Skip to contentSkip to conversation

bpf: change bq_enqueue() return type from int to void

PATCH In review Björn Töpel 3 participants 3 messages Aug 31, 2020 – Sep 1, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 bpf: change bq_enqueue() return type from int to void

From: Björn Töpel <[email protected]>

The bq_enqueue() functions for {DEV, CPU}MAP always return zero. Changing the return type from int to void makes the code easier to follow.

---
 kernel/bpf/cpumap.c | 4 +---
 kernel/bpf/devmap.c | 9 ++++-----
 2 files changed, 5 insertions(+), 8 deletions(-)
kernel/bpf/cpumap.c +1 -3
index 8d2a8623d2a7..e486a84b1fce 100644
@@ -708,7 +708,7 @@ static int bq_flush_to_queue(struct xdp_bulk_queue *bq)
 /* Runs under RCU-read-side, plus in softirq under NAPI protection.
  * Thus, safe percpu variable access.
  */
-static int bq_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf)
+static void bq_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf)
 {
 	struct list_head *flush_list = this_cpu_ptr(&cpu_map_flush_list);
 	struct xdp_bulk_queue *bq = this_cpu_ptr(rcpu->bulkq);
@@ -729,8 +729,6 @@ static int bq_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf)
 
 	if (!bq->flush_node.prev)
 		list_add(&bq->flush_node, flush_list);
-
-	return 0;
 }
 
 int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
kernel/bpf/devmap.c +4 -5
index a42052b85c35..ce29ff7ba51f 100644
@@ -421,8 +421,8 @@ struct bpf_dtab_netdev *__dev_map_lookup_elem(struct bpf_map *map, u32 key)
 /* Runs under RCU-read-side, plus in softirq under NAPI protection.
  * Thus, safe percpu variable access.
  */
-static int bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
-		      struct net_device *dev_rx)
+static void bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
+		       struct net_device *dev_rx)
 {
 	struct list_head *flush_list = this_cpu_ptr(&dev_flush_list);
 	struct xdp_dev_bulk_queue *bq = this_cpu_ptr(dev->xdp_bulkq);
@@ -441,8 +441,6 @@ static int bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 
 	if (!bq->flush_node.prev)
 		list_add(&bq->flush_node, flush_list);
-
-	return 0;
 }
 
 static inline int __xdp_enqueue(struct net_device *dev, struct xdp_buff *xdp,
@@ -462,7 +460,8 @@ static inline int __xdp_enqueue(struct net_device *dev, struct xdp_buff *xdp,
 	if (unlikely(!xdpf))
 		return -EOVERFLOW;
 
-	return bq_enqueue(dev, xdpf, dev_rx);
+	bq_enqueue(dev, xdpf, dev_rx);
+	return 0;
 }
 
 static struct xdp_buff *dev_map_run_prog(struct net_device *dev,
Signature · 1 line
2.25.1
#1 lore raw
Quoted 6 lines · Björn Töpel

From: Björn Töpel <[email protected]>

The bq_enqueue() functions for {DEV, CPU}MAP always return zero. Changing the return type from int to void makes the code easier to follow.

You can expand that to a few other calls in this code path - both bq_flush_to_queue and bq_xmit_all always return 0 as well.

#2 lore raw
Quoted 11 lines · David Ahern
Quoted 6 lines · Björn Töpel

From: Björn Töpel <[email protected]>

The bq_enqueue() functions for {DEV, CPU}MAP always return zero. Changing the return type from int to void makes the code easier to follow.

You can expand that to a few other calls in this code path - both bq_flush_to_queue and bq_xmit_all always return 0 as well.

Indeed! I'll spin a new rev!