net: dsa: link interfaces with the DSA master to get rid of lockdep warnings
Subsystems (3)
Vladimir Oltean
maintainerPATCH v2 1/1 net: dsa: link interfaces with the DSA master to get rid of lockdep warnings
Since commit 845e0ebb4408 ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning:
============================================
WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted
--------------------------------------------
dhcpcd/323 is trying to acquire lock:ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90
but task is already holding lock:ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
---- lock(&dsa_master_addr_list_lock_key/1);
lock(&dsa_master_addr_list_lock_key/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by dhcpcd/323:
#0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
#1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90
stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180
Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master.
We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses.
There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice().
Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions.
---
Changes in v2:
* Try to maintain an error path order which is similar to the one from the deregistration path.
* Keep the RTNL for register_netdevice() followed by netdev_upper_dev_link(), to avoid user space from trying to use the interface without an upper link.
net/dsa/slave.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
net/dsa/slave.c +16 -2
@@ -1800,15 +1800,27 @@ int dsa_slave_create(struct dsa_port *port)dsa_slave_notify (slave_dev,DSA_PORT_REGISTER ); - ret =register_netdev (slave_dev); +rtnl_lock (); + + ret =register_netdevice (slave_dev);if (ret) {netdev_err (master,"error %d registering interface %s\n" , ret, slave_dev->name); +rtnl_unlock (); goto out_phy; } + ret =netdev_upper_dev_link (master, slave_dev,NULL ); + +rtnl_unlock (); + +if (ret) + goto out_unregister; +return 0 ; +out_unregister: +unregister_netdev (slave_dev); out_phy:rtnl_lock ();phylink_disconnect_phy (p->dp->pl);
@@ -1825,16 +1837,18 @@ int dsa_slave_create(struct dsa_port *port)void dsa_slave_destroy (struct net_device *slave_dev) { +struct net_device *master =dsa_slave_to_master (slave_dev);struct dsa_port *dp =dsa_slave_to_port (slave_dev);struct dsa_slave_priv *p =netdev_priv (slave_dev);netif_carrier_off (slave_dev);rtnl_lock (); +netdev_upper_dev_unlink (master, slave_dev); +unregister_netdevice (slave_dev);phylink_disconnect_phy (dp->pl);rtnl_unlock ();dsa_slave_notify (slave_dev,DSA_PORT_UNREGISTER ); -unregister_netdev (slave_dev);phylink_destroy (dp->pl);gro_cells_destroy (&p->gcells);free_percpu (p->stats64);
Signature · 1 line
2.25.1
Quoted 83 lines · Vladimir Oltean
Since commit
845e0ebb4408("net: changeaddr_list_lockback to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning:============================================
WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted
--------------------------------------------
dhcpcd/323 is trying to acquire lock:ffff000066dd4268(&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at:dev_mc_sync+0x44/0x90but task is already holding lock:
ffff00006608c268(&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at:dev_mc_sync+0x44/0x90other info that might help us debug this:
Possible unsafe locking scenario:CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1);*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by dhcpcd/323:
#0:ffffdbd1381dda18(rtnl_mutex){+.+.}-{3:3}, at:rtnl_lock+0x24/0x30
#1:ffff00006614b268(_xmit_ETHER){+...}-{2:2}, at:dev_set_rx_mode+0x28/0x48#2:ffff00006608c268(&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at:dev_mc_sync+0x44/0x90stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the
dev->lower_levelvalue of a DSA switch interface would be 1, which would warn when it is a DSA master.We can use
netdev_upper_dev_link()to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses.There might be a chance that somebody will try to take hold of this interface and use it immediately after
register_netdev()and beforenetdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin ofregister_netdev(), which isregister_netdevice().Since this warning was not there when lockdep was using dynamic keys for
addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions.
Quoted 3 lines
Fixes 845e0ebb4408 ("net: change addr_list_lock back to static key")Suggested-by Cong Wang <[email protected]>Signed-off-by Vladimir Oltean <[email protected]>
I was worried for a second that dsa_slave_notify(slave_dev, DSA_PORT_UNREGISTER) would no longer work after your changes, but we are only providing references to both slave_dev and master and this actually makes the unregister symmetrical with the register whereby the slave_dev reference is not in a registered state for both events.
Signature · 1 line
Florian
David Miller
maintainerFrom: Vladimir Oltean <[email protected]>
Date: Tue, 8 Sep 2020 02:48:42 +0300
Quoted 3 lines
Since commit
845e0ebb4408("net: changeaddr_list_lockback to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning:
...
Quoted 23 lines
Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the
dev->lower_levelvalue of a DSA switch interface would be 1, which would warn when it is a DSA master.We can use
netdev_upper_dev_link()to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses.There might be a chance that somebody will try to take hold of this interface and use it immediately after
register_netdev()and beforenetdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin ofregister_netdev(), which isregister_netdevice().Since this warning was not there when lockdep was using dynamic keys for
addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions.
Quoted 3 lines
Fixes 845e0ebb4408 ("net: change addr_list_lock back to static key")Suggested-by Cong Wang <[email protected]>Signed-off-by Vladimir Oltean <[email protected]>
Applied and queued up for v5.8 -stable, thanks.