Skip to contentSkip to conversation

Fixed issue in bluetooth-meshd which causes HCI

PATCH In review Daan Pape 2 participants 3 messages Aug 18, 2020 – Aug 19, 2020 Bluetooth drivers

lore
Share & tools
lore

Daan Pape

author
#0 lore raw

cover Fixed issue in bluetooth-meshd which causes HCI

I had compiled bluez for OpenWRT and was running the bluetooth-meshd daemon with a Fanstel BT680T module which implement the Bluetooth 5.0 core specification.

The daemon did not properly start and failed with error:

LE Scan enable failed (0x12)

This error is described on page 2496 of the Bluetooth Core Specification Version 5.2 and is caused by the fact that no random address was initialized. The issue is resolved by falling back to using the default HCI advertisement settings which use the public device address in it's advertisements.

This is the first time that I contribute to Bluez so please forgive me if I made any styling mistake in the patch format. I also did not include my details in the 'AUTHORS' file just yet as I first wanted to wait for your reaction. In case the patch is accepted my name can be added to the 'AUTHORS' file as:

Daan Pape <[email protected]>

Please do not hesitate to ask any further questions if neccesary.

Kind regards,
Daan Pape

Daan Pape (1):
Fixed issue in bluetooth-meshd which causes HCI error 0x12 when LE
scanning is enabled because no random address was set. This is fixed by using the default HCI own device address option.

 mesh/mesh-io-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH 1/1 Fixed issue in bluetooth-meshd which causes HCI error 0x12 when LE scanning is enabled because no random address was set. This is fixed by using the default HCI own device address option.

---
 mesh/mesh-io-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
mesh/mesh-io-generic.c +2 -2
index 67b13a1b9..65fd1c7b9 100644
@@ -321,7 +321,7 @@ static void scan_disable_rsp(const void *buf, uint8_t size,
 	cmd.type = pvt->active ? 0x01 : 0x00;	/* Passive/Active scanning */
 	cmd.interval = L_CPU_TO_LE16(0x0010);	/* 10 ms */
 	cmd.window = L_CPU_TO_LE16(0x0010);	/* 10 ms */
-	cmd.own_addr_type = 0x01;		/* ADDR_TYPE_RANDOM */
+	cmd.own_addr_type = 0x00; 		/* Public Device Address */
 	cmd.filter_policy = 0x00;		/* Accept all */
 
 	bt_hci_send(pvt->hci, BT_HCI_CMD_LE_SET_SCAN_PARAMETERS,
@@ -579,7 +579,7 @@ static void set_send_adv_params(const void *buf, uint8_t size,
 	cmd.min_interval = L_CPU_TO_LE16(hci_interval);
 	cmd.max_interval = L_CPU_TO_LE16(hci_interval);
 	cmd.type = 0x03; /* ADV_NONCONN_IND */
-	cmd.own_addr_type = 0x01; /* ADDR_TYPE_RANDOM */
+	cmd.own_addr_type = 0x00; /* Public Device Address */
 	cmd.direct_addr_type = 0x00;
 	memset(cmd.direct_addr, 0, 6);
 	cmd.channel_map = 0x07;
Signature · 1 line
2.20.1
#2 lore raw

Re: [PATCH BlueZ 1/1] Fixed issue in bluetooth-meshd which causes HCI error 0x12 when LE scanning is enabled because no random address was set. This is fixed by using the default HCI own device address option.

Hi Daan,

Quoted 9 lines · Daan Pape
---
 mesh/mesh-io-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
mesh/mesh-io-generic.c +0 -0
index 67b13a1b9..65fd1c7b9 100644

mesh/mesh-io-generic.c static void scan_disable_rsp(const void *buf, uint8_t size, · line 326

Quoted 7 lines
mesh/mesh-io-generic.c +1 -1
@@ -321,7 +321,7 @@ static void scan_disable_rsp(const void *buf, uint8_t size,
 	cmd.type = pvt->active ? 0x01 : 0x00;	/* Passive/Active scanning */
 	cmd.interval = L_CPU_TO_LE16(0x0010);	/* 10 ms */
 	cmd.window = L_CPU_TO_LE16(0x0010);	/* 10 ms */
-	cmd.own_addr_type = 0x01;		/* ADDR_TYPE_RANDOM */
+	cmd.own_addr_type = 0x00; 		/* Public Device Address */
 	cmd.filter_policy = 0x00;		/* Accept all */
 

Our policy is to *always* use random addressing for outbound mesh addressing. So if this is the root cause of the warning, we will want to fix it in such a way that random addressing works. This should only be an issue when starting up, so perhaps we just need to add a random address set into the startup command chain.

Quoted 10 lines
mesh/mesh-io-generic.c +1 -1
 	bt_hci_send(pvt->hci, BT_HCI_CMD_LE_SET_SCAN_PARAMETERS,
@@ -579,7 +579,7 @@ static void set_send_adv_params(const void *buf, uint8_t size,
 	cmd.min_interval = L_CPU_TO_LE16(hci_interval);
 	cmd.max_interval = L_CPU_TO_LE16(hci_interval);
 	cmd.type = 0x03; /* ADV_NONCONN_IND */
-	cmd.own_addr_type = 0x01; /* ADDR_TYPE_RANDOM */
+	cmd.own_addr_type = 0x00; /* Public Device Address */
 	cmd.direct_addr_type = 0x00;
 	memset(cmd.direct_addr, 0, 6);
 	cmd.channel_map = 0x07;