enable VLAN offload in DCF
cover enable VLAN offload in DCF
This patch set enabled port representor and vlan offload base on DCF port representor.
Qiming Yang (2):
net/ice: add dcf port representor infrastructure net/ice: add VLAN config for DCF
drivers/net/ice/Makefile | 1 + drivers/net/ice/ice_dcf.h | 1 + drivers/net/ice/ice_dcf_ethdev.c | 66 +++- drivers/net/ice/ice_dcf_ethdev.h | 11 + drivers/net/ice/ice_dcf_vf_representor.c | 365 +++++++++++++++++++++++ 5 files changed, 442 insertions(+), 2 deletions(-) create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
Signature · 1 line
2.17.1
PATCH 1/2 net/ice: add dcf port representor infrastructure
Defines data structures and code to init/uninit VF representors during pci_probe and pci_remove respectively.
Most of the dev_ops for the VF representor are just stubs for now and will be will be filled out in next patch
--- drivers/net/ice/Makefile | 1 + drivers/net/ice/ice_dcf_ethdev.c | 66 +++++- drivers/net/ice/ice_dcf_ethdev.h | 11 + drivers/net/ice/ice_dcf_vf_representor.c | 245 +++++++++++++++++++++++ 4 files changed, 321 insertions(+), 2 deletions(-) create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
drivers/net/ice/Makefile +1 -0
@@ -88,6 +88,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_generic_flow.c SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_dcf.c SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_dcf_ethdev.c +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_dcf_vf_representor.c SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_dcf_parent.c # install this header file
drivers/net/ice/ice_dcf_ethdev.c +64 -2
81 lines not on this page · raw message
drivers/net/ice/ice_dcf_ethdev.h +11 -0
@@ -22,9 +22,20 @@ struct ice_dcf_adapter { struct ice_dcf_hw real_hw; }; +/** +* Struct to store private data for each VF representor instance +*/ +struct ice_dcf_vf_representor { +struct ice_dcf_adapter *adapter; +uint16_t switch_domain_id; +uint16_t vf_id; +}; +void ice_dcf_handle_pf_event_msg (struct ice_dcf_hw *dcf_hw,uint8_t *msg,uint16_t msglen);int ice_dcf_init_parent_adapter (struct rte_eth_dev *eth_dev);void ice_dcf_uninit_parent_adapter (struct rte_eth_dev *eth_dev); +int ice_dcf_vf_representor_init (struct rte_eth_dev *ethdev,void *init_params); +int ice_dcf_vf_representor_uninit (struct rte_eth_dev *ethdev);#endif /* _ICE_DCF_ETHDEV_H_ */
drivers/net/ice/ice_dcf_vf_representor.c new file +245 -0
245 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructure
Quoted 37 lines
-----Original Message-----
From: dev <[email protected]> On Behalf Of Qiming Yang
Sent: Wednesday, September 2, 2020 2:38 PM
To: [email protected]
Cc: Zhang, Qi Z <[email protected]>; Yang, Qiming <[email protected]>
Subject: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructureDefines data structures and code to init/uninit VF representors during
pci_probeandpci_removerespectively.
Most of thedev_opsfor the VF representor are just stubs for now and will be will be filled out in next patchSigned-off-by Qiming Yang <[email protected]>--- drivers/net/ice/Makefile | 1 + drivers/net/ice/ice_dcf_ethdev.c | 66 +++++- drivers/net/ice/ice_dcf_ethdev.h | 11 + drivers/net/ice/ice_dcf_vf_representor.c | 245 +++++++++++++++++++++++ 4 files changed, 321 insertions(+), 2 deletions(-) create mode 100644
drivers/net/ice/ice_dcf_vf_representor.cdrivers/net/ice/Makefile index renamed from drivers/net/ice/Makefile +0
-0
34cd4024b..f9eb34a87100644drivers/net/ice/Makefile +0
-0@@ -88,6 +88,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=
ice_generic_flow.cSRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=
ice_dcf.cSRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_vf_representor.c
SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_parent.c
<...>
drivers/net/ice/Makefile
Quoted 4 lines
drivers/net/ice/Makefile +4
-0+ +static int +ice_dcf_representor_tx_queue_setup(__rte_unused struct rte_eth_dev *dev, + __rte_unused uint16_t rx_queue_id,
Should be tx_queue_id which is more readable?
drivers/net/ice/Makefile
Quoted 1 line
drivers/net/ice/Makefile +1
-0+ __rte_unused uint16_t nb_rx_desc,
Should be nb_tx_desc?
Quoted 5 lines
drivers/net/ice/Makefile +5
-0+ __rte_unused unsigned int socket_id, + __rte_unused const struct rte_eth_txconf *tx_conf) { + return 0; +} +
<...>
drivers/net/ice/Makefile
Quoted 11 lines
drivers/net/ice/Makefile +11
-0+ + /* No data-path, but need stub Rx/Tx functions to avoid crash + * when testing with the likes of testpmd. + */ + ethdev->rx_pkt_burst = ice_dcf_representor_rx_burst; + ethdev->tx_pkt_burst = ice_dcf_representor_tx_burst; + + ethdev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR; + ethdev->data->representor_id = representor->vf_id; + + struct rte_ether_addr mac_addr;
Why not move this to the beginning of the function?
Quoted 16 lines
drivers/net/ice/Makefile +14
-1+ + memset(&mac_addr, 0, sizeof(mac_addr)); + ethdev->data->mac_addrs = &mac_addr; + + return 0; +} + +int +ice_dcf_vf_representor_uninit(struct rte_eth_dev *ethdev) { + ethdev->data->mac_addrs = NULL; + + return 0; +} + --2.17.1
Re: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructure
All the format issue will be rechecked in the next version
Quoted 54 lines
-----Original Message-----
From: Xing, Beilei <[email protected]>
Sent: Tuesday, September 8, 2020 19:35
To: Yang, Qiming <[email protected]>; [email protected]
Cc: Zhang, Qi Z <[email protected]>; Yang, Qiming <[email protected]>
Subject: RE: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructureQuoted 36 lines
-----Original Message-----
From: dev <[email protected]> On Behalf Of Qiming Yang
Sent: Wednesday, September 2, 2020 2:38 PM
To: [email protected]
Cc: Zhang, Qi Z <[email protected]>; Yang, Qiming <[email protected]>
Subject: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructureDefines data structures and code to init/uninit VF representors during
pci_probeandpci_removerespectively.
Most of thedev_opsfor the VF representor are just stubs for now and will be will be filled out in next patchSigned-off-by Qiming Yang <[email protected]>--- drivers/net/ice/Makefile | 1 + drivers/net/ice/ice_dcf_ethdev.c | 66 +++++- drivers/net/ice/ice_dcf_ethdev.h | 11 + drivers/net/ice/ice_dcf_vf_representor.c | 245 +++++++++++++++++++++++ 4 files changed, 321 insertions(+), 2 deletions(-) create mode100644
drivers/net/ice/ice_dcf_vf_representor.cdrivers/net/ice/Makefile index renamed from drivers/net/ice/Makefile +0
-0
34cd4024b..f9eb34a87100644drivers/net/ice/Makefile +0
-0@@ -88,6 +88,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=
ice_generic_flow.cSRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=
ice_dcf.cSRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_vf_representor.c
SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_parent.c<...>
drivers/net/ice/Makefile
Quoted 3 lines
drivers/net/ice/Makefile +3
-0+ +static int +ice_dcf_representor_tx_queue_setup(__rte_unused struct rte_eth_dev*dev,
Quoted 5 lines
drivers/net/ice/Makefile
Quoted 1 line
drivers/net/ice/Makefile +1
-0+ __rte_unused uint16_t rx_queue_id,Should be
tx_queue_idwhich is more readable?drivers/net/ice/Makefile
Quoted 1 line
drivers/net/ice/Makefile +1
-0+ __rte_unused uint16_t nb_rx_desc,Should be
nb_tx_desc?
typo
Quoted 10 lines
drivers/net/ice/Makefile
Quoted 3 lines
drivers/net/ice/Makefile +2
-0+ __rte_unused unsigned int socket_id, + __rte_unused const struct rte_eth_txconf *tx_conf){
Quoted 3 lines
drivers/net/ice/Makefile +3
-0+ return 0; +} +<...>
Quoted 12 lines
drivers/net/ice/Makefile
Quoted 11 lines
drivers/net/ice/Makefile +11
-0+ + /* No data-path, but need stub Rx/Tx functions to avoid crash + * when testing with the likes of testpmd. + */ + ethdev->rx_pkt_burst = ice_dcf_representor_rx_burst; + ethdev->tx_pkt_burst = ice_dcf_representor_tx_burst; + + ethdev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR; + ethdev->data->representor_id = representor->vf_id; + + struct rte_ether_addr mac_addr;Why not move this to the beginning of the function?
Format error
Quoted 17 lines
Quoted 17 lines
drivers/net/ice/Makefile +14
-1+ + memset(&mac_addr, 0, sizeof(mac_addr)); + ethdev->data->mac_addrs = &mac_addr; + + return 0; +} + +int +ice_dcf_vf_representor_uninit(struct rte_eth_dev *ethdev) { + ethdev->data->mac_addrs = NULL; + + return 0; +} + --2.17.1
Re: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructure
In reply to Qiming YangQuoted 32 lines
-----Original Message-----
From: dev <[email protected]> On Behalf Of Qiming Yang
Sent: Wednesday, September 2, 2020 2:38 PM
To: [email protected]
Cc: Zhang, Qi Z <[email protected]>; Yang, Qiming <[email protected]>
Subject: [dpdk-dev] [PATCH 1/2] net/ice: add dcf port representor infrastructureDefines data structures and code to init/uninit VF representors during
pci_probeandpci_removerespectively.
Most of thedev_opsfor the VF representor are just stubs for now and will be will be filled out in next patchSigned-off-by Qiming Yang <[email protected]>--- drivers/net/ice/Makefile | 1 + drivers/net/ice/ice_dcf_ethdev.c | 66 +++++- drivers/net/ice/ice_dcf_ethdev.h | 11 + drivers/net/ice/ice_dcf_vf_representor.c | 245 +++++++++++++++++++++++ 4 files changed, 321 insertions(+), 2 deletions(-) create mode 100644
drivers/net/ice/ice_dcf_vf_representor.cdrivers/net/ice/Makefile index renamed from drivers/net/ice/Makefile +0
-0
34cd4024b..f9eb34a87100644drivers/net/ice/Makefile +0
-0@@ -88,6 +88,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=
ice_generic_flow.c
Quoted 4 lines
SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=
ice_dcf.cSRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_vf_representor.c
SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) +=ice_dcf_parent.c
Need to change in meson.build.
Quoted 9 lines
# install this header filedrivers/net/ice/ice_dcf_ethdev.c +0
-0@@ -973,17 +973,79 @@ ice_dcf_cap_selected(struct rte_devargs *devargs) static int eth_ice_dcf_pci_probe(__rte_unused struct rte_pci_driver *pci_drv,struct rte_pci_device *pci_dev) {
<snip>
drivers/net/ice/ice_dcf_ethdev.c ice_dcf_cap_selected(struct rte_devargs *devargs) · line 1045
Quoted 12 lines
static int
eth_ice_dcf_pci_remove(struct rte_pci_device *pci_dev){drivers/net/ice/ice_dcf_ethdev.c +9
-1-return rte_eth_dev_pci_generic_remove (pci_dev, ice_dcf_dev_uninit); +struct rte_eth_dev *ethdev; + + ethdev =rte_eth_dev_allocated (pci_dev->device.name); +if (!ethdev) +return 0 ; + +if (ethdev->data->dev_flags &RTE_ETH_DEV_REPRESENTOR ) +return rte_eth_dev_pci_generic_remove (pci_dev, + ice_dcf_dev_uninit);
Should be ice_dcf_vf_representor_uninit here andice_dcf_dev_uninit below ?
Quoted 6 lines
drivers/net/ice/ice_dcf_ethdev.c +3
-0+else + return rte_eth_dev_pci_generic_remove(pci_dev, +ice_dcf_vf_representor_uninit);}
<snip>
PATCH 2/2 net/ice: add VLAN config for DCF
In reply to Qiming YangThis patch add support for VF VLAN offload, port VLAN id set and VLAN ethertype set in DCF.
This patch depend on base code update.
--- drivers/net/ice/ice_dcf.h | 1 + drivers/net/ice/ice_dcf_vf_representor.c | 120 +++++++++++++++++++++++ 2 files changed, 121 insertions(+)
drivers/net/ice/ice_dcf.h +1 -0
@@ -59,6 +59,7 @@ struct ice_dcf_hw {uint16_t nb_msix;uint16_t rxq_map[16 ];struct virtchnl_eth_stats eth_stats_offset; +struct virtchnl_dcf_vlan_offload vlan_config; }; int ice_dcf_execute_virtchnl_cmd(struct ice_dcf_hw *hw,
drivers/net/ice/ice_dcf_vf_representor.c +120 -0
132 lines not on this page · raw message
Signature · 1 line
2.17.1