Skip to contentSkip to conversation

package/libcap: fix build of host variant on systems without static libc

PATCH New Thomas Petazzoni 2 participants 3 messages Sep 4, 2020 – Sep 9, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/libcap: fix build of host variant on systems without static libc

Since the bump to 2.42 in 241e3bdea8b68b3ce78b1b76db29019fdcbb7b05, the host variant of libcap fails to build on systems that don't have the static variant of the C library installed. Indeed, libcap tries to build test programs statically, which fails with:

/usr/bin/ld: cannot find -lc
collect2: error: ld returned 1 exit status

This commit fixes that by:

(1) Adding a patch, submitted upstream, which makes the tests/Makefile obey the same DYNAMIC variable as the one used by progs/Makefile.

(2) Explicitly enable DYNAMIC in libcap.mk. It might seems strange to unconditionally enable it, but in fact what DYNAMIC=yes does is to disable the use of --static. So in practice in Buildroot, this means that the libcap build system will rely on the LDFLAGS passed by Buildroot to decide if static or dynamic linking should be done, which is good.

Fixes:

http://autobuild.buildroot.net/results/5ddca8a9d1e2c6353b628fbe8d65b440bfd4c440/

---
 ...on-t-build-statically-if-DYNAMIC-yes.patch | 58 +++++++++++++++++++
 package/libcap/libcap.mk                      |  6 +-
 2 files changed, 63 insertions(+), 1 deletion(-)
 create mode 100644 package/libcap/0001-tests-don-t-build-statically-if-DYNAMIC-yes.patch
package/libcap/0001-tests-don-t-build-statically-if-DYNAMIC-yes.patch new file +58 -0
new file mode 100644
index 0000000000..3483826899
@@ -0,0 +1,58 @@
+From 8c11d901010265e4214f29eeded27f64746d90d9 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Fri, 4 Sep 2020 16:55:30 +0200
+Subject: [PATCH] tests: don't build statically if DYNAMIC=yes
+
+This takes the same approach as the one used in progs/Makefile.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+---
+ tests/Makefile | 12 ++++++++----
+ 1 file changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/tests/Makefile b/tests/Makefile
+index 0c86ee8..5a01f78 100644
+--- a/tests/Makefile
++++ b/tests/Makefile
+@@ -5,6 +5,10 @@ topdir=$(shell pwd)/..
+ include ../Make.Rules
+ #
+ 
++ifneq ($(DYNAMIC),yes)
++LDFLAGS += --static
++endif
++
+ DEPS=../libcap/libcap.a ../libcap/libpsx.a
+ 
+ all: psx_test libcap_psx_test libcap_launch_test
+@@ -28,23 +32,23 @@ run_libcap_psx_test: libcap_psx_test
+ 	./libcap_psx_test
+ 
+ libcap_psx_test: libcap_psx_test.c $(DEPS)
+-	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create --static
++	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create $(LDFLAGS)
+ 
+ run_libcap_launch_test: libcap_launch_test libcap_psx_launch_test noop
+ 	sudo ./libcap_launch_test
+ 	sudo ./libcap_psx_launch_test
+ 
+ libcap_launch_test: libcap_launch_test.c $(DEPS)
+-	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) --static
++	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) $(LDFLAGS)
+ 
+ # this varies only slightly from the above insofar as it currently
+ # only links in the pthreads fork support. TODO() we need to change
+ # the source to do something interesting with pthreads.
+ libcap_psx_launch_test: libcap_launch_test.c $(DEPS)
+-	$(CC) $(CFLAGS) $(IPATH) -DWITH_PTHREADS $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create --static
++	$(CC) $(CFLAGS) $(IPATH) -DWITH_PTHREADS $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create $(LDFLAGS)
+ 
+ noop: noop.c
+-	$(CC) $(CFLAGS) $< -o $@ --static
++	$(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
+ 
+ clean:
+ 	rm -f psx_test libcap_psx_test libcap_launch_test *~
+-- 
+2.26.2
+
package/libcap/libcap.mk +5 -1
index 08c1bc9deb..6a35076f6e 100644
@@ -26,9 +26,12 @@ LIBCAP_MAKE_TARGET = all
 LIBCAP_MAKE_INSTALL_TARGET = install
 endif
 
+# DYNAMIC=yes doesn't really mean "dynamic", it means "don't pass
+# --static". So we let the default Buildroot LDFLAGS do their job.
 LIBCAP_MAKE_FLAGS = \
 	BUILD_CC="$(HOSTCC)" \
-	BUILD_CFLAGS="$(HOST_CFLAGS)"
+	BUILD_CFLAGS="$(HOST_CFLAGS)" \
+	DYNAMIC=yes
 
 ifeq ($(BR2_PACKAGE_LIBCAP_TOOLS),y)
 define LIBCAP_BUILD_TOOLS_CMDS
@@ -62,6 +65,7 @@ endef
 
 define HOST_LIBCAP_BUILD_CMDS
 	$(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D)\
+		DYNAMIC=yes \
 		RAISE_SETFCAP=no
 endef
 
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/1 package/libcap: fix build of host variant on systems without static libc

On 2020-09-04 17:15 +0200, Thomas Petazzoni spake thusly:

Quoted 5 lines

Since the bump to 2.42 in 241e3bdea8b68b3ce78b1b76db29019fdcbb7b05, the host variant of libcap fails to build on systems that don't have the static variant of the C library installed. Indeed, libcap tries to build test programs statically, which fails with:

Quoted 8 lines

/usr/bin/ld: cannot find -lc
collect2: error: ld returned 1 exit status

This commit fixes that by:

(1) Adding a patch, submitted upstream, which makes the tests/Makefile obey the same DYNAMIC variable as the one used by progs/Makefile.

But then it means that tests will run with a system-wide version of libcap if that exists, or would fail to run at all if libcap is not installed in the system, both really not being what is expected of the tests, I would think. So upstream will probably not be that thrilled about that patch, I'm afraid...

But seeing how some tests are run udner sudo, we can't use LD_LIBRARY_PATH.

Instead, I think we should womething like -Wl,-rpath,'$$ORIGN/../libcap'

Unless I missed something?

For Buildroot, I think we could instead just drop line 20in the top-level Makefile, and be done with it. If you properly follow up with upstream, we can drop that ptch when we update.

Quoted 6 lines

(2) Explicitly enable DYNAMIC in libcap.mk. It might seems strange to unconditionally enable it, but in fact what DYNAMIC=yes does is to disable the use of --static. So in practice in Buildroot, this means that the libcap build system will rely on the LDFLAGS passed by Buildroot to decide if static or dynamic linking should be done, which is good.

I think this warrants being applied separately on its own, separately from the patch to fix-or-disable the tests.

Thoughts?

Regards,
Yann E. MORIN.

Quoted 108 lines

Fixes:

http://autobuild.buildroot.net/results/5ddca8a9d1e2c6353b628fbe8d65b440bfd4c440/

---
 ...on-t-build-statically-if-DYNAMIC-yes.patch | 58 +++++++++++++++++++
 package/libcap/libcap.mk                      |  6 +-
 2 files changed, 63 insertions(+), 1 deletion(-)
 create mode 100644 package/libcap/0001-tests-don-t-build-statically-if-DYNAMIC-yes.patch
package/libcap/0001-tests-don-t-build-statically-if-DYNAMIC-yes.patch new file +58 -0
new file mode 100644
index 0000000000..3483826899
@@ -0,0 +1,58 @@
+From 8c11d901010265e4214f29eeded27f64746d90d9 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Fri, 4 Sep 2020 16:55:30 +0200
+Subject: [PATCH] tests: don't build statically if DYNAMIC=yes
+
+This takes the same approach as the one used in progs/Makefile.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+---
+ tests/Makefile | 12 ++++++++----
+ 1 file changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/tests/Makefile b/tests/Makefile
+index 0c86ee8..5a01f78 100644
+--- a/tests/Makefile
++++ b/tests/Makefile
+@@ -5,6 +5,10 @@ topdir=$(shell pwd)/..
+ include ../Make.Rules
+ #
+ 
++ifneq ($(DYNAMIC),yes)
++LDFLAGS += --static
++endif
++
+ DEPS=../libcap/libcap.a ../libcap/libpsx.a
+ 
+ all: psx_test libcap_psx_test libcap_launch_test
+@@ -28,23 +32,23 @@ run_libcap_psx_test: libcap_psx_test
+ 	./libcap_psx_test
+ 
+ libcap_psx_test: libcap_psx_test.c $(DEPS)
+-	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create --static
++	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create $(LDFLAGS)
+ 
+ run_libcap_launch_test: libcap_launch_test libcap_psx_launch_test noop
+ 	sudo ./libcap_launch_test
+ 	sudo ./libcap_psx_launch_test
+ 
+ libcap_launch_test: libcap_launch_test.c $(DEPS)
+-	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) --static
++	$(CC) $(CFLAGS) $(IPATH) $< -o $@ $(LIBCAPLIB) $(LDFLAGS)
+ 
+ # this varies only slightly from the above insofar as it currently
+ # only links in the pthreads fork support. TODO() we need to change
+ # the source to do something interesting with pthreads.
+ libcap_psx_launch_test: libcap_launch_test.c $(DEPS)
+-	$(CC) $(CFLAGS) $(IPATH) -DWITH_PTHREADS $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create --static
++	$(CC) $(CFLAGS) $(IPATH) -DWITH_PTHREADS $< -o $@ $(LIBCAPLIB) $(LIBPSXLIB) -Wl,-wrap,pthread_create $(LDFLAGS)
+ 
+ noop: noop.c
+-	$(CC) $(CFLAGS) $< -o $@ --static
++	$(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
+ 
+ clean:
+ 	rm -f psx_test libcap_psx_test libcap_launch_test *~
+-- 
+2.26.2
+
package/libcap/libcap.mk +5 -1
index 08c1bc9deb..6a35076f6e 100644
@@ -26,9 +26,12 @@ LIBCAP_MAKE_TARGET = all
 LIBCAP_MAKE_INSTALL_TARGET = install
 endif
 
+# DYNAMIC=yes doesn't really mean "dynamic", it means "don't pass
+# --static". So we let the default Buildroot LDFLAGS do their job.
 LIBCAP_MAKE_FLAGS = \
 	BUILD_CC="$(HOSTCC)" \
-	BUILD_CFLAGS="$(HOST_CFLAGS)"
+	BUILD_CFLAGS="$(HOST_CFLAGS)" \
+	DYNAMIC=yes
 
 ifeq ($(BR2_PACKAGE_LIBCAP_TOOLS),y)
 define LIBCAP_BUILD_TOOLS_CMDS
@@ -62,6 +65,7 @@ endef
 
 define HOST_LIBCAP_BUILD_CMDS
 	$(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D)\
+		DYNAMIC=yes \
 		RAISE_SETFCAP=no
 endef
 
Signature · 6 lines
2.26.2

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#2 lore raw

PATCH 1/1 package/libcap: fix build of host variant on systems without static libc

Hello,

Quoted 21 lines · On Fri, 4 Sep 2020 23:01:37 +0200 "Yann E. MORIN" <[email protected]>…

On 2020-09-04 17:15 +0200, Thomas Petazzoni spake thusly:

Quoted 5 lines

Since the bump to 2.42 in 241e3bdea8b68b3ce78b1b76db29019fdcbb7b05, the host variant of libcap fails to build on systems that don't have the static variant of the C library installed. Indeed, libcap tries to build test programs statically, which fails with:

Quoted 8 lines

/usr/bin/ld: cannot find -lc
collect2: error: ld returned 1 exit status

This commit fixes that by:

(1) Adding a patch, submitted upstream, which makes the tests/Makefile obey the same DYNAMIC variable as the one used by progs/Makefile.

But then it means that tests will run with a system-wide version of libcap if that exists, or would fail to run at all if libcap is not installed in the system, both really not being what is expected of the tests, I would think. So upstream will probably not be that thrilled about that patch, I'm afraid...

Quoted 6 lines

But seeing how some tests are run udner sudo, we can't use LD_LIBRARY_PATH.

Instead, I think we should womething like -Wl,-rpath,'$$ORIGN/../libcap'

Unless I missed something?

I have sent a new version of the patch, which uses fixes from upstream, and for the tests, they use LD_LIBRARY_PATH to use the locally available shared library.

See https://patchwork.ozlabs.org/project/buildroot/patch/20200909210250.1093461-1-thomas.petazzoni at bootlin.com/

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com