ARM: dts: stm32: Fix DH PDK2 display PWM channel
PATCH 1/1 ARM: dts: stm32: Fix DH PDK2 display PWM channel
The display PWM channel is number 3 (PWM2 CH4), make it so.
--- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1 -1
@@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec { display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
Signature · 7 lines
2.28.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Marek
Quoted 3 lines · Marek Vasut
The display PWM channel is number 3 (PWM2 CH4), make it so.
Signed-off-by Marek Vasut <[email protected]>
No fixes tag ?
regards
alex
Quoted 16 lines
Cc: Alexandre Torgue <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]--- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +0
-0
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi clk_ext_audio_codec: clock-codec { · line 32
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1
-1@@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec { display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 1 line · Alexandre Torgue
Hi Marek
Hi,
Quoted 6 lines · Marek Vasut
Quoted 3 lines
The display PWM channel is number 3 (PWM2 CH4), make it so.
Signed-off-by Marek Vasut <[email protected]>No fixes tag ?
It should be
SoM and PDK2 board")
except backporting it across604536dc5837 ("ARM: dts: stm32: Split SoC-independent parts of DHCOM SOM and PDK2")
would generate a conflict.
If you are fine with that Fixes above, then please add it.
Thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Marek
Quoted 19 lines · Marek Vasut
The display PWM channel is number 3 (PWM2 CH4), make it so.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +0
-0
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi clk_ext_audio_codec: clock-codec { · line 32
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1
-1@@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec { display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
Applied on stm32-next.
Thanks.
Alex
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 1 line · Alexandre Torgue
Hi Marek
Hi,
Quoted 23 lines · Marek Vasut
Quoted 22 lines
The display PWM channel is number 3 (PWM2 CH4), make it so.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>To: [email protected]
---
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +0
-1@@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec { display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi clk_ext_audio_codec: clock-codec {
Quoted 5 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1
-0+ pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;Applied on stm32-next.
Don't you want to pick the one with the Fixes: tag ? :)
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 37 lines · Marek Vasut
Quoted 1 line · Alexandre Torgue
Hi Marek
Hi,
Quoted 23 lines · Marek Vasut
Quoted 22 lines
The display PWM channel is number 3 (PWM2 CH4), make it so.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +0
-1@@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec { display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi clk_ext_audio_codec: clock-codec {
Quoted 5 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1
-0+ pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;Applied on stm32-next.
Quoted 2 lines
Don't you want to pick the one with the Fixes: tag ? :)
Yes I did. I just responded on the bad one ;)
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 40 lines · Alexandre Torgue
Quoted 37 lines · Marek Vasut
Quoted 1 line · Alexandre Torgue
Hi Marek
Hi,
Quoted 31 lines · Marek Vasut
Quoted 19 lines
The display PWM channel is number 3 (PWM2 CH4), make it so.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>To: [email protected]
---
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +0
-0arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi clk_ext_audio_codec: clock-codec { · line 32
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1
-1@@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec { display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;Applied on stm32-next.
Quoted 4 lines
Quoted 2 lines
Don't you want to pick the one with the Fixes: tag ? :)
Yes I did. I just responded on the bad one ;)
Ah, right, OK :)
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel