Skip to contentSkip to conversation

usb: cdns3: add runtime pm support

PATCH Superseded Peter Chen 3 participants 7 messages Aug 21, 2020 – Aug 24, 2020

Subsystems (4)

v6 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Peter Chen

author
#0 lore raw

v6 cover usb: cdns3: add runtime pm support

Hi Felipe,

In this series, it adds cdns3 runtime PM support, and verified at NXP i.MX8QM and i.MX8QXP platforms.

Changes for v6:
- Add Pawel's reviewed-by
- Remove xhci-plat patches, which was sent by xhci patch series [1]
- Rebased on the newest usb/next

Changes for v5:
- Address Greg's comments for more obvious PHY power controller APIs [Patch 1/2]
- One build warning from kernel test robot

Changes for v4:
- Address Jun Li's comments for cdns3 core changes [Patch 2]
- Some small fixes for cdns3-imx for CLK_125_REQ bit
- Rebase the latest usb-next

Changes for v3:
Add Jun Li’s reviewed-by [Patch 1 and Patch 6]
Add Mathias’s acked-by [Patch 4-6]
Some wakeup logic improvement [Patch 2]
Add dedicated wakeup interrupt for core, and improve the commit log [Patch] Fix build error found by kbuild test robot [Patch 3]
Using xhci_plat_priv quirk for skip PHY initialization [patch 7, patch 9] Some other typo and tiny improvements

Changes for v2:
- Add the 1st patch. Without it, the build on the usb-next will fail.
- Change the subject for cover letter a little to reflect all contents.

[1] https://www.spinics.net/lists/linux-usb/msg199399.html

Peter Chen (3):
usb: cdns3: introduce set_phy_power_on{off} APIs
usb: cdns3: add runtime PM support
usb: cdns3: imx: add glue layer runtime pm implementation

 drivers/usb/cdns3/cdns3-imx.c | 203 ++++++++++++++++++++++++++++++++--
 drivers/usb/cdns3/core.c      | 196 ++++++++++++++++++++++++++------
 drivers/usb/cdns3/core.h      |  16 +++
 drivers/usb/cdns3/drd.c       |   3 +
 drivers/usb/cdns3/gadget.c    |   4 +
 drivers/usb/cdns3/host.c      |   7 ++
 6 files changed, 386 insertions(+), 43 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v6 1/3 usb: cdns3: introduce set_phy_power_on{off} APIs

Since we have both USB2 and USB3 PHYs for cdns3 controller, it is better we have unity APIs to handle both USB2 and USB3's power, it could simplify code for error handling and further power management implementation.

---
 drivers/usb/cdns3/core.c | 43 ++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 15 deletions(-)
drivers/usb/cdns3/core.c +28 -15
index 5c1586ec7824..e56dbb6a898c 100644
@@ -371,6 +371,27 @@ static int cdns3_role_set(struct usb_role_switch *sw, enum usb_role role)
 	return ret;
 }
 
+static int set_phy_power_on(struct cdns3 *cdns)
+{
+	int ret;
+
+	ret = phy_power_on(cdns->usb2_phy);
+	if (ret)
+		return ret;
+
+	ret = phy_power_on(cdns->usb3_phy);
+	if (ret)
+		phy_power_off(cdns->usb2_phy);
+
+	return ret;
+}
+
+static void set_phy_power_off(struct cdns3 *cdns)
+{
+	phy_power_off(cdns->usb3_phy);
+	phy_power_off(cdns->usb2_phy);
+}
+
 /**
  * cdns3_probe - probe for cdns3 core device
  * @pdev: Pointer to cdns3 core platform device
@@ -463,14 +484,10 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (ret)
 		goto err1;
 
-	ret = phy_power_on(cdns->usb2_phy);
+	ret = set_phy_power_on(cdns);
 	if (ret)
 		goto err2;
 
-	ret = phy_power_on(cdns->usb3_phy);
-	if (ret)
-		goto err3;
-
 	sw_desc.set = cdns3_role_set;
 	sw_desc.get = cdns3_role_get;
 	sw_desc.allow_userspace_control = true;
@@ -482,16 +499,16 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (IS_ERR(cdns->role_sw)) {
 		ret = PTR_ERR(cdns->role_sw);
 		dev_warn(dev, "Unable to register Role Switch\n");
-		goto err4;
+		goto err3;
 	}
 
 	ret = cdns3_drd_init(cdns);
 	if (ret)
-		goto err5;
+		goto err4;
 
 	ret = cdns3_core_init_role(cdns);
 	if (ret)
-		goto err5;
+		goto err4;
 
 	device_set_wakeup_capable(dev, true);
 	pm_runtime_set_active(dev);
@@ -508,14 +525,11 @@ static int cdns3_probe(struct platform_device *pdev)
 	dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
 
 	return 0;
-err5:
+err4:
 	cdns3_drd_exit(cdns);
 	usb_role_switch_unregister(cdns->role_sw);
-err4:
-	phy_power_off(cdns->usb3_phy);
-
 err3:
-	phy_power_off(cdns->usb2_phy);
+	set_phy_power_off(cdns);
 err2:
 	phy_exit(cdns->usb3_phy);
 err1:
@@ -539,8 +553,7 @@ static int cdns3_remove(struct platform_device *pdev)
 	pm_runtime_put_noidle(&pdev->dev);
 	cdns3_exit_roles(cdns);
 	usb_role_switch_unregister(cdns->role_sw);
-	phy_power_off(cdns->usb2_phy);
-	phy_power_off(cdns->usb3_phy);
+	set_phy_power_off(cdns);
 	phy_exit(cdns->usb2_phy);
 	phy_exit(cdns->usb3_phy);
 	return 0;
Signature · 1 line
2.17.1
author
#2 lore raw

PATCH v6 2/3 usb: cdns3: add runtime PM support

In reply to Peter Chen

Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM.

One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port.

When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again.

The API platform_suspend is introduced for glue layer to implement platform specific PM sequence.

---
 drivers/usb/cdns3/core.c   | 153 ++++++++++++++++++++++++++++++++-----
 drivers/usb/cdns3/core.h   |  16 ++++
 drivers/usb/cdns3/drd.c    |   3 +
 drivers/usb/cdns3/gadget.c |   4 +
 drivers/usb/cdns3/host.c   |   7 ++
 5 files changed, 166 insertions(+), 17 deletions(-)
drivers/usb/cdns3/core.c +136 -17
index e56dbb6a898c..8e588eef38df 100644
@@ -392,6 +392,30 @@ static void set_phy_power_off(struct cdns3 *cdns)
 	phy_power_off(cdns->usb2_phy);
 }
 
+/**
+ * cdns3_wakeup_irq - interrupt handler for wakeup events
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_wakeup_irq(int irq, void *data)
+{
+	struct cdns3 *cdns = data;
+
+	if (cdns->in_lpm) {
+		disable_irq_nosync(irq);
+		cdns->wakeup_pending = true;
+		if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev)
+			pm_request_resume(&cdns->host_dev->dev);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
 /**
  * cdns3_probe - probe for cdns3 core device
  * @pdev: Pointer to cdns3 core platform device
@@ -418,6 +442,7 @@ static int cdns3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	cdns->dev = dev;
+	cdns->pdata = dev_get_platdata(dev);
 
 	platform_set_drvdata(pdev, cdns);
 
@@ -466,6 +491,15 @@ static int cdns3_probe(struct platform_device *pdev)
 
 	cdns->otg_res = *res;
 
+	cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (cdns->wakeup_irq == -EPROBE_DEFER)
+		return cdns->wakeup_irq;
+
+	if (cdns->wakeup_irq < 0) {
+		dev_dbg(dev, "couldn't get wakeup irq\n");
+		cdns->wakeup_irq = 0x0;
+	}
+
 	mutex_init(&cdns->mutex);
 
 	cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
@@ -502,6 +536,19 @@ static int cdns3_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
+	if (cdns->wakeup_irq) {
+		ret = devm_request_threaded_irq(cdns->dev, cdns->wakeup_irq,
+						cdns3_wakeup_irq,
+						NULL,
+						IRQF_SHARED,
+						dev_name(cdns->dev), cdns);
+
+		if (ret) {
+			dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
+			goto err3;
+		}
+	}
+
 	ret = cdns3_drd_init(cdns);
 	if (ret)
 		goto err4;
@@ -510,9 +557,11 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (ret)
 		goto err4;
 
+	spin_lock_init(&cdns->lock);
 	device_set_wakeup_capable(dev, true);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
 
 	/*
 	 * The controller needs less time between bus and controller suspend,
@@ -559,52 +608,122 @@ static int cdns3_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 
-static int cdns3_suspend(struct device *dev)
+static int cdns3_set_platform_suspend(struct device *dev,
+		bool suspend, bool wakeup)
+{
+	struct cdns3 *cdns = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (cdns->pdata && cdns->pdata->platform_suspend)
+		ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
+
+	return ret;
+}
+
+static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
 {
 	struct cdns3 *cdns = dev_get_drvdata(dev);
+	bool wakeup;
 	unsigned long flags;
 
-	if (cdns->role == USB_ROLE_HOST)
+	if (cdns->in_lpm)
 		return 0;
 
-	if (pm_runtime_status_suspended(dev))
-		pm_runtime_resume(dev);
+	if (PMSG_IS_AUTO(msg))
+		wakeup = true;
+	else
+		wakeup = device_may_wakeup(dev);
 
-	if (cdns->roles[cdns->role]->suspend) {
-		spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
-		cdns->roles[cdns->role]->suspend(cdns, false);
-		spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
-	}
+	cdns3_set_platform_suspend(cdns->dev, true, wakeup);
+	set_phy_power_off(cdns);
+	spin_lock_irqsave(&cdns->lock, flags);
+	cdns->in_lpm = true;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
 
 	return 0;
 }
 
-static int cdns3_resume(struct device *dev)
+static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
 {
 	struct cdns3 *cdns = dev_get_drvdata(dev);
+	int ret;
 	unsigned long flags;
 
-	if (cdns->role == USB_ROLE_HOST)
+	if (!cdns->in_lpm)
 		return 0;
 
-	if (cdns->roles[cdns->role]->resume) {
-		spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
+	ret = set_phy_power_on(cdns);
+	if (ret)
+		return ret;
+
+	cdns3_set_platform_suspend(cdns->dev, false, false);
+
+	spin_lock_irqsave(&cdns->lock, flags);
+	if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg))
 		cdns->roles[cdns->role]->resume(cdns, false);
-		spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
+
+	cdns->in_lpm = false;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	if (cdns->wakeup_pending) {
+		cdns->wakeup_pending = false;
+		enable_irq(cdns->wakeup_irq);
+	}
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+	return ret;
+}
+
+static int cdns3_runtime_suspend(struct device *dev)
+{
+	return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int cdns3_runtime_resume(struct device *dev)
+{
+	return cdns3_controller_resume(dev, PMSG_AUTO_RESUME);
+}
+#ifdef CONFIG_PM_SLEEP
+
+static int cdns3_suspend(struct device *dev)
+{
+	struct cdns3 *cdns = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	if (pm_runtime_status_suspended(dev))
+		pm_runtime_resume(dev);
+
+	if (cdns->roles[cdns->role]->suspend) {
+		spin_lock_irqsave(&cdns->lock, flags);
+		cdns->roles[cdns->role]->suspend(cdns, false);
+		spin_unlock_irqrestore(&cdns->lock, flags);
 	}
 
+	return cdns3_controller_suspend(dev, PMSG_SUSPEND);
+}
+
+static int cdns3_resume(struct device *dev)
+{
+	int ret;
+
+	ret = cdns3_controller_resume(dev, PMSG_RESUME);
+	if (ret)
+		return ret;
+
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-	return 0;
+	return ret;
 }
-#endif
+#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops cdns3_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
+	SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
 };
 
 #ifdef CONFIG_OF
drivers/usb/cdns3/core.h +16 -0
index 1ad1f1fe61e9..1b1707796db2 100644
@@ -38,6 +38,12 @@ struct cdns3_role_driver {
 };
 
 #define CDNS3_XHCI_RESOURCES_NUM	2
+
+struct cdns3_platform_data {
+	int (*platform_suspend)(struct device *dev,
+			bool suspend, bool wakeup);
+};
+
 /**
  * struct cdns3 - Representation of Cadence USB3 DRD controller.
  * @dev: pointer to Cadence device struct
@@ -50,6 +56,7 @@ struct cdns3_role_driver {
  * @otg_regs: pointer to base of otg registers
  * @otg_irq: irq number for otg controller
  * @dev_irq: irq number for device controller
+ * @wakeup_irq: irq number for wakeup event, it is optional
  * @roles: array of supported roles for this controller
  * @role: current role
  * @host_dev: the child host device pointer for cdns3 core
@@ -62,6 +69,10 @@ struct cdns3_role_driver {
  *           This field based on firmware setting, kernel configuration
  *           and hardware configuration.
  * @role_sw: pointer to role switch object.
+ * @in_lpm: indicate the controller is in low power mode
+ * @wakeup_pending: wakeup interrupt pending
+ * @pdata: platform data from glue layer
+ * @lock: spinlock structure
  */
 struct cdns3 {
 	struct device			*dev;
@@ -79,6 +90,7 @@ struct cdns3 {
 
 	int				otg_irq;
 	int				dev_irq;
+	int				wakeup_irq;
 	struct cdns3_role_driver	*roles[USB_ROLE_DEVICE + 1];
 	enum usb_role			role;
 	struct platform_device		*host_dev;
@@ -89,6 +101,10 @@ struct cdns3 {
 	struct mutex			mutex;
 	enum usb_dr_mode		dr_mode;
 	struct usb_role_switch		*role_sw;
+	bool				in_lpm;
+	bool				wakeup_pending;
+	struct cdns3_platform_data	*pdata;
+	spinlock_t			lock;
 };
 
 int cdns3_hw_role_switch(struct cdns3 *cdns);
drivers/usb/cdns3/drd.c +3 -0
index 6234bcd6158a..5f2685cadf5e 100644
@@ -293,6 +293,9 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data)
 	if (cdns->dr_mode != USB_DR_MODE_OTG)
 		return IRQ_NONE;
 
+	if (cdns->in_lpm)
+		return ret;
+
 	reg = readl(&cdns->otg_regs->ivect);
 
 	if (!reg)
drivers/usb/cdns3/gadget.c +4 -0
index dea649ee173b..8bbb38cd560b 100644
@@ -1769,9 +1769,13 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
 static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
 {
 	struct cdns3_device *priv_dev = data;
+	struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev);
 	irqreturn_t ret = IRQ_NONE;
 	u32 reg;
 
+	if (cdns->in_lpm)
+		return ret;
+
 	/* check USB device interrupt */
 	reg = readl(&priv_dev->regs->usb_ists);
 	if (reg) {
drivers/usb/cdns3/host.c +7 -0
index 36c63d9ecd37..b3e2cb69762c 100644
@@ -13,11 +13,13 @@
 #include "core.h"
 #include "drd.h"
 #include "host-export.h"
+#include <linux/usb/hcd.h>
 
 static int __cdns3_host_init(struct cdns3 *cdns)
 {
 	struct platform_device *xhci;
 	int ret;
+	struct usb_hcd *hcd;
 
 	cdns3_drd_host_on(cdns);
 
@@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns)
 		goto err1;
 	}
 
+	/* Glue needs to access xHCI region register for Power management */
+	hcd = platform_get_drvdata(xhci);
+	if (hcd)
+		cdns->xhci_regs = hcd->regs;
+
 	return 0;
 err1:
 	platform_device_put(xhci);
Signature · 1 line
2.17.1
#3 lore raw

Re: [PATCH v6 2/3] usb: cdns3: add runtime PM support

Quoted 36 lines · Peter Chen

Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM.

One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port.

When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again.

The API platform_suspend is introduced for glue layer to implement platform specific PM sequence.

---
 drivers/usb/cdns3/core.c   | 153 ++++++++++++++++++++++++++++++++-----
 drivers/usb/cdns3/core.h   |  16 ++++
 drivers/usb/cdns3/drd.c    |   3 +
 drivers/usb/cdns3/gadget.c |   4 +
 drivers/usb/cdns3/host.c   |   7 ++
 5 files changed, 166 insertions(+), 17 deletions(-)
drivers/usb/cdns3/core.c +0 -0
index e56dbb6a898c..8e588eef38df 100644

drivers/usb/cdns3/core.c static void set_phy_power_off(struct cdns3 *cdns) · line 397

Quoted 6 lines
drivers/usb/cdns3/core.c +3 -0
@@ -392,6 +392,30 @@ static void set_phy_power_off(struct cdns3 *cdns)
 	phy_power_off(cdns->usb2_phy);
 }
 
+/**
+ * cdns3_wakeup_irq - interrupt handler for wakeup events
+ *

remove blank line?
"Do not leave a blank line between the function description and the arguments, nor between the arguments"
see kernel-doc.rst, Function parameters

Quoted 81 lines
drivers/usb/cdns3/core.c +46 -0
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_wakeup_irq(int irq, void *data)
+{
+	struct cdns3 *cdns = data;
+
+	if (cdns->in_lpm) {
+		disable_irq_nosync(irq);
+		cdns->wakeup_pending = true;
+		if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev)
+			pm_request_resume(&cdns->host_dev->dev);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
 /**
  * cdns3_probe - probe for cdns3 core device
  * @pdev: Pointer to cdns3 core platform device
@@ -418,6 +442,7 @@ static int cdns3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	cdns->dev = dev;
+	cdns->pdata = dev_get_platdata(dev);
 
 	platform_set_drvdata(pdev, cdns);
 
@@ -466,6 +491,15 @@ static int cdns3_probe(struct platform_device *pdev)
 
 	cdns->otg_res = *res;
 
+	cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (cdns->wakeup_irq == -EPROBE_DEFER)
+		return cdns->wakeup_irq;
+
+	if (cdns->wakeup_irq < 0) {
+		dev_dbg(dev, "couldn't get wakeup irq\n");
+		cdns->wakeup_irq = 0x0;
+	}
+
 	mutex_init(&cdns->mutex);
 
 	cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
@@ -502,6 +536,19 @@ static int cdns3_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
+	if (cdns->wakeup_irq) {
+		ret = devm_request_threaded_irq(cdns->dev, cdns->wakeup_irq,
+						cdns3_wakeup_irq,
+						NULL,
+						IRQF_SHARED,
+						dev_name(cdns->dev), cdns);
+
+		if (ret) {
+			dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
+			goto err3;
+		}
+	}
+
 	ret = cdns3_drd_init(cdns);
 	if (ret)
 		goto err4;
@@ -510,9 +557,11 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (ret)
 		goto err4;
 
+	spin_lock_init(&cdns->lock);
 	device_set_wakeup_capable(dev, true);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
 
 	/*
 	 * The controller needs less time between bus and controller suspend,

drivers/usb/cdns3/core.c static int cdns3_remove(struct platform_device *pdev) · line 611

Quoted 5 lines
drivers/usb/cdns3/core.c +1 -1
@@ -559,52 +608,122 @@ static int cdns3_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM

What about using __maybe_unused instead of #ifdef ?

Quoted 251 lines
drivers/usb/cdns3/core.c +86 -16
-static int cdns3_suspend(struct device *dev)
+static int cdns3_set_platform_suspend(struct device *dev,
+		bool suspend, bool wakeup)
+{
+	struct cdns3 *cdns = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (cdns->pdata && cdns->pdata->platform_suspend)
+		ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
+
+	return ret;
+}
+
+static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
 {
 	struct cdns3 *cdns = dev_get_drvdata(dev);
+	bool wakeup;
 	unsigned long flags;
 
-	if (cdns->role == USB_ROLE_HOST)
+	if (cdns->in_lpm)
 		return 0;
 
-	if (pm_runtime_status_suspended(dev))
-		pm_runtime_resume(dev);
+	if (PMSG_IS_AUTO(msg))
+		wakeup = true;
+	else
+		wakeup = device_may_wakeup(dev);
 
-	if (cdns->roles[cdns->role]->suspend) {
-		spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
-		cdns->roles[cdns->role]->suspend(cdns, false);
-		spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
-	}
+	cdns3_set_platform_suspend(cdns->dev, true, wakeup);
+	set_phy_power_off(cdns);
+	spin_lock_irqsave(&cdns->lock, flags);
+	cdns->in_lpm = true;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
 
 	return 0;
 }
 
-static int cdns3_resume(struct device *dev)
+static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
 {
 	struct cdns3 *cdns = dev_get_drvdata(dev);
+	int ret;
 	unsigned long flags;
 
-	if (cdns->role == USB_ROLE_HOST)
+	if (!cdns->in_lpm)
 		return 0;
 
-	if (cdns->roles[cdns->role]->resume) {
-		spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
+	ret = set_phy_power_on(cdns);
+	if (ret)
+		return ret;
+
+	cdns3_set_platform_suspend(cdns->dev, false, false);
+
+	spin_lock_irqsave(&cdns->lock, flags);
+	if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg))
 		cdns->roles[cdns->role]->resume(cdns, false);
-		spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
+
+	cdns->in_lpm = false;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	if (cdns->wakeup_pending) {
+		cdns->wakeup_pending = false;
+		enable_irq(cdns->wakeup_irq);
+	}
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+	return ret;
+}
+
+static int cdns3_runtime_suspend(struct device *dev)
+{
+	return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int cdns3_runtime_resume(struct device *dev)
+{
+	return cdns3_controller_resume(dev, PMSG_AUTO_RESUME);
+}
+#ifdef CONFIG_PM_SLEEP
+
+static int cdns3_suspend(struct device *dev)
+{
+	struct cdns3 *cdns = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	if (pm_runtime_status_suspended(dev))
+		pm_runtime_resume(dev);
+
+	if (cdns->roles[cdns->role]->suspend) {
+		spin_lock_irqsave(&cdns->lock, flags);
+		cdns->roles[cdns->role]->suspend(cdns, false);
+		spin_unlock_irqrestore(&cdns->lock, flags);
 	}
 
+	return cdns3_controller_suspend(dev, PMSG_SUSPEND);
+}
+
+static int cdns3_resume(struct device *dev)
+{
+	int ret;
+
+	ret = cdns3_controller_resume(dev, PMSG_RESUME);
+	if (ret)
+		return ret;
+
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-	return 0;
+	return ret;
 }
-#endif
+#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops cdns3_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
+	SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
 };
 
 #ifdef CONFIG_OF
drivers/usb/cdns3/core.h +16 -0
index 1ad1f1fe61e9..1b1707796db2 100644
@@ -38,6 +38,12 @@ struct cdns3_role_driver {
 };
 
 #define CDNS3_XHCI_RESOURCES_NUM	2
+
+struct cdns3_platform_data {
+	int (*platform_suspend)(struct device *dev,
+			bool suspend, bool wakeup);
+};
+
 /**
  * struct cdns3 - Representation of Cadence USB3 DRD controller.
  * @dev: pointer to Cadence device struct
@@ -50,6 +56,7 @@ struct cdns3_role_driver {
  * @otg_regs: pointer to base of otg registers
  * @otg_irq: irq number for otg controller
  * @dev_irq: irq number for device controller
+ * @wakeup_irq: irq number for wakeup event, it is optional
  * @roles: array of supported roles for this controller
  * @role: current role
  * @host_dev: the child host device pointer for cdns3 core
@@ -62,6 +69,10 @@ struct cdns3_role_driver {
  *           This field based on firmware setting, kernel configuration
  *           and hardware configuration.
  * @role_sw: pointer to role switch object.
+ * @in_lpm: indicate the controller is in low power mode
+ * @wakeup_pending: wakeup interrupt pending
+ * @pdata: platform data from glue layer
+ * @lock: spinlock structure
  */
 struct cdns3 {
 	struct device			*dev;
@@ -79,6 +90,7 @@ struct cdns3 {
 
 	int				otg_irq;
 	int				dev_irq;
+	int				wakeup_irq;
 	struct cdns3_role_driver	*roles[USB_ROLE_DEVICE + 1];
 	enum usb_role			role;
 	struct platform_device		*host_dev;
@@ -89,6 +101,10 @@ struct cdns3 {
 	struct mutex			mutex;
 	enum usb_dr_mode		dr_mode;
 	struct usb_role_switch		*role_sw;
+	bool				in_lpm;
+	bool				wakeup_pending;
+	struct cdns3_platform_data	*pdata;
+	spinlock_t			lock;
 };
 
 int cdns3_hw_role_switch(struct cdns3 *cdns);
drivers/usb/cdns3/drd.c +3 -0
index 6234bcd6158a..5f2685cadf5e 100644
@@ -293,6 +293,9 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data)
 	if (cdns->dr_mode != USB_DR_MODE_OTG)
 		return IRQ_NONE;
 
+	if (cdns->in_lpm)
+		return ret;
+
 	reg = readl(&cdns->otg_regs->ivect);
 
 	if (!reg)
drivers/usb/cdns3/gadget.c +4 -0
index dea649ee173b..8bbb38cd560b 100644
@@ -1769,9 +1769,13 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
 static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
 {
 	struct cdns3_device *priv_dev = data;
+	struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev);
 	irqreturn_t ret = IRQ_NONE;
 	u32 reg;
 
+	if (cdns->in_lpm)
+		return ret;
+
 	/* check USB device interrupt */
 	reg = readl(&priv_dev->regs->usb_ists);
 	if (reg) {
drivers/usb/cdns3/host.c +7 -0
index 36c63d9ecd37..b3e2cb69762c 100644
@@ -13,11 +13,13 @@
 #include "core.h"
 #include "drd.h"
 #include "host-export.h"
+#include <linux/usb/hcd.h>
 
 static int __cdns3_host_init(struct cdns3 *cdns)
 {
 	struct platform_device *xhci;
 	int ret;
+	struct usb_hcd *hcd;
 
 	cdns3_drd_host_on(cdns);
 
@@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns)
 		goto err1;
 	}
 
+	/* Glue needs to access xHCI region register for Power management */
+	hcd = platform_get_drvdata(xhci);
+	if (hcd)
+		cdns->xhci_regs = hcd->regs;
+
 	return 0;
 err1:
 	platform_device_put(xhci);
author
#4 lore raw

Re: [PATCH v6 2/3] usb: cdns3: add runtime PM support

Quoted 40 lines · Chunfeng Yun
Quoted 39 lines · Peter Chen

Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM.

One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port.

When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again.

The API platform_suspend is introduced for glue layer to implement platform specific PM sequence.

---
 drivers/usb/cdns3/core.c   | 153 ++++++++++++++++++++++++++++++++-----
 drivers/usb/cdns3/core.h   |  16 ++++
 drivers/usb/cdns3/drd.c    |   3 +
 drivers/usb/cdns3/gadget.c |   4 +
 drivers/usb/cdns3/host.c   |   7 ++
 5 files changed, 166 insertions(+), 17 deletions(-)
drivers/usb/cdns3/core.c +0 -0
index e56dbb6a898c..8e588eef38df 100644
@@ -392,6 +392,30 @@ static void set_phy_power_off(struct cdns3 *cdns)
 	phy_power_off(cdns->usb2_phy);
 }
 
Quoted 7 lines

drivers/usb/cdns3/core.c static void set_phy_power_off(struct cdns3 *cdns) · line 397

Quoted 3 lines
drivers/usb/cdns3/core.c +3 -0
+/**
+ * cdns3_wakeup_irq - interrupt handler for wakeup events
+ *

remove blank line?
"Do not leave a blank line between the function description and the arguments, nor between the arguments"
see kernel-doc.rst, Function parameters

Thanks, will change.

Quoted 9 lines

drivers/usb/cdns3/core.c static int cdns3_remove(struct platform_device *pdev) · line 611

Quoted 8 lines
drivers/usb/cdns3/core.c +1 -1
 	/*
 	 * The controller needs less time between bus and controller suspend,
@@ -559,52 +608,122 @@ static int cdns3_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM

What about using __maybe_unused instead of #ifdef ?

It may be suitable for the number of function in power management scope is less, say 4 functions for both runtime pm and system pm.

But for cdns3, it includes more functions at pm scope (will be more in future after supporting more features), it may needs to add __maybe_unused for all these functions if using your suggestion, so I prefer using MACRO.

Signature · 2 lines
Thanks,
Peter Chen
author
#5 lore raw

PATCH v6 3/3 usb: cdns3: imx: add glue layer runtime pm implementation

In reply to Peter Chen

Add imx glue layer runtime pm implementation, and the runtime pm is default off.

---
 drivers/usb/cdns3/cdns3-imx.c | 203 ++++++++++++++++++++++++++++++++--
 1 file changed, 192 insertions(+), 11 deletions(-)
drivers/usb/cdns3/cdns3-imx.c +192 -11
index aba988e71958..5d2a4e19fa83 100644
@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/iopoll.h>
+#include <linux/pm_runtime.h>
+#include "core.h"
 
 #define USB3_CORE_CTRL1    0x00
 #define USB3_CORE_CTRL2    0x04
@@ -32,7 +34,7 @@
 /* Register bits definition */
 
 /* USB3_CORE_CTRL1 */
-#define SW_RESET_MASK	(0x3f << 26)
+#define SW_RESET_MASK	GENMASK(31, 26)
 #define PWR_SW_RESET	BIT(31)
 #define APB_SW_RESET	BIT(30)
 #define AXI_SW_RESET	BIT(29)
@@ -44,17 +46,17 @@
 #define OC_DISABLE	BIT(9)
 #define MDCTRL_CLK_SEL	BIT(7)
 #define MODE_STRAP_MASK	(0x7)
-#define DEV_MODE	(1 << 2)
-#define HOST_MODE	(1 << 1)
-#define OTG_MODE	(1 << 0)
+#define DEV_MODE	BIT(2)
+#define HOST_MODE	BIT(1)
+#define OTG_MODE	BIT(0)
 
 /* USB3_INT_REG */
 #define CLK_125_REQ	BIT(29)
 #define LPM_CLK_REQ	BIT(28)
 #define DEVU3_WAEKUP_EN	BIT(14)
 #define OTG_WAKEUP_EN	BIT(12)
-#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
-#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
+#define DEV_INT_EN	GENMASK(9, 8) /* DEV INT b9:8 */
+#define HOST_INT1_EN	BIT(0) /* HOST INT b7:0 */
 
 /* USB3_CORE_STATUS */
 #define MDCTRL_CLK_STATUS	BIT(15)
@@ -62,15 +64,34 @@
 #define HOST_POWER_ON_READY	BIT(12)
 
 /* USB3_SSPHY_STATUS */
-#define CLK_VALID_MASK		(0x3f << 26)
-#define CLK_VALID_COMPARE_BITS	(0xf << 28)
-#define PHY_REFCLK_REQ		(1 << 0)
+#define CLK_VALID_MASK		GENMASK(31, 26)
+#define CLK_VALID_COMPARE_BITS	GENMASK(31, 28)
+#define PHY_REFCLK_REQ		BIT(0)
+
+/* OTG registers definition */
+#define OTGSTS		0x4
+/* OTGSTS */
+#define OTG_NRDY	BIT(11)
+
+/* xHCI registers definition  */
+#define XECP_PM_PMCSR		0x8018
+#define XECP_AUX_CTRL_REG1	0x8120
+
+/* Register bits definition */
+/* XECP_AUX_CTRL_REG1 */
+#define CFG_RXDET_P3_EN		BIT(15)
+
+/* XECP_PM_PMCSR */
+#define PS_MASK			GENMASK(1, 0)
+#define PS_D0			0
+#define PS_D1			1
 
 struct cdns_imx {
 	struct device *dev;
 	void __iomem *noncore;
 	struct clk_bulk_data *clks;
 	int num_clks;
+	struct platform_device *cdns3_pdev;
 };
 
 static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
@@ -126,6 +147,20 @@ static int cdns_imx_noncore_init(struct cdns_imx *data)
 	return ret;
 }
 
+static int cdns_imx_platform_suspend(struct device *dev,
+	bool suspend, bool wakeup);
+static struct cdns3_platform_data cdns_imx_pdata = {
+	.platform_suspend = cdns_imx_platform_suspend,
+};
+
+static struct of_dev_auxdata cdns_imx_auxdata[] = {
+	{
+	.compatible = "cdns,usb3",
+	.platform_data = &cdns_imx_pdata,
+	},
+	{},
+};
+
 static int cdns_imx_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -162,14 +197,18 @@ static int cdns_imx_probe(struct platform_device *pdev)
 	if (ret)
 		goto err;
 
-	ret = of_platform_populate(node, NULL, NULL, dev);
+	ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
 	if (ret) {
 		dev_err(dev, "failed to create children: %d\n", ret);
 		goto err;
 	}
 
-	return ret;
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
 
+	return ret;
 err:
 	clk_bulk_disable_unprepare(data->num_clks, data->clks);
 	return ret;
@@ -194,6 +233,147 @@ static int cdns_imx_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
+{
+	u32 value;
+
+	value = cdns_imx_readl(data, USB3_INT_REG);
+	if (enable)
+		value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
+	else
+		value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
+
+	cdns_imx_writel(data, USB3_INT_REG, value);
+}
+
+static int cdns_imx_platform_suspend(struct device *dev,
+		bool suspend, bool wakeup)
+{
+	struct cdns3 *cdns = dev_get_drvdata(dev);
+	struct device *parent = dev->parent;
+	struct cdns_imx *data = dev_get_drvdata(parent);
+	void __iomem *otg_regs = (void *)(cdns->otg_regs);
+	void __iomem *xhci_regs = cdns->xhci_regs;
+	u32 value;
+	int ret = 0;
+
+	if (cdns->role != USB_ROLE_HOST)
+		return 0;
+
+	if (suspend) {
+		/* SW request low power when all usb ports allow to it ??? */
+		value = readl(xhci_regs + XECP_PM_PMCSR);
+		value &= ~PS_MASK;
+		value |= PS_D1;
+		writel(value, xhci_regs + XECP_PM_PMCSR);
+
+		/* mdctrl_clk_sel */
+		value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+		value |= MDCTRL_CLK_SEL;
+		cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+		/* wait for mdctrl_clk_status */
+		value = cdns_imx_readl(data, USB3_CORE_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+			(value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait mdctrl_clk_status timeout\n");
+
+		/* wait lpm_clk_req to be 0 */
+		value = cdns_imx_readl(data, USB3_INT_REG);
+		ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+			(value & LPM_CLK_REQ) != LPM_CLK_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait lpm_clk_req timeout\n");
+
+		/* wait phy_refclk_req to be 0 */
+		value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+			(value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait phy_refclk_req timeout\n");
+
+		cdns3_set_wakeup(data, wakeup);
+	} else {
+		cdns3_set_wakeup(data, false);
+
+		/* SW request D0 */
+		value = readl(xhci_regs + XECP_PM_PMCSR);
+		value &= ~PS_MASK;
+		value |= PS_D0;
+		writel(value, xhci_regs + XECP_PM_PMCSR);
+
+		/* clr CFG_RXDET_P3_EN */
+		value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
+		value &= ~CFG_RXDET_P3_EN;
+		writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
+
+		/* clear mdctrl_clk_sel */
+		value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+		value &= ~MDCTRL_CLK_SEL;
+		cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+		/* wait CLK_125_REQ to be 1 */
+		value = cdns_imx_readl(data, USB3_INT_REG);
+		ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+			(value & CLK_125_REQ) == CLK_125_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait CLK_125_REQ timeout\n");
+
+		/* wait for mdctrl_clk_status is cleared */
+		value = cdns_imx_readl(data, USB3_CORE_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+			(value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
+
+		/* Wait until OTG_NRDY is 0 */
+		value = readl(otg_regs + OTGSTS);
+		ret = readl_poll_timeout(otg_regs + OTGSTS, value,
+			(value & OTG_NRDY) != OTG_NRDY,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait OTG ready timeout\n");
+	}
+
+	return ret;
+
+}
+
+static int cdns_imx_resume(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(data->num_clks, data->clks);
+}
+
+static int cdns_imx_suspend(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+
+	return 0;
+}
+#else
+static int cdns_imx_platform_suspend(struct device *dev,
+	bool suspend, bool wakeup)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops cdns_imx_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
+};
+
 static const struct of_device_id cdns_imx_of_match[] = {
 	{ .compatible = "fsl,imx8qm-usb3", },
 	{},
@@ -206,6 +386,7 @@ static struct platform_driver cdns_imx_driver = {
 	.driver		= {
 		.name	= "cdns3-imx",
 		.of_match_table	= cdns_imx_of_match,
+		.pm	= &cdns_imx_pm_ops,
 	},
 };
 module_platform_driver(cdns_imx_driver);
Signature · 1 line
2.17.1
#6 lore raw

Re: [PATCH v6 3/3] usb: cdns3: imx: add glue layer runtime pm implementation

I love your patch! Perhaps something to improve:

Hi Peter,

I love your patch! Perhaps something to improve:

[auto build test WARNING on usb/usb-testing]
[also build test WARNING on balbi-usb/testing/next shawnguo/for-next peter.chen-usb/ci-for-usb-next v5.9-rc2 next-20200824] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Peter-Chen/usb-cdns3-add-runtime-pm-support/20200821-105133
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
config: i386-randconfig-s002-20200824 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.2-191-g10164920-dirty
        # save the attached .config to linux build tree
        make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=i386 

If you fix the issue, kindly add following tag as appropriate

sparse warnings: (new ones prefixed by >>)

>> drivers/usb/cdns3/cdns3-imx.c:256:35: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected void [noderef] __iomem *otg_regs @@     got void * @@
>> drivers/usb/cdns3/cdns3-imx.c:256:35: sparse:     expected void [noderef] __iomem *otg_regs
>> drivers/usb/cdns3/cdns3-imx.c:256:35: sparse:     got void *

# https://github.com/0day-ci/linux/commit/7645672191d1842aa5744b38c0b8cc7df217dde3
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Peter-Chen/usb-cdns3-add-runtime-pm-support/20200821-105133 git checkout 7645672191d1842aa5744b38c0b8cc7df217dde3
vim +256 drivers/usb/cdns3/cdns3-imx.c

249
250 static int cdns_imx_platform_suspend(struct device *dev,
251 bool suspend, bool wakeup)
252 {
253 struct cdns3 *cdns = dev_get_drvdata(dev);
254 struct device *parent = dev->parent;
255 struct cdns_imx *data = dev_get_drvdata(parent);

 > 256		void __iomem *otg_regs = (void *)(cdns->otg_regs);

257 void __iomem *xhci_regs = cdns->xhci_regs;
258 u32 value;
259 int ret = 0;
260
261 if (cdns->role != USB_ROLE_HOST)
262 return 0;
263
264 if (suspend) {
265 /* SW request low power when all usb ports allow to it ??? */
266 value = readl(xhci_regs + XECP_PM_PMCSR);
267 value &= ~PS_MASK;
268 value |= PS_D1;
269 writel(value, xhci_regs + XECP_PM_PMCSR);
270
271 /* mdctrl_clk_sel */
272 value = cdns_imx_readl(data, USB3_CORE_CTRL1);
273 value |= MDCTRL_CLK_SEL;
274 cdns_imx_writel(data, USB3_CORE_CTRL1, value);
275
276 /* wait for mdctrl_clk_status */
277 value = cdns_imx_readl(data, USB3_CORE_STATUS);
278 ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
279 (value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
280 10, 100000);
281 if (ret)
282 dev_warn(parent, "wait mdctrl_clk_status timeout\n");
283
284 /* wait lpm_clk_req to be 0 */
285 value = cdns_imx_readl(data, USB3_INT_REG);
286 ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
287 (value & LPM_CLK_REQ) != LPM_CLK_REQ,
288 10, 100000);
289 if (ret)
290 dev_warn(parent, "wait lpm_clk_req timeout\n");
291
292 /* wait phy_refclk_req to be 0 */
293 value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
294 ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
295 (value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
296 10, 100000);
297 if (ret)
298 dev_warn(parent, "wait phy_refclk_req timeout\n");
299
300 cdns3_set_wakeup(data, wakeup);
301 } else {
302 cdns3_set_wakeup(data, false);
303
304 /* SW request D0 */
305 value = readl(xhci_regs + XECP_PM_PMCSR);
306 value &= ~PS_MASK;
307 value |= PS_D0;
308 writel(value, xhci_regs + XECP_PM_PMCSR);
309
310 /* clr CFG_RXDET_P3_EN */
311 value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
312 value &= ~CFG_RXDET_P3_EN;
313 writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
314
315 /* clear mdctrl_clk_sel */
316 value = cdns_imx_readl(data, USB3_CORE_CTRL1);
317 value &= ~MDCTRL_CLK_SEL;
318 cdns_imx_writel(data, USB3_CORE_CTRL1, value);
319
320 /* wait CLK_125_REQ to be 1 */
321 value = cdns_imx_readl(data, USB3_INT_REG);
322 ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
323 (value & CLK_125_REQ) == CLK_125_REQ,
324 10, 100000);
325 if (ret)
326 dev_warn(parent, "wait CLK_125_REQ timeout\n");
327
328 /* wait for mdctrl_clk_status is cleared */
329 value = cdns_imx_readl(data, USB3_CORE_STATUS);
330 ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
331 (value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
332 10, 100000);
333 if (ret)
334 dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
335
336 /* Wait until OTG_NRDY is 0 */
337 value = readl(otg_regs + OTGSTS);
338 ret = readl_poll_timeout(otg_regs + OTGSTS, value,
339 (value & OTG_NRDY) != OTG_NRDY,
340 10, 100000);
341 if (ret)
342 dev_warn(parent, "wait OTG ready timeout\n");
343 }
344
345 return ret;
346

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org