Skip to contentSkip to conversation

ARM: dts: stm32: Fix DH PDK2 display PWM channel

PATCH In review Marek Vasut 1 participant 2 messages Aug 31, 2020 – Sep 17, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: stm32: Fix DH PDK2 display PWM channel

The display PWM channel is number 3 (PWM2 CH4), make it so.

Fixes 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>

To: [email protected]

---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1 -1
index f8ac065d4597..5dff24e39af8 100644
@@ -25,7 +25,7 @@
 
 	display_bl: display-bl {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
 		default-brightness-level = <8>;
 		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
Signature · 7 lines
2.28.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw
Quoted 3 lines · Marek Vasut

The display PWM channel is number 3 (PWM2 CH4), make it so.

Fixes 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")

This one seems to be missing from upstream.

btw. is there any chance the stm32 linux upstreaming queue can be merged into linux-next automatically? It makes development much easier if one can rebase on next and see how the amount of patches in local tree is decreasing, and the patches get tested in next a bit more by various CI runners.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel