Skip to contentSkip to conversation

net: eth: altera: tse: Add PTP and mSGDMA prefetcher

PATCH In review Ooi, Joyce 2 participants 13 messages Aug 18, 2020

Subsystems (4)
lore
Share & tools
lore

Ooi, Joyce

author
#0 lore raw

v6 cover net: eth: altera: tse: Add PTP and mSGDMA prefetcher

From: Joyce Ooi <[email protected]>

This patch series cleans up the Altera TSE driver and adds support for the newer msgdma prefetcher as well as ptp support when using the msgdma prefetcher.

v2: Rename altera_ptp to intel_fpga_tod, modify msgdma and sgdma tx_buffer
functions to be of type netdev_tx_t, and minor suggested edits
v3: Modify tx_buffer to stop queue before returning NETDEV_TX_BUSY
v4: Fix build warnings
v5: Rename 'ptp_enable' variable to 'has_ptp' and initialize hardware clock
to 0 in intel_fpga_tod, and make minor suggested changes
v6: Fix build warning and remove return error to allow PHY with
timestamping support to pass through ioctl

Dalon Westergreen (10):
net: eth: altera: tse_start_xmit ignores tx_buffer call response
net: eth: altera: set rx and tx ring size before init_dma call
net: eth: altera: fix altera_dmaops declaration
net: eth: altera: add optional function to start tx dma
net: eth: altera: Move common functions to altera_utils
net: eth: altera: Add missing identifier names to function
declarations
net: eth: altera: change tx functions to type netdev_tx_t
net: eth: altera: add support for ptp and timestamping
net: eth: altera: add msgdma prefetcher
net: eth: altera: update devicetree bindings documentation

 .../devicetree/bindings/net/altera_tse.txt         | 103 ++++-
 drivers/net/ethernet/altera/Kconfig                |   1 +
 drivers/net/ethernet/altera/Makefile               |   3 +-
 drivers/net/ethernet/altera/altera_msgdma.c        |   5 +-
 drivers/net/ethernet/altera/altera_msgdma.h        |  30 +-
 .../net/ethernet/altera/altera_msgdma_prefetcher.c | 431 +++++++++++++++++++++
 .../net/ethernet/altera/altera_msgdma_prefetcher.h |  30 ++
 .../ethernet/altera/altera_msgdmahw_prefetcher.h   |  87 +++++
 drivers/net/ethernet/altera/altera_sgdma.c         |  22 +-
 drivers/net/ethernet/altera/altera_sgdma.h         |  32 +-
 drivers/net/ethernet/altera/altera_tse.h           |  98 ++---
 drivers/net/ethernet/altera/altera_tse_ethtool.c   |  30 ++
 drivers/net/ethernet/altera/altera_tse_main.c      | 200 ++++++++--
 drivers/net/ethernet/altera/altera_utils.c         |  29 ++
 drivers/net/ethernet/altera/altera_utils.h         |  51 +++
 drivers/net/ethernet/altera/intel_fpga_tod.c       | 341 ++++++++++++++++
 drivers/net/ethernet/altera/intel_fpga_tod.h       |  56 +++
 17 files changed, 1396 insertions(+), 153 deletions(-)
 create mode 100644 drivers/net/ethernet/altera/altera_msgdma_prefetcher.c
 create mode 100644 drivers/net/ethernet/altera/altera_msgdma_prefetcher.h
 create mode 100644 drivers/net/ethernet/altera/altera_msgdmahw_prefetcher.h
 create mode 100644 drivers/net/ethernet/altera/intel_fpga_tod.c
 create mode 100644 drivers/net/ethernet/altera/intel_fpga_tod.h
Signature · 1 line
2.13.0
author
#1 lore raw

PATCH v6 1/10 net: eth: altera: tse_start_xmit ignores tx_buffer call response

From: Dalon Westergreen <[email protected]>

The return from tx_buffer call in tse_start_xmit is inapropriately ignored. tse_buffer calls should return 0 for success or NETDEV_TX_BUSY. tse_start_xmit should return not report a successful transmit when the tse_buffer call returns an error condition.

In addition to the above, the msgdma and sgdma do not return the same value on success or failure. The sgdma_tx_buffer returned 0 on failure and a positive number of transmitted packets on success. Given that it only ever sends 1 packet, this made no sense. The msgdma implementation msgdma_tx_buffer returns 0 on success.

-> Don't ignore the return from tse_buffer calls -> Fix sgdma tse_buffer call to return 0 on success
and NETDEV_TX_BUSY on failure.

---
v2: no change
v3: queue is stopped before returning NETDEV_TX_BUSY
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_sgdma.c    | 19 ++++++++++++-------
 drivers/net/ethernet/altera/altera_tse_main.c |  4 +++-
 2 files changed, 15 insertions(+), 8 deletions(-)
drivers/net/ethernet/altera/altera_sgdma.c +12 -7
index db97170da8c7..fe6276c7e4a3 100644
@@ -4,6 +4,7 @@
  */
 
 #include <linux/list.h>
+#include <linux/netdevice.h>
 #include "altera_utils.h"
 #include "altera_tse.h"
 #include "altera_sgdmahw.h"
@@ -159,10 +160,11 @@ void sgdma_clear_txirq(struct altera_tse_private *priv)
 		    SGDMA_CTRLREG_CLRINT);
 }
 
-/* transmits buffer through SGDMA. Returns number of buffers
- * transmitted, 0 if not possible.
- *
- * tx_lock is held by the caller
+/* transmits buffer through SGDMA.
+ *   original behavior returned the number of transmitted packets (always 1) &
+ *   returned 0 on error.  This differs from the msgdma.  the calling function
+ *   will now actually look at the code, so from now, 0 is good and return
+ *   NETDEV_TX_BUSY when busy.
  */
 int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 {
@@ -173,8 +175,11 @@ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 	struct sgdma_descrip __iomem *ndesc = &descbase[1];
 
 	/* wait 'til the tx sgdma is ready for the next transmit request */
-	if (sgdma_txbusy(priv))
-		return 0;
+	if (sgdma_txbusy(priv)) {
+		if (!netif_queue_stopped(priv->dev))
+			netif_stop_queue(priv->dev);
+		return NETDEV_TX_BUSY;
+	}
 
 	sgdma_setup_descrip(cdesc,			/* current descriptor */
 			    ndesc,			/* next descriptor */
@@ -191,7 +196,7 @@ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 	/* enqueue the request to the pending transmit queue */
 	queue_tx(priv, buffer);
 
-	return 1;
+	return 0;
 }
 
 
drivers/net/ethernet/altera/altera_tse_main.c +3 -1
index 907125abef2c..ec2b36e05c3f 100644
@@ -595,7 +595,9 @@ static netdev_tx_t tse_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	buffer->dma_addr = dma_addr;
 	buffer->len = nopaged_len;
 
-	priv->dmaops->tx_buffer(priv, buffer);
+	ret = priv->dmaops->tx_buffer(priv, buffer);
+	if (ret)
+		goto out;
 
 	skb_tx_timestamp(skb);
 
Signature · 1 line
2.13.0
author
#2 lore raw

PATCH v6 2/10 net: eth: altera: set rx and tx ring size before init_dma call

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

It is more appropriate to set the rx and tx ring size before calling the init function for the dma.

---
v2: no change
v3: no change
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_tse_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/altera/altera_tse_main.c +4 -2
index ec2b36e05c3f..a3749ffdcac9 100644
@@ -1154,6 +1154,10 @@ static int tse_open(struct net_device *dev)
 	int i;
 	unsigned long int flags;
 
+	/* set tx and rx ring size */
+	priv->rx_ring_size = dma_rx_num;
+	priv->tx_ring_size = dma_tx_num;
+
 	/* Reset and configure TSE MAC and probe associated PHY */
 	ret = priv->dmaops->init_dma(priv);
 	if (ret != 0) {
@@ -1196,8 +1200,6 @@ static int tse_open(struct net_device *dev)
 	priv->dmaops->reset_dma(priv);
 
 	/* Create and initialize the TX/RX descriptors chains. */
-	priv->rx_ring_size = dma_rx_num;
-	priv->tx_ring_size = dma_tx_num;
 	ret = alloc_init_skbufs(priv);
 	if (ret) {
 		netdev_err(dev, "DMA descriptors initialization failed\n");
Signature · 1 line
2.13.0
author
#3 lore raw

PATCH v6 3/10 net: eth: altera: fix altera_dmaops declaration

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

The declaration of struct altera_dmaops does not have identifier names. Add identifier names to confrom with required coding styles.

---
v2: no change
v3: no change
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_tse.h | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
drivers/net/ethernet/altera/altera_tse.h +16 -14
index f17acfb579a0..7d0c98fc103e 100644
@@ -385,20 +385,22 @@ struct altera_tse_private;
 struct altera_dmaops {
 	int altera_dtype;
 	int dmamask;
-	void (*reset_dma)(struct altera_tse_private *);
-	void (*enable_txirq)(struct altera_tse_private *);
-	void (*enable_rxirq)(struct altera_tse_private *);
-	void (*disable_txirq)(struct altera_tse_private *);
-	void (*disable_rxirq)(struct altera_tse_private *);
-	void (*clear_txirq)(struct altera_tse_private *);
-	void (*clear_rxirq)(struct altera_tse_private *);
-	int (*tx_buffer)(struct altera_tse_private *, struct tse_buffer *);
-	u32 (*tx_completions)(struct altera_tse_private *);
-	void (*add_rx_desc)(struct altera_tse_private *, struct tse_buffer *);
-	u32 (*get_rx_status)(struct altera_tse_private *);
-	int (*init_dma)(struct altera_tse_private *);
-	void (*uninit_dma)(struct altera_tse_private *);
-	void (*start_rxdma)(struct altera_tse_private *);
+	void (*reset_dma)(struct altera_tse_private *priv);
+	void (*enable_txirq)(struct altera_tse_private *priv);
+	void (*enable_rxirq)(struct altera_tse_private *priv);
+	void (*disable_txirq)(struct altera_tse_private *priv);
+	void (*disable_rxirq)(struct altera_tse_private *priv);
+	void (*clear_txirq)(struct altera_tse_private *priv);
+	void (*clear_rxirq)(struct altera_tse_private *priv);
+	int (*tx_buffer)(struct altera_tse_private *priv,
+			 struct tse_buffer *buffer);
+	u32 (*tx_completions)(struct altera_tse_private *priv);
+	void (*add_rx_desc)(struct altera_tse_private *priv,
+			    struct tse_buffer *buffer);
+	u32 (*get_rx_status)(struct altera_tse_private *priv);
+	int (*init_dma)(struct altera_tse_private *priv);
+	void (*uninit_dma)(struct altera_tse_private *priv);
+	void (*start_rxdma)(struct altera_tse_private *priv);
 };
 
 /* This structure is private to each device.
Signature · 1 line
2.13.0
author
#4 lore raw

PATCH v6 4/10 net: eth: altera: add optional function to start tx dma

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

Allow for optional start up of tx dma if the start_txdma function is defined in altera_dmaops.

---
v2: no change
v3: no change
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_tse.h      | 1 +
 drivers/net/ethernet/altera/altera_tse_main.c | 5 +++++
 2 files changed, 6 insertions(+)
drivers/net/ethernet/altera/altera_tse.h +1 -0
index 7d0c98fc103e..26c5541fda27 100644
@@ -401,6 +401,7 @@ struct altera_dmaops {
 	int (*init_dma)(struct altera_tse_private *priv);
 	void (*uninit_dma)(struct altera_tse_private *priv);
 	void (*start_rxdma)(struct altera_tse_private *priv);
+	void (*start_txdma)(struct altera_tse_private *priv);
 };
 
 /* This structure is private to each device.
drivers/net/ethernet/altera/altera_tse_main.c +5 -0
index a3749ffdcac9..0a724e4d2c8c 100644
@@ -1244,6 +1244,9 @@ static int tse_open(struct net_device *dev)
 
 	priv->dmaops->start_rxdma(priv);
 
+	if (priv->dmaops->start_txdma)
+		priv->dmaops->start_txdma(priv);
+
 	/* Start MAC Rx/Tx */
 	spin_lock(&priv->mac_cfg_lock);
 	tse_set_mac(priv, true);
@@ -1646,6 +1649,7 @@ static const struct altera_dmaops altera_dtype_sgdma = {
 	.init_dma = sgdma_initialize,
 	.uninit_dma = sgdma_uninitialize,
 	.start_rxdma = sgdma_start_rxdma,
+	.start_txdma = NULL,
 };
 
 static const struct altera_dmaops altera_dtype_msgdma = {
@@ -1665,6 +1669,7 @@ static const struct altera_dmaops altera_dtype_msgdma = {
 	.init_dma = msgdma_initialize,
 	.uninit_dma = msgdma_uninitialize,
 	.start_rxdma = msgdma_start_rxdma,
+	.start_txdma = NULL,
 };
 
 static const struct of_device_id altera_tse_ids[] = {
Signature · 1 line
2.13.0
author
#5 lore raw

PATCH v6 5/10 net: eth: altera: Move common functions to altera_utils

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

Move request_and_map and other shared functions to altera_utils. This is the first step to moving common code out of tse specific code so that it can be shared with future altera ethernet ip.

---
v2: no change
v3: no change
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_tse.h         | 45 ---------------------
 drivers/net/ethernet/altera/altera_tse_ethtool.c |  1 +
 drivers/net/ethernet/altera/altera_tse_main.c    | 32 +--------------
 drivers/net/ethernet/altera/altera_utils.c       | 29 ++++++++++++++
 drivers/net/ethernet/altera/altera_utils.h       | 51 ++++++++++++++++++++++++
 5 files changed, 82 insertions(+), 76 deletions(-)
drivers/net/ethernet/altera/altera_tse.h +0 -45
index 26c5541fda27..fa24ab3c7d6a 100644
@@ -489,49 +489,4 @@ struct altera_tse_private {
  */
 void altera_tse_set_ethtool_ops(struct net_device *);
 
-static inline
-u32 csrrd32(void __iomem *mac, size_t offs)
-{
-	void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-	return readl(paddr);
-}
-
-static inline
-u16 csrrd16(void __iomem *mac, size_t offs)
-{
-	void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-	return readw(paddr);
-}
-
-static inline
-u8 csrrd8(void __iomem *mac, size_t offs)
-{
-	void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-	return readb(paddr);
-}
-
-static inline
-void csrwr32(u32 val, void __iomem *mac, size_t offs)
-{
-	void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-
-	writel(val, paddr);
-}
-
-static inline
-void csrwr16(u16 val, void __iomem *mac, size_t offs)
-{
-	void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-
-	writew(val, paddr);
-}
-
-static inline
-void csrwr8(u8 val, void __iomem *mac, size_t offs)
-{
-	void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-
-	writeb(val, paddr);
-}
-
 #endif /* __ALTERA_TSE_H__ */
drivers/net/ethernet/altera/altera_tse_ethtool.c +1 -0
index 4299f1301149..420d77f00eab 100644
@@ -22,6 +22,7 @@
 #include <linux/phy.h>
 
 #include "altera_tse.h"
+#include "altera_utils.h"
 
 #define TSE_STATS_LEN	31
 #define TSE_NUM_REGS	128
drivers/net/ethernet/altera/altera_tse_main.c +1 -31
index 0a724e4d2c8c..c9100ce24b0a 100644
@@ -23,7 +23,6 @@
 #include <linux/if_vlan.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mii.h>
@@ -33,7 +32,7 @@
 #include <linux/of_net.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/platform_device.h>
+#include <linux/ptp_classify.h>
 #include <linux/skbuff.h>
 #include <asm/cacheflush.h>
 
@@ -1320,35 +1319,6 @@ static struct net_device_ops altera_tse_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-static int request_and_map(struct platform_device *pdev, const char *name,
-			   struct resource **res, void __iomem **ptr)
-{
-	struct resource *region;
-	struct device *device = &pdev->dev;
-
-	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
-	if (*res == NULL) {
-		dev_err(device, "resource %s not defined\n", name);
-		return -ENODEV;
-	}
-
-	region = devm_request_mem_region(device, (*res)->start,
-					 resource_size(*res), dev_name(device));
-	if (region == NULL) {
-		dev_err(device, "unable to request %s\n", name);
-		return -EBUSY;
-	}
-
-	*ptr = devm_ioremap(device, region->start,
-				    resource_size(region));
-	if (*ptr == NULL) {
-		dev_err(device, "ioremap of %s failed!", name);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
 /* Probe Altera TSE MAC device
  */
 static int altera_tse_probe(struct platform_device *pdev)
drivers/net/ethernet/altera/altera_utils.c +29 -0
index e6a7fc9d8fb1..c9bc7d0ea02a 100644
@@ -31,3 +31,32 @@ int tse_bit_is_clear(void __iomem *ioaddr, size_t offs, u32 bit_mask)
 	u32 value = csrrd32(ioaddr, offs);
 	return (value & bit_mask) ? 0 : 1;
 }
+
+int request_and_map(struct platform_device *pdev, const char *name,
+		    struct resource **res, void __iomem **ptr)
+{
+	struct resource *region;
+	struct device *device = &pdev->dev;
+
+	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!*res) {
+		dev_err(device, "resource %s not defined\n", name);
+		return -ENODEV;
+	}
+
+	region = devm_request_mem_region(device, (*res)->start,
+					 resource_size(*res), dev_name(device));
+	if (!region) {
+		dev_err(device, "unable to request %s\n", name);
+		return -EBUSY;
+	}
+
+	*ptr = devm_ioremap(device, region->start,
+			    resource_size(region));
+	if (!*ptr) {
+		dev_err(device, "ioremap of %s failed!", name);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
drivers/net/ethernet/altera/altera_utils.h +51 -0

63 lines not on this page · raw message

Signature · 1 line
2.13.0
author
#6 lore raw

PATCH v6 6/10 net: eth: altera: Add missing identifier names to function declarations

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

The sgdma and msgdma header files included function declarations without identifier names for pointers. Add appropriate identifier names.

---
v2: this patch is added in patch version 2
v3: no change
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_msgdma.h | 30 ++++++++++++++-------------
 drivers/net/ethernet/altera/altera_sgdma.h  | 32 +++++++++++++++--------------
 2 files changed, 33 insertions(+), 29 deletions(-)
drivers/net/ethernet/altera/altera_msgdma.h +16 -14
index 9813fbfff4d3..23f5b2a13898 100644
@@ -6,19 +6,21 @@
 #ifndef __ALTERA_MSGDMA_H__
 #define __ALTERA_MSGDMA_H__
 
-void msgdma_reset(struct altera_tse_private *);
-void msgdma_enable_txirq(struct altera_tse_private *);
-void msgdma_enable_rxirq(struct altera_tse_private *);
-void msgdma_disable_rxirq(struct altera_tse_private *);
-void msgdma_disable_txirq(struct altera_tse_private *);
-void msgdma_clear_rxirq(struct altera_tse_private *);
-void msgdma_clear_txirq(struct altera_tse_private *);
-u32 msgdma_tx_completions(struct altera_tse_private *);
-void msgdma_add_rx_desc(struct altera_tse_private *, struct tse_buffer *);
-int msgdma_tx_buffer(struct altera_tse_private *, struct tse_buffer *);
-u32 msgdma_rx_status(struct altera_tse_private *);
-int msgdma_initialize(struct altera_tse_private *);
-void msgdma_uninitialize(struct altera_tse_private *);
-void msgdma_start_rxdma(struct altera_tse_private *);
+void msgdma_reset(struct altera_tse_private *priv);
+void msgdma_enable_txirq(struct altera_tse_private *priv);
+void msgdma_enable_rxirq(struct altera_tse_private *priv);
+void msgdma_disable_rxirq(struct altera_tse_private *priv);
+void msgdma_disable_txirq(struct altera_tse_private *priv);
+void msgdma_clear_rxirq(struct altera_tse_private *priv);
+void msgdma_clear_txirq(struct altera_tse_private *priv);
+u32 msgdma_tx_completions(struct altera_tse_private *priv);
+void msgdma_add_rx_desc(struct altera_tse_private *priv,
+			struct tse_buffer *buffer);
+int msgdma_tx_buffer(struct altera_tse_private *priv,
+		     struct tse_buffer *buffer);
+u32 msgdma_rx_status(struct altera_tse_private *priv);
+int msgdma_initialize(struct altera_tse_private *priv);
+void msgdma_uninitialize(struct altera_tse_private *priv);
+void msgdma_start_rxdma(struct altera_tse_private *priv);
 
 #endif /*  __ALTERA_MSGDMA_H__ */
drivers/net/ethernet/altera/altera_sgdma.h +17 -15
index 08afe1c9994f..3fb201417820 100644
@@ -6,20 +6,22 @@
 #ifndef __ALTERA_SGDMA_H__
 #define __ALTERA_SGDMA_H__
 
-void sgdma_reset(struct altera_tse_private *);
-void sgdma_enable_txirq(struct altera_tse_private *);
-void sgdma_enable_rxirq(struct altera_tse_private *);
-void sgdma_disable_rxirq(struct altera_tse_private *);
-void sgdma_disable_txirq(struct altera_tse_private *);
-void sgdma_clear_rxirq(struct altera_tse_private *);
-void sgdma_clear_txirq(struct altera_tse_private *);
-int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *);
-u32 sgdma_tx_completions(struct altera_tse_private *);
-void sgdma_add_rx_desc(struct altera_tse_private *priv, struct tse_buffer *);
-void sgdma_status(struct altera_tse_private *);
-u32 sgdma_rx_status(struct altera_tse_private *);
-int sgdma_initialize(struct altera_tse_private *);
-void sgdma_uninitialize(struct altera_tse_private *);
-void sgdma_start_rxdma(struct altera_tse_private *);
+void sgdma_reset(struct altera_tse_private *priv);
+void sgdma_enable_txirq(struct altera_tse_private *priv);
+void sgdma_enable_rxirq(struct altera_tse_private *priv);
+void sgdma_disable_rxirq(struct altera_tse_private *priv);
+void sgdma_disable_txirq(struct altera_tse_private *priv);
+void sgdma_clear_rxirq(struct altera_tse_private *priv);
+void sgdma_clear_txirq(struct altera_tse_private *priv);
+int sgdma_tx_buffer(struct altera_tse_private *priv,
+		    struct tse_buffer *buffer);
+u32 sgdma_tx_completions(struct altera_tse_private *priv);
+void sgdma_add_rx_desc(struct altera_tse_private *priv,
+		       struct tse_buffer *buffer);
+void sgdma_status(struct altera_tse_private *priv);
+u32 sgdma_rx_status(struct altera_tse_private *priv);
+int sgdma_initialize(struct altera_tse_private *priv);
+void sgdma_uninitialize(struct altera_tse_private *priv);
+void sgdma_start_rxdma(struct altera_tse_private *priv);
 
 #endif /*  __ALTERA_SGDMA_H__ */
Signature · 1 line
2.13.0
author
#7 lore raw

PATCH v6 7/10 net: eth: altera: change tx functions to type netdev_tx_t

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

Modify all msgdma and sgdma tx_buffer functions to be of type netdev_tx_t, and also modify main tx function to be of netdev_tx_t type.

---
v2: this patch is added in patch version 2
v3: no change
v4: no change
v5: no change
v6: no change

---
 drivers/net/ethernet/altera/altera_msgdma.c | 5 +++--
 drivers/net/ethernet/altera/altera_msgdma.h | 4 ++--
 drivers/net/ethernet/altera/altera_sgdma.c  | 5 +++--
 drivers/net/ethernet/altera/altera_sgdma.h  | 4 ++--
 drivers/net/ethernet/altera/altera_tse.h    | 4 ++--
 5 files changed, 12 insertions(+), 10 deletions(-)
drivers/net/ethernet/altera/altera_msgdma.c +3 -2
index ac1efd08267a..ac68151a7f47 100644
@@ -106,7 +106,8 @@ void msgdma_clear_txirq(struct altera_tse_private *priv)
 }
 
 /* return 0 to indicate transmit is pending */
-int msgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
+netdev_tx_t
+msgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 {
 	csrwr32(lower_32_bits(buffer->dma_addr), priv->tx_dma_desc,
 		msgdma_descroffs(read_addr_lo));
@@ -120,7 +121,7 @@ int msgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 		msgdma_descroffs(stride));
 	csrwr32(MSGDMA_DESC_CTL_TX_SINGLE, priv->tx_dma_desc,
 		msgdma_descroffs(control));
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 u32 msgdma_tx_completions(struct altera_tse_private *priv)
drivers/net/ethernet/altera/altera_msgdma.h +2 -2
index 23f5b2a13898..d816b24dfa7f 100644
@@ -16,8 +16,8 @@ void msgdma_clear_txirq(struct altera_tse_private *priv);
 u32 msgdma_tx_completions(struct altera_tse_private *priv);
 void msgdma_add_rx_desc(struct altera_tse_private *priv,
 			struct tse_buffer *buffer);
-int msgdma_tx_buffer(struct altera_tse_private *priv,
-		     struct tse_buffer *buffer);
+netdev_tx_t msgdma_tx_buffer(struct altera_tse_private *priv,
+			     struct tse_buffer *buffer);
 u32 msgdma_rx_status(struct altera_tse_private *priv);
 int msgdma_initialize(struct altera_tse_private *priv);
 void msgdma_uninitialize(struct altera_tse_private *priv);
drivers/net/ethernet/altera/altera_sgdma.c +3 -2
index fe6276c7e4a3..6898ec682425 100644
@@ -166,7 +166,8 @@ void sgdma_clear_txirq(struct altera_tse_private *priv)
  *   will now actually look at the code, so from now, 0 is good and return
  *   NETDEV_TX_BUSY when busy.
  */
-int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
+netdev_tx_t
+sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 {
 	struct sgdma_descrip __iomem *descbase =
 		(struct sgdma_descrip __iomem *)priv->tx_dma_desc;
@@ -196,7 +197,7 @@ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer)
 	/* enqueue the request to the pending transmit queue */
 	queue_tx(priv, buffer);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 
drivers/net/ethernet/altera/altera_sgdma.h +2 -2
index 3fb201417820..6a41833f0965 100644
@@ -13,8 +13,8 @@ void sgdma_disable_rxirq(struct altera_tse_private *priv);
 void sgdma_disable_txirq(struct altera_tse_private *priv);
 void sgdma_clear_rxirq(struct altera_tse_private *priv);
 void sgdma_clear_txirq(struct altera_tse_private *priv);
-int sgdma_tx_buffer(struct altera_tse_private *priv,
-		    struct tse_buffer *buffer);
+netdev_tx_t sgdma_tx_buffer(struct altera_tse_private *priv,
+			    struct tse_buffer *buffer);
 u32 sgdma_tx_completions(struct altera_tse_private *priv);
 void sgdma_add_rx_desc(struct altera_tse_private *priv,
 		       struct tse_buffer *buffer);
drivers/net/ethernet/altera/altera_tse.h +2 -2
index fa24ab3c7d6a..79d02748c89d 100644
@@ -392,8 +392,8 @@ struct altera_dmaops {
 	void (*disable_rxirq)(struct altera_tse_private *priv);
 	void (*clear_txirq)(struct altera_tse_private *priv);
 	void (*clear_rxirq)(struct altera_tse_private *priv);
-	int (*tx_buffer)(struct altera_tse_private *priv,
-			 struct tse_buffer *buffer);
+	netdev_tx_t (*tx_buffer)(struct altera_tse_private *priv,
+				 struct tse_buffer *buffer);
 	u32 (*tx_completions)(struct altera_tse_private *priv);
 	void (*add_rx_desc)(struct altera_tse_private *priv,
 			    struct tse_buffer *buffer);
Signature · 1 line
2.13.0
author
#8 lore raw

PATCH v6 8/10 net: eth: altera: add support for ptp and timestamping

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

Add support for the ptp clock used with the tse, and update the driver to support timestamping when enabled. We also enable debugfs entries for the ptp clock to allow some user control and interaction with the ptp clock.

---
v2: this patch is added in patch version 2
v3: no change
v4: no change
v5: rename 'ptp_enable' variable to 'has_ptp', initialize hardware clock
to 0, and minor suggested edits
v6: fix build warning and remove return error to allow PHY with timestamping
support to pass through ioctl

---
 drivers/net/ethernet/altera/Kconfig              |   1 +
 drivers/net/ethernet/altera/Makefile             |   3 +-
 drivers/net/ethernet/altera/altera_tse.h         |   8 +
 drivers/net/ethernet/altera/altera_tse_ethtool.c |  29 ++
 drivers/net/ethernet/altera/altera_tse_main.c    | 113 +++++++-
 drivers/net/ethernet/altera/intel_fpga_tod.c     | 341 +++++++++++++++++++++++
 drivers/net/ethernet/altera/intel_fpga_tod.h     |  56 ++++
 7 files changed, 549 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/ethernet/altera/intel_fpga_tod.c
 create mode 100644 drivers/net/ethernet/altera/intel_fpga_tod.h
drivers/net/ethernet/altera/Kconfig +1 -0
index 914e56b91467..c24374f532f2 100644
@@ -3,6 +3,7 @@ config ALTERA_TSE
 	tristate "Altera Triple-Speed Ethernet MAC support"
 	depends on HAS_DMA
 	select PHYLIB
+	imply PTP_1588_CLOCK
 	help
 	  This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
 
drivers/net/ethernet/altera/Makefile +2 -1
index a52db80aee9f..fc2e460926b3 100644
@@ -5,4 +5,5 @@
 
 obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
 altera_tse-objs := altera_tse_main.o altera_tse_ethtool.o \
-altera_msgdma.o altera_sgdma.o altera_utils.o
+		   altera_msgdma.o altera_sgdma.o altera_utils.o \
+		   intel_fpga_tod.o
drivers/net/ethernet/altera/altera_tse.h +8 -0
index 79d02748c89d..87faecee80d2 100644
@@ -28,6 +28,8 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 
+#include "intel_fpga_tod.h"
+
 #define ALTERA_TSE_SW_RESET_WATCHDOG_CNTR	10000
 #define ALTERA_TSE_MAC_FIFO_WIDTH		4	/* TX/RX FIFO width in
 							 * bytes
@@ -417,6 +419,12 @@ struct altera_tse_private {
 	/* TSE Revision */
 	u32	revision;
 
+	/* Shared PTP structure */
+	struct intel_fpga_tod_private ptp_priv;
+	int hwts_tx_en;
+	int hwts_rx_en;
+	u32 has_ptp;
+
 	/* mSGDMA Rx Dispatcher address space */
 	void __iomem *rx_dma_csr;
 	void __iomem *rx_dma_desc;
drivers/net/ethernet/altera/altera_tse_ethtool.c +29 -0
index 420d77f00eab..b4bdb520c96a 100644
@@ -19,6 +19,7 @@
 #include <linux/ethtool.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/net_tstamp.h>
 #include <linux/phy.h>
 
 #include "altera_tse.h"
@@ -222,6 +223,33 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 		buf[i] = csrrd32(priv->mac_dev, i * 4);
 }
 
+static int tse_get_ts_info(struct net_device *dev,
+			   struct ethtool_ts_info *info)
+{
+	struct altera_tse_private *priv = netdev_priv(dev);
+
+	if (priv->has_ptp) {
+		if (priv->ptp_priv.ptp_clock)
+			info->phc_index =
+				ptp_clock_index(priv->ptp_priv.ptp_clock);
+		else
+			info->phc_index = -1;
+
+		info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
+					SOF_TIMESTAMPING_RX_HARDWARE |
+					SOF_TIMESTAMPING_RAW_HARDWARE;
+
+		info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+		info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+				   (1 << HWTSTAMP_FILTER_ALL);
+
+		return 0;
+	}
+
+	return ethtool_op_get_ts_info(dev, info);
+}
+
 static const struct ethtool_ops tse_ethtool_ops = {
 	.get_drvinfo = tse_get_drvinfo,
 	.get_regs_len = tse_reglen,
@@ -234,6 +262,7 @@ static const struct ethtool_ops tse_ethtool_ops = {
 	.set_msglevel = tse_set_msglevel,
 	.get_link_ksettings = phy_ethtool_get_link_ksettings,
 	.set_link_ksettings = phy_ethtool_set_link_ksettings,
+	.get_ts_info = tse_get_ts_info,
 };
 
 void altera_tse_set_ethtool_ops(struct net_device *netdev)
drivers/net/ethernet/altera/altera_tse_main.c +112 -1

169 lines not on this page · raw message

drivers/net/ethernet/altera/intel_fpga_tod.c new file +341 -0

341 lines not on this page · raw message

drivers/net/ethernet/altera/intel_fpga_tod.h new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.13.0
maintainer
#9 lore raw

Re: [PATCH v6 08/10] net: eth: altera: add support for ptp and timestamping

Quoted 10 lines · Joyce

From: Dalon Westergreen <[email protected]>

Add support for the ptp clock used with the tse, and update the driver to support timestamping when enabled. We also enable debugfs entries for the ptp clock to allow some user control and interaction with the ptp clock.

Please address the W=1 warning:

drivers/net/ethernet/altera/intel_fpga_tod.c:293:55: warning: Using plain integer as NULL pointer

author
#10 lore raw

PATCH v6 9/10 net: eth: altera: add msgdma prefetcher

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

Add support for the mSGDMA prefetcher. The prefetcher adds support for a linked list of descriptors in system memory. The prefetcher feeds these to the mSGDMA dispatcher.

The prefetcher is configured to poll for the next descriptor in the list to be owned by hardware, then pass the descriptor to the dispatcher. It will then poll the next descriptor until it is owned by hardware.

The dispatcher responses are written back to the appropriate descriptor, and the owned by hardware bit is cleared.

The driver sets up a linked list twice the tx and rx ring sizes, with the last descriptor pointing back to the first. This ensures that the ring of descriptors will always have inactive descriptors preventing the prefetcher from looping over and reusing descriptors inappropriately. The prefetcher will continuously loop over these descriptors. The driver modifies descriptors as required to update the skb address and length as well as the owned by hardware bit.

In addition to the above, the mSGDMA prefetcher can be used to handle rx and tx timestamps coming from the ethernet ip. These can be included in the prefetcher response in the descriptor.

---
v2: minor fixes and suggested edits
v3: queue is stopped before returning NETDEV_TX_BUSY
v4: fix build warnings
v5: hardcode poll_freq instead of reading from device tree and some minor edits
v6: no change

---
 drivers/net/ethernet/altera/Makefile               |   2 +-
 .../net/ethernet/altera/altera_msgdma_prefetcher.c | 431 +++++++++++++++++++++
 .../net/ethernet/altera/altera_msgdma_prefetcher.h |  30 ++
 .../ethernet/altera/altera_msgdmahw_prefetcher.h   |  87 +++++
 drivers/net/ethernet/altera/altera_tse.h           |  14 +
 drivers/net/ethernet/altera/altera_tse_main.c      |  40 ++
 6 files changed, 603 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/altera/altera_msgdma_prefetcher.c
 create mode 100644 drivers/net/ethernet/altera/altera_msgdma_prefetcher.h
 create mode 100644 drivers/net/ethernet/altera/altera_msgdmahw_prefetcher.h
drivers/net/ethernet/altera/Makefile +1 -1
index fc2e460926b3..4834e972e906 100644
@@ -6,4 +6,4 @@
 obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
 altera_tse-objs := altera_tse_main.o altera_tse_ethtool.o \
 		   altera_msgdma.o altera_sgdma.o altera_utils.o \
-		   intel_fpga_tod.o
+		   intel_fpga_tod.o altera_msgdma_prefetcher.o
drivers/net/ethernet/altera/altera_msgdma_prefetcher.c new file +431 -0

431 lines not on this page · raw message

drivers/net/ethernet/altera/altera_msgdma_prefetcher.h new file +30 -0
new file mode 100644
index 000000000000..6507c2805a05
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* MSGDMA Prefetcher driver for Altera ethernet devices
+ *
+ * Copyright (C) 2020 Intel Corporation. All rights reserved.
+ * Author(s):
+ *   Dalon Westergreen <[email protected]>
+ */
+
+#ifndef __ALTERA_PREF_MSGDMA_H__
+#define __ALTERA_PREF_MSGDMA_H__
+
+void msgdma_pref_reset(struct altera_tse_private *priv);
+void msgdma_pref_enable_txirq(struct altera_tse_private *priv);
+void msgdma_pref_enable_rxirq(struct altera_tse_private *priv);
+void msgdma_pref_disable_rxirq(struct altera_tse_private *priv);
+void msgdma_pref_disable_txirq(struct altera_tse_private *priv);
+void msgdma_pref_clear_rxirq(struct altera_tse_private *priv);
+void msgdma_pref_clear_txirq(struct altera_tse_private *priv);
+u32 msgdma_pref_tx_completions(struct altera_tse_private *priv);
+void msgdma_pref_add_rx_desc(struct altera_tse_private *priv,
+			     struct tse_buffer *buffer);
+netdev_tx_t msgdma_pref_tx_buffer(struct altera_tse_private *priv,
+				  struct tse_buffer *buffer);
+u32 msgdma_pref_rx_status(struct altera_tse_private *priv);
+int msgdma_pref_initialize(struct altera_tse_private *priv);
+void msgdma_pref_uninitialize(struct altera_tse_private *priv);
+void msgdma_pref_start_rxdma(struct altera_tse_private *priv);
+void msgdma_pref_start_txdma(struct altera_tse_private *priv);
+
+#endif /*  __ALTERA_PREF_MSGDMA_H__ */
drivers/net/ethernet/altera/altera_msgdmahw_prefetcher.h new file +87 -0

87 lines not on this page · raw message

drivers/net/ethernet/altera/altera_tse.h +14 -0
index 87faecee80d2..c966b8768ed5 100644
@@ -382,6 +382,7 @@ struct altera_tse_private;
 
 #define ALTERA_DTYPE_SGDMA 1
 #define ALTERA_DTYPE_MSGDMA 2
+#define ALTERA_DTYPE_MSGDMA_PREF 3
 
 /* standard DMA interface for SGDMA and MSGDMA */
 struct altera_dmaops {
@@ -434,6 +435,19 @@ struct altera_tse_private {
 	void __iomem *tx_dma_csr;
 	void __iomem *tx_dma_desc;
 
+	/* mSGDMA Rx Prefecher address space */
+	void __iomem *rx_pref_csr;
+	struct msgdma_pref_extended_desc *pref_rxdesc;
+	dma_addr_t pref_rxdescphys;
+	u32 pref_rx_prod;
+
+	/* mSGDMA Tx Prefecher address space */
+	void __iomem *tx_pref_csr;
+	struct msgdma_pref_extended_desc *pref_txdesc;
+	dma_addr_t pref_txdescphys;
+	u32 rx_poll_freq;
+	u32 tx_poll_freq;
+
 	/* Rx buffers queue */
 	struct tse_buffer *rx_ring;
 	u32 rx_cons;
drivers/net/ethernet/altera/altera_tse_main.c +40 -0
index acf9f5044c96..1cce8b2005f4 100644
@@ -44,6 +44,7 @@
 #include "altera_sgdma.h"
 #include "altera_msgdma.h"
 #include "intel_fpga_tod.h"
+#include "altera_msgdma_prefetcher.h"
 
 static atomic_t instance_count = ATOMIC_INIT(~0);
 /* Module parameters */
@@ -1496,6 +1497,23 @@ static int altera_tse_probe(struct platform_device *pdev)
 		priv->rxdescmem = resource_size(dma_res);
 		priv->rxdescmem_busaddr = dma_res->start;
 
+	} else if (priv->dmaops &&
+		   priv->dmaops->altera_dtype == ALTERA_DTYPE_MSGDMA_PREF) {
+		/* mSGDMA Rx Prefetcher address space */
+		ret = request_and_map(pdev, "rx_pref", &dma_res,
+				      &priv->rx_pref_csr);
+		if (ret)
+			goto err_free_netdev;
+
+		/* mSGDMA Tx Prefetcher address space */
+		ret = request_and_map(pdev, "tx_pref", &dma_res,
+				      &priv->tx_pref_csr);
+		if (ret)
+			goto err_free_netdev;
+
+		priv->rx_poll_freq = 128;
+		priv->tx_poll_freq = 128;
+
 	} else {
 		goto err_free_netdev;
 	}
@@ -1753,7 +1771,29 @@ static const struct altera_dmaops altera_dtype_msgdma = {
 	.start_txdma = NULL,
 };
 
+static const struct altera_dmaops altera_dtype_prefetcher = {
+	.altera_dtype = ALTERA_DTYPE_MSGDMA_PREF,
+	.dmamask = 64,
+	.reset_dma = msgdma_pref_reset,
+	.enable_txirq = msgdma_pref_enable_txirq,
+	.enable_rxirq = msgdma_pref_enable_rxirq,
+	.disable_txirq = msgdma_pref_disable_txirq,
+	.disable_rxirq = msgdma_pref_disable_rxirq,
+	.clear_txirq = msgdma_pref_clear_txirq,
+	.clear_rxirq = msgdma_pref_clear_rxirq,
+	.tx_buffer = msgdma_pref_tx_buffer,
+	.tx_completions = msgdma_pref_tx_completions,
+	.add_rx_desc = msgdma_pref_add_rx_desc,
+	.get_rx_status = msgdma_pref_rx_status,
+	.init_dma = msgdma_pref_initialize,
+	.uninit_dma = msgdma_pref_uninitialize,
+	.start_rxdma = msgdma_pref_start_rxdma,
+	.start_txdma = msgdma_pref_start_txdma,
+};
+
 static const struct of_device_id altera_tse_ids[] = {
+	{ .compatible = "altr,tse-msgdma-2.0",
+		.data = &altera_dtype_prefetcher, },
 	{ .compatible = "altr,tse-msgdma-1.0", .data = &altera_dtype_msgdma, },
 	{ .compatible = "altr,tse-1.0", .data = &altera_dtype_sgdma, },
 	{ .compatible = "ALTR,tse-1.0", .data = &altera_dtype_sgdma, },
Signature · 1 line
2.13.0
maintainer
#11 lore raw

Re: [PATCH v6 09/10] net: eth: altera: add msgdma prefetcher

Quoted 5 lines · Joyce

From: Dalon Westergreen <[email protected]>

Add support for the mSGDMA prefetcher. The prefetcher adds support for a linked list of descriptors in system memory. The prefetcher feeds these to the mSGDMA dispatcher.

This generates warnings on 32bit builds:

../drivers/net/ethernet/altera/altera_msgdma_prefetcher.c: In function ‘msgdma_pref_initialize’:
../drivers/net/ethernet/altera/altera_msgdma_prefetcher.c:97:51: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=]

   97 |   netdev_info(priv->dev, "%s: RX Desc mem at 0x%llx\n", __func__,
      |                                                ~~~^
      |                                                   |
      |                                                   long long unsigned int
      |                                                %x
   98 |        priv->pref_rxdescphys);
      |        ~~~~~~~~~~~~~~~~~~~~~                       
      |            |
      |            dma_addr_t {aka unsigned int}
../drivers/net/ethernet/altera/altera_msgdma_prefetcher.c:101:51: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=]
  101 |   netdev_info(priv->dev, "%s: TX Desc mem at 0x%llx\n", __func__,
      |                                                ~~~^
      |                                                   |
      |                                                   long long unsigned int
      |                                                %x
  102 |        priv->pref_txdescphys);
      |        ~~~~~~~~~~~~~~~~~~~~~                       
      |            |
      |            dma_addr_t {aka unsigned int}
author
#12 lore raw

PATCH v6 10/10 net: eth: altera: update devicetree bindings documentation

In reply to Ooi, Joyce

From: Dalon Westergreen <[email protected]>

Update devicetree bindings documentation to include msgdma prefetcher and ptp bindings.

---
v2: no change
v3: no change
v4: no change
v5: no change
v6: no change

---
 .../devicetree/bindings/net/altera_tse.txt         | 103 +++++++++++++++++----
 1 file changed, 84 insertions(+), 19 deletions(-)
Documentation/devicetree/bindings/net/altera_tse.txt +84 -19
index 0b7d4d3758ea..2f2d12603907 100644
@@ -2,53 +2,86 @@
 
 Required properties:
 - compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
-		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
+		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE,
+		and "altr,tse-msgdma-2.0" for MSGDMA with prefetcher based
+		implementations.
 		ALTR is supported for legacy device trees, but is deprecated.
 		altr should be used for all new designs.
 - reg: Address and length of the register set for the device. It contains
   the information of registers in the same order as described by reg-names
 - reg-names: Should contain the reg names
-  "control_port": MAC configuration space region
-  "tx_csr":       xDMA Tx dispatcher control and status space region
-  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
-  "rx_csr" :      xDMA Rx dispatcher control and status space region
-  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
-  "rx_resp":      MSGDMA Rx dispatcher response space region
-  "s1":		  SGDMA descriptor memory
 - interrupts: Should contain the TSE interrupts and it's mode.
 - interrupt-names: Should contain the interrupt names
-  "rx_irq":       xDMA Rx dispatcher interrupt
-  "tx_irq":       xDMA Tx dispatcher interrupt
+  "rx_irq":       DMA Rx dispatcher interrupt
+  "tx_irq":       DMA Tx dispatcher interrupt
 - rx-fifo-depth: MAC receive FIFO buffer depth in bytes
 - tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
 - phy-mode: See ethernet.txt in the same directory.
 - phy-handle: See ethernet.txt in the same directory.
 - phy-addr: See ethernet.txt in the same directory. A configuration should
 		include phy-handle or phy-addr.
-- altr,has-supplementary-unicast:
-		If present, TSE supports additional unicast addresses.
-		Otherwise additional unicast addresses are not supported.
-- altr,has-hash-multicast-filter:
-		If present, TSE supports a hash based multicast filter.
-		Otherwise, hash-based multicast filtering is not supported.
-
 - mdio device tree subnode: When the TSE has a phy connected to its local
 		mdio, there must be device tree subnode with the following
 		required properties:
-
 	- compatible: Must be "altr,tse-mdio".
 	- #address-cells: Must be <1>.
 	- #size-cells: Must be <0>.
 
 	For each phy on the mdio bus, there must be a node with the following
 	fields:
-
 	- reg: phy id used to communicate to phy.
 	- device_type: Must be "ethernet-phy".
 
 The MAC address will be determined using the optional properties defined in
 ethernet.txt.
 
+- altr,has-supplementary-unicast:
+		If present, TSE supports additional unicast addresses.
+		Otherwise additional unicast addresses are not supported.
+- altr,has-hash-multicast-filter:
+		If present, TSE supports a hash based multicast filter.
+		Otherwise, hash-based multicast filtering is not supported.
+- altr,has-ptp:
+		If present, TSE supports 1588 timestamping.  Currently only
+		supported with the msgdma prefetcher.
+- altr,tx-poll-cnt:
+		Optional cycle count for Tx prefetcher to poll descriptor
+		list.  If not present, defaults to 128, which at 125MHz is
+		roughly 1usec. Only for "altr,tse-msgdma-2.0".
+- altr,rx-poll-cnt:
+		Optional cycle count for Tx prefetcher to poll descriptor
+		list.  If not present, defaults to 128, which at 125MHz is
+		roughly 1usec. Only for "altr,tse-msgdma-2.0".
+
+Required registers by compatibility string:
+ - "altr,tse-1.0"
+	"control_port": MAC configuration space region
+	"tx_csr":       DMA Tx dispatcher control and status space region
+	"rx_csr" :      DMA Rx dispatcher control and status space region
+	"s1":		DMA descriptor memory
+
+ - "altr,tse-msgdma-1.0"
+	"control_port": MAC configuration space region
+	"tx_csr":       DMA Tx dispatcher control and status space region
+	"tx_desc":      DMA Tx dispatcher descriptor space region
+	"rx_csr" :      DMA Rx dispatcher control and status space region
+	"rx_desc":      DMA Rx dispatcher descriptor space region
+	"rx_resp":      DMA Rx dispatcher response space region
+
+ - "altr,tse-msgdma-2.0"
+	"control_port": MAC configuration space region
+	"tx_csr":       DMA Tx dispatcher control and status space region
+	"tx_pref":      DMA Tx prefetcher configuration space region
+	"rx_csr" :      DMA Rx dispatcher control and status space region
+	"rx_pref":      DMA Rx prefetcher configuration space region
+	"tod_ctrl":     Time of Day Control register only required when
+			timestamping support is enabled.  Timestamping is
+			only supported with the msgdma-2.0 implementation.
+
+Optional properties:
+- local-mac-address: See ethernet.txt in the same directory.
+- max-frame-size: See ethernet.txt in the same directory.
+
 Example:
 
 	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
@@ -86,6 +119,11 @@ Example:
 				device_type = "ethernet-phy";
 			};
 
+			phy2: ethernet-phy@2 {
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+
 		};
 	};
 
@@ -111,3 +149,30 @@ Example:
 		altr,has-hash-multicast-filter;
 		phy-handle = <&phy1>;
 	};
+
+
+	tse_sub_2_eth_tse_0: ethernet@1,00002000 {
+		compatible = "altr,tse-msgdma-2.0";
+		reg = 	<0x00000001 0x00002000 0x00000400>,
+			<0x00000001 0x00002400 0x00000020>,
+			<0x00000001 0x00002420 0x00000020>,
+			<0x00000001 0x00002440 0x00000020>,
+			<0x00000001 0x00002460 0x00000020>,
+			<0x00000001 0x00002480 0x00000040>;
+		reg-names = "control_port", "rx_csr", "rx_pref","tx_csr", "tx_pref", "tod_ctrl";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 45 4>, <0 44 4>;
+		interrupt-names = "rx_irq", "tx_irq";
+		rx-fifo-depth = <2048>;
+		tx-fifo-depth = <2048>;
+		address-bits = <48>;
+		max-frame-size = <1500>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		phy-mode = "sgmii";
+		altr,has-supplementary-unicast;
+		altr,has-hash-multicast-filter;
+		altr,has-ptp;
+		altr,tx-poll-cnt = <128>;
+		altr,rx-poll-cnt = <32>;
+		phy-handle = <&phy2>;
+	};
Signature · 1 line
2.13.0