressing */
Signature · 1 line
2.25.1
author maintainer
#313 lore raw

PATCH 312/393 svcrdma: Fix page leak in svc_rdma_recv_read_chunk()

In reply to Greg Kroah-Hartman

From: Chuck Lever <[email protected]>

[ Upstream commit e814eecbe3bbeaa8b004d25a4b8974d232b765a9 ]

Commit 07d0ff3b0cd2 ("svcrdma: Clean up Read chunk path") moved the page saver logic so that it gets executed event when an error occurs. In that case, the I/O is never posted, and those pages are then leaked. Errors in this path, however, are quite rare.

Fixes 07d0ff3b0cd2 ("svcrdma: Clean up Read chunk path")
---
 net/sunrpc/xprtrdma/svc_rdma_rw.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)
net/sunrpc/xprtrdma/svc_rdma_rw.c +21 -7
index 23c2d3ce0dc9a..e0a0ae39848c4 100644
@@ -678,7 +678,6 @@ static int svc_rdma_build_read_chunk(struct svc_rqst *rqstp,
 				     struct svc_rdma_read_info *info,
 				     __be32 *p)
 {
-	unsigned int i;
 	int ret;
 
 	ret = -EINVAL;
@@ -701,12 +700,6 @@ static int svc_rdma_build_read_chunk(struct svc_rqst *rqstp,
 		info->ri_chunklen += rs_length;
 	}
 
-	/* Pages under I/O have been copied to head->rc_pages.
-	 * Prevent their premature release by svc_xprt_release() .
-	 */
-	for (i = 0; i < info->ri_readctxt->rc_page_count; i++)
-		rqstp->rq_pages[i] = NULL;
-
 	return ret;
 }
 
@@ -801,6 +794,26 @@ static int svc_rdma_build_pz_read_chunk(struct svc_rqst *rqstp,
 	return ret;
 }
 
+/* Pages under I/O have been copied to head->rc_pages. Ensure they
+ * are not released by svc_xprt_release() until the I/O is complete.
+ *
+ * This has to be done after all Read WRs are constructed to properly
+ * handle a page that is part of I/O on behalf of two different RDMA
+ * segments.
+ *
+ * Do this only if I/O has been posted. Otherwise, we do indeed want
+ * svc_xprt_release() to clean things up properly.
+ */
+static void svc_rdma_save_io_pages(struct svc_rqst *rqstp,
+				   const unsigned int start,
+				   const unsigned int num_pages)
+{
+	unsigned int i;
+
+	for (i = start; i < num_pages + start; i++)
+		rqstp->rq_pages[i] = NULL;
+}
+
 /**
  * svc_rdma_recv_read_chunk - Pull a Read chunk from the client
  * @rdma: controlling RDMA transport
@@ -854,6 +867,7 @@ int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma, struct svc_rqst *rqstp,
 	ret = svc_rdma_post_chunk_ctxt(&info->ri_cc);
 	if (ret < 0)
 		goto out_err;
+	svc_rdma_save_io_pages(rqstp, 0, head->rc_page_count);
 	return 0;
 
 out_err:
Signature · 1 line
2.25.1
author maintainer
#314 lore raw

PATCH 313/393 nfsd: avoid a NULL dereference in __cld_pipe_upcall()

In reply to Greg Kroah-Hartman

From: Scott Mayhew <[email protected]>

[ Upstream commit df60446cd1fb487becd1f36f4c0da9e0e523c0cf ]

If the rpc_pipefs is unmounted, then the rpc_pipe->dentry becomes NULL and dereferencing the dentry->d_sb will trigger an oops. The only reason we're doing that is to determine the nfsd_net, which could instead be passed in by the caller. So do that instead.

Fixes 11a60d159259 ("nfsd: add a "GetVersion" upcall for nfsdcld")
---
 fs/nfsd/nfs4recover.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)
fs/nfsd/nfs4recover.c +11 -13
index a8fb18609146a..82679990dd9b4 100644
@@ -755,13 +755,11 @@ struct cld_upcall {
 };
 
 static int
-__cld_pipe_upcall(struct rpc_pipe *pipe, void *cmsg)
+__cld_pipe_upcall(struct rpc_pipe *pipe, void *cmsg, struct nfsd_net *nn)
 {
 	int ret;
 	struct rpc_pipe_msg msg;
 	struct cld_upcall *cup = container_of(cmsg, struct cld_upcall, cu_u);
-	struct nfsd_net *nn = net_generic(pipe->dentry->d_sb->s_fs_info,
-					  nfsd_net_id);
 
 	memset(&msg, 0, sizeof(msg));
 	msg.data = cmsg;
@@ -781,7 +779,7 @@ __cld_pipe_upcall(struct rpc_pipe *pipe, void *cmsg)
 }
 
 static int
-cld_pipe_upcall(struct rpc_pipe *pipe, void *cmsg)
+cld_pipe_upcall(struct rpc_pipe *pipe, void *cmsg, struct nfsd_net *nn)
 {
 	int ret;
 
@@ -790,7 +788,7 @@ cld_pipe_upcall(struct rpc_pipe *pipe, void *cmsg)
 	 *  upcalls queued.
 	 */
 	do {
-		ret = __cld_pipe_upcall(pipe, cmsg);
+		ret = __cld_pipe_upcall(pipe, cmsg, nn);
 	} while (ret == -EAGAIN);
 
 	return ret;
@@ -1123,7 +1121,7 @@ nfsd4_cld_create(struct nfs4_client *clp)
 	memcpy(cup->cu_u.cu_msg.cm_u.cm_name.cn_id, clp->cl_name.data,
 			clp->cl_name.len);
 
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret) {
 		ret = cup->cu_u.cu_msg.cm_status;
 		set_bit(NFSD4_CLIENT_STABLE, &clp->cl_flags);
@@ -1191,7 +1189,7 @@ nfsd4_cld_create_v2(struct nfs4_client *clp)
 	} else
 		cmsg->cm_u.cm_clntinfo.cc_princhash.cp_len = 0;
 
-	ret = cld_pipe_upcall(cn->cn_pipe, cmsg);
+	ret = cld_pipe_upcall(cn->cn_pipe, cmsg, nn);
 	if (!ret) {
 		ret = cmsg->cm_status;
 		set_bit(NFSD4_CLIENT_STABLE, &clp->cl_flags);
@@ -1229,7 +1227,7 @@ nfsd4_cld_remove(struct nfs4_client *clp)
 	memcpy(cup->cu_u.cu_msg.cm_u.cm_name.cn_id, clp->cl_name.data,
 			clp->cl_name.len);
 
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret) {
 		ret = cup->cu_u.cu_msg.cm_status;
 		clear_bit(NFSD4_CLIENT_STABLE, &clp->cl_flags);
@@ -1272,7 +1270,7 @@ nfsd4_cld_check_v0(struct nfs4_client *clp)
 	memcpy(cup->cu_u.cu_msg.cm_u.cm_name.cn_id, clp->cl_name.data,
 			clp->cl_name.len);
 
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret) {
 		ret = cup->cu_u.cu_msg.cm_status;
 		set_bit(NFSD4_CLIENT_STABLE, &clp->cl_flags);
@@ -1418,7 +1416,7 @@ nfsd4_cld_grace_start(struct nfsd_net *nn)
 	}
 
 	cup->cu_u.cu_msg.cm_cmd = Cld_GraceStart;
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret)
 		ret = cup->cu_u.cu_msg.cm_status;
 
@@ -1446,7 +1444,7 @@ nfsd4_cld_grace_done_v0(struct nfsd_net *nn)
 
 	cup->cu_u.cu_msg.cm_cmd = Cld_GraceDone;
 	cup->cu_u.cu_msg.cm_u.cm_gracetime = nn->boot_time;
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret)
 		ret = cup->cu_u.cu_msg.cm_status;
 
@@ -1474,7 +1472,7 @@ nfsd4_cld_grace_done(struct nfsd_net *nn)
 	}
 
 	cup->cu_u.cu_msg.cm_cmd = Cld_GraceDone;
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret)
 		ret = cup->cu_u.cu_msg.cm_status;
 
@@ -1538,7 +1536,7 @@ nfsd4_cld_get_version(struct nfsd_net *nn)
 		goto out_err;
 	}
 	cup->cu_u.cu_msg.cm_cmd = Cld_GetVersion;
-	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg);
+	ret = cld_pipe_upcall(cn->cn_pipe, &cup->cu_u.cu_msg, nn);
 	if (!ret) {
 		ret = cup->cu_u.cu_msg.cm_status;
 		if (ret)
Signature · 1 line
2.25.1
author maintainer
#315 lore raw

PATCH 314/393 SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()")

In reply to Greg Kroah-Hartman

From: Chuck Lever <[email protected]>

[ Upstream commit 986a4b63d3bc5f2c0eb4083b05aff2bf883b7b2f ]

Braino when converting "buf->len -=" to "buf->len = len -".

The result is under-estimation of the ralign and rslack values. On krb5p mounts, this has caused READDIR to fail with EIO, and KASAN splats when decoding READLINK replies.

As a result of fixing this oversight, the gss_unwrap method now returns a buf->len that can be shorter than priv_len for small RPC messages. The additional adjustment done in unwrap_priv_data() can underflow buf->len. This causes the nfsd_request_too_large check to fail during some NFSv3 operations.

Reported-by Marian Rainer-Harbach
Fixes 31c9590ae468 ("SUNRPC: Add "@len" parameter to gss_unwrap()")
---
 net/sunrpc/auth_gss/gss_krb5_wrap.c | 2 +-
 net/sunrpc/auth_gss/svcauth_gss.c   | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)
net/sunrpc/auth_gss/gss_krb5_wrap.c +1 -1
index cf0fd170ac189..90b8329fef824 100644
@@ -584,7 +584,7 @@ gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, int len,
 							buf->head[0].iov_len);
 	memmove(ptr, ptr + GSS_KRB5_TOK_HDR_LEN + headskip, movelen);
 	buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
-	buf->len = len - GSS_KRB5_TOK_HDR_LEN + headskip;
+	buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip);
 
 	/* Trim off the trailing "extra count" and checksum blob */
 	xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
net/sunrpc/auth_gss/svcauth_gss.c +0 -1
index 46027d0c903f9..c28051f7d217d 100644
@@ -958,7 +958,6 @@ unwrap_priv_data(struct svc_rqst *rqstp, struct xdr_buf *buf, u32 seq, struct gs
 
 	maj_stat = gss_unwrap(ctx, 0, priv_len, buf);
 	pad = priv_len - buf->len;
-	buf->len -= pad;
 	/* The upper layers assume the buffer is aligned on 4-byte boundaries.
 	 * In the krb5p case, at least, the data ends up offset, so we need to
 	 * move it around. */
Signature · 1 line
2.25.1
author maintainer
#316 lore raw

PATCH 315/393 x86/fsgsbase/64: Fix NULL deref in 86_fsgsbase_read_task

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 8ab49526b53d3172d1d8dd03a75c7d1f5bd21239 ]

syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:

   KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
   CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
   RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
   Call Trace:
     putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
     genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
     genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
     copy_regset_from_user include/linux/regset.h:326 [inline]
     ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
     compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
     __do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
     __se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
     __ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
     do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
     __do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
     do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
     entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

This can happen if ptrace() or sigreturn() pokes an LDT selector into FS or GS for a task with no LDT and something tries to read the base before a return to usermode notices the bad selector and fixes it.

The fix is to make sure ldt pointer is not NULL.

Fixes 07e1d88adaae ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Cc Chang S. Bae <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Brian Gerst <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Denys Vlasenko <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Markus T Metzger <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ravi Shankar <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
---
 arch/x86/kernel/process_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/process_64.c +1 -1
index 5ef9d8f25b0e8..cf2cda72a75bf 100644
@@ -315,7 +315,7 @@ static unsigned long x86_fsgsbase_read_task(struct task_struct *task,
 		 */
 		mutex_lock(&task->mm->context.lock);
 		ldt = task->mm->context.ldt;
-		if (unlikely(idx >= ldt->nr_entries))
+		if (unlikely(!ldt || idx >= ldt->nr_entries))
 			base = 0;
 		else
 			base = get_desc_base(ldt->entries + idx);
Signature · 1 line
2.25.1
author maintainer
#317 lore raw

PATCH 316/393 crypto: aesni - add compatibility with IAS

In reply to Greg Kroah-Hartman

From: Jian Cai <[email protected]>

[ Upstream commit 44069737ac9625a0f02f0f7f5ab96aae4cd819bc ]

Clang's integrated assembler complains "invalid reassignment of non-absolute variable 'var_ddq_add'" while assembling arch/x86/crypto/aes_ctrby8_avx-x86_64.S. It was because var_ddq_add was reassigned with non-absolute values several times, which IAS did not support. We can avoid the reassignment by replacing the uses of var_ddq_add with its definitions accordingly to have compatilibility with IAS.

---
 arch/x86/crypto/aes_ctrby8_avx-x86_64.S | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)
arch/x86/crypto/aes_ctrby8_avx-x86_64.S +3 -11
index ec437db1fa547..494a3bda84870 100644
@@ -127,10 +127,6 @@ ddq_add_8:
 
 /* generate a unique variable for ddq_add_x */
 
-.macro setddq n
-	var_ddq_add = ddq_add_\n
-.endm
-
 /* generate a unique variable for xmm register */
 .macro setxdata n
 	var_xdata = %xmm\n
@@ -140,9 +136,7 @@ ddq_add_8:
 
 .macro club name, id
 .altmacro
-	.if \name == DDQ_DATA
-		setddq %\id
-	.elseif \name == XDATA
+	.if \name == XDATA
 		setxdata %\id
 	.endif
 .noaltmacro
@@ -165,9 +159,8 @@ ddq_add_8:
 
 	.set i, 1
 	.rept (by - 1)
-		club DDQ_DATA, i
 		club XDATA, i
-		vpaddq	var_ddq_add(%rip), xcounter, var_xdata
+		vpaddq	(ddq_add_1 + 16 * (i - 1))(%rip), xcounter, var_xdata
 		vptest	ddq_low_msk(%rip), var_xdata
 		jnz 1f
 		vpaddq	ddq_high_add_1(%rip), var_xdata, var_xdata
@@ -180,8 +173,7 @@ ddq_add_8:
 	vmovdqa	1*16(p_keys), xkeyA
 
 	vpxor	xkey0, xdata0, xdata0
-	club DDQ_DATA, by
-	vpaddq	var_ddq_add(%rip), xcounter, xcounter
+	vpaddq	(ddq_add_1 + 16 * (by - 1))(%rip), xcounter, xcounter
 	vptest	ddq_low_msk(%rip), xcounter
 	jnz	1f
 	vpaddq	ddq_high_add_1(%rip), xcounter, xcounter
Signature · 1 line
2.25.1
author maintainer
#318 lore raw

PATCH 317/393 af_packet: TPACKET_V3: fix fill status rwlock imbalance

In reply to Greg Kroah-Hartman

From: John Ogness <[email protected]>

[ Upstream commit 88fd1cb80daa20af063bce81e1fad14e945a8dc4 ]

After @blk_fill_in_prog_lock is acquired there is an early out vnet situation that can occur. In that case, the rwlock needs to be released.

Also, since @blk_fill_in_prog_lock is only acquired when @tp_version is exactly TPACKET_V3, only release it on that exact condition as well.

And finally, add sparse annotation so that it is clearer that prb_fill_curr_block() and prb_clear_blk_fill_status() are acquiring and releasing @blk_fill_in_prog_lock, respectively. sparse is still unable to understand the balance, but the warnings are now on a higher level that make more sense.

Fixes 632ca50f2cbd ("af_packet: TPACKET_V3: replace busy-wait loop")
---
 net/packet/af_packet.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
net/packet/af_packet.c +7 -2
@@ -942,6 +942,7 @@ static int prb_queue_frozen(struct tpack
 }
 
 static void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
+	__releases(&pkc->blk_fill_in_prog_lock)
 {
 	struct tpacket_kbdq_core *pkc  = GET_PBDQC_FROM_RB(rb);
 	atomic_dec(&pkc->blk_fill_in_prog);
@@ -989,6 +990,7 @@ static void prb_fill_curr_block(char *cu
 				struct tpacket_kbdq_core *pkc,
 				struct tpacket_block_desc *pbd,
 				unsigned int len)
+	__acquires(&pkc->blk_fill_in_prog_lock)
 {
 	struct tpacket3_hdr *ppd;
 
@@ -2286,8 +2288,11 @@ static int tpacket_rcv(struct sk_buff *s
 	if (do_vnet &&
 	    virtio_net_hdr_from_skb(skb, h.raw + macoff -
 				    sizeof(struct virtio_net_hdr),
-				    vio_le(), true, 0))
+				    vio_le(), true, 0)) {
+		if (po->tp_version == TPACKET_V3)
+			prb_clear_blk_fill_status(&po->rx_ring);
 		goto drop_n_account;
+	}
 
 	if (po->tp_version <= TPACKET_V2) {
 		packet_increment_rx_head(po, &po->rx_ring);
@@ -2393,7 +2398,7 @@ static int tpacket_rcv(struct sk_buff *s
 		__clear_bit(slot_id, po->rx_ring.rx_owner_map);
 		spin_unlock(&sk->sk_receive_queue.lock);
 		sk->sk_data_ready(sk);
-	} else {
+	} else if (po->tp_version == TPACKET_V3) {
 		prb_clear_blk_fill_status(&po->rx_ring);
 	}
 
author maintainer
#319 lore raw

PATCH 318/393 drivers/net/wan/lapbether: Added needed_headroom and a skb->len check

In reply to Greg Kroah-Hartman

From: Xie He <[email protected]>

[ Upstream commit c7ca03c216acb14466a713fedf1b9f2c24994ef2 ]

1. Added a skb->len check

This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists.

2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated

In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header.

So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create.

However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0.

So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated.

This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets.

Call stack when panic:

[  168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20
put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0
dev:veth0
...
[  168.399255] Call Trace:
[  168.399259]  skb_push.cold+0x14/0x24
[  168.399262]  eth_header+0x2b/0xc0
[  168.399267]  lapbeth_data_transmit+0x9a/0xb0 [lapbether]
[  168.399275]  lapb_data_transmit+0x22/0x2c [lapb]
[  168.399277]  lapb_transmit_buffer+0x71/0xb0 [lapb]
[  168.399279]  lapb_kick+0xe3/0x1c0 [lapb]
[  168.399281]  lapb_data_request+0x76/0xc0 [lapb]
[  168.399283]  lapbeth_xmit+0x56/0x90 [lapbether]
[  168.399286]  dev_hard_start_xmit+0x91/0x1f0
[  168.399289]  ? irq_init_percpu_irqstack+0xc0/0x100
[  168.399291]  __dev_queue_xmit+0x721/0x8e0
[  168.399295]  ? packet_parse_headers.isra.0+0xd2/0x110
[  168.399297]  dev_queue_xmit+0x10/0x20
[  168.399298]  packet_sendmsg+0xbf0/0x19b0

......

---
 drivers/net/wan/lapbether.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wan/lapbether.c +9 -1
@@ -157,6 +157,12 @@ static netdev_tx_t lapbeth_xmit(struct s
 	if (!netif_running(dev))
 		goto drop;
 
+	/* There should be a pseudo header of 1 byte added by upper layers.
+	 * Check to make sure it is there before reading it.
+	 */
+	if (skb->len < 1)
+		goto drop;
+
 	switch (skb->data[0]) {
 	case X25_IFACE_DATA:
 		break;
@@ -305,6 +311,7 @@ static void lapbeth_setup(struct net_dev
 	dev->netdev_ops	     = &lapbeth_netdev_ops;
 	dev->needs_free_netdev = true;
 	dev->type            = ARPHRD_X25;
+	dev->hard_header_len = 0;
 	dev->mtu             = 1000;
 	dev->addr_len        = 0;
 }
@@ -331,7 +338,8 @@ static int lapbeth_new_device(struct net
 	 * then this driver prepends a length field of 2 bytes,
 	 * then the underlying Ethernet device prepends its own header.
 	 */
-	ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len;
+	ndev->needed_headroom = -1 + 3 + 2 + dev->hard_header_len
+					   + dev->needed_headroom;
 
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
author maintainer
#320 lore raw

PATCH 319/393 net: Fix potential memory leak in proto_register()

In reply to Greg Kroah-Hartman

From: Miaohe Lin <[email protected]>

[ Upstream commit 0f5907af39137f8183ed536aaa00f322d7365130 ]

If we failed to assign proto idx, we free the twsk_slab_name but forget to free the twsk_slab. Add a helper function tw_prot_cleanup() to free these together and also use this helper function in proto_unregister().

Fixes b45ce32135d1 ("sock: fix potential memory leak in proto_register()")
---
 net/core/sock.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
net/core/sock.c +15 -10
@@ -3354,6 +3354,16 @@ static void sock_inuse_add(struct net *n
 }
 #endif
 
+static void tw_prot_cleanup(struct timewait_sock_ops *twsk_prot)
+{
+	if (!twsk_prot)
+		return;
+	kfree(twsk_prot->twsk_slab_name);
+	twsk_prot->twsk_slab_name = NULL;
+	kmem_cache_destroy(twsk_prot->twsk_slab);
+	twsk_prot->twsk_slab = NULL;
+}
+
 static void req_prot_cleanup(struct request_sock_ops *rsk_prot)
 {
 	if (!rsk_prot)
@@ -3424,7 +3434,7 @@ int proto_register(struct proto *prot, i
 						  prot->slab_flags,
 						  NULL);
 			if (prot->twsk_prot->twsk_slab == NULL)
-				goto out_free_timewait_sock_slab_name;
+				goto out_free_timewait_sock_slab;
 		}
 	}
 
@@ -3432,15 +3442,15 @@ int proto_register(struct proto *prot, i
 	ret = assign_proto_idx(prot);
 	if (ret) {
 		mutex_unlock(&proto_list_mutex);
-		goto out_free_timewait_sock_slab_name;
+		goto out_free_timewait_sock_slab;
 	}
 	list_add(&prot->node, &proto_list);
 	mutex_unlock(&proto_list_mutex);
 	return ret;
 
-out_free_timewait_sock_slab_name:
+out_free_timewait_sock_slab:
 	if (alloc_slab && prot->twsk_prot)
-		kfree(prot->twsk_prot->twsk_slab_name);
+		tw_prot_cleanup(prot->twsk_prot);
 out_free_request_sock_slab:
 	if (alloc_slab) {
 		req_prot_cleanup(prot->rsk_prot);
@@ -3464,12 +3474,7 @@ void proto_unregister(struct proto *prot
 	prot->slab = NULL;
 
 	req_prot_cleanup(prot->rsk_prot);
-
-	if (prot->twsk_prot != NULL && prot->twsk_prot->twsk_slab != NULL) {
-		kmem_cache_destroy(prot->twsk_prot->twsk_slab);
-		kfree(prot->twsk_prot->twsk_slab_name);
-		prot->twsk_prot->twsk_slab = NULL;
-	}
+	tw_prot_cleanup(prot->twsk_prot);
 }
 EXPORT_SYMBOL(proto_unregister);
 
author maintainer
#321 lore raw

PATCH 320/393 net/nfc/rawsock.c: add CAP_NET_RAW check.

In reply to Greg Kroah-Hartman

From: Qingyu Li <[email protected]>

[ Upstream commit 26896f01467a28651f7a536143fe5ac8449d4041 ]

When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first.

---
 net/nfc/rawsock.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/nfc/rawsock.c +5 -2
@@ -332,10 +332,13 @@ static int rawsock_create(struct net *ne
 	if ((sock->type != SOCK_SEQPACKET) && (sock->type != SOCK_RAW))
 		return -ESOCKTNOSUPPORT;
 
-	if (sock->type == SOCK_RAW)
+	if (sock->type == SOCK_RAW) {
+		if (!capable(CAP_NET_RAW))
+			return -EPERM;
 		sock->ops = &rawsock_raw_ops;
-	else
+	} else {
 		sock->ops = &rawsock_ops;
+	}
 
 	sk = sk_alloc(net, PF_NFC, GFP_ATOMIC, nfc_proto->proto, kern);
 	if (!sk)
author maintainer
#322 lore raw

PATCH 321/393 net: phy: fix memory leak in device-create error path

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

[ Upstream commit d02cbc46136105cf86f84ac355e16f04696f538d ]

A recent commit introduced a late error path in phy_device_create() which fails to release the device name allocated by dev_set_name().

Fixes 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module")
Cc Heiner Kallweit <[email protected]>
---
 drivers/net/phy/phy_device.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/phy/phy_device.c +4 -4
@@ -616,7 +616,9 @@ struct phy_device *phy_device_create(str
 	if (c45_ids)
 		dev->c45_ids = *c45_ids;
 	dev->irq = bus->irq[addr];
+
 	dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
+	device_initialize(&mdiodev->dev);
 
 	dev->state = PHY_DOWN;
 
@@ -650,10 +652,8 @@ struct phy_device *phy_device_create(str
 		ret = phy_request_driver_module(dev, phy_id);
 	}
 
-	if (!ret) {
-		device_initialize(&mdiodev->dev);
-	} else {
-		kfree(dev);
+	if (ret) {
+		put_device(&mdiodev->dev);
 		dev = ERR_PTR(ret);
 	}
 
author maintainer
#323 lore raw

PATCH 322/393 net: Set fput_needed iff FDPUT_FPUT is set

In reply to Greg Kroah-Hartman

From: Miaohe Lin <[email protected]>

[ Upstream commit ce787a5a074a86f76f5d3fd804fa78e01bfb9e89 ]

We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly.

Fixes 00e188ef6a7e ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light")
---
 net/socket.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/socket.c +1 -1
@@ -500,7 +500,7 @@ static struct socket *sockfd_lookup_ligh
 	if (f.file) {
 		sock = sock_from_file(f.file, err);
 		if (likely(sock)) {
-			*fput_needed = f.flags;
+			*fput_needed = f.flags & FDPUT_FPUT;
 			return sock;
 		}
 		fdput(f);
author maintainer
#324 lore raw

PATCH 323/393 net/tls: Fix kmap usage

In reply to Greg Kroah-Hartman

From: Ira Weiny <[email protected]>

[ Upstream commit b06c19d9f827f6743122795570bfc0c72db482b0 ]

When MSG_OOB is specified to tls_device_sendpage() the mapped page is never unmapped.

Hold off mapping the page until after the flags are checked and the page is actually needed.

Fixes e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
---
 net/tls/tls_device.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/tls/tls_device.c +2 -1
@@ -561,7 +561,7 @@ int tls_device_sendpage(struct sock *sk,
 {
 	struct tls_context *tls_ctx = tls_get_ctx(sk);
 	struct iov_iter	msg_iter;
-	char *kaddr = kmap(page);
+	char *kaddr;
 	struct kvec iov;
 	int rc;
 
@@ -576,6 +576,7 @@ int tls_device_sendpage(struct sock *sk,
 		goto out;
 	}
 
+	kaddr = kmap(page);
 	iov.iov_base = kaddr + offset;
 	iov.iov_len = size;
 	iov_iter_kvec(&msg_iter, WRITE, &iov, 1, size);
author maintainer
#325 lore raw

PATCH 324/393 tcp: correct read of TFO keys on big endian systems

In reply to Greg Kroah-Hartman

From: Jason Baron <[email protected]>

[ Upstream commit f19008e676366c44e9241af57f331b6c6edf9552 ]

When TFO keys are read back on big endian systems either via the global sysctl interface or via getsockopt() using TCP_FASTOPEN_KEY, the values don't match what was written.

For example, on s390x:

# echo "1-2-3-4" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
02000000-01000000-04000000-03000000

Instead of:

# cat /proc/sys/net/ipv4/tcp_fastopen_key
00000001-00000002-00000003-00000004

Fix this by converting to the correct endianness on read. This was reported by Colin Ian King when running the 'tcp_fastopen_backup_key' net selftest on s390x, which depends on the read value matching what was written. I've confirmed that the test now passes on big and little endian systems.

Fixes 438ac88009bc ("net: fastopen: robustness and endianness fixes for SipHash")
Cc Ard Biesheuvel <[email protected]>
Cc Eric Dumazet <[email protected]>
---
 include/net/tcp.h          |    2 ++
 net/ipv4/sysctl_net_ipv4.c |   16 ++++------------
 net/ipv4/tcp.c             |   16 ++++------------
 net/ipv4/tcp_fastopen.c    |   23 +++++++++++++++++++++++
 4 files changed, 33 insertions(+), 24 deletions(-)
include/net/tcp.h +2 -0
@@ -1669,6 +1669,8 @@ void tcp_fastopen_destroy_cipher(struct
 void tcp_fastopen_ctx_destroy(struct net *net);
 int tcp_fastopen_reset_cipher(struct net *net, struct sock *sk,
 			      void *primary_key, void *backup_key);
+int tcp_fastopen_get_cipher(struct net *net, struct inet_connection_sock *icsk,
+			    u64 *key);
 void tcp_fastopen_add_skb(struct sock *sk, struct sk_buff *skb);
 struct sock *tcp_try_fastopen(struct sock *sk, struct sk_buff *skb,
 			      struct request_sock *req,
net/ipv4/sysctl_net_ipv4.c +4 -12
@@ -307,24 +307,16 @@ static int proc_tcp_fastopen_key(struct
 	struct ctl_table tbl = { .maxlen = ((TCP_FASTOPEN_KEY_LENGTH *
 					    2 * TCP_FASTOPEN_KEY_MAX) +
 					    (TCP_FASTOPEN_KEY_MAX * 5)) };
-	struct tcp_fastopen_context *ctx;
-	u32 user_key[TCP_FASTOPEN_KEY_MAX * 4];
-	__le32 key[TCP_FASTOPEN_KEY_MAX * 4];
+	u32 user_key[TCP_FASTOPEN_KEY_BUF_LENGTH / sizeof(u32)];
+	__le32 key[TCP_FASTOPEN_KEY_BUF_LENGTH / sizeof(__le32)];
 	char *backup_data;
-	int ret, i = 0, off = 0, n_keys = 0;
+	int ret, i = 0, off = 0, n_keys;
 
 	tbl.data = kmalloc(tbl.maxlen, GFP_KERNEL);
 	if (!tbl.data)
 		return -ENOMEM;
 
-	rcu_read_lock();
-	ctx = rcu_dereference(net->ipv4.tcp_fastopen_ctx);
-	if (ctx) {
-		n_keys = tcp_fastopen_context_len(ctx);
-		memcpy(&key[0], &ctx->key[0], TCP_FASTOPEN_KEY_LENGTH * n_keys);
-	}
-	rcu_read_unlock();
-
+	n_keys = tcp_fastopen_get_cipher(net, NULL, (u64 *)key);
 	if (!n_keys) {
 		memset(&key[0], 0, TCP_FASTOPEN_KEY_LENGTH);
 		n_keys = 1;
net/ipv4/tcp.c +4 -12
@@ -3538,22 +3538,14 @@ static int do_tcp_getsockopt(struct sock
 		return 0;
 
 	case TCP_FASTOPEN_KEY: {
-		__u8 key[TCP_FASTOPEN_KEY_BUF_LENGTH];
-		struct tcp_fastopen_context *ctx;
-		unsigned int key_len = 0;
+		u64 key[TCP_FASTOPEN_KEY_BUF_LENGTH / sizeof(u64)];
+		unsigned int key_len;
 
 		if (get_user(len, optlen))
 			return -EFAULT;
 
-		rcu_read_lock();
-		ctx = rcu_dereference(icsk->icsk_accept_queue.fastopenq.ctx);
-		if (ctx) {
-			key_len = tcp_fastopen_context_len(ctx) *
-					TCP_FASTOPEN_KEY_LENGTH;
-			memcpy(&key[0], &ctx->key[0], key_len);
-		}
-		rcu_read_unlock();
-
+		key_len = tcp_fastopen_get_cipher(net, icsk, key) *
+				TCP_FASTOPEN_KEY_LENGTH;
 		len = min_t(unsigned int, len, key_len);
 		if (put_user(len, optlen))
 			return -EFAULT;
net/ipv4/tcp_fastopen.c +23 -0
@@ -108,6 +108,29 @@ out:
 	return err;
 }
 
+int tcp_fastopen_get_cipher(struct net *net, struct inet_connection_sock *icsk,
+			    u64 *key)
+{
+	struct tcp_fastopen_context *ctx;
+	int n_keys = 0, i;
+
+	rcu_read_lock();
+	if (icsk)
+		ctx = rcu_dereference(icsk->icsk_accept_queue.fastopenq.ctx);
+	else
+		ctx = rcu_dereference(net->ipv4.tcp_fastopen_ctx);
+	if (ctx) {
+		n_keys = tcp_fastopen_context_len(ctx);
+		for (i = 0; i < n_keys; i++) {
+			put_unaligned_le64(ctx->key[i].key[0], key + (i * 2));
+			put_unaligned_le64(ctx->key[i].key[1], key + (i * 2) + 1);
+		}
+	}
+	rcu_read_unlock();
+
+	return n_keys;
+}
+
 static bool __tcp_fastopen_cookie_gen_cipher(struct request_sock *req,
 					     struct sk_buff *syn,
 					     const siphash_key_t *key,
author maintainer
#326 lore raw

PATCH 325/393 vmxnet3: use correct tcp hdr length when packet is encapsulated

In reply to Greg Kroah-Hartman

From: Ronak Doshi <[email protected]>

[ Upstream commit 8a7f280f29a80f6e0798f5d6e07c5dd8726620fe ]

Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, while calculating tcp hdr length, it does not take into account if the packet is encapsulated or not.

This patch fixes this issue by using correct reference for inner tcp header.

Fixes dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
---
 drivers/net/vmxnet3/vmxnet3_drv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/vmxnet3/vmxnet3_drv.c +2 -1
@@ -861,7 +861,8 @@ vmxnet3_parse_hdr(struct sk_buff *skb, s
 
 			switch (protocol) {
 			case IPPROTO_TCP:
-				ctx->l4_hdr_size = tcp_hdrlen(skb);
+				ctx->l4_hdr_size = skb->encapsulation ? inner_tcp_hdrlen(skb) :
+						   tcp_hdrlen(skb);
 				break;
 			case IPPROTO_UDP:
 				ctx->l4_hdr_size = sizeof(struct udphdr);
author maintainer
#327 lore raw

PATCH 326/393 net: refactor bind_bucket fastreuse into helper

In reply to Greg Kroah-Hartman

From: Tim Froidcoeur <[email protected]>

[ Upstream commit 62ffc589abb176821662efc4525ee4ac0b9c3894 ]

Refactor the fastreuse update code in inet_csk_get_port into a small helper function that can be called from other places.

---
 include/net/inet_connection_sock.h |    4 +
 net/ipv4/inet_connection_sock.c    |   97 ++++++++++++++++++++-----------------
 2 files changed, 57 insertions(+), 44 deletions(-)
include/net/inet_connection_sock.h +4 -0
@@ -309,6 +309,10 @@ int inet_csk_compat_getsockopt(struct so
 int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
 			       char __user *optval, unsigned int optlen);
 
+/* update the fast reuse flag when adding a socket */
+void inet_csk_update_fastreuse(struct inet_bind_bucket *tb,
+			       struct sock *sk);
+
 struct dst_entry *inet_csk_update_pmtu(struct sock *sk, u32 mtu);
 
 #define TCP_PINGPONG_THRESH	3
net/ipv4/inet_connection_sock.c +53 -44

115 lines not on this page · raw message