Skip to contentSkip to conversation

SCTP multi-homed association (::1)->(::1+127.0.0.1) attempting HEARTBEAT on 127.0.0.1->127.0.0.1

DISCUSSION Pau Espin Pedrol 3 participants 6 messages Aug 20, 2020 – Aug 24, 2020 SCTP protocol

lore
Share & tools
lore
#0 lore raw

Hi all,

I just submitted the following SCTP bug in the kernel bugtracker. I placed it under "IPV6" category since there's no "SCTP" category available there. It may be worth asking whoever is in charge to add the category so the relevant maintainer is assigned?

https://bugzilla.kernel.org/show_bug.cgi?id 8969

PS: I'm not registered to the ML, plese keep me in CC.

Signature · 6 lines
- Pau Espin Pedrol <[email protected]>         http://www.sysmocom.de/
===================================* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
#1 lore raw

Hi Pau,

Quoted 6 lines · Pau Espin Pedrol

Hi all,

I just submitted the following SCTP bug in the kernel bugtracker. I placed it under "IPV6" category since there's no "SCTP" category available there. It may be worth asking whoever is in charge to add the category so the relevant maintainer is assigned?

We actually don't use that bugzilla.

Quoted 4 lines

https://bugzilla.kernel.org/show_bug.cgi?id 8969

PS: I'm not registered to the ML, plese keep me in CC.

Aye. But gotta say, you might want to subscribe. It's really low volume, and will get you aware of recent fixes.

By your description in the bug, seems we fixed it in June. Can you confirm that your kernel doesn't have this commit in? 471e39df96b9 ("sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket")

Regards,
Marcelo

#2 lore raw
In reply to Pau Espin Pedrol

Hi Marcelo,

Between my initial message and your response I updated my kernel to Archlinux latest package version (5.8.3-arch1-1,
https://git.archlinux.org/linux.git/), which still shows the same bug I mentioned in my previous message.

The commit you described is already contained in the kernel (it was included upstream during v5.8-rc3).

Moreover, the description of the commit you shared doesn't seem to match the issue I described. The issue I explained is about the kernel trying to create further connections on an already ongoing association using a local IPv4 address it was never bound to; the issue has nothing to do with advertising of addresses (advertising is working correctly here IMHO).

Quick similar scenario setup would be something like:

SERVER:
server_fd = socket(AF_INET6, SCTP, STREAM);
sctp_bindx(server_fd, "127.0.0.1", "::1");
listen(server_fd); accept(server_fd);

CLIENT:
client_fd = socket(AF_INET6, SCTP, STREAM);
sctp_bindx(client_fd, "::1");
sctp_connectx(client_fd, "::1");

And then after client connects ::1<->::1 and gains info about server's 127.0.0.1 address, it tries to INIT 127.0.0.1->127.0.0.1 despite it was never bound to 127.0.0.1.

Regards,
Pau

Signature · 6 lines
- Pau Espin Pedrol <[email protected]>         http://www.sysmocom.de/
===================================* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
#3 lore raw
In reply to Pau Espin Pedrol

Hi Andreas,

My point is that the failure is in the client, which is creating an AF_INET6 socket and only binding on ::1, so it should never try to use "127.0.0.1" as local IP imho. Your comments may apply to the server, which is actually behaving fine.

Quoted 4 lines · Andreas Fink

The problem might be that your socket(AF_INET6,SCTP,STREAM) gives you an IPv6 only socket
but you are binding an IPv4 address to it with sctp_bindx. This will probably fail and thus you are binding to "any".

It doesn't fail, I'm checking the result of sctp_bindx() and /proc/net/sctp/eps I initially attached to the bug tracker shows it's binding fine as expected.

Quoted 6 lines

If you want IPv4+IPv6 in one socket, you need to specify a IPv4 address in  IPv6 compatibility format
So you should sctp_bindx to   "::ffff:127.0.0.1" not to  "127.0.0.1"  (well in any case you should pass a struck sockaddr_in6 and not a struct sockaddr_in)

Not really. I'm creating an addr buffer containing both struct sockaddr_in and struct sockaddr_in6 (see [1] if interested) after having looked at how libsctp and the kernel handle the sctp_bindx call, and it's working fine as backed by what /proc/net/sctp/eps shows.

[1]
https://git.osmocom.org/libosmocore/tree/src/socket.c?idí42a889004730beb26ce61ee462244b2bad6be9#n470

Signature · 6 lines
- Pau Espin Pedrol <[email protected]>         http://www.sysmocom.de/
===================================* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
#4 lore raw
In reply to Pau Espin Pedrol

Hi,

Quoted 3 lines · Andreas Fink

the server might tell it that it can also connect on 127.0.0.1 because of the advertized IPs maybe?

Yes sure, that's happening, the server is advertising the 127.0.0.1 over the conn established in ::1<->::1 because it is bound to that address too, but that's fine imho.

The problem is the client attempting to connect to server's 127.0.0.1 despite being not bound to any IPv4 address, and specifically to 127.0.0.1.

Signature · 6 lines
- Pau Espin Pedrol <[email protected]>         http://www.sysmocom.de/
===================================* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
#5 lore raw
In reply to Pau Espin Pedrol

Hi Pau and list,

Quoted 7 lines · Pau Espin Pedrol

Quick similar scenario setup would be something like:

SERVER:
server_fd = socket(AF_INET6, SCTP, STREAM);
sctp_bindx(server_fd, "127.0.0.1", "::1");
listen(server_fd); accept(server_fd);

Quoted 8 lines

CLIENT:
client_fd = socket(AF_INET6, SCTP, STREAM);
sctp_bindx(client_fd, "::1");
sctp_connectx(client_fd, "::1");

And then after client connects ::1<->::1 and gains info about server's 127.0.0.1 address, it tries to INIT 127.0.0.1->127.0.0.1 despite it was never bound to 127.0.0.1.

Thanks for reducing the example to the above. I think it should be pretty clear now. The client side kernel SCTP is misbehaving here.

One minor amendment: I don't think it's a question of whether or not the client side socket ever was bound to 127.0.0.1. The key issue here is that the client side socket was not bound to any IPv4 address at all.

Sidenote: What I also find puzzling is that both sockets in your example are created as AF_INET6 sockets, not as AF_UNSPEC. But let's stay focused on the actual problem here: A client-side socket being exclusively bound to IPv6 adresses attempting to send INIT chunks from an IPv4 address!

Signature · 4 lines
- Harald Welte <[email protected]>           http://laforge.gnumonks.org/
======================================
"Privacy in residential applications is a desirable marketing option."
                                                  (ETSI EN 300 175-7 Ch. A6)