Skip to contentSkip to conversation

dt-bindings: Add YAML schemas for Gen3 PCIe controller

PATCH New Jianjun Wang 1 participant 3 messages Sep 7, 2020

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 dt-bindings: Add YAML schemas for Gen3 PCIe controller

Add YAML schemas documentation for Gen3 PCIe controller on MediaTek SoCs.

Change-Id I2a022c7291c7e7e161b3a7e8bce28781e0f09b90
---
 .../bindings/pci/mediatek-pcie-gen3.yaml      | 158 ++++++++++++++++++
 1 file changed, 158 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml new file +158 -0
new file mode 100644
index 000000000000..108d29259c05
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Jianjun Wang <[email protected]>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,gen3-pcie
+      - const: mediatek,mt8192-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+
+  reg-names:
+    items:
+      - const: pcie-mac
+
+  interrupts:
+    maxItems: 1
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    anyOf:
+      - const: mac-rst
+      - const: phy-rst
+
+  clocks:
+    maxItems: 5
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+      "#interrupt-cells":
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+
+required:
+  - compatible
+  - device_type
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+  - bus-range
+  - interrupts
+  - ranges
+  - clocks
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+  - legacy-interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@11230000 {
+            compatible = "mediatek,mt8192-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x00 0x11230000 0x00 0x4000>;
+            reg-names = "pcie-mac";
+            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0x00 0x12000000 0x00 0x12000000 0x00 0x1000000>;
+            clocks = <&infracfg 40>,
+                     <&infracfg 43>,
+                     <&infracfg 97>,
+                     <&infracfg 99>,
+                     <&infracfg 111>;
+            assigned-clocks = <&topckgen 50>;
+            assigned-clock-parents = <&topckgen 91>;
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy";
+            resets = <&infracfg_rst 0>;
+            reset-names = "phy-rst";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                            <0 0 0 2 &pcie_intc 1>,
+                            <0 0 0 3 &pcie_intc 2>,
+                            <0 0 0 4 &pcie_intc 3>;
+            pcie_intc: legacy-interrupt-controller {
+                      #address-cells = <0>;
+                      #interrupt-cells = <1>;
+                      interrupt-controller;
+            };
+        };
+    };
Signature · 1 line
2.18.0
#1 lore raw

PATCH 2/3 PCI: mediatek: Add new generation controller support

MediaTek's PCIe host controller has three generation HWs, the new generation HW is an individual bridge, it supoorts Gen3 speed and up to 256 MSI interrupt numbers for multi-function devices.

Add support for new Gen3 controller which can be found on MT8192.

---
 drivers/pci/controller/Kconfig              |   14 +
 drivers/pci/controller/Makefile             |    1 +
 drivers/pci/controller/pcie-mediatek-gen3.c | 1063 +++++++++++++++++++
 3 files changed, 1078 insertions(+)
 create mode 100644 drivers/pci/controller/pcie-mediatek-gen3.c
drivers/pci/controller/Kconfig +14 -0
index f18c3725ef80..83daa772595b 100644
@@ -239,6 +239,20 @@ config PCIE_MEDIATEK
 	  Say Y here if you want to enable PCIe controller support on
 	  MediaTek SoCs.
 
+config PCIE_MEDIATEK_GEN3
+	tristate "MediaTek GEN3 PCIe controller"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI_IRQ_DOMAIN
+	help
+	  Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
+	  This PCIe controller provides the capable of Gen3, Gen2 and
+	  Gen1 speed, and support up to 256 MSI interrupt numbers for
+	  multi-function devices.
+
+	  Say Y here if you want to enable Gen3 PCIe controller support on
+	  MediaTek SoCs.
+
 config PCIE_TANGO_SMP8759
 	bool "Tango SMP8759 PCIe controller (DANGEROUS)"
 	depends on ARCH_TANGO && PCI_MSI && OF
drivers/pci/controller/Makefile +1 -0
index bcdbf49ab1e4..9c1b96777597 100644
@@ -27,6 +27,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
 obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
 obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
+obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
drivers/pci/controller/pcie-mediatek-gen3.c new file +1063 -0

1,063 lines not on this page · raw message

Signature · 1 line
2.18.0
#2 lore raw

PATCH 3/3 MAINTAINERS: update entry for MediaTek PCIe controller

In reply to Jianjun Wang

Add maintainer for MediaTek PCIe controller driver.

---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index deaafb617361..5c6110468526 100644
@@ -13459,6 +13459,7 @@ F:	drivers/pci/controller/dwc/pcie-histb.c
 
 PCIE DRIVER FOR MEDIATEK
 M:	Ryder Lee <[email protected]>
+M:	Jianjun Wang <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Supported
Signature · 1 line
2.18.0