package/ibm-sw-tpm2: fix glibc build errors
PATCH 1/1 package/ibm-sw-tpm2: fix glibc build errors
From: Vincent Fazio <[email protected]>
In order to not have to define all architecture bitness variants in src/LibSupport.h to conditionally define RADIX_BITS, a patch was created to depend on LONG_BIT being defined via limits.h
For glibc, LONG_BIT is behind a _XOPEN_SOURCE define guard so patch the makefile to define this macro as well as _DEFAULT_SOURCE.
Defining _XOPEN_SOURCE requires _DEFAULT_SOURCE to be explicitly defined for builds to succeed as it is no longer impliclty defined when _XOPEN_SOURCE is defined.
Fixes:
http://autobuild.buildroot.net/results/bc145dd23c80a0660300766d0c114a00ed2e52b6/ http://autobuild.buildroot.net/results/1d84e70c30d4d0719274aa4f3edc01772beb24a3/
--- package/ibm-sw-tpm2/0002-Add-required-defines.patch | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 package/ibm-sw-tpm2/0002-Add-required-defines.patch
package/ibm-sw-tpm2/0002-Add-required-defines.patch new file +11 -0
@@ -0,0 +1,11 @@ +--- a/src/makefile ++++ b/src/makefile +@@ -46,6 +46,8 @@ CCFLAGS = -Wall \ + -c -ggdb -O0 \ + -DTPM_POSIX \ + -D_POSIX_ \ ++ -D_DEFAULT_SOURCE \ ++ -D_XOPEN_SOURCE \ + -DTPM_NUVOTON + + # add this line for big endian platforms
Signature · 1 line
2.28.0
PATCH 1/1 package/ibm-sw-tpm2: fix glibc build errors
Hello Vincent,
Thanks for having looked into this issue!
package/ibm-sw-tpm2/0002-Add-required-defines.patch
Quoted 5 lines · On Mon, 17 Aug 2020 14:27:12 -0500 Vincent Fazio <[email protected]> wrote:
package/ibm-sw-tpm2/0002-Add-required-defines.patch new file +0
-0
All patches must have a proper Git commit message, with a description and Signed-off-by line.
However, in this case, I think this shouldn't be a separate 0002 patch:
the patch 0001 that makes use of LONG_BIT should be adjusted.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com