package/uclibc: bump version to 1.0.35
PATCH v2 1/2 package/uclibc: bump version to 1.0.35
Drop patch from this release.
--- ...ude-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch | 68 ------------------- package/uclibc/uclibc.hash | 4 +- package/uclibc/uclibc.mk | 2 +- 3 files changed, 3 insertions(+), 71 deletions(-) delete mode 100644 package/uclibc/0001-mips-Do-not-include-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch
package/uclibc/0001-mips-Do-not-include-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch deleted +0 -68
@@ -1,68 +0,0 @@ -From aad6cdbcff0f5411a09ac524637fea62652786a3 Mon Sep 17 00:00:00 2001 -From: Romain Naour <[email protected]> -Date: Fri, 8 May 2020 18:39:45 +0200 -Subject: [PATCH] mips: Do not include hi and lo in __SYSCALL_CLOBBERS for R6 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -From [1] -"GCC 10 (PR 91233) won't silently allow registers that are not architecturally -available to be present in the clobber list anymore, resulting in build failure -for mips*r6 targets in form of: -... -.../sysdep.h:146:2: error: the register ?lo? cannot be clobbered in ?asm? for the current target - 146 | __asm__ volatile ( \ - | ^~~~~~~ - -This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension. -This patch provides the alternative definitions of __SYSCALL_CLOBBERS for r6 -targets that won't include those registers." - -[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8 - -Signed-off-by: Romain Naour <[email protected]> -Cc: Waldemar Brodkorb <[email protected]> ---- - libc/sysdeps/linux/mips/bits/syscalls.h | 18 ++++++++++++++---- - 1 file changed, 14 insertions(+), 4 deletions(-) - -diff --git a/libc/sysdeps/linux/mips/bits/syscalls.h b/libc/sysdeps/linux/mips/bits/syscalls.h -index b8f80597e..13728ac55 100644 ---- a/libc/sysdeps/linux/mips/bits/syscalls.h -+++ b/libc/sysdeps/linux/mips/bits/syscalls.h -@@ -270,8 +270,13 @@ - _sys_result; \ - }) - --#define __SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", \ -- "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#if __mips_isa_rev >= 6 -+# define __SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "memory" -+#else -+# define __SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#endif - - #else /* N32 || N64 */ - -@@ -327,8 +332,13 @@ - _sys_result; \ - }) - --#define __SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ -- "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#if __mips_isa_rev >= 6 -+# define __SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "memory" -+#else -+# define __SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#endif - - #endif - --- -2.25.4 -
package/uclibc/uclibc.hash +2 -2
@@ -1,4 +1,4 @@ -# From https://downloads.uclibc-ng.org/releases/1.0.34/uClibc-ng-1.0.34.tar.xz.sha256 -sha256 e6776229eee8d3f5a1cd29fb4286630e3cb9e97dded4e8f4a3a9bb4fa8c0d5e3 uClibc-ng-1.0.34.tar.xz +# From https://downloads.uclibc-ng.org/releases/1.0.35/uClibc-ng-1.0.35.tar.xz.sha256 +sha256 4d0ee138f037017695a66b556b70f77a0eab8a238819bcb60af890b7b3382a2b uClibc-ng-1.0.35.tar.xz # Locally calculated sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB
package/uclibc/uclibc.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_VERSION = 1.0.34 +UCLIBC_VERSION = 1.0.35 UCLIBC_SOURCE = uClibc-ng-$(UCLIBC_VERSION).tar.xz UCLIBC_SITE = https://downloads.uclibc-ng.org/releases/$(UCLIBC_VERSION) UCLIBC_LICENSE = LGPL-2.1+
Signature · 1 line
2.28.0
PATCH v2 2/2 package/iproute2: bump version to 5.8.0
For uclibc it requires v1.0.35, which contains 8bc41f131 ("Add {name, open}_to_handle_at() implementation").
---
Hi,
I tested this and it looks like the patch didn't apply, when tested with ./utils/test-pkg:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-x86-64-glibc [ 3/45]: OK
br-aarch64-glibc [ 4/45]: OK
br-arcle-hs38 [ 5/45]: FAILED
br-arm-basic [ 6/45]: FAILED
br-arm-cortex-a9-glibc [ 7/45]: OK
br-arm-cortex-a9-musl [ 8/45]: OK
br-arm-cortex-m4-full [ 9/45]: SKIPPED
br-arm-full [10/45]: FAILED
br-arm-full-nothread [11/45]: FAILED
br-arm-full-static [12/45]: FAILED
br-i386-pentium-mmx-musl [13/45]: OK
br-i386-pentium4-full [14/45]: FAILED
br-microblazeel-full [15/45]: OK
br-mipsel-o32-full [16/45]: FAILED
br-mips32r6-el-hf-glibc [17/45]: OK
br-mips64-n64-full [18/45]: FAILED
br-mips64r6-el-hf-glibc [19/45]: OK
br-m68k-5208-full [20/45]: SKIPPED
br-m68k-68040-full [21/45]: FAILED
br-nios2-glibc [22/45]: OK
br-openrisc-uclibc [23/45]: OK
br-powerpc-e500mc-full [24/45]: FAILED
br-powerpc-603e-basic-cpp [25/45]: FAILED
br-powerpc64le-power8-glibc [26/45]: OK
br-powerpc64-power7-glibc [27/45]: OK
br-riscv32 [28/45]: OK
br-riscv64 [29/45]: OK
br-riscv64-musl [30/45]: OK
br-sh4-full [31/45]: FAILED
br-sparc-uclibc [32/45]: FAILED
br-sparc64-glibc [33/45]: OK
br-xtensa-full [34/45]: FAILED
br-x86-64-core2-full [35/45]: FAILED
br-x86-64-musl [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips [43/45]: OK
sourcery-mips64 [44/45]: OK
sourcery-nios2 [45/45]: OKBut locally tested it works. Where can be a problem?
Kind regards,
Petr
.../0001-devlink-update-include-files.patch | 55 ------------------- package/iproute2/iproute2.hash | 2 +- package/iproute2/iproute2.mk | 2 +- 3 files changed, 2 insertions(+), 57 deletions(-) delete mode 100644 package/iproute2/0001-devlink-update-include-files.patch
package/iproute2/0001-devlink-update-include-files.patch deleted +0 -55
@@ -1,55 +0,0 @@ -From 12fafa27c7b306e6c397e858f4d5a8159500f659 Mon Sep 17 00:00:00 2001 -From: Stephen Hemminger <[email protected]> -Date: Thu, 11 Jun 2020 09:46:46 -0700 -Subject: devlink: update include files - -Use the tool iwyu to get more complete list of includes for -all the bits used by devlink. - -This should also fix build with musl libc. - -Fixes: c4dfddccef4e ("fix JSON output of mon command") -Reported-off-by: Dan Robertson <[email protected]> -Signed-off-by: Stephen Hemminger <[email protected]> - -[Retrieved from: -https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/commit/?id=12fafa27c7b306e6c397e858f4d5a8159500f659] -Signed-off-by: Fabrice Fontaine <[email protected]> ---- - devlink/devlink.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - -diff --git a/devlink/devlink.c b/devlink/devlink.c -index 507972c3..ce2e4676 100644 ---- a/devlink/devlink.c -+++ b/devlink/devlink.c -@@ -19,18 +19,25 @@ - #include <limits.h> - #include <errno.h> - #include <inttypes.h> -+#include <signal.h> -+#include <time.h> -+#include <netinet/in.h> -+#include <arpa/inet.h> - #include <sys/sysinfo.h> - #define _LINUX_SYSINFO_H /* avoid collision with musl header */ - #include <linux/genetlink.h> - #include <linux/devlink.h> -+#include <linux/netlink.h> - #include <libmnl/libmnl.h> - #include <netinet/ether.h> -+#include <sys/select.h> -+#include <sys/socket.h> - #include <sys/types.h> - - #include "SNAPSHOT.h" - #include "list.h" - #include "mnlg.h" --#include "json_writer.h" -+#include "json_print.h" - #include "utils.h" - #include "namespace.h" - --- -cgit 1.2.3-1.el7 -
package/iproute2/iproute2.hash +1 -1
@@ -1,3 +1,3 @@ # From https://kernel.org/pub/linux/utils/net/iproute2/sha256sums.asc -sha256 725dc7ba94aae54c6f8d4223ca055d9fb4fe89d6994b1c03bfb4411c4dd10f21 iproute2-5.7.0.tar.xz +sha256 cfcd1f890290f8c8afcc91d9444ad929b9252c16f9ab3f286c50dd3c59dc646e iproute2-5.8.0.tar.xz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING
package/iproute2/iproute2.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -IPROUTE2_VERSION = 5.7.0 +IPROUTE2_VERSION = 5.8.0 IPROUTE2_SOURCE = iproute2-$(IPROUTE2_VERSION).tar.xz IPROUTE2_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/net/iproute2 IPROUTE2_DEPENDENCIES = host-bison host-flex host-pkgconf \
Signature · 1 line
2.28.0
PATCH v2 2/2 package/iproute2: bump version to 5.8.0
Quoted 2 lines · On Thu, 3 Sep 2020 17:57:28 +0200 Petr Vorel <[email protected]> wrote:
For uclibc it requires v1.0.35, which contains
8bc41f131("Add {name, open}_to_handle_at() implementation").
Since it requires uClibc 1.0.35, we need to hold a little bit on this one, until we rebuild all toolchains.
Quoted 1 line
I tested this and it looks like the patch didn't apply, when tested with ./utils/test-pkg:
The patch didn't apply ? This doesn't make much sense. Perhaps you wanted to say "doesn't build" ?
Quoted 37 lines
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-x86-64-glibc [ 3/45]: OK
br-aarch64-glibc [ 4/45]: OK
br-arcle-hs38 [ 5/45]: FAILED
br-arm-basic [ 6/45]: FAILED
br-arm-cortex-a9-glibc [ 7/45]: OK
br-arm-cortex-a9-musl [ 8/45]: OK
br-arm-cortex-m4-full [ 9/45]: SKIPPED
br-arm-full [10/45]: FAILED
br-arm-full-nothread [11/45]: FAILED
br-arm-full-static [12/45]: FAILED
br-i386-pentium-mmx-musl [13/45]: OK
br-i386-pentium4-full [14/45]: FAILED
br-microblazeel-full [15/45]: OK
br-mipsel-o32-full [16/45]: FAILED
br-mips32r6-el-hf-glibc [17/45]: OK
br-mips64-n64-full [18/45]: FAILED
br-mips64r6-el-hf-glibc [19/45]: OK
br-m68k-5208-full [20/45]: SKIPPED
br-m68k-68040-full [21/45]: FAILED
br-nios2-glibc [22/45]: OK
br-openrisc-uclibc [23/45]: OK
br-powerpc-e500mc-full [24/45]: FAILED
br-powerpc-603e-basic-cpp [25/45]: FAILED
br-powerpc64le-power8-glibc [26/45]: OK
br-powerpc64-power7-glibc [27/45]: OK
br-riscv32 [28/45]: OK
br-riscv64 [29/45]: OK
br-riscv64-musl [30/45]: OK
br-sh4-full [31/45]: FAILED
br-sparc-uclibc [32/45]: FAILED
br-sparc64-glibc [33/45]: OK
br-xtensa-full [34/45]: FAILED
br-x86-64-core2-full [35/45]: FAILED
br-x86-64-musl [36/45]: OK
linaro-aarch64-be [37/45]: OKQuoted 8 lines
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips [43/45]: OK
sourcery-mips64 [44/45]: OK
sourcery-nios2 [45/45]: OKAll the build failures here are with pre-built uClibc toolchains... which are therefore using an older uClibc version than 1.0.35, which explains the failure.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 2/2 package/iproute2: bump version to 5.8.0
Hi Thomas,
Quoted 8 lines
Quoted 2 lines · On Thu, 3 Sep 2020 17:57:28 +0200 Petr Vorel <[email protected]> wrote:
For uclibc it requires v1.0.35, which contains
8bc41f131("Add {name, open}_to_handle_at() implementation").Since it requires uClibc 1.0.35, we need to hold a little bit on this one, until we rebuild all toolchains.
+1
Quoted 4 lines
Quoted 1 line
I tested this and it looks like the patch didn't apply, when tested with ./utils/test-pkg:
The patch didn't apply ? This doesn't make much sense. Perhaps you wanted to say "doesn't build" ?
Yes, sorry for confusing. Patch is ok, I just didn't realize that failures were due pre-built uClibc toolchains.
Quoted 46 lines
Quoted 37 lines
andes-nds32 [ 1/45]: OK arm-aarch64 [ 2/45]: OK bootlin-x86-64-glibc [ 3/45]: OK br-aarch64-glibc [ 4/45]: OK br-arcle-hs38 [ 5/45]: FAILED br-arm-basic [ 6/45]: FAILED br-arm-cortex-a9-glibc [ 7/45]: OK br-arm-cortex-a9-musl [ 8/45]: OK br-arm-cortex-m4-full [ 9/45]: SKIPPED br-arm-full [10/45]: FAILED br-arm-full-nothread [11/45]: FAILED br-arm-full-static [12/45]: FAILED br-i386-pentium-mmx-musl [13/45]: OK br-i386-pentium4-full [14/45]: FAILED br-microblazeel-full [15/45]: OK br-mipsel-o32-full [16/45]: FAILED br-mips32r6-el-hf-glibc [17/45]: OK br-mips64-n64-full [18/45]: FAILED br-mips64r6-el-hf-glibc [19/45]: OK br-m68k-5208-full [20/45]: SKIPPED br-m68k-68040-full [21/45]: FAILED br-nios2-glibc [22/45]: OK br-openrisc-uclibc [23/45]: OK br-powerpc-e500mc-full [24/45]: FAILED br-powerpc-603e-basic-cpp [25/45]: FAILED br-powerpc64le-power8-glibc [26/45]: OK br-powerpc64-power7-glibc [27/45]: OK br-riscv32 [28/45]: OK br-riscv64 [29/45]: OK br-riscv64-musl [30/45]: OK br-sh4-full [31/45]: FAILED br-sparc-uclibc [32/45]: FAILED br-sparc64-glibc [33/45]: OK br-xtensa-full [34/45]: FAILED br-x86-64-core2-full [35/45]: FAILED br-x86-64-musl [36/45]: OK linaro-aarch64-be [37/45]: OKQuoted 8 lines
linaro-aarch64 [38/45]: OK linaro-arm [39/45]: OK sourcery-arm-armv4t [40/45]: OK sourcery-arm [41/45]: OK sourcery-arm-thumb2 [42/45]: OK sourcery-mips [43/45]: OK sourcery-mips64 [44/45]: OK sourcery-nios2 [45/45]: OK
Quoted 3 lines
All the build failures here are with pre-built uClibc toolchains... which are therefore using an older uClibc version than 1.0.35, which explains the failure.
+1.
Quoted 1 line
Thomas
Kind regards,
Petr
PATCH v2 2/2 package/iproute2: bump version to 5.8.0
In reply to Thomas PetazzoniHi Thomas,
<snip>
Quoted 3 lines
All the build failures here are with pre-built uClibc toolchains... which are therefore using an older uClibc version than 1.0.35, which explains the failure.
I've prepared iproute2 5.9.0, but it's blocked by toolchain update. Could you please ping me when uClibc prebuilt toolchains are updated? Or where can I check it myself?
Quoted 1 line
Thomas
Kind regards,
Petr
Thomas Petazzoni
AppliedPATCH v2 1/2 package/uclibc: bump version to 1.0.35
In reply to Petr VorelQuoted 9 lines · On Thu, 3 Sep 2020 17:57:27 +0200 Petr Vorel <[email protected]> wrote:
Drop patch from this release.
Signed-off-by Petr Vorel <[email protected]>--- ...ude-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch | 68 ------------------- package/uclibc/uclibc.hash | 4 +- package/uclibc/uclibc.mk | 2 +- 3 files changed, 3 insertions(+), 71 deletions(-) delete mode 100644 package/uclibc/0001-mips-Do-not-include-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 1/2 package/uclibc: bump version to 1.0.35
In reply to Petr VorelHi Petr,
can you add the two patches from git on top, otherwise static linking fails for older gcc.
best regards
Waldemar
Petr Vorel wrote,
Quoted 111 lines
Drop patch from this release.
Signed-off-by Petr Vorel <[email protected]>--- ...ude-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch | 68 ------------------- package/uclibc/uclibc.hash | 4 +- package/uclibc/uclibc.mk | 2 +- 3 files changed, 3 insertions(+), 71 deletions(-) delete mode 100644 package/uclibc/0001-mips-Do-not-include-hi-and-lo-in-__SYSCALL_CLOBBERS-.patchpackage/uclibc/0001-mips-Do-not-include-hi-and-lo-in-__SYSCALL_CLOBBERS-.patch deleted +0
-68@@ -1,68 +0,0 @@ -From aad6cdbcff0f5411a09ac524637fea62652786a3 Mon Sep 17 00:00:00 2001 -From: Romain Naour <[email protected]> -Date: Fri, 8 May 2020 18:39:45 +0200 -Subject: [PATCH] mips: Do not include hi and lo in __SYSCALL_CLOBBERS for R6 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -From [1] -"GCC 10 (PR 91233) won't silently allow registers that are not architecturally -available to be present in the clobber list anymore, resulting in build failure -for mips*r6 targets in form of: -... -.../sysdep.h:146:2: error: the register ?lo? cannot be clobbered in ?asm? for the current target - 146 | __asm__ volatile ( \ - | ^~~~~~~ - -This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension. -This patch provides the alternative definitions of __SYSCALL_CLOBBERS for r6 -targets that won't include those registers." - -[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8 - -Signed-off-by: Romain Naour <[email protected]> -Cc: Waldemar Brodkorb <[email protected]> ---- - libc/sysdeps/linux/mips/bits/syscalls.h | 18 ++++++++++++++---- - 1 file changed, 14 insertions(+), 4 deletions(-) - -diff --git a/libc/sysdeps/linux/mips/bits/syscalls.h b/libc/sysdeps/linux/mips/bits/syscalls.h -index b8f80597e..13728ac55 100644 ---- a/libc/sysdeps/linux/mips/bits/syscalls.h -+++ b/libc/sysdeps/linux/mips/bits/syscalls.h -@@ -270,8 +270,13 @@ - _sys_result; \ - }) - --#define __SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", \ -- "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#if __mips_isa_rev >= 6 -+# define __SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "memory" -+#else -+# define __SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#endif - - #else /* N32 || N64 */ - -@@ -327,8 +332,13 @@ - _sys_result; \ - }) - --#define __SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ -- "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#if __mips_isa_rev >= 6 -+# define __SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "memory" -+#else -+# define __SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ -+ "$14", "$15", "$24", "$25", "hi", "lo", "memory" -+#endif - - #endif - --- -2.25.4 -package/uclibc/uclibc.hash +2
-2@@ -1,4 +1,4 @@ -# From https://downloads.uclibc-ng.org/releases/1.0.34/uClibc-ng-1.0.34.tar.xz.sha256 -sha256 e6776229eee8d3f5a1cd29fb4286630e3cb9e97dded4e8f4a3a9bb4fa8c0d5e3 uClibc-ng-1.0.34.tar.xz +# From https://downloads.uclibc-ng.org/releases/1.0.35/uClibc-ng-1.0.35.tar.xz.sha256 +sha256 4d0ee138f037017695a66b556b70f77a0eab8a238819bcb60af890b7b3382a2b uClibc-ng-1.0.35.tar.xz # Locally calculated sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIBpackage/uclibc/uclibc.mk +1
-1@@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_VERSION = 1.0.34 +UCLIBC_VERSION = 1.0.35 UCLIBC_SOURCE = uClibc-ng-$(UCLIBC_VERSION).tar.xz UCLIBC_SITE = https://downloads.uclibc-ng.org/releases/$(UCLIBC_VERSION) UCLIBC_LICENSE = LGPL-2.1+Signature · 1 line
2.28.0
PATCH v2 1/2 package/uclibc: bump version to 1.0.35
In reply to Petr VorelQuoted 3 lines · On Thu, 3 Sep 2020 17:57:27 +0200 Petr Vorel <[email protected]> wrote:
Drop patch from this release.
Signed-off-by Petr Vorel <[email protected]>
This is causing some build breakage:
http://autobuild.buildroot.net/results/938729c42d52bd9e74454bc34b2b20c4e0503142/build-end.log
http://autobuild.buildroot.net/results/bc50834820c921ce4927f23e4dcfa2aaa405c657/build-end.log
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com