Add support for rk3399 based targets
v2 cover Add support for rk3399 based targets
This patch series adds support for targets from friendlyarm, pine64 and orangepi, based on rk3399 SOC.
Merged two patch series at https://patchwork.ozlabs.org/project/buildroot/list/?series=174279,
into this series.
patch #1, #2, are basically a resend. patch #3, #4 are new patches.
Changes for v2:
- Done few changes based on Thomas Pettazonni suggestions and
mailing list
- bumped linux version from 5.4.46 to 5.8.2
- bumped u-boot version from 2020.04 to 2020.07
- recent series is at:
https://patchwork.ozlabs.org/project/buildroot/cover/1592073154-13731-1-git-send-email-sunil at amarulasolutions.com/
Suniel Mahesh (4):
configs/rockpro64: new defconfig
configs/orangepi_rk3399: new defconfig
configs/nanopi_m4: new defconfig
configs/nanopc_t4: new defconfig
DEVELOPERS | 8 ++++ board/friendlyarm/nanopc-t4/extlinux.conf | 4 ++ board/friendlyarm/nanopc-t4/genimage.cfg | 39 ++++++++++++++++++ board/friendlyarm/nanopc-t4/post-build.sh | 5 +++ board/friendlyarm/nanopc-t4/readme.txt | 45 +++++++++++++++++++++ board/friendlyarm/nanopi-m4/extlinux.conf | 4 ++ board/friendlyarm/nanopi-m4/genimage.cfg | 39 ++++++++++++++++++ board/friendlyarm/nanopi-m4/post-build.sh | 5 +++ board/friendlyarm/nanopi-m4/readme.txt | 45 +++++++++++++++++++++ board/orangepi/orangepi-rk3399/extlinux.conf | 4 ++ board/orangepi/orangepi-rk3399/genimage.cfg | 39 ++++++++++++++++++ board/orangepi/orangepi-rk3399/post-build.sh | 5 +++ board/orangepi/orangepi-rk3399/readme.txt | 56 ++++++++++++++++++++++++++ board/pine64/rockpro64/extlinux.conf | 4 ++ board/pine64/rockpro64/genimage.cfg | 39 ++++++++++++++++++ board/pine64/rockpro64/post-build.sh | 5 +++ board/pine64/rockpro64/readme.txt | 60 ++++++++++++++++++++++++++++ configs/nanopc_t4_defconfig | 53 ++++++++++++++++++++++++ configs/nanopi_m4_defconfig | 53 ++++++++++++++++++++++++ configs/orangepi_rk3399_defconfig | 53 ++++++++++++++++++++++++ configs/rockpro64_defconfig | 53 ++++++++++++++++++++++++ 21 files changed, 618 insertions(+) create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh create mode 100644 board/friendlyarm/nanopc-t4/readme.txt create mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-m4/post-build.sh create mode 100644 board/friendlyarm/nanopi-m4/readme.txt create mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf create mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg create mode 100755 board/orangepi/orangepi-rk3399/post-build.sh create mode 100644 board/orangepi/orangepi-rk3399/readme.txt create mode 100644 board/pine64/rockpro64/extlinux.conf create mode 100644 board/pine64/rockpro64/genimage.cfg create mode 100755 board/pine64/rockpro64/post-build.sh create mode 100644 board/pine64/rockpro64/readme.txt create mode 100644 configs/nanopc_t4_defconfig create mode 100644 configs/nanopi_m4_defconfig create mode 100644 configs/orangepi_rk3399_defconfig create mode 100644 configs/rockpro64_defconfig
Signature · 1 line
2.7.4
PATCH v2 1/4 configs/rockpro64: new defconfig
A defconfig for the rockpro64 was added in 59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32 compiler was needed to build ATF, and this was not supported back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.
Following new changes are introduced in comparision with the older changeset:
- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
---
Changes for v2:
- Done few changes based on Thomas Pettazonni suggestions and mailing list
- bumped linux version from 5.4.46 to 5.8.2
- bumped u-boot version from 2020.04 to 2020.07
NOTE:
- This patch is a resend. Earlier patch is at:
https://patchwork.ozlabs.org/project/buildroot/list/?series=174279
- bumped linux version from 5.4.36 to 5.4.46
- Changes have been done based on comments by Thomas Pettazzoni on the mailing list.
--- DEVELOPERS | 2 ++ board/pine64/rockpro64/extlinux.conf | 4 +++ board/pine64/rockpro64/genimage.cfg | 39 +++++++++++++++++++++++ board/pine64/rockpro64/post-build.sh | 5 +++ board/pine64/rockpro64/readme.txt | 60 ++++++++++++++++++++++++++++++++++++ configs/rockpro64_defconfig | 53 +++++++++++++++++++++++++++++++ 6 files changed, 163 insertions(+) create mode 100644 board/pine64/rockpro64/extlinux.conf create mode 100644 board/pine64/rockpro64/genimage.cfg create mode 100755 board/pine64/rockpro64/post-build.sh create mode 100644 board/pine64/rockpro64/readme.txt create mode 100644 configs/rockpro64_defconfig
DEVELOPERS +2 -0
@@ -2438,6 +2438,7 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ +F: board/pine64/rockpro64 F: board/radxa/rockpi-4 F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10
@@ -2445,6 +2446,7 @@ F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig +F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/ N: Sven Haardiek <[email protected]>
board/pine64/rockpro64/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RK3399_ROCKPRO64 linux + kernel /Image + devicetree /rk3399-rockpro64.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait
board/pine64/rockpro64/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-rockpro64.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/pine64/rockpro64/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/pine64/rockpro64/readme.txt new file +60 -0
60 lines not on this page · raw message
configs/rockpro64_defconfig new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 1/4 configs/rockpro64: new defconfig
On 29/08/2020 11:35, Suniel Mahesh wrote:
[snip]
configs/rockpro64_defconfig line 21
Quoted 4 lines
configs/rockpro64_defconfig new file +4
-0+# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_LATEST_VERSION=y
Please always use a fixed version (i.e. CUSTOM_VERSION with 2020.07 as the
version number).
configs/rockpro64_defconfig line 24
Quoted 3 lines
configs/rockpro64_defconfig new file +3
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON=y
This is a blind option, after running a config it will be reset to no. It is
set by some of the other options that require python packages.
Just to be sure: you really do need python to build U-Boot in this config?
I've made those two fixes in all four patches and applied to master, thanks.
Regards,
Arnout
Quoted 7 lines
configs/rockpro64_defconfig new file +7
-0+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
PATCH v2 1/4 configs/rockpro64: new defconfig
Hi Arnout,
Quoted 5 lines · Arnout Vandecappelle
On 29/08/2020 11:35, Suniel Mahesh wrote:
[snip]
Quoted 7 lines
configs/rockpro64_defconfig line 21
Quoted 4 lines
configs/rockpro64_defconfig new file +4
-0+# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_LATEST_VERSION=yPlease always use a fixed version (i.e.
CUSTOM_VERSIONwith 2020.07 as the
version number).
Yes, I will follow the suggestion from next onwards..
Quoted 9 lines
configs/rockpro64_defconfig line 24
Quoted 4 lines
configs/rockpro64_defconfig new file +3
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON=yThis is a blind option, after running a config it will be reset to no. It is
set by some of the other options that require python packages.Just to be sure: you really do need python to build U-Boot in this config?
Yes it's a blind option, I have done a quick test to confirm. It is not needed. Thanks for the correction.
Quoted 3 lines
I've made those two fixes in all four patches and applied to master, thanks.
Appreciate your effort and thanks for applying the patches.
Regards
Suniel
Quoted 11 lines
Regards,
ArnoutQuoted 7 lines
configs/rockpro64_defconfig new file +7
-0+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
PATCH v2 2/4 configs/orangepi_rk3399: new defconfig
In reply to Suniel MaheshAdd initial support for Orangepi RK3399 target with below features:
- U-Boot 2020.07
- Linux 5.8.2
- Default packages from buildroot
---
Changes for v2:
- Done few changes based on Thomas Pettazonni suggestions and mailing list
- bumped linux version from 5.4.46 to 5.8.2
- bumped u-boot version from 2020.04 to 2020.07
NOTE:
- This patch is a resend. earlier patch is at:
https://patchwork.ozlabs.org/project/buildroot/list/?series=174279
- bumped linux version from 5.4.36 to 5.4.46
- As suggested by Thomas Pettazzoni, rk3399 targets does not need pylibfdt or pyelftools, but only a host Python interpreter. Remove them and add python, python3 in defconfig.
--- DEVELOPERS | 2 + board/orangepi/orangepi-rk3399/extlinux.conf | 4 ++ board/orangepi/orangepi-rk3399/genimage.cfg | 39 +++++++++++++++++++ board/orangepi/orangepi-rk3399/post-build.sh | 5 +++ board/orangepi/orangepi-rk3399/readme.txt | 56 ++++++++++++++++++++++++++++ configs/orangepi_rk3399_defconfig | 53 ++++++++++++++++++++++++++ 6 files changed, 159 insertions(+) create mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf create mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg create mode 100755 board/orangepi/orangepi-rk3399/post-build.sh create mode 100644 board/orangepi/orangepi-rk3399/readme.txt create mode 100644 configs/orangepi_rk3399_defconfig
DEVELOPERS +2 -0
@@ -2438,10 +2438,12 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ +F: board/orangepi/orangepi-rk3399 F: board/pine64/rockpro64 F: board/radxa/rockpi-4 F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 +F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig F: configs/rock_pi_n8_defconfig
board/orangepi/orangepi-rk3399/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RK3399_ROCKPRO64 linux + kernel /Image + devicetree /rk3399-orangepi.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
board/orangepi/orangepi-rk3399/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-orangepi.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/orangepi/orangepi-rk3399/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/orangepi/orangepi-rk3399/readme.txt new file +56 -0
56 lines not on this page · raw message
configs/orangepi_rk3399_defconfig new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 3/4 configs/nanopi_m4: new defconfig
In reply to Suniel MaheshA defconfig for the friendlyarm nanopi-m4 was added in 493c3979a4def978a1137cf8543bf0de50d2615e, but then removed in a24bd8936f57a590f810e14d7828cf1bddce580e because an ARM32 compiler was needed to build ATF, and this was not supported back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.
Following new changes are introduced in comparision with the older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
---
Changes for v2:
- Done few changes based on Thomas Pettazonni suggestions and mailing list
- bumped linux version from 5.4.46 to 5.8.2
- bumped u-boot version from 2020.04 to 2020.07
NOTE:
- new patch
--- DEVELOPERS | 2 ++ board/friendlyarm/nanopi-m4/extlinux.conf | 4 +++ board/friendlyarm/nanopi-m4/genimage.cfg | 39 +++++++++++++++++++++++ board/friendlyarm/nanopi-m4/post-build.sh | 5 +++ board/friendlyarm/nanopi-m4/readme.txt | 45 ++++++++++++++++++++++++++ configs/nanopi_m4_defconfig | 53 +++++++++++++++++++++++++++++++ 6 files changed, 148 insertions(+) create mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-m4/post-build.sh create mode 100644 board/friendlyarm/nanopi-m4/readme.txt create mode 100644 configs/nanopi_m4_defconfig
DEVELOPERS +2 -0
@@ -2438,11 +2438,13 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ +F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/pine64/rockpro64 F: board/radxa/rockpi-4 F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 +F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig
board/friendlyarm/nanopi-m4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RK3399_NANOPI_M4 linux + kernel /Image + devicetree /rk3399-nanopi-m4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
board/friendlyarm/nanopi-m4/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-nanopi-m4.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/friendlyarm/nanopi-m4/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopi-m4/readme.txt new file +45 -0
45 lines not on this page · raw message
configs/nanopi_m4_defconfig new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 4/4 configs/nanopc_t4: new defconfig
In reply to Suniel MaheshA defconfig for the friendlyarm nanopc-t4 was added in c23895f06e0988319a1959764a402b57bc21ffaf, but then removed in 8efd4463f78fd68c85b45cc0da347dfb805abb7e because an ARM32 compiler was needed to build ATF, and this was not supported back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.
Following new changes are introduced in comparision with the older changeset:
- updated readme
- GPT partition layout is being used
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
---
Changes for v2:
- Done few changes based on Thomas Pettazonni suggestions and mailing list
- bumped linux version from 5.4.46 to 5.8.2
- bumped u-boot version from 2020.04 to 2020.07
NOTE:
- new patch
--- DEVELOPERS | 2 ++ board/friendlyarm/nanopc-t4/extlinux.conf | 4 +++ board/friendlyarm/nanopc-t4/genimage.cfg | 39 +++++++++++++++++++++++ board/friendlyarm/nanopc-t4/post-build.sh | 5 +++ board/friendlyarm/nanopc-t4/readme.txt | 45 ++++++++++++++++++++++++++ configs/nanopc_t4_defconfig | 53 +++++++++++++++++++++++++++++++ 6 files changed, 148 insertions(+) create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh create mode 100644 board/friendlyarm/nanopc-t4/readme.txt create mode 100644 configs/nanopc_t4_defconfig
DEVELOPERS +2 -0
@@ -2438,12 +2438,14 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ +F: board/friendlyarm/nanopc-t4 F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/pine64/rockpro64 F: board/radxa/rockpi-4 F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 +F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig
board/friendlyarm/nanopc-t4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RK3399_NanoPC_T4 linux + kernel /Image + devicetree /rk3399-nanopc-t4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rootwait
board/friendlyarm/nanopc-t4/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-nanopc-t4.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/friendlyarm/nanopc-t4/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopc-t4/readme.txt new file +45 -0
45 lines not on this page · raw message
configs/nanopc_t4_defconfig new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.7.4