net: phy: dp83867: Fix various styling and space issues
Subsystems (3)
PATCH v2 1/1 net: phy: dp83867: Fix various styling and space issues
Fix spacing issues reported for misaligned switch..case and extra new lines.
Also updated the file header to comply with networking commet style.
Reviewed-by Florian Fainelli <[email protected]>
Signed-off-by Dan Murphy <[email protected]>
--- drivers/net/phy/dp83867.c | 45 ++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 24 deletions(-)
drivers/net/phy/dp83867.c +21 -24
@@ -1,6 +1,5 @@// SPDX-License-Identifier: GPL-2.0 -/* -* Driver for the Texas Instruments DP83867 PHY +/* Driver for the Texas Instruments DP83867 PHY * * Copyright (C) 2015 Texas Instruments Inc. */
@@ -113,7 +112,6 @@#define DP83867_RGMII_RX_CLK_DELAY_SHIFT 0#define DP83867_RGMII_RX_CLK_DELAY_INV (DP83867_RGMII_RX_CLK_DELAY_MAX + 1) -/* IO_MUX_CFG bits */ #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK 0x1f#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
@@ -384,22 +382,22 @@ static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt) DP83867_DOWNSHIFT_EN);switch (cnt) { -case DP83867_DOWNSHIFT_1_COUNT : - count =DP83867_DOWNSHIFT_1_COUNT_VAL ; -break ; -case DP83867_DOWNSHIFT_2_COUNT : - count =DP83867_DOWNSHIFT_2_COUNT_VAL ; -break ; -case DP83867_DOWNSHIFT_4_COUNT : - count =DP83867_DOWNSHIFT_4_COUNT_VAL ; -break ; -case DP83867_DOWNSHIFT_8_COUNT : - count =DP83867_DOWNSHIFT_8_COUNT_VAL ; -break ; -default : -phydev_err (phydev, -"Downshift count must be 1, 2, 4 or 8\n" ); -return -EINVAL ; +case DP83867_DOWNSHIFT_1_COUNT : + count =DP83867_DOWNSHIFT_1_COUNT_VAL ; +break ; +case DP83867_DOWNSHIFT_2_COUNT : + count =DP83867_DOWNSHIFT_2_COUNT_VAL ; +break ; +case DP83867_DOWNSHIFT_4_COUNT : + count =DP83867_DOWNSHIFT_4_COUNT_VAL ; +break ; +case DP83867_DOWNSHIFT_8_COUNT : + count =DP83867_DOWNSHIFT_8_COUNT_VAL ; +break ; +default : +phydev_err (phydev, +"Downshift count must be 1, 2, 4 or 8\n" ); +return -EINVAL ; } val =DP83867_DOWNSHIFT_EN ;
@@ -411,7 +409,7 @@ static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt) }static int dp83867_get_tunable (struct phy_device *phydev, -struct ethtool_tunable *tuna,void *data) +struct ethtool_tunable *tuna,void *data) {switch (tuna->id) {case ETHTOOL_PHY_DOWNSHIFT :
@@ -422,7 +420,7 @@ static int dp83867_get_tunable(struct phy_device *phydev, }static int dp83867_set_tunable (struct phy_device *phydev, -struct ethtool_tunable *tuna,const void *data) +struct ethtool_tunable *tuna,const void *data) {switch (tuna->id) {case ETHTOOL_PHY_DOWNSHIFT :
@@ -524,11 +522,10 @@ static int dp83867_of_init(struct phy_device *phydev) dp83867->io_impedance =-1 ;/* leave at default */ dp83867->rxctrl_strap_quirk =of_property_read_bool (of_node, -"ti,dp83867-rxctrl-strap-quirk" ); +"ti,dp83867-rxctrl-strap-quirk" ); dp83867->sgmii_ref_clk_en =of_property_read_bool (of_node, -"ti,sgmii-ref-clock-output-enable" ); - +"ti,sgmii-ref-clock-output-enable" ); dp83867->rx_id_delay =DP83867_RGMII_RX_CLK_DELAY_INV ; ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
Signature · 1 line
2.28.0
From: Dan Murphy <[email protected]>
Date: Thu, 3 Sep 2020 14:51:12 -0500
Quoted 7 lines
Fix spacing issues reported for misaligned switch..case and extra new lines.
Also updated the file header to comply with networking commet style.
Reviewed-by Florian Fainelli <[email protected]>Signed-off-by Dan Murphy <[email protected]>
Applied, thank you.