x86: SEV-ES Guest Support
Subsystems (10)
v6 cover x86: SEV-ES Guest Support
From: Joerg Roedel <[email protected]>
Hi,
here is the new version of the SEV-ES client enabling patch-set. It is based on the latest tip/master branch and contains the necessary changes. In particular those ar:
- Enabling CR4.FSGSBASE early on supported processors so that early #VC exceptions on APs can be handled.
- Add another patch (patch 1) to fix a KVM frame-size build warning on 32bit.
The previous versions can be found as a linked-list starting here:
https://lore.kernel.org/lkml/[email protected]/
There you also find more detailed information about SEV-ES in general and its implications.
Please review.
Thanks,
Joerg
Borislav Petkov (1):
KVM: SVM: Use __packed shorthand
Doug Covelli (1):
x86/vmware: Add VMware specific handling for VMMCALL under SEV-ES
Joerg Roedel (54):
KVM: SVM: nested: Don't allocate VMCB structures on stack
KVM: SVM: Add GHCB Accessor functions
x86/traps: Move pf error codes to <asm/trap_pf.h> x86/insn: Make inat-tables.c suitable for pre-decompression code x86/umip: Factor out instruction fetch
x86/umip: Factor out instruction decoding
x86/insn: Add insn_get_modrm_reg_off()
x86/insn: Add insn_has_rep_prefix() helper x86/boot/compressed/64: Disable red-zone usage x86/boot/compressed/64: Add IDT Infrastructure x86/boot/compressed/64: Rename kaslr_64.c to ident_map_64.c x86/boot/compressed/64: Add page-fault handler x86/boot/compressed/64: Always switch to own page-table x86/boot/compressed/64: Don't pre-map memory in KASLR code x86/boot/compressed/64: Change add_identity_map() to take start and
end
x86/boot/compressed/64: Add stage1 #VC handler x86/boot/compressed/64: Call set_sev_encryption_mask earlier x86/boot/compressed/64: Check return value of
kernel_ident_mapping_init()
x86/boot/compressed/64: Add set_page_en/decrypted() helpers x86/boot/compressed/64: Setup GHCB Based VC Exception handler x86/boot/compressed/64: Unmap GHCB page before booting the kernel x86/fpu: Move xgetbv()/xsetbv() into separate header x86/idt: Move IDT to data segment
x86/idt: Split idt_data setup out of set_intr_gate() x86/head/64: Install startup GDT
x86/head/64: Setup MSR_GS_BASE before calling into C code x86/head/64: Load GDT after switch to virtual addresses x86/head/64: Load segment registers earlier
x86/head/64: Switch to initial stack earlier
x86/head/64: Make fixup_pointer() static inline x86/head/64: Load IDT earlier
x86/head/64: Move early exception dispatch to C code x86/head/64: Set CR4.FSGSBASE early
x86/sev-es: Add SEV-ES Feature Detection
x86/sev-es: Print SEV-ES info into kernel log
x86/sev-es: Compile early handler code into kernel image x86/sev-es: Setup early #VC handler
x86/sev-es: Setup GHCB based boot #VC handler
x86/sev-es: Allocate and Map IST stack for #VC handler x86/sev-es: Adjust #VC IST Stack on entering NMI handler x86/dumpstack/64: Add noinstr version of get_stack_info() x86/entry/64: Add entry code for #VC handler
x86/sev-es: Wire up existing #VC exit-code handlers x86/sev-es: Handle instruction fetches from user-space x86/sev-es: Handle MMIO String Instructions
x86/sev-es: Handle #AC Events
x86/sev-es: Handle #DB Events
x86/paravirt: Allow hypervisor specific VMMCALL handling under SEV-ES x86/realmode: Add SEV-ES specific trampoline entry point x86/smpboot: Setup TSS for starting AP
x86/head/64: Don't call verify_cpu() on starting APs x86/head/64: Rename start_cpu0
x86/sev-es: Support CPU offline/online
x86/sev-es: Handle NMI State
Martin Radev (1):
x86/sev-es: Check required CPU features for SEV-ES
Tom Lendacky (19):
KVM: SVM: Add GHCB definitions x86/cpufeatures: Add SEV-ES CPU feature x86/sev-es: Add support for handling IOIO exceptions x86/sev-es: Add CPUID handling to #VC handler x86/sev-es: Setup per-cpu GHCBs for the runtime handler x86/sev-es: Add Runtime #VC Exception Handler x86/sev-es: Handle MMIO events
x86/sev-es: Handle MSR events
x86/sev-es: Handle DR7 read/write events x86/sev-es: Handle WBINVD Events
x86/sev-es: Handle RDTSC(P) Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle MONITOR/MONITORX Events x86/sev-es: Handle MWAIT/MWAITX Events x86/sev-es: Handle VMMCALL Events
x86/kvm: Add KVM specific VMMCALL handling under SEV-ES x86/realmode: Setup AP jump table
x86/efi: Add GHCB mappings when SEV-ES is active
arch/x86/Kconfig | 1 + arch/x86/boot/compressed/Makefile | 9 +- arch/x86/boot/compressed/cpuflags.c | 4 - arch/x86/boot/compressed/head_64.S | 32 +- arch/x86/boot/compressed/ident_map_64.c | 349 +++++ arch/x86/boot/compressed/idt_64.c | 54 + arch/x86/boot/compressed/idt_handlers_64.S | 77 ++ arch/x86/boot/compressed/kaslr.c | 36 +- arch/x86/boot/compressed/kaslr_64.c | 153 --- arch/x86/boot/compressed/misc.c | 7 + arch/x86/boot/compressed/misc.h | 50 +- arch/x86/boot/compressed/sev-es.c | 214 +++ arch/x86/entry/entry_64.S | 78 ++ arch/x86/include/asm/cpu.h | 2 +- arch/x86/include/asm/cpu_entry_area.h | 33 +- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/desc_defs.h | 3 + arch/x86/include/asm/fpu/internal.h | 30 +- arch/x86/include/asm/fpu/xcr.h | 34 + arch/x86/include/asm/idtentry.h | 50 + arch/x86/include/asm/insn-eval.h | 6 + arch/x86/include/asm/mem_encrypt.h | 5 + arch/x86/include/asm/msr-index.h | 3 + arch/x86/include/asm/page_64_types.h | 1 + arch/x86/include/asm/pgtable.h | 2 +- arch/x86/include/asm/processor.h | 7 + arch/x86/include/asm/proto.h | 1 + arch/x86/include/asm/realmode.h | 4 + arch/x86/include/asm/segment.h | 2 +- arch/x86/include/asm/setup.h | 20 +- arch/x86/include/asm/sev-es.h | 113 ++ arch/x86/include/asm/stacktrace.h | 2 + arch/x86/include/asm/svm.h | 100 +- arch/x86/include/asm/trap_pf.h | 24 + arch/x86/include/asm/trapnr.h | 1 + arch/x86/include/asm/traps.h | 20 +- arch/x86/include/asm/x86_init.h | 16 +- arch/x86/include/uapi/asm/svm.h | 11 + arch/x86/kernel/Makefile | 1 + arch/x86/kernel/cpu/amd.c | 3 +- arch/x86/kernel/cpu/common.c | 37 +- arch/x86/kernel/cpu/scattered.c | 1 + arch/x86/kernel/cpu/vmware.c | 50 +- arch/x86/kernel/dumpstack.c | 7 +- arch/x86/kernel/dumpstack_64.c | 47 +- arch/x86/kernel/head64.c | 85 +- arch/x86/kernel/head_32.S | 4 +- arch/x86/kernel/head_64.S | 159 ++- arch/x86/kernel/idt.c | 94 +- arch/x86/kernel/kvm.c | 35 +- arch/x86/kernel/nmi.c | 12 + arch/x86/kernel/sev-es-shared.c | 507 +++++++ arch/x86/kernel/sev-es.c | 1404 ++++++++++++++++++++ arch/x86/kernel/smpboot.c | 10 +- arch/x86/kernel/traps.c | 56 + arch/x86/kernel/umip.c | 49 +- arch/x86/kvm/svm/nested.c | 47 +- arch/x86/kvm/svm/svm.c | 2 + arch/x86/lib/insn-eval.c | 130 ++ arch/x86/mm/cpu_entry_area.c | 3 +- arch/x86/mm/extable.c | 1 + arch/x86/mm/mem_encrypt.c | 38 +- arch/x86/mm/mem_encrypt_identity.c | 3 + arch/x86/platform/efi/efi_64.c | 10 + arch/x86/realmode/init.c | 24 +- arch/x86/realmode/rm/header.S | 3 + arch/x86/realmode/rm/trampoline_64.S | 20 + arch/x86/tools/gen-insn-attr-x86.awk | 50 +- tools/arch/x86/tools/gen-insn-attr-x86.awk | 50 +- 69 files changed, 4041 insertions(+), 456 deletions(-) create mode 100644 arch/x86/boot/compressed/ident_map_64.c create mode 100644 arch/x86/boot/compressed/idt_64.c create mode 100644 arch/x86/boot/compressed/idt_handlers_64.S delete mode 100644 arch/x86/boot/compressed/kaslr_64.c create mode 100644 arch/x86/boot/compressed/sev-es.c create mode 100644 arch/x86/include/asm/fpu/xcr.h create mode 100644 arch/x86/include/asm/sev-es.h create mode 100644 arch/x86/include/asm/trap_pf.h create mode 100644 arch/x86/kernel/sev-es-shared.c create mode 100644 arch/x86/kernel/sev-es.c
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 1/76 KVM: SVM: nested: Don't allocate VMCB structures on stack
From: Joerg Roedel <[email protected]>
Do not allocate a vmcb_control_area and a vmcb_save_area on the stack, as these structures will become larger with future extenstions of SVM and thus the svm_set_nested_state() function will become a too large stack frame.
--- arch/x86/kvm/svm/nested.c | 47 +++++++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 14 deletions(-)
arch/x86/kvm/svm/nested.c +33 -14
@@ -1060,10 +1060,14 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu,struct vmcb *hsave = svm->nested.hsave;struct vmcb __user *user_vmcb = (struct vmcb __user *) &user_kvm_nested_state->data.svm[0 ]; -struct vmcb_control_area ctl; -struct vmcb_save_area save; +struct vmcb_control_area *ctl; +struct vmcb_save_area *save; +int ret;u32 cr0; +BUILD_BUG_ON (sizeof (struct vmcb_control_area ) +sizeof (struct vmcb_save_area ) > +KVM_STATE_NESTED_SVM_VMCB_SIZE ); +if (kvm_state->format !=KVM_STATE_NESTED_FORMAT_SVM )return -EINVAL ;
@@ -1095,13 +1099,22 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu,return -EINVAL ;if (kvm_state->size <sizeof (*kvm_state) +KVM_STATE_NESTED_SVM_VMCB_SIZE )return -EINVAL ; -if (copy_from_user (&ctl, &user_vmcb->control,sizeof (ctl))) -return -EFAULT ; -if (copy_from_user (&save, &user_vmcb->save,sizeof (save))) -return -EFAULT ; -if (!nested_vmcb_check_controls (&ctl)) -return -EINVAL ; + ret = -ENOMEM ; + ctl =kzalloc (sizeof (*ctl),GFP_KERNEL ); + save =kzalloc (sizeof (*save),GFP_KERNEL ); +if (!ctl || !save) + goto out_free; + + ret = -EFAULT ; +if (copy_from_user (ctl, &user_vmcb->control,sizeof (*ctl))) + goto out_free; +if (copy_from_user (save, &user_vmcb->save,sizeof (*save))) + goto out_free; + + ret = -EINVAL ; +if (!nested_vmcb_check_controls (ctl)) + goto out_free;/* * Processor state contains L2 state. Check that it is
@@ -1109,15 +1122,15 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu,*/ cr0 =kvm_read_cr0 (vcpu);if (((cr0 &X86_CR0_CD ) ==0 ) && (cr0 &X86_CR0_NW )) -return -EINVAL ; + goto out_free;/* * Validate host state saved from before VMRUN (see * nested_svm_check_permissions). * TODO: validate reserved bits for all saved state. */ -if (!(save.cr0 &X86_CR0_PG )) -return -EINVAL ; +if (!(save->cr0 &X86_CR0_PG )) + goto out_free;/* * All checks done, we can enter guest mode. L1 control fields
@@ -1126,15 +1139,21 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu,* contains saved L1 state. */ copy_vmcb_control_area (&hsave->control, &svm->vmcb->control); - hsave->save = save; + hsave->save = *save; svm->nested.vmcb = kvm_state->hdr.svm.vmcb_pa; -load_nested_vmcb_control (svm, &ctl); +load_nested_vmcb_control (svm, ctl);nested_prepare_vmcb_control (svm); out_set_gif:svm_set_gif (svm, !!(kvm_state->flags &KVM_STATE_NESTED_GIF_SET )); -return 0 ; + + ret =0 ; +out_free: +kfree (save); +kfree (ctl); + +return ret; }struct kvm_x86_nested_ops svm_nested_ops = {
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 2/76 KVM: SVM: Add GHCB definitions
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Extend the vmcb_safe_area with SEV-ES fields and add a new 'struct ghcb' which will be used for guest-hypervisor communication.
--- arch/x86/include/asm/svm.h | 45 +++++++++++++++++++++++++++++++++++++- arch/x86/kvm/svm/svm.c | 2 ++ 2 files changed, 46 insertions(+), 1 deletion(-)
arch/x86/include/asm/svm.h +44 -1
@@ -200,13 +200,56 @@ struct __attribute__ ((__packed__)) vmcb_save_area {u64 br_to;u64 last_excp_from;u64 last_excp_to; + +/* +* The following part of the save area is valid only for +* SEV-ES guests when referenced through the GHCB. +*/ +u8 reserved_7[104 ]; +u64 reserved_8;/* rax already available at 0x01f8 */ +u64 rcx; +u64 rdx; +u64 rbx; +u64 reserved_9;/* rsp already available at 0x01d8 */ +u64 rbp; +u64 rsi; +u64 rdi; +u64 r8; +u64 r9; +u64 r10; +u64 r11; +u64 r12; +u64 r13; +u64 r14; +u64 r15; +u8 reserved_10[16 ]; +u64 sw_exit_code; +u64 sw_exit_info_1; +u64 sw_exit_info_2; +u64 sw_scratch; +u8 reserved_11[56 ]; +u64 xcr0; +u8 valid_bitmap[16 ]; +u64 x87_state_gpa; }; +struct ghcb { +struct vmcb_save_area save; +u8 reserved_save[2048 -sizeof (struct vmcb_save_area )]; + +u8 shared_buffer[2032 ]; + +u8 reserved_1[10 ]; +u16 protocol_version;/* negotiated SEV-ES/GHCB protocol version */ +u32 ghcb_usage; +} __packed; +static inline void __unused_size_checks (void ) { -BUILD_BUG_ON (sizeof (struct vmcb_save_area ) !=0x298 ); +BUILD_BUG_ON (sizeof (struct vmcb_save_area ) !=1032 );BUILD_BUG_ON (sizeof (struct vmcb_control_area ) !=256 ); +BUILD_BUG_ON (sizeof (struct ghcb ) !=4096 ); }struct __attribute__ ((__packed__ ))vmcb {
arch/x86/kvm/svm/svm.c +2 -0
@@ -4164,6 +4164,8 @@ static struct kvm_x86_init_ops svm_init_ops __initdata = {static int __init svm_init (void ) { +__unused_size_checks (); +return kvm_init (&svm_init_ops,sizeof (struct vcpu_svm ), __alignof__(struct vcpu_svm ),THIS_MODULE ); }
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 02/76] KVM: SVM: Add GHCB definitions
arch/x86/include/asm/svm.h struct __attribute__ ((__packed__)) vmcb_save_area { · line 252
Quoted 6 lines · Joerg Roedel
static inline void
__unused_size_checks(void)
{arch/x86/include/asm/svm.h +2
-1-BUILD_BUG_ON (sizeof (struct vmcb_save_area ) !=0x298 ); +BUILD_BUG_ON (sizeof (struct vmcb_save_area ) !=1032 );BUILD_BUG_ON (sizeof (struct vmcb_control_area ) !=256 ); +BUILD_BUG_ON (sizeof (struct ghcb ) !=4096 );
Could those naked numbers be proper, meaningfully named defines?
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationRe: [PATCH v6 02/76] KVM: SVM: Add GHCB definitions
Quoted 9 lines · Borislav Petkov
arch/x86/include/asm/svm.h struct __attribute__ ((__packed__)) vmcb_save_area { · line 252
Quoted 6 lines · Joerg Roedel
static inline void
__unused_size_checks(void)
{arch/x86/include/asm/svm.h +2
-1-BUILD_BUG_ON (sizeof (struct vmcb_save_area ) !=0x298 ); +BUILD_BUG_ON (sizeof (struct vmcb_save_area ) !=1032 );BUILD_BUG_ON (sizeof (struct vmcb_control_area ) !=256 ); +BUILD_BUG_ON (sizeof (struct ghcb ) !=4096 );Could those naked numbers be proper, meaningfully named defines?
I don't think so, if I look at the history of these checks their whole purpose seems to be to alert the developer/maintainer when their size changes and that they might not fit on the stack anymore. But that is taken care of in patch 1.
Regards,
Joerg
Borislav Petkov
maintainerRe: [PATCH v6 02/76] KVM: SVM: Add GHCB definitions
Quoted 4 lines · Joerg Roedel
I don't think so, if I look at the history of these checks their whole purpose seems to be to alert the developer/maintainer when their size changes and that they might not fit on the stack anymore. But that is taken care of in patch 1.
Why? What's wrong with:
BUILD_BUG_ON(sizeof(struct vmcb_save_area) != VMCB_SAVE_AREA_SIZE); BUILD_BUG_ON(sizeof(struct vmcb_control_area) != VMCB_CONTROL_AREA_SIZE); BUILD_BUG_ON(sizeof(struct ghcb) != PAGE_SIZE);
?
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH v6 02/76] KVM: SVM: Add GHCB definitions
Quoted 6 lines · Borislav Petkov
Quoted 4 lines · Joerg Roedel
I don't think so, if I look at the history of these checks their whole purpose seems to be to alert the developer/maintainer when their size changes and that they might not fit on the stack anymore. But that is taken care of in patch 1.
Quoted 13 lines
Why? What's wrong with:
BUILD_BUG_ON(sizeof(struct vmcb_save_area) != VMCB_SAVE_AREA_SIZE); BUILD_BUG_ON(sizeof(struct vmcb_control_area) != VMCB_CONTROL_AREA_SIZE); BUILD_BUG_ON(sizeof(struct ghcb) != PAGE_SIZE);?
Signature · 4 lines
Regards/Gruss, Boris. https://people.kernel.org/tglx/notes-about-netiquette
Wouldn't we rather just remove the checks?
Re: [PATCH v6 02/76] KVM: SVM: Add GHCB definitions
Quoted 1 line · Arvind Sankar
Wouldn't we rather just remove the checks?
I think that's a different topic to be discussed with the KVM maintainers. For now I will add defines for the magic numbers.
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 3/76 KVM: SVM: Add GHCB Accessor functions
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Building a correct GHCB for the hypervisor requires setting valid bits in the GHCB. Simplify that process by providing accessor functions to set values and to update the valid bitmap and to check the valid bitmap in KVM.
--- arch/x86/include/asm/svm.h | 43 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
arch/x86/include/asm/svm.h +43 -0
@@ -341,4 +341,47 @@ struct __attribute__ ((__packed__)) vmcb {#define SVM_CR0_SELECTIVE_MASK (X86_CR0_TS | X86_CR0_MP) +/* GHCB Accessor functions */ + +#define GHCB_BITMAP_IDX (field) \ + (offsetof(struct vmcb_save_area, field) / sizeof(u64)) + +#define DEFINE_GHCB_ACCESSORS (field) \ + static inline bool ghcb_##field##_is_valid(const struct ghcb *ghcb) \ + { \ + return test_bit(GHCB_BITMAP_IDX(field), \ + (unsigned long *)&ghcb->save.valid_bitmap); \ + } \ + \ + static inline void ghcb_set_##field(struct ghcb *ghcb, u64 value) \ + { \ + __set_bit(GHCB_BITMAP_IDX(field), \ + (unsigned long *)&ghcb->save.valid_bitmap); \ + ghcb->save.field = value; \ + } + +DEFINE_GHCB_ACCESSORS(cpl) +DEFINE_GHCB_ACCESSORS(rip) +DEFINE_GHCB_ACCESSORS(rsp) +DEFINE_GHCB_ACCESSORS(rax) +DEFINE_GHCB_ACCESSORS(rcx) +DEFINE_GHCB_ACCESSORS(rdx) +DEFINE_GHCB_ACCESSORS(rbx) +DEFINE_GHCB_ACCESSORS(rbp) +DEFINE_GHCB_ACCESSORS(rsi) +DEFINE_GHCB_ACCESSORS(rdi) +DEFINE_GHCB_ACCESSORS(r8) +DEFINE_GHCB_ACCESSORS(r9) +DEFINE_GHCB_ACCESSORS(r10) +DEFINE_GHCB_ACCESSORS(r11) +DEFINE_GHCB_ACCESSORS(r12) +DEFINE_GHCB_ACCESSORS(r13) +DEFINE_GHCB_ACCESSORS(r14) +DEFINE_GHCB_ACCESSORS(r15) +DEFINE_GHCB_ACCESSORS(sw_exit_code) +DEFINE_GHCB_ACCESSORS(sw_exit_info_1) +DEFINE_GHCB_ACCESSORS(sw_exit_info_2) +DEFINE_GHCB_ACCESSORS(sw_scratch) +DEFINE_GHCB_ACCESSORS(xcr0) +#endif
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 4/76 KVM: SVM: Use __packed shorthand
In reply to Joerg RoedelFrom: Borislav Petkov <[email protected]>
Use the shorthand to make it more readable.
No functional changes.
--- arch/x86/include/asm/svm.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/x86/include/asm/svm.h +6 -6
@@ -150,14 +150,14 @@ struct __attribute__ ((__packed__)) vmcb_control_area {#define SVM_NESTED_CTL_NP_ENABLE BIT(0)#define SVM_NESTED_CTL_SEV_ENABLE BIT(1) -struct __attribute__ ((__packed__ ))vmcb_seg { +struct vmcb_seg {u16 selector;u16 attrib;u32 limit;u64 base; -}; +} __packed; -struct __attribute__ ((__packed__ ))vmcb_save_area { +struct vmcb_save_area {struct vmcb_seg es;struct vmcb_seg cs;struct vmcb_seg ss;
@@ -231,7 +231,7 @@ struct __attribute__ ((__packed__)) vmcb_save_area {u64 xcr0;u8 valid_bitmap[16 ];u64 x87_state_gpa; -}; +} __packed;struct ghcb {struct vmcb_save_area save;
@@ -252,11 +252,11 @@ static inline void __unused_size_checks(void)BUILD_BUG_ON (sizeof (struct ghcb ) !=4096 ); } -struct __attribute__ ((__packed__ ))vmcb { +struct vmcb {struct vmcb_control_area control;u8 reserved_control[1024 -sizeof (struct vmcb_control_area )];struct vmcb_save_area save; -}; +} __packed;#define SVM_CPUID_FUNC 0x8000000a
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 5/76 x86/cpufeatures: Add SEV-ES CPU feature
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Add CPU feature detection for Secure Encrypted Virtualization with Encrypted State. This feature enhances SEV by also encrypting the guest register state, making it in-accessible to the hypervisor.
--- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/kernel/cpu/amd.c | 3 ++- arch/x86/kernel/cpu/scattered.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-)
arch/x86/include/asm/cpufeatures.h +1 -0
@@ -236,6 +236,7 @@#define X86_FEATURE_EPT_AD ( 8*32+17)/* Intel Extended Page Table access-dirty bit */ #define X86_FEATURE_VMCALL ( 8*32+18)/* "" Hypervisor supports the VMCALL instruction */ #define X86_FEATURE_VMW_VMMCALL ( 8*32+19)/* "" VMware prefers VMMCALL hypercall instruction */ +#define X86_FEATURE_SEV_ES ( 8*32+20)/* AMD Secure Encrypted Virtualization - Encrypted State */ /* Intel-defined CPU features, CPUID level 0x00000007:0 (EBX), word 9 */ #define X86_FEATURE_FSGSBASE ( 9*32+ 0)/* RDFSBASE, WRFSBASE, RDGSBASE, WRGSBASE instructions*/
arch/x86/kernel/cpu/amd.c +2 -1
@@ -614,7 +614,7 @@ static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)* If BIOS has not enabled SME then don't advertise the * SME feature (set in scattered.c). * For SEV: If BIOS has not enabled SEV then don't advertise the -* SEV feature (set in scattered.c). +* SEV and SEV_ES feature (set in scattered.c). * * In all cases, since support for SME and SEV requires long mode, * don't advertise the feature under CONFIG_X86_32.
@@ -645,6 +645,7 @@ static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)setup_clear_cpu_cap (X86_FEATURE_SME ); clear_sev:setup_clear_cpu_cap (X86_FEATURE_SEV ); +setup_clear_cpu_cap (X86_FEATURE_SEV_ES ); } }
arch/x86/kernel/cpu/scattered.c +1 -0
@@ -41,6 +41,7 @@ static const struct cpuid_bit cpuid_bits[] = { { X86_FEATURE_MBA, CPUID_EBX, 6, 0x80000008, 0 }, { X86_FEATURE_SME, CPUID_EAX, 0, 0x8000001f, 0 }, { X86_FEATURE_SEV, CPUID_EAX, 1, 0x8000001f, 0 }, + { X86_FEATURE_SEV_ES, CPUID_EAX, 3, 0x8000001f, 0 }, { 0, 0, 0, 0, 0 } };
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 6/76 x86/traps: Move pf error codes to <asm/trap_pf.h>
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Move the definition of the x86 page-fault error code bits to the new header file asm/trap_pf.h. This makes it easier to include them into pre-decompression boot code. No functional changes.
--- arch/x86/include/asm/trap_pf.h | 24 ++++++++++++++++++++++++ arch/x86/include/asm/traps.h | 19 +------------------ 2 files changed, 25 insertions(+), 18 deletions(-) create mode 100644 arch/x86/include/asm/trap_pf.h
arch/x86/include/asm/trap_pf.h new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_TRAP_PF_H +#define _ASM_X86_TRAP_PF_H + +/* +* Page fault error code bits: +* +* bit 0 == 0: no page found 1: protection fault +* bit 1 == 0: read access 1: write access +* bit 2 == 0: kernel-mode access 1: user-mode access +* bit 3 == 1: use of reserved bit detected +* bit 4 == 1: fault was an instruction fetch +* bit 5 == 1: protection keys block access +*/ +enum x86_pf_error_code { +X86_PF_PROT =1 <<0 , +X86_PF_WRITE =1 <<1 , +X86_PF_USER =1 <<2 , +X86_PF_RSVD =1 <<3 , +X86_PF_INSTR =1 <<4 , +X86_PF_PK =1 <<5 , +}; + +#endif /* _ASM_X86_TRAP_PF_H */
arch/x86/include/asm/traps.h +1 -18
@@ -8,6 +8,7 @@#include <asm/debugreg.h> #include <asm/idtentry.h> #include <asm/siginfo.h> /* TRAP_TRACE, ... */ +#include <asm/trap_pf.h> #ifdef CONFIG_X86_64 asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs);
@@ -41,22 +42,4 @@ void __noreturn handle_stack_overflow(const char *message, unsigned long fault_address);#endif -/* -* Page fault error code bits: -* -* bit 0 == 0: no page found 1: protection fault -* bit 1 == 0: read access 1: write access -* bit 2 == 0: kernel-mode access 1: user-mode access -* bit 3 == 1: use of reserved bit detected -* bit 4 == 1: fault was an instruction fetch -* bit 5 == 1: protection keys block access -*/ -enum x86_pf_error_code { -X86_PF_PROT =1 <<0 , -X86_PF_WRITE =1 <<1 , -X86_PF_USER =1 <<2 , -X86_PF_RSVD =1 <<3 , -X86_PF_INSTR =1 <<4 , -X86_PF_PK =1 <<5 , -};#endif /* _ASM_X86_TRAPS_H */
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 7/76 x86/insn: Make inat-tables.c suitable for pre-decompression code
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The inat-tables.c file has some arrays in it that contain pointers to other arrays. These pointers need to be relocated when the kernel image is moved to a different location.
The pre-decompression boot-code has no support for applying ELF relocations, so initialize these arrays at runtime in the pre-decompression code to make sure all pointers are correctly initialized.
--- arch/x86/tools/gen-insn-attr-x86.awk | 50 +++++++++++++++++++++- tools/arch/x86/tools/gen-insn-attr-x86.awk | 50 +++++++++++++++++++++- 2 files changed, 98 insertions(+), 2 deletions(-)
arch/x86/tools/gen-insn-attr-x86.awk +49 -1
@@ -362,6 +362,9 @@ function convert_operands(count,opnd, i,j,imm,mod) END { if (awkchecked != "") exit 1 + + print "#ifndef __BOOT_COMPRESSED\n" + # print escape opcode map's array print "/* Escape opcode map array */" print "const insn_attr_t * const inat_escape_tables[INAT_ESC_MAX + 1]" \
@@ -388,6 +391,51 @@ END { for (j = 0; j < max_lprefix; j++) if (atable[i,j]) print " ["i"]["j"] = "atable[i,j]"," - print "};" + print "};\n" + + print "#else /* !__BOOT_COMPRESSED */\n" + + print "/* Escape opcode map array */" + print "static const insn_attr_t *inat_escape_tables[INAT_ESC_MAX + 1]" \ + "[INAT_LSTPFX_MAX + 1];" + print "" + + print "/* Group opcode map array */" + print "static const insn_attr_t *inat_group_tables[INAT_GRP_MAX + 1]"\ + "[INAT_LSTPFX_MAX + 1];" + print "" + + print "/* AVX opcode map array */" + print "static const insn_attr_t *inat_avx_tables[X86_VEX_M_MAX + 1]"\ + "[INAT_LSTPFX_MAX + 1];" + print "" + + print "static void inat_init_tables(void)" + print "{" + + # print escape opcode map's array + print "\t/* Print Escape opcode map array */" + for (i = 0; i < geid; i++) + for (j = 0; j < max_lprefix; j++) + if (etable[i,j]) + print "\tinat_escape_tables["i"]["j"] = "etable[i,j]";" + print "" + + # print group opcode map's array + print "\t/* Print Group opcode map array */" + for (i = 0; i < ggid; i++) + for (j = 0; j < max_lprefix; j++) + if (gtable[i,j]) + print "\tinat_group_tables["i"]["j"] = "gtable[i,j]";" + print "" + # print AVX opcode map's array + print "\t/* Print AVX opcode map array */" + for (i = 0; i < gaid; i++) + for (j = 0; j < max_lprefix; j++) + if (atable[i,j]) + print "\tinat_avx_tables["i"]["j"] = "atable[i,j]";" + + print "}" + print "#endif" }
tools/arch/x86/tools/gen-insn-attr-x86.awk +49 -1
61 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 8/76 x86/umip: Factor out instruction fetch
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Factor out the code to fetch the instruction from user-space to a helper function.
No functional changes.
--- arch/x86/include/asm/insn-eval.h | 2 ++ arch/x86/kernel/umip.c | 26 +++++----------------- arch/x86/lib/insn-eval.c | 38 ++++++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+), 20 deletions(-)
arch/x86/include/asm/insn-eval.h +2 -0
@@ -19,5 +19,7 @@ void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs);int insn_get_modrm_rm_off (struct insn *insn,struct pt_regs *regs);unsigned long insn_get_seg_base (struct pt_regs *regs,int seg_reg_idx);int insn_get_code_seg_params (struct pt_regs *regs); +int insn_fetch_from_user (struct pt_regs *regs, +unsigned char buf[MAX_INSN_SIZE ]);#endif /* _ASM_X86_INSN_EVAL_H */
arch/x86/kernel/umip.c +6 -20
@@ -335,11 +335,11 @@ static void force_sig_info_umip_fault(void __user *addr, struct pt_regs *regs)*/ bool fixup_umip_exception (struct pt_regs *regs) { -int not_copied, nr_copied, reg_offset, dummy_data_size, umip_inst; -unsigned long seg_base =0 , *reg_addr; +int nr_copied, reg_offset, dummy_data_size, umip_inst;/* 10 bytes is the maximum size of the result of UMIP instructions */ unsigned char dummy_data[10 ] = {0 };unsigned char buf[MAX_INSN_SIZE ]; +unsigned long *reg_addr;void __user *uaddr;struct insn insn;int seg_defs;
@@ -347,26 +347,12 @@ bool fixup_umip_exception(struct pt_regs *regs)if (!regs)return false; -/* -* If not in user-space long mode, a custom code segment could be in -* use. This is true in protected mode (if the process defined a local -* descriptor table), or virtual-8086 mode. In most of the cases -* seg_base will be zero as in USER_CS. -*/ -if (!user_64bit_mode (regs)) - seg_base =insn_get_seg_base (regs,INAT_SEG_REG_CS ); - -if (seg_base ==-1L ) -return false; - - not_copied =copy_from_user (buf, (void __user *)(seg_base + regs->ip), -sizeof (buf)); - nr_copied =sizeof (buf) - not_copied; + nr_copied =insn_fetch_from_user (regs, buf);/* -* The copy_from_user above could have failed if user code is protected -* by a memory protection key. Give up on emulation in such a case. -* Should we issue a page fault? +* The insn_fetch_from_user above could have failed if user code +* is protected by a memory protection key. Give up on emulation +* in such a case. Should we issue a page fault? */ if (!nr_copied)return false;
arch/x86/lib/insn-eval.c +38 -0
@@ -1369,3 +1369,41 @@ void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs)return (void __user *)-1L ; } } + +/** +* insn_fetch_from_user() - Copy instruction bytes from user-space memory +* @regs: Structure with register values as seen when entering kernel mode +* @buf: Array to store the fetched instruction +* +* Gets the linear address of the instruction and copies the instruction bytes +* to the buf. +* +* Returns: +* +* Number of instruction bytes copied. +* +* 0 if nothing was copied. +*/ +int insn_fetch_from_user (struct pt_regs *regs,unsigned char buf[MAX_INSN_SIZE ]) +{ +unsigned long seg_base =0 ; +int not_copied; + +/* +* If not in user-space long mode, a custom code segment could be in +* use. This is true in protected mode (if the process defined a local +* descriptor table), or virtual-8086 mode. In most of the cases +* seg_base will be zero as in USER_CS. +*/ +if (!user_64bit_mode (regs)) { + seg_base =insn_get_seg_base (regs,INAT_SEG_REG_CS ); +if (seg_base ==-1L ) +return 0 ; + } + + + not_copied =copy_from_user (buf, (void __user *)(seg_base + regs->ip), +MAX_INSN_SIZE ); + +return MAX_INSN_SIZE - not_copied; +}
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 9/76 x86/umip: Factor out instruction decoding
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Factor out the code used to decode an instruction with the correct address and operand sizes to a helper function.
No functional changes.
--- arch/x86/include/asm/insn-eval.h | 2 ++ arch/x86/kernel/umip.c | 23 +--------------- arch/x86/lib/insn-eval.c | 45 ++++++++++++++++++++++++++++++++ 3 files changed, 48 insertions(+), 22 deletions(-)
arch/x86/include/asm/insn-eval.h +2 -0
@@ -21,5 +21,7 @@ unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx);int insn_get_code_seg_params (struct pt_regs *regs);int insn_fetch_from_user (struct pt_regs *regs,unsigned char buf[MAX_INSN_SIZE ]); +bool insn_decode (struct insn *insn,struct pt_regs *regs, +unsigned char buf[MAX_INSN_SIZE ],int buf_size);#endif /* _ASM_X86_INSN_EVAL_H */
arch/x86/kernel/umip.c +1 -22
@@ -342,7 +342,6 @@ bool fixup_umip_exception(struct pt_regs *regs)unsigned long *reg_addr;void __user *uaddr;struct insn insn; -int seg_defs;if (!regs)return false;
@@ -357,27 +356,7 @@ bool fixup_umip_exception(struct pt_regs *regs)if (!nr_copied)return false; -insn_init (&insn, buf, nr_copied,user_64bit_mode (regs)); - -/* -* Override the default operand and address sizes with what is specified -* in the code segment descriptor. The instruction decoder only sets -* the address size it to either 4 or 8 address bytes and does nothing -* for the operand bytes. This OK for most of the cases, but we could -* have special cases where, for instance, a 16-bit code segment -* descriptor is used. -* If there is an address override prefix, the instruction decoder -* correctly updates these values, even for 16-bit defaults. -*/ - seg_defs =insn_get_code_seg_params (regs); -if (seg_defs == -EINVAL ) -return false; - - insn.addr_bytes =INSN_CODE_SEG_ADDR_SZ (seg_defs); - insn.opnd_bytes =INSN_CODE_SEG_OPND_SZ (seg_defs); - -insn_get_length (&insn); -if (nr_copied < insn.length) +if (!insn_decode (&insn, regs, buf, nr_copied))return false; umip_inst =identify_insn (&insn);
arch/x86/lib/insn-eval.c +45 -0
48 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 10/76 x86/insn: Add insn_get_modrm_reg_off()
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add a function to the instruction decoder which returns the pt_regs offset of the register specified in the reg field of the modrm byte.
--- arch/x86/include/asm/insn-eval.h | 1 + arch/x86/lib/insn-eval.c | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+)
arch/x86/include/asm/insn-eval.h +1 -0
@@ -17,6 +17,7 @@void __user *insn_get_addr_ref (struct insn *insn,struct pt_regs *regs);int insn_get_modrm_rm_off (struct insn *insn,struct pt_regs *regs); +int insn_get_modrm_reg_off (struct insn *insn,struct pt_regs *regs);unsigned long insn_get_seg_base (struct pt_regs *regs,int seg_reg_idx);int insn_get_code_seg_params (struct pt_regs *regs); int insn_fetch_from_user(struct pt_regs *regs,
arch/x86/lib/insn-eval.c +23 -0
@@ -20,6 +20,7 @@enum reg_type {REG_TYPE_RM =0 , +REG_TYPE_REG ,REG_TYPE_INDEX ,REG_TYPE_BASE , };
@@ -441,6 +442,13 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs, regno +=8 ;break ; +case REG_TYPE_REG : + regno =X86_MODRM_REG (insn->modrm.value); + +if (X86_REX_R (insn->rex_prefix.value)) + regno +=8 ; +break ; +case REG_TYPE_INDEX : regno =X86_SIB_INDEX (insn->sib.value);if (X86_REX_X (insn->rex_prefix.value))
@@ -809,6 +817,21 @@ int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs)return get_reg_offset (insn, regs,REG_TYPE_RM ); } +/** +* insn_get_modrm_reg_off() - Obtain register in reg part of the ModRM byte +* @insn: Instruction containing the ModRM byte +* @regs: Register values as seen when entering kernel mode +* +* Returns: +* +* The register indicated by the reg part of the ModRM byte. The +* register is obtained as an offset from the base of pt_regs. +*/ +int insn_get_modrm_reg_off (struct insn *insn,struct pt_regs *regs) +{ +return get_reg_offset (insn, regs,REG_TYPE_REG ); +} +/** * get_seg_base_limit() - obtain base address and limit of a segment * @insn: Instruction. Must be valid.
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 11/76 x86/insn: Add insn_has_rep_prefix() helper
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add a function to check whether an instruction has a REP prefix.
--- arch/x86/include/asm/insn-eval.h | 1 + arch/x86/lib/insn-eval.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+)
arch/x86/include/asm/insn-eval.h +1 -0
@@ -15,6 +15,7 @@#define INSN_CODE_SEG_OPND_SZ (params) (params & 0xf)#define INSN_CODE_SEG_PARAMS (oper_sz, addr_sz) (oper_sz | (addr_sz << 4)) +bool insn_has_rep_prefix (struct insn *insn);void __user *insn_get_addr_ref (struct insn *insn,struct pt_regs *regs);int insn_get_modrm_rm_off (struct insn *insn,struct pt_regs *regs);int insn_get_modrm_reg_off (struct insn *insn,struct pt_regs *regs);
arch/x86/lib/insn-eval.c +24 -0
@@ -53,6 +53,30 @@ static bool is_string_insn(struct insn *insn) } } +/** +* insn_has_rep_prefix() - Determine if instruction has a REP prefix +* @insn: Instruction containing the prefix to inspect +* +* Returns: +* +* true if the instruction has a REP prefix, false if not. +*/ +bool insn_has_rep_prefix (struct insn *insn) +{ +int i; + +insn_get_prefixes (insn); + +for (i =0 ; i < insn->prefixes.nbytes; i++) { +insn_byte_t p = insn->prefixes.bytes[i]; + +if (p ==0xf2 || p ==0xf3 ) +return true; + } + +return false; +} +/** * get_seg_reg_override_idx() - obtain segment register override index * @insn: Valid instruction with segment override prefixes
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 12/76 x86/boot/compressed/64: Disable red-zone usage
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The x86-64 ABI defines a red-zone on the stack:
The 128-byte area beyond the location pointed to by %rsp is considered to be reserved and shall not be modified by signal or interrupt handlers. Therefore, functions may use this area for temporary data that is not needed across function calls. In particular, leaf functions may use this area for their entire stack frame, rather than adjusting the stack pointer in the prologue and epilogue. This area is known as the red zone.
This is not compatible with exception handling, because the IRET frame written by the hardware at the stack pointer and the functions to handle the exception will overwrite the temporary variables of the interrupted function, causing undefined behavior. So disable red-zones for the pre-decompression boot code.
--- arch/x86/boot/compressed/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/boot/compressed/Makefile +1 -1
@@ -32,7 +32,7 @@ KBUILD_CFLAGS := -m$(BITS) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIE KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING cflags-$(CONFIG_X86_32) := -march=i386 -cflags-$(CONFIG_X86_64) := -mcmodel=small +cflags-$(CONFIG_X86_64) := -mcmodel=small -mno-red-zone KBUILD_CFLAGS += $(cflags-y) KBUILD_CFLAGS += -mno-mmx -mno-sse KBUILD_CFLAGS += -ffreestanding
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 13/76 x86/boot/compressed/64: Add IDT Infrastructure
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add code needed to setup an IDT in the early pre-decompression boot-code. The IDT is loaded first in startup_64, which is after EfiExitBootServices() has been called, and later reloaded when the kernel image has been relocated to the end of the decompression area.
This allows to setup different IDT handlers before and after the relocation.
--- arch/x86/boot/compressed/Makefile | 1 + arch/x86/boot/compressed/head_64.S | 25 +++++++- arch/x86/boot/compressed/idt_64.c | 44 ++++++++++++++ arch/x86/boot/compressed/idt_handlers_64.S | 70 ++++++++++++++++++++++ arch/x86/boot/compressed/misc.h | 5 ++ arch/x86/include/asm/desc_defs.h | 3 + 6 files changed, 147 insertions(+), 1 deletion(-) create mode 100644 arch/x86/boot/compressed/idt_64.c create mode 100644 arch/x86/boot/compressed/idt_handlers_64.S
arch/x86/boot/compressed/Makefile +1 -0
@@ -78,6 +78,7 @@ vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o ifdef CONFIG_X86_64 vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr_64.o + vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o vmlinux-objs-y += $(obj)/mem_encrypt.o vmlinux-objs-y += $(obj)/pgtable_64.o endif
arch/x86/boot/compressed/head_64.S +24 -1
@@ -33,6 +33,7 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> #include <asm/bootparam.h> +#include <asm/desc_defs.h> #include "pgtable.h" /*
@@ -415,6 +416,10 @@ SYM_CODE_START(startup_64) .Lon_kernel_cs: + pushq %rsi + call load_stage1_idt + popq %rsi + /* * paging_prepare() sets up the trampoline and checks if we need to * enable 5-level paging.
@@ -527,6 +532,13 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) shrq $3, %rcx rep stosq +/* + * Load stage2 IDT + */ + pushq %rsi + call load_stage2_idt + popq %rsi + /* * Do the extraction, and jump to the new kernel.. */
@@ -659,10 +671,21 @@ SYM_DATA_START_LOCAL(gdt) .quad 0x0000000000000000 /* TS continued */ SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end) +SYM_DATA_START(boot_idt_desc) + .word boot_idt_end - boot_idt + .quad 0 +SYM_DATA_END(boot_idt_desc) + .balign 8 +SYM_DATA_START(boot_idt) + .rept BOOT_IDT_ENTRIES + .quad 0 + .quad 0 + .endr +SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end) + #ifdef CONFIG_EFI_STUB SYM_DATA(image_offset, .long 0) #endif - #ifdef CONFIG_EFI_MIXED SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0) SYM_DATA(efi_is64, .byte 1)
arch/x86/boot/compressed/idt_64.c new file +44 -0
44 lines not on this page · raw message
arch/x86/boot/compressed/idt_handlers_64.S new file +70 -0
70 lines not on this page · raw message
arch/x86/boot/compressed/misc.h +5 -0
@@ -23,6 +23,7 @@#include <asm/page.h> #include <asm/boot.h> #include <asm/bootparam.h> +#include <asm/desc_defs.h> #define BOOT_CTYPE_H #include <linux/acpi.h>
@@ -133,4 +134,8 @@ int count_immovable_mem_regions(void);static inline int count_immovable_mem_regions (void ) {return 0 ; }#endif +/* idt_64.c */ +extern gate_desc boot_idt[BOOT_IDT_ENTRIES ]; +extern struct desc_ptr boot_idt_desc; +#endif /* BOOT_COMPRESSED_MISC_H */
arch/x86/include/asm/desc_defs.h +3 -0
@@ -109,6 +109,9 @@ struct desc_ptr {#endif /* !__ASSEMBLY__ */ +/* Boot IDT definitions */ +#define BOOT_IDT_ENTRIES 32 +/* Access rights as returned by LAR */ #define AR_TYPE_RODATA (0 * (1 << 9))#define AR_TYPE_RWDATA (1 * (1 << 9))
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH v6 13/76] x86/boot/compressed/64: Add IDT Infrastructure
Quoted 25 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
Add code needed to setup an IDT in the early pre-decompression boot-code. The IDT is loaded first in
startup_64, which is afterEfiExitBootServices()has been called, and later reloaded when the kernel image has been relocated to the end of the decompression area.This allows to setup different IDT handlers before and after the relocation.
Signed-off-by Joerg Roedel <[email protected]>arch/x86/boot/compressed/head_64.S +1
-0@@ -33,6 +33,7 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> #include <asm/bootparam.h> +#include <asm/desc_defs.h> #include "pgtable.h" /*
arch/x86/boot/compressed/head_64.S SYM_CODE_START(startup_64) · line 422
Quoted 7 lines
arch/x86/boot/compressed/head_64.S +4
-0@@ -415,6 +416,10 @@ SYM_CODE_START(startup_64) .Lon_kernel_cs: + pushq %rsi + call load_stage1_idt + popq %rsi +
Do we need the functions later in the series or could this just use lidt directly?
Is there any risk of exceptions getting triggered during the move of the compressed kernel, before the stage2 reload?
arch/x86/boot/compressed/head_64.S SYM_DATA_START_LOCAL(gdt) · line 675
Quoted 3 lines
arch/x86/boot/compressed/head_64.S +2
-0+SYM_DATA_START(boot_idt_desc) + .word boot_idt_end - boot_idt
I think this should be boot_idt_end - boot_idt - 1, right?
The limit value is expressed in bytes and is added to the base address to get the address of the last valid byte. A limit value of 0 results in exactly 1 valid byte. Because IDT entries are always eight bytes long, the limit should always be one less than an integral multiple of eight (that is, 8N – 1).
Quoted 10 lines
arch/x86/boot/compressed/head_64.S +10
-0+ .quad 0 +SYM_DATA_END(boot_idt_desc) + .balign 8 +SYM_DATA_START(boot_idt) + .rept BOOT_IDT_ENTRIES + .quad 0 + .quad 0 + .endr +SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end) +
Re: [PATCH v6 13/76] x86/boot/compressed/64: Add IDT Infrastructure
Hi Arvind,
Quoted 8 lines · Arvind Sankar
arch/x86/boot/compressed/head_64.S SYM_CODE_START(startup_64) · line 422
Quoted 4 lines · Joerg Roedel
arch/x86/boot/compressed/head_64.S +4
-0+ pushq %rsi + call load_stage1_idt + popq %rsi +Do we need the functions later in the series or could this just use lidt directly?
The function also sets up the actual IDT entries in the table before doing the lidt, so this needs to be a call to a C function. Setting up IDT entries in assembly does not result in readable code.
Quoted 2 lines
Is there any risk of exceptions getting triggered during the move of the compressed kernel, before the stage2 reload?
No, that would be a bug in either the UEFI BIOS or in the boot code. When the kernel image is moved to the end of the decompression buffer it still runs on the EFI page-table.
With the changes in this patch-set there will be page-faults when the kernel is actually decompressed. But that happens after the stage2-idt is loaded.
Quoted 9 lines
arch/x86/boot/compressed/head_64.S SYM_DATA_START_LOCAL(gdt) · line 675
Quoted 2 lines
arch/x86/boot/compressed/head_64.S +2
-0+SYM_DATA_START(boot_idt_desc) + .word boot_idt_end - boot_idtI think this should be
boot_idt_end-boot_idt- 1, right?
The limit value is expressed in bytes and is added to the base address to get the address of the last valid byte. A limit value of 0 results in exactly 1 valid byte. Because IDT entries are always eight bytes long, the limit should always be one less than an integral multiple of eight (that is, 8N – 1).
You are right, I will fix that, thanks.
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH v6 13/76] x86/boot/compressed/64: Add IDT Infrastructure
Quoted 12 lines · Joerg Roedel
Hi Arvind,
Quoted 8 lines · Arvind Sankar
arch/x86/boot/compressed/head_64.S SYM_CODE_START(startup_64) · line 422
Quoted 4 lines · Joerg Roedel
arch/x86/boot/compressed/head_64.S +4
-0+ pushq %rsi + call load_stage1_idt + popq %rsi +Do we need the functions later in the series or could this just use lidt directly?
Quoted 4 lines
The function also sets up the actual IDT entries in the table before doing the lidt, so this needs to be a call to a C function. Setting up IDT entries in assembly does not result in readable code.
Ah ok, I missed that in the later patches.
Thanks.
PATCH v6 14/76 x86/boot/compressed/64: Rename kaslr_64.c to ident_map_64.c
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The file contains only code related to identity mapped page-tables. Rename the file and compile it always in.
---
arch/x86/boot/compressed/Makefile | 2 +-
arch/x86/boot/compressed/{kaslr_64.c => ident_map_64.c} | 9 +++++++++
arch/x86/boot/compressed/kaslr.c | 9 ---------
arch/x86/boot/compressed/misc.h | 8 ++++++++
4 files changed, 18 insertions(+), 10 deletions(-)
rename arch/x86/boot/compressed/{kaslr_64.c => ident_map_64.c} (95%)arch/x86/boot/compressed/Makefile +1 -1
@@ -77,7 +77,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(obj)/kernel_info.o $(obj)/head_$(BITS).o vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o ifdef CONFIG_X86_64 - vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr_64.o + vmlinux-objs-y += $(obj)/ident_map_64.o vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o vmlinux-objs-y += $(obj)/mem_encrypt.o vmlinux-objs-y += $(obj)/pgtable_64.o
arch/x86/boot/compressed/ident_map_64.c renamed from arch/x86/boot/compressed/kaslr_64.c +9 -0
@@ -29,6 +29,15 @@#define __PAGE_OFFSET __PAGE_OFFSET_BASE#include "../../mm/ident_map.c" +#ifdef CONFIG_X86_5LEVEL +unsigned int __pgtable_l5_enabled; +unsigned int pgdir_shift =39 ; +unsigned int ptrs_per_p4d =1 ; +#endif + +/* Used by PAGE_KERN* macros: */ +pteval_t __default_kernel_pte_mask__read_mostly = ~0 ; +/* Used to track our page table allocation area. */ struct alloc_pgt_data {unsigned char *pgt_buf;
arch/x86/boot/compressed/kaslr.c +0 -9
@@ -40,17 +40,8 @@#include <asm/setup.h> /* For COMMAND_LINE_SIZE */ #undef _SETUP -#ifdef CONFIG_X86_5LEVEL -unsigned int __pgtable_l5_enabled; -unsigned int pgdir_shift__ro_after_init =39 ; -unsigned int ptrs_per_p4d__ro_after_init =1 ; -#endif -extern unsigned long get_cmd_line_ptr (void ); -/* Used by PAGE_KERN* macros: */ -pteval_t __default_kernel_pte_mask__read_mostly = ~0 ; -/* Simplified build-specific string for starting entropy. */ static const char build_str[] =UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION ;
arch/x86/boot/compressed/misc.h +8 -0
@@ -134,6 +134,14 @@ int count_immovable_mem_regions(void);static inline int count_immovable_mem_regions (void ) {return 0 ; }#endif +/* ident_map_64.c */ +#ifdef CONFIG_X86_5LEVEL +extern unsigned int __pgtable_l5_enabled, pgdir_shift, ptrs_per_p4d; +#endif + +/* Used by PAGE_KERN* macros: */ +extern pteval_t __default_kernel_pte_mask; +/* idt_64.c */ extern gate_desc boot_idt[BOOT_IDT_ENTRIES ];extern struct desc_ptr boot_idt_desc;
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 15/76 x86/boot/compressed/64: Add page-fault handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Install a page-fault handler to add an identity mapping to addresses not yet mapped. Also do some checking whether the error code is sane.
This makes non SEV-ES machines use the exception handling infrastructure in the pre-decompressions boot code too, making it less likely to break in the future.
--- arch/x86/boot/compressed/ident_map_64.c | 39 ++++++++++++++++++++++ arch/x86/boot/compressed/idt_64.c | 2 ++ arch/x86/boot/compressed/idt_handlers_64.S | 2 ++ arch/x86/boot/compressed/misc.h | 6 ++++ 4 files changed, 49 insertions(+)
arch/x86/boot/compressed/ident_map_64.c +39 -0
@@ -19,10 +19,13 @@/* No PAGE_TABLE_ISOLATION support needed either: */ #undef CONFIG_PAGE_TABLE_ISOLATION +#include "error.h" #include "misc.h" /* These actually do the work of building the kernel identity maps. */ #include <linux/pgtable.h> +#include <asm/trap_pf.h> +#include <asm/trapnr.h> #include <asm/init.h> /* Use the static base for this part of the boot process */ #undef __PAGE_OFFSET
@@ -160,3 +163,39 @@ void finalize_identity_maps(void) {write_cr3 (top_level_pgt); } + +static void do_pf_error (const char *msg,unsigned long error_code, +unsigned long address,unsigned long ip) +{ +error_putstr (msg); + +error_putstr ("\nError Code: " ); +error_puthex (error_code); +error_putstr ("\nCR2: 0x" ); +error_puthex (address); +error_putstr ("\nRIP relative to _head: 0x" ); +error_puthex (ip - (unsigned long )_head); +error_putstr ("\n" ); + +error ("Stopping.\n" ); +} + +void do_boot_page_fault (struct pt_regs *regs,unsigned long error_code) +{ +unsigned long address =native_read_cr2 (); + +/* +* Check for unexpected error codes. Unexpected are: +* - Faults on present pages +* - User faults +* - Reserved bits set +*/ +if (error_code & (X86_PF_PROT |X86_PF_USER |X86_PF_RSVD )) +do_pf_error ("Unexpected page-fault:" , error_code, address, regs->ip); + +/* +* Error code is sane - now identity map the 2M region around +* the faulting address. +*/ +add_identity_map (address &PMD_MASK ,PMD_SIZE ); +}
arch/x86/boot/compressed/idt_64.c +2 -0
@@ -40,5 +40,7 @@ void load_stage2_idt(void) { boot_idt_desc.address = (unsigned long )boot_idt; +set_idt_entry (X86_TRAP_PF , boot_page_fault); +load_boot_idt (&boot_idt_desc); }
arch/x86/boot/compressed/idt_handlers_64.S +2 -0
@@ -68,3 +68,5 @@ SYM_FUNC_END(\name) .text .code64 + +EXCEPTION_HANDLER boot_page_fault do_boot_page_fault error_code=1
arch/x86/boot/compressed/misc.h +6 -0
@@ -37,6 +37,9 @@#define memptr unsigned#endif +/* boot/compressed/vmlinux start and end markers */ +extern char _head[], _end[]; +/* misc.c */ extern memptr free_mem_ptr;extern memptr free_mem_end_ptr;
@@ -146,4 +149,7 @@ extern pteval_t __default_kernel_pte_mask;extern gate_desc boot_idt[BOOT_IDT_ENTRIES ];extern struct desc_ptr boot_idt_desc; +/* IDT Entry Points */ +void boot_page_fault (void ); +#endif /* BOOT_COMPRESSED_MISC_H */
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 16/76 x86/boot/compressed/64: Always switch to own page-table
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
When booted through startup_64 the kernel keeps running on the EFI page-table until the KASLR code sets up its own page-table. Without KASLR the pre-decompression boot code never switches off the EFI page-table. Change that by unconditionally switching to a kernel controlled page-table after relocation.
This makes sure we can make changes to the mapping when necessary, for example map pages unencrypted in SEV and SEV-ES guests.
Also remove the debug_putstr() calls in initialize_identity_maps() because the function now runs before console_init() is called.
--- arch/x86/boot/compressed/head_64.S | 3 +- arch/x86/boot/compressed/ident_map_64.c | 51 +++++++++++++++---------- arch/x86/boot/compressed/kaslr.c | 3 -- 3 files changed, 32 insertions(+), 25 deletions(-)
arch/x86/boot/compressed/head_64.S +2 -1
@@ -533,10 +533,11 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) rep stosq /* - * Load stage2 IDT + * Load stage2 IDT and switch to our own page-table */ pushq %rsi call load_stage2_idt + call initialize_identity_maps popq %rsi /*
arch/x86/boot/compressed/ident_map_64.c +30 -21
76 lines not on this page · raw message
arch/x86/boot/compressed/kaslr.c +0 -3
@@ -861,9 +861,6 @@ void choose_random_location(unsigned long input, boot_params->hdr.loadflags |=KASLR_FLAG ; -/* Prepare to add new identity pagetables on demand. */ -initialize_identity_maps (); -if (IS_ENABLED (CONFIG_X86_32 )) mem_limit =KERNEL_IMAGE_SIZE ;else
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 17/76 x86/boot/compressed/64: Don't pre-map memory in KASLR code
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
With the page-fault handler in place the identity mapping can be built on-demand. So remove the code which manually creates the mappings and unexport/remove the functions used for it.
--- arch/x86/boot/compressed/ident_map_64.c | 6 ++---- arch/x86/boot/compressed/kaslr.c | 24 +----------------------- arch/x86/boot/compressed/misc.h | 10 ---------- 3 files changed, 3 insertions(+), 37 deletions(-)
arch/x86/boot/compressed/ident_map_64.c +2 -4
@@ -87,11 +87,9 @@ phys_addr_t physical_mask = (1ULL << __PHYSICAL_MASK_SHIFT) - 1;static struct x86_mapping_info mapping_info;/* -* Adds the specified range to what will become the new identity mappings. -* Once all ranges have been added, the new mapping is activated by calling -* finalize_identity_maps() below. +* Adds the specified range to the identity mappings. */ -void add_identity_map (unsigned long start,unsigned long size) +static void add_identity_map (unsigned long start,unsigned long size) {unsigned long end = start + size;
arch/x86/boot/compressed/kaslr.c +1 -23
@@ -397,8 +397,6 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,*/ mem_avoid[MEM_AVOID_ZO_RANGE ].start = input; mem_avoid[MEM_AVOID_ZO_RANGE ].size = (output + init_size) - input; -add_identity_map (mem_avoid[MEM_AVOID_ZO_RANGE ].start, - mem_avoid[MEM_AVOID_ZO_RANGE ].size);/* Avoid initrd. */ initrd_start = (u64 )boot_params->ext_ramdisk_image <<32 ;
@@ -416,15 +414,11 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size, cmd_line_size =strnlen ((char *)cmd_line,COMMAND_LINE_SIZE -1 ) +1 ; mem_avoid[MEM_AVOID_CMDLINE ].start = cmd_line; mem_avoid[MEM_AVOID_CMDLINE ].size = cmd_line_size; -add_identity_map (mem_avoid[MEM_AVOID_CMDLINE ].start, - mem_avoid[MEM_AVOID_CMDLINE ].size); }/* Avoid boot parameters. */ mem_avoid[MEM_AVOID_BOOTPARAMS ].start = (unsigned long )boot_params; mem_avoid[MEM_AVOID_BOOTPARAMS ].size =sizeof (*boot_params); -add_identity_map (mem_avoid[MEM_AVOID_BOOTPARAMS ].start, - mem_avoid[MEM_AVOID_BOOTPARAMS ].size);/* We don't need to set a mapping for setup_data. */
@@ -433,11 +427,6 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,/* Enumerate the immovable memory regions */ num_immovable_mem =count_immovable_mem_regions (); - -#ifdef CONFIG_X86_VERBOSE_BOOTUP -/* Make sure video RAM can be used. */ -add_identity_map (0 ,PMD_SIZE ); -#endif }/*
@@ -884,19 +873,8 @@ void choose_random_location(unsigned long input,warn ("Physical KASLR disabled: no suitable memory region!" ); }else {/* Update the new physical address location. */ -if (*output != random_addr) { -add_identity_map (random_addr, output_size); +if (*output != random_addr) *output = random_addr; - } - -/* -* This loads the identity mapping page table. -* This should only be done if a new physical address -* is found for the kernel, otherwise we should keep -* the old page table to make it be like the "nokaslr" -* case. -*/ -finalize_identity_maps (); }
arch/x86/boot/compressed/misc.h +0 -10
@@ -98,17 +98,7 @@ static inline void choose_random_location(unsigned long input,#endif #ifdef CONFIG_X86_64 -void initialize_identity_maps (void ); -void add_identity_map (unsigned long start,unsigned long size); -void finalize_identity_maps (void );extern unsigned char _pgtable[]; -#else -static inline void initialize_identity_maps (void ) -{ } -static inline void add_identity_map (unsigned long start,unsigned long size) -{ } -static inline void finalize_identity_maps (void ) -{ }#endif #ifdef CONFIG_EARLY_PRINTK
Signature · 1 line
2.28.0
PATCH v6 18/76 x86/boot/compressed/64: Change add_identity_map() to take start and end
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Changing the function to take start and end as parameters instead of start and size simplifies the callers, which don't need to calculate the size if they already have start and end.
--- arch/x86/boot/compressed/ident_map_64.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)
arch/x86/boot/compressed/ident_map_64.c +5 -10
@@ -89,10 +89,8 @@ static struct x86_mapping_info mapping_info;/* * Adds the specified range to the identity mappings. */ -static void add_identity_map (unsigned long start,unsigned long size) +static void add_identity_map (unsigned long start,unsigned long end) { -unsigned long end = start + size; -/* Align boundary to 2M. */ start =round_down (start,PMD_SIZE ); end =round_up (end,PMD_SIZE );
@@ -107,8 +105,6 @@ static void add_identity_map(unsigned long start, unsigned long size)/* Locates and clears a region for a new top level page table. */ void initialize_identity_maps (void ) { -unsigned long start, size; -/* If running as an SEV guest, the encryption mask is required. */ set_sev_encryption_mask ();
@@ -155,9 +151,7 @@ void initialize_identity_maps(void)* New page-table is set up - map the kernel image and load it * into cr3. */ - start = (unsigned long )_head; - size = _end - _head; -add_identity_map (start, size); +add_identity_map ((unsigned long )_head, (unsigned long )_end);write_cr3 (top_level_pgt); }
@@ -189,7 +183,8 @@ static void do_pf_error(const char *msg, unsigned long error_code,void do_boot_page_fault (struct pt_regs *regs,unsigned long error_code) { -unsigned long address =native_read_cr2 (); +unsigned long address =native_read_cr2 () &PMD_MASK ; +unsigned long end = address +PMD_SIZE ;/* * Check for unexpected error codes. Unexpected are:
@@ -204,5 +199,5 @@ void do_boot_page_fault(struct pt_regs *regs, unsigned long error_code)* Error code is sane - now identity map the 2M region around * the faulting address. */ -add_identity_map (address &PMD_MASK ,PMD_SIZE ); +add_identity_map (address, end); }
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 19/76 x86/boot/compressed/64: Add stage1 #VC handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add the first handler for #VC exceptions. At stage 1 there is no GHCB yet becaue the kernel might still be running on the EFI page table.
The stage 1 handler is limited to the MSR based protocol to talk to the hypervisor and can only support CPUID exit-codes, but that is enough to get to stage 2.
--- arch/x86/boot/compressed/Makefile | 1 + arch/x86/boot/compressed/idt_64.c | 4 ++ arch/x86/boot/compressed/idt_handlers_64.S | 4 ++ arch/x86/boot/compressed/misc.h | 1 + arch/x86/boot/compressed/sev-es.c | 45 +++++++++++++++ arch/x86/include/asm/msr-index.h | 1 + arch/x86/include/asm/sev-es.h | 37 ++++++++++++ arch/x86/include/asm/trapnr.h | 1 + arch/x86/kernel/sev-es-shared.c | 66 ++++++++++++++++++++++ 9 files changed, 160 insertions(+) create mode 100644 arch/x86/boot/compressed/sev-es.c create mode 100644 arch/x86/include/asm/sev-es.h create mode 100644 arch/x86/kernel/sev-es-shared.c
arch/x86/boot/compressed/Makefile +1 -0
@@ -81,6 +81,7 @@ ifdef CONFIG_X86_64 vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o vmlinux-objs-y += $(obj)/mem_encrypt.o vmlinux-objs-y += $(obj)/pgtable_64.o + vmlinux-objs-$(CONFIG_AMD_MEM_ENCRYPT) += $(obj)/sev-es.o endif vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o
arch/x86/boot/compressed/idt_64.c +4 -0
@@ -32,6 +32,10 @@ void load_stage1_idt(void) { boot_idt_desc.address = (unsigned long )boot_idt; + +if (IS_ENABLED (CONFIG_AMD_MEM_ENCRYPT )) +set_idt_entry (X86_TRAP_VC , boot_stage1_vc); +load_boot_idt (&boot_idt_desc); }
arch/x86/boot/compressed/idt_handlers_64.S +4 -0
@@ -70,3 +70,7 @@ SYM_FUNC_END(\name) .code64 EXCEPTION_HANDLER boot_page_fault do_boot_page_fault error_code=1 + +#ifdef CONFIG_AMD_MEM_ENCRYPT +EXCEPTION_HANDLER boot_stage1_vc do_vc_no_ghcb error_code=1 +#endif
arch/x86/boot/compressed/misc.h +1 -0
@@ -141,5 +141,6 @@ extern struct desc_ptr boot_idt_desc;/* IDT Entry Points */ void boot_page_fault (void ); +void boot_stage1_vc (void );#endif /* BOOT_COMPRESSED_MISC_H */
arch/x86/boot/compressed/sev-es.c new file +45 -0
45 lines not on this page · raw message
arch/x86/include/asm/msr-index.h +1 -0
@@ -466,6 +466,7 @@#define MSR_AMD64_IBSBRTARGET 0xc001103b#define MSR_AMD64_IBSOPDATA4 0xc001103d#define MSR_AMD64_IBS_REG_COUNT_MAX 8/* includes MSR_AMD64_IBSBRTARGET */ +#define MSR_AMD64_SEV_ES_GHCB 0xc0010130#define MSR_AMD64_SEV 0xc0010131#define MSR_AMD64_SEV_ENABLED_BIT 0#define MSR_AMD64_SEV_ENABLED BIT_ULL(MSR_AMD64_SEV_ENABLED_BIT)
arch/x86/include/asm/sev-es.h new file +37 -0
@@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* AMD Encrypted Register State Support +* +* Author: Joerg Roedel <[email protected]> +*/ + +#ifndef __ASM_ENCRYPTED_STATE_H +#define __ASM_ENCRYPTED_STATE_H + +#include <linux/types.h> + +#define GHCB_SEV_CPUID_REQ 0x004UL +#define GHCB_CPUID_REQ_EAX 0 +#define GHCB_CPUID_REQ_EBX 1 +#define GHCB_CPUID_REQ_ECX 2 +#define GHCB_CPUID_REQ_EDX 3 +#define GHCB_CPUID_REQ (fn, reg) (GHCB_SEV_CPUID_REQ | \ + (((unsigned long)reg & 3) << 30) | \ + (((unsigned long)fn) << 32)) + +#define GHCB_SEV_CPUID_RESP 0x005UL +#define GHCB_SEV_TERMINATE 0x100UL + +#define GHCB_SEV_GHCB_RESP_CODE (v) ((v) & 0xfff) +#define VMGEXIT () { asm volatile("rep; vmmcall\n\r"); } + +void __init do_vc_no_ghcb (struct pt_regs *regs,unsigned long exit_code); + +static inline u64 lower_bits (u64 val,unsigned int bits) +{ +u64 mask = (1ULL << bits) -1 ; + +return (val & mask); +} + +#endif
arch/x86/include/asm/trapnr.h +1 -0
@@ -26,6 +26,7 @@#define X86_TRAP_XF 19/* SIMD Floating-Point Exception */ #define X86_TRAP_VE 20/* Virtualization Exception */ #define X86_TRAP_CP 21/* Control Protection Exception */ +#define X86_TRAP_VC 29/* VMM Communication Exception */ #define X86_TRAP_IRET 32/* IRET Exception */ #endif
arch/x86/kernel/sev-es-shared.c new file +66 -0
66 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 20/76 x86/boot/compressed/64: Call set_sev_encryption_mask earlier
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Call set_sev_encryption_mask() while still on the stage 1 #VC-handler, because the stage 2 handler needs our own page-tables to be set up, to which calling set_sev_encryption_mask() is a prerequisite.
--- arch/x86/boot/compressed/head_64.S | 8 +++++++- arch/x86/boot/compressed/ident_map_64.c | 3 --- 2 files changed, 7 insertions(+), 4 deletions(-)
arch/x86/boot/compressed/head_64.S +7 -1
@@ -533,9 +533,15 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) rep stosq /* - * Load stage2 IDT and switch to our own page-table + * If running as an SEV guest, the encryption mask is required in the + * page-table setup code below. When the guest also has SEV-ES enabled + * set_sev_encryption_mask() will cause #VC exceptions, but the stage2 + * handler can't map its GHCB because the page-table is not set up yet. + * So set up the encryption mask here while still on the stage1 #VC + * handler. Then load stage2 IDT and switch to our own page-table. */ pushq %rsi + call set_sev_encryption_mask call load_stage2_idt call initialize_identity_maps popq %rsi
arch/x86/boot/compressed/ident_map_64.c +0 -3
@@ -105,9 +105,6 @@ static void add_identity_map(unsigned long start, unsigned long end)/* Locates and clears a region for a new top level page table. */ void initialize_identity_maps (void ) { -/* If running as an SEV guest, the encryption mask is required. */ -set_sev_encryption_mask (); -/* Exclude the encryption mask from __PHYSICAL_MASK */ physical_mask &= ~sme_me_mask;
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 20/76] x86/boot/compressed/64: Call set_sev_encryption_mask earlier
On Mon, Aug 24, 2020 at 10:54:15AM +0200, Joerg Roedel wrote:
Just minor style issues to be fixed by committer or in case you have to send a new version:
Subject: Re: [PATCH v6 20/76] x86/boot/compressed/64: Call set_sev_encryption_mask earlier
set_sev_encryption_mask() <- it is a function.
Quoted 4 lines
From: Joerg Roedel <[email protected]>
Call
set_sev_encryption_mask()while still on the stage 1 #VC-handler, because the stage 2 handler needs our own page-tables to be set up, to
"... needs the kernel's own page tables to be set up... "
"we" is almost always ambiguous and should be avoided by formulating the commit message in passive voice.
Quoted 14 lines
which calling
set_sev_encryption_mask()is a prerequisite.Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/boot/compressed/head_64.S | 8 +++++++- arch/x86/boot/compressed/ident_map_64.c | 3 --- 2 files changed, 7 insertions(+), 4 deletions(-)arch/x86/boot/compressed/head_64.S +0
-0
arch/x86/boot/compressed/head_64.S SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) · line 541
Quoted 10 lines
arch/x86/boot/compressed/head_64.S +6
-1@@ -533,9 +533,15 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) rep stosq /* - * Load stage2 IDT and switch to our own page-table + * If running as an SEV guest, the encryption mask is required in the + * page-table setup code below. When the guest also has SEV-ES enabled + * set_sev_encryption_mask() will cause #VC exceptions, but the stage2 + * handler can't map its GHCB because the page-table is not set up yet. + * So set up the encryption mask here while still on the stage1 #VC + * handler. Then load stage2 IDT and switch to our own page-table.
... to the kernel's own page table."
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 21/76 x86/boot/compressed/64: Check return value of kernel_ident_mapping_init()
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The function can fail to create an identity mapping, check for that and bail out if it happens.
--- arch/x86/boot/compressed/ident_map_64.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
arch/x86/boot/compressed/ident_map_64.c +5 -2
@@ -91,6 +91,8 @@ static struct x86_mapping_info mapping_info;*/ static void add_identity_map (unsigned long start,unsigned long end) { +int ret; +/* Align boundary to 2M. */ start =round_down (start,PMD_SIZE ); end =round_up (end,PMD_SIZE );
@@ -98,8 +100,9 @@ static void add_identity_map(unsigned long start, unsigned long end)return ;/* Build the mapping. */ -kernel_ident_mapping_init (&mapping_info, (pgd_t *)top_level_pgt, - start, end); + ret =kernel_ident_mapping_init (&mapping_info, (pgd_t *)top_level_pgt, start, end); +if (ret) +error ("Error: kernel_ident_mapping_init() failed\n" ); }/* Locates and clears a region for a new top level page table. */
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 22/76 x86/boot/compressed/64: Add set_page_en/decrypted() helpers
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The functions are needed to map the GHCB for SEV-ES guests. The GHCB is used for communication with the hypervisor, so its content must not be encrypted. After the GHCB is not needed anymore it must be mapped encrypted again so that the running kernel image can safely re-use the memory.
--- arch/x86/boot/compressed/ident_map_64.c | 133 ++++++++++++++++++++++++ arch/x86/boot/compressed/misc.h | 2 + 2 files changed, 135 insertions(+)
arch/x86/boot/compressed/ident_map_64.c +133 -0
@@ -24,6 +24,7 @@/* These actually do the work of building the kernel identity maps. */ #include <linux/pgtable.h> +#include <asm/cmpxchg.h> #include <asm/trap_pf.h> #include <asm/trapnr.h> #include <asm/init.h>
@@ -165,6 +166,138 @@ void finalize_identity_maps(void)write_cr3 (top_level_pgt); } +static pte_t *split_large_pmd (struct x86_mapping_info *info, +pmd_t *pmdp,unsigned long __address) +{ +unsigned long page_flags; +unsigned long address; +pte_t *pte; +pmd_t pmd; +int i; + + pte = (pte_t *)info->alloc_pgt_page (info->context); +if (!pte) +return NULL ; + + address = __address &PMD_MASK ; +/* No large page - clear PSE flag */ + page_flags = info->page_flag & ~_PAGE_PSE; + +/* Populate the PTEs */ +for (i =0 ; i <PTRS_PER_PMD ; i++) { +set_pte (&pte[i],__pte (address | page_flags)); + address +=PAGE_SIZE ; + } + +/* +* Ideally we need to clear the large PMD first and do a TLB +* flush before we write the new PMD. But the 2M range of the +* PMD might contain the code we execute and/or the stack +* we are on, so we can't do that. But that should be safe here +* because we are going from large to small mappings and we are +* also the only user of the page-table, so there is no chance +* of a TLB multihit. +*/ + pmd =__pmd ((unsigned long )pte | info->kernpg_flag); +set_pmd (pmdp, pmd); +/* Flush TLB to establish the new PMD */ +write_cr3 (top_level_pgt); + +return pte +pte_index (__address); +} + +static void clflush_page (unsigned long address) +{ +unsigned int flush_size; +char *cl, *start, *end; + +/* +* Hardcode cl-size to 64 - CPUID can't be used here because that might +* cause another #VC exception and the GHCB is not ready to use yet. +*/ + flush_size =64 ; + start = (char *)(address &PAGE_MASK ); + end = start +PAGE_SIZE ; + +/* +* First make sure there are no pending writes on the cache-lines to +* flush. +*/ + asmvolatile ("mfence" : : :"memory" ); + +for (cl = start; cl != end; cl += flush_size) +clflush (cl); +} + +static int set_clr_page_flags (struct x86_mapping_info *info, +unsigned long address, +pteval_t set,pteval_t clr) +{ +pgd_t *pgdp = (pgd_t *)top_level_pgt; +p4d_t *p4dp; +pud_t *pudp; +pmd_t *pmdp; +pte_t *ptep, pte; + +/* +* First make sure there is a PMD mapping for 'address'. +* It should already exist, but keep things generic. +* +* To map the page just read from it and fault it in if there is no +* mapping yet. add_identity_map() can't be called here because that +* would unconditionally map the address on PMD level, destroying any +* PTE-level mappings that might already exist. Use assembly here so +* the access won't be optimized away. +*/ + asmvolatile ("mov %[address], %%r9" + :: [address]"g" (*(unsigned long *)address) + :"r9" ,"memory" ); + +/* +* The page is mapped at least with PMD size - so skip checks and walk +* directly to the PMD. +*/ + p4dp =p4d_offset (pgdp, address); + pudp =pud_offset (p4dp, address); + pmdp =pmd_offset (pudp, address); + +if (pmd_large (*pmdp)) + ptep =split_large_pmd (info, pmdp, address); +else + ptep =pte_offset_kernel (pmdp, address); + +if (!ptep) +return -ENOMEM ; + +/* +* Changing encryption attributes of a page requires to flush it from +* the caches. +*/ +if ((set | clr) & _PAGE_ENC) +clflush_page (address); + +/* Update PTE */ + pte = *ptep; + pte =pte_set_flags (pte, set); + pte =pte_clear_flags (pte, clr); +set_pte (ptep, pte); + +/* Flush TLB after changing encryption attribute */ +write_cr3 (top_level_pgt); + +return 0 ; +} + +int set_page_decrypted (unsigned long address) +{ +return set_clr_page_flags (&mapping_info, address,0 , _PAGE_ENC); +} + +int set_page_encrypted (unsigned long address) +{ +return set_clr_page_flags (&mapping_info, address, _PAGE_ENC,0 ); +} +static void do_pf_error (const char *msg,unsigned long error_code,unsigned long address,unsigned long ip) {
arch/x86/boot/compressed/misc.h +2 -0
@@ -98,6 +98,8 @@ static inline void choose_random_location(unsigned long input,#endif #ifdef CONFIG_X86_64 +extern int set_page_decrypted (unsigned long address); +extern int set_page_encrypted (unsigned long address);extern unsigned char _pgtable[];#endif
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 23/76 x86/boot/compressed/64: Setup GHCB Based VC Exception handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Install an exception handler for #VC exception that uses a GHCB. Also add the infrastructure for handling different exit-codes by decoding the instruction that caused the exception and error handling.
--- arch/x86/Kconfig | 1 + arch/x86/boot/compressed/Makefile | 3 + arch/x86/boot/compressed/idt_64.c | 4 + arch/x86/boot/compressed/idt_handlers_64.S | 3 +- arch/x86/boot/compressed/misc.c | 7 + arch/x86/boot/compressed/misc.h | 7 + arch/x86/boot/compressed/sev-es.c | 111 +++++++++++++++ arch/x86/include/asm/sev-es.h | 39 ++++++ arch/x86/include/uapi/asm/svm.h | 1 + arch/x86/kernel/sev-es-shared.c | 154 +++++++++++++++++++++ 10 files changed, 329 insertions(+), 1 deletion(-)
arch/x86/Kconfig +1 -0
@@ -1521,6 +1521,7 @@ config AMD_MEM_ENCRYPT select DYNAMIC_PHYSICAL_MASK select ARCH_USE_MEMREMAP_PROT select ARCH_HAS_FORCE_DMA_UNENCRYPTED + select INSTRUCTION_DECODER help Say yes to enable support for the encryption of system memory. This requires an AMD processor that supports Secure Memory
arch/x86/boot/compressed/Makefile +3 -0
@@ -45,6 +45,9 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables KBUILD_CFLAGS += -D__DISABLE_EXPORTS KBUILD_CFLAGS += -include $(srctree)/include/linux/hidden.h +# sev-es.c inludes generated $(objtree)/arch/x86/lib/inat-tables.c +CFLAGS_sev-es.o += -I$(objtree)/arch/x86/lib/ + KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ GCOV_PROFILE := n UBSAN_SANITIZE :=n
arch/x86/boot/compressed/idt_64.c +4 -0
@@ -46,5 +46,9 @@ void load_stage2_idt(void)set_idt_entry (X86_TRAP_PF , boot_page_fault); +#ifdef CONFIG_AMD_MEM_ENCRYPT +set_idt_entry (X86_TRAP_VC , boot_stage2_vc); +#endif +load_boot_idt (&boot_idt_desc); }
arch/x86/boot/compressed/idt_handlers_64.S +2 -1
@@ -72,5 +72,6 @@ SYM_FUNC_END(\name) EXCEPTION_HANDLER boot_page_fault do_boot_page_fault error_code=1 #ifdef CONFIG_AMD_MEM_ENCRYPT -EXCEPTION_HANDLER boot_stage1_vc do_vc_no_ghcb error_code=1 +EXCEPTION_HANDLER boot_stage1_vc do_vc_no_ghcb error_code=1 +EXCEPTION_HANDLER boot_stage2_vc do_boot_stage2_vc error_code=1 #endif
arch/x86/boot/compressed/misc.c +7 -0
@@ -442,6 +442,13 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,parse_elf (output);handle_relocations (output, output_len, virt_addr);debug_putstr ("done.\nBooting the kernel.\n" ); + +/* +* Flush GHCB from cache and map it encrypted again when running as +* SEV-ES guest. +*/ +sev_es_shutdown_ghcb (); +return output; }
arch/x86/boot/compressed/misc.h +7 -0
@@ -115,6 +115,12 @@ static inline void console_init(void)void set_sev_encryption_mask (void ); +#ifdef CONFIG_AMD_MEM_ENCRYPT +void sev_es_shutdown_ghcb (void ); +#else +static inline void sev_es_shutdown_ghcb (void ) { } +#endif +/* acpi.c */ #ifdef CONFIG_ACPI acpi_physical_address get_rsdp_addr (void );
@@ -144,5 +150,6 @@ extern struct desc_ptr boot_idt_desc;/* IDT Entry Points */ void boot_page_fault (void );void boot_stage1_vc (void ); +void boot_stage2_vc (void );#endif /* BOOT_COMPRESSED_MISC_H */
arch/x86/boot/compressed/sev-es.c +111 -0
129 lines not on this page · raw message
arch/x86/include/asm/sev-es.h +39 -0
@@ -9,7 +9,14 @@#define __ASM_ENCRYPTED_STATE_H#include <linux/types.h> +#include <asm/insn.h> +#define GHCB_SEV_INFO 0x001UL +#define GHCB_SEV_INFO_REQ 0x002UL +#define GHCB_INFO (v) ((v) & 0xfffUL) +#define GHCB_PROTO_MAX (v) (((v) >> 48) & 0xffffUL) +#define GHCB_PROTO_MIN (v) (((v) >> 32) & 0xffffUL) +#define GHCB_PROTO_OUR 0x0001UL#define GHCB_SEV_CPUID_REQ 0x004UL#define GHCB_CPUID_REQ_EAX 0#define GHCB_CPUID_REQ_EBX 1
@@ -19,12 +26,44 @@ (((unsigned long)reg & 3) << 30) | \ (((unsigned long)fn) << 32)) +#define GHCB_PROTOCOL_MAX 0x0001UL +#define GHCB_DEFAULT_USAGE 0x0000UL +#define GHCB_SEV_CPUID_RESP 0x005UL#define GHCB_SEV_TERMINATE 0x100UL +#define GHCB_SEV_TERMINATE_REASON (reason_set, reason_val) \ + (((((u64)reason_set) & 0x7) << 12) | \ + ((((u64)reason_val) & 0xff) << 16)) +#define GHCB_SEV_ES_REASON_GENERAL_REQUEST 0 +#define GHCB_SEV_ES_REASON_PROTOCOL_UNSUPPORTED 1#define GHCB_SEV_GHCB_RESP_CODE (v) ((v) & 0xfff)#define VMGEXIT () { asm volatile("rep; vmmcall\n\r"); } +enum es_result { +ES_OK ,/* All good */ +ES_UNSUPPORTED ,/* Requested operation not supported */ +ES_VMM_ERROR ,/* Unexpected state from the VMM */ +ES_DECODE_FAILED ,/* Instruction decoding failed */ +ES_EXCEPTION ,/* Instruction caused exception */ +ES_RETRY ,/* Retry instruction emulation */ +}; + +struct es_fault_info { +unsigned long vector; +unsigned long error_code; +unsigned long cr2; +}; + +struct pt_regs ; + +/* ES instruction emulation context */ +struct es_em_ctxt { +struct pt_regs *regs; +struct insn insn; +struct es_fault_info fi; +}; +void __init do_vc_no_ghcb (struct pt_regs *regs,unsigned long exit_code);static inline u64 lower_bits (u64 val,unsigned int bits)
arch/x86/include/uapi/asm/svm.h +1 -0
@@ -29,6 +29,7 @@#define SVM_EXIT_WRITE_DR6 0x036#define SVM_EXIT_WRITE_DR7 0x037#define SVM_EXIT_EXCP_BASE 0x040 +#define SVM_EXIT_LAST_EXCP 0x05f#define SVM_EXIT_INTR 0x060#define SVM_EXIT_NMI 0x061#define SVM_EXIT_SMI 0x062
arch/x86/kernel/sev-es-shared.c +154 -0
163 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 24/76 x86/boot/compressed/64: Unmap GHCB page before booting the kernel
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Force a page-fault on any further accesses to the GHCB page when they shouldn't happen anymore. This will catch the bugs where a #VC exception is raised when no one is expected anymore.
--- arch/x86/boot/compressed/ident_map_64.c | 17 +++++++++++++++-- arch/x86/boot/compressed/misc.h | 6 ++++++ arch/x86/boot/compressed/sev-es.c | 14 ++++++++++++++ 3 files changed, 35 insertions(+), 2 deletions(-)
arch/x86/boot/compressed/ident_map_64.c +15 -2
@@ -298,6 +298,11 @@ int set_page_encrypted(unsigned long address)return set_clr_page_flags (&mapping_info, address, _PAGE_ENC,0 ); } +int set_page_non_present (unsigned long address) +{ +return set_clr_page_flags (&mapping_info, address,0 , _PAGE_PRESENT); +} +static void do_pf_error (const char *msg,unsigned long error_code,unsigned long address,unsigned long ip) {
@@ -316,8 +321,14 @@ static void do_pf_error(const char *msg, unsigned long error_code,void do_boot_page_fault (struct pt_regs *regs,unsigned long error_code) { -unsigned long address =native_read_cr2 () &PMD_MASK ; -unsigned long end = address +PMD_SIZE ; +unsigned long address =native_read_cr2 (); +unsigned long end; +bool ghcb_fault; + + ghcb_fault =sev_es_check_ghcb_fault (address); + + address &=PMD_MASK ; + end = address +PMD_SIZE ;/* * Check for unexpected error codes. Unexpected are:
@@ -327,6 +338,8 @@ void do_boot_page_fault(struct pt_regs *regs, unsigned long error_code)*/ if (error_code & (X86_PF_PROT |X86_PF_USER |X86_PF_RSVD ))do_pf_error ("Unexpected page-fault:" , error_code, address, regs->ip); +else if (ghcb_fault) +do_pf_error ("Page-fault on GHCB page:" , error_code, address, regs->ip);/* * Error code is sane - now identity map the 2M region around
arch/x86/boot/compressed/misc.h +6 -0
@@ -100,6 +100,7 @@ static inline void choose_random_location(unsigned long input,#ifdef CONFIG_X86_64 extern int set_page_decrypted (unsigned long address);extern int set_page_encrypted (unsigned long address); +extern int set_page_non_present (unsigned long address);extern unsigned char _pgtable[];#endif
@@ -117,8 +118,13 @@ void set_sev_encryption_mask(void);#ifdef CONFIG_AMD_MEM_ENCRYPT void sev_es_shutdown_ghcb (void ); +extern bool sev_es_check_ghcb_fault (unsigned long address);#else static inline void sev_es_shutdown_ghcb (void ) { } +static inline bool sev_es_check_ghcb_fault (unsigned long address) +{ +return false; +}#endif /* acpi.c */
arch/x86/boot/compressed/sev-es.c +14 -0
@@ -121,6 +121,20 @@ void sev_es_shutdown_ghcb(void)*/ if (set_page_encrypted ((unsigned long )&boot_ghcb_page))error ("Can't map GHCB page encrypted" ); + +/* +* GHCB page is mapped encrypted again and flushed from the cache. +* Mark it non-present now to catch bugs when #VC exceptions trigger +* after this point. +*/ +if (set_page_non_present ((unsigned long )&boot_ghcb_page)) +error ("Can't unmap GHCB page" ); +} + +bool sev_es_check_ghcb_fault (unsigned long address) +{ +/* Check whether the fault was on the GHCB page */ +return ((address &PAGE_MASK ) == (unsigned long )&boot_ghcb_page); }void do_boot_stage2_vc (struct pt_regs *regs,unsigned long exit_code)
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 25/76 x86/sev-es: Add support for handling IOIO exceptions
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Add support for decoding and handling #VC exceptions for IOIO events.
--- arch/x86/boot/compressed/sev-es.c | 32 +++++ arch/x86/kernel/sev-es-shared.c | 214 ++++++++++++++++++++++++++++++ 2 files changed, 246 insertions(+)
arch/x86/boot/compressed/sev-es.c +32 -0
@@ -24,6 +24,35 @@struct ghcb boot_ghcb_page__aligned(PAGE_SIZE) ;struct ghcb *boot_ghcb; +/* +* Copy a version of this function here - insn-eval.c can't be used in +* pre-decompression code. +*/ +static bool insn_has_rep_prefix (struct insn *insn) +{ +int i; + +insn_get_prefixes (insn); + +for (i =0 ; i < insn->prefixes.nbytes; i++) { +insn_byte_t p = insn->prefixes.bytes[i]; + +if (p ==0xf2 || p ==0xf3 ) +return true; + } + +return false; +} + +/* +* Only a dummy for insn_get_seg_base() - Early boot-code is 64bit only and +* doesn't use segments. +*/ +static unsigned long insn_get_seg_base (struct pt_regs *regs,int seg_reg_idx) +{ +return 0UL ; +} +static inline u64 sev_es_rd_ghcb_msr (void ) {unsigned long low, high;
@@ -151,6 +180,9 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code) goto finish;switch (exit_code) { +case SVM_EXIT_IOIO : + result =vc_handle_ioio (boot_ghcb, &ctxt); +break ;default : result =ES_UNSUPPORTED ;break ;
arch/x86/kernel/sev-es-shared.c +214 -0
217 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 26/76 x86/fpu: Move xgetbv()/xsetbv() into separate header
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The xgetbv() function is needed in pre-decompression boot code, but asm/fpu/internal.h can't be included there directly. Doing so opens the door to include-hell due to various include-magic in boot/compressed/misc.h.
Avoid that by moving xgetbv()/xsetbv() to a separate header file and include this instead.
--- arch/x86/include/asm/fpu/internal.h | 30 +------------------------ arch/x86/include/asm/fpu/xcr.h | 34 +++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 29 deletions(-) create mode 100644 arch/x86/include/asm/fpu/xcr.h
arch/x86/include/asm/fpu/internal.h +1 -29
@@ -19,6 +19,7 @@#include <asm/user.h> #include <asm/fpu/api.h> #include <asm/fpu/xstate.h> +#include <asm/fpu/xcr.h> #include <asm/cpufeature.h> #include <asm/trace/fpu.h>
@@ -585,33 +586,4 @@ static inline void switch_fpu_finish(struct fpu *new_fpu) __write_pkru(pkru_val); } -/* -* MXCSR and XCR definitions: -*/ - -static inline void ldmxcsr (u32 mxcsr) -{ - asmvolatile ("ldmxcsr %0" ::"m" (mxcsr)); -} - -extern unsigned int mxcsr_feature_mask; - -#define XCR_XFEATURE_ENABLED_MASK 0x00000000 - -static inline u64 xgetbv (u32 index) -{ -u32 eax, edx; - - asmvolatile ("xgetbv" :"=a" (eax),"=d" (edx) :"c" (index)); -return eax + ((u64 )edx <<32 ); -} - -static inline void xsetbv (u32 index,u64 value) -{ -u32 eax = value; -u32 edx = value >>32 ; - - asmvolatile ("xsetbv" ::"a" (eax),"d" (edx),"c" (index)); -} -#endif /* _ASM_X86_FPU_INTERNAL_H */
arch/x86/include/asm/fpu/xcr.h new file +34 -0
@@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_FPU_XCR_H +#define _ASM_X86_FPU_XCR_H + +/* +* MXCSR and XCR definitions: +*/ + +static inline void ldmxcsr (u32 mxcsr) +{ + asmvolatile ("ldmxcsr %0" ::"m" (mxcsr)); +} + +extern unsigned int mxcsr_feature_mask; + +#define XCR_XFEATURE_ENABLED_MASK 0x00000000 + +static inline u64 xgetbv (u32 index) +{ +u32 eax, edx; + + asmvolatile ("xgetbv" :"=a" (eax),"=d" (edx) :"c" (index)); +return eax + ((u64 )edx <<32 ); +} + +static inline void xsetbv (u32 index,u64 value) +{ +u32 eax = value; +u32 edx = value >>32 ; + + asmvolatile ("xsetbv" ::"a" (eax),"d" (edx),"c" (index)); +} + +#endif /* _ASM_X86_FPU_XCR_H */
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 27/76 x86/sev-es: Add CPUID handling to #VC handler
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Handle #VC exceptions caused by CPUID instructions. These happen in early boot code when the KASLR code checks for RDTSC.
--- arch/x86/boot/compressed/sev-es.c | 4 ++++ arch/x86/kernel/sev-es-shared.c | 35 +++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+)
arch/x86/boot/compressed/sev-es.c +4 -0
@@ -16,6 +16,7 @@#include <asm/trapnr.h> #include <asm/trap_pf.h> #include <asm/msr-index.h> +#include <asm/fpu/xcr.h> #include <asm/ptrace.h> #include <asm/svm.h>
@@ -183,6 +184,9 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code)case SVM_EXIT_IOIO : result =vc_handle_ioio (boot_ghcb, &ctxt);break ; +case SVM_EXIT_CPUID : + result =vc_handle_cpuid (boot_ghcb, &ctxt); +break ;default : result =ES_UNSUPPORTED ;break ;
arch/x86/kernel/sev-es-shared.c +35 -0
@@ -432,3 +432,38 @@ static enum es_result vc_handle_ioio(struct ghcb *ghcb, struct es_em_ctxt *ctxt)return ret; } + +static enum es_result vc_handle_cpuid (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +struct pt_regs *regs = ctxt->regs; +u32 cr4 =native_read_cr4 (); +enum es_result ret; + +ghcb_set_rax (ghcb, regs->ax); +ghcb_set_rcx (ghcb, regs->cx); + +if (cr4 &X86_CR4_OSXSAVE ) +/* Safe to read xcr0 */ +ghcb_set_xcr0 (ghcb,xgetbv (XCR_XFEATURE_ENABLED_MASK )); +else +/* xgetbv will cause #GP - use reset value for xcr0 */ +ghcb_set_xcr0 (ghcb,1 ); + + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_CPUID ,0 ,0 ); +if (ret !=ES_OK ) +return ret; + +if (!(ghcb_rax_is_valid (ghcb) && +ghcb_rbx_is_valid (ghcb) && +ghcb_rcx_is_valid (ghcb) && +ghcb_rdx_is_valid (ghcb))) +return ES_VMM_ERROR ; + + regs->ax = ghcb->save.rax; + regs->bx = ghcb->save.rbx; + regs->cx = ghcb->save.rcx; + regs->dx = ghcb->save.rdx; + +return ES_OK ; +}
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH v6 27/76] x86/sev-es: Add CPUID handling to #VC handler
Quoted 13 lines · Joerg Roedel
From: Tom Lendacky <[email protected]>
Handle #VC exceptions caused by CPUID instructions. These happen in early boot code when the KASLR code checks for RDTSC.
Signed-off-by Tom Lendacky <[email protected]>[ [email protected]: Adapt to #VC handling framework ]Co-developed-by Joerg Roedel <[email protected]>Signed-off-by Joerg Roedel <[email protected]>---
arch/x86/kernel/sev-es-shared.c +2
-0+ +static enum es_result vc_handle_cpuid(struct ghcb *ghcb,
arch/x86/kernel/sev-es-shared.c static enum es_result vc_handle_ioio(struct ghcb *ghcb, struct es_em_ctxt *ctxt) · line 446
Quoted 10 lines
arch/x86/kernel/sev-es-shared.c +10
-0+ struct es_em_ctxt *ctxt) +{ +struct pt_regs *regs = ctxt->regs; +u32 cr4 =native_read_cr4 (); +enum es_result ret; + +ghcb_set_rax (ghcb, regs->ax); +ghcb_set_rcx (ghcb, regs->cx); + +if (cr4 &X86_CR4_OSXSAVE )
Will this ever happen? trampoline_32bit_src will clear CR4 except for PAE and possibly LA57, no?
Quoted 26 lines
arch/x86/kernel/sev-es-shared.c +23
-0+/* Safe to read xcr0 */ +ghcb_set_xcr0 (ghcb,xgetbv (XCR_XFEATURE_ENABLED_MASK )); + else +/* xgetbv will cause #GP - use reset value for xcr0 */ + ghcb_set_xcr0(ghcb, 1); + + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_CPUID ,0 ,0 ); +if (ret !=ES_OK ) +return ret; + +if (!(ghcb_rax_is_valid (ghcb) && +ghcb_rbx_is_valid (ghcb) && +ghcb_rcx_is_valid (ghcb) && +ghcb_rdx_is_valid (ghcb))) +return ES_VMM_ERROR ; + + regs->ax = ghcb->save.rax; + regs->bx = ghcb->save.rbx; + regs->cx = ghcb->save.rcx; + regs->dx = ghcb->save.rdx; + +return ES_OK ; +}Signature · 1 line
2.28.0
Re: [PATCH v6 27/76] x86/sev-es: Add CPUID handling to #VC handler
Quoted 19 lines · Arvind Sankar
Quoted 18 lines · Joerg Roedel
From: Tom Lendacky <[email protected]>
Handle #VC exceptions caused by CPUID instructions. These happen in early boot code when the KASLR code checks for RDTSC.
Signed-off-by Tom Lendacky <[email protected]>[ [email protected]: Adapt to #VC handling framework ]Co-developed-by Joerg Roedel <[email protected]>Signed-off-by Joerg Roedel <[email protected]>---
arch/x86/kernel/sev-es-shared.c +7
-0+ +static enum es_result vc_handle_cpuid (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +struct pt_regs *regs = ctxt->regs; +u32 cr4 =native_read_cr4 (); +enum es_result ret;
Quoted 8 lines
arch/x86/kernel/sev-es-shared.c static enum es_result vc_handle_ioio(struct ghcb *ghcb, struct es_em_ctxt *ctxt) · line 446
Quoted 5 lines
arch/x86/kernel/sev-es-shared.c +5
-0+ +ghcb_set_rax (ghcb, regs->ax); +ghcb_set_rcx (ghcb, regs->cx); + +if (cr4 &X86_CR4_OSXSAVE )Will this ever happen?
trampoline_32bit_srcwill clear CR4 except for PAE and possibly LA57, no?
This same code is later re-used in the runtime handler and there the check is needed :)
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 28/76 x86/idt: Move IDT to data segment
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
With SEV-ES, exception handling is needed very early, even before the kernel has cleared the bss segment. In order to prevent clearing the currently used IDT, move the IDT to the data segment.
--- arch/x86/kernel/idt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/idt.c +1 -1
@@ -158,7 +158,7 @@ static const __initconst struct idt_data apic_idts[] = { };/* Must be page-aligned because the real IDT is used in the cpu entry area */ -static gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss; +static gate_desc idt_table[IDT_ENTRIES] __page_aligned_data;static struct desc_ptr idt_descr__ro_after_init = { .size =IDT_TABLE_SIZE -1 ,
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 29/76 x86/idt: Split idt_data setup out of set_intr_gate()
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The code to setup idt_data is needed for early exception handling, but set_intr_gate() can't be used that early because it has pv-ops in its code path, which don't work that early.
Split out the idt_data initialization part from set_intr_gate() so that it can be used separatly.
--- arch/x86/kernel/idt.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
arch/x86/kernel/idt.c +14 -8
@@ -205,18 +205,24 @@ idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sy } } +static void init_idt_data (struct idt_data *data,unsigned int n, +const void *addr) +{ +BUG_ON (n >0xFF ); + +memset (data,0 ,sizeof (*data)); + data->vector = n; + data->addr = addr; + data->segment = __KERNEL_CS; + data->bits.type =GATE_INTERRUPT ; + data->bits.p =1 ; +} +static __init void set_intr_gate (unsigned int n,const void *addr) {struct idt_data data; -BUG_ON (n >0xFF ); - -memset (&data,0 ,sizeof (data)); - data.vector = n; - data.addr = addr; - data.segment = __KERNEL_CS; - data.bits.type =GATE_INTERRUPT ; - data.bits.p =1 ; +init_idt_data (&data, n, addr);idt_setup_from_table (idt_table, &data,1 , false); }
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 29/76] x86/idt: Split idt_data setup out of set_intr_gate()
Quoted 8 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
The code to setup
idt_datais needed for early exception handling, butset_intr_gate()can't be used that early because it has pv-ops in its code path, which don't work that early.Split out the
idt_datainitialization part fromset_intr_gate()so that it can be used separatly.
"separately"
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 30/76 x86/head/64: Install startup GDT
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Handling exceptions during boot requires a working GDT. The kernel GDT can't be used on the direct mapping, so load a startup GDT and setup segments.
--- arch/x86/include/asm/setup.h | 1 + arch/x86/kernel/head64.c | 33 +++++++++++++++++++++++++++++++++ arch/x86/kernel/head_64.S | 14 ++++++++++++++ 3 files changed, 48 insertions(+)
arch/x86/include/asm/setup.h +1 -0
@@ -48,6 +48,7 @@ extern void reserve_standard_io_resources(void);extern void i386_reserve_resources (void );extern unsigned long __startup_64 (unsigned long physaddr,struct boot_params *bp);extern unsigned long __startup_secondary_64 (void ); +extern void startup_64_setup_env (unsigned long physbase);extern int early_make_pgtable (unsigned long address);#ifdef CONFIG_X86_INTEL_MID
arch/x86/kernel/head64.c +33 -0
@@ -61,6 +61,24 @@ unsigned long vmemmap_base __ro_after_init = __VMEMMAP_BASE_L4;EXPORT_SYMBOL (vmemmap_base);#endif +/* +* GDT used on the boot CPU before switching to virtual addresses. +*/ +static struct desc_struct startup_gdt[GDT_ENTRIES ] = { + [GDT_ENTRY_KERNEL32_CS ] =GDT_ENTRY_INIT (0xc09b ,0 ,0xfffff ), + [GDT_ENTRY_KERNEL_CS ] =GDT_ENTRY_INIT (0xa09b ,0 ,0xfffff ), + [GDT_ENTRY_KERNEL_DS ] =GDT_ENTRY_INIT (0xc093 ,0 ,0xfffff ), +}; + +/* +* Address needs to be set at runtime because it references the startup_gdt +* while the kernel still uses a direct mapping. +*/ +static struct desc_ptr startup_gdt_descr = { + .size =sizeof (startup_gdt), + .address =0 , +}; +#define __head __section(.head.text) static void __head *fixup_pointer(void *ptr, unsigned long physaddr)
@@ -489,3 +507,18 @@ void __init x86_64_start_reservations(char *real_mode_data)start_kernel (); } + +/* +* Setup boot CPU state needed before kernel switches to virtual addresses. +*/ +void __head startup_64_setup_env(unsigned long physbase) +{ +/* Load GDT */ + startup_gdt_descr.address = (unsigned long )fixup_pointer (startup_gdt, physbase); +native_load_gdt (&startup_gdt_descr); + +/* New GDT is live - reload data segment registers */ + asmvolatile ("movl %%eax, %%ds\n" +"movl %%eax, %%ss\n" +"movl %%eax, %%es\n" : :"a" (__KERNEL_DS) :"memory" ); +}
arch/x86/kernel/head_64.S +14 -0
@@ -73,6 +73,20 @@ SYM_CODE_START_NOALIGN(startup_64) /* Set up the stack for verify_cpu(), similar to initial_stack below */ leaq (__end_init_task - SIZEOF_PTREGS)(%rip), %rsp + leaq _text(%rip), %rdi + pushq %rsi + call startup_64_setup_env + popq %rsi + + /* Now switch to __KERNEL_CS so IRET works reliably */ + pushq $__KERNEL_CS + leaq .Lon_kernel_cs(%rip), %rax + pushq %rax + lretq + +.Lon_kernel_cs: + UNWIND_HINT_EMPTY + /* Sanitize CPU configuration */ call verify_cpu
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 31/76 x86/head/64: Setup MSR_GS_BASE before calling into C code
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
When stack-protector is enabled a valid GS_BASE is needed before calling any C code function, because the stack canary is loaded from per-cpu data.
--- arch/x86/kernel/head64.c | 7 +++++++ arch/x86/kernel/head_64.S | 8 ++++++++ 2 files changed, 15 insertions(+)
arch/x86/kernel/head64.c +7 -0
@@ -36,6 +36,7 @@#include <asm/microcode.h> #include <asm/kasan.h> #include <asm/fixmap.h> +#include <asm/realmode.h> /* * Manage page tables very early on.
@@ -513,6 +514,8 @@ void __init x86_64_start_reservations(char *real_mode_data)*/ void __head startup_64_setup_env(unsigned long physbase) { +unsigned long gsbase; +/* Load GDT */ startup_gdt_descr.address = (unsigned long )fixup_pointer (startup_gdt, physbase);native_load_gdt (&startup_gdt_descr);
@@ -521,4 +524,8 @@ void __head startup_64_setup_env(unsigned long physbase) asmvolatile ("movl %%eax, %%ds\n" "movl %%eax, %%ss\n" "movl %%eax, %%es\n" : :"a" (__KERNEL_DS) :"memory" ); + +/* Setup GS_BASE - needed for stack protector */ + gsbase = (unsigned long )fixup_pointer ((void *)initial_gs, physbase); +__wrmsr (MSR_GS_BASE , (u32 )gsbase, (u32)(gsbase >>32 )); }
arch/x86/kernel/head_64.S +8 -0
@@ -78,6 +78,14 @@ SYM_CODE_START_NOALIGN(startup_64) call startup_64_setup_env popq %rsi + /* + * Setup %gs here already to make stack-protector work - it needs to be + * setup again after the switch to kernel addresses. The address read + * from initial_gs is a kernel address, so it needs to be adjusted first + * for the identity mapping. + */ + movl $MSR_GS_BASE,%ecx + /* Now switch to __KERNEL_CS so IRET works reliably */ pushq $__KERNEL_CS leaq .Lon_kernel_cs(%rip), %rax
Signature · 1 line
2.28.0
Borislav Petkov
maintainerRe: [PATCH v6 31/76] x86/head/64: Setup MSR_GS_BASE before calling into C code
Quoted 5 lines · Joerg Roedel
arch/x86/kernel/head_64.S +0
-0
arch/x86/kernel/head_64.S SYM_CODE_START_NOALIGN(startup_64) · line 87
Quoted 10 lines
arch/x86/kernel/head_64.S +7
-0@@ -78,6 +78,14 @@ SYM_CODE_START_NOALIGN(startup_64) call startup_64_setup_env popq %rsi + /* + * Setup %gs here already to make stack-protector work - it needs to be + * setup again after the switch to kernel addresses. The address read + * from initial_gs is a kernel address, so it needs to be adjusted first + * for the identity mapping. + */ + movl $MSR_GS_BASE,%ecx
I'm confused: is this missing those three lines:
movl initial_gs(%rip),%eax
movl initial_gs+4(%rip),%edx
wrmsras it is done in secondary_startup_64 ?
Or why would you otherwise put 0xc0000101 in %ecx and not do anything with it...
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH v6 31/76] x86/head/64: Setup MSR_GS_BASE before calling into C code
Quoted 10 lines · Borislav Petkov
arch/x86/kernel/head_64.S SYM_CODE_START_NOALIGN(startup_64) · line 87
Quoted 1 line · Joerg Roedel
arch/x86/kernel/head_64.S +1
-0+ movl $MSR_GS_BASE,%ecxI'm confused: is this missing those three lines:
movl initial_gs(%rip),%eax movl initial_gs+4(%rip),%edx wrmsras it is done in
secondary_startup_64?
No, it is a leftover from before I moved the MSR write into startup_64_setup_env(). I removed it, thanks for catching this.
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 32/76 x86/head/64: Load GDT after switch to virtual addresses
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Load the GDT right after switching to virtual addresses to make sure there is a defined GDT for exception handling.
--- arch/x86/kernel/head_64.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
arch/x86/kernel/head_64.S +8 -8
@@ -166,6 +166,14 @@ SYM_CODE_START(secondary_startup_64) 1: UNWIND_HINT_EMPTY + /* + * We must switch to a new descriptor in kernel space for the GDT + * because soon the kernel won't have access anymore to the userspace + * addresses where we're currently running on. We have to do that here + * because in 32bit we couldn't load a 64bit linear address. + */ + lgdt early_gdt_descr(%rip) + /* Check if nx is implemented */ movl $0x80000001, %eax cpuid
@@ -193,14 +201,6 @@ SYM_CODE_START(secondary_startup_64) pushq $0 popfq - /* - * We must switch to a new descriptor in kernel space for the GDT - * because soon the kernel won't have access anymore to the userspace - * addresses where we're currently running on. We have to do that here - * because in 32bit we couldn't load a 64bit linear address. - */ - lgdt early_gdt_descr(%rip) - /* set up data segments */ xorl %eax,%eax movl %eax,%ds
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 33/76 x86/head/64: Load segment registers earlier
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Make sure segments are properly set up before setting up an IDT and doing anything that might cause a #VC exception. This is later needed for early exception handling.
--- arch/x86/kernel/head_64.S | 52 +++++++++++++++++++-------------------- 1 file changed, 26 insertions(+), 26 deletions(-)
arch/x86/kernel/head_64.S +26 -26
@@ -174,6 +174,32 @@ SYM_CODE_START(secondary_startup_64) */ lgdt early_gdt_descr(%rip) + /* set up data segments */ + xorl %eax,%eax + movl %eax,%ds + movl %eax,%ss + movl %eax,%es + + /* + * We don't really need to load %fs or %gs, but load them anyway + * to kill any stale realmode selectors. This allows execution + * under VT hardware. + */ + movl %eax,%fs + movl %eax,%gs + + /* Set up %gs. + * + * The base of %gs always points to fixed_percpu_data. If the + * stack protector canary is enabled, it is located at %gs:40. + * Note that, on SMP, the boot cpu uses init data section until + * the per cpu areas are set up. + */ + movl $MSR_GS_BASE,%ecx + movl initial_gs(%rip),%eax + movl initial_gs+4(%rip),%edx + wrmsr + /* Check if nx is implemented */ movl $0x80000001, %eax cpuid
@@ -201,32 +227,6 @@ SYM_CODE_START(secondary_startup_64) pushq $0 popfq - /* set up data segments */ - xorl %eax,%eax - movl %eax,%ds - movl %eax,%ss - movl %eax,%es - - /* - * We don't really need to load %fs or %gs, but load them anyway - * to kill any stale realmode selectors. This allows execution - * under VT hardware. - */ - movl %eax,%fs - movl %eax,%gs - - /* Set up %gs. - * - * The base of %gs always points to fixed_percpu_data. If the - * stack protector canary is enabled, it is located at %gs:40. - * Note that, on SMP, the boot cpu uses init data section until - * the per cpu areas are set up. - */ - movl $MSR_GS_BASE,%ecx - movl initial_gs(%rip),%eax - movl initial_gs+4(%rip),%edx - wrmsr - /* rsi is pointer to real mode structure with interesting info. pass it to C */ movq %rsi, %rdi
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 34/76 x86/head/64: Switch to initial stack earlier
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Make sure there is a stack once the kernel runs from virual addresses. At this stage any secondary CPU which boots will have lost its stack because the kernel switched to a new page-table which does not map the real-mode stack anymore.
This is needed for handling early #VC exceptions caused by instructions like CPUID.
--- arch/x86/kernel/head_64.S | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
arch/x86/kernel/head_64.S +6 -3
@@ -200,6 +200,12 @@ SYM_CODE_START(secondary_startup_64) movl initial_gs+4(%rip),%edx wrmsr + /* + * Setup a boot time stack - Any secondary CPU will have lost its stack + * by now because the cr3-switch above unmaps the real-mode stack + */ + movq initial_stack(%rip), %rsp + /* Check if nx is implemented */ movl $0x80000001, %eax cpuid
@@ -220,9 +226,6 @@ SYM_CODE_START(secondary_startup_64) /* Make changes effective */ movq %rax, %cr0 - /* Setup a boot time stack */ - movq initial_stack(%rip), %rsp - /* zero EFLAGS after setting rsp */ pushq $0 popfq
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 35/76 x86/head/64: Make fixup_pointer() static inline
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Also move it to a header file so that it can be used in the idt code to setup the early IDT.
--- arch/x86/include/asm/setup.h | 10 ++++++++++ arch/x86/kernel/head64.c | 5 ----- 2 files changed, 10 insertions(+), 5 deletions(-)
arch/x86/include/asm/setup.h +10 -0
@@ -74,6 +74,16 @@ static inline void x86_ce4100_early_setup(void) { }extern struct boot_params boot_params;extern char _text[]; +/* +* This function is used in C code that runs while the kernel still runs on +* identity mapped addresses to get the correct address of kernel pointers in +* the identity mapping. +*/ +static __always_inline void *fixup_pointer(void *ptr, unsigned long physaddr) +{ +return ptr - (void *)_text + (void *)physaddr; +} +static inline bool kaslr_enabled (void ) { return IS_ENABLED(CONFIG_RANDOMIZE_MEMORY) &&
arch/x86/kernel/head64.c +0 -5
@@ -82,11 +82,6 @@ static struct desc_ptr startup_gdt_descr = {#define __head __section(.head.text) -static void __head *fixup_pointer(void *ptr, unsigned long physaddr) -{ -return ptr - (void *)_text + (void *)physaddr; -} -static unsigned long __head *fixup_long (void *ptr,unsigned long physaddr) {return fixup_pointer (ptr, physaddr);
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 36/76 x86/head/64: Load IDT earlier
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Load the IDT right after switching to virtual addresses in head_64.S so that the kernel can handle #VC exceptions.
--- arch/x86/include/asm/setup.h | 3 +++ arch/x86/kernel/head64.c | 3 +++ arch/x86/kernel/head_64.S | 5 +++++ arch/x86/kernel/idt.c | 23 +++++++++++++++++++++++ 4 files changed, 34 insertions(+)
arch/x86/include/asm/setup.h +3 -0
@@ -50,6 +50,8 @@ extern unsigned long __startup_64(unsigned long physaddr, struct boot_params *bpextern unsigned long __startup_secondary_64 (void );extern void startup_64_setup_env (unsigned long physbase);extern int early_make_pgtable (unsigned long address); +extern void early_idt_setup_early_handler (unsigned long physaddr); +extern void early_load_idt (void );#ifdef CONFIG_X86_INTEL_MID extern void x86_intel_mid_early_setup (void );
@@ -66,6 +68,7 @@ static inline void x86_ce4100_early_setup(void) { }#ifndef _SETUP#include <asm/espfix.h> +#include <asm/sections.h> #include <linux/kernel.h> /*
arch/x86/kernel/head64.c +3 -0
@@ -286,6 +286,9 @@ unsigned long __head __startup_64(unsigned long physaddr, } } +/* Setup IDT with early handlers */ +early_idt_setup_early_handler (physaddr); +/* * Return the SME encryption mask (if SME is active) to be used as a * modifier for the initial pgdir entry programmed into CR3.
arch/x86/kernel/head_64.S +5 -0
@@ -206,6 +206,11 @@ SYM_CODE_START(secondary_startup_64) */ movq initial_stack(%rip), %rsp + /* Load IDT */ + pushq %rsi + call early_load_idt + popq %rsi + /* Check if nx is implemented */ movl $0x80000001, %eax cpuid
arch/x86/kernel/idt.c +23 -0
@@ -10,6 +10,7 @@#include <asm/proto.h> #include <asm/desc.h> #include <asm/hw_irq.h> +#include <asm/setup.h> struct idt_data {unsigned int vector;
@@ -385,3 +386,25 @@ void __init alloc_intr_gate(unsigned int n, const void *addr)if (!WARN_ON (test_and_set_bit (n, system_vectors)))set_intr_gate (n, addr); } + +void __init early_idt_setup_early_handler (unsigned long physaddr) +{ +gate_desc *idt; +int i; + + idt =fixup_pointer (idt_table, physaddr); + +for (i =0 ; i <NUM_EXCEPTION_VECTORS ; i++) { +struct idt_data data; +gate_desc desc; + +init_idt_data (&data, i, early_idt_handler_array[i]); +idt_init_desc (&desc, &data); +native_write_idt_entry (idt, i, &desc); + } +} + +void early_load_idt (void ) +{ +load_idt (&idt_descr); +}
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 36/76] x86/head/64: Load IDT earlier
arch/x86/kernel/idt.c void __init alloc_intr_gate(unsigned int n, const void *addr) · line 390
Quoted 6 lines · Joerg Roedel
arch/x86/kernel/idt.c +2
-0@@ -385,3 +386,25 @@ void __init alloc_intr_gate(unsigned int n, const void *addr)if (!WARN_ON (test_and_set_bit (n, system_vectors)))set_intr_gate (n, addr); } + +void __init early_idt_setup_early_handler (unsigned long physaddr)
I wonder if you could drop one of the "early"es:
idt_setup_early_handler()
for example looks ok to me. Or
early_setup_idt_handler()
if you wanna have "early" as prefix...
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH v6 36/76] x86/head/64: Load IDT earlier
Quoted 10 lines · Borislav Petkov
arch/x86/kernel/idt.c void __init alloc_intr_gate(unsigned int n, const void *addr) · line 390
Quoted 6 lines · Joerg Roedel
arch/x86/kernel/idt.c +2
-0@@ -385,3 +386,25 @@ void __init alloc_intr_gate(unsigned int n, const void *addr)if (!WARN_ON (test_and_set_bit (n, system_vectors)))set_intr_gate (n, addr); } + +void __init early_idt_setup_early_handler (unsigned long physaddr)I wonder if you could drop one of the "early"es:
Quoted 7 lines
idt_setup_early_handler()for example looks ok to me. Or
early_setup_idt_handler()if you wanna have "early" as prefix...
Yeah, makes sense. I settled with the second version.
Thanks,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 37/76 x86/head/64: Move early exception dispatch to C code
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Move the assembly coded dispatch between page-faults and all other exceptions to C code to make it easier to maintain and extend.
Also change the return-type of early_make_pgtable() to bool and make it static.
--- arch/x86/include/asm/pgtable.h | 2 +- arch/x86/include/asm/setup.h | 4 +++- arch/x86/kernel/head64.c | 19 +++++++++++++++---- arch/x86/kernel/head_64.S | 11 +---------- 4 files changed, 20 insertions(+), 16 deletions(-)
arch/x86/include/asm/pgtable.h +1 -1
@@ -28,7 +28,7 @@#include <asm-generic/pgtable_uffd.h> extern pgd_t early_top_pgt[PTRS_PER_PGD ]; -int __init __early_make_pgtable (unsigned long address,pmdval_t pmd); +bool __init __early_make_pgtable (unsigned long address,pmdval_t pmd);void ptdump_walk_pgd_level (struct seq_file *m,struct mm_struct *mm); void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
arch/x86/include/asm/setup.h +3 -1
@@ -39,6 +39,8 @@ void vsmp_init(void);static inline void vsmp_init (void ) { }#endif +struct pt_regs ; +void setup_bios_corruption_check (void );void early_platform_quirks (void );
@@ -49,9 +51,9 @@ extern void i386_reserve_resources(void);extern unsigned long __startup_64 (unsigned long physaddr,struct boot_params *bp);extern unsigned long __startup_secondary_64 (void );extern void startup_64_setup_env (unsigned long physbase); -extern int early_make_pgtable (unsigned long address);extern void early_idt_setup_early_handler (unsigned long physaddr);extern void early_load_idt (void ); +extern void __init do_early_exception (struct pt_regs *regs,int trapnr);#ifdef CONFIG_X86_INTEL_MID extern void x86_intel_mid_early_setup (void );
arch/x86/kernel/head64.c +15 -4
@@ -37,6 +37,8 @@#include <asm/kasan.h> #include <asm/fixmap.h> #include <asm/realmode.h> +#include <asm/extable.h> +#include <asm/trapnr.h> /* * Manage page tables very early on.
@@ -314,7 +316,7 @@ static void __init reset_early_page_tables(void) }/* Create a new PMD entry */ -int __init __early_make_pgtable (unsigned long address,pmdval_t pmd) +bool __init __early_make_pgtable (unsigned long address,pmdval_t pmd) {unsigned long physaddr = address - __PAGE_OFFSET;pgdval_t pgd, *pgd_p;
@@ -324,7 +326,7 @@ int __init __early_make_pgtable(unsigned long address, pmdval_t pmd)/* Invalid address or early pgt is done ? */ if (physaddr >=MAXMEM ||read_cr3_pa () !=__pa_nodebug (early_top_pgt)) -return -1 ; +return false; again: pgd_p = &early_top_pgt[pgd_index (address)].pgd;
@@ -381,10 +383,10 @@ int __init __early_make_pgtable(unsigned long address, pmdval_t pmd) } pmd_p[pmd_index (address)] = pmd; -return 0 ; +return true; } -int __init early_make_pgtable (unsigned long address) +static bool __init early_make_pgtable (unsigned long address) {unsigned long physaddr = address - __PAGE_OFFSET;pmdval_t pmd;
@@ -394,6 +396,15 @@ int __init early_make_pgtable(unsigned long address)return __early_make_pgtable (address, pmd); } +void __init do_early_exception (struct pt_regs *regs,int trapnr) +{ +if (trapnr ==X86_TRAP_PF && +early_make_pgtable (native_read_cr2 ())) +return ; + +early_fixup_exception (regs, trapnr); +} +/* Don't add a printk in there. printk relies on the PDA which is not initialized yet. */ static void __init clear_bss (void )
arch/x86/kernel/head_64.S +1 -10
@@ -349,18 +349,9 @@ SYM_CODE_START_LOCAL(early_idt_handler_common) pushq %r15 /* pt_regs->r15 */ UNWIND_HINT_REGS - cmpq $14,%rsi /* Page fault? */ - jnz 10f - GET_CR2_INTO(%rdi) /* can clobber %rax if pv */ - call early_make_pgtable - andl %eax,%eax - jz 20f /* All good */ - -10: movq %rsp,%rdi /* RDI = pt_regs; RSI is already trapnr */ - call early_fixup_exception + call do_early_exception -20: decl early_recursion_flag(%rip) jmp restore_regs_and_return_to_kernel SYM_CODE_END(early_idt_handler_common)
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 38/76 x86/head/64: Set CR4.FSGSBASE early
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Early exception handling will use rd/wrgsbase in paranoid_entry/exit. Enable the feature to avoid #UD exceptions on boot APs.
--- arch/x86/kernel/head_64.S | 7 +++++++ 1 file changed, 7 insertions(+)
arch/x86/kernel/head_64.S +7 -0
@@ -153,6 +153,13 @@ SYM_CODE_START(secondary_startup_64) orl $X86_CR4_LA57, %ecx 1: #endif + + ALTERNATIVE "jmp .Lstartup_write_cr4", "", X86_FEATURE_FSGSBASE + + /* Early exception handling uses FSGSBASE on APs */ + orl $X86_CR4_FSGSBASE, %ecx + +.Lstartup_write_cr4: movq %rcx, %cr4 /* Setup early boot stage 4-/5-level pagetables. */
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 38/76] x86/head/64: Set CR4.FSGSBASE early
Quoted 16 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
Early exception handling will use rd/wrgsbase in paranoid_entry/exit. Enable the feature to avoid #UD exceptions on boot APs.
Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/kernel/head_64.S | 7 +++++++ 1 file changed, 7 insertions(+)arch/x86/kernel/head_64.S +0
-0
arch/x86/kernel/head_64.S SYM_CODE_START(secondary_startup_64) · line 160
Quoted 8 lines
arch/x86/kernel/head_64.S +5
-0@@ -153,6 +153,13 @@ SYM_CODE_START(secondary_startup_64) orl $X86_CR4_LA57, %ecx 1: #endif + + ALTERNATIVE "jmp .Lstartup_write_cr4", "", X86_FEATURE_FSGSBASE + + /* Early exception handling uses FSGSBASE on APs */ + orl $X86_CR4_FSGSBASE, %ecx
How is this supposed to work?
Alternatives haven't run that early yet and that piece of code looks like this:
ffffffff81000067: eb 06 jmp ffffffff8100006f <secondary_startup_64+0x1f> ffffffff81000069: 81 c9 00 00 01 00 or $0x10000,%ecx ffffffff8100006f: 0f 22 e1 mov %rcx,%cr4
so we'll never set X86_CR4_FSGSBASE during early boot.
Stopping a guest with gdb just before that shows the same thing:
Dump of assembler code from 0x1000069 to 0x100007b:
=> 0x0000000001000069: eb 06 jmp 0x1000071 0x000000000100006b: 81 c9 00 00 01 00 or $0x10000,%ecx 0x0000000001000071: 0f 22 e1 mov %rcx,%cr4 0x0000000001000074: 48 03 05 95 ff 20 01 add 0x120ff95(%rip),%rax # 0x2210010
the unconditional JMP is there and it hasn't been patched out yet.
If you really need to test CPUID flags, you need to do something similar to what verify_cpu does that early. And looking at that thing:
* verify_cpu, returns the status of longmode and SSE in register %eax.
* 0: Success 1: Failure
you could return the FSGSBASE CPUID bit there too and act accordingly.
Hmm.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH v6 38/76] x86/head/64: Set CR4.FSGSBASE early
Quoted 28 lines · Borislav Petkov
Quoted 16 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
Early exception handling will use rd/wrgsbase in paranoid_entry/exit. Enable the feature to avoid #UD exceptions on boot APs.
Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/kernel/head_64.S | 7 +++++++ 1 file changed, 7 insertions(+)arch/x86/kernel/head_64.S +0
-0arch/x86/kernel/head_64.S SYM_CODE_START(secondary_startup_64) · line 160
Quoted 8 lines
arch/x86/kernel/head_64.S +5
-0@@ -153,6 +153,13 @@ SYM_CODE_START(secondary_startup_64) orl $X86_CR4_LA57, %ecx 1: #endif + + ALTERNATIVE "jmp .Lstartup_write_cr4", "", X86_FEATURE_FSGSBASE + + /* Early exception handling uses FSGSBASE on APs */ + orl $X86_CR4_FSGSBASE, %ecxHow is this supposed to work?
Quoted 8 lines
Alternatives haven't run that early yet and that piece of code looks like this:
ffffffff81000067: eb 06 jmp ffffffff8100006f <secondary_startup_64+0x1f> ffffffff81000069: 81 c9 00 00 01 00 or $0x10000,%ecx ffffffff8100006f: 0f 22 e1 mov %rcx,%cr4so we'll never set
X86_CR4_FSGSBASEduring early boot.
This is not needed on the boot CPU, but only on secondary CPUs. When those are brought up the alternatives have been patches already. The commit message should probably be more clear about that, I will fix that.
The CR4 bit also can't be set unconditionally here on the boot CPU, because at that point the kernel does not know whether the CPU has support for the fsgsbase instructions.
Regards,
Joerg
Borislav Petkov
maintainerRe: [PATCH v6 38/76] x86/head/64: Set CR4.FSGSBASE early
Quoted 4 lines · Joerg Roedel
This is not needed on the boot CPU, but only on secondary CPUs. When those are brought up the alternatives have been patches already. The commit message should probably be more clear about that, I will fix that.
Hell yeah - you need to talk more in those commit messages sir! See, we're not in your head... :-)))
And pls put that as a comment over the code - the commit message will not be that easily accessible in years.
Thx.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 39/76 x86/sev-es: Add SEV-ES Feature Detection
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add the sev_es_active function for checking whether SEV-ES is enabled. Also cache the value of MSR_AMD64_SEV at boot to speed up the feature checking in the running code.
--- arch/x86/include/asm/mem_encrypt.h | 3 +++ arch/x86/include/asm/msr-index.h | 2 ++ arch/x86/mm/mem_encrypt.c | 9 ++++++++- arch/x86/mm/mem_encrypt_identity.c | 3 +++ 4 files changed, 16 insertions(+), 1 deletion(-)
arch/x86/include/asm/mem_encrypt.h +3 -0
@@ -19,6 +19,7 @@#ifdef CONFIG_AMD_MEM_ENCRYPT extern u64 sme_me_mask; +extern u64 sev_status;extern bool sev_enabled; void sme_encrypt_execute(unsigned long encrypted_kernel_vaddr,
@@ -50,6 +51,7 @@ void __init mem_encrypt_init(void);bool sme_active (void );bool sev_active (void ); +bool sev_es_active (void );#define __bss_decrypted __attribute__((__section__(".bss..decrypted")))
@@ -72,6 +74,7 @@ static inline void __init sme_enable(struct boot_params *bp) { }static inline bool sme_active (void ) {return false; }static inline bool sev_active (void ) {return false; } +static inline bool sev_es_active (void ) {return false; }static inline int __init early_set_memory_decrypted (unsigned long vaddr,unsigned long size) {return 0 ; }
arch/x86/include/asm/msr-index.h +2 -0
@@ -469,7 +469,9 @@#define MSR_AMD64_SEV_ES_GHCB 0xc0010130#define MSR_AMD64_SEV 0xc0010131#define MSR_AMD64_SEV_ENABLED_BIT 0 +#define MSR_AMD64_SEV_ES_ENABLED_BIT 1#define MSR_AMD64_SEV_ENABLED BIT_ULL(MSR_AMD64_SEV_ENABLED_BIT) +#define MSR_AMD64_SEV_ES_ENABLED BIT_ULL(MSR_AMD64_SEV_ES_ENABLED_BIT)#define MSR_AMD64_VIRT_SPEC_CTRL 0xc001011f
arch/x86/mm/mem_encrypt.c +8 -1
@@ -38,6 +38,7 @@* section is later cleared. */ u64 sme_me_mask __section(.data) = 0; +u64 sev_status __section(.data) = 0;EXPORT_SYMBOL (sme_me_mask);DEFINE_STATIC_KEY_FALSE (sev_enable_key);EXPORT_SYMBOL_GPL (sev_enable_key);
@@ -347,7 +348,13 @@ bool sme_active(void)bool sev_active (void ) { -return sme_me_mask && sev_enabled; +return !!(sev_status &MSR_AMD64_SEV_ENABLED ); +} + +/* Needs to be called from non-instrumentable code */ +bool noinstr sev_es_active(void) +{ +return !!(sev_status &MSR_AMD64_SEV_ES_ENABLED ); }/* Override for DMA direct allocation check - ARCH_HAS_FORCE_DMA_UNENCRYPTED */
arch/x86/mm/mem_encrypt_identity.c +3 -0
@@ -540,6 +540,9 @@ void __init sme_enable(struct boot_params *bp)if (!(msr &MSR_AMD64_SEV_ENABLED ))return ; +/* Save SEV_STATUS to avoid reading MSR again */ + sev_status = msr; +/* SEV state cannot be controlled by a command line option */ sme_me_mask = me_mask; sev_enabled = true;
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 39/76] x86/sev-es: Add SEV-ES Feature Detection
arch/x86/mm/mem_encrypt.c bool sme_active(void) · line 357
Quoted 4 lines · Joerg Roedel
arch/x86/mm/mem_encrypt.c +4
-0+/* Needs to be called from non-instrumentable code */ +bool noinstr sev_es_active(void) +{ +return !!(sev_status &MSR_AMD64_SEV_ES_ENABLED );
You don't need the "!!" since you're returning bool.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 40/76 x86/sev-es: Print SEV-ES info into kernel log
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Refactor the message printed to the kernel log which indicates whether SEV or SME is active to print a list of enabled encryption features. This will scale better in the future when more memory encryption features might be added. Also add SEV-ES to the list of features.
--- arch/x86/mm/mem_encrypt.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-)
arch/x86/mm/mem_encrypt.c +26 -3
@@ -407,6 +407,31 @@ void __init mem_encrypt_free_decrypted_mem(void)free_init_pages ("unused decrypted" , vaddr, vaddr_end); } +static void print_mem_encrypt_feature_info (void ) +{ +pr_info ("AMD Memory Encryption Features active:" ); + +/* Secure Memory Encryption */ +if (sme_active ()) { +/* +* SME is mutually exclusive with any of the SEV +* features below. +*/ +pr_cont (" SME\n" ); +return ; + } + +/* Secure Encrypted Virtualization */ +if (sev_active ()) +pr_cont (" SEV" ); + +/* Encrypted Register State */ +if (sev_es_active ()) +pr_cont (" SEV-ES" ); + +pr_cont ("\n" ); +} +/* Architecture __weak replacement functions */ void __init mem_encrypt_init (void ) {
@@ -422,8 +447,6 @@ void __init mem_encrypt_init(void)if (sev_active ())static_branch_enable (&sev_enable_key); -pr_info ("AMD %s active\n" , -sev_active () ?"Secure Encrypted Virtualization (SEV)" - :"Secure Memory Encryption (SME)" ); +print_mem_encrypt_feature_info (); }
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 41/76 x86/sev-es: Compile early handler code into kernel image
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Setup sev-es.c and include the code from the pre-decompression stage to also build it into the image of the running kernel. Temporarily add __maybe_unused annotations to avoid build warnings until the functions get used.
--- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/sev-es-shared.c | 21 ++-- arch/x86/kernel/sev-es.c | 163 ++++++++++++++++++++++++++++++++ 3 files changed, 175 insertions(+), 10 deletions(-) create mode 100644 arch/x86/kernel/sev-es.c
arch/x86/kernel/Makefile +1 -0
@@ -145,6 +145,7 @@ obj-$(CONFIG_UNWINDER_ORC) += unwind_orc.o obj-$(CONFIG_UNWINDER_FRAME_POINTER) += unwind_frame.o obj-$(CONFIG_UNWINDER_GUESS) += unwind_guess.o +obj-$(CONFIG_AMD_MEM_ENCRYPT) += sev-es.o ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y)
arch/x86/kernel/sev-es-shared.c +11 -10
@@ -9,7 +9,7 @@* and is included directly into both code-bases. */ -static void sev_es_terminate (unsigned int reason) +static void __maybe_unused sev_es_terminate (unsigned int reason) {u64 val =GHCB_SEV_TERMINATE ;
@@ -27,7 +27,7 @@ static void sev_es_terminate(unsigned int reason) asmvolatile ("hlt\n" : : :"memory" ); } -static bool sev_es_negotiate_protocol (void ) +static bool __maybe_unused sev_es_negotiate_protocol (void ) {u64 val;
@@ -46,7 +46,7 @@ static bool sev_es_negotiate_protocol(void)return true; } -static void vc_ghcb_invalidate (struct ghcb *ghcb) +static void __maybe_unused vc_ghcb_invalidate (struct ghcb *ghcb) {memset (ghcb->save.valid_bitmap,0 ,sizeof (ghcb->save.valid_bitmap)); }
@@ -58,9 +58,9 @@ static bool vc_decoding_needed(unsigned long exit_code) exit_code <= SVM_EXIT_LAST_EXCP); } -static enum es_result vc_init_em_ctxt (struct es_em_ctxt *ctxt, -struct pt_regs *regs, -unsigned long exit_code) +static enum es_result __maybe_unused vc_init_em_ctxt (struct es_em_ctxt *ctxt, +struct pt_regs *regs, +unsigned long exit_code) {enum es_result ret =ES_OK ;
@@ -73,7 +73,7 @@ static enum es_result vc_init_em_ctxt(struct es_em_ctxt *ctxt,return ret; } -static void vc_finish_insn (struct es_em_ctxt *ctxt) +static void __maybe_unused vc_finish_insn (struct es_em_ctxt *ctxt) { ctxt->regs->ip += ctxt->insn.length; }
@@ -325,7 +325,8 @@ static enum es_result vc_ioio_exitinfo(struct es_em_ctxt *ctxt, u64 *exitinfo)return ES_OK ; } -static enum es_result vc_handle_ioio (struct ghcb *ghcb,struct es_em_ctxt *ctxt) +static enum es_result __maybe_unused +vc_handle_ioio (struct ghcb *ghcb,struct es_em_ctxt *ctxt) {struct pt_regs *regs = ctxt->regs;u64 exit_info_1, exit_info_2;
@@ -433,8 +434,8 @@ static enum es_result vc_handle_ioio(struct ghcb *ghcb, struct es_em_ctxt *ctxt)return ret; } -static enum es_result vc_handle_cpuid (struct ghcb *ghcb, -struct es_em_ctxt *ctxt) +static enum es_result __maybe_unused vc_handle_cpuid (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) {struct pt_regs *regs = ctxt->regs;u32 cr4 =native_read_cr4 ();
arch/x86/kernel/sev-es.c new file +163 -0
163 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 42/76 x86/sev-es: Setup early #VC handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Setup an early handler for #VC exceptions. There is no GHCB mapped yet, so just re-use the vc_no_ghcb_handler. It can only handle CPUID exit-codes, but that should be enough to get the kernel through verify_cpu() and __startup_64() until it runs on virtual addresses.
--- arch/x86/include/asm/setup.h | 1 + arch/x86/include/asm/sev-es.h | 3 +++ arch/x86/kernel/head64.c | 1 + arch/x86/kernel/head_64.S | 34 +++++++++++++++++++++++++++++++++ arch/x86/kernel/idt.c | 36 +++++++++++++++++++++++++++++++++++ 5 files changed, 75 insertions(+)
arch/x86/include/asm/setup.h +1 -0
@@ -53,6 +53,7 @@ extern unsigned long __startup_secondary_64(void);extern void startup_64_setup_env (unsigned long physbase);extern void early_idt_setup_early_handler (unsigned long physaddr);extern void early_load_idt (void ); +extern void early_idt_setup (unsigned long physbase);extern void __init do_early_exception (struct pt_regs *regs,int trapnr);#ifdef CONFIG_X86_INTEL_MID
arch/x86/include/asm/sev-es.h +3 -0
@@ -73,4 +73,7 @@ static inline u64 lower_bits(u64 val, unsigned int bits) return (val & mask); } +/* Early IDT entry points for #VC handler */ +extern void vc_no_ghcb (void ); +#endif
arch/x86/kernel/head64.c +1 -0
@@ -39,6 +39,7 @@#include <asm/realmode.h> #include <asm/extable.h> #include <asm/trapnr.h> +#include <asm/sev-es.h> /* * Manage page tables very early on.
arch/x86/kernel/head_64.S +34 -0
@@ -95,6 +95,13 @@ SYM_CODE_START_NOALIGN(startup_64) .Lon_kernel_cs: UNWIND_HINT_EMPTY + /* Setup IDT - Needed for SEV-ES */ + pushq %rsi + /* early_idt_setup - physbase as first parameter */ + leaq _text(%rip), %rdi + call early_idt_setup + popq %rsi + /* Sanitize CPU configuration */ call verify_cpu
@@ -363,6 +370,33 @@ SYM_CODE_START_LOCAL(early_idt_handler_common) jmp restore_regs_and_return_to_kernel SYM_CODE_END(early_idt_handler_common) +#ifdef CONFIG_AMD_MEM_ENCRYPT +/* + * VC Exception handler used during very early boot. The + * early_idt_handler_array can't be used because it returns via the + * paravirtualized INTERRUPT_RETURN and pv-ops don't work that early. + */ +SYM_CODE_START_NOALIGN(vc_no_ghcb) + UNWIND_HINT_IRET_REGS offset=8 + + /* Build pt_regs */ + PUSH_AND_CLEAR_REGS + + /* Call C handler */ + movq %rsp, %rdi + movq ORIG_RAX(%rsp), %rsi + call do_vc_no_ghcb + + /* Unwind pt_regs */ + POP_REGS + + /* Remove Error Code */ + addq $8, %rsp + + /* Pure iret required here - don't use INTERRUPT_RETURN */ + iretq +SYM_CODE_END(vc_no_ghcb) +#endif #define SYM_DATA_START_PAGE_ALIGNED(name) \ SYM_START(name, SYM_L_GLOBAL, .balign PAGE_SIZE)
arch/x86/kernel/idt.c +36 -0
@@ -11,6 +11,7 @@#include <asm/desc.h> #include <asm/hw_irq.h> #include <asm/setup.h> +#include <asm/sev-es.h> struct idt_data {unsigned int vector;
@@ -408,3 +409,38 @@ void early_load_idt(void) {load_idt (&idt_descr); } + +#ifdef CONFIG_AMD_MEM_ENCRYPT +static void set_early_idt_handler (gate_desc *idt,int n,void *handler) +{ +struct idt_data data; +gate_desc desc; + +init_idt_data (&data, n, handler); +idt_init_desc (&desc, &data); +native_write_idt_entry (idt, n, &desc); +} +#endif + +static struct desc_ptr early_idt_descr__initdata = { + .size =IDT_TABLE_SIZE -1 , + .address =0 /* Needs physical address of idt_table - initialized at runtime. */ , +}; + +void __init early_idt_setup (unsigned long physbase) +{ +void __maybe_unused *handler; +gate_desc *idt; + + idt =fixup_pointer (idt_table, physbase); + +#ifdef CONFIG_AMD_MEM_ENCRYPT +/* VMM Communication Exception */ + handler =fixup_pointer (vc_no_ghcb, physbase); +set_early_idt_handler (idt,X86_TRAP_VC , handler); +#endif + +/* Initialize IDT descriptor and load IDT */ + early_idt_descr.address = (unsigned long )idt; +native_load_idt (&early_idt_descr); +}
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 42/76] x86/sev-es: Setup early #VC handler
Quoted 18 lines · Joerg Roedel
arch/x86/kernel/idt.c +18
-0+#ifdef CONFIG_AMD_MEM_ENCRYPT +static void set_early_idt_handler (gate_desc *idt,int n,void *handler) +{ +struct idt_data data; +gate_desc desc; + +init_idt_data (&data, n, handler); +idt_init_desc (&desc, &data); +native_write_idt_entry (idt, n, &desc); +} +#endif + +static struct desc_ptr early_idt_descr__initdata = { + .size =IDT_TABLE_SIZE -1 , + .address =0 /* Needs physical address of idt_table - initialized at runtime. */ , +}; + +void __init early_idt_setup (unsigned long physbase)
arch/x86/kernel/idt.c void early_load_idt(void) · line 440
Quoted 10 lines
arch/x86/kernel/idt.c +10
-0+{ +void __maybe_unused *handler; +gate_desc *idt; + + idt =fixup_pointer (idt_table, physbase); + +#ifdef CONFIG_AMD_MEM_ENCRYPT +/* VMM Communication Exception */ + handler =fixup_pointer (vc_no_ghcb, physbase); +set_early_idt_handler (idt,X86_TRAP_VC , handler);
This function is used only once AFAICT - you might just as well add its three-lined body here and save yourself the function definition and ifdeffery above...
Quoted 9 lines
arch/x86/kernel/idt.c +6
-0+#endif + +/* Initialize IDT descriptor and load IDT */ + early_idt_descr.address = (unsigned long )idt; +native_load_idt (&early_idt_descr); +}Signature · 1 line
2.28.0
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationRe: [PATCH v6 42/76] x86/sev-es: Setup early #VC handler
Quoted 9 lines · Borislav Petkov
arch/x86/kernel/idt.c void early_load_idt(void) · line 440
Quoted 4 lines · Joerg Roedel
arch/x86/kernel/idt.c +4
-0+#ifdef CONFIG_AMD_MEM_ENCRYPT +/* VMM Communication Exception */ + handler =fixup_pointer (vc_no_ghcb, physbase); +set_early_idt_handler (idt,X86_TRAP_VC , handler);This function is used only once AFAICT - you might just as well add its three-lined body here and save yourself the function definition and ifdeffery above...
True, but having a separate function might be handy when support for #VE and #HV is developed. Those might also need to setup their early handlers here, no?
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 42/76] x86/sev-es: Setup early #VC handler
Quoted 3 lines · Joerg Roedel
True, but having a separate function might be handy when support for #VE and #HV is developed. Those might also need to setup their early handlers here, no?
Ok.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH v6 42/76] x86/sev-es: Setup early #VC handler
In reply to Joerg Roedelarch/x86/kernel/head_64.S SYM_CODE_START_LOCAL(early_idt_handler_common) · line 377
Quoted 9 lines
arch/x86/kernel/head_64.S +5
-0@@ -363,6 +370,33 @@ SYM_CODE_START_LOCAL(early_idt_handler_common) jmp restore_regs_and_return_to_kernel SYM_CODE_END(early_idt_handler_common) +#ifdef CONFIG_AMD_MEM_ENCRYPT +/* + * VC Exception handler used during very early boot. The + * early_idt_handler_array can't be used because it returns via the + * paravirtualized INTERRUPT_RETURN and pv-ops don't work that early.
Hello Joerg, Juergen
The commit ae755b5a4548 ("x86/paravirt: Switch iret pvops to ALTERNATIVE") ( https://lore.kernel.org/lkml/[email protected]/ ) had been merged and the paravirt_iret is deferenced based via %rip.
Can INTERRUPT_RETURN still be a problem if early_idt_handler_array is used instead for bringup IDT?
Thanks
Lai
Re: [PATCH v6 42/76] x86/sev-es: Setup early #VC handler
Quoted 12 lines · Lai Jiangshan
arch/x86/kernel/head_64.S SYM_CODE_START_LOCAL(early_idt_handler_common) · line 377
Quoted 9 lines
arch/x86/kernel/head_64.S +5
-0@@ -363,6 +370,33 @@ SYM_CODE_START_LOCAL(early_idt_handler_common) jmp restore_regs_and_return_to_kernel SYM_CODE_END(early_idt_handler_common) +#ifdef CONFIG_AMD_MEM_ENCRYPT +/* + * VC Exception handler used during very early boot. The + * early_idt_handler_array can't be used because it returns via the + * paravirtualized INTERRUPT_RETURN and pv-ops don't work that early.Hello Joerg, Juergen
Quoted 6 lines
The commit
ae755b5a4548("x86/paravirt: Switch iret pvops to ALTERNATIVE") ( https://lore.kernel.org/lkml/[email protected]/ ) had been merged and theparavirt_iretis deferenced based via %rip.Can
INTERRUPT_RETURNstill be a problem ifearly_idt_handler_arrayis used instead for bringup IDT?
Even before my patch the dereferencing was done via %rip.
I vaguely remember having discussed the pvops usage with Joerg when he wrote the SEV support. I'm not sure why pvops shouldn't have worked, but I'm sure its usage makes no sense at all, as long as we don't have SEV support for Xen PV guests.
Juergen
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 43/76 x86/sev-es: Setup GHCB based boot #VC handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add the infrastructure to handle #VC exceptions when the kernel runs on virtual addresses and has a GHCB mapped. This handler will be used until the runtime #VC handler takes over.
--- arch/x86/include/asm/segment.h | 2 +- arch/x86/include/asm/sev-es.h | 1 + arch/x86/kernel/head64.c | 6 ++ arch/x86/kernel/sev-es-shared.c | 14 ++-- arch/x86/kernel/sev-es.c | 116 ++++++++++++++++++++++++++++++++ arch/x86/mm/extable.c | 1 + 6 files changed, 132 insertions(+), 8 deletions(-)
arch/x86/include/asm/segment.h +1 -1
@@ -226,7 +226,7 @@#define NUM_EXCEPTION_VECTORS 32/* Bitmask of exception vectors which push an error code on the stack: */ -#define EXCEPTION_ERRCODE_MASK 0x00027d00 +#define EXCEPTION_ERRCODE_MASK 0x20027d00#define GDT_SIZE (GDT_ENTRIES*8)#define GDT_ENTRY_TLS_ENTRIES 3
arch/x86/include/asm/sev-es.h +1 -0
@@ -75,5 +75,6 @@ static inline u64 lower_bits(u64 val, unsigned int bits)/* Early IDT entry points for #VC handler */ extern void vc_no_ghcb (void ); +extern bool handle_vc_boot_ghcb (struct pt_regs *regs);#endif
arch/x86/kernel/head64.c +6 -0
@@ -403,6 +403,12 @@ void __init do_early_exception(struct pt_regs *regs, int trapnr) early_make_pgtable(native_read_cr2()))return ; +#ifdef CONFIG_AMD_MEM_ENCRYPT +if (trapnr ==X86_TRAP_VC && +handle_vc_boot_ghcb (regs)) +return ; +#endif +early_fixup_exception (regs, trapnr); }
arch/x86/kernel/sev-es-shared.c +7 -7
@@ -9,7 +9,7 @@* and is included directly into both code-bases. */ -static void __maybe_unused sev_es_terminate (unsigned int reason) +static void sev_es_terminate (unsigned int reason) {u64 val =GHCB_SEV_TERMINATE ;
@@ -27,7 +27,7 @@ static void __maybe_unused sev_es_terminate(unsigned int reason) asmvolatile ("hlt\n" : : :"memory" ); } -static bool __maybe_unused sev_es_negotiate_protocol (void ) +static bool sev_es_negotiate_protocol (void ) {u64 val;
@@ -46,7 +46,7 @@ static bool __maybe_unused sev_es_negotiate_protocol(void)return true; } -static void __maybe_unused vc_ghcb_invalidate (struct ghcb *ghcb) +static void vc_ghcb_invalidate (struct ghcb *ghcb) {memset (ghcb->save.valid_bitmap,0 ,sizeof (ghcb->save.valid_bitmap)); }
@@ -58,9 +58,9 @@ static bool vc_decoding_needed(unsigned long exit_code) exit_code <= SVM_EXIT_LAST_EXCP); } -static enum es_result __maybe_unused vc_init_em_ctxt (struct es_em_ctxt *ctxt, -struct pt_regs *regs, -unsigned long exit_code) +static enum es_result vc_init_em_ctxt (struct es_em_ctxt *ctxt, +struct pt_regs *regs, +unsigned long exit_code) {enum es_result ret =ES_OK ;
@@ -73,7 +73,7 @@ static enum es_result __maybe_unused vc_init_em_ctxt(struct es_em_ctxt *ctxt,return ret; } -static void __maybe_unused vc_finish_insn (struct es_em_ctxt *ctxt) +static void vc_finish_insn (struct es_em_ctxt *ctxt) { ctxt->regs->ip += ctxt->insn.length; }
arch/x86/kernel/sev-es.c +116 -0
132 lines not on this page · raw message
arch/x86/mm/extable.c +1 -0
@@ -5,6 +5,7 @@#include <xen/xen.h> #include <asm/fpu/internal.h> +#include <asm/sev-es.h> #include <asm/traps.h> #include <asm/kdebug.h>
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 44/76 x86/sev-es: Setup per-cpu GHCBs for the runtime handler
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
The runtime handler needs a GHCB per CPU. Set them up and map them unencrypted.
--- arch/x86/include/asm/mem_encrypt.h | 2 ++ arch/x86/kernel/sev-es.c | 56 +++++++++++++++++++++++++++++- arch/x86/kernel/traps.c | 3 ++ 3 files changed, 60 insertions(+), 1 deletion(-)
arch/x86/include/asm/mem_encrypt.h +2 -0
@@ -49,6 +49,7 @@ void __init mem_encrypt_free_decrypted_mem(void);/* Architecture __weak replacement functions */ void __init mem_encrypt_init (void ); +void __init sev_es_init_vc_handling (void );bool sme_active (void );bool sev_active (void );bool sev_es_active (void );
@@ -72,6 +73,7 @@ static inline void __init sme_early_init(void) { }static inline void __init sme_encrypt_kernel (struct boot_params *bp) { }static inline void __init sme_enable (struct boot_params *bp) { } +static inline void sev_es_init_vc_handling (void ) { }static inline bool sme_active (void ) {return false; }static inline bool sev_active (void ) {return false; }static inline bool sev_es_active (void ) {return false; }
arch/x86/kernel/sev-es.c +55 -1
75 lines not on this page · raw message
arch/x86/kernel/traps.c +3 -0
@@ -1077,6 +1077,9 @@ void __init trap_init(void)/* Init cpu_entry_area before IST entries are set up */ setup_cpu_entry_areas (); +/* Init GHCB memory pages when running as an SEV-ES guest */ +sev_es_init_vc_handling (); +idt_setup_traps ();/*
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 45/76 x86/sev-es: Allocate and Map IST stack for #VC handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Allocate and map an IST stack and an additional fall-back stack for the #VC handler. The memory for the stacks is allocated only when SEV-ES is active.
The #VC handler needs to use an IST stack because it could be raised from kernel space with unsafe stack, e.g. in the SYSCALL entry path.
Since the #VC exception can be nested, the #VC handler switches back to the interrupted stack when entered from kernel space. If switching back is not possible the fall-back stack is used.
--- arch/x86/include/asm/cpu_entry_area.h | 33 +++++++++++++++++---------- arch/x86/include/asm/page_64_types.h | 1 + arch/x86/kernel/cpu/common.c | 2 ++ arch/x86/kernel/dumpstack_64.c | 8 +++++-- arch/x86/kernel/sev-es.c | 33 +++++++++++++++++++++++++++ 5 files changed, 63 insertions(+), 14 deletions(-)
arch/x86/include/asm/cpu_entry_area.h +21 -12
@@ -11,25 +11,29 @@#ifdef CONFIG_X86_64 /* Macro to enforce the same ordering and stack sizes */ -#define ESTACKS_MEMBERS (guardsize) \ - char DF_stack_guard[guardsize]; \ - char DF_stack[EXCEPTION_STKSZ]; \ - char NMI_stack_guard[guardsize]; \ - char NMI_stack[EXCEPTION_STKSZ]; \ - char DB_stack_guard[guardsize]; \ - char DB_stack[EXCEPTION_STKSZ]; \ - char MCE_stack_guard[guardsize]; \ - char MCE_stack[EXCEPTION_STKSZ]; \ - char IST_top_guard[guardsize]; \ +#define ESTACKS_MEMBERS (guardsize, optional_stack_size) \ + char DF_stack_guard[guardsize]; \ + char DF_stack[EXCEPTION_STKSZ]; \ + char NMI_stack_guard[guardsize]; \ + char NMI_stack[EXCEPTION_STKSZ]; \ + char DB_stack_guard[guardsize]; \ + char DB_stack[EXCEPTION_STKSZ]; \ + char MCE_stack_guard[guardsize]; \ + char MCE_stack[EXCEPTION_STKSZ]; \ + char VC_stack_guard[guardsize]; \ + char VC_stack[optional_stack_size]; \ + char VC2_stack_guard[guardsize]; \ + char VC2_stack[optional_stack_size]; \ + char IST_top_guard[guardsize]; \/* The exception stacks' physical storage. No guard pages required */ struct exception_stacks { - ESTACKS_MEMBERS(0) + ESTACKS_MEMBERS(0, 0) };/* The effective cpu entry area mapping with guard pages. */ struct cea_exception_stacks { - ESTACKS_MEMBERS(PAGE_SIZE) + ESTACKS_MEMBERS(PAGE_SIZE, EXCEPTION_STKSZ) };/*
@@ -40,6 +44,8 @@ enum exception_stack_ordering {ESTACK_NMI ,ESTACK_DB ,ESTACK_MCE , +ESTACK_VC , +ESTACK_VC2 , N_EXCEPTION_STACKS };
@@ -139,4 +145,7 @@ static inline struct entry_stack *cpu_entry_stack(int cpu)#define __this_cpu_ist_top_va (name) \ CEA_ESTACK_TOP(__this_cpu_read(cea_exception_stacks), name) +#define __this_cpu_ist_bot_va (name) \ + CEA_ESTACK_BOT(__this_cpu_read(cea_exception_stacks), name) +#endif
arch/x86/include/asm/page_64_types.h +1 -0
@@ -28,6 +28,7 @@#define IST_INDEX_NMI 1#define IST_INDEX_DB 2#define IST_INDEX_MCE 3 +#define IST_INDEX_VC 4/* * Set __PAGE_OFFSET to the most negative possible address +
arch/x86/kernel/cpu/common.c +2 -0
@@ -1821,6 +1821,8 @@ static inline void tss_setup_ist(struct tss_struct *tss) tss->x86_tss.ist[IST_INDEX_NMI ] =__this_cpu_ist_top_va (NMI ); tss->x86_tss.ist[IST_INDEX_DB ] =__this_cpu_ist_top_va (DB ); tss->x86_tss.ist[IST_INDEX_MCE ] =__this_cpu_ist_top_va (MCE ); +/* Only mapped when SEV-ES is active */ + tss->x86_tss.ist[IST_INDEX_VC] = __this_cpu_ist_top_va(VC); }#else /* CONFIG_X86_64 */
arch/x86/kernel/dumpstack_64.c +6 -2
@@ -24,11 +24,13 @@ static const char * const exception_stack_names[] = { [ ESTACK_NMI ] = "NMI", [ ESTACK_DB ] = "#DB", [ ESTACK_MCE ] = "#MC", + [ ESTACK_VC ] = "#VC", + [ ESTACK_VC2 ] = "#VC2", };const char *stack_type_name (enum stack_type type) { -BUILD_BUG_ON (N_EXCEPTION_STACKS !=4 ); +BUILD_BUG_ON (N_EXCEPTION_STACKS !=6 );if (type ==STACK_TYPE_IRQ )return "IRQ" ;
@@ -79,6 +81,8 @@ struct estack_pages estack_pages[CEA_ESTACK_PAGES] ____cacheline_aligned = {EPAGERANGE (NMI ),EPAGERANGE (DB ),EPAGERANGE (MCE ), +EPAGERANGE (VC ), + EPAGERANGE(VC2), };static bool in_exception_stack (unsigned long *stack,struct stack_info *info)
@@ -88,7 +92,7 @@ static bool in_exception_stack(unsigned long *stack, struct stack_info *info)struct pt_regs *regs;unsigned int k; -BUILD_BUG_ON (N_EXCEPTION_STACKS !=4 ); +BUILD_BUG_ON (N_EXCEPTION_STACKS !=6 ); begin = (unsigned long )__this_cpu_read (cea_exception_stacks);/*
arch/x86/kernel/sev-es.c +33 -0
@@ -17,6 +17,7 @@#include <linux/kernel.h> #include <linux/mm.h> +#include <asm/cpu_entry_area.h> #include <asm/sev-es.h> #include <asm/insn-eval.h> #include <asm/fpu/internal.h>
@@ -37,10 +38,41 @@ static struct ghcb __initdata *boot_ghcb;/* #VC handler runtime per-cpu data */ struct sev_es_runtime_data {struct ghcb ghcb_page; + +/* Physical storage for the per-cpu IST stack of the #VC handler */ +char ist_stack[EXCEPTION_STKSZ ]__aligned(PAGE_SIZE) ; + +/* +* Physical storage for the per-cpu fall-back stack of the #VC handler. +* The fall-back stack is used when it is not safe to switch back to the +* interrupted stack in the #VC entry code. +*/ +char fallback_stack[EXCEPTION_STKSZ ]__aligned(PAGE_SIZE) ; }; static DEFINE_PER_CPU(struct sev_es_runtime_data*, runtime_data); +static void __init sev_es_setup_vc_stacks (int cpu) +{ +struct sev_es_runtime_data *data; +struct cpu_entry_area *cea; +unsigned long vaddr; +phys_addr_t pa; + + data =per_cpu (runtime_data, cpu); + cea =get_cpu_entry_area (cpu); + +/* Map #VC IST stack */ + vaddr =CEA_ESTACK_BOT (&cea->estacks,VC ); + pa =__pa (data->ist_stack); +cea_set_pte ((void *)vaddr, pa,PAGE_KERNEL ); + +/* Map VC fall-back stack */ + vaddr =CEA_ESTACK_BOT (&cea->estacks,VC2 ); + pa =__pa (data->fallback_stack); +cea_set_pte ((void *)vaddr, pa,PAGE_KERNEL ); +} +/* Needed in vc_early_forward_exception */ void do_early_exception (struct pt_regs *regs,int trapnr);
@@ -249,6 +281,7 @@ void __init sev_es_init_vc_handling(void)for_each_possible_cpu (cpu) {sev_es_alloc_runtime_data (cpu);sev_es_init_ghcb (cpu); +sev_es_setup_vc_stacks (cpu); } }
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 45/76] x86/sev-es: Allocate and Map IST stack for #VC handler
Quoted 44 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
Allocate and map an IST stack and an additional fall-back stack for the #VC handler. The memory for the stacks is allocated only when SEV-ES is active.
The #VC handler needs to use an IST stack because it could be raised from kernel space with unsafe stack, e.g. in the SYSCALL entry path.
Since the #VC exception can be nested, the #VC handler switches back to the interrupted stack when entered from kernel space. If switching back is not possible the fall-back stack is used.
Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/include/asm/cpu_entry_area.h | 33 +++++++++++++++++---------- arch/x86/include/asm/page_64_types.h | 1 + arch/x86/kernel/cpu/common.c | 2 ++ arch/x86/kernel/dumpstack_64.c | 8 +++++-- arch/x86/kernel/sev-es.c | 33 +++++++++++++++++++++++++++ 5 files changed, 63 insertions(+), 14 deletions(-)arch/x86/include/asm/cpu_entry_area.h +3
-10@@ -11,25 +11,29 @@#ifdef CONFIG_X86_64 /* Macro to enforce the same ordering and stack sizes */ -#define ESTACKS_MEMBERS (guardsize) \ - char DF_stack_guard[guardsize]; \ - char DF_stack[EXCEPTION_STKSZ]; \ - char NMI_stack_guard[guardsize]; \ - char NMI_stack[EXCEPTION_STKSZ]; \ - char DB_stack_guard[guardsize]; \ - char DB_stack[EXCEPTION_STKSZ]; \ - char MCE_stack_guard[guardsize]; \ - char MCE_stack[EXCEPTION_STKSZ]; \ - char IST_top_guard[guardsize]; \ +#define ESTACKS_MEMBERS (guardsize, optional_stack_size) \ + char DF_stack_guard[guardsize]; \ + char DF_stack[EXCEPTION_STKSZ]; \
arch/x86/include/asm/cpu_entry_area.h line 26
Quoted 10 lines
arch/x86/include/asm/cpu_entry_area.h +10
-0+char NMI_stack_guard[guardsize]; \ +char NMI_stack[EXCEPTION_STKSZ ]; \ +char DB_stack_guard[guardsize]; \ +char DB_stack[EXCEPTION_STKSZ ]; \ +char MCE_stack_guard[guardsize]; \ +char MCE_stack[EXCEPTION_STKSZ ]; \ +char VC_stack_guard[guardsize]; \ +char VC_stack[optional_stack_size]; \ +char VC2_stack_guard[guardsize]; \ +char VC2_stack[optional_stack_size]; \
So the VC* stuff needs to be ifdefferied and enabled only on CONFIG_AMD_MEM_ENCRYPT... here and below.
I had that in my previous review too:
"All those things should be under an CONFIG_AMD_MEM_ENCRYPT ifdeffery."
Quoted 25 lines
arch/x86/include/asm/cpu_entry_area.h +5
-2+char IST_top_guard[guardsize]; \/* The exception stacks' physical storage. No guard pages required */ struct exception_stacks { - ESTACKS_MEMBERS(0) + ESTACKS_MEMBERS(0, 0) };/* The effective cpu entry area mapping with guard pages. */ struct cea_exception_stacks { - ESTACKS_MEMBERS(PAGE_SIZE) + ESTACKS_MEMBERS(PAGE_SIZE, EXCEPTION_STKSZ) };/* @@ -40,6 +44,8 @@ enum exception_stack_ordering {ESTACK_NMI ,ESTACK_DB ,ESTACK_MCE , +ESTACK_VC , +ESTACK_VC2 , N_EXCEPTION_STACKS };
arch/x86/include/asm/cpu_entry_area.h static inline struct entry_stack *cpu_entry_stack(int cpu) · line 148
Quoted 4 lines
arch/x86/include/asm/cpu_entry_area.h +1
-0@@ -139,4 +145,7 @@ static inline struct entry_stack *cpu_entry_stack(int cpu)#define __this_cpu_ist_top_va (name) \ CEA_ESTACK_TOP(__this_cpu_read(cea_exception_stacks), name) +#define __this_cpu_ist_bot_va (name) \
"bottom" please. I was wondering for a bit, what "bot"? And I know it is CEA_ESTACK_BOT but that's not readable.
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationPATCH v6 46/76 x86/sev-es: Adjust #VC IST Stack on entering NMI handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
When an NMI hits in the #VC handler entry code before it switched to another stack, any subsequent #VC exception in the NMI code-path will overwrite the interrupted #VC handlers stack.
Make sure this doesn't happen by explicitly adjusting the #VC IST entry in the NMI handler for the time in can cause #VC exceptions.
--- arch/x86/include/asm/sev-es.h | 19 +++++++++++ arch/x86/kernel/nmi.c | 6 ++++ arch/x86/kernel/sev-es.c | 59 +++++++++++++++++++++++++++++++++++ arch/x86/kernel/traps.c | 2 ++ 4 files changed, 86 insertions(+)
arch/x86/include/asm/sev-es.h +19 -0
@@ -77,4 +77,23 @@ static inline u64 lower_bits(u64 val, unsigned int bits)extern void vc_no_ghcb (void );extern bool handle_vc_boot_ghcb (struct pt_regs *regs); +#ifdef CONFIG_AMD_MEM_ENCRYPT +extern struct static_key_false sev_es_enable_key; +extern void __sev_es_ist_enter (struct pt_regs *regs); +extern void __sev_es_ist_exit (void ); +static __always_inline void sev_es_ist_enter(struct pt_regs *regs) +{ +if (static_branch_unlikely (&sev_es_enable_key)) +__sev_es_ist_enter (regs); +} +static __always_inline void sev_es_ist_exit(void) +{ +if (static_branch_unlikely (&sev_es_enable_key)) +__sev_es_ist_exit (); +} +#else +static inline void sev_es_ist_enter (struct pt_regs *regs) { } +static inline void sev_es_ist_exit (void ) { } +#endif +#endif
arch/x86/kernel/nmi.c +6 -0
@@ -33,6 +33,7 @@#include <asm/reboot.h> #include <asm/cache.h> #include <asm/nospec-branch.h> +#include <asm/sev-es.h> #define CREATE_TRACE_POINTS #include <trace/events/nmi.h>
@@ -488,6 +489,9 @@ DEFINE_IDTENTRY_RAW(exc_nmi)this_cpu_write (nmi_cr2,read_cr2 ()); nmi_restart: +/* Needs to happen before DR7 is accessed */ +sev_es_ist_enter (regs); +this_cpu_write (nmi_dr7,local_db_save ()); irq_state =idtentry_enter_nmi (regs);
@@ -501,6 +505,8 @@ DEFINE_IDTENTRY_RAW(exc_nmi)local_db_restore (this_cpu_read (nmi_dr7)); +sev_es_ist_exit (); +if (unlikely (this_cpu_read (nmi_cr2) !=read_cr2 ()))write_cr2 (this_cpu_read (nmi_cr2));if (this_cpu_dec_return (nmi_state))
arch/x86/kernel/sev-es.c +59 -0
77 lines not on this page · raw message
arch/x86/kernel/traps.c +2 -0
@@ -59,6 +59,7 @@#include <asm/umip.h> #include <asm/insn.h> #include <asm/insn-eval.h> +#include <asm/sev-es.h> #ifdef CONFIG_X86_64 #include <asm/x86_init.h>
@@ -731,6 +732,7 @@ static bool is_sysenter_singlestep(struct pt_regs *regs) static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7) { +/* * Disable breakpoints during exception handling; recursive exceptions * are exceedingly 'fun'.
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 46/76] x86/sev-es: Adjust #VC IST Stack on entering NMI handler
Quoted 13 lines · Joerg Roedel
arch/x86/kernel/nmi.c +1
-0@@ -33,6 +33,7 @@#include <asm/reboot.h> #include <asm/cache.h> #include <asm/nospec-branch.h> +#include <asm/sev-es.h> #define CREATE_TRACE_POINTS #include <trace/events/nmi.h>
arch/x86/kernel/nmi.c DEFINE_IDTENTRY_RAW(exc_nmi) · line 492
Quoted 4 lines
arch/x86/kernel/nmi.c +1
-0@@ -488,6 +489,9 @@ DEFINE_IDTENTRY_RAW(exc_nmi)this_cpu_write (nmi_cr2,read_cr2 ()); nmi_restart: +/* Needs to happen before DR7 is accessed */
... because? Let's explain why.
Quoted 19 lines
arch/x86/kernel/nmi.c +4
-0+sev_es_ist_enter (regs); +this_cpu_write (nmi_dr7,local_db_save ()); irq_state =idtentry_enter_nmi (regs);@@ -501,6 +505,8 @@ DEFINE_IDTENTRY_RAW(exc_nmi)local_db_restore (this_cpu_read (nmi_dr7)); +sev_es_ist_exit (); +if (unlikely (this_cpu_read (nmi_cr2) !=read_cr2 ()))write_cr2 (this_cpu_read (nmi_cr2));if (this_cpu_dec_return (nmi_state))arch/x86/kernel/sev-es.c +0
-0
arch/x86/kernel/sev-es.c struct sev_es_runtime_data { · line 56
Quoted 5 lines
arch/x86/kernel/sev-es.c +2
-0@@ -52,6 +52,9 @@ struct sev_es_runtime_data { static DEFINE_PER_CPU(struct sev_es_runtime_data*, runtime_data); +DEFINE_STATIC_KEY_FALSE (sev_es_enable_key); +EXPORT_SYMBOL_GPL (sev_es_enable_key);
So the GPL export is not needed. The key itself can be made static when you uninline the sev_es_ist_enter/exit accessors as they're called only in nmi.c but I guess Peter would object to that in high-NMI-load perf scenarios...
The export looks unneeded tho.
Quoted 5 lines
arch/x86/kernel/sev-es.c +1
-0+static void __init sev_es_setup_vc_stacks (int cpu) {struct sev_es_runtime_data *data;
arch/x86/kernel/sev-es.c static void __init sev_es_setup_vc_stacks(int cpu) · line 85
Quoted 10 lines
arch/x86/kernel/sev-es.c +7
-0@@ -73,6 +76,59 @@ static void __init sev_es_setup_vc_stacks(int cpu)cea_set_pte ((void *)vaddr, pa,PAGE_KERNEL ); } +static __always_inline bool on_vc_stack(unsigned long sp) +{ +return ((sp >=__this_cpu_ist_bot_va (VC )) && (sp <__this_cpu_ist_top_va (VC ))); +} + +/* +* This function handles the case when an NM is raised in the #VC exception
NMI
arch/x86/kernel/sev-es.c static void __init sev_es_setup_vc_stacks(int cpu) · line 86
Quoted 1 line
arch/x86/kernel/sev-es.c +1
-0+* handler entry code. In this case the IST entry for VC must be adjusted, so
"VC" or "#VC"? Choose one pls.
arch/x86/kernel/sev-es.c static void __init sev_es_setup_vc_stacks(int cpu) · line 91
Quoted 5 lines
arch/x86/kernel/sev-es.c +5
-0+* that any subsequent VC exception will not overwrite the stack contents of the +* interrupted VC handler. +* +* The IST entry is adjusted unconditionally so that it can be also be +* unconditionally back-adjusted in sev_es_ist_exit(). Otherwise a nested
^^^^^^^^^^^^^
"adjusted back"
arch/x86/kernel/sev-es.c static void __init sev_es_setup_vc_stacks(int cpu) · line 92
Quoted 1 line
arch/x86/kernel/sev-es.c +1
-0+* sev_es_ist_exit() call may back-adjust the IST entry too early.
Ditto.
Quoted 8 lines
arch/x86/kernel/sev-es.c +8
-0+*/ +void noinstr __sev_es_ist_enter(struct pt_regs *regs) +{ +unsigned long old_ist, new_ist; +unsigned long *p; + +/* Read old IST entry */ + old_ist =__this_cpu_read (cpu_tss_rw.x86_tss.ist[IST_INDEX_VC ]);
arch/x86/kernel/sev-es.c static void __init sev_es_setup_vc_stacks(int cpu) · line 110
Quoted 10 lines
arch/x86/kernel/sev-es.c +10
-0+ +/* Make room on the IST stack */ +if (on_vc_stack (regs->sp)) + new_ist =ALIGN_DOWN (regs->sp,8 ) -sizeof (old_ist); +else + new_ist = old_ist -sizeof (old_ist); + +/* Store old IST entry */ + p = (unsigned long *)new_ist; + *p = old_ist;
What's wrong with:
*(unsigned long *)new_ist = old_ist;
?
Quoted 9 lines
arch/x86/kernel/sev-es.c +9
-0+ +/* Set new IST entry */ +this_cpu_write (cpu_tss_rw.x86_tss.ist[IST_INDEX_VC ], new_ist); +} + +void noinstr __sev_es_ist_exit(void) +{ +unsigned long ist; +unsigned long *p;
arch/x86/kernel/sev-es.c static void __init sev_es_setup_vc_stacks(int cpu) · line 129
Quoted 10 lines
arch/x86/kernel/sev-es.c +10
-0+ +/* Read IST entry */ + ist =__this_cpu_read (cpu_tss_rw.x86_tss.ist[IST_INDEX_VC ]); + +if (WARN_ON (ist ==__this_cpu_ist_top_va (VC ))) +return ; + +/* Read back old IST entry and write it to the TSS */ + p = (unsigned long *)ist; +this_cpu_write (cpu_tss_rw.x86_tss.ist[IST_INDEX_VC ], *p);
And
this_cpu_write(cpu_tss_rw.x86_tss.ist[IST_INDEX_VC], *(unsigned long *)ist);
?
Quoted 28 lines
arch/x86/kernel/sev-es.c +5
-0+} +/* Needed in vc_early_forward_exception */ void do_early_exception (struct pt_regs *regs,int trapnr);@@ -277,6 +333,9 @@ void __init sev_es_init_vc_handling(void)if (!sev_es_active ())return ; +/* Enable SEV-ES special handling */ +static_branch_enable (&sev_es_enable_key); +/* Initialize per-cpu GHCB pages */ for_each_possible_cpu (cpu) {sev_es_alloc_runtime_data (cpu);arch/x86/kernel/traps.c +1
-0@@ -59,6 +59,7 @@#include <asm/umip.h> #include <asm/insn.h> #include <asm/insn-eval.h> +#include <asm/sev-es.h> #ifdef CONFIG_X86_64 #include <asm/x86_init.h>
arch/x86/kernel/traps.c static bool is_sysenter_singlestep(struct pt_regs *regs) · line 738
Quoted 7 lines
arch/x86/kernel/traps.c +1
-0@@ -731,6 +732,7 @@ static bool is_sysenter_singlestep(struct pt_regs *regs) static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7) { +/* * Disable breakpoints during exception handling; recursive exceptions * are exceedingly 'fun'.
Leftover hunk which got committed my mistake.
Thx.
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationPATCH v6 47/76 x86/dumpstack/64: Add noinstr version of get_stack_info()
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The get_stack_info functionality is needed in the entry code for the #VC exception handler. Provide a version of it in the .text.noinstr section which can be called safely from there.
--- arch/x86/include/asm/stacktrace.h | 2 ++ arch/x86/kernel/dumpstack.c | 7 +++--- arch/x86/kernel/dumpstack_64.c | 39 ++++++++++++++++++------------- arch/x86/mm/cpu_entry_area.c | 3 ++- 4 files changed, 31 insertions(+), 20 deletions(-)
arch/x86/include/asm/stacktrace.h +2 -0
@@ -35,6 +35,8 @@ bool in_entry_stack(unsigned long *stack, struct stack_info *info);int get_stack_info (unsigned long *stack,struct task_struct *task,struct stack_info *info,unsigned long *visit_mask); +bool get_stack_info_noinstr (unsigned long *stack,struct task_struct *task, +struct stack_info *info);const char *stack_type_name (enum stack_type type);
arch/x86/kernel/dumpstack.c +4 -3
@@ -29,8 +29,8 @@ static int die_counter;static struct pt_regs exec_summary_regs; -bool in_task_stack (unsigned long *stack,struct task_struct *task, -struct stack_info *info) +bool noinstr in_task_stack(unsigned long *stack, struct task_struct *task, +struct stack_info *info) {unsigned long *begin =task_stack_page (task);unsigned long *end =task_stack_page (task) +THREAD_SIZE ;
@@ -46,7 +46,8 @@ bool in_task_stack(unsigned long *stack, struct task_struct *task,return true; } -bool in_entry_stack (unsigned long *stack,struct stack_info *info) +/* Called from get_stack_info_noinstr - so must be noinstr too */ +bool noinstr in_entry_stack(unsigned long *stack, struct stack_info *info) {struct entry_stack *ss =cpu_entry_stack (smp_processor_id ());
arch/x86/kernel/dumpstack_64.c +23 -16
@@ -85,7 +85,7 @@ struct estack_pages estack_pages[CEA_ESTACK_PAGES] ____cacheline_aligned = { EPAGERANGE(VC2), }; -static bool in_exception_stack (unsigned long *stack,struct stack_info *info) +static bool __always_inline in_exception_stack(unsigned long *stack, struct stack_info *info) {unsigned long begin, end, stk = (unsigned long )stack;const struct estack_pages *ep;
@@ -126,7 +126,7 @@ static bool in_exception_stack(unsigned long *stack, struct stack_info *info)return true; } -static bool in_irq_stack (unsigned long *stack,struct stack_info *info) +static bool __always_inline in_irq_stack(unsigned long *stack, struct stack_info *info) {unsigned long *end = (unsigned long *)this_cpu_read (hardirq_stack_ptr);unsigned long *begin = end - (IRQ_STACK_SIZE /sizeof (long ));
@@ -151,32 +151,38 @@ static bool in_irq_stack(unsigned long *stack, struct stack_info *info)return true; } -int get_stack_info (unsigned long *stack,struct task_struct *task, -struct stack_info *info,unsigned long *visit_mask) +bool noinstr get_stack_info_noinstr(unsigned long *stack, struct task_struct *task, +struct stack_info *info) { -if (!stack) - goto unknown; - - task = task ? : current; -if (in_task_stack (stack, task, info)) - goto recursion_check; +return true;if (task != current) - goto unknown; +return false;if (in_exception_stack (stack, info)) - goto recursion_check; +return true;if (in_irq_stack (stack, info)) - goto recursion_check; +return true;if (in_entry_stack (stack, info)) - goto recursion_check; +return true; - goto unknown; +return false; +} + +int get_stack_info (unsigned long *stack,struct task_struct *task, +struct stack_info *info,unsigned long *visit_mask) +{ + task = task ? : current; + +if (!stack) + goto unknown; + +if (!get_stack_info_noinstr (stack, task, info)) + goto unknown; -recursion_check:/* * Make sure we don't iterate through any given stack more than once. * If it comes up a second time then there's something wrong going on:
@@ -196,4 +202,5 @@ int get_stack_info(unsigned long *stack, struct task_struct *task, unknown: info->type =STACK_TYPE_UNKNOWN ;return -EINVAL ; + }
arch/x86/mm/cpu_entry_area.c +2 -1
@@ -21,7 +21,8 @@ DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks); DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack);#endif -struct cpu_entry_area *get_cpu_entry_area (int cpu) +/* Is called from entry code, so must be noinstr */ +noinstr struct cpu_entry_area *get_cpu_entry_area(int cpu) {unsigned long va =CPU_ENTRY_AREA_PER_CPU + cpu *CPU_ENTRY_AREA_SIZE ;BUILD_BUG_ON (sizeof (struct cpu_entry_area ) %PAGE_SIZE !=0 );
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 47/76] x86/dumpstack/64: Add noinstr version of get_stack_info()
arch/x86/kernel/dumpstack_64.c struct estack_pages estack_pages[CEA_ESTACK_PAGES] ____cacheline_aligned = { · line 88
Quoted 10 lines · Joerg Roedel
arch/x86/kernel/dumpstack_64.c +1
-1@@ -85,7 +85,7 @@ struct estack_pages estack_pages[CEA_ESTACK_PAGES] ____cacheline_aligned = { EPAGERANGE(VC2), }; -static bool in_exception_stack (unsigned long *stack,struct stack_info *info) +static bool __always_inline in_exception_stack(unsigned long *stack, struct stack_info *info)
Yeah, checkpatch seems to complain correctly here:
ERROR: inline keyword should sit between storage class and type
#88: FILE: arch/x86/kernel/dumpstack_64.c:88:
+static bool __always_inline in_exception_stack(unsigned long *stack, struct stack_info *info)
ERROR: inline keyword should sit between storage class and type
#97: FILE: arch/x86/kernel/dumpstack_64.c:129:
+static bool __always_inline in_irq_stack(unsigned long *stack, struct stack_info *info)
Quoted 16 lines
arch/x86/kernel/dumpstack_64.c +10
-1+int get_stack_info (unsigned long *stack,struct task_struct *task, +struct stack_info *info,unsigned long *visit_mask) +{ + task = task ? : current; + +if (!stack) + goto unknown; + +if (!get_stack_info_noinstr (stack, task, info)) + goto unknown; -recursion_check:/* * Make sure we don't iterate through any given stack more than once. * If it comes up a second time then there's something wrong going on:
arch/x86/kernel/dumpstack_64.c int get_stack_info(unsigned long *stack, struct task_struct *task, · line 205
Quoted 4 lines
arch/x86/kernel/dumpstack_64.c +1
-0@@ -196,4 +202,5 @@ int get_stack_info(unsigned long *stack, struct task_struct *task, unknown: info->type =STACK_TYPE_UNKNOWN ;return -EINVAL ; +
^ Superfluous newline.
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationPATCH v6 48/76 x86/entry/64: Add entry code for #VC handler
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The #VC handler needs special entry code because:
1. It runs on an IST stack
2. It needs to be able to handle nested #VC exceptions
To make this work the entry code is implemented to pretend it doesn't use an IST stack. When entered from user-mode or early SYSCALL entry path it switches to the task stack, if entered from kernel-mode it tries to switch back to the previous stack in the IRET frame.
The stack found in the IRET frame is validated first, and if it is not safe to use it for the #VC handler, the code will switch to a fall-back stack (the #VC2 IST stack). From there it can cause nested exceptions again.
--- arch/x86/entry/entry_64.S | 78 +++++++++++++++++++++++++++++++++ arch/x86/include/asm/idtentry.h | 44 +++++++++++++++++++ arch/x86/include/asm/proto.h | 1 + arch/x86/include/asm/traps.h | 1 + arch/x86/kernel/traps.c | 51 +++++++++++++++++++++ 5 files changed, 175 insertions(+)
arch/x86/entry/entry_64.S +78 -0
@@ -101,6 +101,8 @@ SYM_CODE_START(entry_SYSCALL_64) SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp +SYM_INNER_LABEL(entry_SYSCALL_64_safe_stack, SYM_L_GLOBAL) + /* Construct struct pt_regs on stack */ pushq $__USER_DS /* pt_regs->ss */ pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2) /* pt_regs->sp */
@@ -446,6 +448,82 @@ _ASM_NOKPROBE(\asmsym) SYM_CODE_END(\asmsym) .endm +/** + * idtentry_vc - Macro to generate entry stub for #VC + * @vector: Vector number + * @asmsym: ASM symbol for the entry point + * @cfunc: C function to be called + * + * The macro emits code to set up the kernel context for #VC. The #VC handler + * runs on an IST stack and needs to be able to cause nested #VC exceptions. + * + * To make this work the #VC entry code tries its best to pretend it doesn't use + * an IST stack by switching to the task stack if coming from user-space (which + * includes early SYSCALL entry path) or back to the stack in the IRET frame if + * entered from kernel-mode. + * + * If entered from kernel-mode the return stack is validated first, and if it is + * not safe to use (e.g. because it points to the entry stack) the #VC handler + * will switch to a fall-back stack (VC2) and call a special handler function. + * + * The macro is only used for one vector, but it is planned to extend it in the + * future for the #HV exception. + */ +.macro idtentry_vc vector asmsym cfunc +SYM_CODE_START(\asmsym) + UNWIND_HINT_IRET_REGS + ASM_CLAC + + /* + * If the entry is from userspace, switch stacks and treat it as + * a normal entry. + */ + testb $3, CS-ORIG_RAX(%rsp) + jnz .Lfrom_usermode_switch_stack_\@ + + /* + * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX. + * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS + */ + call paranoid_entry + + UNWIND_HINT_REGS + + /* + * Switch off the IST stack to make it free for nested exceptions. The + * vc_switch_off_ist() function will switch back to the interrupted + * stack if it is safe to do so. If not it switches to the VC fall-back + * stack. + */ + movq %rsp, %rdi /* pt_regs pointer */ + call vc_switch_off_ist + movq %rax, %rsp /* Switch to new stack */ + + UNWIND_HINT_REGS + + /* Update pt_regs */ + movq ORIG_RAX(%rsp), %rsi /* get error code into 2nd argument*/ + movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ + + movq %rsp, %rdi /* pt_regs pointer */ + + call \cfunc + + /* + * No need to switch back to the IST stack. The current stack is either + * identical to the stack in the IRET frame or the VC fall-back stack, + * so it is definitly mapped even with PTI enabled. + */ + jmp paranoid_exit + + /* Switch to the regular task stack */ +.Lfrom_usermode_switch_stack_\@: + idtentry_body safe_stack_\cfunc, has_error_code=1 + +_ASM_NOKPROBE(\asmsym) +SYM_CODE_END(\asmsym) +.endm + /* * Double fault entry. Straight paranoid. No checks from which context * this comes because for the espfix induced #DF this would do the wrong
arch/x86/include/asm/idtentry.h +44 -0
62 lines not on this page · raw message
arch/x86/include/asm/proto.h +1 -0
@@ -10,6 +10,7 @@ void syscall_init(void);#ifdef CONFIG_X86_64 void entry_SYSCALL_64 (void ); +void entry_SYSCALL_64_safe_stack (void );long do_arch_prctl_64 (struct task_struct *task,int option,unsigned long arg2);#endif
arch/x86/include/asm/traps.h +1 -0
@@ -15,6 +15,7 @@ asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs); asmlinkage __visible notracestruct bad_iret_stack *fixup_bad_iret (struct bad_iret_stack *s);void __init trap_init (void ); +asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *eregs);#endif #ifdef CONFIG_X86_F00F_BUG
arch/x86/kernel/traps.c +51 -0
63 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 48/76] x86/entry/64: Add entry code for #VC handler
arch/x86/entry/entry_64.S _ASM_NOKPROBE(\asmsym) · line 450
Quoted 4 lines · Joerg Roedel
arch/x86/entry/entry_64.S +0
-0@@ -446,6 +448,82 @@ _ASM_NOKPROBE(\asmsym) SYM_CODE_END(\asmsym) .endm
ifdeffery pls...
Quoted 9 lines
arch/x86/entry/entry_64.S +9
-0+/** + * idtentry_vc - Macro to generate entry stub for #VC + * @vector: Vector number + * @asmsym: ASM symbol for the entry point + * @cfunc: C function to be called + * + * The macro emits code to set up the kernel context for #VC. The #VC handler + * runs on an IST stack and needs to be able to cause nested #VC exceptions. + *
arch/x86/entry/entry_64.S _ASM_NOKPROBE(\asmsym) · line 469
Quoted 10 lines
arch/x86/entry/entry_64.S +10
-0+ * To make this work the #VC entry code tries its best to pretend it doesn't use + * an IST stack by switching to the task stack if coming from user-space (which + * includes early SYSCALL entry path) or back to the stack in the IRET frame if + * entered from kernel-mode. + * + * If entered from kernel-mode the return stack is validated first, and if it is + * not safe to use (e.g. because it points to the entry stack) the #VC handler + * will switch to a fall-back stack (VC2) and call a special handler function. + * + * The macro is only used for one vector, but it is planned to extend it in the
^^^^^^^^^^^
"... to be extended..."
...
arch/x86/kernel/traps.c asmlinkage __visible noinstr struct pt_regs *sync_regs(struct pt_regs *eregs) · line 683
Quoted 10 lines
arch/x86/kernel/traps.c +6
-0@@ -674,6 +675,56 @@ asmlinkage __visible noinstr struct pt_regs *sync_regs(struct pt_regs *eregs)return regs; } +#ifdef CONFIG_AMD_MEM_ENCRYPT +asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *eregs) +{ +unsigned long sp, *stack; +struct stack_info info; +struct pt_regs *regs;
Let's call those "regs_ret" or so, so that the argument can be "regs" by convention and for better differentiation.
Quoted 15 lines
arch/x86/kernel/traps.c +15
-0+/* +* In the SYSCALL entry path the RSP value comes from user-space - don't +* trust it and switch to the current kernel stack +*/ +if (eregs->ip >= (unsigned long )entry_SYSCALL_64 && + eregs->ip < (unsigned long )entry_SYSCALL_64_safe_stack) { + sp =this_cpu_read (cpu_current_top_of_stack); + goto sync; + } + +/* +* From here on the the RSP value is trusted - more RSP sanity checks +* need to happen above. +* +* Check whether entry happened from a safe stack.
arch/x86/kernel/traps.c asmlinkage __visible noinstr struct pt_regs *sync_regs(struct pt_regs *eregs) · line 709
Quoted 10 lines
arch/x86/kernel/traps.c +10
-0+*/ + sp = eregs->sp; + stack = (unsigned long *)sp; +get_stack_info_noinstr (stack, current, &info); + +/* +* Don't sync to entry stack or other unknown stacks - use the fall-back +* stack instead. +*/ + if (info.type == STACK_TYPE_UNKNOWN || info.type == STACK_TYPE_ENTRY ||
AFAICT, that STACK_TYPE_UNKNOWN gets set only by the plain get_stack_info() function - not by the _noinstr() variant so you'd need to check the return value of latter...
Quoted 22 lines
arch/x86/kernel/traps.c +18
-0+ info.type >= STACK_TYPE_EXCEPTION_LAST) + sp =__this_cpu_ist_top_va (VC2 ); + +sync: +/* +* Found a safe stack - switch to it as if the entry didn't happen via +* IST stack. The code below only copies pt_regs, the real switch happens +* in assembly code. +*/ + sp =ALIGN_DOWN (sp,8 ) -sizeof (*regs); + + regs = (struct pt_regs *)sp; + *regs = *eregs; + +return regs; +} +#endif +struct bad_iret_stack {void *error_entry_ret;struct pt_regs regs;
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationRe: [PATCH v6 48/76] x86/entry/64: Add entry code for #VC handler
Quoted 3 lines · Borislav Petkov
AFAICT, that
STACK_TYPE_UNKNOWNgets set only by the plainget_stack_info()function - not by the_noinstr()variant so you'd need to check the return value of latter...
You are right, it needs to check the return value of get_stack_info_noinstr() instead of STACK_TYPE_UNKNOWN. Fixed that now.
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 48/76] x86/entry/64: Add entry code for #VC handler
In reply to Joerg RoedelQuoted 13 lines · Joerg Roedel
arch/x86/kernel/traps.c +9
-0@@ -674,6 +675,56 @@ asmlinkage __visible noinstr struct pt_regs *sync_regs(struct pt_regs *eregs)return regs; } +#ifdef CONFIG_AMD_MEM_ENCRYPT +asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *eregs) +{ +unsigned long sp, *stack; +struct stack_info info; +struct pt_regs *regs; + +/* +* In the SYSCALL entry path the RSP value comes from user-space - don't
arch/x86/kernel/traps.c asmlinkage __visible noinstr struct pt_regs *sync_regs(struct pt_regs *eregs) · line 696
Quoted 10 lines
arch/x86/kernel/traps.c +10
-0+* trust it and switch to the current kernel stack +*/ +if (eregs->ip >= (unsigned long )entry_SYSCALL_64 && + eregs->ip < (unsigned long )entry_SYSCALL_64_safe_stack) { + sp =this_cpu_read (cpu_current_top_of_stack); + goto sync; + } + +/* +* From here on the the RSP value is trusted - more RSP sanity checks
^^^^^^^
Fished out one valid warning from the confused blabla checkpatch spits out:
WARNING: Possible repeated word: 'the'
#276: FILE: arch/x86/kernel/traps.c:696:
+ * From here on the the RSP value is trusted - more RSP sanity checks
IOW, as I tell other submitters:
Please integrate scripts/checkpatch.pl into your patch creation workflow. Some of the warnings/errors *actually* make sense.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 49/76 x86/sev-es: Add Runtime #VC Exception Handler
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Add the handlers for #VC exceptions invoked at runtime.
--- arch/x86/include/asm/idtentry.h | 6 + arch/x86/kernel/idt.c | 11 +- arch/x86/kernel/sev-es.c | 242 +++++++++++++++++++++++++++++++- 3 files changed, 251 insertions(+), 8 deletions(-)
arch/x86/include/asm/idtentry.h +6 -0
@@ -318,6 +318,7 @@ static __always_inline void __##func(struct pt_regs *regs)*/ #define DECLARE_IDTENTRY_VC (vector, func) \ DECLARE_IDTENTRY_RAW_ERRORCODE(vector, func); \ + __visible noinstr void ist_##func(struct pt_regs *regs, unsigned long error_code); \ __visible noinstr void safe_stack_##func(struct pt_regs *regs, unsigned long error_code)/**
@@ -608,6 +609,11 @@ DECLARE_IDTENTRY_RAW(X86_TRAP_DB, xenpv_exc_debug);/* #DF */ DECLARE_IDTENTRY_DF (X86_TRAP_DF , exc_double_fault); +/* #VC */ +#ifdef CONFIG_AMD_MEM_ENCRYPT +DECLARE_IDTENTRY_VC (X86_TRAP_VC , exc_vmm_communication); +#endif +#ifdef CONFIG_XEN_PV DECLARE_IDTENTRY_XENCB (X86_TRAP_OTHER , exc_xen_hypervisor_callback);#endif
arch/x86/kernel/idt.c +7 -4
@@ -265,11 +265,14 @@ static const __initconst struct idt_data early_pf_idts[] = {* cpu_init() when the TSS has been initialized. */ static const __initconst struct idt_data ist_idts[] = { -ISTG (X86_TRAP_DB , asm_exc_debug,IST_INDEX_DB ), -ISTG (X86_TRAP_NMI , asm_exc_nmi,IST_INDEX_NMI ), -ISTG (X86_TRAP_DF , asm_exc_double_fault,IST_INDEX_DF ), +ISTG (X86_TRAP_DB , asm_exc_debug,IST_INDEX_DB ), +ISTG (X86_TRAP_NMI , asm_exc_nmi,IST_INDEX_NMI ), +ISTG (X86_TRAP_DF , asm_exc_double_fault,IST_INDEX_DF ), #ifdef CONFIG_X86_MCE -ISTG (X86_TRAP_MC , asm_exc_machine_check,IST_INDEX_MCE ), +ISTG (X86_TRAP_MC , asm_exc_machine_check,IST_INDEX_MCE ), +#endif +#ifdef CONFIG_AMD_MEM_ENCRYPT +ISTG (X86_TRAP_VC , asm_exc_vmm_communication,IST_INDEX_VC ), #endif };
arch/x86/kernel/sev-es.c +238 -4
287 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 50/76 x86/sev-es: Wire up existing #VC exit-code handlers
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Re-use the handlers for CPUID and IOIO caused #VC exceptions in the early boot handler.
--- arch/x86/kernel/sev-es-shared.c | 7 +++---- arch/x86/kernel/sev-es.c | 6 ++++++ 2 files changed, 9 insertions(+), 4 deletions(-)
arch/x86/kernel/sev-es-shared.c +3 -4
@@ -325,8 +325,7 @@ static enum es_result vc_ioio_exitinfo(struct es_em_ctxt *ctxt, u64 *exitinfo)return ES_OK ; } -static enum es_result __maybe_unused -vc_handle_ioio (struct ghcb *ghcb,struct es_em_ctxt *ctxt) +static enum es_result vc_handle_ioio (struct ghcb *ghcb,struct es_em_ctxt *ctxt) {struct pt_regs *regs = ctxt->regs;u64 exit_info_1, exit_info_2;
@@ -434,8 +433,8 @@ vc_handle_ioio(struct ghcb *ghcb, struct es_em_ctxt *ctxt)return ret; } -static enum es_result __maybe_unused vc_handle_cpuid (struct ghcb *ghcb, -struct es_em_ctxt *ctxt) +static enum es_result vc_handle_cpuid (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) {struct pt_regs *regs = ctxt->regs;u32 cr4 =native_read_cr4 ();
arch/x86/kernel/sev-es.c +6 -0
@@ -443,6 +443,12 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,enum es_result result;switch (exit_code) { +case SVM_EXIT_CPUID : + result =vc_handle_cpuid (ghcb, ctxt); +break ; +case SVM_EXIT_IOIO : + result =vc_handle_ioio (ghcb, ctxt); +break ;default :/* * Unexpected #VC exception
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 51/76 x86/sev-es: Handle instruction fetches from user-space
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
When a #VC exception is triggered by user-space the instruction decoder needs to read the instruction bytes from user addresses. Enhance vc_decode_insn() to safely fetch kernel and user instructions.
--- arch/x86/kernel/sev-es.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
arch/x86/kernel/sev-es.c +22 -9
@@ -237,17 +237,30 @@ static enum es_result vc_decode_insn(struct es_em_ctxt *ctxt)enum es_result ret;int res; - res =vc_fetch_insn_kernel (ctxt, buffer); -if (unlikely (res == -EFAULT )) { - ctxt->fi.vector =X86_TRAP_PF ; - ctxt->fi.error_code =0 ; - ctxt->fi.cr2 = ctxt->regs->ip; -return ES_EXCEPTION ; +if (user_mode (ctxt->regs)) { + res =insn_fetch_from_user (ctxt->regs, buffer); +if (!res) { + ctxt->fi.vector =X86_TRAP_PF ; + ctxt->fi.error_code =X86_PF_INSTR |X86_PF_USER ; + ctxt->fi.cr2 = ctxt->regs->ip; +return ES_EXCEPTION ; + } + +if (!insn_decode (&ctxt->insn, ctxt->regs, buffer, res)) +return ES_DECODE_FAILED ; + }else { + res =vc_fetch_insn_kernel (ctxt, buffer); +if (res) { + ctxt->fi.vector =X86_TRAP_PF ; + ctxt->fi.error_code =X86_PF_INSTR ; + ctxt->fi.cr2 = ctxt->regs->ip; +return ES_EXCEPTION ; + } + +insn_init (&ctxt->insn, buffer,MAX_INSN_SIZE - res,1 ); +insn_get_length (&ctxt->insn); } -insn_init (&ctxt->insn, buffer,MAX_INSN_SIZE - res,1 ); -insn_get_length (&ctxt->insn); - ret = ctxt->insn.immediate.got ?ES_OK :ES_DECODE_FAILED ;return ret;
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 52/76 x86/sev-es: Handle MMIO events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Add handler for VC exceptions caused by MMIO intercepts. These intercepts come along as nested page faults on pages with reserved bits set.
--- arch/x86/include/uapi/asm/svm.h | 5 + arch/x86/kernel/sev-es.c | 220 ++++++++++++++++++++++++++++++++ 2 files changed, 225 insertions(+)
arch/x86/include/uapi/asm/svm.h +5 -0
@@ -81,6 +81,11 @@#define SVM_EXIT_AVIC_INCOMPLETE_IPI 0x401#define SVM_EXIT_AVIC_UNACCELERATED_ACCESS 0x402 +/* SEV-ES software-defined VMGEXIT events */ +#define SVM_VMGEXIT_MMIO_READ 0x80000001 +#define SVM_VMGEXIT_MMIO_WRITE 0x80000002 +#define SVM_VMGEXIT_UNSUPPORTED_EVENT 0x8000ffff +#define SVM_EXIT_ERR -1#define SVM_EXIT_REASONS \
arch/x86/kernel/sev-es.c +220 -0
238 lines not on this page · raw message
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Borislav Petkov
maintainerRe: [PATCH v6 52/76] x86/sev-es: Handle MMIO events
arch/x86/kernel/sev-es.c static void __init vc_early_forward_exception(struct es_em_ctxt *ctxt) · line 653
Quoted 2 lines · Joerg Roedel
arch/x86/kernel/sev-es.c +2
-0+if (bytes ==4 ) + *reg_data =0 ;/* Zero-extend for 32-bit operation */
Please put all side-comments over the respective line. There are a couple in this patch.
Thx.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 53/76 x86/sev-es: Handle MMIO String Instructions
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add handling for emulation the MOVS instruction on MMIO regions, as done by the memcpy_toio() and memcpy_fromio() functions.
--- arch/x86/kernel/sev-es.c | 77 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)
arch/x86/kernel/sev-es.c +77 -0
@@ -595,6 +595,73 @@ static enum es_result vc_handle_mmio_twobyte_ops(struct ghcb *ghcb,return ret; } +/* +* The MOVS instruction has two memory operands, which raises the +* problem that it is not known whether the access to the source or the +* destination caused the #VC exception (and hence whether an MMIO read +* or write operation needs to be emulated). +* +* Instead of playing games with walking page-tables and trying to guess +* whether the source or destination is an MMIO range, split the move +* into two operations, a read and a write with only one memory operand. +* This will cause a nested #VC exception on the MMIO address which can +* then be handled. +* +* This implementation has the benefit that it also supports MOVS where +* source _and_ destination are MMIO regions. +* +* It will slow MOVS on MMIO down a lot, but in SEV-ES guests it is a +* rare operation. If it turns out to be a performance problem the split +* operations can be moved to memcpy_fromio() and memcpy_toio(). +*/ +static enum es_result vc_handle_mmio_movs (struct es_em_ctxt *ctxt, +unsigned int bytes) +{ +unsigned long ds_base, es_base; +unsigned char *src, *dst; +unsigned char buffer[8 ]; +enum es_result ret; +bool rep; +int off; + + ds_base =insn_get_seg_base (ctxt->regs,INAT_SEG_REG_DS ); + es_base =insn_get_seg_base (ctxt->regs,INAT_SEG_REG_ES ); + +if (ds_base ==-1L || es_base ==-1L ) { + ctxt->fi.vector =X86_TRAP_GP ; + ctxt->fi.error_code =0 ; +return ES_EXCEPTION ; + } + + src = ds_base + (unsigned char *)ctxt->regs->si; + dst = es_base + (unsigned char *)ctxt->regs->di; + + ret =vc_read_mem (ctxt, src, buffer, bytes); +if (ret !=ES_OK ) +return ret; + + ret =vc_write_mem (ctxt, dst, buffer, bytes); +if (ret !=ES_OK ) +return ret; + +if (ctxt->regs->flags &X86_EFLAGS_DF ) + off = -bytes; +else + off = bytes; + + ctxt->regs->si += off; + ctxt->regs->di += off; + + rep =insn_has_rep_prefix (&ctxt->insn); +if (rep) + ctxt->regs->cx -=1 ; + +if (!rep || ctxt->regs->cx ==0 ) +return ES_OK ; +else +return ES_RETRY ; +} +static enum es_result vc_handle_mmio (struct ghcb *ghcb,struct es_em_ctxt *ctxt) {
@@ -655,6 +722,16 @@ static enum es_result vc_handle_mmio(struct ghcb *ghcb,memcpy (reg_data, ghcb->shared_buffer, bytes);break ; +/* MOVS instruction */ +case 0xa4 : + bytes =1 ; + fallthrough; +case 0xa5 : +if (!bytes) + bytes = insn->opnd_bytes; + + ret =vc_handle_mmio_movs (ctxt, bytes); +break ;/* Two-Byte Opcodes */ case 0x0f : ret =vc_handle_mmio_twobyte_ops (ghcb, ctxt);
Signature · 6 lines
2.28.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 54/76 x86/sev-es: Handle MSR events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by RDMSR/WRMSR instructions.
--- arch/x86/kernel/sev-es.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
arch/x86/kernel/sev-es.c +28 -0
@@ -398,6 +398,31 @@ static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,/* Include code shared with pre-decompression boot stage */ #include "sev-es-shared.c" +static enum es_result vc_handle_msr (struct ghcb *ghcb,struct es_em_ctxt *ctxt) +{ +struct pt_regs *regs = ctxt->regs; +enum es_result ret; +u64 exit_info_1; + +/* Is it a WRMSR? */ + exit_info_1 = (ctxt->insn.opcode.bytes[1 ] ==0x30 ) ?1 :0 ; + +ghcb_set_rcx (ghcb, regs->cx); +if (exit_info_1) { +ghcb_set_rax (ghcb, regs->ax); +ghcb_set_rdx (ghcb, regs->dx); + } + + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_MSR , exit_info_1,0 ); + +if ((ret ==ES_OK ) && (!exit_info_1)) { + regs->ax = ghcb->save.rax; + regs->dx = ghcb->save.rdx; + } + +return ret; +} +/* * This function runs on the first #VC exception after the kernel * switched to virtual addresses.
@@ -756,6 +781,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_IOIO : result =vc_handle_ioio (ghcb, ctxt);break ; +case SVM_EXIT_MSR : + result =vc_handle_msr (ghcb, ctxt); +break ;case SVM_EXIT_NPF : result =vc_handle_mmio (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 55/76 x86/sev-es: Handle DR7 read/write events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Add code to handle #VC exceptions on DR7 register reads and writes. This is needed early because show_regs() reads DR7 to print it out.
Under SEV-ES there is currently no support for saving/restoring the DRx registers, but software expects to be able to write to the DR7 register. For now, cache the value written to DR7 and return it on read attempts, but do not touch the real hardware DR7.
[ [email protected]: - Adapt to #VC handling framework
- Support early usage ]
--- arch/x86/kernel/sev-es.c | 85 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)
arch/x86/kernel/sev-es.c +85 -0
@@ -28,6 +28,8 @@#include <asm/traps.h> #include <asm/svm.h> +#define DR7_RESET_VALUE 0x400 +/* For early boot hypervisor communication in SEV-ES enabled guests */ static struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
@@ -75,6 +77,13 @@ struct sev_es_runtime_data {*/ bool ghcb_active;bool backup_ghcb_active; + +/* +* Cached DR7 value - write it on DR7 writes and return it on reads. +* That value will never make it to the real hardware DR7 as debugging +* is currently unsupported in SEV-ES guests. +*/ +unsigned long dr7; };struct ghcb_state {
@@ -521,6 +530,21 @@ static long *vc_insn_get_reg(struct es_em_ctxt *ctxt)return reg_array + offset; } +static long *vc_insn_get_rm (struct es_em_ctxt *ctxt) +{ +long *reg_array; +int offset; + + reg_array = (long *)ctxt->regs; + offset =insn_get_modrm_rm_off (&ctxt->insn, ctxt->regs); + +if (offset <0 ) +return NULL ; + + offset /=sizeof (long ); + +return reg_array + offset; +}static enum es_result vc_do_mmio (struct ghcb *ghcb,struct es_em_ctxt *ctxt,unsigned int bytes,bool read) {
@@ -768,6 +792,61 @@ static enum es_result vc_handle_mmio(struct ghcb *ghcb,return ret; } +static enum es_result vc_handle_dr7_write (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +struct sev_es_runtime_data *data =this_cpu_read (runtime_data); +long val, *reg =vc_insn_get_rm (ctxt); +enum es_result ret; + +if (!reg) +return ES_DECODE_FAILED ; + + val = *reg; + +/* Upper 32 bits must be written as zeroes */ +if (val >>32 ) { + ctxt->fi.vector =X86_TRAP_GP ; + ctxt->fi.error_code =0 ; +return ES_EXCEPTION ; + } + +/* Clear out other reserved bits and set bit 10 */ + val = (val &0xffff23ffL ) |BIT (10 ); + +/* Early non-zero writes to DR7 are not supported */ +if (!data && (val & ~DR7_RESET_VALUE )) +return ES_UNSUPPORTED ; + +/* Using a value of 0 for ExitInfo1 means RAX holds the value */ +ghcb_set_rax (ghcb, val); + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_WRITE_DR7 ,0 ,0 ); +if (ret !=ES_OK ) +return ret; + +if (data) + data->dr7 = val; + +return ES_OK ; +} + +static enum es_result vc_handle_dr7_read (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +struct sev_es_runtime_data *data =this_cpu_read (runtime_data); +long *reg =vc_insn_get_rm (ctxt); + +if (!reg) +return ES_DECODE_FAILED ; + +if (data) + *reg = data->dr7; +else + *reg =DR7_RESET_VALUE ; + +return ES_OK ; +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -775,6 +854,12 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,enum es_result result;switch (exit_code) { +case SVM_EXIT_READ_DR7 : + result =vc_handle_dr7_read (ghcb, ctxt); +break ; +case SVM_EXIT_WRITE_DR7 : + result =vc_handle_dr7_write (ghcb, ctxt); +break ;case SVM_EXIT_CPUID : result =vc_handle_cpuid (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 56/76 x86/sev-es: Handle WBINVD Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by WBINVD instructions.
--- arch/x86/kernel/sev-es.c | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/x86/kernel/sev-es.c +9 -0
@@ -847,6 +847,12 @@ static enum es_result vc_handle_dr7_read(struct ghcb *ghcb,return ES_OK ; } +static enum es_result vc_handle_wbinvd (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +return sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_WBINVD ,0 ,0 ); +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -869,6 +875,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_MSR : result =vc_handle_msr (ghcb, ctxt);break ; +case SVM_EXIT_WBINVD : + result =vc_handle_wbinvd (ghcb, ctxt); +break ;case SVM_EXIT_NPF : result =vc_handle_mmio (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 57/76 x86/sev-es: Handle RDTSC(P) Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by RDTSC and RDTSCP instructions. Also make it available in the pre-decompression stage because the KASLR code used RDTSC/RDTSCP to gather entropy and some hypervisors intercept these instructions.
[ [email protected]: - Adapt to #VC handling infrastructure
- Make it available early ]
--- arch/x86/boot/compressed/sev-es.c | 4 ++++ arch/x86/kernel/sev-es-shared.c | 23 +++++++++++++++++++++++ arch/x86/kernel/sev-es.c | 4 ++++ 3 files changed, 31 insertions(+)
arch/x86/boot/compressed/sev-es.c +4 -0
@@ -181,6 +181,10 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code) goto finish;switch (exit_code) { +case SVM_EXIT_RDTSC : +case SVM_EXIT_RDTSCP : + result =vc_handle_rdtsc (boot_ghcb, &ctxt, exit_code); +break ;case SVM_EXIT_IOIO : result =vc_handle_ioio (boot_ghcb, &ctxt);break ;
arch/x86/kernel/sev-es-shared.c +23 -0
@@ -467,3 +467,26 @@ static enum es_result vc_handle_cpuid(struct ghcb *ghcb,return ES_OK ; } + +static enum es_result vc_handle_rdtsc (struct ghcb *ghcb, +struct es_em_ctxt *ctxt, +unsigned long exit_code) +{ +bool rdtscp = (exit_code ==SVM_EXIT_RDTSCP ); +enum es_result ret; + + ret =sev_es_ghcb_hv_call (ghcb, ctxt, exit_code,0 ,0 ); +if (ret !=ES_OK ) +return ret; + +if (!(ghcb_rax_is_valid (ghcb) &&ghcb_rdx_is_valid (ghcb) && + (!rdtscp ||ghcb_rcx_is_valid (ghcb)))) +return ES_VMM_ERROR ; + + ctxt->regs->ax = ghcb->save.rax; + ctxt->regs->dx = ghcb->save.rdx; +if (rdtscp) + ctxt->regs->cx = ghcb->save.rcx; + +return ES_OK ; +}
arch/x86/kernel/sev-es.c +4 -0
@@ -866,6 +866,10 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_WRITE_DR7 : result =vc_handle_dr7_write (ghcb, ctxt);break ; +case SVM_EXIT_RDTSC : +case SVM_EXIT_RDTSCP : + result =vc_handle_rdtsc (ghcb, ctxt, exit_code); +break ;case SVM_EXIT_CPUID : result =vc_handle_cpuid (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 58/76 x86/sev-es: Handle RDPMC Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by RDPMC instructions.
--- arch/x86/kernel/sev-es.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/x86/kernel/sev-es.c +22 -0
@@ -853,6 +853,25 @@ static enum es_result vc_handle_wbinvd(struct ghcb *ghcb,return sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_WBINVD ,0 ,0 ); } +static enum es_result vc_handle_rdpmc (struct ghcb *ghcb,struct es_em_ctxt *ctxt) +{ +enum es_result ret; + +ghcb_set_rcx (ghcb, ctxt->regs->cx); + + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_RDPMC ,0 ,0 ); +if (ret !=ES_OK ) +return ret; + +if (!(ghcb_rax_is_valid (ghcb) &&ghcb_rdx_is_valid (ghcb))) +return ES_VMM_ERROR ; + + ctxt->regs->ax = ghcb->save.rax; + ctxt->regs->dx = ghcb->save.rdx; + +return ES_OK ; +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -870,6 +889,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_RDTSCP : result =vc_handle_rdtsc (ghcb, ctxt, exit_code);break ; +case SVM_EXIT_RDPMC : + result =vc_handle_rdpmc (ghcb, ctxt); +break ;case SVM_EXIT_CPUID : result =vc_handle_cpuid (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 59/76 x86/sev-es: Handle INVD Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by INVD instructions. Since Linux should never use INVD, just mark it as unsupported.
--- arch/x86/kernel/sev-es.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/x86/kernel/sev-es.c +4 -0
@@ -892,6 +892,10 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_RDPMC : result =vc_handle_rdpmc (ghcb, ctxt);break ; +case SVM_EXIT_INVD : +pr_err_ratelimited ("#VC exception for INVD??? Seriously???\n" ); + result =ES_UNSUPPORTED ; +break ;case SVM_EXIT_CPUID : result =vc_handle_cpuid (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 60/76 x86/sev-es: Handle MONITOR/MONITORX Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by MONITOR and MONITORX instructions.
--- arch/x86/kernel/sev-es.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
arch/x86/kernel/sev-es.c +13 -0
@@ -872,6 +872,16 @@ static enum es_result vc_handle_rdpmc(struct ghcb *ghcb, struct es_em_ctxt *ctxtreturn ES_OK ; } +static enum es_result vc_handle_monitor (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +/* +* Treat it as a NOP and do not leak a physical address to the +* hypervisor +*/ +return ES_OK ; +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -908,6 +918,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_WBINVD : result =vc_handle_wbinvd (ghcb, ctxt);break ; +case SVM_EXIT_MONITOR : + result =vc_handle_monitor (ghcb, ctxt); +break ;case SVM_EXIT_NPF : result =vc_handle_mmio (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 61/76 x86/sev-es: Handle MWAIT/MWAITX Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by MWAIT and MWAITX instructions.
--- arch/x86/kernel/sev-es.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/x86/kernel/sev-es.c +10 -0
@@ -882,6 +882,13 @@ static enum es_result vc_handle_monitor(struct ghcb *ghcb,return ES_OK ; } +static enum es_result vc_handle_mwait (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +/* Treat the same as MONITOR/MONITORX */ +return ES_OK ; +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -921,6 +928,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_MONITOR : result =vc_handle_monitor (ghcb, ctxt);break ; +case SVM_EXIT_MWAIT : + result =vc_handle_mwait (ghcb, ctxt); +break ;case SVM_EXIT_NPF : result =vc_handle_mmio (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 62/76 x86/sev-es: Handle VMMCALL Events
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement a handler for #VC exceptions caused by VMMCALL instructions. This patch is only a starting point, VMMCALL emulation under SEV-ES needs further hypervisor-specific changes to provide additional state.
--- arch/x86/kernel/sev-es.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/x86/kernel/sev-es.c +23 -0
@@ -889,6 +889,26 @@ static enum es_result vc_handle_mwait(struct ghcb *ghcb,return ES_OK ; } +static enum es_result vc_handle_vmmcall (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +enum es_result ret; + +ghcb_set_rax (ghcb, ctxt->regs->ax); +ghcb_set_cpl (ghcb,user_mode (ctxt->regs) ?3 :0 ); + + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_VMMCALL ,0 ,0 ); +if (ret !=ES_OK ) +return ret; + +if (!ghcb_rax_is_valid (ghcb)) +return ES_VMM_ERROR ; + + ctxt->regs->ax = ghcb->save.rax; + +return ES_OK ; +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -922,6 +942,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_MSR : result =vc_handle_msr (ghcb, ctxt);break ; +case SVM_EXIT_VMMCALL : + result =vc_handle_vmmcall (ghcb, ctxt); +break ;case SVM_EXIT_WBINVD : result =vc_handle_wbinvd (ghcb, ctxt);break ;
Signature · 1 line
2.28.0
PATCH v6 63/76 x86/sev-es: Handle #AC Events
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Implement a handler for #VC exceptions caused by #AC exceptions. The #AC exception is just forwarded to do_alignment_check() and not pushed down to the hypervisor, as requested by the SEV-ES GHCB Standardization Specification.
--- arch/x86/kernel/sev-es.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
arch/x86/kernel/sev-es.c +19 -0
@@ -909,6 +909,19 @@ static enum es_result vc_handle_vmmcall(struct ghcb *ghcb,return ES_OK ; } +static enum es_result vc_handle_trap_ac (struct ghcb *ghcb, +struct es_em_ctxt *ctxt) +{ +/* +* Calling ecx_alignment_check() directly does not work, because it +* enables IRQs and the GHCB is active. Forward the exception and call +* it later from vc_forward_exception(). +*/ + ctxt->fi.vector =X86_TRAP_AC ; + ctxt->fi.error_code =0 ; +return ES_EXCEPTION ; +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -922,6 +935,9 @@ static enum es_result vc_handle_exitcode(struct es_em_ctxt *ctxt,case SVM_EXIT_WRITE_DR7 : result =vc_handle_dr7_write (ghcb, ctxt);break ; +case SVM_EXIT_EXCP_BASE +X86_TRAP_AC : + result =vc_handle_trap_ac (ghcb, ctxt); +break ;case SVM_EXIT_RDTSC :case SVM_EXIT_RDTSCP : result =vc_handle_rdtsc (ghcb, ctxt, exit_code);
@@ -981,6 +997,9 @@ static __always_inline void vc_forward_exception(struct es_em_ctxt *ctxt)case X86_TRAP_UD :exc_invalid_op (ctxt->regs);break ; +case X86_TRAP_AC : +exc_alignment_check (ctxt->regs, error_code); +break ;default :pr_emerg ("Unsupported exception in #VC instruction emulation - can't continue\n" );BUG ();
Signature · 1 line
2.28.0
PATCH v6 64/76 x86/sev-es: Handle #DB Events
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Handle #VC exceptions caused by #DB exceptions in the guest. Those must be handled outside of instrumentation_begin()/end() so that the handler will not be raised recursivly.
Handle them by calling the kernels debug exception handler.
--- arch/x86/kernel/sev-es.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/x86/kernel/sev-es.c +17 -0
@@ -922,6 +922,14 @@ static enum es_result vc_handle_trap_ac(struct ghcb *ghcb,return ES_EXCEPTION ; } +static __always_inline void vc_handle_trap_db(struct pt_regs *regs) +{ +if (user_mode (regs)) +noist_exc_debug (regs); +else +exc_debug (regs); +} +static enum es_result vc_handle_exitcode (struct es_em_ctxt *ctxt,struct ghcb *ghcb,unsigned long exit_code)
@@ -1033,6 +1041,15 @@ DEFINE_IDTENTRY_VC_SAFE_STACK(exc_vmm_communication)struct ghcb *ghcb;lockdep_assert_irqs_disabled (); + +/* +* Handle #DB before calling into !noinstr code to avoid recursive #DB. +*/ +if (error_code ==SVM_EXIT_EXCP_BASE +X86_TRAP_DB ) { +vc_handle_trap_db (regs); +return ; + } +instrumentation_begin ();/*
Signature · 1 line
2.28.0
Borislav Petkov
maintainerRe: [PATCH v6 64/76] x86/sev-es: Handle #DB Events
Quoted 5 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
Handle #VC exceptions caused by #DB exceptions in the guest. Those must be handled outside of instrumentation_begin()/end() so that the handler will not be raised recursivly.
^^^^^^^^^^
"recursively"
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationPATCH v6 65/76 x86/paravirt: Allow hypervisor specific VMMCALL handling under SEV-ES
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add two new paravirt callbacks to provide hypervisor specific processor state in the GHCB and to copy state from the hypervisor back to the processor.
--- arch/x86/include/asm/x86_init.h | 16 +++++++++++++++- arch/x86/kernel/sev-es.c | 12 ++++++++++++ 2 files changed, 27 insertions(+), 1 deletion(-)
arch/x86/include/asm/x86_init.h +15 -1
@@ -4,8 +4,10 @@#include <asm/bootparam.h> +struct ghcb ;struct mpc_bus ;struct mpc_cpu ; +struct pt_regs ;struct mpc_table ;struct cpuinfo_x86 ;
@@ -236,10 +238,22 @@ struct x86_legacy_features {/** * struct x86_hyper_runtime - x86 hypervisor specific runtime callbacks * -* @pin_vcpu: pin current vcpu to specified physical cpu (run rarely) +* @pin_vcpu: pin current vcpu to specified physical +* cpu (run rarely) +* @sev_es_hcall_prepare: Load additional hypervisor-specific +* state into the GHCB when doing a VMMCALL under +* SEV-ES. Called from the #VC exception handler. +* @sev_es_hcall_finish: Copies state from the GHCB back into the +* processor (or pt_regs). Also runs checks on the +* state returned from the hypervisor after a +* VMMCALL under SEV-ES. Needs to return 'false' +* if the checks fail. Called from the #VC +* exception handler. */ struct x86_hyper_runtime {void (*pin_vcpu)(int cpu); +void (*sev_es_hcall_prepare)(struct ghcb *ghcb,struct pt_regs *regs); +bool (*sev_es_hcall_finish)(struct ghcb *ghcb,struct pt_regs *regs); };/**
arch/x86/kernel/sev-es.c +12 -0
@@ -897,6 +897,9 @@ static enum es_result vc_handle_vmmcall(struct ghcb *ghcb,ghcb_set_rax (ghcb, ctxt->regs->ax);ghcb_set_cpl (ghcb,user_mode (ctxt->regs) ?3 :0 ); +if (x86_platform.hyper.sev_es_hcall_prepare) + x86_platform.hyper.sev_es_hcall_prepare (ghcb, ctxt->regs); + ret =sev_es_ghcb_hv_call (ghcb, ctxt,SVM_EXIT_VMMCALL ,0 ,0 );if (ret !=ES_OK )return ret;
@@ -906,6 +909,15 @@ static enum es_result vc_handle_vmmcall(struct ghcb *ghcb, ctxt->regs->ax = ghcb->save.rax; +/* +* Call sev_es_hcall_finish() after regs->ax is already set. +* This allows the hypervisor handler to overwrite it again if +* necessary. +*/ +if (x86_platform.hyper.sev_es_hcall_finish && + !x86_platform.hyper.sev_es_hcall_finish (ghcb, ctxt->regs)) +return ES_VMM_ERROR ; +return ES_OK ; }
Signature · 1 line
2.28.0
PATCH v6 66/76 x86/kvm: Add KVM specific VMMCALL handling under SEV-ES
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Implement the callbacks to copy the processor state required by KVM to the GHCB.
[ [email protected]: - Split out of a larger patch
- Adapt to different callback functions ]
--- arch/x86/kernel/kvm.c | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-)
arch/x86/kernel/kvm.c +29 -6
@@ -36,6 +36,8 @@#include <asm/hypervisor.h> #include <asm/tlb.h> #include <asm/cpuidle_haltpoll.h> +#include <asm/ptrace.h> +#include <asm/svm.h> DEFINE_STATIC_KEY_FALSE (kvm_async_pf_enabled);
@@ -746,13 +748,34 @@ static void __init kvm_init_platform(void) x86_platform.apic_post_init = kvm_apic_init; } +#if defined(CONFIG_AMD_MEM_ENCRYPT ) +static void kvm_sev_es_hcall_prepare (struct ghcb *ghcb,struct pt_regs *regs) +{ +/* RAX and CPL are already in the GHCB */ +ghcb_set_rbx (ghcb, regs->bx); +ghcb_set_rcx (ghcb, regs->cx); +ghcb_set_rdx (ghcb, regs->dx); +ghcb_set_rsi (ghcb, regs->si); +} + +static bool kvm_sev_es_hcall_finish (struct ghcb *ghcb,struct pt_regs *regs) +{ +/* No checking of the return state needed */ +return true; +} +#endif +const __initconst struct hypervisor_x86 x86_hyper_kvm = { - .name ="KVM" , - .detect = kvm_detect, - .type =X86_HYPER_KVM , - .init.guest_late_init = kvm_guest_init, - .init.x2apic_available = kvm_para_available, - .init.init_platform = kvm_init_platform, + .name ="KVM" , + .detect = kvm_detect, + .type =X86_HYPER_KVM , + .init.guest_late_init = kvm_guest_init, + .init.x2apic_available = kvm_para_available, + .init.init_platform = kvm_init_platform, +#if defined(CONFIG_AMD_MEM_ENCRYPT) + .runtime.sev_es_hcall_prepare = kvm_sev_es_hcall_prepare, + .runtime.sev_es_hcall_finish = kvm_sev_es_hcall_finish, +#endif };static __init int activate_jump_labels (void )
Signature · 1 line
2.28.0
PATCH v6 67/76 x86/vmware: Add VMware specific handling for VMMCALL under SEV-ES
In reply to Joerg RoedelFrom: Doug Covelli <[email protected]>
Add VMware specific handling for #VC faults caused by VMMCALL instructions.
--- arch/x86/kernel/cpu/vmware.c | 50 ++++++++++++++++++++++++++++++++---- 1 file changed, 45 insertions(+), 5 deletions(-)
arch/x86/kernel/cpu/vmware.c +45 -5
@@ -33,6 +33,7 @@#include <asm/timer.h> #include <asm/apic.h> #include <asm/vmware.h> +#include <asm/svm.h> #undef pr_fmt#define pr_fmt (fmt) "vmware: " fmt
@@ -476,10 +477,49 @@ static bool __init vmware_legacy_x2apic_available(void) (eax & (1 <<VMWARE_CMD_LEGACY_X2APIC )) !=0 ; } +#ifdef CONFIG_AMD_MEM_ENCRYPT +static void vmware_sev_es_hcall_prepare (struct ghcb *ghcb, +struct pt_regs *regs) +{ +/* Copy VMWARE specific Hypercall parameters to the GHCB */ +ghcb_set_rip (ghcb, regs->ip); +ghcb_set_rbx (ghcb, regs->bx); +ghcb_set_rcx (ghcb, regs->cx); +ghcb_set_rdx (ghcb, regs->dx); +ghcb_set_rsi (ghcb, regs->si); +ghcb_set_rdi (ghcb, regs->di); +ghcb_set_rbp (ghcb, regs->bp); +} + +static bool vmware_sev_es_hcall_finish (struct ghcb *ghcb,struct pt_regs *regs) +{ +if (!(ghcb_rbx_is_valid (ghcb) && +ghcb_rcx_is_valid (ghcb) && +ghcb_rdx_is_valid (ghcb) && +ghcb_rsi_is_valid (ghcb) && +ghcb_rdi_is_valid (ghcb) && +ghcb_rbp_is_valid (ghcb))) +return false; + + regs->bx = ghcb->save.rbx; + regs->cx = ghcb->save.rcx; + regs->dx = ghcb->save.rdx; + regs->si = ghcb->save.rsi; + regs->di = ghcb->save.rdi; + regs->bp = ghcb->save.rbp; + +return true; +} +#endif +const __initconst struct hypervisor_x86 x86_hyper_vmware = { - .name ="VMware" , - .detect = vmware_platform, - .type =X86_HYPER_VMWARE , - .init.init_platform = vmware_platform_setup, - .init.x2apic_available = vmware_legacy_x2apic_available, + .name ="VMware" , + .detect = vmware_platform, + .type =X86_HYPER_VMWARE , + .init.init_platform = vmware_platform_setup, + .init.x2apic_available = vmware_legacy_x2apic_available, +#ifdef CONFIG_AMD_MEM_ENCRYPT + .runtime.sev_es_hcall_prepare = vmware_sev_es_hcall_prepare, + .runtime.sev_es_hcall_finish = vmware_sev_es_hcall_finish, +#endif };
Signature · 1 line
2.28.0
PATCH v6 68/76 x86/realmode: Add SEV-ES specific trampoline entry point
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The code at the trampoline entry point is executed in real-mode. In real-mode #VC exceptions can't be handled, so anything that might cause such an exception must be avoided.
In the standard trampoline entry code this is the WBINVD instruction and the call to verify_cpu(), which are both not needed anyway when running as an SEV-ES guest.
--- arch/x86/include/asm/realmode.h | 3 +++ arch/x86/realmode/rm/header.S | 3 +++ arch/x86/realmode/rm/trampoline_64.S | 20 ++++++++++++++++++++ 3 files changed, 26 insertions(+)
arch/x86/include/asm/realmode.h +3 -0
@@ -21,6 +21,9 @@ struct real_mode_header {/* SMP trampoline */ u32 trampoline_start;u32 trampoline_header; +#ifdef CONFIG_AMD_MEM_ENCRYPT +u32 sev_es_trampoline_start; +#endif #ifdef CONFIG_X86_64 u32 trampoline_pgd;#endif
arch/x86/realmode/rm/header.S +3 -0
@@ -20,6 +20,9 @@ SYM_DATA_START(real_mode_header) /* SMP trampoline */ .long pa_trampoline_start .long pa_trampoline_header +#ifdef CONFIG_AMD_MEM_ENCRYPT + .long pa_sev_es_trampoline_start +#endif #ifdef CONFIG_X86_64 .long pa_trampoline_pgd; #endif
arch/x86/realmode/rm/trampoline_64.S +20 -0
@@ -56,6 +56,7 @@ SYM_CODE_START(trampoline_start) testl %eax, %eax # Check for return code jnz no_longmode +.Lswitch_to_protected: /* * GDT tables in non default location kernel can be beyond 16MB and * lgdt will not be able to load the address as in real mode default
@@ -80,6 +81,25 @@ no_longmode: jmp no_longmode SYM_CODE_END(trampoline_start) +#ifdef CONFIG_AMD_MEM_ENCRYPT +/* SEV-ES supports non-zero IP for entry points - no alignment needed */ +SYM_CODE_START(sev_es_trampoline_start) + cli # We should be safe anyway + + LJMPW_RM(1f) +1: + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + mov %ax, %es + mov %ax, %ss + + # Setup stack + movl $rm_stack_end, %esp + + jmp .Lswitch_to_protected +SYM_CODE_END(sev_es_trampoline_start) +#endif /* CONFIG_AMD_MEM_ENCRYPT */ + #include "../kernel/verify_cpu.S" .section ".text32","ax"
Signature · 1 line
2.28.0
PATCH v6 69/76 x86/realmode: Setup AP jump table
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
As part of the GHCB specification, the booting of APs under SEV-ES requires an AP jump table when transitioning from one layer of code to another (e.g. when going from UEFI to the OS). As a result, each layer that parks an AP must provide the physical address of an AP jump table to the next layer via the hypervisor.
Upon booting of the kernel, read the AP jump table address from the hypervisor. Under SEV-ES, APs are started using the INIT-SIPI-SIPI sequence. Before issuing the first SIPI request for an AP, the start CS and IP is programmed into the AP jump table. Upon issuing the SIPI request, the AP will awaken and jump to that start CS:IP address.
[ [email protected]: - Adapted to different code base
- Moved AP table setup from SIPI sending path to real-mode setup code
- Fix sparse warnings ]
--- arch/x86/include/asm/sev-es.h | 5 +++ arch/x86/include/uapi/asm/svm.h | 3 ++ arch/x86/kernel/sev-es.c | 68 +++++++++++++++++++++++++++++++++ arch/x86/realmode/init.c | 18 ++++++++- 4 files changed, 92 insertions(+), 2 deletions(-)
arch/x86/include/asm/sev-es.h +5 -0
@@ -73,6 +73,9 @@ static inline u64 lower_bits(u64 val, unsigned int bits)return (val & mask); } +struct real_mode_header ; +enum stack_type ; +/* Early IDT entry points for #VC handler */ extern void vc_no_ghcb (void );extern bool handle_vc_boot_ghcb (struct pt_regs *regs);
@@ -91,9 +94,11 @@ static __always_inline void sev_es_ist_exit(void)if (static_branch_unlikely (&sev_es_enable_key))__sev_es_ist_exit (); } +extern int sev_es_setup_ap_jump_table (struct real_mode_header *rmh);#else static inline void sev_es_ist_enter (struct pt_regs *regs) { }static inline void sev_es_ist_exit (void ) { } +static inline int sev_es_setup_ap_jump_table (struct real_mode_header *rmh) {return 0 ; }#endif #endif
arch/x86/include/uapi/asm/svm.h +3 -0
@@ -84,6 +84,9 @@/* SEV-ES software-defined VMGEXIT events */ #define SVM_VMGEXIT_MMIO_READ 0x80000001#define SVM_VMGEXIT_MMIO_WRITE 0x80000002 +#define SVM_VMGEXIT_AP_JUMP_TABLE 0x80000005 +#define SVM_VMGEXIT_SET_AP_JUMP_TABLE 0 +#define SVM_VMGEXIT_GET_AP_JUMP_TABLE 1#define SVM_VMGEXIT_UNSUPPORTED_EVENT 0x8000ffff#define SVM_EXIT_ERR -1
arch/x86/kernel/sev-es.c +68 -0
86 lines not on this page · raw message
arch/x86/realmode/init.c +16 -2
@@ -9,6 +9,7 @@#include <asm/realmode.h> #include <asm/tlbflush.h> #include <asm/crash.h> +#include <asm/sev-es.h> struct real_mode_header *real_mode_header;u32 *trampoline_cr4_features;
@@ -38,6 +39,19 @@ void __init reserve_real_mode(void)crash_reserve_low_1M (); } +static void sme_sev_setup_real_mode (struct trampoline_header *th) +{ +#ifdef CONFIG_AMD_MEM_ENCRYPT +if (sme_active ()) + th->flags |=TH_FLAGS_SME_ACTIVE ; + +if (sev_es_active ()) { +if (sev_es_setup_ap_jump_table (real_mode_header)) +panic ("Failed to update SEV-ES AP Jump Table" ); + } +#endif +} +static void __init setup_real_mode (void ) {u16 real_mode_seg;
@@ -104,13 +118,13 @@ static void __init setup_real_mode(void) *trampoline_cr4_features = mmu_cr4_features; trampoline_header->flags =0 ; -if (sme_active ()) - trampoline_header->flags |=TH_FLAGS_SME_ACTIVE ; trampoline_pgd = (u64 *)__va (real_mode_header->trampoline_pgd); trampoline_pgd[0 ] = trampoline_pgd_entry.pgd; trampoline_pgd[511 ] = init_top_pgt[511 ].pgd;#endif + +sme_sev_setup_real_mode (trampoline_header); }/*
Signature · 1 line
2.28.0
Borislav Petkov
maintainerRe: [PATCH v6 69/76] x86/realmode: Setup AP jump table
arch/x86/include/uapi/asm/svm.h line 89
Quoted 11 lines · Joerg Roedel
arch/x86/include/uapi/asm/svm.h +3
-0@@ -84,6 +84,9 @@/* SEV-ES software-defined VMGEXIT events */ #define SVM_VMGEXIT_MMIO_READ 0x80000001#define SVM_VMGEXIT_MMIO_WRITE 0x80000002 +#define SVM_VMGEXIT_AP_JUMP_TABLE 0x80000005 +#define SVM_VMGEXIT_SET_AP_JUMP_TABLE 0 +#define SVM_VMGEXIT_GET_AP_JUMP_TABLE 1
^^^^^^^^^^^^
One tab too many here.
Quoted 17 lines
arch/x86/include/uapi/asm/svm.h +0
-0#define SVM_VMGEXIT_UNSUPPORTED_EVENT 0x8000ffff#define SVM_EXIT_ERR -1arch/x86/kernel/sev-es.c +2
-0@@ -21,6 +21,8 @@#include <linux/mm.h> #include <asm/cpu_entry_area.h> +#include <asm/stacktrace.h> +#include <asm/realmode.h> #include <asm/sev-es.h> #include <asm/insn-eval.h> #include <asm/fpu/internal.h>
arch/x86/kernel/sev-es.c static __always_inline void sev_es_put_ghcb(struct ghcb_state *state) · line 224
Quoted 4 lines
arch/x86/kernel/sev-es.c +1
-0@@ -219,6 +221,9 @@ static __always_inline void sev_es_put_ghcb(struct ghcb_state *state) } } +/* Needed in vc_early_vc_forward_exception */
vc_early_forward_exception()
arch/x86/kernel/sev-es.c static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, · line 415
Quoted 10 lines
arch/x86/kernel/sev-es.c +3
-0+void do_early_exception (struct pt_regs *regs,int trapnr); +static inline u64 sev_es_rd_ghcb_msr (void ) {return native_read_msr (MSR_AMD64_SEV_ES_GHCB );@@ -407,6 +412,69 @@ static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,/* Include code shared with pre-decompression boot stage */ #include "sev-es-shared.c" +static u64 sev_es_get_jump_table_addr (void )
Static and used here only once - you can drop the previx "sev_es".
Quoted 33 lines
arch/x86/kernel/sev-es.c +33
-0+{ +struct ghcb_state state; +unsigned long flags; +struct ghcb *ghcb; +u64 ret; + +local_irq_save (flags); + + ghcb =sev_es_get_ghcb (&state); + +vc_ghcb_invalidate (ghcb); +ghcb_set_sw_exit_code (ghcb,SVM_VMGEXIT_AP_JUMP_TABLE ); +ghcb_set_sw_exit_info_1 (ghcb,SVM_VMGEXIT_GET_AP_JUMP_TABLE ); +ghcb_set_sw_exit_info_2 (ghcb,0 ); + +sev_es_wr_ghcb_msr (__pa (ghcb)); +VMGEXIT (); + +if (!ghcb_sw_exit_info_1_is_valid (ghcb) || + !ghcb_sw_exit_info_2_is_valid (ghcb)) + ret =0 ; + + ret = ghcb->save.sw_exit_info_2; + +sev_es_put_ghcb (&state); + +local_irq_restore (flags); + +return ret; +} + +int sev_es_setup_ap_jump_table (struct real_mode_header *rmh) +{
arch/x86/kernel/sev-es.c static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, · line 458
Quoted 10 lines
arch/x86/kernel/sev-es.c +10
-0+u16 startup_cs, startup_ip; +phys_addr_t jump_table_pa; +u64 jump_table_addr; +u16 __iomem *jump_table; + + jump_table_addr =sev_es_get_jump_table_addr (); + +/* Check if AP Jump Table is non-zero and page-aligned */ +if (!jump_table_addr || jump_table_addr & ~PAGE_MASK ) +return 0 ;
I think you need to return !0 here so that the panic() below fires with a modified message:
panic("Failed to get/update SEV-ES AP Jump Table");or are we gonna boot an UP guest still?
If not panic, at least a warning that at least some APs didn't come up...
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH v6 69/76] x86/realmode: Setup AP jump table
Quoted 11 lines · Borislav Petkov
arch/x86/kernel/sev-es.c static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, · line 458
Quoted 3 lines · Joerg Roedel
arch/x86/kernel/sev-es.c +3
-0+/* Check if AP Jump Table is non-zero and page-aligned */ +if (!jump_table_addr || jump_table_addr & ~PAGE_MASK ) +return 0 ;I think you need to return !0 here so that the
panic()below fires with a modified message:panic("Failed to get/update SEV-ES AP Jump Table");or are we gonna boot an UP guest still?
Right, this needs a !0 return value. This code runs once on the boot CPU before the kernel starts the secondary CPUs, so a panic() is the right thing to do if this fails.
Regards,
Joerg
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
PATCH v6 70/76 x86/smpboot: Setup TSS for starting AP
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Set up the TSS for starting APs before they are kicked. This allows the APs to use IST in early exception handling.
Also load the TSS early if the TSS entry in the GDT is present. This makes sure a TSS is only loaded when it has been set up.
--- arch/x86/include/asm/processor.h | 7 ++++++ arch/x86/include/asm/setup.h | 1 + arch/x86/kernel/cpu/common.c | 37 +++++++++++++++++++------------- arch/x86/kernel/head64.c | 11 ++++++++++ arch/x86/kernel/head_64.S | 5 +++++ arch/x86/kernel/smpboot.c | 6 ++++++ 6 files changed, 52 insertions(+), 15 deletions(-)
arch/x86/include/asm/processor.h +7 -0
@@ -697,6 +697,13 @@ extern void load_fixmap_gdt(int);extern void load_percpu_segment (int );extern void cpu_init (void );extern void cr4_init (void ); +extern void tss_setup (int cpu); + +#ifdef CONFIG_X86_64 +extern void setup_getcpu (int cpu); +#else +static inline void setup_getcpu (int cpu) { } +#endif static inline unsigned long get_debugctlmsr (void ) {
arch/x86/include/asm/setup.h +1 -0
@@ -54,6 +54,7 @@ extern void startup_64_setup_env(unsigned long physbase);extern void early_idt_setup_early_handler (unsigned long physaddr);extern void early_load_idt (void );extern void early_idt_setup (unsigned long physbase); +extern void early_load_tss (void );extern void __init do_early_exception (struct pt_regs *regs,int trapnr);#ifdef CONFIG_X86_INTEL_MID
arch/x86/kernel/cpu/common.c +22 -15
@@ -1787,7 +1787,7 @@ static void wait_for_master_cpu(int cpu) }#ifdef CONFIG_X86_64 -static inline void setup_getcpu (int cpu) +void setup_getcpu (int cpu) {unsigned long cpudata =vdso_encode_cpunode (cpu,early_cpu_to_node (cpu));struct desc_struct d = { };
@@ -1814,27 +1814,26 @@ static inline void ucode_cpu_init(int cpu)load_ucode_ap (); } -static inline void tss_setup_ist (struct tss_struct *tss) +static inline void tss_setup_ist (struct tss_struct *tss, +struct cpu_entry_area *cea) {/* Set up the per-CPU TSS IST stacks */ - tss->x86_tss.ist[IST_INDEX_DF ] =__this_cpu_ist_top_va (DF ); - tss->x86_tss.ist[IST_INDEX_NMI ] =__this_cpu_ist_top_va (NMI ); - tss->x86_tss.ist[IST_INDEX_DB ] =__this_cpu_ist_top_va (DB ); - tss->x86_tss.ist[IST_INDEX_MCE ] =__this_cpu_ist_top_va (MCE ); + tss->x86_tss.ist[IST_INDEX_DF ] =CEA_ESTACK_TOP (&cea->estacks,DF ); + tss->x86_tss.ist[IST_INDEX_NMI ] =CEA_ESTACK_TOP (&cea->estacks,NMI ); + tss->x86_tss.ist[IST_INDEX_DB ] =CEA_ESTACK_TOP (&cea->estacks,DB ); + tss->x86_tss.ist[IST_INDEX_MCE ] =CEA_ESTACK_TOP (&cea->estacks,MCE );/* Only mapped when SEV-ES is active */ - tss->x86_tss.ist[IST_INDEX_VC ] =__this_cpu_ist_top_va (VC ); + tss->x86_tss.ist[IST_INDEX_VC ] =CEA_ESTACK_TOP (&cea->estacks,VC ); }#else /* CONFIG_X86_64 */ -static inline void setup_getcpu (int cpu) { } -static inline void ucode_cpu_init (int cpu) {show_ucode_info_early (); } -static inline void tss_setup_ist (struct tss_struct *tss) { } +static inline void tss_setup_ist (struct tss_struct *tss,struct cpu_entry_area *cea) { }#endif /* !CONFIG_X86_64 */
@@ -1854,6 +1853,17 @@ static inline void tss_setup_io_bitmap(struct tss_struct *tss)#endif } +void tss_setup (int cpu) +{ +struct tss_struct *tss =per_cpu_ptr (&cpu_tss_rw, cpu); +struct cpu_entry_area *cea =get_cpu_entry_area (cpu); + +/* Initialize the TSS for cpu. */ +tss_setup_ist (tss, cea); +tss_setup_io_bitmap (tss); +set_tss_desc (cpu, &cea->tss.x86_tss); +} +/* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT
@@ -1862,7 +1872,6 @@ static inline void tss_setup_io_bitmap(struct tss_struct *tss)*/ void cpu_init (void ) { -struct tss_struct *tss =this_cpu_ptr (&cpu_tss_rw);struct task_struct *cur = current;int cpu =raw_smp_processor_id ();
@@ -1908,10 +1917,8 @@ void cpu_init(void)initialize_tlbstate_and_flush ();enter_lazy_tlb (&init_mm, cur); -/* Initialize the TSS. */ -tss_setup_ist (tss); -tss_setup_io_bitmap (tss); -set_tss_desc (cpu, &get_cpu_entry_area (cpu)->tss.x86_tss); +/* Initialize the TSS - Only needed on the boot-CPU */ +tss_setup (cpu);load_TR_desc ();/*
arch/x86/kernel/head64.c +11 -0
@@ -545,3 +545,14 @@ void __head startup_64_setup_env(unsigned long physbase) gsbase = (unsigned long )fixup_pointer ((void *)initial_gs, physbase);__wrmsr (MSR_GS_BASE , (u32 )gsbase, (u32)(gsbase >>32 )); } + +void __head early_load_tss(void) +{ +struct desc_struct *gdt = (struct desc_struct *)early_gdt_descr.address; +tss_desc tss; + +/* Load TSS only if entry in GDT is marked present */ +memcpy (&tss, &gdt[GDT_ENTRY_TSS ],sizeof (tss_desc)); +if (tss.p) + asmvolatile ("ltr %w0" ::"q" (GDT_ENTRY_TSS *8 )); +}
arch/x86/kernel/head_64.S +5 -0
@@ -220,6 +220,11 @@ SYM_CODE_START(secondary_startup_64) */ movq initial_stack(%rip), %rsp + /* Setup a TSS for early IST handlers - needs %gs to be set up */ + pushq %rsi + call early_load_tss + popq %rsi + /* Load IDT */ pushq %rsi call early_load_idt
arch/x86/kernel/smpboot.c +6 -0
@@ -1040,6 +1040,12 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,/* Enable the espfix hack for this CPU */ init_espfix_ap (cpu); +/* Set up GDT_ENTRY_CPUNODE for early exception handling */ +setup_getcpu (cpu); + +/* Setup TSS so that AP can use IST early */ +tss_setup (cpu); +/* So we see what's up */ announce_cpu (cpu, apicid);
Signature · 1 line
2.28.0
Borislav Petkov
maintainerRe: [PATCH v6 70/76] x86/smpboot: Setup TSS for starting AP
Quoted 7 lines · Joerg Roedel
arch/x86/kernel/cpu/common.c +2
-1@@ -1814,27 +1814,26 @@ static inline void ucode_cpu_init(int cpu)load_ucode_ap (); } -static inline void tss_setup_ist (struct tss_struct *tss) +static inline void tss_setup_ist (struct tss_struct *tss, +struct cpu_entry_area *cea)
arch/x86/kernel/cpu/common.c static inline void ucode_cpu_init(int cpu) · line 1824
Quoted 10 lines
arch/x86/kernel/cpu/common.c +4
-4{/* Set up the per-CPU TSS IST stacks */ - tss->x86_tss.ist[IST_INDEX_DF ] =__this_cpu_ist_top_va (DF ); - tss->x86_tss.ist[IST_INDEX_NMI ] =__this_cpu_ist_top_va (NMI ); - tss->x86_tss.ist[IST_INDEX_DB ] =__this_cpu_ist_top_va (DB ); - tss->x86_tss.ist[IST_INDEX_MCE ] =__this_cpu_ist_top_va (MCE ); + tss->x86_tss.ist[IST_INDEX_DF ] =CEA_ESTACK_TOP (&cea->estacks,DF ); + tss->x86_tss.ist[IST_INDEX_NMI ] =CEA_ESTACK_TOP (&cea->estacks,NMI ); + tss->x86_tss.ist[IST_INDEX_DB ] =CEA_ESTACK_TOP (&cea->estacks,DB ); + tss->x86_tss.ist[IST_INDEX_MCE ] =CEA_ESTACK_TOP (&cea->estacks,MCE );
#ifdef CONFIG_AMD_MEM_ENCRYPT
arch/x86/kernel/cpu/common.c static inline void ucode_cpu_init(int cpu) · line 1826
Quoted 3 lines
arch/x86/kernel/cpu/common.c +1
-1/* Only mapped when SEV-ES is active */ - tss->x86_tss.ist[IST_INDEX_VC ] =__this_cpu_ist_top_va (VC ); + tss->x86_tss.ist[IST_INDEX_VC ] =CEA_ESTACK_TOP (&cea->estacks,VC );
#endif
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH v6 71/76 x86/head/64: Don't call verify_cpu() on starting APs
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The APs are not ready to handle exceptions when verify_cpu() is called in secondary_startup_64.
--- arch/x86/include/asm/realmode.h | 1 + arch/x86/kernel/head_64.S | 12 ++++++++++++ arch/x86/realmode/init.c | 6 ++++++ 3 files changed, 19 insertions(+)
arch/x86/include/asm/realmode.h +1 -0
@@ -69,6 +69,7 @@ extern unsigned char startup_32_smp[];extern unsigned char boot_gdt[];#else extern unsigned char secondary_startup_64[]; +extern unsigned char secondary_startup_64_no_verify[];#endif static inline size_t real_mode_size_needed (void )
arch/x86/kernel/head_64.S +12 -0
@@ -140,6 +140,18 @@ SYM_CODE_START(secondary_startup_64) /* Sanitize CPU configuration */ call verify_cpu + /* + * The secondary_startup_64_no_verify entry point is only used by + * SEV-ES guests. In those guests the call to verify_cpu() would cause + * #VC exceptions which can not be handled at this stage of secondary + * CPU bringup. + * + * All non SEV-ES systems, especially Intel systems, need to execute + * verify_cpu() above to make sure NX is enabled. + */ +SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) + UNWIND_HINT_EMPTY + /* * Retrieve the modifier (SME encryption mask if SME is active) to be * added to the initial pgdir entry that will be programmed into CR3.
arch/x86/realmode/init.c +6 -0
@@ -46,6 +46,12 @@ static void sme_sev_setup_real_mode(struct trampoline_header *th) th->flags |=TH_FLAGS_SME_ACTIVE ;if (sev_es_active ()) { +/* +* Skip the call to verify_cpu() in secondary_startup_64 as it +* will cause #VC exceptions when the AP can't handle them yet. +*/ + th->start = (u64 ) secondary_startup_64_no_verify; +if (sev_es_setup_ap_jump_table (real_mode_header))panic ("Failed to update SEV-ES AP Jump Table" ); }
Signature · 1 line
2.28.0
PATCH v6 72/76 x86/head/64: Rename start_cpu0
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
For SEV-ES this entry point will be used for restarting APs after they have been offlined. Remove the '0' from the name to reflect that.
--- arch/x86/include/asm/cpu.h | 2 +- arch/x86/kernel/head_32.S | 4 ++-- arch/x86/kernel/head_64.S | 6 +++--- arch/x86/kernel/smpboot.c | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-)
arch/x86/include/asm/cpu.h +1 -1
@@ -29,7 +29,7 @@ struct x86_cpu {#ifdef CONFIG_HOTPLUG_CPU extern int arch_register_cpu (int num);extern void arch_unregister_cpu (int ); -extern void start_cpu0 (void ); +extern void start_cpu (void );#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 extern int _debug_hotplug_cpu (int cpu,int action);#endif
arch/x86/kernel/head_32.S +2 -2
@@ -143,12 +143,12 @@ SYM_CODE_END(startup_32) * up already except stack. We just set up stack here. Then call * start_secondary(). */ -SYM_FUNC_START(start_cpu0) +SYM_FUNC_START(start_cpu) movl initial_stack, %ecx movl %ecx, %esp call *(initial_code) 1: jmp 1b -SYM_FUNC_END(start_cpu0) +SYM_FUNC_END(start_cpu) #endif /*
arch/x86/kernel/head_64.S +3 -3
@@ -309,15 +309,15 @@ SYM_CODE_END(secondary_startup_64) #ifdef CONFIG_HOTPLUG_CPU /* - * Boot CPU0 entry point. It's called from play_dead(). Everything has been set + * CPU entry point. It's called from play_dead(). Everything has been set * up already except stack. We just set up stack here. Then call * start_secondary() via .Ljump_to_C_code. */ -SYM_CODE_START(start_cpu0) +SYM_CODE_START(start_cpu) UNWIND_HINT_EMPTY movq initial_stack(%rip), %rsp jmp .Ljump_to_C_code -SYM_CODE_END(start_cpu0) +SYM_CODE_END(start_cpu) #endif /* Both SMP bootup and ACPI suspend change these variables */
arch/x86/kernel/smpboot.c +2 -2
@@ -1726,7 +1726,7 @@ static inline void mwait_play_dead(void)* If NMI wants to wake up CPU0, start CPU0. */ if (wakeup_cpu0 ()) -start_cpu0 (); +start_cpu (); } }
@@ -1741,7 +1741,7 @@ void hlt_play_dead(void)* If NMI wants to wake up CPU0, start CPU0. */ if (wakeup_cpu0 ()) -start_cpu0 (); +start_cpu (); } }
Signature · 1 line
2.28.0
Borislav Petkov
maintainerRe: [PATCH v6 72/76] x86/head/64: Rename start_cpu0
Quoted 4 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
For SEV-ES this entry point will be used for restarting APs after they have been offlined. Remove the '0' from the name to reflect that.
Sure but only for SEV-ES guests and your change is unconditional. I think you can drop this patch - it doesn't really matter what the function is called.
Signature · 8 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualizationPATCH v6 73/76 x86/sev-es: Support CPU offline/online
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
Add a play_dead handler when running under SEV-ES. This is needed because the hypervisor can't deliver an SIPI request to restart the AP. Instead the kernel has to issue a VMGEXIT to halt the VCPU until the hypervisor wakes it up again.
--- arch/x86/include/uapi/asm/svm.h | 1 + arch/x86/kernel/sev-es.c | 64 +++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+)
arch/x86/include/uapi/asm/svm.h +1 -0
@@ -84,6 +84,7 @@/* SEV-ES software-defined VMGEXIT events */ #define SVM_VMGEXIT_MMIO_READ 0x80000001#define SVM_VMGEXIT_MMIO_WRITE 0x80000002 +#define SVM_VMGEXIT_AP_HLT_LOOP 0x80000004#define SVM_VMGEXIT_AP_JUMP_TABLE 0x80000005#define SVM_VMGEXIT_SET_AP_JUMP_TABLE 0#define SVM_VMGEXIT_GET_AP_JUMP_TABLE 1
arch/x86/kernel/sev-es.c +64 -0
82 lines not on this page · raw message
Signature · 1 line
2.28.0
PATCH v6 74/76 x86/sev-es: Handle NMI State
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
When running under SEV-ES the kernel has to tell the hypervisor when to open the NMI window again after an NMI was injected. This is done with an NMI-complete message to the hypervisor.
Add code to the kernels NMI handler to send this message right at the beginning of do_nmi(). This always allows nesting NMIs.
--- arch/x86/include/asm/sev-es.h | 7 +++++++ arch/x86/include/uapi/asm/svm.h | 1 + arch/x86/kernel/nmi.c | 6 ++++++ arch/x86/kernel/sev-es.c | 18 ++++++++++++++++++ 4 files changed, 32 insertions(+)
arch/x86/include/asm/sev-es.h +7 -0
@@ -95,10 +95,17 @@ static __always_inline void sev_es_ist_exit(void)__sev_es_ist_exit (); }extern int sev_es_setup_ap_jump_table (struct real_mode_header *rmh); +extern void __sev_es_nmi_complete (void ); +static __always_inline void sev_es_nmi_complete(void) +{ +if (static_branch_unlikely (&sev_es_enable_key)) +__sev_es_nmi_complete (); +}#else static inline void sev_es_ist_enter (struct pt_regs *regs) { }static inline void sev_es_ist_exit (void ) { }static inline int sev_es_setup_ap_jump_table (struct real_mode_header *rmh) {return 0 ; } +static inline void sev_es_nmi_complete (void ) { }#endif #endif
arch/x86/include/uapi/asm/svm.h +1 -0
@@ -84,6 +84,7 @@/* SEV-ES software-defined VMGEXIT events */ #define SVM_VMGEXIT_MMIO_READ 0x80000001#define SVM_VMGEXIT_MMIO_WRITE 0x80000002 +#define SVM_VMGEXIT_NMI_COMPLETE 0x80000003#define SVM_VMGEXIT_AP_HLT_LOOP 0x80000004#define SVM_VMGEXIT_AP_JUMP_TABLE 0x80000005#define SVM_VMGEXIT_SET_AP_JUMP_TABLE 0
arch/x86/kernel/nmi.c +6 -0
@@ -478,6 +478,12 @@ DEFINE_IDTENTRY_RAW(exc_nmi) {bool irq_state; +/* +* Re-enable NMIs right here when running as an SEV-ES guest. This might +* cause nested NMIs, but those can be handled safely. +*/ +sev_es_nmi_complete (); +if (IS_ENABLED (CONFIG_SMP ) &&arch_cpu_is_offline (smp_processor_id ()))return ;
arch/x86/kernel/sev-es.c +18 -0
@@ -414,6 +414,24 @@ static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,/* Include code shared with pre-decompression boot stage */ #include "sev-es-shared.c" +void __sev_es_nmi_complete (void ) +{ +struct ghcb_state state; +struct ghcb *ghcb; + + ghcb =sev_es_get_ghcb (&state); + +vc_ghcb_invalidate (ghcb); +ghcb_set_sw_exit_code (ghcb,SVM_VMGEXIT_NMI_COMPLETE ); +ghcb_set_sw_exit_info_1 (ghcb,0 ); +ghcb_set_sw_exit_info_2 (ghcb,0 ); + +sev_es_wr_ghcb_msr (__pa (ghcb)); +VMGEXIT (); + +sev_es_put_ghcb (&state); +} +static u64 sev_es_get_jump_table_addr (void ) {struct ghcb_state state;
Signature · 1 line
2.28.0
PATCH v6 75/76 x86/efi: Add GHCB mappings when SEV-ES is active
In reply to Joerg RoedelFrom: Tom Lendacky <[email protected]>
Calling down to EFI runtime services can result in the firmware performing VMGEXIT calls. The firmware is likely to use the GHCB of the OS (e.g., for setting EFI variables), so each GHCB in the system needs to be identity mapped in the EFI page tables, as unencrypted, to avoid page faults.
--- arch/x86/boot/compressed/sev-es.c | 1 + arch/x86/include/asm/sev-es.h | 2 ++ arch/x86/kernel/sev-es.c | 30 ++++++++++++++++++++++++++++++ arch/x86/platform/efi/efi_64.c | 10 ++++++++++ 4 files changed, 43 insertions(+)
arch/x86/boot/compressed/sev-es.c +1 -0
@@ -12,6 +12,7 @@*/ #include "misc.h" +#include <asm/pgtable_types.h> #include <asm/sev-es.h> #include <asm/trapnr.h> #include <asm/trap_pf.h>
arch/x86/include/asm/sev-es.h +2 -0
@@ -101,11 +101,13 @@ static __always_inline void sev_es_nmi_complete(void)if (static_branch_unlikely (&sev_es_enable_key))__sev_es_nmi_complete (); } +extern int __init sev_es_efi_map_ghcbs (pgd_t *pgd);#else static inline void sev_es_ist_enter (struct pt_regs *regs) { }static inline void sev_es_ist_exit (void ) { }static inline int sev_es_setup_ap_jump_table (struct real_mode_header *rmh) {return 0 ; }static inline void sev_es_nmi_complete (void ) { } +static inline int sev_es_efi_map_ghcbs (pgd_t *pgd) {return 0 ; }#endif #endif
arch/x86/kernel/sev-es.c +30 -0
@@ -495,6 +495,36 @@ int sev_es_setup_ap_jump_table(struct real_mode_header *rmh)return 0 ; } +/* +* This is needed by the OVMF UEFI firmware which will use whatever it finds in +* the GHCB MSR as its GHCB to talk to the hypervisor. So make sure the per-cpu +* runtime GHCBs used by the kernel are also mapped in the EFI page-table. +*/ +int __init sev_es_efi_map_ghcbs (pgd_t *pgd) +{ +struct sev_es_runtime_data *data; +unsigned long address, pflags; +int cpu; +u64 pfn; + +if (!sev_es_active ()) +return 0 ; + + pflags = _PAGE_NX | _PAGE_RW; + +for_each_possible_cpu (cpu) { + data =per_cpu (runtime_data, cpu); + + address =__pa (&data->ghcb_page); + pfn = address >>PAGE_SHIFT ; + +if (kernel_map_pages_in_pgd (pgd, pfn, address,1 , pflags)) +return 1 ; + } + +return 0 ; +} +static enum es_result vc_handle_msr (struct ghcb *ghcb,struct es_em_ctxt *ctxt) {struct pt_regs *regs = ctxt->regs;
arch/x86/platform/efi/efi_64.c +10 -0
@@ -47,6 +47,7 @@#include <asm/realmode.h> #include <asm/time.h> #include <asm/pgalloc.h> +#include <asm/sev-es.h> /* * We allocate runtime services regions top-down, starting from -4G, i.e.
@@ -229,6 +230,15 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)return 1 ; } +/* +* When SEV-ES is active, the GHCB as set by the kernel will be used +* by firmware. Create a 1:1 unencrypted mapping for each GHCB. +*/ +if (sev_es_efi_map_ghcbs (pgd)) { +pr_err ("Failed to create 1:1 mapping for the GHCBs!\n" ); +return 1 ; + } +/* * When making calls to the firmware everything needs to be 1:1 * mapped and addressable with 32-bit pointers. Map the kernel
Signature · 1 line
2.28.0
PATCH v6 76/76 x86/sev-es: Check required CPU features for SEV-ES
In reply to Joerg RoedelFrom: Martin Radev <[email protected]>
Make sure the machine supports RDRAND, otherwise there is no trusted source of of randomness in the system.
To also check this in the pre-decompression stage, make has_cpuflag not depend on CONFIG_RANDOMIZE_BASE anymore.
--- arch/x86/boot/compressed/cpuflags.c | 4 ---- arch/x86/boot/compressed/misc.h | 5 +++-- arch/x86/boot/compressed/sev-es.c | 3 +++ arch/x86/kernel/sev-es-shared.c | 15 +++++++++++++++ arch/x86/kernel/sev-es.c | 3 +++ 5 files changed, 24 insertions(+), 6 deletions(-)
arch/x86/boot/compressed/cpuflags.c +0 -4
@@ -1,6 +1,4 @@// SPDX-License-Identifier: GPL-2.0 -#ifdef CONFIG_RANDOMIZE_BASE -#include "../cpuflags.c" bool has_cpuflag (int flag)
@@ -9,5 +7,3 @@ bool has_cpuflag(int flag)return test_bit (flag, cpu.flags); } - -#endif
arch/x86/boot/compressed/misc.h +3 -2
@@ -85,8 +85,6 @@ void choose_random_location(unsigned long input,unsigned long *output, unsigned long output_size, unsigned long *virt_addr); -/* cpuflags.c */ -bool has_cpuflag (int flag);#else static inline void choose_random_location(unsigned long input, unsigned long input_size,
@@ -97,6 +95,9 @@ static inline void choose_random_location(unsigned long input, }#endif +/* cpuflags.c */ +bool has_cpuflag (int flag); +#ifdef CONFIG_X86_64 extern int set_page_decrypted (unsigned long address);extern int set_page_encrypted (unsigned long address);
arch/x86/boot/compressed/sev-es.c +3 -0
@@ -145,6 +145,9 @@ void sev_es_shutdown_ghcb(void)if (!boot_ghcb)return ; +if (!sev_es_check_cpu_features ()) +error ("SEV-ES CPU Features missing." ); +/* * GHCB Page must be flushed from the cache and mapped encrypted again. * Otherwise the running kernel will see strange cache effects when
arch/x86/kernel/sev-es-shared.c +15 -0
@@ -9,6 +9,21 @@* and is included directly into both code-bases. */ +#ifndef __BOOT_COMPRESSED +#define error (v) pr_err(v) +#define has_cpuflag (f) boot_cpu_has(f) +#endif + +static bool __init sev_es_check_cpu_features (void ) +{ +if (!has_cpuflag (X86_FEATURE_RDRAND )) { +error ("RDRAND instruction not supported - no trusted source of randomness available\n" ); +return false; + } + +return true; +} +static void sev_es_terminate (unsigned int reason) {u64 val =GHCB_SEV_TERMINATE ;
arch/x86/kernel/sev-es.c +3 -0
@@ -670,6 +670,9 @@ void __init sev_es_init_vc_handling(void)if (!sev_es_active ())return ; +if (!sev_es_check_cpu_features ()) +panic ("SEV-ES CPU Features missing" ); +/* Enable SEV-ES special handling */ static_branch_enable (&sev_es_enable_key);
Signature · 1 line
2.28.0
Hi Joerg,
Quoted 12 lines · Joerg Roedel
From: Joerg Roedel <[email protected]>
Hi,
here is the new version of the SEV-ES client enabling patch-set. It is based on the latest tip/master branch and contains the necessary changes. In particular those ar:
- Enabling CR4.FSGSBASE early on supported processors so that early #VC exceptions on APs can be handled.
Thanks for the new update! I still see the same FSGSBASE behavior on our platform.
That is, APs come up offline; masking out either FSGSBASE or RDPID from the guest's CPUID results in all CPUs online.
Is that still expected with this patch set? (As you mentioned in an earlier reply, I’m testing on a Rome system.)
Thanks!
Mike
Hi Mike,
Quoted 7 lines · Mike Stunes
Thanks for the new update! I still see the same FSGSBASE behavior on our platform.
That is, APs come up offline; masking out either FSGSBASE or RDPID from the guest's CPUID results in all CPUs online.
Is that still expected with this patch set? (As you mentioned in an earlier reply, I’m testing on a Rome system.)
The RDPID fix (removing RDPID usage from paranoid_entry) is probably not yet merged into the base you have been using. But removing RDPID from CPUID should make things work until the fix is merged.
Regards,
Joerg