Skip to contentSkip to conversation

dt-bindings: nvmem: Add syscon to Vybrid OCOTP driver

PATCH Applied Chris Healy 5 participants 5 messages Aug 25, 2020 – Aug 31, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 dt-bindings: nvmem: Add syscon to Vybrid OCOTP driver

From: Chris Healy <[email protected]>

Add syscon compatibility with Vybrid OCOTP driver binding. This is required to access the UID.

Fixes 623069946952 ("nvmem: Add DT binding documentation for Vybrid

OCOTP driver")

---
Changes in v4:
- Point to the appropriate commit for the Fixes: line
- Update the Required Properties to add the "syscon" compatible

---
 Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt +2 -2
index 56ed481c3e26..72ba628f6d0b 100644
@@ -2,7 +2,7 @@ On-Chip OTP Memory for Freescale Vybrid
 
 Required Properties:
   compatible:
-  - "fsl,vf610-ocotp" for VF5xx/VF6xx
+  - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
   #address-cells : Should be 1
   #size-cells : Should be 1
   reg : Address and length of OTP controller and fuse map registers
@@ -11,7 +11,7 @@ Required Properties:
 Example for Vybrid VF5xx/VF6xx:
 
 	ocotp: ocotp@400a5000 {
-		compatible = "fsl,vf610-ocotp";
+		compatible = "fsl,vf610-ocotp", "syscon";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x400a5000 0xCF0>;
Signature · 1 line
2.26.2
Reviewed-by on v4 1/1
#1 lore raw
Quoted 9 lines · Chris Healy

From: Chris Healy <[email protected]>

Add syscon compatibility with Vybrid OCOTP driver binding. This is required to access the UID.

Fixes 623069946952 ("nvmem: Add DT binding documentation for Vybrid

OCOTP driver")

Quoted 31 lines

---
Changes in v4:
- Point to the appropriate commit for the Fixes: line
- Update the Required Properties to add the "syscon" compatible

---
 Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt +2 -2
index 56ed481c3e26..72ba628f6d0b 100644
@@ -2,7 +2,7 @@ On-Chip OTP Memory for Freescale Vybrid
 
 Required Properties:
   compatible:
-  - "fsl,vf610-ocotp" for VF5xx/VF6xx
+  - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
   #address-cells : Should be 1
   #size-cells : Should be 1
   reg : Address and length of OTP controller and fuse map registers
@@ -11,7 +11,7 @@ Required Properties:
 Example for Vybrid VF5xx/VF6xx:
 
 	ocotp: ocotp@400a5000 {
-		compatible = "fsl,vf610-ocotp";
+		compatible = "fsl,vf610-ocotp", "syscon";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x400a5000 0xCF0>;
Reviewed-by on v4 1/1
#2 lore raw
In reply to Chris Healy

Hi Chris,

Quoted 8 lines · Chris Healy

From: Chris Healy <[email protected]>

Add syscon compatibility with Vybrid OCOTP driver binding. This is required to access the UID.

Fixes 623069946952 ("nvmem: Add DT binding documentation for Vybrid

OCOTP driver")

Fixes line should not be split even when greater than 80 columns.

Shawn can probably fix while applying it.

maintainer Acked-by on v4 1/1
#3 lore raw
In reply to Chris Healy
Quoted 9 lines · Chris Healy

From: Chris Healy <[email protected]>

Add syscon compatibility with Vybrid OCOTP driver binding. This is required to access the UID.

Fixes 623069946952 ("nvmem: Add DT binding documentation for Vybrid

OCOTP driver")

Quoted 8 lines

---
Changes in v4:
- Point to the appropriate commit for the Fixes: line
- Update the Required Properties to add the "syscon" compatible

---
 Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)